summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-sead3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-sead3.c')
-rw-r--r--drivers/usb/host/ehci-sead3.c74
1 files changed, 3 insertions, 71 deletions
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index cc199e87a7a9..58c96bd50d22 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -160,84 +160,16 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
static int ehci_hcd_sead3_drv_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- unsigned long flags;
- int rc = 0;
-
- if (time_before(jiffies, ehci->next_statechange))
- msleep(20);
-
- /* Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible. The PM and USB cores make sure that
- * the root hub is either suspended or stopped.
- */
- ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
- spin_lock_irqsave(&ehci->lock, flags);
- ehci_writel(ehci, 0, &ehci->regs->intr_enable);
- (void)ehci_readl(ehci, &ehci->regs->intr_enable);
-
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
- spin_unlock_irqrestore(&ehci->lock, flags);
+ bool do_wakeup = device_may_wakeup(dev);
- /* could save FLADJ in case of Vaux power loss
- * ... we'd only use it to handle clock skew
- */
-
- return rc;
+ return ehci_suspend(hcd, do_wakeup);
}
static int ehci_hcd_sead3_drv_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
- /* maybe restore FLADJ. */
-
- if (time_before(jiffies, ehci->next_statechange))
- msleep(100);
-
- /* Mark hardware accessible again as we are out of D3 state by now */
- set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
- /* If CF is still set, we maintained PCI Vaux power.
- * Just undo the effect of ehci_pci_suspend().
- */
- if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
- int mask = INTR_MASK;
-
- ehci_prepare_ports_for_controller_resume(ehci);
- if (!hcd->self.root_hub->do_remote_wakeup)
- mask &= ~STS_PCD;
- ehci_writel(ehci, mask, &ehci->regs->intr_enable);
- ehci_readl(ehci, &ehci->regs->intr_enable);
- return 0;
- }
-
- ehci_dbg(ehci, "lost power, restarting\n");
- usb_root_hub_lost_power(hcd->self.root_hub);
-
- /* Else reset, to cope with power loss or flush-to-storage
- * style "resume" having let BIOS kick in during reboot.
- */
- (void) ehci_halt(ehci);
- (void) ehci_reset(ehci);
-
- /* emptying the schedule aborts any urbs */
- spin_lock_irq(&ehci->lock);
- if (ehci->reclaim)
- end_unlink_async(ehci);
- ehci_work(ehci);
- spin_unlock_irq(&ehci->lock);
-
- ehci_writel(ehci, ehci->command, &ehci->regs->command);
- ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
- ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
-
- /* here we "know" root ports should always stay powered */
- ehci_port_power(ehci, 1);
-
- ehci->rh_state = EHCI_RH_SUSPENDED;
+ ehci_resume(hcd, false);
return 0;
}