diff options
Diffstat (limited to 'drivers/usb')
113 files changed, 1682 insertions, 1177 deletions
diff --git a/drivers/usb/atm/usbatm.c b/drivers/usb/atm/usbatm.c index 362217189ef3..1cdb8758ae01 100644 --- a/drivers/usb/atm/usbatm.c +++ b/drivers/usb/atm/usbatm.c @@ -1026,7 +1026,7 @@ int usbatm_usb_probe(struct usb_interface *intf, const struct usb_device_id *id, /* public fields */ instance->driver = driver; - strlcpy(instance->driver_name, driver->driver_name, + strscpy(instance->driver_name, driver->driver_name, sizeof(instance->driver_name)); instance->usb_dev = usb_dev; diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 661818e8fed6..c815824a0b2d 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -34,26 +34,26 @@ config USB_CHIPIDEA_HOST ChipIdea driver. config USB_CHIPIDEA_PCI - tristate "Enable PCI glue driver" if EMBEDDED + tristate "Enable PCI glue driver" if EXPERT depends on USB_PCI depends on NOP_USB_XCEIV default USB_CHIPIDEA config USB_CHIPIDEA_MSM - tristate "Enable MSM hsusb glue driver" if EMBEDDED + tristate "Enable MSM hsusb glue driver" if EXPERT default USB_CHIPIDEA config USB_CHIPIDEA_IMX - tristate "Enable i.MX USB glue driver" if EMBEDDED + tristate "Enable i.MX USB glue driver" if EXPERT depends on OF default USB_CHIPIDEA config USB_CHIPIDEA_GENERIC - tristate "Enable generic USB2 glue driver" if EMBEDDED + tristate "Enable generic USB2 glue driver" if EXPERT default USB_CHIPIDEA config USB_CHIPIDEA_TEGRA - tristate "Enable Tegra USB glue driver" if EMBEDDED + tristate "Enable Tegra USB glue driver" if EXPERT depends on OF default USB_CHIPIDEA diff --git a/drivers/usb/chipidea/ci_hdrc_usb2.c b/drivers/usb/chipidea/ci_hdrc_usb2.c index 89e1d82d739b..dc86b12060b5 100644 --- a/drivers/usb/chipidea/ci_hdrc_usb2.c +++ b/drivers/usb/chipidea/ci_hdrc_usb2.c @@ -30,6 +30,7 @@ static const struct ci_hdrc_platform_data ci_default_pdata = { static const struct ci_hdrc_platform_data ci_zynq_pdata = { .capoffset = DEF_CAPOFFSET, + .flags = CI_HDRC_PHY_VBUS_CONTROL, }; static const struct ci_hdrc_platform_data ci_zevio_pdata = { diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index bdc3885c0d49..bc3634a54c6b 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -63,6 +63,13 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) priv->enabled = enable; } + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) { + if (enable) + usb_phy_vbus_on(ci->usb_phy); + else + usb_phy_vbus_off(ci->usb_phy); + } + if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) { /* * Marvell 28nm HSIC PHY requires forcing the port to HS mode. diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 61b157b9c662..ada78daba6df 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -471,6 +471,10 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on) return; } } + + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) + usb_phy_vbus_on(ci->usb_phy); + /* Disable data pulse irq */ hw_write_otgsc(ci, OTGSC_DPIE, 0); @@ -480,6 +484,9 @@ static void ci_otg_drv_vbus(struct otg_fsm *fsm, int on) if (ci->platdata->reg_vbus) regulator_disable(ci->platdata->reg_vbus); + if (ci->platdata->flags & CI_HDRC_PHY_VBUS_CONTROL) + usb_phy_vbus_off(ci->usb_phy); + fsm->a_bus_drop = 1; fsm->a_bus_req = 0; } diff --git a/drivers/usb/common/debug.c b/drivers/usb/common/debug.c index 075f6b1b2a1a..f204cec8d380 100644 --- a/drivers/usb/common/debug.c +++ b/drivers/usb/common/debug.c @@ -208,30 +208,28 @@ static void usb_decode_set_isoch_delay(__u8 wValue, char *str, size_t size) snprintf(str, size, "Set Isochronous Delay(Delay = %d ns)", wValue); } -/** - * usb_decode_ctrl - Returns human readable representation of control request. - * @str: buffer to return a human-readable representation of control request. - * This buffer should have about 200 bytes. - * @size: size of str buffer. - * @bRequestType: matches the USB bmRequestType field - * @bRequest: matches the USB bRequest field - * @wValue: matches the USB wValue field (CPU byte order) - * @wIndex: matches the USB wIndex field (CPU byte order) - * @wLength: matches the USB wLength field (CPU byte order) - * - * Function returns decoded, formatted and human-readable description of - * control request packet. - * - * The usage scenario for this is for tracepoints, so function as a return - * use the same value as in parameters. This approach allows to use this - * function in TP_printk - * - * Important: wValue, wIndex, wLength parameters before invoking this function - * should be processed by le16_to_cpu macro. - */ -const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, - __u8 bRequest, __u16 wValue, __u16 wIndex, - __u16 wLength) +static void usb_decode_ctrl_generic(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + u8 recip = bRequestType & USB_RECIP_MASK; + u8 type = bRequestType & USB_TYPE_MASK; + + snprintf(str, size, + "Type=%s Recipient=%s Dir=%s bRequest=%u wValue=%u wIndex=%u wLength=%u", + (type == USB_TYPE_STANDARD) ? "Standard" : + (type == USB_TYPE_VENDOR) ? "Vendor" : + (type == USB_TYPE_CLASS) ? "Class" : "Unknown", + (recip == USB_RECIP_DEVICE) ? "Device" : + (recip == USB_RECIP_INTERFACE) ? "Interface" : + (recip == USB_RECIP_ENDPOINT) ? "Endpoint" : "Unknown", + (bRequestType & USB_DIR_IN) ? "IN" : "OUT", + bRequest, wValue, wIndex, wLength); +} + +static void usb_decode_ctrl_standard(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) { switch (bRequest) { case USB_REQ_GET_STATUS: @@ -272,14 +270,48 @@ const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, usb_decode_set_isoch_delay(wValue, str, size); break; default: - snprintf(str, size, "%02x %02x %02x %02x %02x %02x %02x %02x", - bRequestType, bRequest, - (u8)(cpu_to_le16(wValue) & 0xff), - (u8)(cpu_to_le16(wValue) >> 8), - (u8)(cpu_to_le16(wIndex) & 0xff), - (u8)(cpu_to_le16(wIndex) >> 8), - (u8)(cpu_to_le16(wLength) & 0xff), - (u8)(cpu_to_le16(wLength) >> 8)); + usb_decode_ctrl_generic(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; + } +} + +/** + * usb_decode_ctrl - Returns human readable representation of control request. + * @str: buffer to return a human-readable representation of control request. + * This buffer should have about 200 bytes. + * @size: size of str buffer. + * @bRequestType: matches the USB bmRequestType field + * @bRequest: matches the USB bRequest field + * @wValue: matches the USB wValue field (CPU byte order) + * @wIndex: matches the USB wIndex field (CPU byte order) + * @wLength: matches the USB wLength field (CPU byte order) + * + * Function returns decoded, formatted and human-readable description of + * control request packet. + * + * The usage scenario for this is for tracepoints, so function as a return + * use the same value as in parameters. This approach allows to use this + * function in TP_printk + * + * Important: wValue, wIndex, wLength parameters before invoking this function + * should be processed by le16_to_cpu macro. + */ +const char *usb_decode_ctrl(char *str, size_t size, __u8 bRequestType, + __u8 bRequest, __u16 wValue, __u16 wIndex, + __u16 wLength) +{ + switch (bRequestType & USB_TYPE_MASK) { + case USB_TYPE_STANDARD: + usb_decode_ctrl_standard(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; + case USB_TYPE_VENDOR: + case USB_TYPE_CLASS: + default: + usb_decode_ctrl_generic(str, size, bRequestType, bRequest, + wValue, wIndex, wLength); + break; } return str; diff --git a/drivers/usb/common/usb-conn-gpio.c b/drivers/usb/common/usb-conn-gpio.c index b39c9f1c375d..e20874caba36 100644 --- a/drivers/usb/common/usb-conn-gpio.c +++ b/drivers/usb/common/usb-conn-gpio.c @@ -208,10 +208,8 @@ static int usb_conn_probe(struct platform_device *pdev) if (PTR_ERR(info->vbus) == -ENODEV) info->vbus = NULL; - if (IS_ERR(info->vbus)) { - ret = PTR_ERR(info->vbus); - return dev_err_probe(dev, ret, "failed to get vbus :%d\n", ret); - } + if (IS_ERR(info->vbus)) + return dev_err_probe(dev, PTR_ERR(info->vbus), "failed to get vbus\n"); info->role_sw = usb_role_switch_get(dev); if (IS_ERR(info->role_sw)) diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index b5b85bf80329..837f3e57f580 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1434,7 +1434,7 @@ static int proc_getdriver(struct usb_dev_state *ps, void __user *arg) if (!intf || !intf->dev.driver) ret = -ENODATA; else { - strlcpy(gd.driver, intf->dev.driver->name, + strscpy(gd.driver, intf->dev.driver->name, sizeof(gd.driver)); ret = (copy_to_user(arg, &gd, sizeof(gd)) ? -EFAULT : 0); } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 482dae72ef1c..9b77f49b3560 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -157,7 +157,6 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, /** * usb_hcd_pci_probe - initialize PCI-based HCDs * @dev: USB Host Controller being probed - * @id: pci hotplug id connecting controller to HCD framework * @driver: USB HC driver handle * * Context: task context, might sleep @@ -170,8 +169,7 @@ static void ehci_wait_for_companions(struct pci_dev *pdev, struct usb_hcd *hcd, * * Return: 0 if successful. */ -int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, - const struct hc_driver *driver) +int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver) { struct usb_hcd *hcd; int retval; @@ -180,9 +178,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id, if (usb_disabled()) return -ENODEV; - if (!id) - return -EINVAL; - if (!driver) return -EINVAL; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 94b305bbd621..faeaace0d197 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1474,7 +1474,7 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb, urb->sg, urb->num_sgs, dir); - if (n <= 0) + if (!n) ret = -EAGAIN; else urb->transfer_flags |= URB_DMA_MAP_SG; @@ -2158,21 +2158,14 @@ static struct urb *request_single_step_set_feature_urb( { struct urb *urb; struct usb_hcd *hcd = bus_to_hcd(udev->bus); - struct usb_host_endpoint *ep; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return NULL; urb->pipe = usb_rcvctrlpipe(udev, 0); - ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out) - [usb_pipeendpoint(urb->pipe)]; - if (!ep) { - usb_free_urb(urb); - return NULL; - } - urb->ep = ep; + urb->ep = &udev->ep0; urb->dev = udev; urb->setup_packet = (void *)dr; urb->transfer_buffer = buf; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f99a65a64588..11b27953ccd0 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -388,6 +388,15 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ + { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7418), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7721), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7c18), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7e19), .driver_info = USB_QUIRK_RESET_RESUME }, + { USB_DEVICE(0x0955, 0x7f21), .driver_info = USB_QUIRK_RESET_RESUME }, + /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index dc4fc72ab1b6..5635e4d7ec88 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -3,36 +3,6 @@ * core.c - DesignWare HS OTG Controller common routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 0683852e47e4..40cf2880d7e5 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -3,36 +3,6 @@ * core.h - DesignWare HS OTG Controller common declarations * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __DWC2_CORE_H__ diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index a5c52b237e72..158ede753854 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -3,36 +3,6 @@ * core_intr.c - DesignWare HS OTG Controller common interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index aaf7b9fc4d34..657f1f659ffa 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3,36 +3,6 @@ * hcd.c - DesignWare HS OTG Controller host-mode routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd.h b/drivers/usb/dwc2/hcd.h index ea02ee63ac6d..b7254d94fdc3 100644 --- a/drivers/usb/dwc2/hcd.h +++ b/drivers/usb/dwc2/hcd.h @@ -3,37 +3,8 @@ * hcd.h - DesignWare HS OTG Controller host-mode declarations * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ + #ifndef __DWC2_HCD_H__ #define __DWC2_HCD_H__ diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index a858b5f9c1d6..6b4d825e97a2 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -3,36 +3,6 @@ * hcd_ddma.c - DesignWare HS OTG Controller descriptor DMA routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index d5f4ec1b73b1..c9740caa5974 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -3,36 +3,6 @@ * hcd_intr.c - DesignWare HS OTG Controller host-mode interrupt handling * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hcd_queue.c b/drivers/usb/dwc2/hcd_queue.c index 24beff610cf2..0a1145592fc7 100644 --- a/drivers/usb/dwc2/hcd_queue.c +++ b/drivers/usb/dwc2/hcd_queue.c @@ -3,36 +3,6 @@ * hcd_queue.c - DesignWare HS OTG Controller host queuing routines * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/hw.h b/drivers/usb/dwc2/hw.h index 6b16fbf98bc6..13abdd5f6752 100644 --- a/drivers/usb/dwc2/hw.h +++ b/drivers/usb/dwc2/hw.h @@ -3,36 +3,6 @@ * hw.h - DesignWare HS OTG Controller hardware definitions * * Copyright 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef __DWC2_HW_H__ diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index fdb8a42fff86..8eab5f38b110 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -1,36 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (C) 2004-2016 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <linux/kernel.h> diff --git a/drivers/usb/dwc2/pci.c b/drivers/usb/dwc2/pci.c index a93559b4ecdb..b7306ed8be4c 100644 --- a/drivers/usb/dwc2/pci.c +++ b/drivers/usb/dwc2/pci.c @@ -3,36 +3,6 @@ * pci.c - DesignWare HS OTG Controller PCI driver * * Copyright (C) 2004-2013 Synopsys, Inc. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index fd0ccf6f3ec5..ec4ace0107f5 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -3,36 +3,6 @@ * platform.c - DesignWare HS OTG Controller platform driver * * Copyright (C) Matthijs Kooijman <matthijs@stdin.nl> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions, and the following disclaimer, - * without modification. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. The names of the above-listed copyright holders may not be used - * to endorse or promote products derived from this software without - * specific prior written permission. - * - * ALTERNATIVELY, this software may be distributed under the terms of the - * GNU General Public License ("GPL") as published by the Free Software - * Foundation; either version 2 of the License, or (at your option) any - * later version. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS - * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, - * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR - * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR - * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, - * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR - * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF - * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING - * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS - * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include <linux/kernel.h> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index d0237b30c9be..c0051e250d61 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -408,6 +408,10 @@ static void dwc3_ref_clk_period(struct dwc3 *dwc) reg |= FIELD_PREP(DWC3_GFLADJ_REFCLK_FLADJ_MASK, fladj) | FIELD_PREP(DWC3_GFLADJ_240MHZDECR, decr >> 1) | FIELD_PREP(DWC3_GFLADJ_240MHZDECR_PLS1, decr & 1); + + if (dwc->gfladj_refclk_lpm_sel) + reg |= DWC3_GFLADJ_REFCLK_LPM_SEL; + dwc3_writel(dwc->regs, DWC3_GFLADJ, reg); } @@ -789,7 +793,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) else reg |= DWC3_GUSB2PHYCFG_ENBLSLPM; - if (dwc->dis_u2_freeclk_exists_quirk) + if (dwc->dis_u2_freeclk_exists_quirk || dwc->gfladj_refclk_lpm_sel) reg &= ~DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS; dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); @@ -1180,6 +1184,21 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); } + /* + * When configured in HOST mode, after issuing U3/L2 exit controller + * fails to send proper CRC checksum in CRC5 feild. Because of this + * behaviour Transaction Error is generated, resulting in reset and + * re-enumeration of usb device attached. All the termsel, xcvrsel, + * opmode becomes 0 during end of resume. Enabling bit 10 of GUCTL1 + * will correct this problem. This option is to support certain + * legacy ULPI PHYs. + */ + if (dwc->resume_hs_terminations) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); + reg |= DWC3_GUCTL1_RESUME_OPMODE_HS_HOST; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); + } + if (!DWC3_VER_IS_PRIOR(DWC3, 250A)) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL1); @@ -1523,8 +1542,12 @@ static void dwc3_get_properties(struct dwc3 *dwc) "snps,dis-del-phy-power-chg-quirk"); dwc->dis_tx_ipgap_linecheck_quirk = device_property_read_bool(dev, "snps,dis-tx-ipgap-linecheck-quirk"); + dwc->resume_hs_terminations = device_property_read_bool(dev, + "snps,resume-hs-terminations"); dwc->parkmode_disable_ss_quirk = device_property_read_bool(dev, "snps,parkmode-disable-ss-quirk"); + dwc->gfladj_refclk_lpm_sel = device_property_read_bool(dev, + "snps,gfladj-refclk-lpm-sel-quirk"); dwc->tx_de_emphasis_quirk = device_property_read_bool(dev, "snps,tx_de_emphasis_quirk"); @@ -1753,8 +1776,10 @@ static int dwc3_probe(struct platform_device *pdev) dwc3_get_properties(dwc); dwc->reset = devm_reset_control_array_get_optional_shared(dev); - if (IS_ERR(dwc->reset)) - return PTR_ERR(dwc->reset); + if (IS_ERR(dwc->reset)) { + ret = PTR_ERR(dwc->reset); + goto put_usb_psy; + } if (dev->of_node) { /* @@ -1764,45 +1789,57 @@ static int dwc3_probe(struct platform_device *pdev) * check for them to retain backwards compatibility. */ dwc->bus_clk = devm_clk_get_optional(dev, "bus_early"); - if (IS_ERR(dwc->bus_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); + if (IS_ERR(dwc->bus_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + goto put_usb_psy; + } if (dwc->bus_clk == NULL) { dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk"); - if (IS_ERR(dwc->bus_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->bus_clk), - "could not get bus clock\n"); + if (IS_ERR(dwc->bus_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->bus_clk), + "could not get bus clock\n"); + goto put_usb_psy; + } } dwc->ref_clk = devm_clk_get_optional(dev, "ref"); - if (IS_ERR(dwc->ref_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); + if (IS_ERR(dwc->ref_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + goto put_usb_psy; + } if (dwc->ref_clk == NULL) { dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk"); - if (IS_ERR(dwc->ref_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->ref_clk), - "could not get ref clock\n"); + if (IS_ERR(dwc->ref_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->ref_clk), + "could not get ref clock\n"); + goto put_usb_psy; + } } dwc->susp_clk = devm_clk_get_optional(dev, "suspend"); - if (IS_ERR(dwc->susp_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); + if (IS_ERR(dwc->susp_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + goto put_usb_psy; + } if (dwc->susp_clk == NULL) { dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk"); - if (IS_ERR(dwc->susp_clk)) - return dev_err_probe(dev, PTR_ERR(dwc->susp_clk), - "could not get suspend clock\n"); + if (IS_ERR(dwc->susp_clk)) { + ret = dev_err_probe(dev, PTR_ERR(dwc->susp_clk), + "could not get suspend clock\n"); + goto put_usb_psy; + } } } ret = reset_control_deassert(dwc->reset); if (ret) - return ret; + goto put_usb_psy; ret = dwc3_clk_enable(dwc); if (ret) @@ -1909,7 +1946,7 @@ disable_clks: dwc3_clk_disable(dwc); assert_reset: reset_control_assert(dwc->reset); - +put_usb_psy: if (dwc->usb_psy) power_supply_put(dwc->usb_psy); @@ -1977,9 +2014,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) case DWC3_GCTL_PRTCAP_DEVICE: if (pm_runtime_suspended(dwc->dev)) break; - spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_suspend(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); synchronize_irq(dwc->irq_gadget); dwc3_core_exit(dwc); break; @@ -2040,9 +2075,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) return ret; dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE); - spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_resume(dwc); - spin_unlock_irqrestore(&dwc->lock, flags); break; case DWC3_GCTL_PRTCAP_HOST: if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(dwc->dev)) { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 4fe4287dc934..8f9959ba9fd4 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -263,6 +263,7 @@ #define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) +#define DWC3_GUCTL1_RESUME_OPMODE_HS_HOST BIT(10) /* Global Status Register */ #define DWC3_GSTS_OTG_IP BIT(10) @@ -391,6 +392,7 @@ #define DWC3_GFLADJ_30MHZ_SDBND_SEL BIT(7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f #define DWC3_GFLADJ_REFCLK_FLADJ_MASK GENMASK(21, 8) +#define DWC3_GFLADJ_REFCLK_LPM_SEL BIT(23) #define DWC3_GFLADJ_240MHZDECR GENMASK(30, 24) #define DWC3_GFLADJ_240MHZDECR_PLS1 BIT(31) @@ -1096,6 +1098,8 @@ struct dwc3_scratchpad_array { * change quirk. * @dis_tx_ipgap_linecheck_quirk: set if we disable u2mac linestate * check during HS transmit. + * @resume-hs-terminations: Set if we enable quirk for fixing improper crc + * generation after resume from suspend. * @parkmode_disable_ss_quirk: set if we need to disable all SuperSpeed * instances in park mode. * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk @@ -1311,7 +1315,9 @@ struct dwc3 { unsigned dis_u2_freeclk_exists_quirk:1; unsigned dis_del_phy_power_chg_quirk:1; unsigned dis_tx_ipgap_linecheck_quirk:1; + unsigned resume_hs_terminations:1; unsigned parkmode_disable_ss_quirk:1; + unsigned gfladj_refclk_lpm_sel:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; @@ -1560,6 +1566,7 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned int cmd, u32 param); void dwc3_gadget_clear_tx_fifos(struct dwc3 *dwc); +void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index d223c54115f4..48b44b88dc25 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -278,7 +278,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size, break; case DWC3_DEPEVT_XFERINPROGRESS: scnprintf(str + len, size - len, - "Transfer In Progress [%d] (%c%c%c)", + "Transfer In Progress [%08x] (%c%c%c)", event->parameters, status & DEPEVT_STATUS_SHORT ? 'S' : 's', status & DEPEVT_STATUS_IOC ? 'I' : 'i', @@ -286,7 +286,7 @@ static inline const char *dwc3_ep_event_string(char *str, size_t size, break; case DWC3_DEPEVT_XFERNOTREADY: len += scnprintf(str + len, size - len, - "Transfer Not Ready [%d]%s", + "Transfer Not Ready [%08x]%s", event->parameters, status & DEPEVT_STATUS_TRANSFER_ACTIVE ? " (Active)" : " (Not Active)"); diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 4ee4ca09873a..fb14511b1e10 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -40,9 +40,10 @@ #define PCI_DEVICE_ID_INTEL_TGPLP 0xa0ee #define PCI_DEVICE_ID_INTEL_TGPH 0x43ee #define PCI_DEVICE_ID_INTEL_JSP 0x4dee -#define PCI_DEVICE_ID_INTEL_ADL 0x465e -#define PCI_DEVICE_ID_INTEL_ADLP 0x51ee -#define PCI_DEVICE_ID_INTEL_ADLM 0x54ee +#define PCI_DEVICE_ID_INTEL_ADL 0x460e +#define PCI_DEVICE_ID_INTEL_ADL_PCH 0x51ee +#define PCI_DEVICE_ID_INTEL_ADLN 0x465e +#define PCI_DEVICE_ID_INTEL_ADLN_PCH 0x54ee #define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 #define PCI_DEVICE_ID_INTEL_RPL 0x460e #define PCI_DEVICE_ID_INTEL_RPLS 0x7a61 @@ -448,10 +449,13 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLP), + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADL_PCH), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, - { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLM), + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLN_PCH), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index d3f3937d7005..7c40f3ffc054 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -243,6 +243,7 @@ static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom) */ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) { + enum usb_device_speed max_speed; struct device *dev = qcom->dev; int ret; @@ -252,7 +253,7 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr"); if (IS_ERR(qcom->icc_path_ddr)) { dev_err(dev, "failed to get usb-ddr path: %ld\n", - PTR_ERR(qcom->icc_path_ddr)); + PTR_ERR(qcom->icc_path_ddr)); return PTR_ERR(qcom->icc_path_ddr); } @@ -263,21 +264,20 @@ static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom) return PTR_ERR(qcom->icc_path_apps); } - if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER || - usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN) + max_speed = usb_get_maximum_speed(&qcom->dwc3->dev); + if (max_speed >= USB_SPEED_SUPER || max_speed == USB_SPEED_UNKNOWN) { ret = icc_set_bw(qcom->icc_path_ddr, - USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); - else + USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW); + } else { ret = icc_set_bw(qcom->icc_path_ddr, - USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); - + USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW); + } if (ret) { dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret); return ret; } - ret = icc_set_bw(qcom->icc_path_apps, - APPS_USB_AVG_BW, APPS_USB_PEAK_BW); + ret = icc_set_bw(qcom->icc_path_apps, APPS_USB_AVG_BW, APPS_USB_PEAK_BW); if (ret) { dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret); return ret; @@ -1007,10 +1007,6 @@ static const struct dev_pm_ops dwc3_qcom_dev_pm_ops = { static const struct of_device_id dwc3_qcom_of_match[] = { { .compatible = "qcom,dwc3" }, - { .compatible = "qcom,msm8996-dwc3" }, - { .compatible = "qcom,msm8998-dwc3" }, - { .compatible = "qcom,sdm660-dwc3" }, - { .compatible = "qcom,sdm845-dwc3" }, { } }; MODULE_DEVICE_TABLE(of, dwc3_qcom_of_match); diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index 67b237c7a76a..8607d4c23283 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -47,6 +47,7 @@ struct dwc3_xlnx { struct device *dev; void __iomem *regs; int (*pltfm_init)(struct dwc3_xlnx *data); + struct phy *usb3_phy; }; static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask) @@ -100,13 +101,12 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) struct device *dev = priv_data->dev; struct reset_control *crst, *hibrst, *apbrst; struct gpio_desc *reset_gpio; - struct phy *usb3_phy; int ret = 0; u32 reg; - usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); - if (IS_ERR(usb3_phy)) { - ret = PTR_ERR(usb3_phy); + priv_data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); + if (IS_ERR(priv_data->usb3_phy)) { + ret = PTR_ERR(priv_data->usb3_phy); dev_err_probe(dev, ret, "failed to get USB3 PHY\n"); goto err; @@ -121,7 +121,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) * in use but the usb3-phy entry is missing from the device tree. * Therefore, skip these operations in this case. */ - if (!usb3_phy) + if (!priv_data->usb3_phy) goto skip_usb3_phy; crst = devm_reset_control_get_exclusive(dev, "usb_crst"); @@ -166,9 +166,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) goto err; } - ret = phy_init(usb3_phy); + ret = phy_init(priv_data->usb3_phy); if (ret < 0) { - phy_exit(usb3_phy); + phy_exit(priv_data->usb3_phy); goto err; } @@ -196,9 +196,9 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) goto err; } - ret = phy_power_on(usb3_phy); + ret = phy_power_on(priv_data->usb3_phy); if (ret < 0) { - phy_exit(usb3_phy); + phy_exit(priv_data->usb3_phy); goto err; } @@ -322,7 +322,7 @@ static int dwc3_xlnx_remove(struct platform_device *pdev) return 0; } -static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev) +static int __maybe_unused dwc3_xlnx_runtime_suspend(struct device *dev) { struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); @@ -331,7 +331,7 @@ static int __maybe_unused dwc3_xlnx_suspend_common(struct device *dev) return 0; } -static int __maybe_unused dwc3_xlnx_resume_common(struct device *dev) +static int __maybe_unused dwc3_xlnx_runtime_resume(struct device *dev) { struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); @@ -346,8 +346,45 @@ static int __maybe_unused dwc3_xlnx_runtime_idle(struct device *dev) return 0; } -static UNIVERSAL_DEV_PM_OPS(dwc3_xlnx_dev_pm_ops, dwc3_xlnx_suspend_common, - dwc3_xlnx_resume_common, dwc3_xlnx_runtime_idle); +static int __maybe_unused dwc3_xlnx_suspend(struct device *dev) +{ + struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); + + phy_exit(priv_data->usb3_phy); + + /* Disable the clocks */ + clk_bulk_disable(priv_data->num_clocks, priv_data->clks); + + return 0; +} + +static int __maybe_unused dwc3_xlnx_resume(struct device *dev) +{ + struct dwc3_xlnx *priv_data = dev_get_drvdata(dev); + int ret; + + ret = clk_bulk_enable(priv_data->num_clocks, priv_data->clks); + if (ret) + return ret; + + ret = phy_init(priv_data->usb3_phy); + if (ret < 0) + return ret; + + ret = phy_power_on(priv_data->usb3_phy); + if (ret < 0) { + phy_exit(priv_data->usb3_phy); + return ret; + } + + return 0; +} + +static const struct dev_pm_ops dwc3_xlnx_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(dwc3_xlnx_suspend, dwc3_xlnx_resume) + SET_RUNTIME_PM_OPS(dwc3_xlnx_runtime_suspend, + dwc3_xlnx_runtime_resume, dwc3_xlnx_runtime_idle) +}; static struct platform_driver dwc3_xlnx_driver = { .probe = dwc3_xlnx_probe, diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 197af63f8d05..61de693461da 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -197,7 +197,7 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, int ret; spin_lock_irqsave(&dwc->lock, flags); - if (!dep->endpoint.desc || !dwc->pullups_connected) { + if (!dep->endpoint.desc || !dwc->pullups_connected || !dwc->connected) { dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", dep->name); ret = -ESHUTDOWN; @@ -293,7 +293,10 @@ void dwc3_ep0_out_start(struct dwc3 *dwc) continue; dwc3_ep->flags &= ~DWC3_EP_DELAY_STOP; - dwc3_stop_active_transfer(dwc3_ep, true, true); + if (dwc->connected) + dwc3_stop_active_transfer(dwc3_ep, true, true); + else + dwc3_remove_requests(dwc, dwc3_ep, -ESHUTDOWN); } } @@ -815,7 +818,7 @@ static void dwc3_ep0_inspect_setup(struct dwc3 *dwc, int ret = -EINVAL; u32 len; - if (!dwc->gadget_driver || !dwc->connected) + if (!dwc->gadget_driver || !dwc->softconnect || !dwc->connected) goto out; trace_dwc3_ctrl_req(ctrl); @@ -1118,6 +1121,8 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, { switch (event->status) { case DEPEVT_STATUS_CONTROL_DATA: + if (!dwc->softconnect || !dwc->connected) + return; /* * We already have a DATA transfer in the controller's cache, * if we receive a XferNotReady(DATA) we will ignore it, unless diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index eca945feeec3..079cd333632e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -366,7 +366,9 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd, dwc3_writel(dep->regs, DWC3_DEPCMD, cmd); - if (!(cmd & DWC3_DEPCMD_CMDACT)) { + if (!(cmd & DWC3_DEPCMD_CMDACT) || + (DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER && + !(cmd & DWC3_DEPCMD_CMDIOC))) { ret = 0; goto skip_status; } @@ -965,29 +967,33 @@ out: return 0; } -static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) +void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep, int status) { struct dwc3_request *req; dwc3_stop_active_transfer(dep, true, false); + /* If endxfer is delayed, avoid unmapping requests */ + if (dep->flags & DWC3_EP_DELAY_STOP) + return; + /* - giveback all requests to gadget driver */ while (!list_empty(&dep->started_list)) { req = next_request(&dep->started_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } while (!list_empty(&dep->pending_list)) { req = next_request(&dep->pending_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } while (!list_empty(&dep->cancelled_list)) { req = next_request(&dep->cancelled_list); - dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + dwc3_gadget_giveback(dep, req, status); } } @@ -1005,6 +1011,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) { struct dwc3 *dwc = dep->dwc; u32 reg; + u32 mask; trace_dwc3_gadget_ep_disable(dep); @@ -1022,11 +1029,19 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep) dep->endpoint.desc = NULL; } - dwc3_remove_requests(dwc, dep); + dwc3_remove_requests(dwc, dep, -ECONNRESET); dep->stream_capable = false; dep->type = 0; - dep->flags &= DWC3_EP_TXFIFO_RESIZED; + mask = DWC3_EP_TXFIFO_RESIZED; + /* + * dwc3_remove_requests() can exit early if DWC3 EP delayed stop is + * set. Do not clear DEP flags, so that the end transfer command will + * be reattempted during the next SETUP stage. + */ + if (dep->flags & DWC3_EP_DELAY_STOP) + mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED); + dep->flags &= mask; return 0; } @@ -2340,7 +2355,7 @@ static void dwc3_stop_active_transfers(struct dwc3 *dwc) if (!dep) continue; - dwc3_remove_requests(dwc, dep); + dwc3_remove_requests(dwc, dep, -ESHUTDOWN); } } @@ -2440,7 +2455,7 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc) static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; - u32 timeout = 500; + u32 timeout = 2000; if (pm_runtime_suspended(dwc->dev)) return 0; @@ -2473,6 +2488,7 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) dwc3_gadget_dctl_write_safe(dwc, reg); do { + usleep_range(1000, 2000); reg = dwc3_readl(dwc->regs, DWC3_DSTS); reg &= DWC3_DSTS_DEVCTRLHLT; } while (--timeout && !(!is_on ^ !reg)); @@ -2501,6 +2517,9 @@ static int dwc3_gadget_soft_disconnect(struct dwc3 *dwc) if (dwc->ep0state != EP0_SETUP_PHASE) { int ret; + if (dwc->delayed_status) + dwc3_ep0_send_delayed_status(dwc); + reinit_completion(&dwc->ep0_in_setup); spin_unlock_irqrestore(&dwc->lock, flags); @@ -2568,6 +2587,8 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) return 0; } + synchronize_irq(dwc->irq_gadget); + if (!is_on) { ret = dwc3_gadget_soft_disconnect(dwc); } else { @@ -2718,6 +2739,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; + dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -2725,6 +2747,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc) } dep = dwc->eps[1]; + dep->flags = 0; ret = __dwc3_gadget_ep_enable(dep, DWC3_DEPCFG_ACTION_INIT); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); @@ -3568,7 +3591,7 @@ static void dwc3_gadget_endpoint_stream_event(struct dwc3_ep *dep, * streams are updated, and the device controller will not be * triggered to generate ERDY to move the next stream data. To * workaround this and maintain compatibility with various - * hosts, force to reinitate the stream until the host is ready + * hosts, force to reinitiate the stream until the host is ready * instead of waiting for the host to prime the endpoint. */ if (DWC3_VER_IS_WITHIN(DWC32, 100A, ANY)) { @@ -3596,11 +3619,12 @@ static void dwc3_endpoint_interrupt(struct dwc3 *dwc, dep = dwc->eps[epnum]; if (!(dep->flags & DWC3_EP_ENABLED)) { - if (!(dep->flags & DWC3_EP_TRANSFER_STARTED)) + if ((epnum > 1) && !(dep->flags & DWC3_EP_TRANSFER_STARTED)) return; /* Handle only EPCMDCMPLT when EP disabled */ - if (event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) + if ((event->endpoint_event != DWC3_DEPEVT_EPCMDCMPLT) && + !(epnum <= 1 && event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE)) return; } @@ -3695,7 +3719,7 @@ void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, * timeout. Delay issuing the End Transfer command until the Setup TRB is * prepared. */ - if (dwc->ep0state != EP0_SETUP_PHASE && !dwc->delayed_status) { + if (dwc->ep0state != EP0_SETUP_PHASE) { dep->flags |= DWC3_EP_DELAY_STOP; return; } @@ -3763,13 +3787,24 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) reg &= ~DWC3_DCTL_INITU2ENA; dwc3_gadget_dctl_write_safe(dwc, reg); + dwc->connected = false; + dwc3_disconnect_gadget(dwc); dwc->gadget->speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; usb_gadget_set_state(dwc->gadget, USB_STATE_NOTATTACHED); - dwc->connected = false; + if (dwc->ep0state != EP0_SETUP_PHASE) { + unsigned int dir; + + dir = !!dwc->ep0_expect_in; + if (dwc->ep0state == EP0_DATA_PHASE) + dwc3_ep0_end_control_data(dwc, dwc->eps[dir]); + else + dwc3_ep0_end_control_data(dwc, dwc->eps[!dir]); + dwc3_ep0_stall_and_restart(dwc); + } } static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) @@ -3867,6 +3902,9 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) u8 lanes = 1; u8 speed; + if (!dwc->softconnect) + return; + reg = dwc3_readl(dwc->regs, DWC3_DSTS); speed = reg & DWC3_DSTS_CONNECTSPD; dwc->speed = speed; @@ -4129,7 +4167,7 @@ static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, unsigned int is_ss = evtinfo & BIT(4); /* - * WORKAROUND: DWC3 revison 2.20a with hibernation support + * WORKAROUND: DWC3 revision 2.20a with hibernation support * have a known issue which can cause USB CV TD.9.23 to fail * randomly. * @@ -4507,12 +4545,17 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_suspend(struct dwc3 *dwc) { + unsigned long flags; + if (!dwc->gadget_driver) return 0; dwc3_gadget_run_stop(dwc, false, false); + + spin_lock_irqsave(&dwc->lock, flags); dwc3_disconnect_gadget(dwc); __dwc3_gadget_stop(dwc); + spin_unlock_irqrestore(&dwc->lock, flags); return 0; } diff --git a/drivers/usb/dwc3/trace.h b/drivers/usb/dwc3/trace.h index cb998ba50fea..1975aec8d36d 100644 --- a/drivers/usb/dwc3/trace.h +++ b/drivers/usb/dwc3/trace.h @@ -241,7 +241,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, __entry->enqueue = dep->trb_enqueue; __entry->dequeue = dep->trb_dequeue; ), - TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + TP_printk("%s: trb %p (E%d:D%d) buf %08x%08x size %s%d ctrl %08x sofn %08x (%c%c%c%c:%c%c:%s)", __get_str(name), __entry->trb, __entry->enqueue, __entry->dequeue, __entry->bph, __entry->bpl, ({char *s; @@ -267,6 +267,7 @@ DECLARE_EVENT_CLASS(dwc3_log_trb, s = ""; } s; }), DWC3_TRB_SIZE_LENGTH(__entry->size), __entry->ctrl, + DWC3_TRB_CTRL_GET_SID_SOFN(__entry->ctrl), __entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h', __entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l', __entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c', diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index e0fa4b186ec6..73dc10a77cde 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2645,10 +2645,10 @@ static int __ffs_data_got_strings(struct ffs_data *ffs, unsigned i = 0; vla_group(d); vla_item(d, struct usb_gadget_strings *, stringtabs, - lang_count + 1); + size_add(lang_count, 1)); vla_item(d, struct usb_gadget_strings, stringtab, lang_count); vla_item(d, struct usb_string, strings, - lang_count*(needed_count+1)); + size_mul(lang_count, (needed_count + 1))); char *vlabuf = kmalloc(vla_group_size(d), GFP_KERNEL); @@ -3700,7 +3700,7 @@ int ffs_name_dev(struct ffs_dev *dev, const char *name) existing = _ffs_do_find_dev(name); if (!existing) - strlcpy(dev->name, name, ARRAY_SIZE(dev->name)); + strscpy(dev->name, name, ARRAY_SIZE(dev->name)); else if (existing != dev) ret = -EBUSY; diff --git a/drivers/usb/gadget/function/f_mass_storage.c b/drivers/usb/gadget/function/f_mass_storage.c index 925e99f9775c..3abf7f586e2a 100644 --- a/drivers/usb/gadget/function/f_mass_storage.c +++ b/drivers/usb/gadget/function/f_mass_storage.c @@ -2662,11 +2662,16 @@ static ssize_t forced_eject_store(struct device *dev, } static DEVICE_ATTR_RW(nofua); -/* mode wil be set in fsg_lun_attr_is_visible() */ -static DEVICE_ATTR(ro, 0, ro_show, ro_store); -static DEVICE_ATTR(file, 0, file_show, file_store); static DEVICE_ATTR_WO(forced_eject); +/* + * Mode of the ro and file attribute files will be overridden in + * fsg_lun_dev_is_visible() depending on if this is a cdrom, or if it is a + * removable device. + */ +static DEVICE_ATTR_RW(ro); +static DEVICE_ATTR_RW(file); + /****************************** FSG COMMON ******************************/ static void fsg_lun_release(struct device *dev) diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index dc8f078f918c..c36bcfa0e9b4 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -450,39 +450,35 @@ struct ndp_parser_opts { unsigned next_ndp_index; }; -#define INIT_NDP16_OPTS { \ - .nth_sign = USB_CDC_NCM_NTH16_SIGN, \ - .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth16), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \ - .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), \ - .ndplen_align = 4, \ - .dgram_item_len = 1, \ - .block_length = 1, \ - .ndp_index = 1, \ - .reserved1 = 0, \ - .reserved2 = 0, \ - .next_ndp_index = 1, \ - } - - -#define INIT_NDP32_OPTS { \ - .nth_sign = USB_CDC_NCM_NTH32_SIGN, \ - .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth32), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \ - .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), \ - .ndplen_align = 8, \ - .dgram_item_len = 2, \ - .block_length = 2, \ - .ndp_index = 2, \ - .reserved1 = 1, \ - .reserved2 = 2, \ - .next_ndp_index = 2, \ - } +static const struct ndp_parser_opts ndp16_opts = { + .nth_sign = USB_CDC_NCM_NTH16_SIGN, + .ndp_sign = USB_CDC_NCM_NDP16_NOCRC_SIGN, + .nth_size = sizeof(struct usb_cdc_ncm_nth16), + .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), + .dpe_size = sizeof(struct usb_cdc_ncm_dpe16), + .ndplen_align = 4, + .dgram_item_len = 1, + .block_length = 1, + .ndp_index = 1, + .reserved1 = 0, + .reserved2 = 0, + .next_ndp_index = 1, +}; -static const struct ndp_parser_opts ndp16_opts = INIT_NDP16_OPTS; -static const struct ndp_parser_opts ndp32_opts = INIT_NDP32_OPTS; +static const struct ndp_parser_opts ndp32_opts = { + .nth_sign = USB_CDC_NCM_NTH32_SIGN, + .ndp_sign = USB_CDC_NCM_NDP32_NOCRC_SIGN, + .nth_size = sizeof(struct usb_cdc_ncm_nth32), + .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), + .dpe_size = sizeof(struct usb_cdc_ncm_dpe32), + .ndplen_align = 8, + .dgram_item_len = 2, + .block_length = 2, + .ndp_index = 2, + .reserved1 = 1, + .reserved2 = 2, + .next_ndp_index = 2, +}; static inline void put_ncm(__le16 **p, unsigned size, unsigned val) { diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index abec5c58f525..a881c69b1f2b 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -89,7 +89,7 @@ struct printer_dev { u8 printer_cdev_open; wait_queue_head_t wait; unsigned q_len; - char *pnp_string; /* We don't own memory! */ + char **pnp_string; /* We don't own memory! */ struct usb_function function; }; @@ -1000,16 +1000,16 @@ static int printer_func_setup(struct usb_function *f, if ((wIndex>>8) != dev->interface) break; - if (!dev->pnp_string) { + if (!*dev->pnp_string) { value = 0; break; } - value = strlen(dev->pnp_string); + value = strlen(*dev->pnp_string); buf[0] = (value >> 8) & 0xFF; buf[1] = value & 0xFF; - memcpy(buf + 2, dev->pnp_string, value); + memcpy(buf + 2, *dev->pnp_string, value); DBG(dev, "1284 PNP String: %x %s\n", value, - dev->pnp_string); + *dev->pnp_string); break; case GET_PORT_STATUS: /* Get Port Status */ @@ -1475,7 +1475,7 @@ static struct usb_function *gprinter_alloc(struct usb_function_instance *fi) kref_init(&dev->kref); ++opts->refcnt; dev->minor = opts->minor; - dev->pnp_string = opts->pnp_string; + dev->pnp_string = &opts->pnp_string; dev->q_len = opts->q_len; mutex_unlock(&opts->lock); diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 8e17ac831be0..658e2e21fdd0 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -2306,7 +2306,7 @@ static struct usb_function *tcm_alloc(struct usb_function_instance *fi) DECLARE_USB_FUNCTION(tcm, tcm_alloc_inst, tcm_alloc); -static int tcm_init(void) +static int __init tcm_init(void) { int ret; @@ -2322,7 +2322,7 @@ static int tcm_init(void) } module_init(tcm_init); -static void tcm_exit(void) +static void __exit tcm_exit(void) { target_unregister_template(&usbg_ops); usb_function_unregister(&tcmusb_func); diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c index 71669e0e4d00..e6948cf8def3 100644 --- a/drivers/usb/gadget/function/f_uvc.c +++ b/drivers/usb/gadget/function/f_uvc.c @@ -430,7 +430,7 @@ uvc_register_video(struct uvc_device *uvc) uvc->vdev.vfl_dir = VFL_DIR_TX; uvc->vdev.lock = &uvc->video.mutex; uvc->vdev.device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; - strlcpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name)); + strscpy(uvc->vdev.name, cdev->gadget->name, sizeof(uvc->vdev.name)); video_set_drvdata(&uvc->vdev, uvc); @@ -888,6 +888,7 @@ static void uvc_free(struct usb_function *f) struct uvc_device *uvc = to_uvc(f); struct f_uvc_opts *opts = container_of(f->fi, struct f_uvc_opts, func_inst); + config_item_put(&uvc->header->item); --opts->refcnt; kfree(uvc); } @@ -897,10 +898,14 @@ static void uvc_function_unbind(struct usb_configuration *c, { struct usb_composite_dev *cdev = c->cdev; struct uvc_device *uvc = to_uvc(f); + struct uvc_video *video = &uvc->video; long wait_ret = 1; uvcg_info(f, "%s()\n", __func__); + if (video->async_wq) + destroy_workqueue(video->async_wq); + /* * If we know we're connected via v4l2, then there should be a cleanup * of the device from userspace either via UVC_EVENT_DISCONNECT or @@ -941,6 +946,7 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) struct uvc_device *uvc; struct f_uvc_opts *opts; struct uvc_descriptor_header **strm_cls; + struct config_item *streaming, *header, *h; uvc = kzalloc(sizeof(*uvc), GFP_KERNEL); if (uvc == NULL) @@ -973,6 +979,29 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) uvc->desc.fs_streaming = opts->fs_streaming; uvc->desc.hs_streaming = opts->hs_streaming; uvc->desc.ss_streaming = opts->ss_streaming; + + streaming = config_group_find_item(&opts->func_inst.group, "streaming"); + if (!streaming) + goto err_config; + + header = config_group_find_item(to_config_group(streaming), "header"); + config_item_put(streaming); + if (!header) + goto err_config; + + h = config_group_find_item(to_config_group(header), "h"); + config_item_put(header); + if (!h) + goto err_config; + + uvc->header = to_uvcg_streaming_header(h); + config_item_put(h); + if (!uvc->header->linked) { + mutex_unlock(&opts->lock); + kfree(uvc); + return ERR_PTR(-EBUSY); + } + ++opts->refcnt; mutex_unlock(&opts->lock); @@ -988,6 +1017,11 @@ static struct usb_function *uvc_alloc(struct usb_function_instance *fi) uvc->func.bind_deactivated = true; return &uvc->func; + +err_config: + mutex_unlock(&opts->lock); + kfree(uvc); + return ERR_PTR(-ENOENT); } DECLARE_USB_FUNCTION_INIT(uvc, uvc_alloc_inst, uvc_alloc); diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 713efd9aefde..29bf8664bf58 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -869,7 +869,7 @@ EXPORT_SYMBOL_GPL(rndis_msg_parser); static inline int rndis_get_nr(void) { - return ida_simple_get(&rndis_ida, 0, 0, GFP_KERNEL); + return ida_simple_get(&rndis_ida, 0, 1000, GFP_KERNEL); } static inline void rndis_put_nr(int nr) @@ -1105,7 +1105,7 @@ static int rndis_proc_show(struct seq_file *m, void *v) "used : %s\n" "state : %s\n" "medium : 0x%08X\n" - "speed : %d\n" + "speed : %u\n" "cable : %s\n" "vendor ID : 0x%08X\n" "vendor : %s\n", diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 7887def05dc2..e06022873df1 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -144,10 +144,10 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) { struct eth_dev *dev = netdev_priv(net); - strlcpy(p->driver, "g_ether", sizeof(p->driver)); - strlcpy(p->version, UETH__VERSION, sizeof(p->version)); - strlcpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); - strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); + strscpy(p->driver, "g_ether", sizeof(p->driver)); + strscpy(p->version, UETH__VERSION, sizeof(p->version)); + strscpy(p->fw_version, dev->gadget->name, sizeof(p->fw_version)); + strscpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof(p->bus_info)); } /* REVISIT can also support: diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 6f68cbeeee7c..7538279f9817 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -1443,7 +1443,7 @@ void gserial_resume(struct gserial *gser) } EXPORT_SYMBOL_GPL(gserial_resume); -static int userial_init(void) +static int __init userial_init(void) { struct tty_driver *driver; unsigned i; @@ -1496,7 +1496,7 @@ fail: } module_init(userial_init); -static void userial_cleanup(void) +static void __exit userial_cleanup(void) { tty_unregister_driver(gs_tty_driver); tty_driver_kref_put(gs_tty_driver); diff --git a/drivers/usb/gadget/function/uvc.h b/drivers/usb/gadget/function/uvc.h index 58e383afdd44..40226b1f7e14 100644 --- a/drivers/usb/gadget/function/uvc.h +++ b/drivers/usb/gadget/function/uvc.h @@ -88,6 +88,7 @@ struct uvc_video { struct usb_ep *ep; struct work_struct pump; + struct workqueue_struct *async_wq; /* Frame parameters */ u8 bpp; @@ -133,6 +134,8 @@ struct uvc_device { bool func_connected; wait_queue_head_t func_connected_queue; + struct uvcg_streaming_header *header; + /* Descriptors */ struct { const struct uvc_descriptor_header * const *fs_control; diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c index fd8f73bb726d..c4ed48d6b8a4 100644 --- a/drivers/usb/gadget/function/uvc_v4l2.c +++ b/drivers/usb/gadget/function/uvc_v4l2.c @@ -18,12 +18,161 @@ #include <media/v4l2-dev.h> #include <media/v4l2-event.h> #include <media/v4l2-ioctl.h> +#include <media/v4l2-uvc.h> #include "f_uvc.h" #include "uvc.h" #include "uvc_queue.h" #include "uvc_video.h" #include "uvc_v4l2.h" +#include "uvc_configfs.h" + +static struct uvc_format_desc *to_uvc_format(struct uvcg_format *uformat) +{ + char guid[16] = UVC_GUID_FORMAT_MJPEG; + struct uvc_format_desc *format; + struct uvcg_uncompressed *unc; + + if (uformat->type == UVCG_UNCOMPRESSED) { + unc = to_uvcg_uncompressed(&uformat->group.cg_item); + if (!unc) + return ERR_PTR(-EINVAL); + + memcpy(guid, unc->desc.guidFormat, sizeof(guid)); + } + + format = uvc_format_by_guid(guid); + if (!format) + return ERR_PTR(-EINVAL); + + return format; +} + +static int uvc_v4l2_get_bytesperline(struct uvcg_format *uformat, + struct uvcg_frame *uframe) +{ + struct uvcg_uncompressed *u; + + if (uformat->type == UVCG_UNCOMPRESSED) { + u = to_uvcg_uncompressed(&uformat->group.cg_item); + if (!u) + return 0; + + return u->desc.bBitsPerPixel * uframe->frame.w_width / 8; + } + + return 0; +} + +static int uvc_get_frame_size(struct uvcg_format *uformat, + struct uvcg_frame *uframe) +{ + unsigned int bpl = uvc_v4l2_get_bytesperline(uformat, uframe); + + return bpl ? bpl * uframe->frame.w_height : + uframe->frame.dw_max_video_frame_buffer_size; +} + +static struct uvcg_format *find_format_by_index(struct uvc_device *uvc, int index) +{ + struct uvcg_format_ptr *format; + struct uvcg_format *uformat = NULL; + int i = 1; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (index == i) { + uformat = format->fmt; + break; + } + i++; + } + + return uformat; +} + +static struct uvcg_frame *find_frame_by_index(struct uvc_device *uvc, + struct uvcg_format *uformat, + int index) +{ + struct uvcg_format_ptr *format; + struct uvcg_frame_ptr *frame; + struct uvcg_frame *uframe = NULL; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (format->fmt->type != uformat->type) + continue; + list_for_each_entry(frame, &format->fmt->frames, entry) { + if (index == frame->frm->frame.b_frame_index) { + uframe = frame->frm; + break; + } + } + } + + return uframe; +} + +static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc, + u32 pixelformat) +{ + struct uvcg_format_ptr *format; + struct uvcg_format *uformat = NULL; + + list_for_each_entry(format, &uvc->header->formats, entry) { + struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt); + + if (fmtdesc->fcc == pixelformat) { + uformat = format->fmt; + break; + } + } + + return uformat; +} + +static struct uvcg_frame *find_closest_frame_by_size(struct uvc_device *uvc, + struct uvcg_format *uformat, + u16 rw, u16 rh) +{ + struct uvc_video *video = &uvc->video; + struct uvcg_format_ptr *format; + struct uvcg_frame_ptr *frame; + struct uvcg_frame *uframe = NULL; + unsigned int d, maxd; + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + maxd = (unsigned int)-1; + + list_for_each_entry(format, &uvc->header->formats, entry) { + if (format->fmt->type != uformat->type) + continue; + + list_for_each_entry(frame, &format->fmt->frames, entry) { + u16 w, h; + + w = frame->frm->frame.w_width; + h = frame->frm->frame.w_height; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + uframe = frame->frm; + } + + if (maxd == 0) + break; + } + } + + if (!uframe) + uvcg_dbg(&video->uvc->func, "Unsupported size %ux%u\n", rw, rh); + + return uframe; +} /* -------------------------------------------------------------------------- * Requests handling @@ -67,9 +216,9 @@ uvc_v4l2_querycap(struct file *file, void *fh, struct v4l2_capability *cap) struct uvc_device *uvc = video_get_drvdata(vdev); struct usb_composite_dev *cdev = uvc->func.config->cdev; - strlcpy(cap->driver, "g_uvc", sizeof(cap->driver)); - strlcpy(cap->card, cdev->gadget->name, sizeof(cap->card)); - strlcpy(cap->bus_info, dev_name(&cdev->gadget->dev), + strscpy(cap->driver, "g_uvc", sizeof(cap->driver)); + strscpy(cap->card, cdev->gadget->name, sizeof(cap->card)); + strscpy(cap->bus_info, dev_name(&cdev->gadget->dev), sizeof(cap->bus_info)); return 0; } @@ -135,6 +284,139 @@ uvc_v4l2_set_format(struct file *file, void *fh, struct v4l2_format *fmt) } static int +uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvc_video *video = &uvc->video; + struct uvcg_format *uformat; + struct uvcg_frame *uframe; + u8 *fcc; + + if (fmt->type != video->queue.queue.type) + return -EINVAL; + + fcc = (u8 *)&fmt->fmt.pix.pixelformat; + uvcg_dbg(&uvc->func, "Trying format 0x%08x (%c%c%c%c): %ux%u\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + uformat = find_format_by_pix(uvc, fmt->fmt.pix.pixelformat); + if (!uformat) + return -EINVAL; + + uframe = find_closest_frame_by_size(uvc, uformat, + fmt->fmt.pix.width, fmt->fmt.pix.height); + if (!uframe) + return -EINVAL; + + fmt->fmt.pix.width = uframe->frame.w_width; + fmt->fmt.pix.height = uframe->frame.w_height; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe); + fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe); + fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc; + fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int +uvc_v4l2_enum_frameintervals(struct file *file, void *fh, + struct v4l2_frmivalenum *fival) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvcg_format *uformat = NULL; + struct uvcg_frame *uframe = NULL; + struct uvcg_frame_ptr *frame; + + uformat = find_format_by_pix(uvc, fival->pixel_format); + if (!uformat) + return -EINVAL; + + list_for_each_entry(frame, &uformat->frames, entry) { + if (frame->frm->frame.w_width == fival->width && + frame->frm->frame.w_height == fival->height) { + uframe = frame->frm; + break; + } + } + if (!uframe) + return -EINVAL; + + if (fival->index >= uframe->frame.b_frame_interval_type) + return -EINVAL; + + fival->discrete.numerator = + uframe->dw_frame_interval[fival->index]; + + /* TODO: handle V4L2_FRMIVAL_TYPE_STEPWISE */ + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.denominator = 10000000; + v4l2_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + + return 0; +} + +static int +uvc_v4l2_enum_framesizes(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvcg_format *uformat = NULL; + struct uvcg_frame *uframe = NULL; + + uformat = find_format_by_pix(uvc, fsize->pixel_format); + if (!uformat) + return -EINVAL; + + if (fsize->index >= uformat->num_frames) + return -EINVAL; + + uframe = find_frame_by_index(uvc, uformat, fsize->index + 1); + if (!uframe) + return -EINVAL; + + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = uframe->frame.w_width; + fsize->discrete.height = uframe->frame.w_height; + + return 0; +} + +static int +uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_device *uvc = video_get_drvdata(vdev); + struct uvc_format_desc *fmtdesc; + struct uvcg_format *uformat; + + if (f->index >= uvc->header->num_fmt) + return -EINVAL; + + uformat = find_format_by_index(uvc, f->index + 1); + if (!uformat) + return -EINVAL; + + if (uformat->type != UVCG_UNCOMPRESSED) + f->flags |= V4L2_FMT_FLAG_COMPRESSED; + + fmtdesc = to_uvc_format(uformat); + f->pixelformat = fmtdesc->fcc; + + strscpy(f->description, fmtdesc->name, sizeof(f->description)); + f->description[strlen(fmtdesc->name) - 1] = 0; + + return 0; +} + +static int uvc_v4l2_reqbufs(struct file *file, void *fh, struct v4l2_requestbuffers *b) { struct video_device *vdev = video_devdata(file); @@ -170,7 +452,7 @@ uvc_v4l2_qbuf(struct file *file, void *fh, struct v4l2_buffer *b) return ret; if (uvc->state == UVC_STATE_STREAMING) - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); return ret; } @@ -298,8 +580,12 @@ uvc_v4l2_ioctl_default(struct file *file, void *fh, bool valid_prio, const struct v4l2_ioctl_ops uvc_v4l2_ioctl_ops = { .vidioc_querycap = uvc_v4l2_querycap, + .vidioc_try_fmt_vid_out = uvc_v4l2_try_format, .vidioc_g_fmt_vid_out = uvc_v4l2_get_format, .vidioc_s_fmt_vid_out = uvc_v4l2_set_format, + .vidioc_enum_frameintervals = uvc_v4l2_enum_frameintervals, + .vidioc_enum_framesizes = uvc_v4l2_enum_framesizes, + .vidioc_enum_fmt_vid_out = uvc_v4l2_enum_format, .vidioc_reqbufs = uvc_v4l2_reqbufs, .vidioc_querybuf = uvc_v4l2_querybuf, .vidioc_qbuf = uvc_v4l2_qbuf, diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index c00ce0e91f5d..bb037fcc90e6 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -277,7 +277,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock_irqrestore(&video->req_lock, flags); if (uvc->state == UVC_STATE_STREAMING) - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); } static int @@ -485,7 +485,7 @@ int uvcg_video_enable(struct uvc_video *video, int enable) video->req_int_count = 0; - schedule_work(&video->pump); + queue_work(video->async_wq, &video->pump); return ret; } @@ -499,6 +499,11 @@ int uvcg_video_init(struct uvc_video *video, struct uvc_device *uvc) spin_lock_init(&video->req_lock); INIT_WORK(&video->pump, uvcg_video_pump); + /* Allocate a work queue for asynchronous video pump handler. */ + video->async_wq = alloc_workqueue("uvcgadget", WQ_UNBOUND | WQ_HIGHPRI, 0); + if (!video->async_wq) + return -EINVAL; + video->uvc = uvc; video->fcc = V4L2_PIX_FMT_YUYV; video->bpp = 16; diff --git a/drivers/usb/gadget/udc/at91_udc.c b/drivers/usb/gadget/udc/at91_udc.c index 728987280373..a9a7b3fc60ec 100644 --- a/drivers/usb/gadget/udc/at91_udc.c +++ b/drivers/usb/gadget/udc/at91_udc.c @@ -994,7 +994,7 @@ static const struct usb_gadget_ops at91_udc_ops = { .udc_stop = at91_stop, /* - * VBUS-powered devices may also also want to support bigger + * VBUS-powered devices may also want to support bigger * power budgets after an appropriate SET_CONFIGURATION. */ /* .vbus_power = at91_vbus_power, */ @@ -1779,12 +1779,14 @@ static void at91udc_of_init(struct at91_udc *udc, struct device_node *np) if (of_property_read_u32(np, "atmel,vbus-polled", &val) == 0) board->vbus_polled = 1; - board->vbus_pin = gpiod_get_from_of_node(np, "atmel,vbus-gpio", 0, - GPIOD_IN, "udc_vbus"); + board->vbus_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,vbus", 0, GPIOD_IN, + "udc_vbus"); if (IS_ERR(board->vbus_pin)) board->vbus_pin = NULL; - board->pullup_pin = gpiod_get_from_of_node(np, "atmel,pullup-gpio", 0, + board->pullup_pin = fwnode_gpiod_get_index(of_fwnode_handle(np), + "atmel,pullup", 0, GPIOD_ASIS, "udc_pullup"); if (IS_ERR(board->pullup_pin)) board->pullup_pin = NULL; diff --git a/drivers/usb/gadget/udc/net2272.c b/drivers/usb/gadget/udc/net2272.c index c97cd4bc817c..84605a4d0715 100644 --- a/drivers/usb/gadget/udc/net2272.c +++ b/drivers/usb/gadget/udc/net2272.c @@ -91,7 +91,7 @@ module_param(dma_mode, ushort, 0644); * mode 2 == ep-a 1k, ep-b 1k, ep-c 512db * mode 3 == ep-a 1k, ep-b disabled, ep-c 512db */ -static ushort fifo_mode = 0; +static ushort fifo_mode; module_param(fifo_mode, ushort, 0644); /* @@ -100,7 +100,7 @@ module_param(fifo_mode, ushort, 0644); * USB suspend requests will be ignored. This is acceptable for * self-powered devices. For bus powered devices set this to 1. */ -static ushort enable_suspend = 0; +static ushort enable_suspend; module_param(enable_suspend, ushort, 0644); static void assert_out_naking(struct net2272_ep *ep, const char *where) diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 61cabb9de6ae..b0567c63d754 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2558,7 +2558,7 @@ omap_ep_setup(char *name, u8 addr, u8 type, /* set up driver data structures */ BUG_ON(strlen(name) >= sizeof ep->name); - strlcpy(ep->name, name, sizeof ep->name); + strscpy(ep->name, name, sizeof(ep->name)); INIT_LIST_HEAD(&ep->queue); INIT_LIST_HEAD(&ep->iso); ep->bEndpointAddress = addr; diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 648be3fd476a..615ba0a6fbee 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -17,6 +17,7 @@ #include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/reset.h> #include <linux/sizes.h> #include <linux/slab.h> #include <linux/string.h> @@ -38,16 +39,16 @@ #define USB3_USB20_CON 0x204 #define USB3_USB30_CON 0x208 #define USB3_USB_STA 0x210 -#define USB3_DRD_CON 0x218 +#define USB3_DRD_CON(p) ((p)->is_rzv2m ? 0x400 : 0x218) #define USB3_USB_INT_STA_1 0x220 #define USB3_USB_INT_STA_2 0x224 #define USB3_USB_INT_ENA_1 0x228 #define USB3_USB_INT_ENA_2 0x22c #define USB3_STUP_DAT_0 0x230 #define USB3_STUP_DAT_1 0x234 -#define USB3_USB_OTG_STA 0x268 -#define USB3_USB_OTG_INT_STA 0x26c -#define USB3_USB_OTG_INT_ENA 0x270 +#define USB3_USB_OTG_STA(p) ((p)->is_rzv2m ? 0x410 : 0x268) +#define USB3_USB_OTG_INT_STA(p) ((p)->is_rzv2m ? 0x414 : 0x26c) +#define USB3_USB_OTG_INT_ENA(p) ((p)->is_rzv2m ? 0x418 : 0x270) #define USB3_P0_MOD 0x280 #define USB3_P0_CON 0x288 #define USB3_P0_STA 0x28c @@ -135,6 +136,8 @@ #define USB_STA_VBUS_STA BIT(0) /* DRD_CON */ +#define DRD_CON_PERI_RST BIT(31) /* rzv2m only */ +#define DRD_CON_HOST_RST BIT(30) /* rzv2m only */ #define DRD_CON_PERI_CON BIT(24) #define DRD_CON_VBOUT BIT(0) @@ -155,7 +158,7 @@ #define USB_INT_2_PIPE(n) BIT(n) /* USB_OTG_STA, USB_OTG_INT_STA and USB_OTG_INT_ENA */ -#define USB_OTG_IDMON BIT(4) +#define USB_OTG_IDMON(p) ((p)->is_rzv2m ? BIT(0) : BIT(4)) /* P0_MOD */ #define P0_MOD_DIR BIT(6) @@ -255,7 +258,7 @@ #define USB3_EP0_SS_MAX_PACKET_SIZE 512 #define USB3_EP0_HSFS_MAX_PACKET_SIZE 64 #define USB3_EP0_BUF_SIZE 8 -#define USB3_MAX_NUM_PIPES 6 /* This includes PIPE 0 */ +#define USB3_MAX_NUM_PIPES(p) ((p)->is_rzv2m ? 16 : 6) /* This includes PIPE 0 */ #define USB3_WAIT_US 3 #define USB3_DMA_NUM_SETTING_AREA 4 /* @@ -326,10 +329,13 @@ struct renesas_usb3_priv { int num_ramif; int ramsize_per_pipe; /* unit = bytes */ bool workaround_for_vbus; /* if true, don't check vbus signal */ + bool is_rzv2m; /* if true, RZ/V2M SoC */ }; struct renesas_usb3 { void __iomem *reg; + struct reset_control *drd_rstc; + struct reset_control *usbp_rstc; struct usb_gadget gadget; struct usb_gadget_driver *driver; @@ -363,6 +369,7 @@ struct renesas_usb3 { bool forced_b_device; bool start_to_connect; bool role_sw_by_connector; + bool is_rzv2m; }; #define gadget_to_renesas_usb3(_gadget) \ @@ -467,7 +474,7 @@ static void usb3_disable_pipe_irq(struct renesas_usb3 *usb3, int num) static bool usb3_is_host(struct renesas_usb3 *usb3) { - return !(usb3_read(usb3, USB3_DRD_CON) & DRD_CON_PERI_CON); + return !(usb3_read(usb3, USB3_DRD_CON(usb3)) & DRD_CON_PERI_CON); } static void usb3_init_axi_bridge(struct renesas_usb3 *usb3) @@ -674,10 +681,20 @@ static void renesas_usb3_role_work(struct work_struct *work) static void usb3_set_mode(struct renesas_usb3 *usb3, bool host) { + if (usb3->is_rzv2m) { + if (host) { + usb3_set_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + } else { + usb3_set_bit(usb3, DRD_CON_HOST_RST, USB3_DRD_CON(usb3)); + usb3_clear_bit(usb3, DRD_CON_PERI_RST, USB3_DRD_CON(usb3)); + } + } + if (host) - usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); else - usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON); + usb3_set_bit(usb3, DRD_CON_PERI_CON, USB3_DRD_CON(usb3)); } static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host) @@ -693,9 +710,9 @@ static void usb3_set_mode_by_role_sw(struct renesas_usb3 *usb3, bool host) static void usb3_vbus_out(struct renesas_usb3 *usb3, bool enable) { if (enable) - usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); + usb3_set_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); else - usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON); + usb3_clear_bit(usb3, DRD_CON_VBOUT, USB3_DRD_CON(usb3)); } static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) @@ -716,7 +733,7 @@ static void usb3_mode_config(struct renesas_usb3 *usb3, bool host, bool a_dev) static bool usb3_is_a_device(struct renesas_usb3 *usb3) { - return !(usb3_read(usb3, USB3_USB_OTG_STA) & USB_OTG_IDMON); + return !(usb3_read(usb3, USB3_USB_OTG_STA(usb3)) & USB_OTG_IDMON(usb3)); } static void usb3_check_id(struct renesas_usb3 *usb3) @@ -739,8 +756,8 @@ static void renesas_usb3_init_controller(struct renesas_usb3 *usb3) usb3_set_bit(usb3, USB_COM_CON_PN_WDATAIF_NL | USB_COM_CON_PN_RDATAIF_NL | USB_COM_CON_PN_LSTTR_PP, USB3_USB_COM_CON); - usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_STA); - usb3_write(usb3, USB_OTG_IDMON, USB3_USB_OTG_INT_ENA); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_STA(usb3)); + usb3_write(usb3, USB_OTG_IDMON(usb3), USB3_USB_OTG_INT_ENA(usb3)); usb3_check_id(usb3); usb3_check_vbus(usb3); @@ -750,7 +767,7 @@ static void renesas_usb3_stop_controller(struct renesas_usb3 *usb3) { usb3_disconnect(usb3); usb3_write(usb3, 0, USB3_P0_INT_ENA); - usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA); + usb3_write(usb3, 0, USB3_USB_OTG_INT_ENA(usb3)); usb3_write(usb3, 0, USB3_USB_INT_ENA_1); usb3_write(usb3, 0, USB3_USB_INT_ENA_2); usb3_write(usb3, 0, USB3_AXI_INT_ENA); @@ -2005,9 +2022,15 @@ static void usb3_irq_idmon_change(struct renesas_usb3 *usb3) usb3_check_id(usb3); } -static void usb3_irq_otg_int(struct renesas_usb3 *usb3, u32 otg_int_sta) +static void usb3_irq_otg_int(struct renesas_usb3 *usb3) { - if (otg_int_sta & USB_OTG_IDMON) + u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA(usb3)); + + otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA(usb3)); + if (otg_int_sta) + usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA(usb3)); + + if (otg_int_sta & USB_OTG_IDMON(usb3)) usb3_irq_idmon_change(usb3); } @@ -2015,7 +2038,6 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3) { u32 int_sta_1 = usb3_read(usb3, USB3_USB_INT_STA_1); u32 int_sta_2 = usb3_read(usb3, USB3_USB_INT_STA_2); - u32 otg_int_sta = usb3_read(usb3, USB3_USB_OTG_INT_STA); int_sta_1 &= usb3_read(usb3, USB3_USB_INT_ENA_1); if (int_sta_1) { @@ -2027,11 +2049,8 @@ static void usb3_irq_epc(struct renesas_usb3 *usb3) if (int_sta_2) usb3_irq_epc_int_2(usb3, int_sta_2); - otg_int_sta &= usb3_read(usb3, USB3_USB_OTG_INT_ENA); - if (otg_int_sta) { - usb3_write(usb3, otg_int_sta, USB3_USB_OTG_INT_STA); - usb3_irq_otg_int(usb3, otg_int_sta); - } + if (!usb3->is_rzv2m) + usb3_irq_otg_int(usb3); } static void usb3_irq_dma_int(struct renesas_usb3 *usb3, u32 dma_sta) @@ -2085,6 +2104,15 @@ static irqreturn_t renesas_usb3_irq(int irq, void *_usb3) return ret; } +static irqreturn_t renesas_usb3_otg_irq(int irq, void *_usb3) +{ + struct renesas_usb3 *usb3 = _usb3; + + usb3_irq_otg_int(usb3); + + return IRQ_HANDLED; +} + static void usb3_write_pn_mod(struct renesas_usb3_ep *usb3_ep, const struct usb_endpoint_descriptor *desc) { @@ -2571,6 +2599,8 @@ static int renesas_usb3_remove(struct platform_device *pdev) usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); renesas_usb3_dma_free_prd(usb3, &pdev->dev); __renesas_usb3_ep_free_request(usb3->ep0_req); @@ -2589,8 +2619,8 @@ static int renesas_usb3_init_ep(struct renesas_usb3 *usb3, struct device *dev, usb3->num_usb3_eps = priv->ramsize_per_ramif * priv->num_ramif * 2 / priv->ramsize_per_pipe + 1; - if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES) - usb3->num_usb3_eps = USB3_MAX_NUM_PIPES; + if (usb3->num_usb3_eps > USB3_MAX_NUM_PIPES(usb3)) + usb3->num_usb3_eps = USB3_MAX_NUM_PIPES(usb3); usb3->usb3_ep = devm_kcalloc(dev, usb3->num_usb3_eps, sizeof(*usb3_ep), @@ -2707,6 +2737,13 @@ static const struct renesas_usb3_priv renesas_usb3_priv_r8a77990 = { .workaround_for_vbus = true, }; +static const struct renesas_usb3_priv renesas_usb3_priv_rzv2m = { + .ramsize_per_ramif = SZ_16K, + .num_ramif = 1, + .ramsize_per_pipe = SZ_4K, + .is_rzv2m = true, +}; + static const struct of_device_id usb3_of_match[] = { { .compatible = "renesas,r8a774c0-usb3-peri", @@ -2718,6 +2755,9 @@ static const struct of_device_id usb3_of_match[] = { .compatible = "renesas,r8a77990-usb3-peri", .data = &renesas_usb3_priv_r8a77990, }, { + .compatible = "renesas,rzv2m-usb3-peri", + .data = &renesas_usb3_priv_rzv2m, + }, { .compatible = "renesas,rcar-gen3-usb3-peri", .data = &renesas_usb3_priv_gen3, }, @@ -2748,7 +2788,7 @@ static struct usb_role_switch_desc renesas_usb3_role_switch_desc = { static int renesas_usb3_probe(struct platform_device *pdev) { struct renesas_usb3 *usb3; - int irq, ret; + int irq, drd_irq, ret; const struct renesas_usb3_priv *priv; const struct soc_device_attribute *attr; @@ -2762,10 +2802,18 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (irq < 0) return irq; + if (priv->is_rzv2m) { + drd_irq = platform_get_irq_byname(pdev, "drd"); + if (drd_irq < 0) + return drd_irq; + } + usb3 = devm_kzalloc(&pdev->dev, sizeof(*usb3), GFP_KERNEL); if (!usb3) return -ENOMEM; + usb3->is_rzv2m = priv->is_rzv2m; + usb3->reg = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(usb3->reg)) return PTR_ERR(usb3->reg); @@ -2787,6 +2835,14 @@ static int renesas_usb3_probe(struct platform_device *pdev) if (ret < 0) return ret; + if (usb3->is_rzv2m) { + ret = devm_request_irq(&pdev->dev, drd_irq, + renesas_usb3_otg_irq, 0, + dev_name(&pdev->dev), usb3); + if (ret < 0) + return ret; + } + INIT_WORK(&usb3->extcon_work, renesas_usb3_extcon_work); usb3->extcon = devm_extcon_dev_allocate(&pdev->dev, renesas_usb3_cable); if (IS_ERR(usb3->extcon)) @@ -2817,10 +2873,27 @@ static int renesas_usb3_probe(struct platform_device *pdev) goto err_add_udc; } + usb3->drd_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "drd_reset"); + if (IS_ERR(usb3->drd_rstc)) { + ret = PTR_ERR(usb3->drd_rstc); + goto err_add_udc; + } + + usb3->usbp_rstc = devm_reset_control_get_optional_shared(&pdev->dev, + "aresetn_p"); + if (IS_ERR(usb3->usbp_rstc)) { + ret = PTR_ERR(usb3->usbp_rstc); + goto err_add_udc; + } + + reset_control_deassert(usb3->drd_rstc); + reset_control_deassert(usb3->usbp_rstc); + pm_runtime_enable(&pdev->dev); ret = usb_add_gadget_udc(&pdev->dev, &usb3->gadget); if (ret < 0) - goto err_add_udc; + goto err_reset; ret = device_create_file(&pdev->dev, &dev_attr_role); if (ret < 0) @@ -2858,6 +2931,10 @@ static int renesas_usb3_probe(struct platform_device *pdev) err_dev_create: usb_del_gadget_udc(&usb3->gadget); +err_reset: + reset_control_assert(usb3->usbp_rstc); + reset_control_assert(usb3->drd_rstc); + err_add_udc: renesas_usb3_dma_free_prd(usb3, &pdev->dev); diff --git a/drivers/usb/gadget/udc/s3c2410_udc.c b/drivers/usb/gadget/udc/s3c2410_udc.c index c6625aeb7bca..8c57b191e52b 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.c +++ b/drivers/usb/gadget/udc/s3c2410_udc.c @@ -23,7 +23,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/prefetch.h> #include <linux/io.h> @@ -1419,8 +1419,7 @@ static int s3c2410_udc_set_pullup(struct s3c2410_udc *udc, int is_on) { dprintk(DEBUG_NORMAL, "%s()\n", __func__); - if (udc_info && (udc_info->udc_command || - gpio_is_valid(udc_info->pullup_pin))) { + if (udc_info && (udc_info->udc_command || udc->pullup_gpiod)) { if (is_on) s3c2410_udc_enable(udc); @@ -1467,9 +1466,7 @@ static irqreturn_t s3c2410_udc_vbus_irq(int irq, void *_dev) dprintk(DEBUG_NORMAL, "%s()\n", __func__); - value = gpio_get_value(udc_info->vbus_pin) ? 1 : 0; - if (udc_info->vbus_pin_inverted) - value = !value; + value = gpiod_get_value(dev->vbus_gpiod); if (value != dev->vbus) s3c2410_udc_vbus_session(&dev->gadget, value); @@ -1504,14 +1501,15 @@ static const struct usb_gadget_ops s3c2410_ops = { .udc_stop = s3c2410_udc_stop, }; -static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) +static void s3c2410_udc_command(struct s3c2410_udc *udc, + enum s3c2410_udc_cmd_e cmd) { if (!udc_info) return; if (udc_info->udc_command) { udc_info->udc_command(cmd); - } else if (gpio_is_valid(udc_info->pullup_pin)) { + } else if (udc->pullup_gpiod) { int value; switch (cmd) { @@ -1524,9 +1522,8 @@ static void s3c2410_udc_command(enum s3c2410_udc_cmd_e cmd) default: return; } - value ^= udc_info->pullup_pin_inverted; - gpio_set_value(udc_info->pullup_pin, value); + gpiod_set_value(udc->pullup_gpiod, value); } } @@ -1551,7 +1548,7 @@ static void s3c2410_udc_disable(struct s3c2410_udc *dev) udc_write(0x1F, S3C2410_UDC_EP_INT_REG); /* Good bye, cruel world */ - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_DISABLE); /* Set speed to unknown */ dev->gadget.speed = USB_SPEED_UNKNOWN; @@ -1613,7 +1610,7 @@ static void s3c2410_udc_enable(struct s3c2410_udc *dev) udc_write(S3C2410_UDC_INT_EP0, S3C2410_UDC_EP_INT_EN_REG); /* time to say "hello, world" */ - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + s3c2410_udc_command(dev, S3C2410_UDC_P_ENABLE); } static int s3c2410_udc_start(struct usb_gadget *g, @@ -1802,14 +1799,15 @@ static int s3c2410_udc_probe(struct platform_device *pdev) dev_dbg(dev, "got irq %i\n", irq_usbd); - if (udc_info && udc_info->vbus_pin > 0) { - retval = gpio_request(udc_info->vbus_pin, "udc vbus"); - if (retval < 0) { - dev_err(dev, "cannot claim vbus pin\n"); - goto err_int; - } + udc->vbus_gpiod = gpiod_get_optional(dev, "vbus", GPIOD_IN); + if (IS_ERR(udc->vbus_gpiod)) { + retval = PTR_ERR(udc->vbus_gpiod); + goto err_int; + } + if (udc->vbus_gpiod) { + gpiod_set_consumer_name(udc->vbus_gpiod, "udc vbus"); - irq = gpio_to_irq(udc_info->vbus_pin); + irq = gpiod_to_irq(udc->vbus_gpiod); if (irq < 0) { dev_err(dev, "no irq for gpio vbus pin\n"); retval = irq; @@ -1833,16 +1831,12 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->vbus = 1; } - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) { - - retval = gpio_request_one(udc_info->pullup_pin, - udc_info->vbus_pin_inverted ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - "udc pullup"); - if (retval) - goto err_vbus_irq; + udc->pullup_gpiod = gpiod_get_optional(dev, "pullup", GPIOD_OUT_LOW); + if (IS_ERR(udc->pullup_gpiod)) { + retval = PTR_ERR(udc->pullup_gpiod); + goto err_vbus_irq; } + gpiod_set_consumer_name(udc->pullup_gpiod, "udc pullup"); retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget); if (retval) @@ -1856,15 +1850,10 @@ static int s3c2410_udc_probe(struct platform_device *pdev) return 0; err_add_udc: - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); err_vbus_irq: - if (udc_info && udc_info->vbus_pin > 0) - free_irq(gpio_to_irq(udc_info->vbus_pin), udc); + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); err_gpio_claim: - if (udc_info && udc_info->vbus_pin > 0) - gpio_free(udc_info->vbus_pin); err_int: free_irq(irq_usbd, udc); err_udc_clk: @@ -1885,7 +1874,6 @@ err_usb_bus_clk: static int s3c2410_udc_remove(struct platform_device *pdev) { struct s3c2410_udc *udc = platform_get_drvdata(pdev); - unsigned int irq; dev_dbg(&pdev->dev, "%s()\n", __func__); @@ -1895,14 +1883,8 @@ static int s3c2410_udc_remove(struct platform_device *pdev) usb_del_gadget_udc(&udc->gadget); debugfs_remove(debugfs_lookup("registers", s3c2410_udc_debugfs_root)); - if (udc_info && !udc_info->udc_command && - gpio_is_valid(udc_info->pullup_pin)) - gpio_free(udc_info->pullup_pin); - - if (udc_info && udc_info->vbus_pin > 0) { - irq = gpio_to_irq(udc_info->vbus_pin); - free_irq(irq, udc); - } + if (udc->vbus_gpiod) + free_irq(gpiod_to_irq(udc->vbus_gpiod), udc); free_irq(irq_usbd, udc); @@ -1926,14 +1908,18 @@ static int s3c2410_udc_remove(struct platform_device *pdev) static int s3c2410_udc_suspend(struct platform_device *pdev, pm_message_t message) { - s3c2410_udc_command(S3C2410_UDC_P_DISABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_DISABLE); return 0; } static int s3c2410_udc_resume(struct platform_device *pdev) { - s3c2410_udc_command(S3C2410_UDC_P_ENABLE); + struct s3c2410_udc *udc = platform_get_drvdata(pdev); + + s3c2410_udc_command(udc, S3C2410_UDC_P_ENABLE); return 0; } diff --git a/drivers/usb/gadget/udc/s3c2410_udc.h b/drivers/usb/gadget/udc/s3c2410_udc.h index 135a5bff3c74..cdbf202e5ee8 100644 --- a/drivers/usb/gadget/udc/s3c2410_udc.h +++ b/drivers/usb/gadget/udc/s3c2410_udc.h @@ -83,6 +83,9 @@ struct s3c2410_udc { u32 port_status; int ep0state; + struct gpio_desc *vbus_gpiod; + struct gpio_desc *pullup_gpiod; + unsigned got_irq : 1; unsigned req_std : 1; diff --git a/drivers/usb/gadget/udc/tegra-xudc.c b/drivers/usb/gadget/udc/tegra-xudc.c index 3c37effdfa64..76919d7570d2 100644 --- a/drivers/usb/gadget/udc/tegra-xudc.c +++ b/drivers/usb/gadget/udc/tegra-xudc.c @@ -2,7 +2,7 @@ /* * NVIDIA Tegra XUSB device mode controller * - * Copyright (c) 2013-2019, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2013-2022, NVIDIA CORPORATION. All rights reserved. * Copyright (c) 2015, Google Inc. */ @@ -702,6 +702,8 @@ static void tegra_xudc_device_mode_on(struct tegra_xudc *xudc) pm_runtime_get_sync(xudc->dev); + tegra_phy_xusb_utmi_pad_power_on(xudc->curr_utmi_phy); + err = phy_power_on(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI power on failed: %d\n", err); @@ -756,6 +758,8 @@ static void tegra_xudc_device_mode_off(struct tegra_xudc *xudc) /* Make sure interrupt handler has completed before powergating. */ synchronize_irq(xudc->irq); + tegra_phy_xusb_utmi_pad_power_down(xudc->curr_utmi_phy); + err = phy_power_off(xudc->curr_utmi_phy); if (err < 0) dev_err(xudc->dev, "UTMI PHY power off failed: %d\n", err); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index fd9264cf6c87..247568bc17a2 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -205,12 +205,12 @@ config USB_EHCI_FSL Variation of ARC USB block used in some Freescale chips. config USB_EHCI_HCD_NPCM7XX - tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller" - depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST - default y if (USB_EHCI_HCD && ARCH_NPCM7XX) + tristate "Support for Nuvoton NPCM on-chip EHCI USB controller" + depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST + default y if (USB_EHCI_HCD && ARCH_NPCM) help Enables support for the on-chip EHCI controller on - Nuvoton NPCM7XX chips. + Nuvoton NPCM chips. config USB_EHCI_HCD_OMAP tristate "EHCI support for OMAP3 and later chips" diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 05d41fd65f25..8b775e7bab06 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -25,8 +25,6 @@ #define DRIVER_DESC "EHCI Atmel driver" -static const char hcd_name[] = "ehci-atmel"; - #define EHCI_INSNREG(index) ((index) * 4 + 0x90) #define EHCI_INSNREG08_HSIC_EN BIT(2) @@ -239,7 +237,6 @@ static int __init ehci_atmel_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&ehci_atmel_hc_driver, &ehci_atmel_drv_overrides); return platform_driver_register(&ehci_atmel_driver); } diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 1a9b7572e17f..c8e152c2e0ce 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -32,7 +32,6 @@ (EHCI_INSNREG00_ENA_INCR16 | EHCI_INSNREG00_ENA_INCR8 | \ EHCI_INSNREG00_ENA_INCR4 | EHCI_INSNREG00_ENA_INCRX_ALIGN) -static const char hcd_name[] = "ehci-exynos"; static struct hc_driver __read_mostly exynos_ehci_hc_driver; #define PHY_NUMBER 3 @@ -347,7 +346,6 @@ static int __init ehci_exynos_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ehci_init_driver(&exynos_ehci_hc_driver, &exynos_overrides); return platform_driver_register(&exynos_ehci_driver); } diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 896c0d107f72..9cea785934e5 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -722,8 +722,6 @@ static int __init ehci_fsl_init(void) if (usb_disabled()) return -ENODEV; - pr_info(DRV_NAME ": " DRIVER_DESC "\n"); - ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides); fsl_ehci_hc_driver.product_desc = diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 684164fa9716..a1930db0da1c 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1351,7 +1351,6 @@ static int __init ehci_hcd_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); set_bit(USB_EHCI_LOADED, &usb_hcds_loaded); if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) || test_bit(USB_OHCI_LOADED, &usb_hcds_loaded)) diff --git a/drivers/usb/host/ehci-npcm7xx.c b/drivers/usb/host/ehci-npcm7xx.c index 6b5a7a873e01..63af1a827fcb 100644 --- a/drivers/usb/host/ehci-npcm7xx.c +++ b/drivers/usb/host/ehci-npcm7xx.c @@ -22,19 +22,8 @@ #include "ehci.h" -#include <linux/regmap.h> -#include <linux/mfd/syscon.h> - #define DRIVER_DESC "EHCI npcm7xx driver" -static const char hcd_name[] = "npcm7xx-ehci"; - -#define USB2PHYCTL_OFFSET 0x144 - -#define IPSRST2_OFFSET 0x24 -#define IPSRST3_OFFSET 0x34 - - static struct hc_driver __read_mostly ehci_npcm7xx_hc_driver; static int __maybe_unused ehci_npcm7xx_drv_suspend(struct device *dev) @@ -60,52 +49,12 @@ static int npcm7xx_ehci_hcd_drv_probe(struct platform_device *pdev) { struct usb_hcd *hcd; struct resource *res; - struct regmap *gcr_regmap; - struct regmap *rst_regmap; const struct hc_driver *driver = &ehci_npcm7xx_hc_driver; int irq; int retval; dev_dbg(&pdev->dev, "initializing npcm7xx ehci USB Controller\n"); - gcr_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-gcr"); - if (IS_ERR(gcr_regmap)) { - dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-gcr\n", - __func__); - return PTR_ERR(gcr_regmap); - } - - rst_regmap = syscon_regmap_lookup_by_compatible("nuvoton,npcm750-rst"); - if (IS_ERR(rst_regmap)) { - dev_err(&pdev->dev, "%s: failed to find nuvoton,npcm750-rst\n", - __func__); - return PTR_ERR(rst_regmap); - } - - /********* phy init ******/ - // reset usb host - regmap_update_bits(rst_regmap, IPSRST2_OFFSET, - (0x1 << 26), (0x1 << 26)); - regmap_update_bits(rst_regmap, IPSRST3_OFFSET, - (0x1 << 25), (0x1 << 25)); - regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET, - (0x1 << 28), 0); - - udelay(1); - - // enable phy - regmap_update_bits(rst_regmap, IPSRST3_OFFSET, - (0x1 << 25), 0); - - udelay(50); // enable phy - - regmap_update_bits(gcr_regmap, USB2PHYCTL_OFFSET, - (0x1 << 28), (0x1 << 28)); - - // enable host - regmap_update_bits(rst_regmap, IPSRST2_OFFSET, - (0x1 << 26), 0); - if (usb_disabled()) return -ENODEV; @@ -191,8 +140,6 @@ static int __init ehci_npcm7xx_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_npcm7xx_hc_driver, NULL); return platform_driver_register(&npcm7xx_ehci_hcd_driver); } diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 8c45bc17a580..7dd984722a7f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -284,8 +284,6 @@ static int __init ehci_omap_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_omap_hc_driver, &ehci_omap_overrides); return platform_driver_register(&ehci_hcd_omap_driver); } diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 3626758b3e2a..a3454a3ea4e0 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -65,8 +65,6 @@ struct orion_ehci_hcd { struct phy *phy; }; -static const char hcd_name[] = "ehci-orion"; - static struct hc_driver __read_mostly ehci_orion_hc_driver; /* @@ -361,8 +359,6 @@ static int __init ehci_orion_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides); return platform_driver_register(&ehci_orion_driver); } diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9937c5a7efc2..17f8b6ea0c35 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -382,7 +382,7 @@ static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { if (is_bypassed_id(pdev)) return -ENODEV; - return usb_hcd_pci_probe(pdev, id, &ehci_pci_hc_driver); + return usb_hcd_pci_probe(pdev, &ehci_pci_hc_driver); } static void ehci_pci_remove(struct pci_dev *pdev) @@ -423,8 +423,6 @@ static int __init ehci_pci_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); /* Entries for the PCI suspend/resume callbacks are special */ diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 6924f0316e9a..fe497c876d76 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -53,8 +53,6 @@ struct ehci_platform_priv { struct delayed_work poll_work; }; -static const char hcd_name[] = "ehci-platform"; - static int ehci_platform_reset(struct usb_hcd *hcd) { struct platform_device *pdev = to_platform_device(hcd->self.controller); @@ -529,8 +527,6 @@ static int __init ehci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ehci_platform_driver); } diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 807e64991e3e..666f5c4db25a 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -645,7 +645,7 @@ qh_urb_transaction ( token |= (1 /* "in" */ << 8); /* else it's already initted to "out" pid (0 << 8) */ - maxpacket = usb_maxpacket(urb->dev, urb->pipe); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); /* * buffer gets wrapped in one or more qtds; @@ -1218,7 +1218,7 @@ static int ehci_submit_single_step_set_feature( token |= (1 /* "in" */ << 8); /*This is IN stage*/ - maxpacket = usb_maxpacket(urb->dev, urb->pipe); + maxpacket = usb_endpoint_maxp(&urb->ep->desc); qtd_fill(ehci, qtd, buf, len, token, maxpacket); diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 3694e450a11a..c4ddd1022f60 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -24,8 +24,6 @@ #define DRIVER_DESC "EHCI SPEAr driver" -static const char hcd_name[] = "SPEAr-ehci"; - struct spear_ehci { struct clk *clk; }; @@ -167,8 +165,6 @@ static int __init ehci_spear_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides); return platform_driver_register(&spear_ehci_hcd_driver); } diff --git a/drivers/usb/host/ehci-st.c b/drivers/usb/host/ehci-st.c index f74433aac948..f731dc98c533 100644 --- a/drivers/usb/host/ehci-st.c +++ b/drivers/usb/host/ehci-st.c @@ -42,8 +42,6 @@ struct st_ehci_platform_priv { #define hcd_to_ehci_priv(h) \ ((struct st_ehci_platform_priv *)hcd_to_ehci(h)->priv) -static const char hcd_name[] = "ehci-st"; - #define EHCI_CAPS_SIZE 0x10 #define AHB2STBUS_INSREG01 (EHCI_CAPS_SIZE + 0x84) @@ -346,8 +344,6 @@ static int __init ehci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ehci_init_driver(&ehci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ehci_platform_driver); } diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 2ba09c3fbc2f..95a44462bed0 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -25,8 +25,8 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> -#include <linux/of_gpio.h> #include <linux/slab.h> +#include <linux/gpio/consumer.h> #include <soc/fsl/qe/qe.h> #include <asm/fsl_gtm.h> #include "fhci.h" @@ -150,15 +150,15 @@ int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) u8 bits = 0; /* check USBOE,if transmitting,exit */ - if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + if (!gpiod_get_value(fhci->gpiods[GPIO_USBOE])) return -1; /* check USBRP */ - if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + if (gpiod_get_value(fhci->gpiods[GPIO_USBRP])) bits |= 0x2; /* check USBRN */ - if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + if (gpiod_get_value(fhci->gpiods[GPIO_USBRN])) bits |= 0x1; return bits; @@ -630,40 +630,23 @@ static int of_fhci_probe(struct platform_device *ofdev) /* GPIOs and pins */ for (i = 0; i < NUM_GPIOS; i++) { - int gpio; - enum of_gpio_flags flags; - - gpio = of_get_gpio_flags(node, i, &flags); - fhci->gpios[i] = gpio; - fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; - - if (!gpio_is_valid(gpio)) { - if (i < GPIO_SPEED) { - dev_err(dev, "incorrect GPIO%d: %d\n", - i, gpio); - goto err_gpios; - } else { - dev_info(dev, "assuming board doesn't have " - "%s gpio\n", i == GPIO_SPEED ? - "speed" : "power"); - continue; - } - } + if (i < GPIO_SPEED) + fhci->gpiods[i] = devm_gpiod_get_index(dev, + NULL, i, GPIOD_IN); + + else + fhci->gpiods[i] = devm_gpiod_get_index_optional(dev, + NULL, i, GPIOD_OUT_LOW); - ret = gpio_request(gpio, dev_name(dev)); - if (ret) { - dev_err(dev, "failed to request gpio %d", i); + if (IS_ERR(fhci->gpiods[i])) { + dev_err(dev, "incorrect GPIO%d: %ld\n", + i, PTR_ERR(fhci->gpiods[i])); goto err_gpios; } - - if (i >= GPIO_SPEED) { - ret = gpio_direction_output(gpio, 0); - if (ret) { - dev_err(dev, "failed to set gpio %d as " - "an output\n", i); - i++; - goto err_gpios; - } + if (!fhci->gpiods[i]) { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); } } @@ -766,10 +749,6 @@ err_pins: while (--j >= 0) qe_pin_free(fhci->pins[j]); err_gpios: - while (--i >= 0) { - if (gpio_is_valid(fhci->gpios[i])) - gpio_free(fhci->gpios[i]); - } cpm_muram_free(pram_addr); err_pram: iounmap(hcd->regs); @@ -782,18 +761,12 @@ static int fhci_remove(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct fhci_hcd *fhci = hcd_to_fhci(hcd); - int i; int j; usb_remove_hcd(hcd); free_irq(fhci->timer->irq, hcd); gtm_put_timer16(fhci->timer); cpm_muram_free(cpm_muram_offset(fhci->pram)); - for (i = 0; i < NUM_GPIOS; i++) { - if (!gpio_is_valid(fhci->gpios[i])) - continue; - gpio_free(fhci->gpios[i]); - } for (j = 0; j < NUM_PINS; j++) qe_pin_free(fhci->pins[j]); fhci_dfs_destroy(fhci); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c index c359dcdb9b13..5f48660ebdfa 100644 --- a/drivers/usb/host/fhci-hub.c +++ b/drivers/usb/host/fhci-hub.c @@ -19,7 +19,7 @@ #include <linux/io.h> #include <linux/usb.h> #include <linux/usb/hcd.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <soc/fsl/qe/qe.h> #include "fhci.h" @@ -38,13 +38,12 @@ static u8 root_hub_des[] = { static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) { - int gpio = fhci->gpios[gpio_nr]; - bool alow = fhci->alow_gpios[gpio_nr]; + struct gpio_desc *gpiod = fhci->gpiods[gpio_nr]; - if (!gpio_is_valid(gpio)) + if (!gpiod) return; - gpio_set_value(gpio, on ^ alow); + gpiod_set_value(gpiod, on); mdelay(5); } @@ -129,9 +128,9 @@ void fhci_io_port_generate_reset(struct fhci_hcd *fhci) { fhci_dbg(fhci, "-> %s\n", __func__); - gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); - gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); - gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBOE], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBTP], 0); + gpiod_direction_output(fhci->gpiods[GPIO_USBTN], 0); mdelay(5); diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h index 81fbc019a9b3..1f57b0989485 100644 --- a/drivers/usb/host/fhci.h +++ b/drivers/usb/host/fhci.h @@ -23,6 +23,7 @@ #include <linux/io.h> #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/gpio/consumer.h> #include <soc/fsl/qe/qe.h> #include <soc/fsl/qe/immap_qe.h> @@ -242,8 +243,7 @@ struct fhci_hcd { enum qe_clock fullspeed_clk; enum qe_clock lowspeed_clk; struct qe_pin *pins[NUM_PINS]; - int gpios[NUM_GPIOS]; - bool alow_gpios[NUM_GPIOS]; + struct gpio_desc *gpiods[NUM_GPIOS]; struct qe_usb_ctlr __iomem *regs; /* I/O memory used to communicate */ struct fhci_pram __iomem *pram; /* Parameter RAM */ diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c index f8c111e08a0d..3d1dbcf4c073 100644 --- a/drivers/usb/host/fotg210-hcd.c +++ b/drivers/usb/host/fotg210-hcd.c @@ -5692,7 +5692,6 @@ static int __init fotg210_hcd_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); set_bit(USB_EHCI_LOADED, &usb_hcds_loaded); if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) || test_bit(USB_OHCI_LOADED, &usb_hcds_loaded)) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 98326465e2dc..533537ef3c21 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -62,8 +62,6 @@ struct ohci_at91_priv { #define DRIVER_DESC "OHCI Atmel driver" -static const char hcd_name[] = "ohci-atmel"; - static struct hc_driver __read_mostly ohci_at91_hc_driver; static const struct ohci_driver_overrides ohci_at91_drv_overrides __initconst = { @@ -699,7 +697,6 @@ static int __init ohci_at91_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&ohci_at91_hc_driver, &ohci_at91_drv_overrides); /* diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index 1371b0c249ec..d4818e8d652b 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -551,7 +551,6 @@ static int __init ohci_da8xx_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", DRV_NAME); ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides); /* diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index 5f5e8a64c8e2..8d7977fd5d3b 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -21,7 +21,6 @@ #define DRIVER_DESC "OHCI Exynos driver" -static const char hcd_name[] = "ohci-exynos"; static struct hc_driver __read_mostly exynos_ohci_hc_driver; #define to_exynos_ohci(hcd) (struct exynos_ohci_hcd *)(hcd_to_ohci(hcd)->priv) @@ -310,7 +309,6 @@ static int __init ohci_exynos_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&exynos_ohci_hc_driver, &exynos_overrides); return platform_driver_register(&exynos_ohci_driver); } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index c4c821c2288c..0457dd9f6c19 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1276,7 +1276,6 @@ static int __init ohci_hcd_mod_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name); pr_debug ("%s: block sizes: ed %zd td %zd\n", hcd_name, sizeof (struct ed), sizeof (struct td)); set_bit(USB_OHCI_LOADED, &usb_hcds_loaded); diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c index 106a6bcefb08..5b32e683e367 100644 --- a/drivers/usb/host/ohci-nxp.c +++ b/drivers/usb/host/ohci-nxp.c @@ -275,8 +275,6 @@ static int __init ohci_nxp_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_nxp_hc_driver, NULL); return platform_driver_register(&ohci_hcd_nxp_driver); } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index f5bc9c8bdc9a..cb29701df911 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -423,8 +423,6 @@ static int __init ohci_omap_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_omap_hc_driver, &omap_overrides); return platform_driver_register(&ohci_hcd_omap_driver); } diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 41efe927d8f3..d7b4f40f9ff4 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -282,7 +282,7 @@ MODULE_DEVICE_TABLE (pci, pci_ids); static int ohci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - return usb_hcd_pci_probe(dev, id, &ohci_pci_hc_driver); + return usb_hcd_pci_probe(dev, &ohci_pci_hc_driver); } /* pci driver glue; this is a "new style" PCI driver module */ @@ -306,8 +306,6 @@ static int __init ohci_pci_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_pci_hc_driver, &pci_overrides); #ifdef CONFIG_PM diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 0adae6265127..a84305091c43 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -41,8 +41,6 @@ struct ohci_platform_priv { struct reset_control *resets; }; -static const char hcd_name[] = "ohci-platform"; - static int ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -289,7 +287,7 @@ static int ohci_platform_suspend(struct device *dev) return ret; } -static int ohci_platform_resume(struct device *dev) +static int ohci_platform_resume_common(struct device *dev, bool hibernated) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev_get_platdata(dev); @@ -301,7 +299,7 @@ static int ohci_platform_resume(struct device *dev) return err; } - ohci_resume(hcd, false); + ohci_resume(hcd, hibernated); pm_runtime_disable(dev); pm_runtime_set_active(dev); @@ -309,6 +307,16 @@ static int ohci_platform_resume(struct device *dev) return 0; } + +static int ohci_platform_resume(struct device *dev) +{ + return ohci_platform_resume_common(dev, false); +} + +static int ohci_platform_restore(struct device *dev) +{ + return ohci_platform_resume_common(dev, true); +} #endif /* CONFIG_PM_SLEEP */ static const struct of_device_id ohci_platform_ids[] = { @@ -325,8 +333,16 @@ static const struct platform_device_id ohci_platform_table[] = { }; MODULE_DEVICE_TABLE(platform, ohci_platform_table); -static SIMPLE_DEV_PM_OPS(ohci_platform_pm_ops, ohci_platform_suspend, - ohci_platform_resume); +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops ohci_platform_pm_ops = { + .suspend = ohci_platform_suspend, + .resume = ohci_platform_resume, + .freeze = ohci_platform_suspend, + .thaw = ohci_platform_resume, + .poweroff = ohci_platform_suspend, + .restore = ohci_platform_restore, +}; +#endif static struct platform_driver ohci_platform_driver = { .id_table = ohci_platform_table, @@ -335,7 +351,9 @@ static struct platform_driver ohci_platform_driver = { .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ohci-platform", +#ifdef CONFIG_PM_SLEEP .pm = &ohci_platform_pm_ops, +#endif .of_match_table = ohci_platform_ids, .probe_type = PROBE_PREFER_ASYNCHRONOUS, } @@ -346,8 +364,6 @@ static int __init ohci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ohci_platform_driver); } diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index ab4f610a0140..a1dad8745622 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -114,8 +114,6 @@ #define PXA_UHC_MAX_PORTNUM 3 -static const char hcd_name[] = "ohci-pxa27x"; - static struct hc_driver __read_mostly ohci_pxa27x_hc_driver; struct pxa27x_ohci { @@ -608,8 +606,6 @@ static int __init ohci_pxa27x_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_pxa27x_hc_driver, &pxa27x_overrides); ohci_pxa27x_hc_driver.hub_control = pxa27x_ohci_hub_control; diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 12264c048601..85a0a9ae0095 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -39,8 +39,6 @@ #define DRIVER_DESC "OHCI S3C2410 driver" -static const char hcd_name[] = "ohci-s3c2410"; - static struct clk *clk; static struct clk *usb_clk; @@ -474,7 +472,6 @@ static int __init ohci_s3c2410_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); ohci_init_driver(&ohci_s3c2410_hc_driver, NULL); /* diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 9b81f420656d..196951a27f3f 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -23,7 +23,6 @@ #define DRIVER_DESC "OHCI SPEAr driver" -static const char hcd_name[] = "SPEAr-ohci"; struct spear_ohci { struct clk *clk; }; @@ -179,8 +178,6 @@ static int __init ohci_spear_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_spear_hc_driver, &spear_overrides); return platform_driver_register(&spear_ohci_hcd_driver); } diff --git a/drivers/usb/host/ohci-st.c b/drivers/usb/host/ohci-st.c index ac796ccd93ef..82eef3c62e11 100644 --- a/drivers/usb/host/ohci-st.c +++ b/drivers/usb/host/ohci-st.c @@ -40,8 +40,6 @@ struct st_ohci_platform_priv { #define hcd_to_ohci_priv(h) \ ((struct st_ohci_platform_priv *)hcd_to_ohci(h)->priv) -static const char hcd_name[] = "ohci-st"; - static int st_ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -324,8 +322,6 @@ static int __init ohci_platform_init(void) if (usb_disabled()) return -ENODEV; - pr_info("%s: " DRIVER_DESC "\n", hcd_name); - ohci_init_driver(&ohci_platform_hc_driver, &platform_overrides); return platform_driver_register(&ohci_platform_driver); } diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index d879d6af5710..95240c9c45bd 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -3190,7 +3190,6 @@ static int __init u132_hcd_init(void) u132_exiting = 0; if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "driver %s\n", hcd_name); workqueue = create_singlethread_workqueue("u132"); if (!workqueue) return -ENOMEM; diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index d90b869f5f40..c22b51af83fc 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -867,8 +867,6 @@ static int __init uhci_hcd_init(void) if (usb_disabled()) return -ENODEV; - printk(KERN_INFO "uhci_hcd: " DRIVER_DESC "%s\n", - ignore_oc ? ", overcurrent ignored" : ""); set_bit(USB_UHCI_LOADED, &usb_hcds_loaded); #ifdef CONFIG_DYNAMIC_DEBUG diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 9b88745d247f..3592f757fe05 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -294,7 +294,7 @@ MODULE_DEVICE_TABLE(pci, uhci_pci_ids); static int uhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) { - return usb_hcd_pci_probe(dev, id, &uhci_driver); + return usb_hcd_pci_probe(dev, &uhci_driver); } static struct pci_driver uhci_pci_driver = { diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index e61155fa6379..f1367b53b260 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -988,7 +988,7 @@ xhci_alloc_dbc(struct device *dev, void __iomem *base, const struct dbc_driver * dbc->driver = driver; if (readl(&dbc->regs->control) & DBC_CTRL_DBC_ENABLE) - return NULL; + goto err; INIT_DELAYED_WORK(&dbc->event_work, xhci_dbc_handle_events); spin_lock_init(&dbc->lock); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8c19e151a945..9e56aa28efcd 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -641,7 +641,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, num_stream_ctxs, &stream_info->ctx_array_dma, mem_flags); if (!stream_info->stream_ctx_array) - goto cleanup_ctx; + goto cleanup_ring_array; memset(stream_info->stream_ctx_array, 0, sizeof(struct xhci_stream_ctx)*num_stream_ctxs); @@ -702,6 +702,11 @@ cleanup_rings: } xhci_free_command(xhci, stream_info->free_streams_command); cleanup_ctx: + xhci_free_stream_ctx(xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); +cleanup_ring_array: kfree(stream_info->stream_rings); cleanup_info: kfree(stream_info); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index dce6c0ec8d34..40228a3d77a0 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -431,7 +431,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) * to say USB 2.0, but I'm not sure what the implications would be in * the other parts of the HCD code. */ - retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver); + retval = usb_hcd_pci_probe(dev, &xhci_pci_hc_driver); if (retval) goto put_runtime_pm; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index a8641b6536ee..5fb55bf19493 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -123,7 +123,7 @@ static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = { }; static const struct xhci_plat_priv xhci_plat_brcm = { - .quirks = XHCI_RESET_ON_RESUME, + .quirks = XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS, }; static const struct of_device_id usb_xhci_of_match[] = { @@ -437,7 +437,16 @@ static int __maybe_unused xhci_plat_suspend(struct device *dev) * xhci_suspend() needs `do_wakeup` to know whether host is allowed * to do wakeup during suspend. */ - return xhci_suspend(xhci, device_may_wakeup(dev)); + ret = xhci_suspend(xhci, device_may_wakeup(dev)); + if (ret) + return ret; + + if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { + clk_disable_unprepare(xhci->clk); + clk_disable_unprepare(xhci->reg_clk); + } + + return 0; } static int __maybe_unused xhci_plat_resume(struct device *dev) @@ -446,6 +455,11 @@ static int __maybe_unused xhci_plat_resume(struct device *dev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int ret; + if (!device_may_wakeup(dev) && (xhci->quirks & XHCI_SUSPEND_RESUME_CLKS)) { + clk_prepare_enable(xhci->clk); + clk_prepare_enable(xhci->reg_clk); + } + ret = xhci_priv_resume_quirk(hcd); if (ret) return ret; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 38649284ff88..5176765c4013 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -1183,7 +1183,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* re-initialize the HC on Restore Error, or Host Controller Error */ if (temp & (STS_SRE | STS_HCE)) { reinit_xhc = true; - xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); + if (!xhci->broken_suspend) + xhci_warn(xhci, "xHC error in resume, USBSTS 0x%x, Reinit\n", temp); } if (reinit_xhc) { @@ -1482,7 +1483,7 @@ EXPORT_SYMBOL_GPL(xhci_get_endpoint_index); /* The reverse operation to xhci_get_endpoint_index. Calculate the USB endpoint * address from the XHCI endpoint index. */ -unsigned int xhci_get_endpoint_address(unsigned int ep_index) +static unsigned int xhci_get_endpoint_address(unsigned int ep_index) { unsigned int number = DIV_ROUND_UP(ep_index, 2); unsigned int direction = ep_index % 2 ? USB_DIR_OUT : USB_DIR_IN; @@ -4095,7 +4096,8 @@ int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev) slot_id = command->slot_id; if (!slot_id || command->status != COMP_SUCCESS) { - xhci_err(xhci, "Error while assigning device slot ID\n"); + xhci_err(xhci, "Error while assigning device slot ID: %s\n", + xhci_trb_comp_code_string(command->status)); xhci_err(xhci, "Max number of devices this xHCI host supports is %u.\n", HCS_MAX_SLOTS( readl(&xhci->cap_regs->hcs_params1))); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7caa0db5e826..c0964fe8ac12 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1807,8 +1807,6 @@ struct xhci_hcd { struct xhci_erst erst; /* Scratchpad */ struct xhci_scratchpad *scratchpad; - /* Store LPM test failed devices' information */ - struct list_head lpm_failed_devs; /* slot enabling and address device helpers */ /* these are not thread safe so use mutex */ @@ -1827,7 +1825,6 @@ struct xhci_hcd { /* Host controller watchdog timer structures */ unsigned int xhc_state; unsigned long run_graceperiod; - u32 command; struct s3_save s3; /* Host controller is dying - not responding to commands. "I'm not dead yet!" * @@ -1899,6 +1896,7 @@ struct xhci_hcd { #define XHCI_NO_SOFT_RETRY BIT_ULL(40) #define XHCI_BROKEN_D3COLD BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) +#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) unsigned int num_active_eps; unsigned int limit_active_eps; @@ -2041,7 +2039,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); -unsigned int xhci_get_endpoint_address(unsigned int ep_index); unsigned int xhci_last_valid_endpoint(u32 added_ctxs); void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep); void xhci_update_tt_active_eps(struct xhci_hcd *xhci, diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 04c4e3fed094..87035ac09834 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -547,7 +547,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, hub->boost_up = USB251XB_DEF_BOOST_UP; cproperty_char = of_get_property(np, "manufacturer", NULL); - strlcpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, + strscpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, sizeof(str)); hub->manufacturer_len = strlen(str) & 0xFF; memset(hub->manufacturer, 0, USB251XB_STRING_BUFSIZE); @@ -557,7 +557,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "product", NULL); - strlcpy(str, cproperty_char ? : data->product_str, sizeof(str)); + strscpy(str, cproperty_char ? : data->product_str, sizeof(str)); hub->product_len = strlen(str) & 0xFF; memset(hub->product, 0, USB251XB_STRING_BUFSIZE); len = min_t(size_t, USB251XB_STRING_BUFSIZE / 2, strlen(str)); @@ -566,7 +566,7 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, USB251XB_STRING_BUFSIZE); cproperty_char = of_get_property(np, "serial", NULL); - strlcpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, + strscpy(str, cproperty_char ? : USB251XB_DEF_SERIAL_STRING, sizeof(str)); hub->serial_len = strlen(str) & 0xFF; memset(hub->serial, 0, USB251XB_STRING_BUFSIZE); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index 330f494cd158..82b620230bd9 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -160,6 +160,7 @@ static int usb3503_probe(struct usb3503 *hub) struct usb3503_platform_data *pdata = dev_get_platdata(dev); struct device_node *np = dev->of_node; int err; + bool is_clk_enabled = false; u32 mode = USB3503_MODE_HUB; const u32 *property; enum gpiod_flags flags; @@ -217,6 +218,7 @@ static int usb3503_probe(struct usb3503 *hub) return err; } + is_clk_enabled = true; property = of_get_property(np, "disabled-ports", &len); if (property && (len / sizeof(u32)) > 0) { int i; @@ -236,20 +238,26 @@ static int usb3503_probe(struct usb3503 *hub) else flags = GPIOD_OUT_HIGH; hub->intn = devm_gpiod_get_optional(dev, "intn", flags); - if (IS_ERR(hub->intn)) - return PTR_ERR(hub->intn); + if (IS_ERR(hub->intn)) { + err = PTR_ERR(hub->intn); + goto err_clk; + } if (hub->intn) gpiod_set_consumer_name(hub->intn, "usb3503 intn"); hub->connect = devm_gpiod_get_optional(dev, "connect", GPIOD_OUT_LOW); - if (IS_ERR(hub->connect)) - return PTR_ERR(hub->connect); + if (IS_ERR(hub->connect)) { + err = PTR_ERR(hub->connect); + goto err_clk; + } if (hub->connect) gpiod_set_consumer_name(hub->connect, "usb3503 connect"); hub->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); - if (IS_ERR(hub->reset)) - return PTR_ERR(hub->reset); + if (IS_ERR(hub->reset)) { + err = PTR_ERR(hub->reset); + goto err_clk; + } if (hub->reset) { /* Datasheet defines a hardware reset to be at least 100us */ usleep_range(100, 10000); @@ -265,6 +273,11 @@ static int usb3503_probe(struct usb3503 *hub) (hub->mode == USB3503_MODE_HUB) ? "hub" : "standby"); return 0; + +err_clk: + if (is_clk_enabled) + clk_disable_unprepare(hub->clk); + return err; } static int usb3503_i2c_probe(struct i2c_client *i2c, diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c index 0be8efcda15d..b00d92db5dfd 100644 --- a/drivers/usb/misc/uss720.c +++ b/drivers/usb/misc/uss720.c @@ -502,7 +502,7 @@ static size_t parport_uss720_epp_write_data(struct parport *pp, const void *buf, #else struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -563,7 +563,7 @@ static size_t parport_uss720_ecp_write_data(struct parport *pp, const void *buff { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -581,7 +581,7 @@ static size_t parport_uss720_ecp_read_data(struct parport *pp, void *buffer, siz { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) @@ -614,7 +614,7 @@ static size_t parport_uss720_write_compat(struct parport *pp, const void *buffer { struct parport_uss720_private *priv = pp->private_data; struct usb_device *usbdev = priv->usbdev; - int rlen; + int rlen = 0; int i; if (!usbdev) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index f48a23adbc35..094e812e9e69 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1268,6 +1268,11 @@ static int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma) { /* don't do anything here: "fault" will set up page table entries */ vma->vm_ops = &mon_bin_vm_ops; + + if (vma->vm_flags & VM_WRITE) + return -EPERM; + + vma->vm_flags &= ~VM_MAYWRITE; vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP; vma->vm_private_data = filp->private_data; mon_bin_vma_open(vma); diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index daada4b66a92..6704a62a1665 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -760,6 +760,9 @@ static void rxstate(struct musb *musb, struct musb_request *req) musb_writew(epio, MUSB_RXCSR, csr); buffer_aint_mapped: + fifo_count = min_t(unsigned int, + request->length - request->actual, + (unsigned int)fifo_count); musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *) (request->buf + request->actual)); request->actual += fifo_count; diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 8a262c5a0408..d2836ef5d15c 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -144,8 +144,8 @@ #define MXS_PHY_NEED_IP_FIX BIT(3) /* Minimum and maximum values for device tree entries */ -#define MXS_PHY_TX_CAL45_MIN 30 -#define MXS_PHY_TX_CAL45_MAX 55 +#define MXS_PHY_TX_CAL45_MIN 35 +#define MXS_PHY_TX_CAL45_MAX 54 #define MXS_PHY_TX_D_CAL_MIN 79 #define MXS_PHY_TX_D_CAL_MAX 119 diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c index 68cd4b68e3a2..f0240107edb1 100644 --- a/drivers/usb/phy/phy-tegra-usb.c +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -1440,16 +1440,22 @@ static int tegra_usb_phy_probe(struct platform_device *pdev) return err; } - gpiod = devm_gpiod_get_from_of_node(&pdev->dev, np, - "nvidia,phy-reset-gpio", - 0, GPIOD_OUT_HIGH, - "ulpi_phy_reset_b"); + gpiod = devm_gpiod_get(&pdev->dev, "nvidia,phy-reset", + GPIOD_OUT_HIGH); err = PTR_ERR_OR_ZERO(gpiod); if (err) { dev_err(&pdev->dev, "Request failed for reset GPIO: %d\n", err); return err; } + + err = gpiod_set_consumer_name(gpiod, "ulpi_phy_reset_b"); + if (err) { + dev_err(&pdev->dev, + "Failed to set up reset GPIO name: %d\n", err); + return err; + } + tegra_phy->reset_gpio = gpiod; phy = devm_otg_ulpi_create(&pdev->dev, diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index b97aa40ca4d1..da19a5fa414f 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -189,8 +189,8 @@ static int usb_console_setup(struct console *co, char *options) info->port = NULL; usb_autopm_put_interface(serial->interface); error_get_interface: - usb_serial_put(serial); mutex_unlock(&serial->disc_mutex); + usb_serial_put(serial); return retval; } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 52d59be92034..31b9b36f3a1c 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -47,10 +47,27 @@ #define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr, Johan Hovold <jhovold@gmail.com>" #define DRIVER_DESC "USB FTDI Serial Converters Driver" +enum ftdi_chip_type { + SIO, + FT232A, + FT232B, + FT2232C, + FT232R, + FT232H, + FT2232H, + FT4232H, + FT4232HA, + FT232HP, + FT233HP, + FT2232HP, + FT2233HP, + FT4232HP, + FT4233HP, + FTX, +}; struct ftdi_private { enum ftdi_chip_type chip_type; - /* type of device, either SIO or FT8U232AM */ int baud_base; /* baud base clock for divisor setting */ int custom_divisor; /* custom_divisor kludge, this is for baud_base (different from what goes to the @@ -62,8 +79,7 @@ struct ftdi_private { unsigned long last_dtr_rts; /* saved modem control outputs */ char prev_status; /* Used for TIOCMIWAIT */ char transmit_empty; /* If transmitter is empty or not */ - u16 interface; /* FT2232C, FT2232H or FT4232H port interface - (0 for FT232/245) */ + u16 channel; /* channel index, or 0 for legacy types */ speed_t force_baud; /* if non-zero, force the baud rate to this value */ @@ -84,8 +100,7 @@ struct ftdi_private { #endif }; -/* struct ftdi_sio_quirk is used by devices requiring special attention. */ -struct ftdi_sio_quirk { +struct ftdi_quirk { int (*probe)(struct usb_serial *); /* Special settings for probed ports. */ void (*port_probe)(struct ftdi_private *); @@ -98,27 +113,27 @@ static int ftdi_8u2232c_probe(struct usb_serial *serial); static void ftdi_USB_UIRT_setup(struct ftdi_private *priv); static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv); -static const struct ftdi_sio_quirk ftdi_jtag_quirk = { +static const struct ftdi_quirk ftdi_jtag_quirk = { .probe = ftdi_jtag_probe, }; -static const struct ftdi_sio_quirk ftdi_NDI_device_quirk = { +static const struct ftdi_quirk ftdi_NDI_device_quirk = { .probe = ftdi_NDI_device_setup, }; -static const struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = { +static const struct ftdi_quirk ftdi_USB_UIRT_quirk = { .port_probe = ftdi_USB_UIRT_setup, }; -static const struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +static const struct ftdi_quirk ftdi_HE_TIRA1_quirk = { .port_probe = ftdi_HE_TIRA1_setup, }; -static const struct ftdi_sio_quirk ftdi_stmclite_quirk = { +static const struct ftdi_quirk ftdi_stmclite_quirk = { .probe = ftdi_stmclite_probe, }; -static const struct ftdi_sio_quirk ftdi_8u2232c_quirk = { +static const struct ftdi_quirk ftdi_8u2232c_quirk = { .probe = ftdi_8u2232c_probe, }; @@ -180,6 +195,13 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_4232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_232H_PID) }, { USB_DEVICE(FTDI_VID, FTDI_FTX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT2233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT2232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT233HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT232HP_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FT4232HA_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) }, { USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) }, @@ -1061,15 +1083,22 @@ static const struct usb_device_id id_table_combined[] = { MODULE_DEVICE_TABLE(usb, id_table_combined); static const char *ftdi_chip_name[] = { - [SIO] = "SIO", /* the serial part of FT8U100AX */ - [FT8U232AM] = "FT8U232AM", - [FT232BM] = "FT232BM", - [FT2232C] = "FT2232C", - [FT232RL] = "FT232RL", - [FT2232H] = "FT2232H", - [FT4232H] = "FT4232H", - [FT232H] = "FT232H", - [FTX] = "FT-X" + [SIO] = "SIO", /* the serial part of FT8U100AX */ + [FT232A] = "FT232A", + [FT232B] = "FT232B", + [FT2232C] = "FT2232C/D", + [FT232R] = "FT232R", + [FT232H] = "FT232H", + [FT2232H] = "FT2232H", + [FT4232H] = "FT4232H", + [FT4232HA] = "FT4232HA", + [FT232HP] = "FT232HP", + [FT233HP] = "FT233HP", + [FT2232HP] = "FT2232HP", + [FT2233HP] = "FT2233HP", + [FT4232HP] = "FT4232HP", + [FT4233HP] = "FT4233HP", + [FTX] = "FT-X", }; @@ -1078,74 +1107,11 @@ static const char *ftdi_chip_name[] = { #define FTDI_STATUS_B1_MASK (FTDI_RS_BI) /* End TIOCMIWAIT */ -/* function prototypes for a FTDI serial converter */ -static int ftdi_sio_probe(struct usb_serial *serial, - const struct usb_device_id *id); -static int ftdi_sio_port_probe(struct usb_serial_port *port); -static void ftdi_sio_port_remove(struct usb_serial_port *port); -static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port); -static void ftdi_dtr_rts(struct usb_serial_port *port, int on); -static void ftdi_process_read_urb(struct urb *urb); -static int ftdi_prepare_write_buffer(struct usb_serial_port *port, - void *dest, size_t size); static void ftdi_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old); -static int ftdi_tiocmget(struct tty_struct *tty); -static int ftdi_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear); -static int ftdi_ioctl(struct tty_struct *tty, - unsigned int cmd, unsigned long arg); -static void get_serial_info(struct tty_struct *tty, struct serial_struct *ss); -static int set_serial_info(struct tty_struct *tty, - struct serial_struct *ss); -static void ftdi_break_ctl(struct tty_struct *tty, int break_state); -static bool ftdi_tx_empty(struct usb_serial_port *port); static int ftdi_get_modem_status(struct usb_serial_port *port, unsigned char status[2]); -static unsigned short int ftdi_232am_baud_base_to_divisor(int baud, int base); -static unsigned short int ftdi_232am_baud_to_divisor(int baud); -static u32 ftdi_232bm_baud_base_to_divisor(int baud, int base); -static u32 ftdi_232bm_baud_to_divisor(int baud); -static u32 ftdi_2232h_baud_base_to_divisor(int baud, int base); -static u32 ftdi_2232h_baud_to_divisor(int baud); - -static struct usb_serial_driver ftdi_sio_device = { - .driver = { - .owner = THIS_MODULE, - .name = "ftdi_sio", - }, - .description = "FTDI USB Serial Device", - .id_table = id_table_combined, - .num_ports = 1, - .bulk_in_size = 512, - .bulk_out_size = 256, - .probe = ftdi_sio_probe, - .port_probe = ftdi_sio_port_probe, - .port_remove = ftdi_sio_port_remove, - .open = ftdi_open, - .dtr_rts = ftdi_dtr_rts, - .throttle = usb_serial_generic_throttle, - .unthrottle = usb_serial_generic_unthrottle, - .process_read_urb = ftdi_process_read_urb, - .prepare_write_buffer = ftdi_prepare_write_buffer, - .tiocmget = ftdi_tiocmget, - .tiocmset = ftdi_tiocmset, - .tiocmiwait = usb_serial_generic_tiocmiwait, - .get_icount = usb_serial_generic_get_icount, - .ioctl = ftdi_ioctl, - .get_serial = get_serial_info, - .set_serial = set_serial_info, - .set_termios = ftdi_set_termios, - .break_ctl = ftdi_break_ctl, - .tx_empty = ftdi_tx_empty, -}; - -static struct usb_serial_driver * const serial_drivers[] = { - &ftdi_sio_device, NULL -}; - - #define WDR_TIMEOUT 5000 /* default urb timeout */ #define WDR_SHORT_TIMEOUT 1000 /* shorter urb timeout */ @@ -1261,7 +1227,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set, usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_MODEM_CTRL_REQUEST, FTDI_SIO_SET_MODEM_CTRL_REQUEST_TYPE, - value, priv->interface, + value, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(dev, "%s Error from MODEM_CTRL urb: DTR %s, RTS %s\n", @@ -1307,7 +1273,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, if (!baud) baud = 9600; switch (priv->chip_type) { - case SIO: /* SIO chip */ + case SIO: switch (baud) { case 300: div_value = ftdi_sio_b300; break; case 600: div_value = ftdi_sio_b600; break; @@ -1319,8 +1285,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, case 38400: div_value = ftdi_sio_b38400; break; case 57600: div_value = ftdi_sio_b57600; break; case 115200: div_value = ftdi_sio_b115200; break; - } /* baud */ - if (div_value == 0) { + default: dev_dbg(dev, "%s - Baudrate (%d) requested is not supported\n", __func__, baud); div_value = ftdi_sio_b9600; @@ -1328,7 +1293,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, div_okay = 0; } break; - case FT8U232AM: /* 8U232AM chip */ + case FT232A: if (baud <= 3000000) { div_value = ftdi_232am_baud_to_divisor(baud); } else { @@ -1338,10 +1303,10 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, div_okay = 0; } break; - case FT232BM: /* FT232BM chip */ - case FT2232C: /* FT2232C chip */ - case FT232RL: /* FT232RL chip */ - case FTX: /* FT-X series */ + case FT232B: + case FT2232C: + case FT232R: + case FTX: if (baud <= 3000000) { u16 product_id = le16_to_cpu( port->serial->dev->descriptor.idProduct); @@ -1361,9 +1326,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, baud = 9600; } break; - case FT2232H: /* FT2232H chip */ - case FT4232H: /* FT4232H chip */ - case FT232H: /* FT232H chip */ + default: if ((baud <= 12000000) && (baud >= 1200)) { div_value = ftdi_2232h_baud_to_divisor(baud); } else if (baud < 1200) { @@ -1375,7 +1338,7 @@ static u32 get_ftdi_divisor(struct tty_struct *tty, baud = 9600; } break; - } /* priv->chip_type */ + } if (div_okay) { dev_dbg(dev, "%s - Baud rate set to %d (divisor 0x%lX) on chip %s\n", @@ -1398,13 +1361,8 @@ static int change_speed(struct tty_struct *tty, struct usb_serial_port *port) index_value = get_ftdi_divisor(tty, port); value = (u16)index_value; index = (u16)(index_value >> 16); - if (priv->chip_type == FT2232C || priv->chip_type == FT2232H || - priv->chip_type == FT4232H || priv->chip_type == FT232H || - priv->chip_type == FTX) { - /* Probably the BM type needs the MSB of the encoded fractional - * divider also moved like for the chips above. Any infos? */ - index = (u16)((index << 8) | priv->interface); - } + if (priv->channel) + index = (u16)((index << 8) | priv->channel); rv = usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0), @@ -1422,7 +1380,7 @@ static int write_latency_timer(struct usb_serial_port *port) int rv; int l = priv->latency; - if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + if (priv->chip_type == SIO || priv->chip_type == FT232A) return -EINVAL; if (priv->flags & ASYNC_LOW_LATENCY) @@ -1434,7 +1392,7 @@ static int write_latency_timer(struct usb_serial_port *port) usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_LATENCY_TIMER_REQUEST, FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE, - l, priv->interface, + l, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) dev_err(&port->dev, "Unable to write latency timer: %i\n", rv); @@ -1450,7 +1408,7 @@ static int _read_latency_timer(struct usb_serial_port *port) rv = usb_control_msg_recv(udev, 0, FTDI_SIO_GET_LATENCY_TIMER_REQUEST, FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE, 0, - priv->interface, &buf, 1, WDR_TIMEOUT, + priv->channel, &buf, 1, WDR_TIMEOUT, GFP_KERNEL); if (rv == 0) rv = buf; @@ -1463,7 +1421,7 @@ static int read_latency_timer(struct usb_serial_port *port) struct ftdi_private *priv = usb_get_serial_port_data(port); int rv; - if (priv->chip_type == SIO || priv->chip_type == FT8U232AM) + if (priv->chip_type == SIO || priv->chip_type == FT232A) return -EINVAL; rv = _read_latency_timer(port); @@ -1538,90 +1496,97 @@ static int get_lsr_info(struct usb_serial_port *port, return 0; } - -/* Determine type of FTDI chip based on USB config and descriptor. */ -static void ftdi_determine_type(struct usb_serial_port *port) +static int ftdi_determine_type(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); struct usb_serial *serial = port->serial; struct usb_device *udev = serial->dev; - unsigned version; - unsigned interfaces; - - /* Assume it is not the original SIO device for now. */ - priv->baud_base = 48000000 / 2; + unsigned int version, ifnum; version = le16_to_cpu(udev->descriptor.bcdDevice); - interfaces = udev->actconfig->desc.bNumInterfaces; - dev_dbg(&port->dev, "%s: bcdDevice = 0x%x, bNumInterfaces = %u\n", __func__, - version, interfaces); - if (interfaces > 1) { - struct usb_interface *intf = serial->interface; - int ifnum = intf->cur_altsetting->desc.bInterfaceNumber; - - /* Multiple interfaces.*/ - if (version == 0x0800) { - priv->chip_type = FT4232H; - /* Hi-speed - baud clock runs at 120MHz */ - priv->baud_base = 120000000 / 2; - } else if (version == 0x0700) { - priv->chip_type = FT2232H; - /* Hi-speed - baud clock runs at 120MHz */ - priv->baud_base = 120000000 / 2; - } else - priv->chip_type = FT2232C; - - /* Determine interface code. */ - if (ifnum == 0) - priv->interface = INTERFACE_A; - else if (ifnum == 1) - priv->interface = INTERFACE_B; - else if (ifnum == 2) - priv->interface = INTERFACE_C; - else if (ifnum == 3) - priv->interface = INTERFACE_D; - - /* BM-type devices have a bug where bcdDevice gets set - * to 0x200 when iSerialNumber is 0. */ - if (version < 0x500) { - dev_dbg(&port->dev, - "%s: something fishy - bcdDevice too low for multi-interface device\n", - __func__); - } - } else if (version < 0x200) { - /* Old device. Assume it's the original SIO. */ - priv->chip_type = SIO; - priv->baud_base = 12000000 / 16; - } else if (version < 0x400) { - /* Assume it's an FT8U232AM (or FT8U245AM) */ - priv->chip_type = FT8U232AM; + ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + + /* Assume Hi-Speed type */ + priv->baud_base = 120000000 / 2; + priv->channel = CHANNEL_A + ifnum; + + switch (version) { + case 0x200: + priv->chip_type = FT232A; + priv->baud_base = 48000000 / 2; + priv->channel = 0; /* - * It might be a BM type because of the iSerialNumber bug. - * If iSerialNumber==0 and the latency timer is readable, - * assume it is BM type. + * FT232B devices have a bug where bcdDevice gets set to 0x200 + * when iSerialNumber is 0. Assume it is an FT232B in case the + * latency timer is readable. */ if (udev->descriptor.iSerialNumber == 0 && _read_latency_timer(port) >= 0) { - dev_dbg(&port->dev, - "%s: has latency timer so not an AM type\n", - __func__); - priv->chip_type = FT232BM; + priv->chip_type = FT232B; } - } else if (version < 0x600) { - /* Assume it's an FT232BM (or FT245BM) */ - priv->chip_type = FT232BM; - } else if (version < 0x900) { - /* Assume it's an FT232RL */ - priv->chip_type = FT232RL; - } else if (version < 0x1000) { - /* Assume it's an FT232H */ + break; + case 0x400: + priv->chip_type = FT232B; + priv->baud_base = 48000000 / 2; + priv->channel = 0; + break; + case 0x500: + priv->chip_type = FT2232C; + priv->baud_base = 48000000 / 2; + break; + case 0x600: + priv->chip_type = FT232R; + priv->baud_base = 48000000 / 2; + priv->channel = 0; + break; + case 0x700: + priv->chip_type = FT2232H; + break; + case 0x800: + priv->chip_type = FT4232H; + break; + case 0x900: priv->chip_type = FT232H; - } else { - /* Assume it's an FT-X series device */ + break; + case 0x1000: priv->chip_type = FTX; + priv->baud_base = 48000000 / 2; + break; + case 0x2800: + priv->chip_type = FT2233HP; + break; + case 0x2900: + priv->chip_type = FT4233HP; + break; + case 0x3000: + priv->chip_type = FT2232HP; + break; + case 0x3100: + priv->chip_type = FT4232HP; + break; + case 0x3200: + priv->chip_type = FT233HP; + break; + case 0x3300: + priv->chip_type = FT232HP; + break; + case 0x3600: + priv->chip_type = FT4232HA; + break; + default: + if (version < 0x200) { + priv->chip_type = SIO; + priv->baud_base = 12000000 / 16; + priv->channel = 0; + } else { + dev_err(&port->dev, "unknown device type: 0x%02x\n", version); + return -ENODEV; + } } dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]); + + return 0; } @@ -1720,7 +1685,7 @@ static ssize_t event_char_store(struct device *dev, usb_sndctrlpipe(udev, 0), FTDI_SIO_SET_EVENT_CHAR_REQUEST, FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE, - v, priv->interface, + v, priv->channel, NULL, 0, WDR_TIMEOUT); if (rv < 0) { dev_dbg(&port->dev, "Unable to write event character: %i\n", rv); @@ -1731,51 +1696,42 @@ static ssize_t event_char_store(struct device *dev, } static DEVICE_ATTR_WO(event_char); -static int create_sysfs_attrs(struct usb_serial_port *port) -{ - struct ftdi_private *priv = usb_get_serial_port_data(port); - int retval = 0; - - /* XXX I've no idea if the original SIO supports the event_char - * sysfs parameter, so I'm playing it safe. */ - if (priv->chip_type != SIO) { - dev_dbg(&port->dev, "sysfs attributes for %s\n", ftdi_chip_name[priv->chip_type]); - retval = device_create_file(&port->dev, &dev_attr_event_char); - if ((!retval) && - (priv->chip_type == FT232BM || - priv->chip_type == FT2232C || - priv->chip_type == FT232RL || - priv->chip_type == FT2232H || - priv->chip_type == FT4232H || - priv->chip_type == FT232H || - priv->chip_type == FTX)) { - retval = device_create_file(&port->dev, - &dev_attr_latency_timer); - } - } - return retval; -} +static struct attribute *ftdi_attrs[] = { + &dev_attr_event_char.attr, + &dev_attr_latency_timer.attr, + NULL +}; -static void remove_sysfs_attrs(struct usb_serial_port *port) +static umode_t ftdi_is_visible(struct kobject *kobj, struct attribute *attr, int idx) { + struct device *dev = kobj_to_dev(kobj); + struct usb_serial_port *port = to_usb_serial_port(dev); struct ftdi_private *priv = usb_get_serial_port_data(port); + enum ftdi_chip_type type = priv->chip_type; - /* XXX see create_sysfs_attrs */ - if (priv->chip_type != SIO) { - device_remove_file(&port->dev, &dev_attr_event_char); - if (priv->chip_type == FT232BM || - priv->chip_type == FT2232C || - priv->chip_type == FT232RL || - priv->chip_type == FT2232H || - priv->chip_type == FT4232H || - priv->chip_type == FT232H || - priv->chip_type == FTX) { - device_remove_file(&port->dev, &dev_attr_latency_timer); - } + if (attr == &dev_attr_event_char.attr) { + if (type == SIO) + return 0; + } + + if (attr == &dev_attr_latency_timer.attr) { + if (type == SIO || type == FT232A) + return 0; } + return attr->mode; } +static const struct attribute_group ftdi_group = { + .attrs = ftdi_attrs, + .is_visible = ftdi_is_visible, +}; + +static const struct attribute_group *ftdi_groups[] = { + &ftdi_group, + NULL +}; + #ifdef CONFIG_GPIOLIB static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) @@ -1794,7 +1750,7 @@ static int ftdi_set_bitmode(struct usb_serial_port *port, u8 mode) usb_sndctrlpipe(serial->dev, 0), FTDI_SIO_SET_BITMODE_REQUEST, FTDI_SIO_SET_BITMODE_REQUEST_TYPE, val, - priv->interface, NULL, 0, WDR_TIMEOUT); + priv->channel, NULL, 0, WDR_TIMEOUT); if (result < 0) { dev_err(&serial->interface->dev, "bitmode request failed for value 0x%04x: %d\n", @@ -1858,7 +1814,7 @@ static int ftdi_read_cbus_pins(struct usb_serial_port *port) result = usb_control_msg_recv(serial->dev, 0, FTDI_SIO_READ_PINS_REQUEST, FTDI_SIO_READ_PINS_REQUEST_TYPE, 0, - priv->interface, &buf, 1, WDR_TIMEOUT, + priv->channel, &buf, 1, WDR_TIMEOUT, GFP_KERNEL); if (result == 0) result = buf; @@ -2143,7 +2099,7 @@ static int ftdi_gpio_init(struct usb_serial_port *port) case FT232H: result = ftdi_gpio_init_ft232h(port); break; - case FT232RL: + case FT232R: result = ftdi_gpio_init_ft232r(port); break; case FTX: @@ -2213,12 +2169,9 @@ static void ftdi_gpio_remove(struct usb_serial_port *port) { } * *************************************************************************** */ -/* Probe function to check for special devices */ -static int ftdi_sio_probe(struct usb_serial *serial, - const struct usb_device_id *id) +static int ftdi_probe(struct usb_serial *serial, const struct usb_device_id *id) { - const struct ftdi_sio_quirk *quirk = - (struct ftdi_sio_quirk *)id->driver_info; + const struct ftdi_quirk *quirk = (struct ftdi_quirk *)id->driver_info; if (quirk && quirk->probe) { int ret = quirk->probe(serial); @@ -2231,10 +2184,10 @@ static int ftdi_sio_probe(struct usb_serial *serial, return 0; } -static int ftdi_sio_port_probe(struct usb_serial_port *port) +static int ftdi_port_probe(struct usb_serial_port *port) { + const struct ftdi_quirk *quirk = usb_get_serial_data(port->serial); struct ftdi_private *priv; - const struct ftdi_sio_quirk *quirk = usb_get_serial_data(port->serial); int result; priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL); @@ -2248,12 +2201,14 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) usb_set_serial_port_data(port, priv); - ftdi_determine_type(port); + result = ftdi_determine_type(port); + if (result) + goto err_free; + ftdi_set_max_packet_size(port); if (read_latency_timer(port) < 0) priv->latency = 16; write_latency_timer(port); - create_sysfs_attrs(port); result = ftdi_gpio_init(port); if (result < 0) { @@ -2263,6 +2218,11 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port) } return 0; + +err_free: + kfree(priv); + + return result; } /* Setup for the USB-UIRT device, which requires hardwired @@ -2373,14 +2333,12 @@ static int ftdi_stmclite_probe(struct usb_serial *serial) return 0; } -static void ftdi_sio_port_remove(struct usb_serial_port *port) +static void ftdi_port_remove(struct usb_serial_port *port) { struct ftdi_private *priv = usb_get_serial_port_data(port); ftdi_gpio_remove(port); - remove_sysfs_attrs(port); - kfree(priv); } @@ -2394,7 +2352,7 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, FTDI_SIO_RESET_SIO, - priv->interface, NULL, 0, WDR_TIMEOUT); + priv->channel, NULL, 0, WDR_TIMEOUT); /* Termios defaults are set by usb_serial_init. We don't change port->tty->termios - this would lose speed settings, etc. @@ -2417,7 +2375,7 @@ static void ftdi_dtr_rts(struct usb_serial_port *port, int on) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, NULL, 0, + 0, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "error from flowcontrol urb\n"); } @@ -2610,7 +2568,7 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state) usb_sndctrlpipe(port->serial->dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - value , priv->interface, + value, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(&port->dev, "%s FAILED to enable/disable break state (state was %d)\n", __func__, break_state); @@ -2746,7 +2704,7 @@ no_skip: if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_DATA_REQUEST, FTDI_SIO_SET_DATA_REQUEST_TYPE, - value , priv->interface, + value, priv->channel, NULL, 0, WDR_SHORT_TIMEOUT) < 0) { dev_err(ddev, "%s FAILED to set databits/stopbits/parity\n", __func__); @@ -2759,7 +2717,7 @@ no_data_parity_stop_changes: if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE, - 0, priv->interface, + 0, priv->channel, NULL, 0, WDR_TIMEOUT) < 0) { dev_err(ddev, "%s error from disable flowcontrol urb\n", __func__); @@ -2793,7 +2751,7 @@ no_c_cflag_changes: index = FTDI_SIO_DISABLE_FLOW_CTRL; } - index |= priv->interface; + index |= priv->channel; ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), FTDI_SIO_SET_FLOW_CTRL_REQUEST, @@ -2821,33 +2779,19 @@ static int ftdi_get_modem_status(struct usb_serial_port *port, if (!buf) return -ENOMEM; /* - * The 8U232AM returns a two byte value (the SIO a 1 byte value) in - * the same format as the data returned from the in point. + * The device returns a two byte value (the SIO a 1 byte value) in the + * same format as the data returned from the IN endpoint. */ - switch (priv->chip_type) { - case SIO: + if (priv->chip_type == SIO) len = 1; - break; - case FT8U232AM: - case FT232BM: - case FT2232C: - case FT232RL: - case FT2232H: - case FT4232H: - case FT232H: - case FTX: + else len = 2; - break; - default: - ret = -EFAULT; - goto out; - } ret = usb_control_msg(port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0), FTDI_SIO_GET_MODEM_STATUS_REQUEST, FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, - 0, priv->interface, + 0, priv->channel, buf, len, WDR_TIMEOUT); /* NOTE: We allow short responses and handle that below. */ @@ -2917,6 +2861,41 @@ static int ftdi_ioctl(struct tty_struct *tty, return -ENOIOCTLCMD; } +static struct usb_serial_driver ftdi_device = { + .driver = { + .owner = THIS_MODULE, + .name = "ftdi_sio", + .dev_groups = ftdi_groups, + }, + .description = "FTDI USB Serial Device", + .id_table = id_table_combined, + .num_ports = 1, + .bulk_in_size = 512, + .bulk_out_size = 256, + .probe = ftdi_probe, + .port_probe = ftdi_port_probe, + .port_remove = ftdi_port_remove, + .open = ftdi_open, + .dtr_rts = ftdi_dtr_rts, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, + .process_read_urb = ftdi_process_read_urb, + .prepare_write_buffer = ftdi_prepare_write_buffer, + .tiocmget = ftdi_tiocmget, + .tiocmset = ftdi_tiocmset, + .tiocmiwait = usb_serial_generic_tiocmiwait, + .get_icount = usb_serial_generic_get_icount, + .ioctl = ftdi_ioctl, + .get_serial = get_serial_info, + .set_serial = set_serial_info, + .set_termios = ftdi_set_termios, + .break_ctl = ftdi_break_ctl, + .tx_empty = ftdi_tx_empty, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &ftdi_device, NULL +}; module_usb_serial_driver(serial_drivers, id_table_combined); MODULE_AUTHOR(DRIVER_AUTHOR); diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index be1641e0408b..55ea61264f91 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -40,11 +40,11 @@ #define FTDI_SIO_READ_PINS 0x0c /* Read immediate value of pins */ #define FTDI_SIO_READ_EEPROM 0x90 /* Read EEPROM */ -/* Interface indices for FT2232, FT2232H and FT4232H devices */ -#define INTERFACE_A 1 -#define INTERFACE_B 2 -#define INTERFACE_C 3 -#define INTERFACE_D 4 +/* Channel indices for FT2232, FT2232H and FT4232H devices */ +#define CHANNEL_A 1 +#define CHANNEL_B 2 +#define CHANNEL_C 3 +#define CHANNEL_D 4 /* @@ -153,18 +153,6 @@ * not supported by the FT8U232AM). */ -enum ftdi_chip_type { - SIO = 1, - FT8U232AM = 2, - FT232BM = 3, - FT2232C = 4, - FT232RL = 5, - FT2232H = 6, - FT4232H = 7, - FT232H = 8, - FTX = 9, -}; - enum ftdi_sio_baudrate { ftdi_sio_b300 = 0, ftdi_sio_b600 = 1, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 31c8ccabbbb7..e2099445db70 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -25,6 +25,13 @@ #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */ #define FTDI_232H_PID 0x6014 /* Single channel hi-speed device */ #define FTDI_FTX_PID 0x6015 /* FT-X series (FT201X, FT230X, FT231X, etc) */ +#define FTDI_FT2233HP_PID 0x6040 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4233HP_PID 0x6041 /* Quad channel hi-speed device with PD */ +#define FTDI_FT2232HP_PID 0x6042 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4232HP_PID 0x6043 /* Quad channel hi-speed device with PD */ +#define FTDI_FT233HP_PID 0x6044 /* Dual channel hi-speed device with PD */ +#define FTDI_FT232HP_PID 0x6045 /* Dual channel hi-speed device with PD */ +#define FTDI_FT4232HA_PID 0x6048 /* Quad channel automotive grade hi-speed device */ #define FTDI_SIO_PID 0x8372 /* Product Id SIO application of 8U100AX */ #define FTDI_232RL_PID 0xFBFA /* Product ID for FT232RL */ diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 1db2eefeea22..01f3c2779ccf 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -201,7 +201,7 @@ static int onetouch_connect_input(struct us_data *ss) onetouch->dev = input_dev; if (udev->manufacturer) - strlcpy(onetouch->name, udev->manufacturer, + strscpy(onetouch->name, udev->manufacturer, sizeof(onetouch->name)); if (udev->product) { if (udev->manufacturer) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 4993227ab293..20dcbccb290b 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1275,12 +1275,6 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999, USB_SC_RBC, USB_PR_BULK, NULL, 0 ), -UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100, - "Samsung", - "Flash Drive FIT", - USB_SC_DEVICE, USB_PR_DEVICE, NULL, - US_FL_MAX_SECTORS_64), - /* aeb */ UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff, "Feiya", diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c index c0f0842d443c..f178d0eb47b1 100644 --- a/drivers/usb/typec/anx7411.c +++ b/drivers/usb/typec/anx7411.c @@ -1105,7 +1105,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx, int ret; struct device_node *node; - node = of_find_node_by_name(dev->of_node, "orientation_switch"); + node = of_get_child_by_name(dev->of_node, "orientation_switch"); if (!node) return 0; @@ -1115,7 +1115,7 @@ static int anx7411_typec_switch_probe(struct anx7411_data *ctx, return ret; } - node = of_find_node_by_name(dev->of_node, "mode_switch"); + node = of_get_child_by_name(dev->of_node, "mode_switch"); if (!node) { dev_err(dev, "no typec mux exist"); ret = -ENODEV; diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 073fd2ea5e0b..e6b88ca4a4b9 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -35,6 +35,17 @@ config TYPEC_MT6360 USB Type-C. It works with Type-C Port Controller Manager to provide USB PD and USB Type-C functionalities. +config TYPEC_TCPCI_MT6370 + tristate "MediaTek MT6370 Type-C driver" + depends on MFD_MT6370 + help + MediaTek MT6370 is a multi-functional IC that includes + USB Type-C. It works with Type-C Port Controller Manager + to provide USB PD and USB Type-C functionalities. + + This driver can also be built as a module. The module + will be called "tcpci_mt6370". + config TYPEC_TCPCI_MAXIM tristate "Maxim TCPCI based Type-C chip driver" help diff --git a/drivers/usb/typec/tcpm/Makefile b/drivers/usb/typec/tcpm/Makefile index 7d499f3569fd..906d9dced8e7 100644 --- a/drivers/usb/typec/tcpm/Makefile +++ b/drivers/usb/typec/tcpm/Makefile @@ -6,4 +6,5 @@ typec_wcove-y := wcove.o obj-$(CONFIG_TYPEC_TCPCI) += tcpci.o obj-$(CONFIG_TYPEC_RT1711H) += tcpci_rt1711h.o obj-$(CONFIG_TYPEC_MT6360) += tcpci_mt6360.o +obj-$(CONFIG_TYPEC_TCPCI_MT6370) += tcpci_mt6370.o obj-$(CONFIG_TYPEC_TCPCI_MAXIM) += tcpci_maxim.o diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c index 96c55eaf3f80..ab89c014606e 100644 --- a/drivers/usb/typec/tcpm/fusb302.c +++ b/drivers/usb/typec/tcpm/fusb302.c @@ -151,7 +151,7 @@ static void _fusb302_log(struct fusb302_chip *chip, const char *fmt, if (fusb302_log_full(chip)) { chip->logbuffer_head = max(chip->logbuffer_head - 1, 0); - strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); + strscpy(tmpbuffer, "overflow", sizeof(tmpbuffer)); } if (chip->logbuffer_head < 0 || diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index 812784702d53..50674ecf430d 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -27,11 +27,6 @@ #define VPPS_VALID_MIN_MV 100 #define VSINKDISCONNECT_PD_MIN_PERCENT 90 -#define tcpc_presenting_rd(reg, cc) \ - (!(TCPC_ROLE_CTRL_DRP & (reg)) && \ - (((reg) & (TCPC_ROLE_CTRL_## cc ##_MASK << TCPC_ROLE_CTRL_## cc ##_SHIFT)) == \ - (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_## cc ##_SHIFT))) - struct tcpci { struct device *dev; @@ -218,23 +213,6 @@ static int tcpci_start_toggling(struct tcpc_dev *tcpc, TCPC_CMD_LOOK4CONNECTION); } -static enum typec_cc_status tcpci_to_typec_cc(unsigned int cc, bool sink) -{ - switch (cc) { - case 0x1: - return sink ? TYPEC_CC_RP_DEF : TYPEC_CC_RA; - case 0x2: - return sink ? TYPEC_CC_RP_1_5 : TYPEC_CC_RD; - case 0x3: - if (sink) - return TYPEC_CC_RP_3_0; - fallthrough; - case 0x0: - default: - return TYPEC_CC_OPEN; - } -} - static int tcpci_get_cc(struct tcpc_dev *tcpc, enum typec_cc_status *cc1, enum typec_cc_status *cc2) { diff --git a/drivers/usb/typec/tcpm/tcpci_mt6370.c b/drivers/usb/typec/tcpm/tcpci_mt6370.c new file mode 100644 index 000000000000..c5bb201a5163 --- /dev/null +++ b/drivers/usb/typec/tcpm/tcpci_mt6370.c @@ -0,0 +1,207 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 Richtek Technology Corp. + * + * Author: ChiYuan Huang <cy_huang@richtek.com> + */ + +#include <linux/bits.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pm_wakeup.h> +#include <linux/pm_wakeirq.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/usb/tcpci.h> +#include <linux/usb/tcpm.h> + +#define MT6370_REG_SYSCTRL8 0x9B + +#define MT6370_AUTOIDLE_MASK BIT(3) + +#define MT6370_VENDOR_ID 0x29CF +#define MT6370_TCPC_DID_A 0x2170 + +struct mt6370_priv { + struct device *dev; + struct regulator *vbus; + struct tcpci *tcpci; + struct tcpci_data tcpci_data; +}; + +static const struct reg_sequence mt6370_reg_init[] = { + REG_SEQ(0xA0, 0x1, 1000), + REG_SEQ(0x81, 0x38, 0), + REG_SEQ(0x82, 0x82, 0), + REG_SEQ(0xBA, 0xFC, 0), + REG_SEQ(0xBB, 0x50, 0), + REG_SEQ(0x9E, 0x8F, 0), + REG_SEQ(0xA1, 0x5, 0), + REG_SEQ(0xA2, 0x4, 0), + REG_SEQ(0xA3, 0x4A, 0), + REG_SEQ(0xA4, 0x01, 0), + REG_SEQ(0x95, 0x01, 0), + REG_SEQ(0x80, 0x71, 0), + REG_SEQ(0x9B, 0x3A, 1000), +}; + +static int mt6370_tcpc_init(struct tcpci *tcpci, struct tcpci_data *data) +{ + u16 did; + int ret; + + ret = regmap_register_patch(data->regmap, mt6370_reg_init, + ARRAY_SIZE(mt6370_reg_init)); + if (ret) + return ret; + + ret = regmap_raw_read(data->regmap, TCPC_BCD_DEV, &did, sizeof(u16)); + if (ret) + return ret; + + if (did == MT6370_TCPC_DID_A) + return regmap_write(data->regmap, TCPC_FAULT_CTRL, 0x80); + + return 0; +} + +static int mt6370_tcpc_set_vconn(struct tcpci *tcpci, struct tcpci_data *data, + bool enable) +{ + return regmap_update_bits(data->regmap, MT6370_REG_SYSCTRL8, + MT6370_AUTOIDLE_MASK, + enable ? 0 : MT6370_AUTOIDLE_MASK); +} + +static int mt6370_tcpc_set_vbus(struct tcpci *tcpci, struct tcpci_data *data, + bool source, bool sink) +{ + struct mt6370_priv *priv = container_of(data, struct mt6370_priv, + tcpci_data); + int ret; + + ret = regulator_is_enabled(priv->vbus); + if (ret < 0) + return ret; + + if (ret && !source) + return regulator_disable(priv->vbus); + + if (!ret && source) + return regulator_enable(priv->vbus); + + return 0; +} + +static irqreturn_t mt6370_irq_handler(int irq, void *dev_id) +{ + struct mt6370_priv *priv = dev_id; + + return tcpci_irq(priv->tcpci); +} + +static int mt6370_check_vendor_info(struct mt6370_priv *priv) +{ + struct regmap *regmap = priv->tcpci_data.regmap; + u16 vid; + int ret; + + ret = regmap_raw_read(regmap, TCPC_VENDOR_ID, &vid, sizeof(u16)); + if (ret) + return ret; + + if (vid != MT6370_VENDOR_ID) + return dev_err_probe(priv->dev, -ENODEV, + "Vendor ID not correct 0x%02x\n", vid); + + return 0; +} + +static void mt6370_unregister_tcpci_port(void *tcpci) +{ + tcpci_unregister_port(tcpci); +} + +static int mt6370_tcpc_probe(struct platform_device *pdev) +{ + struct mt6370_priv *priv; + struct device *dev = &pdev->dev; + int irq, ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + + priv->tcpci_data.regmap = dev_get_regmap(dev->parent, NULL); + if (!priv->tcpci_data.regmap) + return dev_err_probe(dev, -ENODEV, "Failed to init regmap\n"); + + ret = mt6370_check_vendor_info(priv); + if (ret) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return dev_err_probe(dev, irq, "Failed to get irq\n"); + + /* Assign TCPCI feature and ops */ + priv->tcpci_data.auto_discharge_disconnect = 1; + priv->tcpci_data.init = mt6370_tcpc_init; + priv->tcpci_data.set_vconn = mt6370_tcpc_set_vconn; + + priv->vbus = devm_regulator_get_optional(dev, "vbus"); + if (!IS_ERR(priv->vbus)) + priv->tcpci_data.set_vbus = mt6370_tcpc_set_vbus; + + priv->tcpci = tcpci_register_port(dev, &priv->tcpci_data); + if (IS_ERR(priv->tcpci)) + return dev_err_probe(dev, PTR_ERR(priv->tcpci), + "Failed to register tcpci port\n"); + + ret = devm_add_action_or_reset(dev, mt6370_unregister_tcpci_port, priv->tcpci); + if (ret) + return ret; + + ret = devm_request_threaded_irq(dev, irq, NULL, mt6370_irq_handler, + IRQF_ONESHOT, dev_name(dev), priv); + if (ret) + return dev_err_probe(dev, ret, "Failed to allocate irq\n"); + + device_init_wakeup(dev, true); + dev_pm_set_wake_irq(dev, irq); + + return 0; +} + +static int mt6370_tcpc_remove(struct platform_device *pdev) +{ + dev_pm_clear_wake_irq(&pdev->dev); + device_init_wakeup(&pdev->dev, false); + + return 0; +} + +static const struct of_device_id mt6370_tcpc_devid_table[] = { + { .compatible = "mediatek,mt6370-tcpc" }, + {} +}; +MODULE_DEVICE_TABLE(of, mt6370_tcpc_devid_table); + +static struct platform_driver mt6370_tcpc_driver = { + .driver = { + .name = "mt6370-tcpc", + .of_match_table = mt6370_tcpc_devid_table, + }, + .probe = mt6370_tcpc_probe, + .remove = mt6370_tcpc_remove, +}; +module_platform_driver(mt6370_tcpc_driver); + +MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>"); +MODULE_DESCRIPTION("MT6370 USB Type-C Port Controller Interface Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/typec/tcpm/tcpci_rt1711h.c b/drivers/usb/typec/tcpm/tcpci_rt1711h.c index 3291ca4948da..5dc34f9d9f51 100644 --- a/drivers/usb/typec/tcpm/tcpci_rt1711h.c +++ b/drivers/usb/typec/tcpm/tcpci_rt1711h.c @@ -5,6 +5,7 @@ * Richtek RT1711H Type-C Chip Driver */ +#include <linux/bits.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/i2c.h> @@ -13,16 +14,27 @@ #include <linux/usb/tcpci.h> #include <linux/usb/tcpm.h> #include <linux/regmap.h> +#include <linux/regulator/consumer.h> #define RT1711H_VID 0x29CF #define RT1711H_PID 0x1711 +#define RT1711H_DID 0x2171 +#define RT1715_DID 0x2173 -#define RT1711H_RTCTRL8 0x9B +#define RT1711H_PHYCTRL1 0x80 +#define RT1711H_PHYCTRL2 0x81 + +#define RT1711H_RTCTRL4 0x93 +/* rx threshold of rd/rp: 1b0 for level 0.4V/0.7V, 1b1 for 0.35V/0.75V */ +#define RT1711H_BMCIO_RXDZSEL BIT(0) +#define RT1711H_RTCTRL8 0x9B /* Autoidle timeout = (tout * 2 + 1) * 6.4ms */ #define RT1711H_RTCTRL8_SET(ck300, ship_off, auto_idle, tout) \ (((ck300) << 7) | ((ship_off) << 5) | \ ((auto_idle) << 3) | ((tout) & 0x07)) +#define RT1711H_AUTOIDLEEN BIT(3) +#define RT1711H_ENEXTMSG BIT(4) #define RT1711H_RTCTRL11 0x9E @@ -35,10 +47,17 @@ #define RT1711H_RTCTRL15 0xA2 #define RT1711H_RTCTRL16 0xA3 +#define RT1711H_RTCTRL18 0xAF +/* 1b0 as fixed rx threshold of rd/rp 0.55V, 1b1 depends on RTCRTL4[0] */ +#define BMCIO_RXDZEN BIT(0) + struct rt1711h_chip { struct tcpci_data data; struct tcpci *tcpci; struct device *dev; + struct regulator *vbus; + bool src_en; + u16 did; }; static int rt1711h_read16(struct rt1711h_chip *chip, unsigned int reg, u16 *val) @@ -75,8 +94,9 @@ static struct rt1711h_chip *tdata_to_rt1711h(struct tcpci_data *tdata) static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) { - int ret; struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + struct regmap *regmap = chip->data.regmap; + int ret; /* CK 300K from 320K, shipping off, auto_idle enable, tout = 32ms */ ret = rt1711h_write8(chip, RT1711H_RTCTRL8, @@ -84,6 +104,14 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) if (ret < 0) return ret; + /* Enable PD30 extended message for RT1715 */ + if (chip->did == RT1715_DID) { + ret = regmap_update_bits(regmap, RT1711H_RTCTRL8, + RT1711H_ENEXTMSG, RT1711H_ENEXTMSG); + if (ret < 0) + return ret; + } + /* I2C reset : (val + 1) * 12.5ms */ ret = rt1711h_write8(chip, RT1711H_RTCTRL11, RT1711H_RTCTRL11_SET(1, 0x0F)); @@ -101,7 +129,37 @@ static int rt1711h_init(struct tcpci *tcpci, struct tcpci_data *tdata) return ret; /* dcSRC.DRP : 33% */ - return rt1711h_write16(chip, RT1711H_RTCTRL16, 330); + ret = rt1711h_write16(chip, RT1711H_RTCTRL16, 330); + if (ret < 0) + return ret; + + /* Enable phy discard retry, retry count 7, rx filter deglitch 100 us */ + ret = rt1711h_write8(chip, RT1711H_PHYCTRL1, 0xF1); + if (ret < 0) + return ret; + + /* Decrease wait time of BMC-encoded 1 bit from 2.67us to 2.55us */ + /* wait time : (val * .4167) us */ + return rt1711h_write8(chip, RT1711H_PHYCTRL2, 62); +} + +static int rt1711h_set_vbus(struct tcpci *tcpci, struct tcpci_data *tdata, + bool src, bool snk) +{ + struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); + int ret; + + if (chip->src_en == src) + return 0; + + if (src) + ret = regulator_enable(chip->vbus); + else + ret = regulator_disable(chip->vbus); + + if (!ret) + chip->src_en = src; + return ret; } static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, @@ -109,8 +167,55 @@ static int rt1711h_set_vconn(struct tcpci *tcpci, struct tcpci_data *tdata, { struct rt1711h_chip *chip = tdata_to_rt1711h(tdata); - return rt1711h_write8(chip, RT1711H_RTCTRL8, - RT1711H_RTCTRL8_SET(0, 1, !enable, 2)); + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL8, + RT1711H_AUTOIDLEEN, enable ? 0 : RT1711H_AUTOIDLEEN); +} + +/* + * Selects the CC PHY noise filter voltage level according to the remote current + * CC voltage level. + * + * @status: The port's current cc status read from IC + * Return 0 if writes succeed; failure code otherwise + */ +static inline int rt1711h_init_cc_params(struct rt1711h_chip *chip, u8 status) +{ + int ret, cc1, cc2; + u8 role = 0; + u32 rxdz_en, rxdz_sel; + + ret = rt1711h_read8(chip, TCPC_ROLE_CTRL, &role); + if (ret < 0) + return ret; + + cc1 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC1_SHIFT) & + TCPC_CC_STATUS_CC1_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC1)); + cc2 = tcpci_to_typec_cc((status >> TCPC_CC_STATUS_CC2_SHIFT) & + TCPC_CC_STATUS_CC2_MASK, + status & TCPC_CC_STATUS_TERM || + tcpc_presenting_rd(role, CC2)); + + if ((cc1 >= TYPEC_CC_RP_1_5 && cc2 < TYPEC_CC_RP_DEF) || + (cc2 >= TYPEC_CC_RP_1_5 && cc1 < TYPEC_CC_RP_DEF)) { + rxdz_en = BMCIO_RXDZEN; + if (chip->did == RT1715_DID) + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + else + rxdz_sel = 0; + } else { + rxdz_en = 0; + rxdz_sel = RT1711H_BMCIO_RXDZSEL; + } + + ret = regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL18, + BMCIO_RXDZEN, rxdz_en); + if (ret < 0) + return ret; + + return regmap_update_bits(chip->data.regmap, RT1711H_RTCTRL4, + RT1711H_BMCIO_RXDZSEL, rxdz_sel); } static int rt1711h_start_drp_toggling(struct tcpci *tcpci, @@ -173,6 +278,8 @@ static irqreturn_t rt1711h_irq(int irq, void *dev_id) /* Clear cc change event triggered by starting toggling */ if (status & TCPC_CC_STATUS_TOGGLING) rt1711h_write8(chip, TCPC_ALERT, TCPC_ALERT_CC_STATUS); + else + rt1711h_init_cc_params(chip, status); } out: @@ -191,7 +298,7 @@ static int rt1711h_sw_reset(struct rt1711h_chip *chip) return 0; } -static int rt1711h_check_revision(struct i2c_client *i2c) +static int rt1711h_check_revision(struct i2c_client *i2c, struct rt1711h_chip *chip) { int ret; @@ -209,7 +316,15 @@ static int rt1711h_check_revision(struct i2c_client *i2c) dev_err(&i2c->dev, "pid is not correct, 0x%04x\n", ret); return -ENODEV; } - return 0; + ret = i2c_smbus_read_word_data(i2c, TCPC_BCD_DEV); + if (ret < 0) + return ret; + if (ret != chip->did) { + dev_err(&i2c->dev, "did is not correct, 0x%04x\n", ret); + return -ENODEV; + } + dev_dbg(&i2c->dev, "did is 0x%04x\n", ret); + return ret; } static int rt1711h_probe(struct i2c_client *client, @@ -218,16 +333,18 @@ static int rt1711h_probe(struct i2c_client *client, int ret; struct rt1711h_chip *chip; - ret = rt1711h_check_revision(client); + chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->did = (size_t)device_get_match_data(&client->dev); + + ret = rt1711h_check_revision(client, chip); if (ret < 0) { dev_err(&client->dev, "check vid/pid fail\n"); return ret; } - chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - chip->data.regmap = devm_regmap_init_i2c(client, &rt1711h_regmap_config); if (IS_ERR(chip->data.regmap)) @@ -245,7 +362,12 @@ static int rt1711h_probe(struct i2c_client *client, if (ret < 0) return ret; + chip->vbus = devm_regulator_get(&client->dev, "vbus"); + if (IS_ERR(chip->vbus)) + return PTR_ERR(chip->vbus); + chip->data.init = rt1711h_init; + chip->data.set_vbus = rt1711h_set_vbus; chip->data.set_vconn = rt1711h_set_vconn; chip->data.start_drp_toggling = rt1711h_start_drp_toggling; chip->tcpci = tcpci_register_port(chip->dev, &chip->data); @@ -273,13 +395,15 @@ static int rt1711h_remove(struct i2c_client *client) static const struct i2c_device_id rt1711h_id[] = { { "rt1711h", 0 }, + { "rt1715", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, rt1711h_id); #ifdef CONFIG_OF static const struct of_device_id rt1711h_of_match[] = { - { .compatible = "richtek,rt1711h", }, + { .compatible = "richtek,rt1711h", .data = (void *)RT1711H_DID }, + { .compatible = "richtek,rt1715", .data = (void *)RT1715_DID }, {}, }; MODULE_DEVICE_TABLE(of, rt1711h_of_match); diff --git a/drivers/usb/typec/ucsi/ucsi_stm32g0.c b/drivers/usb/typec/ucsi/ucsi_stm32g0.c index 061551d464f1..6ced49e4d208 100644 --- a/drivers/usb/typec/ucsi/ucsi_stm32g0.c +++ b/drivers/usb/typec/ucsi/ucsi_stm32g0.c @@ -599,7 +599,7 @@ static int ucsi_stm32g0_probe_bootloader(struct ucsi *ucsi) g0->i2c_bl = i2c_new_dummy_device(g0->client->adapter, STM32G0_I2C_BL_ADDR); if (IS_ERR(g0->i2c_bl)) { ret = dev_err_probe(g0->dev, PTR_ERR(g0->i2c_bl), - "Failed to register booloader I2C address\n"); + "Failed to register bootloader I2C address\n"); return ret; } } diff --git a/drivers/usb/usbip/stub_main.c b/drivers/usb/usbip/stub_main.c index 77a5b3f8736a..e8c3131a8543 100644 --- a/drivers/usb/usbip/stub_main.c +++ b/drivers/usb/usbip/stub_main.c @@ -100,7 +100,7 @@ static int add_match_busid(char *busid) for (i = 0; i < MAX_BUSID; i++) { spin_lock(&busid_table[i].busid_lock); if (!busid_table[i].name[0]) { - strlcpy(busid_table[i].name, busid, BUSID_SIZE); + strscpy(busid_table[i].name, busid, BUSID_SIZE); if ((busid_table[i].status != STUB_BUSID_ALLOC) && (busid_table[i].status != STUB_BUSID_REMOV)) busid_table[i].status = STUB_BUSID_ADDED; diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index 5dd41e8215e0..fc01b31bbb87 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -464,7 +464,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, int nents; int num_urbs = 1; int pipe = get_pipe(sdev, pdu); - int use_sg = pdu->u.cmd_submit.transfer_flags & URB_DMA_MAP_SG; + int use_sg = pdu->u.cmd_submit.transfer_flags & USBIP_URB_DMA_MAP_SG; int support_sg = 1; int np = 0; int ret, i; @@ -514,7 +514,7 @@ static void stub_recv_cmd_submit(struct stub_device *sdev, num_urbs = nents; priv->completed_urbs = 0; pdu->u.cmd_submit.transfer_flags &= - ~URB_DMA_MAP_SG; + ~USBIP_URB_DMA_MAP_SG; } } else { buffer = kzalloc(buf_len, GFP_KERNEL); diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index 2ab99244bc31..053a2bca4c47 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -344,6 +344,91 @@ static unsigned int tweak_transfer_flags(unsigned int flags) return flags; } +/* + * USBIP driver packs URB transfer flags in PDUs that are exchanged + * between Server (usbip_host) and Client (vhci_hcd). URB_* flags + * are internal to kernel and could change. Where as USBIP URB flags + * exchanged in PDUs are USBIP user API must not change. + * + * USBIP_URB* flags are exported as explicit API and client and server + * do mapping from kernel flags to USBIP_URB*. Details as follows: + * + * Client tx path (USBIP_CMD_SUBMIT): + * - Maps URB_* to USBIP_URB_* when it sends USBIP_CMD_SUBMIT packet. + * + * Server rx path (USBIP_CMD_SUBMIT): + * - Maps USBIP_URB_* to URB_* when it receives USBIP_CMD_SUBMIT packet. + * + * Flags aren't included in USBIP_CMD_UNLINK and USBIP_RET_SUBMIT packets + * and no special handling is needed for them in the following cases: + * - Server rx path (USBIP_CMD_UNLINK) + * - Client rx path & Server tx path (USBIP_RET_SUBMIT) + * + * Code paths: + * usbip_pack_pdu() is the common routine that handles packing pdu from + * urb and unpack pdu to an urb. + * + * usbip_pack_cmd_submit() and usbip_pack_ret_submit() handle + * USBIP_CMD_SUBMIT and USBIP_RET_SUBMIT respectively. + * + * usbip_map_urb_to_usbip() and usbip_map_usbip_to_urb() are used + * by usbip_pack_cmd_submit() and usbip_pack_ret_submit() to map + * flags. + */ + +struct urb_to_usbip_flags { + u32 urb_flag; + u32 usbip_flag; +}; + +#define NUM_USBIP_FLAGS 17 + +static const struct urb_to_usbip_flags flag_map[NUM_USBIP_FLAGS] = { + {URB_SHORT_NOT_OK, USBIP_URB_SHORT_NOT_OK}, + {URB_ISO_ASAP, USBIP_URB_ISO_ASAP}, + {URB_NO_TRANSFER_DMA_MAP, USBIP_URB_NO_TRANSFER_DMA_MAP}, + {URB_ZERO_PACKET, USBIP_URB_ZERO_PACKET}, + {URB_NO_INTERRUPT, USBIP_URB_NO_INTERRUPT}, + {URB_FREE_BUFFER, USBIP_URB_FREE_BUFFER}, + {URB_DIR_IN, USBIP_URB_DIR_IN}, + {URB_DIR_OUT, USBIP_URB_DIR_OUT}, + {URB_DIR_MASK, USBIP_URB_DIR_MASK}, + {URB_DMA_MAP_SINGLE, USBIP_URB_DMA_MAP_SINGLE}, + {URB_DMA_MAP_PAGE, USBIP_URB_DMA_MAP_PAGE}, + {URB_DMA_MAP_SG, USBIP_URB_DMA_MAP_SG}, + {URB_MAP_LOCAL, USBIP_URB_MAP_LOCAL}, + {URB_SETUP_MAP_SINGLE, USBIP_URB_SETUP_MAP_SINGLE}, + {URB_SETUP_MAP_LOCAL, USBIP_URB_SETUP_MAP_LOCAL}, + {URB_DMA_SG_COMBINED, USBIP_URB_DMA_SG_COMBINED}, + {URB_ALIGNED_TEMP_BUFFER, USBIP_URB_ALIGNED_TEMP_BUFFER}, +}; + +static unsigned int urb_to_usbip(unsigned int flags) +{ + unsigned int map_flags = 0; + int loop; + + for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) { + if (flags & flag_map[loop].urb_flag) + map_flags |= flag_map[loop].usbip_flag; + } + + return map_flags; +} + +static unsigned int usbip_to_urb(unsigned int flags) +{ + unsigned int map_flags = 0; + int loop; + + for (loop = 0; loop < NUM_USBIP_FLAGS; loop++) { + if (flags & flag_map[loop].usbip_flag) + map_flags |= flag_map[loop].urb_flag; + } + + return map_flags; +} + static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb, int pack) { @@ -354,14 +439,14 @@ static void usbip_pack_cmd_submit(struct usbip_header *pdu, struct urb *urb, * will be discussed when usbip is ported to other operating systems. */ if (pack) { - spdu->transfer_flags = - tweak_transfer_flags(urb->transfer_flags); + /* map after tweaking the urb flags */ + spdu->transfer_flags = urb_to_usbip(tweak_transfer_flags(urb->transfer_flags)); spdu->transfer_buffer_length = urb->transfer_buffer_length; spdu->start_frame = urb->start_frame; spdu->number_of_packets = urb->number_of_packets; spdu->interval = urb->interval; } else { - urb->transfer_flags = spdu->transfer_flags; + urb->transfer_flags = usbip_to_urb(spdu->transfer_flags); urb->transfer_buffer_length = spdu->transfer_buffer_length; urb->start_frame = spdu->start_frame; urb->number_of_packets = spdu->number_of_packets; |