diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/dwc3/core.c | 471 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.h | 29 |
2 files changed, 246 insertions, 254 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 3ee70ffaf003..fc60d5f564dd 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -534,90 +534,6 @@ void dwc3_event_buffers_cleanup(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GEVNTCOUNT(0), 0); } -static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) -{ - if (!dwc->has_hibernation) - return 0; - - if (!dwc->nr_scratch) - return 0; - - dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, - DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); - if (!dwc->scratchbuf) - return -ENOMEM; - - return 0; -} - -static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) -{ - dma_addr_t scratch_addr; - u32 param; - int ret; - - if (!dwc->has_hibernation) - return 0; - - if (!dwc->nr_scratch) - return 0; - - /* should never fall here */ - if (!WARN_ON(dwc->scratchbuf)) - return 0; - - scratch_addr = dma_map_single(dwc->sysdev, dwc->scratchbuf, - dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, - DMA_BIDIRECTIONAL); - if (dma_mapping_error(dwc->sysdev, scratch_addr)) { - dev_err(dwc->sysdev, "failed to map scratch buffer\n"); - ret = -EFAULT; - goto err0; - } - - dwc->scratch_addr = scratch_addr; - - param = lower_32_bits(scratch_addr); - - ret = dwc3_send_gadget_generic_command(dwc, - DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); - if (ret < 0) - goto err1; - - param = upper_32_bits(scratch_addr); - - ret = dwc3_send_gadget_generic_command(dwc, - DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); - if (ret < 0) - goto err1; - - return 0; - -err1: - dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch * - DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); - -err0: - return ret; -} - -static void dwc3_free_scratch_buffers(struct dwc3 *dwc) -{ - if (!dwc->has_hibernation) - return; - - if (!dwc->nr_scratch) - return; - - /* should never fall here */ - if (!WARN_ON(dwc->scratchbuf)) - return; - - dma_unmap_single(dwc->sysdev, dwc->scratch_addr, dwc->nr_scratch * - DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); - kfree(dwc->scratchbuf); -} - static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -800,11 +716,91 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; + /* + * Some ULPI USB PHY does not support internal VBUS supply, to drive + * the CPEN pin requires the configuration of the ULPI DRVVBUSEXTERNAL + * bit of OTG_CTRL register. Controller configures the USB2 PHY + * ULPIEXTVBUSDRV bit[17] of the GUSB2PHYCFG register to drive vBus + * with an external supply. + */ + if (dwc->ulpi_ext_vbus_drv) + reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); return 0; } +static int dwc3_phy_init(struct dwc3 *dwc) +{ + int ret; + + usb_phy_init(dwc->usb2_phy); + usb_phy_init(dwc->usb3_phy); + + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + goto err_shutdown_usb3_phy; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) + goto err_exit_usb2_phy; + + return 0; + +err_exit_usb2_phy: + phy_exit(dwc->usb2_generic_phy); +err_shutdown_usb3_phy: + usb_phy_shutdown(dwc->usb3_phy); + usb_phy_shutdown(dwc->usb2_phy); + + return ret; +} + +static void dwc3_phy_exit(struct dwc3 *dwc) +{ + phy_exit(dwc->usb3_generic_phy); + phy_exit(dwc->usb2_generic_phy); + + usb_phy_shutdown(dwc->usb3_phy); + usb_phy_shutdown(dwc->usb2_phy); +} + +static int dwc3_phy_power_on(struct dwc3 *dwc) +{ + int ret; + + usb_phy_set_suspend(dwc->usb2_phy, 0); + usb_phy_set_suspend(dwc->usb3_phy, 0); + + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + goto err_suspend_usb3_phy; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_power_off_usb2_phy; + + return 0; + +err_power_off_usb2_phy: + phy_power_off(dwc->usb2_generic_phy); +err_suspend_usb3_phy: + usb_phy_set_suspend(dwc->usb3_phy, 1); + usb_phy_set_suspend(dwc->usb2_phy, 1); + + return ret; +} + +static void dwc3_phy_power_off(struct dwc3 *dwc) +{ + phy_power_off(dwc->usb3_generic_phy); + phy_power_off(dwc->usb2_generic_phy); + + usb_phy_set_suspend(dwc->usb3_phy, 1); + usb_phy_set_suspend(dwc->usb2_phy, 1); +} + static int dwc3_clk_enable(struct dwc3 *dwc) { int ret; @@ -821,8 +817,20 @@ static int dwc3_clk_enable(struct dwc3 *dwc) if (ret) goto disable_ref_clk; + ret = clk_prepare_enable(dwc->utmi_clk); + if (ret) + goto disable_susp_clk; + + ret = clk_prepare_enable(dwc->pipe_clk); + if (ret) + goto disable_utmi_clk; + return 0; +disable_utmi_clk: + clk_disable_unprepare(dwc->utmi_clk); +disable_susp_clk: + clk_disable_unprepare(dwc->susp_clk); disable_ref_clk: clk_disable_unprepare(dwc->ref_clk); disable_bus_clk: @@ -832,6 +840,8 @@ disable_bus_clk: static void dwc3_clk_disable(struct dwc3 *dwc) { + clk_disable_unprepare(dwc->pipe_clk); + clk_disable_unprepare(dwc->utmi_clk); clk_disable_unprepare(dwc->susp_clk); clk_disable_unprepare(dwc->ref_clk); clk_disable_unprepare(dwc->bus_clk); @@ -840,17 +850,8 @@ static void dwc3_clk_disable(struct dwc3 *dwc) static void dwc3_core_exit(struct dwc3 *dwc) { dwc3_event_buffers_cleanup(dwc); - - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); - - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - + dwc3_phy_power_off(dwc); + dwc3_phy_exit(dwc); dwc3_clk_disable(dwc); reset_control_assert(dwc->reset); } @@ -877,7 +878,6 @@ static bool dwc3_core_is_valid(struct dwc3 *dwc) static void dwc3_core_setup_global_control(struct dwc3 *dwc) { - u32 hwparams4 = dwc->hwparams.hwparams4; u32 reg; reg = dwc3_readl(dwc->regs, DWC3_GCTL); @@ -905,9 +905,6 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) reg &= ~DWC3_GCTL_DSBLCLKGTNG; break; case DWC3_GHWPARAMS1_EN_PWROPT_HIB: - /* enable hibernation here */ - dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); - /* * REVISIT Enabling this bit so that host-mode hibernation * will work. Device-mode hibernation is not yet implemented. @@ -1096,7 +1093,7 @@ static int dwc3_core_init(struct dwc3 *dwc) ret = dwc3_phy_setup(dwc); if (ret) - goto err0; + return ret; if (!dwc->ulpi_ready) { ret = dwc3_core_ulpi_init(dwc); @@ -1105,7 +1102,7 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_core_soft_reset(dwc); ret = -EPROBE_DEFER; } - goto err0; + return ret; } dwc->ulpi_ready = true; } @@ -1113,25 +1110,17 @@ static int dwc3_core_init(struct dwc3 *dwc) if (!dwc->phys_ready) { ret = dwc3_core_get_phy(dwc); if (ret) - goto err0a; + goto err_exit_ulpi; dwc->phys_ready = true; } - usb_phy_init(dwc->usb2_phy); - usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - goto err0a; - - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) { - phy_exit(dwc->usb2_generic_phy); - goto err0a; - } + ret = dwc3_phy_init(dwc); + if (ret) + goto err_exit_ulpi; ret = dwc3_core_soft_reset(dwc); if (ret) - goto err1; + goto err_exit_phy; if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { @@ -1151,10 +1140,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_core_setup_global_control(dwc); dwc3_core_num_eps(dwc); - ret = dwc3_setup_scratch_buffers(dwc); - if (ret) - goto err1; - /* Set power down scale of suspend_clk */ dwc3_set_power_down_clk_scale(dwc); @@ -1166,20 +1151,14 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_set_incr_burst_type(dwc); - usb_phy_set_suspend(dwc->usb2_phy, 0); - usb_phy_set_suspend(dwc->usb3_phy, 0); - ret = phy_power_on(dwc->usb2_generic_phy); - if (ret < 0) - goto err2; - - ret = phy_power_on(dwc->usb3_generic_phy); - if (ret < 0) - goto err3; + ret = dwc3_phy_power_on(dwc); + if (ret) + goto err_exit_phy; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err4; + goto err_power_off_phy; } /* @@ -1233,6 +1212,9 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->parkmode_disable_ss_quirk) reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; + if (dwc->parkmode_disable_hs_quirk) + reg |= DWC3_GUCTL1_PARKMODE_DISABLE_HS; + if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) && (dwc->maximum_speed == USB_SPEED_HIGH || dwc->maximum_speed == USB_SPEED_FULL)) @@ -1280,26 +1262,13 @@ static int dwc3_core_init(struct dwc3 *dwc) return 0; -err4: - phy_power_off(dwc->usb3_generic_phy); - -err3: - phy_power_off(dwc->usb2_generic_phy); - -err2: - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - -err1: - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - -err0a: +err_power_off_phy: + dwc3_phy_power_off(dwc); +err_exit_phy: + dwc3_phy_exit(dwc); +err_exit_ulpi: dwc3_ulpi_exit(dwc); -err0: return ret; } @@ -1537,8 +1506,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-tx-ipgap-linecheck-quirk"); dwc->resume_hs_terminations = device_property_read_bool(dev, "snps,resume-hs-terminations"); + dwc->ulpi_ext_vbus_drv = device_property_read_bool(dev, + "snps,ulpi-ext-vbus-drv"); dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, "snps,parkmode-disable-ss-quirk"); + dwc->parkmode_disable_hs_quirk = device_property_read_bool(dev, + "snps,parkmode-disable-hs-quirk"); dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, "snps,gfladj-refclk-lpm-sel-quirk"); @@ -1734,16 +1707,84 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc) return edev; } +static int dwc3_get_clocks(struct dwc3 *dwc) +{ + struct device *dev = dwc->dev; + + if (!dev->of_node) + return 0; + + /* + * Clocks are optional, but new DT platforms should support all clocks + * as required by the DT-binding. + * Some devices have different clock names in legacy device trees, + * check for them to retain backwards compatibility. + */ + dwc->bus_clk = devm_clk_get_optional(dev, "bus_early"); + if (IS_ERR(dwc->bus_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + } + + if (dwc->bus_clk == NULL) { + dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk"); + if (IS_ERR(dwc->bus_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + } + } + + dwc->ref_clk = devm_clk_get_optional(dev, "ref"); + if (IS_ERR(dwc->ref_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + } + + if (dwc->ref_clk == NULL) { + dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk"); + if (IS_ERR(dwc->ref_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + } + } + + dwc->susp_clk = devm_clk_get_optional(dev, "suspend"); + if (IS_ERR(dwc->susp_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + } + + if (dwc->susp_clk == NULL) { + dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk"); + if (IS_ERR(dwc->susp_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + } + } + + dwc->utmi_clk = devm_clk_get_optional(dev, "utmi"); + if (IS_ERR(dwc->utmi_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->utmi_clk), + "could not get utmi clock\n"); + } + + dwc->pipe_clk = devm_clk_get_optional(dev, "pipe"); + if (IS_ERR(dwc->pipe_clk)) { + return dev_err_probe(dev, PTR_ERR(dwc->pipe_clk), + "could not get pipe clock\n"); + } + + return 0; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct resource *res, dwc_res; + void __iomem *regs; struct dwc3 *dwc; - int ret; - void __iomem *regs; - dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) return -ENOMEM; @@ -1769,6 +1810,17 @@ static int dwc3_probe(struct platform_device *pdev) dwc_res = *res; dwc_res.start += DWC3_GLOBALS_REGS_START; + if (dev->of_node) { + struct device_node *parent = of_get_parent(dev->of_node); + + if (of_device_is_compatible(parent, "realtek,rtd-dwc3")) { + dwc_res.start -= DWC3_GLOBALS_REGS_START; + dwc_res.start += DWC3_RTK_RTD_GLOBALS_REGS_START; + } + + of_node_put(parent); + } + regs = devm_ioremap_resource(dev, &dwc_res); if (IS_ERR(regs)) return PTR_ERR(regs); @@ -1781,77 +1833,25 @@ static int dwc3_probe(struct platform_device *pdev) dwc->reset = devm_reset_control_array_get_optional_shared(dev); if (IS_ERR(dwc->reset)) { ret = PTR_ERR(dwc->reset); - goto put_usb_psy; + goto err_put_psy; } - if (dev->of_node) { - /* - * Clocks are optional, but new DT platforms should support all - * clocks as required by the DT-binding. - * Some devices have different clock names in legacy device trees, - * check for them to retain backwards compatibility. - */ - dwc->bus_clk = devm_clk_get_optional(dev, "bus_early"); - if (IS_ERR(dwc->bus_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); - goto put_usb_psy; - } - - if (dwc->bus_clk == NULL) { - dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk"); - if (IS_ERR(dwc->bus_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); - goto put_usb_psy; - } - } - - dwc->ref_clk = devm_clk_get_optional(dev, "ref"); - if (IS_ERR(dwc->ref_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); - goto put_usb_psy; - } - - if (dwc->ref_clk == NULL) { - dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk"); - if (IS_ERR(dwc->ref_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); - goto put_usb_psy; - } - } - - dwc->susp_clk = devm_clk_get_optional(dev, "suspend"); - if (IS_ERR(dwc->susp_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); - goto put_usb_psy; - } - - if (dwc->susp_clk == NULL) { - dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk"); - if (IS_ERR(dwc->susp_clk)) { - ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); - goto put_usb_psy; - } - } - } + ret = dwc3_get_clocks(dwc); + if (ret) + goto err_put_psy; ret = reset_control_deassert(dwc->reset); if (ret) - goto put_usb_psy; + goto err_put_psy; ret = dwc3_clk_enable(dwc); if (ret) - goto assert_reset; + goto err_assert_reset; if (!dwc3_core_is_valid(dwc)) { dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n"); ret = -ENODEV; - goto disable_clks; + goto err_disable_clks; } platform_set_drvdata(pdev, dwc); @@ -1861,7 +1861,7 @@ static int dwc3_probe(struct platform_device *pdev) DWC3_GHWPARAMS0_AWIDTH(dwc->hwparams.hwparams0) == 64) { ret = dma_set_mask_and_coherent(dwc->sysdev, DMA_BIT_MASK(64)); if (ret) - goto disable_clks; + goto err_disable_clks; } spin_lock_init(&dwc->lock); @@ -1879,27 +1879,23 @@ static int dwc3_probe(struct platform_device *pdev) if (ret) { dev_err(dwc->dev, "failed to allocate event buffers\n"); ret = -ENOMEM; - goto err2; + goto err_allow_rpm; } dwc->edev = dwc3_get_extcon(dwc); if (IS_ERR(dwc->edev)) { ret = dev_err_probe(dwc->dev, PTR_ERR(dwc->edev), "failed to get extcon\n"); - goto err3; + goto err_free_event_buffers; } ret = dwc3_get_dr_mode(dwc); if (ret) - goto err3; - - ret = dwc3_alloc_scratch_buffers(dwc); - if (ret) - goto err3; + goto err_free_event_buffers; ret = dwc3_core_init(dwc); if (ret) { dev_err_probe(dev, ret, "failed to initialize core\n"); - goto err4; + goto err_free_event_buffers; } dwc3_check_params(dwc); @@ -1907,51 +1903,38 @@ static int dwc3_probe(struct platform_device *pdev) ret = dwc3_core_init_mode(dwc); if (ret) - goto err5; + goto err_exit_debugfs; pm_runtime_put(dev); return 0; -err5: +err_exit_debugfs: dwc3_debugfs_exit(dwc); dwc3_event_buffers_cleanup(dwc); - - usb_phy_set_suspend(dwc->usb2_phy, 1); - usb_phy_set_suspend(dwc->usb3_phy, 1); - phy_power_off(dwc->usb2_generic_phy); - phy_power_off(dwc->usb3_generic_phy); - - usb_phy_shutdown(dwc->usb2_phy); - usb_phy_shutdown(dwc->usb3_phy); - phy_exit(dwc->usb2_generic_phy); - phy_exit(dwc->usb3_generic_phy); - + dwc3_phy_power_off(dwc); + dwc3_phy_exit(dwc); dwc3_ulpi_exit(dwc); - -err4: - dwc3_free_scratch_buffers(dwc); - -err3: +err_free_event_buffers: dwc3_free_event_buffers(dwc); - -err2: +err_allow_rpm: pm_runtime_allow(dev); pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); pm_runtime_set_suspended(dev); pm_runtime_put_noidle(dev); -disable_clks: +err_disable_clks: dwc3_clk_disable(dwc); -assert_reset: +err_assert_reset: reset_control_assert(dwc->reset); -put_usb_psy: +err_put_psy: if (dwc->usb_psy) power_supply_put(dwc->usb_psy); return ret; } -static int dwc3_remove(struct platform_device *pdev) +static void dwc3_remove(struct platform_device *pdev) { struct dwc3 *dwc = platform_get_drvdata(pdev); @@ -1965,6 +1948,7 @@ static int dwc3_remove(struct platform_device *pdev) pm_runtime_allow(&pdev->dev); pm_runtime_disable(&pdev->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); /* * HACK: Clear the driver data, which is currently accessed by parent @@ -1974,12 +1958,9 @@ static int dwc3_remove(struct platform_device *pdev) pm_runtime_set_suspended(&pdev->dev); dwc3_free_event_buffers(dwc); - dwc3_free_scratch_buffers(dwc); if (dwc->usb_psy) power_supply_put(dwc->usb_psy); - - return 0; } #ifdef CONFIG_PM @@ -2290,7 +2271,7 @@ MODULE_DEVICE_TABLE(acpi, dwc3_acpi_match); static struct platform_driver dwc3_driver = { .probe = dwc3_probe, - .remove = dwc3_remove, + .remove_new = dwc3_remove, .driver = { .name = "dwc3", .of_match_table = of_match_ptr(of_dwc3_match), diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 80cc532ba9d5..f5e6ae6e394e 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -84,6 +84,8 @@ #define DWC3_OTG_REGS_START 0xcc00 #define DWC3_OTG_REGS_END 0xccff +#define DWC3_RTK_RTD_GLOBALS_REGS_START 0x8100 + /* Global Registers */ #define DWC3_GSBUSCFG0 0xc100 #define DWC3_GSBUSCFG1 0xc104 @@ -260,6 +262,7 @@ #define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_PARKMODE_DISABLE_HS BIT(16) #define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10) /* Global Status Register */ @@ -277,6 +280,7 @@ /* Global USB2 PHY Configuration Register */ #define DWC3_GUSB2PHYCFG_PHYSOFTRST BIT(31) #define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS BIT(30) +#define DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV BIT(17) #define DWC3_GUSB2PHYCFG_SUSPHY BIT(6) #define DWC3_GUSB2PHYCFG_ULPI_UTMI BIT(4) #define DWC3_GUSB2PHYCFG_ENBLSLPM BIT(8) @@ -523,6 +527,7 @@ #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c #define DWC3_DGCMD_SET_ENDPOINT_PRIME 0x0d #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 +#define DWC3_DGCMD_DEV_NOTIFICATION 0x07 #define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) #define DWC3_DGCMD_CMDACT BIT(10) @@ -535,6 +540,8 @@ #define DWC3_DGCMDPAR_TX_FIFO BIT(5) #define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0) #define DWC3_DGCMDPAR_LOOPBACK_ENA BIT(0) +#define DWC3_DGCMDPAR_DN_FUNC_WAKE BIT(0) +#define DWC3_DGCMDPAR_INTF_SEL(n) ((n) << 4) /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 @@ -966,12 +973,10 @@ struct dwc3_scratchpad_array { * @drd_work: workqueue used for role swapping * @ep0_trb: trb which is used for the ctrl_req * @bounce: address of bounce buffer - * @scratchbuf: address of scratch buffer * @setup_buf: used while precessing STD USB requests * @ep0_trb_addr: dma address of @ep0_trb * @bounce_addr: dma address of @bounce * @ep0_usb_req: dummy req used while handling STD USB requests - * @scratch_addr: dma address of scratchbuf * @ep0_in_setup: one control transfer is completed and enter setup phase * @lock: for synchronizing * @mutex: for mode switching @@ -986,6 +991,8 @@ struct dwc3_scratchpad_array { * @bus_clk: clock for accessing the registers * @ref_clk: reference clock * @susp_clk: clock used when the SS phy is in low power (S3) state + * @utmi_clk: clock used for USB2 PHY communication + * @pipe_clk: clock used for USB3 PHY communication * @reset: reset control * @regs: base address for our registers * @regs_size: address space size @@ -996,7 +1003,6 @@ struct dwc3_scratchpad_array { * @current_otg_role: current role of operation while using the OTG block * @desired_otg_role: desired role of operation while using the OTG block * @otg_restart_host: flag that OTG controller needs to restart host - * @nr_scratch: number of scratch buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) * @max_ssp_rate: SuperSpeed Plus maximum signaling rate and lane count @@ -1053,7 +1059,6 @@ struct dwc3_scratchpad_array { * @delayed_status: true when gadget driver asks for delayed status * @ep0_bounced: true when we used bounce buffer * @ep0_expect_in: true when we expect a DATA IN transfer - * @has_hibernation: true when dwc3 was configured with Hibernation * @sysdev_is_parent: true when dwc3 device has a parent driver * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that * there's now way for software to detect this in runtime. @@ -1095,10 +1100,14 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. - * @resume-hs-terminations: Set if we enable quirk for fixing improper crc + * @resume_hs_terminations: Set if we enable quirk for fixing improper crc * generation after resume from suspend. + * @ulpi_ext_vbus_drv: Set to confiure the upli chip to drives CPEN pin + * VBUS with an external supply. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. + * @parkmode_disable_hs_quirk: set if we need to disable all HishSpeed + * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis @@ -1107,6 +1116,7 @@ struct dwc3_scratchpad_array { * 3 - Reserved * @dis_metastability_quirk: set to disable metastability quirk. * @dis_split_quirk: set to disable split boundary. + * @wakeup_configured: set if the device is configured for remote wakeup. * @suspended: set to track suspend event due to U3/L2. * @imod_interval: set the interrupt moderation interval in 250ns * increments or 0 to disable. @@ -1121,11 +1131,9 @@ struct dwc3 { struct work_struct drd_work; struct dwc3_trb *ep0_trb; void *bounce; - void *scratchbuf; u8 *setup_buf; dma_addr_t ep0_trb_addr; dma_addr_t bounce_addr; - dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; struct completion ep0_in_setup; @@ -1150,6 +1158,8 @@ struct dwc3 { struct clk *bus_clk; struct clk *ref_clk; struct clk *susp_clk; + struct clk *utmi_clk; + struct clk *pipe_clk; struct reset_control *reset; @@ -1185,7 +1195,6 @@ struct dwc3 { u32 current_otg_role; u32 desired_otg_role; bool otg_restart_host; - u32 nr_scratch; u32 u1u2; u32 maximum_speed; u32 gadget_max_speed; @@ -1282,7 +1291,6 @@ struct dwc3 { unsigned delayed_status:1; unsigned ep0_bounced:1; unsigned ep0_expect_in:1; - unsigned has_hibernation:1; unsigned sysdev_is_parent:1; unsigned has_lpm_erratum:1; unsigned is_utmi_l1_suspend:1; @@ -1315,7 +1323,9 @@ struct dwc3 { unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; unsigned resume_hs_terminations:1; + unsigned ulpi_ext_vbus_drv:1; unsigned parkmode_disable_ss_quirk:1; + unsigned parkmode_disable_hs_quirk:1; unsigned gfladj_refclk_lpm_sel:1; unsigned tx_de_emphasis_quirk:1; @@ -1325,6 +1335,7 @@ struct dwc3 { unsigned dis_split_quirk:1; unsigned async_callbacks:1; + unsigned wakeup_configured:1; unsigned suspended:1; u16 imod_interval; |