summaryrefslogtreecommitdiff
path: root/drivers/w1
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/w1')
-rw-r--r--drivers/w1/masters/mxc_w1.c32
1 files changed, 15 insertions, 17 deletions
diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c
index a5df5e89d456..0d05abe34362 100644
--- a/drivers/w1/masters/mxc_w1.c
+++ b/drivers/w1/masters/mxc_w1.c
@@ -15,16 +15,13 @@
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "../w1.h"
#include "../w1_int.h"
-/* According to the mx27 Datasheet the reset procedure should take up to about
- * 1350us. We set the timeout to 500*100us = 50ms for sure */
-#define MXC_W1_RESET_TIMEOUT 500
-
/*
* MXC W1 Register offsets
*/
@@ -49,24 +46,25 @@ struct mxc_w1_device {
*/
static u8 mxc_w1_ds2_reset_bus(void *data)
{
- u8 reg_val;
- unsigned int timeout_cnt = 0;
struct mxc_w1_device *dev = data;
+ unsigned long timeout;
- writeb(MXC_W1_CONTROL_RPP, (dev->regs + MXC_W1_CONTROL));
+ writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL);
- while (1) {
- reg_val = readb(dev->regs + MXC_W1_CONTROL);
+ /* Wait for reset sequence 511+512us, use 1500us for sure */
+ timeout = jiffies + usecs_to_jiffies(1500);
- if (!(reg_val & MXC_W1_CONTROL_RPP) ||
- timeout_cnt > MXC_W1_RESET_TIMEOUT)
- break;
- else
- timeout_cnt++;
+ udelay(511 + 512);
- udelay(100);
- }
- return !(reg_val & MXC_W1_CONTROL_PST);
+ do {
+ u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
+
+ /* PST bit is valid after the RPP bit is self-cleared */
+ if (!(ctrl & MXC_W1_CONTROL_RPP))
+ return !(ctrl & MXC_W1_CONTROL_PST);
+ } while (time_is_after_jiffies(timeout));
+
+ return 1;
}
/*