diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/regulator/Kconfig | 4 | ||||
-rw-r--r-- | drivers/regulator/rk808-regulator.c | 130 |
2 files changed, 132 insertions, 2 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 99b9362331b5..008ab58cd19b 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -687,11 +687,11 @@ config REGULATOR_RC5T583 outputs which can be controlled by i2c communication. config REGULATOR_RK808 - tristate "Rockchip RK808/RK818 Power regulators" + tristate "Rockchip RK805/RK808/RK818 Power regulators" depends on MFD_RK808 help Select this option to enable the power regulator of ROCKCHIP - PMIC RK808 and RK818. + PMIC RK805,RK808 and RK818. This driver supports the control of different power rails of device through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index a16d81420612..213b68743cc8 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -65,6 +65,27 @@ /* max steps for increase voltage of Buck1/2, equal 100mv*/ #define MAX_STEPS_ONE_TIME 8 +#define RK805_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \ + _vmask, _ereg, _emask, _etime) \ + [_id] = { \ + .name = (_match), \ + .supply_name = (_supply), \ + .of_match = of_match_ptr(_match), \ + .regulators_node = of_match_ptr("regulators"), \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .n_voltages = (((_max) - (_min)) / (_step) + 1), \ + .owner = THIS_MODULE, \ + .min_uV = (_min) * 1000, \ + .uV_step = (_step) * 1000, \ + .vsel_reg = (_vreg), \ + .vsel_mask = (_vmask), \ + .enable_reg = (_ereg), \ + .enable_mask = (_emask), \ + .enable_time = (_etime), \ + .ops = &rk805_reg_ops, \ + } + #define RK8XX_DESC(_id, _match, _supply, _min, _max, _step, _vreg, \ _vmask, _ereg, _emask, _etime) \ [_id] = { \ @@ -298,6 +319,28 @@ static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv) sel); } +static int rk805_set_suspend_enable(struct regulator_dev *rdev) +{ + unsigned int reg; + + reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; + + return regmap_update_bits(rdev->regmap, reg, + rdev->desc->enable_mask, + rdev->desc->enable_mask); +} + +static int rk805_set_suspend_disable(struct regulator_dev *rdev) +{ + unsigned int reg; + + reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET; + + return regmap_update_bits(rdev->regmap, reg, + rdev->desc->enable_mask, + 0); +} + static int rk808_set_suspend_enable(struct regulator_dev *rdev) { unsigned int reg; @@ -320,6 +363,27 @@ static int rk808_set_suspend_disable(struct regulator_dev *rdev) rdev->desc->enable_mask); } +static struct regulator_ops rk805_reg_ops = { + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_voltage = rk808_set_suspend_voltage, + .set_suspend_enable = rk805_set_suspend_enable, + .set_suspend_disable = rk805_set_suspend_disable, +}; + +static struct regulator_ops rk805_switch_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_suspend_enable = rk805_set_suspend_enable, + .set_suspend_disable = rk805_set_suspend_disable, +}; + static struct regulator_ops rk808_buck1_2_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, @@ -369,6 +433,68 @@ static struct regulator_ops rk808_switch_ops = { .set_suspend_disable = rk808_set_suspend_disable, }; +static const struct regulator_desc rk805_reg[] = { + { + .name = "DCDC_REG1", + .supply_name = "vcc1", + .of_match = of_match_ptr("DCDC_REG1"), + .regulators_node = of_match_ptr("regulators"), + .id = RK805_ID_DCDC1, + .ops = &rk805_reg_ops, + .type = REGULATOR_VOLTAGE, + .min_uV = 712500, + .uV_step = 12500, + .n_voltages = 64, + .vsel_reg = RK805_BUCK1_ON_VSEL_REG, + .vsel_mask = RK818_BUCK_VSEL_MASK, + .enable_reg = RK805_DCDC_EN_REG, + .enable_mask = BIT(0), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG2", + .supply_name = "vcc2", + .of_match = of_match_ptr("DCDC_REG2"), + .regulators_node = of_match_ptr("regulators"), + .id = RK805_ID_DCDC2, + .ops = &rk805_reg_ops, + .type = REGULATOR_VOLTAGE, + .min_uV = 712500, + .uV_step = 12500, + .n_voltages = 64, + .vsel_reg = RK805_BUCK2_ON_VSEL_REG, + .vsel_mask = RK818_BUCK_VSEL_MASK, + .enable_reg = RK805_DCDC_EN_REG, + .enable_mask = BIT(1), + .owner = THIS_MODULE, + }, { + .name = "DCDC_REG3", + .supply_name = "vcc3", + .of_match = of_match_ptr("DCDC_REG3"), + .regulators_node = of_match_ptr("regulators"), + .id = RK805_ID_DCDC3, + .ops = &rk805_switch_ops, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .enable_reg = RK805_DCDC_EN_REG, + .enable_mask = BIT(2), + .owner = THIS_MODULE, + }, + + RK805_DESC(RK805_ID_DCDC4, "DCDC_REG4", "vcc4", 800, 3400, 100, + RK805_BUCK4_ON_VSEL_REG, RK818_BUCK4_VSEL_MASK, + RK805_DCDC_EN_REG, BIT(3), 0), + + RK805_DESC(RK805_ID_LDO1, "LDO_REG1", "vcc5", 800, 3400, 100, + RK805_LDO1_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, + BIT(0), 400), + RK805_DESC(RK805_ID_LDO2, "LDO_REG2", "vcc5", 800, 3400, 100, + RK805_LDO2_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, + BIT(1), 400), + RK805_DESC(RK805_ID_LDO3, "LDO_REG3", "vcc6", 800, 3400, 100, + RK805_LDO3_ON_VSEL_REG, RK818_LDO_VSEL_MASK, RK805_LDO_EN_REG, + BIT(2), 400), +}; + static const struct regulator_desc rk808_reg[] = { { .name = "DCDC_REG1", @@ -625,6 +751,10 @@ static int rk808_regulator_probe(struct platform_device *pdev) platform_set_drvdata(pdev, pdata); switch (rk808->variant) { + case RK805_ID: + regulators = rk805_reg; + nregulators = RK805_NUM_REGULATORS; + break; case RK808_ID: regulators = rk808_reg; nregulators = RK808_NUM_REGULATORS; |