summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c2
-rw-r--r--drivers/usb/core/hub.c6
-rw-r--r--drivers/usb/core/inode.c1
-rw-r--r--drivers/usb/gadget/Kconfig5
-rw-r--r--drivers/usb/gadget/amd5536udc.c1
-rw-r--r--drivers/usb/gadget/at91_udc.c1
-rw-r--r--drivers/usb/gadget/dummy_hcd.c1
-rw-r--r--drivers/usb/gadget/inode.c4
-rw-r--r--drivers/usb/gadget/mv_udc_core.c8
-rw-r--r--drivers/usb/gadget/net2280.c1
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c5
-rw-r--r--drivers/usb/gadget/s3c-hsotg.c22
-rw-r--r--drivers/usb/gadget/s3c-hsudc.c7
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c1
-rw-r--r--drivers/usb/host/ohci-pxa27x.c7
-rw-r--r--drivers/usb/host/xhci-dbg.c8
-rw-r--r--drivers/usb/host/xhci-mem.c14
-rw-r--r--drivers/usb/host/xhci-pci.c14
-rw-r--r--drivers/usb/host/xhci-ring.c2
-rw-r--r--drivers/usb/host/xhci.c18
-rw-r--r--drivers/usb/host/xhci.h6
-rw-r--r--drivers/usb/musb/musb_core.c1
-rw-r--r--drivers/usb/renesas_usbhs/mod_gadget.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h1
-rw-r--r--drivers/usb/serial/option.c34
-rw-r--r--drivers/usb/storage/transport.c29
-rw-r--r--drivers/usb/storage/unusual_devs.h19
-rw-r--r--drivers/usb/storage/usb.c13
-rw-r--r--drivers/usb/storage/usb.h2
30 files changed, 186 insertions, 49 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 395a347f2ebb..dac7676ce21b 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1530,6 +1530,8 @@ static const struct usb_device_id acm_ids[] = {
{ NOKIA_PCSUITE_ACM_INFO(0x04ce), }, /* Nokia E90 */
{ NOKIA_PCSUITE_ACM_INFO(0x01d4), }, /* Nokia E55 */
{ NOKIA_PCSUITE_ACM_INFO(0x0302), }, /* Nokia N8 */
+ { NOKIA_PCSUITE_ACM_INFO(0x0335), }, /* Nokia E7 */
+ { NOKIA_PCSUITE_ACM_INFO(0x03cd), }, /* Nokia C7 */
{ SAMSUNG_PCSUITE_ACM_INFO(0x6651), }, /* Samsung GTi8510 (INNOV8) */
/* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 79a58c3a2e2a..90ae1753dda1 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev,
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0,
data, sizeof(*data), USB_STS_TIMEOUT);
@@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1,
{
int i, status = -ETIMEDOUT;
- for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) {
+ for (i = 0; i < USB_STS_RETRIES &&
+ (status == -ETIMEDOUT || status == -EPIPE); i++) {
status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1,
data, sizeof(*data), USB_STS_TIMEOUT);
diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c
index 1b125c224dcf..2278dad886e2 100644
--- a/drivers/usb/core/inode.c
+++ b/drivers/usb/core/inode.c
@@ -389,7 +389,6 @@ static int usbfs_rmdir(struct inode *dir, struct dentry *dentry)
mutex_unlock(&inode->i_mutex);
if (!error)
d_delete(dentry);
- dput(dentry);
return error;
}
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 58456d1aec21..029e288805b6 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -632,13 +632,10 @@ config USB_DUMMY_HCD
endchoice
+# Selected by UDC drivers that support high-speed operation.
config USB_GADGET_DUALSPEED
bool
depends on USB_GADGET
- default n
- help
- Means that gadget drivers should include extra descriptors
- and code to handle dual-speed controllers.
#
# USB Gadget Drivers
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 6e42aab75806..95e8138cd48f 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -60,6 +60,7 @@
#include <linux/device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/system.h>
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 41dc093c0a1b..f4690ffcb489 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -38,6 +38,7 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <mach/hardware.h>
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 61ff927928ab..d3dcabc1a5fc 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -1906,6 +1906,7 @@ static int dummy_hcd_probe(struct platform_device *pdev)
if (!hcd)
return -ENOMEM;
the_controller = hcd_to_dummy (hcd);
+ hcd->has_tt = 1;
retval = usb_add_hcd(hcd, 0, 0);
if (retval != 0) {
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index a01383f71f38..a56876aaf76c 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -431,8 +431,10 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
/* halt any endpoint by doing a "wrong direction" i/o call */
if (!usb_endpoint_dir_in(&data->desc)) {
- if (usb_endpoint_xfer_isoc(&data->desc))
+ if (usb_endpoint_xfer_isoc(&data->desc)) {
+ mutex_unlock(&data->lock);
return -EINVAL;
+ }
DBG (data->dev, "%s halt\n", data->name);
spin_lock_irq (&data->dev->lock);
if (likely (data->ep != NULL))
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index b62b2640deb0..b1a8146b9d50 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -2083,7 +2083,7 @@ out:
}
#ifdef CONFIG_PM
-static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
+static int mv_udc_suspend(struct device *_dev)
{
struct mv_udc *udc = the_controller;
@@ -2092,7 +2092,7 @@ static int mv_udc_suspend(struct platform_device *_dev, pm_message_t state)
return 0;
}
-static int mv_udc_resume(struct platform_device *_dev)
+static int mv_udc_resume(struct device *_dev)
{
struct mv_udc *udc = the_controller;
int retval;
@@ -2100,7 +2100,7 @@ static int mv_udc_resume(struct platform_device *_dev)
retval = mv_udc_phy_init(udc->phy_regs);
if (retval) {
dev_err(_dev, "phy initialization error %d\n", retval);
- goto error;
+ return retval;
}
udc_reset(udc);
ep0_reset(udc);
@@ -2122,7 +2122,7 @@ static struct platform_driver udc_driver = {
.owner = THIS_MODULE,
.name = "pxa-u2o",
#ifdef CONFIG_PM
- .pm = mv_udc_pm_ops,
+ .pm = &mv_udc_pm_ops,
#endif
},
};
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 24696f7fa6a9..476d88e1ae97 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -63,6 +63,7 @@
#include <linux/device.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <asm/byteorder.h>
#include <asm/io.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 365c02fc25fc..774545494cf2 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -2216,7 +2216,6 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_DISC_IRQ, retval);
-lubbock_fail0:
goto err_irq_lub;
}
retval = request_irq(LUBBOCK_USB_IRQ,
@@ -2226,7 +2225,6 @@ lubbock_fail0:
if (retval != 0) {
pr_err("%s: can't get irq %i, err %d\n",
driver_name, LUBBOCK_USB_IRQ, retval);
- free_irq(LUBBOCK_USB_DISC_IRQ, dev);
goto lubbock_fail0;
}
} else
@@ -2236,10 +2234,11 @@ lubbock_fail0:
return 0;
#ifdef CONFIG_ARCH_LUBBOCK
+lubbock_fail0:
free_irq(LUBBOCK_USB_DISC_IRQ, dev);
err_irq_lub:
-#endif
free_irq(irq, dev);
+#endif
err_irq1:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index acb9cc418df9..0dfee282878a 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2680,9 +2680,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
writel(0, hsotg->regs + S3C_DAINTMSK);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* enable in and out endpoint interrupts */
s3c_hsotg_en_gsint(hsotg, S3C_GINTSTS_OEPInt | S3C_GINTSTS_IEPInt);
@@ -2701,7 +2701,7 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
udelay(10); /* see openiboot */
__bic32(hsotg->regs + S3C_DCTL, S3C_DCTL_PWROnPrgDone);
- dev_info(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
+ dev_dbg(hsotg->dev, "DCTL=0x%08x\n", readl(hsotg->regs + S3C_DCTL));
/* S3C_DxEPCTL_USBActEp says RO in manual, but seems to be set by
writing to the EPCTL register.. */
@@ -2721,9 +2721,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
s3c_hsotg_enqueue_setup(hsotg);
- dev_info(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
- readl(hsotg->regs + S3C_DIEPCTL0),
- readl(hsotg->regs + S3C_DOEPCTL0));
+ dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+ readl(hsotg->regs + S3C_DIEPCTL0),
+ readl(hsotg->regs + S3C_DOEPCTL0));
/* clear global NAKs */
writel(S3C_DCTL_CGOUTNak | S3C_DCTL_CGNPInNAK,
@@ -2921,9 +2921,9 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
/* setup fifos */
- dev_info(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
- readl(hsotg->regs + S3C_GRXFSIZ),
- readl(hsotg->regs + S3C_GNPTXFSIZ));
+ dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
+ readl(hsotg->regs + S3C_GRXFSIZ),
+ readl(hsotg->regs + S3C_GNPTXFSIZ));
s3c_hsotg_init_fifo(hsotg);
@@ -2945,6 +2945,7 @@ static void s3c_hsotg_init(struct s3c_hsotg *hsotg)
static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
{
+#ifdef DEBUG
struct device *dev = hsotg->dev;
void __iomem *regs = hsotg->regs;
u32 val;
@@ -2987,6 +2988,7 @@ static void s3c_hsotg_dump(struct s3c_hsotg *hsotg)
dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
readl(regs + S3C_DVBUSDIS), readl(regs + S3C_DVBUSPULSE));
+#endif
}
diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c
index cfe3cf56d6bd..d5e3e1e58626 100644
--- a/drivers/usb/gadget/s3c-hsudc.c
+++ b/drivers/usb/gadget/s3c-hsudc.c
@@ -26,6 +26,7 @@
#include <linux/clk.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
+#include <linux/prefetch.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/udc.h>
@@ -1301,7 +1302,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
hsudc->uclk = clk_get(&pdev->dev, "usb-device");
if (IS_ERR(hsudc->uclk)) {
dev_err(dev, "failed to find usb-device clock source\n");
- return PTR_ERR(hsudc->uclk);
+ ret = PTR_ERR(hsudc->uclk);
+ goto err_clk;
}
clk_enable(hsudc->uclk);
@@ -1310,7 +1312,8 @@ static int s3c_hsudc_probe(struct platform_device *pdev)
disable_irq(hsudc->irq);
local_irq_enable();
return 0;
-
+err_clk:
+ free_irq(hsudc->irq, hsudc);
err_irq:
iounmap(hsudc->regs);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 6d8b04061d5d..100f2635cf0a 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -36,6 +36,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/prefetch.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index afef7b0a4195..80be5472783a 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -312,8 +312,10 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
return PTR_ERR(usb_clk);
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
- if (!hcd)
- return -ENOMEM;
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto err0;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
@@ -368,6 +370,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
err1:
usb_put_hcd(hcd);
+ err0:
clk_put(usb_clk);
return retval;
}
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2e0486178dbe..1f50b4468e87 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -438,13 +438,13 @@ char *xhci_get_slot_state(struct xhci_hcd *xhci,
struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
switch (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state))) {
- case 0:
+ case SLOT_STATE_ENABLED:
return "enabled/disabled";
- case 1:
+ case SLOT_STATE_DEFAULT:
return "default";
- case 2:
+ case SLOT_STATE_ADDRESSED:
return "addressed";
- case 3:
+ case SLOT_STATE_CONFIGURED:
return "configured";
default:
return "reserved";
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 26caba4c1950..0f8e1d29a858 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -985,9 +985,19 @@ static unsigned int xhci_parse_exponent_interval(struct usb_device *udev,
interval = clamp_val(ep->desc.bInterval, 1, 16) - 1;
if (interval != ep->desc.bInterval - 1)
dev_warn(&udev->dev,
- "ep %#x - rounding interval to %d microframes\n",
+ "ep %#x - rounding interval to %d %sframes\n",
ep->desc.bEndpointAddress,
- 1 << interval);
+ 1 << interval,
+ udev->speed == USB_SPEED_FULL ? "" : "micro");
+
+ if (udev->speed == USB_SPEED_FULL) {
+ /*
+ * Full speed isoc endpoints specify interval in frames,
+ * not microframes. We are using microframes everywhere,
+ * so adjust accordingly.
+ */
+ interval += 3; /* 1 frame = 2^3 uframes */
+ }
return interval;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index c408e9f6a707..17541d09eabb 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -106,12 +106,22 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
/* Look for vendor-specific quirks */
if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
- pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
- pdev->revision == 0x0) {
+ pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
+ if (pdev->revision == 0x0) {
xhci->quirks |= XHCI_RESET_EP_QUIRK;
xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
" endpoint cmd after reset endpoint\n");
+ }
+ /* Fresco Logic confirms: all revisions of this chip do not
+ * support MSI, even though some of them claim to in their PCI
+ * capabilities.
+ */
+ xhci->quirks |= XHCI_BROKEN_MSI;
+ xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
+ "has broken MSI implementation\n",
+ pdev->revision);
}
+
if (pdev->vendor == PCI_VENDOR_ID_NEC)
xhci->quirks |= XHCI_NEC_HOST;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cc1485bfed38..800f417c7309 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1782,7 +1782,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
struct usb_iso_packet_descriptor *frame;
int idx;
- ep_ring = xhci_dma_to_transfer_ring(ep, event->buffer);
+ ep_ring = xhci_dma_to_transfer_ring(ep, le64_to_cpu(event->buffer));
urb_priv = td->urb->hcpriv;
idx = urb_priv->td_cnt;
frame = &td->urb->iso_frame_desc[idx];
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index d9660eb97eb9..06e7023258d0 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -430,12 +430,19 @@ int xhci_run(struct usb_hcd *hcd)
free_irq(hcd->irq, hcd);
hcd->irq = -1;
+ /* Some Fresco Logic host controllers advertise MSI, but fail to
+ * generate interrupts. Don't even try to enable MSI.
+ */
+ if (xhci->quirks & XHCI_BROKEN_MSI)
+ goto legacy_irq;
+
ret = xhci_setup_msix(xhci);
if (ret)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (ret) {
+legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);
@@ -1849,8 +1856,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
/* Free any rings that were dropped, but not changed. */
for (i = 1; i < 31; ++i) {
- if ((ctrl_ctx->drop_flags & (1 << (i + 1))) &&
- !(ctrl_ctx->add_flags & (1 << (i + 1))))
+ if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) &&
+ !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1))))
xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i);
}
xhci_zero_in_ctx(xhci, virt_dev);
@@ -2467,6 +2474,7 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_command *reset_device_cmd;
int timeleft;
int last_freed_endpoint;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, false, __func__);
if (ret <= 0)
@@ -2499,6 +2507,12 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev)
return -EINVAL;
}
+ /* If device is not setup, there is no point in resetting it */
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ if (GET_SLOT_STATE(le32_to_cpu(slot_ctx->dev_state)) ==
+ SLOT_STATE_DISABLED)
+ return 0;
+
xhci_dbg(xhci, "Resetting device with slot ID %u\n", slot_id);
/* Allocate the command structure that holds the struct completion.
* Assume we're in process context, since the normal device reset
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ac0196e7fcf1..7d1ea3bf5e1f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -560,6 +560,11 @@ struct xhci_slot_ctx {
#define SLOT_STATE (0x1f << 27)
#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
+#define SLOT_STATE_DISABLED 0
+#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
+#define SLOT_STATE_DEFAULT 1
+#define SLOT_STATE_ADDRESSED 2
+#define SLOT_STATE_CONFIGURED 3
/**
* struct xhci_ep_ctx
@@ -1302,6 +1307,7 @@ struct xhci_hcd {
* commands.
*/
#define XHCI_EP_LIMIT_QUIRK (1 << 5)
+#define XHCI_BROKEN_MSI (1 << 6)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index ab8e1001e5e2..c71b0372786e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -96,6 +96,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/kobject.h>
+#include <linux/prefetch.h>
#include <linux/platform_device.h>
#include <linux/io.h>
diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c
index 206cfabc9286..547486ccd059 100644
--- a/drivers/usb/renesas_usbhs/mod_gadget.c
+++ b/drivers/usb/renesas_usbhs/mod_gadget.c
@@ -1380,5 +1380,6 @@ void __devexit usbhs_mod_gadget_remove(struct usbhs_priv *priv)
{
struct usbhsg_gpriv *gpriv = usbhsg_priv_to_gpriv(priv);
+ kfree(gpriv->uep);
kfree(gpriv);
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index e8dbde55f6c5..162728977553 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -647,6 +647,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_3_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_1_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_2_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index 1d946cd238ba..ab1fcdf3c378 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -351,6 +351,7 @@
*/
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
+#define FTDI_4N_GALAXY_DE_3_PID 0xF3C2
/*
* Linx Technologies product ids
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 318dd00040a3..60b25d8ea0e2 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -311,10 +311,6 @@ static void option_instat_callback(struct urb *urb);
#define ZTE_PRODUCT_AC2726 0xfff5
#define ZTE_PRODUCT_AC8710T 0xffff
-/* ZTE PRODUCTS -- alternate vendor ID */
-#define ZTE_VENDOR_ID2 0x1d6b
-#define ZTE_PRODUCT_MF_330 0x0002
-
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -340,11 +336,12 @@ static void option_instat_callback(struct urb *urb);
#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_PH300 0x9100
#define ALINK_PRODUCT_3GU 0x9200
/* ALCATEL PRODUCTS */
#define ALCATEL_VENDOR_ID 0x1bbb
-#define ALCATEL_PRODUCT_X060S 0x0000
+#define ALCATEL_PRODUCT_X060S_X200 0x0000
#define PIRELLI_VENDOR_ID 0x1266
#define PIRELLI_PRODUCT_C100_1 0x1002
@@ -379,6 +376,9 @@ static void option_instat_callback(struct urb *urb);
* It seems to contain a Qualcomm QSC6240/6290 chipset */
#define FOUR_G_SYSTEMS_PRODUCT_W14 0x9603
+/* Zoom */
+#define ZOOM_PRODUCT_4597 0x9607
+
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
#define HAIER_PRODUCT_CE100 0x2009
@@ -432,6 +432,20 @@ static const struct option_blacklist_info four_g_w14_blacklist = {
.reason = OPTION_BLACKLIST_SENDSETUP
};
+static const u8 alcatel_x200_no_sendsetup[] = { 0, 1 };
+static const struct option_blacklist_info alcatel_x200_blacklist = {
+ .infolen = ARRAY_SIZE(alcatel_x200_no_sendsetup),
+ .ifaceinfo = alcatel_x200_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
+static const u8 zte_k3765_z_no_sendsetup[] = { 0, 1, 2 };
+static const struct option_blacklist_info zte_k3765_z_blacklist = {
+ .infolen = ARRAY_SIZE(zte_k3765_z_no_sendsetup),
+ .ifaceinfo = zte_k3765_z_no_sendsetup,
+ .reason = OPTION_BLACKLIST_SENDSETUP
+};
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -916,13 +930,13 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff) },
- { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
+ 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ZTE_VENDOR_ID2, ZTE_PRODUCT_MF_330) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
@@ -935,13 +949,17 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
- { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
+ .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
+ },
{ USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
{ USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14),
.driver_info = (kernel_ulong_t)&four_g_w14_blacklist
},
+ { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
/* Pirelli */
{ USB_DEVICE(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1)},
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 00418995d8e9..e8ae21b2d387 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -819,6 +819,35 @@ Retry_Sense:
}
}
+ /*
+ * Some devices don't work or return incorrect data the first
+ * time they get a READ(10) command, or for the first READ(10)
+ * after a media change. If the INITIAL_READ10 flag is set,
+ * keep track of whether READ(10) commands succeed. If the
+ * previous one succeeded and this one failed, set the REDO_READ10
+ * flag to force a retry.
+ */
+ if (unlikely((us->fflags & US_FL_INITIAL_READ10) &&
+ srb->cmnd[0] == READ_10)) {
+ if (srb->result == SAM_STAT_GOOD) {
+ set_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ } else if (test_bit(US_FLIDX_READ10_WORKED, &us->dflags)) {
+ clear_bit(US_FLIDX_READ10_WORKED, &us->dflags);
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ }
+
+ /*
+ * Next, if the REDO_READ10 flag is set, return a result
+ * code that will cause the SCSI core to retry the READ(10)
+ * command immediately.
+ */
+ if (test_bit(US_FLIDX_REDO_READ10, &us->dflags)) {
+ clear_bit(US_FLIDX_REDO_READ10, &us->dflags);
+ srb->result = DID_IMM_RETRY << 16;
+ srb->sense_buffer[0] = 0;
+ }
+ }
+
/* Did we transfer less than the minimum amount required? */
if ((srb->result == SAM_STAT_GOOD || srb->sense_buffer[2] == 0) &&
scsi_bufflen(srb) - scsi_get_resid(srb) < srb->underflow)
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index c1602b8c5594..ccff3483eebc 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1114,6 +1114,16 @@ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
+/* Reported by Paul Hartman <paul.hartman+linux@gmail.com>
+ * This card reader returns "Illegal Request, Logical Block Address
+ * Out of Range" for the first READ(10) after a new card is inserted.
+ */
+UNUSUAL_DEV( 0x090c, 0x6000, 0x0100, 0x0100,
+ "Feiya",
+ "SD/SDHC Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* This Pentax still camera is not conformant
* to the USB storage specification: -
* - It does not like the INQUIRY command. So we must handle this command
@@ -1888,6 +1898,15 @@ UNUSUAL_DEV( 0x1908, 0x3335, 0x0200, 0x0200,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_READ_DISC_INFO ),
+/* Reported by Sven Geggus <sven-usbst@geggus.net>
+ * This encrypted pen drive returns bogus data for the initial READ(10).
+ */
+UNUSUAL_DEV( 0x1b1c, 0x1ab5, 0x0200, 0x0200,
+ "Corsair",
+ "Padlock v2",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_INITIAL_READ10 ),
+
/* Patch by Richard Schütz <r.schtz@t-online.de>
* This external hard drive enclosure uses a JMicron chip which
* needs the US_FL_IGNORE_RESIDUE flag to work properly. */
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 5ee7ac42e08f..0ca095820f3e 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -440,7 +440,8 @@ static void adjust_quirks(struct us_data *us)
US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 |
US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE |
US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT |
- US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16);
+ US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 |
+ US_FL_INITIAL_READ10);
p = quirks;
while (*p) {
@@ -490,6 +491,9 @@ static void adjust_quirks(struct us_data *us)
case 'm':
f |= US_FL_MAX_SECTORS_64;
break;
+ case 'n':
+ f |= US_FL_INITIAL_READ10;
+ break;
case 'o':
f |= US_FL_CAPACITY_OK;
break;
@@ -953,6 +957,13 @@ int usb_stor_probe2(struct us_data *us)
if (result)
goto BadDevice;
+ /*
+ * If the device returns invalid data for the first READ(10)
+ * command, indicate the command should be retried.
+ */
+ if (us->fflags & US_FL_INITIAL_READ10)
+ set_bit(US_FLIDX_REDO_READ10, &us->dflags);
+
/* Acquire all the other resources and add the host */
result = usb_stor_acquire_resources(us);
if (result)
diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h
index 89d3bfff98df..7b0f2113632e 100644
--- a/drivers/usb/storage/usb.h
+++ b/drivers/usb/storage/usb.h
@@ -73,6 +73,8 @@ struct us_unusual_dev {
#define US_FLIDX_RESETTING 4 /* device reset in progress */
#define US_FLIDX_TIMED_OUT 5 /* SCSI midlayer timed out */
#define US_FLIDX_DONT_SCAN 6 /* don't scan (disconnect) */
+#define US_FLIDX_REDO_READ10 7 /* redo READ(10) command */
+#define US_FLIDX_READ10_WORKED 8 /* previous READ(10) succeeded */
#define USB_STOR_STRING_LEN 32