diff options
Diffstat (limited to 'drivers')
42 files changed, 1462 insertions, 547 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index 44710267d669..c232054fddd6 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -40,14 +40,6 @@ config I2C_BOARDINFO bool default y -config I2C_COMPAT - bool "Enable compatibility bits for old user-space" - default y - help - Say Y here if you intend to run lm-sensors 3.1.1 or older, or any - other user-space package which expects i2c adapters to be class - devices. If you don't know, say Y. - config I2C_CHARDEV tristate "I2C device interface" help diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index a22f9125322a..53f18b351f53 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -559,28 +559,33 @@ config I2C_DAVINCI For details please see http://www.ti.com/davinci config I2C_DESIGNWARE_CORE - tristate + tristate "Synopsys DesignWare I2C adapter" select REGMAP + help + This option enables support for the Synopsys DesignWare I2C adapter. + This driver includes support for the I2C host on the Synopsys + Designware I2C adapter. + + To compile the driver as a module, choose M here: the module will be + called i2c-designware-core. + +if I2C_DESIGNWARE_CORE config I2C_DESIGNWARE_SLAVE bool "Synopsys DesignWare Slave" - depends on I2C_DESIGNWARE_CORE select I2C_SLAVE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C slave adapter. - This is not a standalone module, this module compiles together with - i2c-designware-core. - config I2C_DESIGNWARE_PLATFORM - tristate "Synopsys DesignWare Platform" + tristate "Synopsys DesignWare Platform driver" depends on (ACPI && COMMON_CLK) || !ACPI - select I2C_DESIGNWARE_CORE select MFD_SYSCON if MIPS_BAIKAL_T1 + default I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the - Synopsys DesignWare I2C adapter. + Synopsys DesignWare I2C adapters on the platform bus. This driver can also be built as a module. If so, the module will be called i2c-designware-platform. @@ -613,17 +618,19 @@ config I2C_DESIGNWARE_BAYTRAIL a BayTrail system using the AXP288. config I2C_DESIGNWARE_PCI - tristate "Synopsys DesignWare PCI" + tristate "Synopsys DesignWare PCI driver" depends on PCI - select I2C_DESIGNWARE_CORE select I2C_CCGX_UCSI help If you say yes to this option, support will be included for the - Synopsys DesignWare I2C adapter. Only master mode is supported. + Synopsys DesignWare I2C adapters on the PCI bus. Only master mode is + supported. This driver can also be built as a module. If so, the module will be called i2c-designware-pci. +endif + config I2C_DIGICOLOR tristate "Conexant Digicolor I2C driver" depends on ARCH_DIGICOLOR || COMPILE_TEST @@ -772,6 +779,17 @@ config I2C_JZ4780 If you don't know what to do here, say N. +config I2C_KEBA + tristate "KEBA I2C controller support" + depends on HAS_IOMEM + select AUXILIARY_BUS + help + This driver supports the I2C controller found in KEBA system FPGA + devices. + + This driver can also be built as a module. If so, the module + will be called i2c-keba. + config I2C_KEMPLD tristate "Kontron COM I2C Controller" depends on MFD_KEMPLD diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 78d0561339e5..ecc07c50f2a0 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -76,6 +76,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o obj-$(CONFIG_I2C_IMX_LPI2C) += i2c-imx-lpi2c.o obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o +obj-$(CONFIG_I2C_KEBA) += i2c-keba.o obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o obj-$(CONFIG_I2C_LS2X) += i2c-ls2x.o diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 9d7b4efe26ad..544c94e86b89 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -479,9 +479,8 @@ static struct i2c_adapter ali1535_adapter = { static const struct pci_device_id ali1535_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, - { }, + { } }; - MODULE_DEVICE_TABLE(pci, ali1535_ids); static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c index d3ac1c77a509..6f0ef587e76d 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-plat.c +++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c @@ -340,7 +340,7 @@ static void i2c_amd_remove(struct platform_device *pdev) static const struct acpi_device_id i2c_amd_acpi_match[] = { { "AMDI0011" }, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, i2c_amd_acpi_match); diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index 2a03a221e2dd..cc5a26637fd5 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -991,7 +991,7 @@ static const struct of_device_id aspeed_i2c_bus_of_table[] = { .compatible = "aspeed,ast2600-i2c-bus", .data = aspeed_i2c_25xx_get_clk_reg_val, }, - { }, + { } }; MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c index e8a688d04aee..080204182bb5 100644 --- a/drivers/i2c/busses/i2c-designware-common.c +++ b/drivers/i2c/busses/i2c-designware-common.c @@ -20,12 +20,17 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/swab.h> #include <linux/types.h> #include <linux/units.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW_COMMON + #include "i2c-designware-core.h" static char *abort_sources[] = { @@ -188,7 +193,7 @@ static const u32 supported_speeds[] = { I2C_MAX_STANDARD_MODE_FREQ, }; -int i2c_dw_validate_speed(struct dw_i2c_dev *dev) +static int i2c_dw_validate_speed(struct dw_i2c_dev *dev) { struct i2c_timings *t = &dev->timings; unsigned int i; @@ -208,7 +213,44 @@ int i2c_dw_validate_speed(struct dw_i2c_dev *dev) return -EINVAL; } -EXPORT_SYMBOL_GPL(i2c_dw_validate_speed); + +#ifdef CONFIG_OF + +#include <linux/platform_device.h> + +#define MSCC_ICPU_CFG_TWI_DELAY 0x0 +#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) +#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 + +static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev) +{ + writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE, + dev->ext + MSCC_ICPU_CFG_TWI_DELAY); + + return 0; +} + +static void i2c_dw_of_configure(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + switch (dev->flags & MODEL_MASK) { + case MODEL_MSCC_OCELOT: + dev->ext = devm_platform_ioremap_resource(pdev, 1); + if (!IS_ERR(dev->ext)) + dev->set_sda_hold_time = mscc_twi_set_sda_hold_time; + break; + default: + break; + } +} + +#else /* CONFIG_OF */ + +static inline void i2c_dw_of_configure(struct device *device) { } + +#endif /* CONFIG_OF */ #ifdef CONFIG_ACPI @@ -255,7 +297,7 @@ static void i2c_dw_acpi_params(struct device *device, char method[], kfree(buf.pointer); } -int i2c_dw_acpi_configure(struct device *device) +static void i2c_dw_acpi_configure(struct device *device) { struct dw_i2c_dev *dev = dev_get_drvdata(device); struct i2c_timings *t = &dev->timings; @@ -285,10 +327,7 @@ int i2c_dw_acpi_configure(struct device *device) dev->sda_hold_time = fs_ht; break; } - - return 0; } -EXPORT_SYMBOL_GPL(i2c_dw_acpi_configure); static u32 i2c_dw_acpi_round_bus_speed(struct device *device) { @@ -310,11 +349,13 @@ static u32 i2c_dw_acpi_round_bus_speed(struct device *device) #else /* CONFIG_ACPI */ +static inline void i2c_dw_acpi_configure(struct device *device) { } + static inline u32 i2c_dw_acpi_round_bus_speed(struct device *device) { return 0; } #endif /* CONFIG_ACPI */ -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) +static void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) { u32 acpi_speed = i2c_dw_acpi_round_bus_speed(dev->dev); struct i2c_timings *t = &dev->timings; @@ -330,10 +371,47 @@ void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev) else t->bus_freq_hz = I2C_MAX_FAST_MODE_FREQ; } -EXPORT_SYMBOL_GPL(i2c_dw_adjust_bus_speed); -u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev) +{ + struct i2c_timings *t = &dev->timings; + struct device *device = dev->dev; + struct fwnode_handle *fwnode = dev_fwnode(device); + + i2c_parse_fw_timings(device, t, false); + + i2c_dw_adjust_bus_speed(dev); + + if (is_of_node(fwnode)) + i2c_dw_of_configure(device); + else if (is_acpi_node(fwnode)) + i2c_dw_acpi_configure(device); + + return i2c_dw_validate_speed(dev); +} +EXPORT_SYMBOL_GPL(i2c_dw_fw_parse_and_configure); + +static u32 i2c_dw_read_scl_reg(struct dw_i2c_dev *dev, u32 reg) +{ + u32 val; + int ret; + + ret = i2c_dw_acquire_lock(dev); + if (ret) + return 0; + + ret = regmap_read(dev->map, reg, &val); + i2c_dw_release_lock(dev); + + return ret ? 0 : val; +} + +u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tSYMBOL, u32 tf, int cond, int offset) { + if (!ic_clk) + return i2c_dw_read_scl_reg(dev, reg); + /* * DesignWare I2C core doesn't seem to have solid strategy to meet * the tHD;STA timing spec. Configuring _HCNT based on tHIGH spec @@ -372,8 +450,12 @@ u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) 3 + offset; } -u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset) +u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tLOW, u32 tf, int offset) { + if (!ic_clk) + return i2c_dw_read_scl_reg(dev, reg); + /* * Conditional expression: * @@ -653,6 +735,84 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) i2c_dw_release_lock(dev); } +EXPORT_SYMBOL_GPL(i2c_dw_disable); + +int i2c_dw_probe(struct dw_i2c_dev *dev) +{ + device_set_node(&dev->adapter.dev, dev_fwnode(dev->dev)); + + switch (dev->mode) { + case DW_IC_SLAVE: + return i2c_dw_probe_slave(dev); + case DW_IC_MASTER: + return i2c_dw_probe_master(dev); + default: + dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(i2c_dw_probe); + +static int i2c_dw_prepare(struct device *device) +{ + /* + * If the ACPI companion device object is present for this device, + * it may be accessed during suspend and resume of other devices via + * I2C operation regions, so tell the PM core and middle layers to + * avoid skipping system suspend/resume callbacks for it in that case. + */ + return !has_acpi_companion(device); +} + +static int i2c_dw_runtime_suspend(struct device *device) +{ + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + if (dev->shared_with_punit) + return 0; + + i2c_dw_disable(dev); + i2c_dw_prepare_clk(dev, false); + + return 0; +} + +static int i2c_dw_suspend(struct device *device) +{ + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + i2c_mark_adapter_suspended(&dev->adapter); + + return i2c_dw_runtime_suspend(device); +} + +static int i2c_dw_runtime_resume(struct device *device) +{ + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + if (!dev->shared_with_punit) + i2c_dw_prepare_clk(dev, true); + + dev->init(dev); + + return 0; +} + +static int i2c_dw_resume(struct device *device) +{ + struct dw_i2c_dev *dev = dev_get_drvdata(device); + + i2c_dw_runtime_resume(device); + i2c_mark_adapter_resumed(&dev->adapter); + + return 0; +} + +EXPORT_GPL_DEV_PM_OPS(i2c_dw_dev_pm_ops) = { + .prepare = pm_sleep_ptr(i2c_dw_prepare), + LATE_SYSTEM_SLEEP_PM_OPS(i2c_dw_suspend, i2c_dw_resume) + RUNTIME_PM_OPS(i2c_dw_runtime_suspend, i2c_dw_runtime_resume, NULL) +}; MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core"); MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index e9606c00b8d1..1ac2afd03a0a 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -10,11 +10,10 @@ */ #include <linux/bits.h> -#include <linux/compiler_types.h> #include <linux/completion.h> -#include <linux/dev_printk.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/pm.h> #include <linux/regmap.h> #include <linux/types.h> @@ -237,7 +236,6 @@ struct reset_control; * @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. * @shared_with_punit: true if this bus is shared with the SoCs PUNIT - * @disable: function to disable the controller * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE @@ -295,7 +293,6 @@ struct dw_i2c_dev { void (*release_lock)(void); int semaphore_idx; bool shared_with_punit; - void (*disable)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; @@ -329,8 +326,10 @@ struct i2c_dw_semaphore_callbacks { }; int i2c_dw_init_regmap(struct dw_i2c_dev *dev); -u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); -u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tSYMBOL, u32 tf, int cond, int offset); +u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tLOW, u32 tf, int offset); int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev); int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare); @@ -340,7 +339,8 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); -void i2c_dw_disable(struct dw_i2c_dev *dev); + +extern const struct dev_pm_ops i2c_dw_dev_pm_ops; static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) { @@ -373,6 +373,7 @@ static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev, } void __i2c_dw_disable(struct dw_i2c_dev *dev); +void i2c_dw_disable(struct dw_i2c_dev *dev); extern void i2c_dw_configure_master(struct dw_i2c_dev *dev); extern int i2c_dw_probe_master(struct dw_i2c_dev *dev); @@ -385,19 +386,6 @@ static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { } static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } #endif -static inline int i2c_dw_probe(struct dw_i2c_dev *dev) -{ - switch (dev->mode) { - case DW_IC_SLAVE: - return i2c_dw_probe_slave(dev); - case DW_IC_MASTER: - return i2c_dw_probe_master(dev); - default: - dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); - return -EINVAL; - } -} - static inline void i2c_dw_configure(struct dw_i2c_dev *dev) { if (i2c_detect_slave_mode(dev->dev)) @@ -406,6 +394,8 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev) i2c_dw_configure_master(dev); } +int i2c_dw_probe(struct dw_i2c_dev *dev); + #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); #endif @@ -414,11 +404,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); #endif -int i2c_dw_validate_speed(struct dw_i2c_dev *dev); -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); - -#if IS_ENABLED(CONFIG_ACPI) -int i2c_dw_acpi_configure(struct device *device); -#else -static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } -#endif +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev); diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c index c7e56002809a..e46f1b22c360 100644 --- a/drivers/i2c/busses/i2c-designware-master.c +++ b/drivers/i2c/busses/i2c-designware-master.c @@ -22,6 +22,8 @@ #include <linux/regmap.h> #include <linux/reset.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW + #include "i2c-designware-core.h" #define AMD_TIMEOUT_MIN_US 25 @@ -64,13 +66,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) if (!dev->ss_hcnt || !dev->ss_lcnt) { ic_clk = i2c_dw_clk_rate(dev); dev->ss_hcnt = - i2c_dw_scl_hcnt(ic_clk, + i2c_dw_scl_hcnt(dev, + DW_IC_SS_SCL_HCNT, + ic_clk, 4000, /* tHD;STA = tHIGH = 4.0 us */ sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ dev->ss_lcnt = - i2c_dw_scl_lcnt(ic_clk, + i2c_dw_scl_lcnt(dev, + DW_IC_SS_SCL_LCNT, + ic_clk, 4700, /* tLOW = 4.7 us */ scl_falling_time, 0); /* No offset */ @@ -94,13 +100,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) } else { ic_clk = i2c_dw_clk_rate(dev); dev->fs_hcnt = - i2c_dw_scl_hcnt(ic_clk, + i2c_dw_scl_hcnt(dev, + DW_IC_FS_SCL_HCNT, + ic_clk, 260, /* tHIGH = 260 ns */ sda_falling_time, 0, /* DW default */ 0); /* No offset */ dev->fs_lcnt = - i2c_dw_scl_lcnt(ic_clk, + i2c_dw_scl_lcnt(dev, + DW_IC_FS_SCL_LCNT, + ic_clk, 500, /* tLOW = 500 ns */ scl_falling_time, 0); /* No offset */ @@ -114,13 +124,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) if (!dev->fs_hcnt || !dev->fs_lcnt) { ic_clk = i2c_dw_clk_rate(dev); dev->fs_hcnt = - i2c_dw_scl_hcnt(ic_clk, + i2c_dw_scl_hcnt(dev, + DW_IC_FS_SCL_HCNT, + ic_clk, 600, /* tHD;STA = tHIGH = 0.6 us */ sda_falling_time, 0, /* 0: DW default, 1: Ideal */ 0); /* No offset */ dev->fs_lcnt = - i2c_dw_scl_lcnt(ic_clk, + i2c_dw_scl_lcnt(dev, + DW_IC_FS_SCL_LCNT, + ic_clk, 1300, /* tLOW = 1.3 us */ scl_falling_time, 0); /* No offset */ @@ -142,13 +156,17 @@ static int i2c_dw_set_timings_master(struct dw_i2c_dev *dev) } else if (!dev->hs_hcnt || !dev->hs_lcnt) { ic_clk = i2c_dw_clk_rate(dev); dev->hs_hcnt = - i2c_dw_scl_hcnt(ic_clk, + i2c_dw_scl_hcnt(dev, + DW_IC_HS_SCL_HCNT, + ic_clk, 160, /* tHIGH = 160 ns */ sda_falling_time, 0, /* DW default */ 0); /* No offset */ dev->hs_lcnt = - i2c_dw_scl_lcnt(ic_clk, + i2c_dw_scl_lcnt(dev, + DW_IC_HS_SCL_LCNT, + ic_clk, 320, /* tLOW = 320 ns */ scl_falling_time, 0); /* No offset */ @@ -931,7 +949,6 @@ int i2c_dw_probe_master(struct dw_i2c_dev *dev) init_completion(&dev->cmd_complete); dev->init = i2c_dw_init_master; - dev->disable = i2c_dw_disable; ret = i2c_dw_init_regmap(dev); if (ret) @@ -1021,3 +1038,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_master); MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(I2C_DW_COMMON); diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index a1b379a1e904..7b2c5d71a7fc 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -9,7 +9,6 @@ * Copyright (C) 2009 Provigent Ltd. * Copyright (C) 2011, 2015, 2016 Intel Corporation. */ -#include <linux/acpi.h> #include <linux/delay.h> #include <linux/err.h> #include <linux/errno.h> @@ -19,6 +18,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/pm.h> #include <linux/pm_runtime.h> #include <linux/power_supply.h> #include <linux/sched.h> @@ -102,7 +102,7 @@ static u32 mfld_get_clk_rate_khz(struct dw_i2c_dev *dev) static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { - struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); + struct dw_i2c_dev *dev = pci_get_drvdata(pdev); switch (pdev->device) { case 0x0817: @@ -152,7 +152,7 @@ static u32 navi_amd_get_clk_rate_khz(struct dw_i2c_dev *dev) static int navi_amd_setup(struct pci_dev *pdev, struct dw_pci_controller *c) { - struct dw_i2c_dev *dev = dev_get_drvdata(&pdev->dev); + struct dw_i2c_dev *dev = pci_get_drvdata(pdev); dev->flags |= MODEL_AMD_NAVI_GPU | ACCESS_POLLING; dev->timings.bus_freq_hz = I2C_MAX_STANDARD_MODE_FREQ; @@ -194,47 +194,6 @@ static struct dw_pci_controller dw_pci_controllers[] = { }, }; -static int __maybe_unused i2c_dw_pci_runtime_suspend(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - i_dev->disable(i_dev); - return 0; -} - -static int __maybe_unused i2c_dw_pci_suspend(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - i2c_mark_adapter_suspended(&i_dev->adapter); - - return i2c_dw_pci_runtime_suspend(dev); -} - -static int __maybe_unused i2c_dw_pci_runtime_resume(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - return i_dev->init(i_dev); -} - -static int __maybe_unused i2c_dw_pci_resume(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - int ret; - - ret = i2c_dw_pci_runtime_resume(dev); - - i2c_mark_adapter_resumed(&i_dev->adapter); - - return ret; -} - -static const struct dev_pm_ops i2c_dw_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(i2c_dw_pci_suspend, i2c_dw_pci_resume) - SET_RUNTIME_PM_OPS(i2c_dw_pci_runtime_suspend, i2c_dw_pci_runtime_resume, NULL) -}; - static const struct property_entry dgpu_properties[] = { /* USB-C doesn't power the system */ PROPERTY_ENTRY_U8("scope", POWER_SUPPLY_SCOPE_DEVICE), @@ -253,7 +212,6 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, int r; struct dw_pci_controller *controller; struct dw_scl_sda_cfg *cfg; - struct i2c_timings *t; if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) return dev_err_probe(&pdev->dev, -EINVAL, @@ -288,29 +246,17 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, dev->irq = pci_irq_vector(pdev, 0); dev->flags |= controller->flags; - t = &dev->timings; - i2c_parse_fw_timings(&pdev->dev, t, false); - pci_set_drvdata(pdev, dev); if (controller->setup) { r = controller->setup(pdev, controller); - if (r) { - pci_free_irq_vectors(pdev); + if (r) return r; - } } - i2c_dw_adjust_bus_speed(dev); - - if (has_acpi_companion(&pdev->dev)) - i2c_dw_acpi_configure(&pdev->dev); - - r = i2c_dw_validate_speed(dev); - if (r) { - pci_free_irq_vectors(pdev); + r = i2c_dw_fw_parse_and_configure(dev); + if (r) return r; - } i2c_dw_configure(dev); @@ -326,14 +272,11 @@ static int i2c_dw_pci_probe(struct pci_dev *pdev, adap = &dev->adapter; adap->owner = THIS_MODULE; adap->class = 0; - ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); adap->nr = controller->bus_num; r = i2c_dw_probe(dev); - if (r) { - pci_free_irq_vectors(pdev); + if (r) return r; - } if ((dev->flags & MODEL_MASK) == MODEL_AMD_NAVI_GPU) { dev->slave = i2c_new_ccgx_ucsi(&dev->adapter, dev->irq, &dgpu_node); @@ -354,16 +297,15 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev) { struct dw_i2c_dev *dev = pci_get_drvdata(pdev); - dev->disable(dev); + i2c_dw_disable(dev); + pm_runtime_forbid(&pdev->dev); pm_runtime_get_noresume(&pdev->dev); i2c_del_adapter(&dev->adapter); - devm_free_irq(&pdev->dev, dev->irq, dev); - pci_free_irq_vectors(pdev); } -static const struct pci_device_id i2_designware_pci_ids[] = { +static const struct pci_device_id i2c_designware_pci_ids[] = { /* Medfield */ { PCI_VDEVICE(INTEL, 0x0817), medfield }, { PCI_VDEVICE(INTEL, 0x0818), medfield }, @@ -409,21 +351,23 @@ static const struct pci_device_id i2_designware_pci_ids[] = { { PCI_VDEVICE(ATI, 0x73c4), navi_amd }, { PCI_VDEVICE(ATI, 0x7444), navi_amd }, { PCI_VDEVICE(ATI, 0x7464), navi_amd }, - { 0,} + {} }; -MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids); +MODULE_DEVICE_TABLE(pci, i2c_designware_pci_ids); static struct pci_driver dw_i2c_driver = { .name = DRIVER_NAME, - .id_table = i2_designware_pci_ids, .probe = i2c_dw_pci_probe, .remove = i2c_dw_pci_remove, .driver = { - .pm = &i2c_dw_pm_ops, + .pm = pm_ptr(&i2c_dw_dev_pm_ops), }, + .id_table = i2c_designware_pci_ids, }; module_pci_driver(dw_i2c_driver); MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(I2C_DW); +MODULE_IMPORT_NS(I2C_DW_COMMON); diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index df3dc1e8093e..2d0c7348e491 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -8,7 +8,6 @@ * Copyright (C) 2007 MontaVista Software Inc. * Copyright (C) 2009 Provigent Ltd. */ -#include <linux/acpi.h> #include <linux/clk-provider.h> #include <linux/clk.h> #include <linux/delay.h> @@ -21,7 +20,6 @@ #include <linux/kernel.h> #include <linux/mfd/syscon.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/pm_runtime.h> @@ -30,7 +28,6 @@ #include <linux/reset.h> #include <linux/sched.h> #include <linux/slab.h> -#include <linux/suspend.h> #include <linux/units.h> #include "i2c-designware-core.h" @@ -40,29 +37,6 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev) return clk_get_rate(dev->clk) / KILO; } -#ifdef CONFIG_ACPI -static const struct acpi_device_id dw_i2c_acpi_match[] = { - { "INT33C2", 0 }, - { "INT33C3", 0 }, - { "INT3432", 0 }, - { "INT3433", 0 }, - { "INTC10EF", 0 }, - { "80860F41", ACCESS_NO_IRQ_SUSPEND }, - { "808622C1", ACCESS_NO_IRQ_SUSPEND }, - { "AMD0010", ACCESS_INTR_MASK }, - { "AMDI0010", ACCESS_INTR_MASK }, - { "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE }, - { "AMDI0510", 0 }, - { "APMC0D0F", 0 }, - { "HISI02A1", 0 }, - { "HISI02A2", 0 }, - { "HISI02A3", 0 }, - { "HYGO0010", ACCESS_INTR_MASK }, - { } -}; -MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); -#endif - #ifdef CONFIG_OF #define BT1_I2C_CTL 0x100 #define BT1_I2C_CTL_ADDR_MASK GENMASK(7, 0) @@ -120,53 +94,11 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg); return PTR_ERR_OR_ZERO(dev->map); } - -#define MSCC_ICPU_CFG_TWI_DELAY 0x0 -#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE BIT(0) -#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER 0x4 - -static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev) -{ - writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE, - dev->ext + MSCC_ICPU_CFG_TWI_DELAY); - - return 0; -} - -static int dw_i2c_of_configure(struct platform_device *pdev) -{ - struct dw_i2c_dev *dev = platform_get_drvdata(pdev); - - switch (dev->flags & MODEL_MASK) { - case MODEL_MSCC_OCELOT: - dev->ext = devm_platform_ioremap_resource(pdev, 1); - if (!IS_ERR(dev->ext)) - dev->set_sda_hold_time = mscc_twi_set_sda_hold_time; - break; - default: - break; - } - - return 0; -} - -static const struct of_device_id dw_i2c_of_match[] = { - { .compatible = "snps,designware-i2c", }, - { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, - { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, - {}, -}; -MODULE_DEVICE_TABLE(of, dw_i2c_of_match); #else static int bt1_i2c_request_regs(struct dw_i2c_dev *dev) { return -ENODEV; } - -static inline int dw_i2c_of_configure(struct platform_device *pdev) -{ - return -ENODEV; -} #endif static int txgbe_i2c_request_regs(struct dw_i2c_dev *dev) @@ -238,11 +170,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) int i = 0; int ret; - ptr = i2c_dw_semaphore_cb_table; - dev->semaphore_idx = -1; - while (ptr->probe) { + for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) { ret = ptr->probe(dev); if (ret) { /* @@ -254,7 +184,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) return ret; i++; - ptr++; continue; } @@ -278,7 +207,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) { struct i2c_adapter *adap; struct dw_i2c_dev *dev; - struct i2c_timings *t; int irq, ret; irq = platform_get_irq(pdev, 0); @@ -307,18 +235,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) reset_control_deassert(dev->rst); - t = &dev->timings; - i2c_parse_fw_timings(&pdev->dev, t, false); - - i2c_dw_adjust_bus_speed(dev); - - if (pdev->dev.of_node) - dw_i2c_of_configure(pdev); - - if (has_acpi_companion(&pdev->dev)) - i2c_dw_acpi_configure(&pdev->dev); - - ret = i2c_dw_validate_speed(dev); + ret = i2c_dw_fw_parse_and_configure(dev); if (ret) goto exit_reset; @@ -346,6 +263,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) goto exit_reset; if (dev->clk) { + struct i2c_timings *t = &dev->timings; u64 clk_khz; dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz; @@ -360,8 +278,6 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ? I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED; - ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev)); - adap->dev.of_node = pdev->dev.of_node; adap->nr = -1; if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { @@ -408,7 +324,7 @@ static void dw_i2c_plat_remove(struct platform_device *pdev) i2c_del_adapter(&dev->adapter); - dev->disable(dev); + i2c_dw_disable(dev); pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); @@ -419,66 +335,34 @@ static void dw_i2c_plat_remove(struct platform_device *pdev) reset_control_assert(dev->rst); } -static int dw_i2c_plat_prepare(struct device *dev) -{ - /* - * If the ACPI companion device object is present for this device, it - * may be accessed during suspend and resume of other devices via I2C - * operation regions, so tell the PM core and middle layers to avoid - * skipping system suspend/resume callbacks for it in that case. - */ - return !has_acpi_companion(dev); -} - -static int dw_i2c_plat_runtime_suspend(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - if (i_dev->shared_with_punit) - return 0; - - i_dev->disable(i_dev); - i2c_dw_prepare_clk(i_dev, false); - - return 0; -} - -static int dw_i2c_plat_suspend(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - i2c_mark_adapter_suspended(&i_dev->adapter); - - return dw_i2c_plat_runtime_suspend(dev); -} - -static int dw_i2c_plat_runtime_resume(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - if (!i_dev->shared_with_punit) - i2c_dw_prepare_clk(i_dev, true); - - i_dev->init(i_dev); - - return 0; -} - -static int dw_i2c_plat_resume(struct device *dev) -{ - struct dw_i2c_dev *i_dev = dev_get_drvdata(dev); - - dw_i2c_plat_runtime_resume(dev); - i2c_mark_adapter_resumed(&i_dev->adapter); - - return 0; -} +static const struct of_device_id dw_i2c_of_match[] = { + { .compatible = "snps,designware-i2c", }, + { .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT }, + { .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 }, + {} +}; +MODULE_DEVICE_TABLE(of, dw_i2c_of_match); -static const struct dev_pm_ops dw_i2c_dev_pm_ops = { - .prepare = pm_sleep_ptr(dw_i2c_plat_prepare), - LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume) - RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL) +static const struct acpi_device_id dw_i2c_acpi_match[] = { + { "80860F41", ACCESS_NO_IRQ_SUSPEND }, + { "808622C1", ACCESS_NO_IRQ_SUSPEND }, + { "AMD0010", ACCESS_INTR_MASK }, + { "AMDI0010", ACCESS_INTR_MASK }, + { "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE }, + { "AMDI0510", 0 }, + { "APMC0D0F", 0 }, + { "HISI02A1", 0 }, + { "HISI02A2", 0 }, + { "HISI02A3", 0 }, + { "HYGO0010", ACCESS_INTR_MASK }, + { "INT33C2", 0 }, + { "INT33C3", 0 }, + { "INT3432", 0 }, + { "INT3433", 0 }, + { "INTC10EF", 0 }, + {} }; +MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match); static const struct platform_device_id dw_i2c_platform_ids[] = { { "i2c_designware" }, @@ -491,9 +375,9 @@ static struct platform_driver dw_i2c_driver = { .remove_new = dw_i2c_plat_remove, .driver = { .name = "i2c_designware", - .of_match_table = of_match_ptr(dw_i2c_of_match), - .acpi_match_table = ACPI_PTR(dw_i2c_acpi_match), - .pm = pm_ptr(&dw_i2c_dev_pm_ops), + .of_match_table = dw_i2c_of_match, + .acpi_match_table = dw_i2c_acpi_match, + .pm = pm_ptr(&i2c_dw_dev_pm_ops), }, .id_table = dw_i2c_platform_ids, }; @@ -513,3 +397,5 @@ module_exit(dw_i2c_exit_driver); MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>"); MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter"); MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS(I2C_DW); +MODULE_IMPORT_NS(I2C_DW_COMMON); diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c index 78e2c47e3d7d..7035296aa24c 100644 --- a/drivers/i2c/busses/i2c-designware-slave.c +++ b/drivers/i2c/busses/i2c-designware-slave.c @@ -16,6 +16,8 @@ #include <linux/pm_runtime.h> #include <linux/regmap.h> +#define DEFAULT_SYMBOL_NAMESPACE I2C_DW + #include "i2c-designware-core.h" static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev) @@ -88,7 +90,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave) struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter); regmap_write(dev->map, DW_IC_INTR_MASK, 0); - dev->disable(dev); + i2c_dw_disable(dev); synchronize_irq(dev->irq); dev->slave = NULL; pm_runtime_put(dev->dev); @@ -235,7 +237,6 @@ int i2c_dw_probe_slave(struct dw_i2c_dev *dev) int ret; dev->init = i2c_dw_init_slave; - dev->disable = i2c_dw_disable; ret = i2c_dw_init_regmap(dev); if (ret) @@ -279,3 +280,4 @@ EXPORT_SYMBOL_GPL(i2c_dw_probe_slave); MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>"); MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(I2C_DW_COMMON); diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c index 3e6b80e59b90..3dc5a46698fc 100644 --- a/drivers/i2c/busses/i2c-digicolor.c +++ b/drivers/i2c/busses/i2c-digicolor.c @@ -357,7 +357,7 @@ static void dc_i2c_remove(struct platform_device *pdev) static const struct of_device_id dc_i2c_match[] = { { .compatible = "cnxt,cx92755-i2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, dc_i2c_match); diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c index 557409410445..d08be3f3cede 100644 --- a/drivers/i2c/busses/i2c-emev2.c +++ b/drivers/i2c/busses/i2c-emev2.c @@ -67,7 +67,6 @@ struct em_i2c_device { void __iomem *base; struct i2c_adapter adap; struct completion msg_done; - struct clk *sclk; struct i2c_client *slave; int irq; }; @@ -361,6 +360,7 @@ static const struct i2c_algorithm em_i2c_algo = { static int em_i2c_probe(struct platform_device *pdev) { struct em_i2c_device *priv; + struct clk *sclk; int ret; priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); @@ -373,13 +373,9 @@ static int em_i2c_probe(struct platform_device *pdev) strscpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name)); - priv->sclk = devm_clk_get(&pdev->dev, "sclk"); - if (IS_ERR(priv->sclk)) - return PTR_ERR(priv->sclk); - - ret = clk_prepare_enable(priv->sclk); - if (ret) - return ret; + sclk = devm_clk_get_enabled(&pdev->dev, "sclk"); + if (IS_ERR(sclk)) + return PTR_ERR(sclk); priv->adap.timeout = msecs_to_jiffies(100); priv->adap.retries = 5; @@ -397,26 +393,22 @@ static int em_i2c_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (ret < 0) - goto err_clk; + return ret; priv->irq = ret; + ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0, "em_i2c", priv); if (ret) - goto err_clk; + return ret; ret = i2c_add_adapter(&priv->adap); - if (ret) - goto err_clk; + return ret; dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr, priv->irq); return 0; - -err_clk: - clk_disable_unprepare(priv->sclk); - return ret; } static void em_i2c_remove(struct platform_device *dev) @@ -424,7 +416,6 @@ static void em_i2c_remove(struct platform_device *dev) struct em_i2c_device *priv = platform_get_drvdata(dev); i2c_del_adapter(&priv->adap); - clk_disable_unprepare(priv->sclk); } static const struct of_device_id em_i2c_ids[] = { diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 328c0dab6b14..299fe9d3afab 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -1763,8 +1763,15 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) i801_add_tco(priv); + /* + * adapter.name is used by platform code to find the main I801 adapter + * to instantiante i2c_clients, do not change. + */ snprintf(priv->adapter.name, sizeof(priv->adapter.name), - "SMBus I801 adapter at %04lx", priv->smba); + "SMBus %s adapter at %04lx", + (priv->features & FEATURE_IDF) ? "I801 IDF" : "I801", + priv->smba); + err = i2c_add_adapter(&priv->adapter); if (err) { platform_device_unregister(priv->tco_pdev); diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 0197786892a2..976d43f73f38 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -559,7 +559,7 @@ static const struct i2c_algorithm lpi2c_imx_algo = { static const struct of_device_id lpi2c_imx_of_match[] = { { .compatible = "fsl,imx7ulp-lpi2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match); diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 3842e527116b..98539313cbc9 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -687,7 +687,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx, bool atomic) i2c_imx_bus_busy(i2c_imx, 0, atomic); /* Disable I2C controller */ - temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN, + temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN; imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR); } @@ -1549,7 +1549,7 @@ static void i2c_imx_remove(struct platform_device *pdev) pm_runtime_disable(&pdev->dev); } -static int __maybe_unused i2c_imx_runtime_suspend(struct device *dev) +static int i2c_imx_runtime_suspend(struct device *dev) { struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); @@ -1558,7 +1558,7 @@ static int __maybe_unused i2c_imx_runtime_suspend(struct device *dev) return 0; } -static int __maybe_unused i2c_imx_runtime_resume(struct device *dev) +static int i2c_imx_runtime_resume(struct device *dev) { struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev); int ret; @@ -1571,8 +1571,7 @@ static int __maybe_unused i2c_imx_runtime_resume(struct device *dev) } static const struct dev_pm_ops i2c_imx_pm_ops = { - SET_RUNTIME_PM_OPS(i2c_imx_runtime_suspend, - i2c_imx_runtime_resume, NULL) + RUNTIME_PM_OPS(i2c_imx_runtime_suspend, i2c_imx_runtime_resume, NULL) }; static struct platform_driver i2c_imx_driver = { @@ -1580,7 +1579,7 @@ static struct platform_driver i2c_imx_driver = { .remove_new = i2c_imx_remove, .driver = { .name = DRIVER_NAME, - .pm = &i2c_imx_pm_ops, + .pm = pm_ptr(&i2c_imx_pm_ops), .of_match_table = i2c_imx_dt_ids, .acpi_match_table = i2c_imx_acpi_ids, }, diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 655b5d851c48..c93c02aa6ac8 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -382,6 +382,15 @@ static int ismt_process_desc(const struct ismt_desc *desc, } /** + * ismt_kill_transaction() - kill current transaction + * @priv: iSMT private data + */ +static void ismt_kill_transaction(struct ismt_priv *priv) +{ + writel(ISMT_GCTRL_KILL, priv->smba + ISMT_GR_GCTRL); +} + +/** * ismt_access() - process an SMBus command * @adap: the i2c host adapter * @addr: address of the i2c/SMBus target @@ -623,6 +632,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr, dma_unmap_single(dev, dma_addr, dma_size, dma_direction); if (unlikely(!time_left)) { + ismt_kill_transaction(priv); ret = -ETIMEDOUT; goto out; } diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c index 4aafdfab6305..92cc5b091137 100644 --- a/drivers/i2c/busses/i2c-jz4780.c +++ b/drivers/i2c/busses/i2c-jz4780.c @@ -792,26 +792,22 @@ static int jz4780_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, i2c); - i2c->clk = devm_clk_get(&pdev->dev, NULL); + i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL); if (IS_ERR(i2c->clk)) return PTR_ERR(i2c->clk); - ret = clk_prepare_enable(i2c->clk); - if (ret) - return ret; - ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &clk_freq); if (ret) { dev_err(&pdev->dev, "clock-frequency not specified in DT\n"); - goto err; + return ret; } i2c->speed = clk_freq / 1000; if (i2c->speed == 0) { ret = -EINVAL; dev_err(&pdev->dev, "clock-frequency minimum is 1000\n"); - goto err; + return ret; } jz4780_i2c_set_speed(i2c); @@ -827,29 +823,25 @@ static int jz4780_i2c_probe(struct platform_device *pdev) ret = platform_get_irq(pdev, 0); if (ret < 0) - goto err; + return ret; i2c->irq = ret; + ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0, dev_name(&pdev->dev), i2c); if (ret) - goto err; + return ret; ret = i2c_add_adapter(&i2c->adap); if (ret < 0) - goto err; + return ret; return 0; - -err: - clk_disable_unprepare(i2c->clk); - return ret; } static void jz4780_i2c_remove(struct platform_device *pdev) { struct jz4780_i2c *i2c = platform_get_drvdata(pdev); - clk_disable_unprepare(i2c->clk); i2c_del_adapter(&i2c->adap); } diff --git a/drivers/i2c/busses/i2c-keba.c b/drivers/i2c/busses/i2c-keba.c new file mode 100644 index 000000000000..759732a07ef0 --- /dev/null +++ b/drivers/i2c/busses/i2c-keba.c @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) KEBA Industrial Automation Gmbh 2024 + * + * Driver for KEBA I2C controller FPGA IP core + */ + +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/module.h> +#include <linux/misc/keba.h> + +#define KI2C "i2c-keba" + +#define KI2C_CAPABILITY_REG 0x02 +#define KI2C_CAPABILITY_CRYPTO 0x01 +#define KI2C_CAPABILITY_DC 0x02 + +#define KI2C_CONTROL_REG 0x04 +#define KI2C_CONTROL_MEN 0x01 +#define KI2C_CONTROL_MSTA 0x02 +#define KI2C_CONTROL_RSTA 0x04 +#define KI2C_CONTROL_MTX 0x08 +#define KI2C_CONTROL_TXAK 0x10 +#define KI2C_CONTROL_DISABLE 0x00 + +#define KI2C_CONTROL_DC_REG 0x05 +#define KI2C_CONTROL_DC_SDA 0x01 +#define KI2C_CONTROL_DC_SCL 0x02 + +#define KI2C_STATUS_REG 0x08 +#define KI2C_STATUS_IN_USE 0x01 +#define KI2C_STATUS_ACK_CYC 0x02 +#define KI2C_STATUS_RXAK 0x04 +#define KI2C_STATUS_MCF 0x08 + +#define KI2C_STATUS_DC_REG 0x09 +#define KI2C_STATUS_DC_SDA 0x01 +#define KI2C_STATUS_DC_SCL 0x02 + +#define KI2C_DATA_REG 0x0c + +#define KI2C_INUSE_SLEEP_US (2 * USEC_PER_MSEC) +#define KI2C_INUSE_TIMEOUT_US (10 * USEC_PER_SEC) + +#define KI2C_POLL_DELAY_US 5 + +struct ki2c { + struct keba_i2c_auxdev *auxdev; + void __iomem *base; + struct i2c_adapter adapter; + + struct i2c_client **client; + int client_size; +}; + +static int ki2c_inuse_lock(struct ki2c *ki2c) +{ + u8 sts; + int ret; + + /* + * The I2C controller has an IN_USE bit for locking access to the + * controller. This enables the use of I2C controller by other none + * Linux processors. + * + * If the I2C controller is free, then the first read returns + * IN_USE == 0. After that the I2C controller is locked and further + * reads of IN_USE return 1. + * + * The I2C controller is unlocked by writing 1 into IN_USE. + * + * The IN_USE bit acts as a hardware semaphore for the I2C controller. + * Poll for semaphore, but sleep while polling to free the CPU. + */ + ret = readb_poll_timeout(ki2c->base + KI2C_STATUS_REG, + sts, (sts & KI2C_STATUS_IN_USE) == 0, + KI2C_INUSE_SLEEP_US, KI2C_INUSE_TIMEOUT_US); + if (ret) + dev_err(&ki2c->auxdev->auxdev.dev, "%s err!\n", __func__); + + return ret; +} + +static void ki2c_inuse_unlock(struct ki2c *ki2c) +{ + /* unlock the controller by writing 1 into IN_USE */ + iowrite8(KI2C_STATUS_IN_USE, ki2c->base + KI2C_STATUS_REG); +} + +static int ki2c_wait_for_bit(void __iomem *addr, u8 mask, unsigned long timeout) +{ + u8 val; + + return readb_poll_timeout(addr, val, (val & mask), KI2C_POLL_DELAY_US, + jiffies_to_usecs(timeout)); +} + +static int ki2c_wait_for_mcf(struct ki2c *ki2c) +{ + return ki2c_wait_for_bit(ki2c->base + KI2C_STATUS_REG, KI2C_STATUS_MCF, + ki2c->adapter.timeout); +} + +static int ki2c_wait_for_data(struct ki2c *ki2c) +{ + int ret; + + ret = ki2c_wait_for_mcf(ki2c); + if (ret < 0) + return ret; + + return ki2c_wait_for_bit(ki2c->base + KI2C_STATUS_REG, + KI2C_STATUS_ACK_CYC, + ki2c->adapter.timeout); +} + +static int ki2c_wait_for_data_ack(struct ki2c *ki2c) +{ + unsigned int reg; + int ret; + + ret = ki2c_wait_for_data(ki2c); + if (ret < 0) + return ret; + + /* RXAK == 0 means ACK reveived */ + reg = ioread8(ki2c->base + KI2C_STATUS_REG); + if (reg & KI2C_STATUS_RXAK) + return -EIO; + + return 0; +} + +static int ki2c_has_capability(struct ki2c *ki2c, unsigned int cap) +{ + unsigned int reg = ioread8(ki2c->base + KI2C_CAPABILITY_REG); + + return (reg & cap) != 0; +} + +static int ki2c_get_scl(struct ki2c *ki2c) +{ + unsigned int reg = ioread8(ki2c->base + KI2C_STATUS_DC_REG); + + /* capability KI2C_CAPABILITY_DC required */ + return (reg & KI2C_STATUS_DC_SCL) != 0; +} + +static int ki2c_get_sda(struct ki2c *ki2c) +{ + unsigned int reg = ioread8(ki2c->base + KI2C_STATUS_DC_REG); + + /* capability KI2C_CAPABILITY_DC required */ + return (reg & KI2C_STATUS_DC_SDA) != 0; +} + +static void ki2c_set_scl(struct ki2c *ki2c, int val) +{ + u8 control_dc; + + /* capability KI2C_CAPABILITY_DC and KI2C_CONTROL_MEN = 0 reqired */ + control_dc = ioread8(ki2c->base + KI2C_CONTROL_DC_REG); + if (val) + control_dc |= KI2C_CONTROL_DC_SCL; + else + control_dc &= ~KI2C_CONTROL_DC_SCL; + iowrite8(control_dc, ki2c->base + KI2C_CONTROL_DC_REG); +} + +/* + * Resetting bus bitwise is done by checking SDA and applying clock cycles as + * long as SDA is low. 9 clock cycles are applied at most. + * + * Clock cycles are generated and udelay() determines the duration of clock + * cycles. Generated clock rate is 100 KHz and so duration of both clock levels + * is: delay in ns = (10^6 / 100) / 2 + */ +#define KI2C_RECOVERY_CLK_CNT (9 * 2) +#define KI2C_RECOVERY_UDELAY 5 +static int ki2c_reset_bus_bitwise(struct ki2c *ki2c) +{ + int val = 1; + int ret = 0; + int i; + + /* disable I2C controller (MEN = 0) to get direct access to SCL/SDA */ + iowrite8(0, ki2c->base + KI2C_CONTROL_REG); + + /* generate clock cycles */ + ki2c_set_scl(ki2c, val); + udelay(KI2C_RECOVERY_UDELAY); + for (i = 0; i < KI2C_RECOVERY_CLK_CNT; i++) { + if (val) { + /* SCL shouldn't be low here */ + if (!ki2c_get_scl(ki2c)) { + dev_err(&ki2c->auxdev->auxdev.dev, + "SCL is stuck low!\n"); + ret = -EBUSY; + break; + } + + /* break if SDA is high */ + if (ki2c_get_sda(ki2c)) + break; + } + + val = !val; + ki2c_set_scl(ki2c, val); + udelay(KI2C_RECOVERY_UDELAY); + } + + if (!ki2c_get_sda(ki2c)) { + dev_err(&ki2c->auxdev->auxdev.dev, "SDA is still low!\n"); + ret = -EBUSY; + } + + /* reenable controller */ + iowrite8(KI2C_CONTROL_MEN, ki2c->base + KI2C_CONTROL_REG); + + return ret; +} + +/* + * Resetting bus bytewise is done by writing start bit, 9 data bits and stop + * bit. + * + * This is not 100% safe. If target is an EEPROM and a write access was + * interrupted during the ACK cycle, this approach might not be able to recover + * the bus. The reason is, that after the 9 clock cycles the EEPROM will be in + * ACK cycle again and will hold SDA low like it did before the start of the + * routine. Furthermore the EEPROM might get written one additional byte with + * 0xff into it. Thus, use bitwise approach whenever possible, especially when + * EEPROMs are on the bus. + */ +static int ki2c_reset_bus_bytewise(struct ki2c *ki2c) +{ + int ret; + + /* hold data line high for 9 clock cycles */ + iowrite8(0xFF, ki2c->base + KI2C_DATA_REG); + + /* create start condition */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MTX | KI2C_CONTROL_MSTA | KI2C_CONTROL_TXAK, + ki2c->base + KI2C_CONTROL_REG); + ret = ki2c_wait_for_mcf(ki2c); + if (ret < 0) { + dev_err(&ki2c->auxdev->auxdev.dev, "Start condition failed\n"); + + return ret; + } + + /* create stop condition */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MTX | KI2C_CONTROL_TXAK, + ki2c->base + KI2C_CONTROL_REG); + ret = ki2c_wait_for_mcf(ki2c); + if (ret < 0) + dev_err(&ki2c->auxdev->auxdev.dev, "Stop condition failed\n"); + + return ret; +} + +static int ki2c_reset_bus(struct ki2c *ki2c) +{ + int ret; + + ret = ki2c_inuse_lock(ki2c); + if (ret < 0) + return ret; + + /* + * If the I2C controller is capable of direct control of SCL/SDA, then a + * bitwise reset is used. Otherwise fall back to bytewise reset. + */ + if (ki2c_has_capability(ki2c, KI2C_CAPABILITY_DC)) + ret = ki2c_reset_bus_bitwise(ki2c); + else + ret = ki2c_reset_bus_bytewise(ki2c); + + ki2c_inuse_unlock(ki2c); + + return ret; +} + +static void ki2c_write_target_addr(struct ki2c *ki2c, struct i2c_msg *m) +{ + u8 addr; + + addr = m->addr << 1; + /* Bit 0 signals RD/WR */ + if (m->flags & I2C_M_RD) + addr |= 0x01; + + iowrite8(addr, ki2c->base + KI2C_DATA_REG); +} + +static int ki2c_start_addr(struct ki2c *ki2c, struct i2c_msg *m) +{ + int ret; + + /* + * Store target address byte in the controller. This has to be done + * before sending START condition. + */ + ki2c_write_target_addr(ki2c, m); + + /* enable controller for TX */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MTX, + ki2c->base + KI2C_CONTROL_REG); + + /* send START condition and target address byte */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MTX | KI2C_CONTROL_MSTA, + ki2c->base + KI2C_CONTROL_REG); + + ret = ki2c_wait_for_data_ack(ki2c); + if (ret < 0) + /* + * For EEPROMs this is normal behavior during internal write + * operation. + */ + dev_dbg(&ki2c->auxdev->auxdev.dev, + "%s wait for ACK err at 0x%02x!\n", __func__, m->addr); + + return ret; +} + +static int ki2c_repstart_addr(struct ki2c *ki2c, struct i2c_msg *m) +{ + int ret; + + /* repeated start and write is not supported */ + if ((m->flags & I2C_M_RD) == 0) { + dev_err(&ki2c->auxdev->auxdev.dev, + "Repeated start not supported for writes\n"); + return -EINVAL; + } + + /* send repeated start */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MSTA | KI2C_CONTROL_RSTA, + ki2c->base + KI2C_CONTROL_REG); + + ret = ki2c_wait_for_mcf(ki2c); + if (ret < 0) { + dev_err(&ki2c->auxdev->auxdev.dev, + "%s wait for MCF err at 0x%02x!\n", __func__, m->addr); + return ret; + } + + /* write target-address byte */ + ki2c_write_target_addr(ki2c, m); + + ret = ki2c_wait_for_data_ack(ki2c); + if (ret < 0) + dev_err(&ki2c->auxdev->auxdev.dev, + "%s wait for ACK err at 0x%02x!\n", __func__, m->addr); + + return ret; +} + +static void ki2c_stop(struct ki2c *ki2c) +{ + iowrite8(KI2C_CONTROL_MEN, ki2c->base + KI2C_CONTROL_REG); + ki2c_wait_for_mcf(ki2c); +} + +static int ki2c_write(struct ki2c *ki2c, const u8 *data, int len) +{ + int ret; + int i; + + for (i = 0; i < len; i++) { + /* write data byte */ + iowrite8(data[i], ki2c->base + KI2C_DATA_REG); + + ret = ki2c_wait_for_data_ack(ki2c); + if (ret < 0) + return ret; + } + + return 0; +} + +static int ki2c_read(struct ki2c *ki2c, u8 *data, int len) +{ + u8 control; + int ret; + int i; + + if (len == 0) + return 0; /* nothing to do */ + + control = KI2C_CONTROL_MEN | KI2C_CONTROL_MSTA; + + /* if just one byte => send tx-nack after transfer */ + if (len == 1) + control |= KI2C_CONTROL_TXAK; + + iowrite8(control, ki2c->base + KI2C_CONTROL_REG); + + /* dummy read to start transfer on bus */ + ioread8(ki2c->base + KI2C_DATA_REG); + + for (i = 0; i < len; i++) { + ret = ki2c_wait_for_data(ki2c); + if (ret < 0) + return ret; + + if (i == len - 2) + /* send tx-nack after transfer of last byte */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MSTA | KI2C_CONTROL_TXAK, + ki2c->base + KI2C_CONTROL_REG); + else if (i == len - 1) + /* + * switch to TX on last byte, so that reading DATA + * register does not trigger another read transfer + */ + iowrite8(KI2C_CONTROL_MEN | KI2C_CONTROL_MSTA | KI2C_CONTROL_MTX, + ki2c->base + KI2C_CONTROL_REG); + + /* read byte and start next transfer (if not last byte) */ + data[i] = ioread8(ki2c->base + KI2C_DATA_REG); + } + + return len; +} + +static int ki2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct ki2c *ki2c = i2c_get_adapdata(adap); + int ret; + int i; + + ret = ki2c_inuse_lock(ki2c); + if (ret < 0) + return ret; + + for (i = 0; i < num; i++) { + struct i2c_msg *m = &msgs[i]; + + if (i == 0) + ret = ki2c_start_addr(ki2c, m); + else + ret = ki2c_repstart_addr(ki2c, m); + if (ret < 0) + break; + + if (m->flags & I2C_M_RD) + ret = ki2c_read(ki2c, m->buf, m->len); + else + ret = ki2c_write(ki2c, m->buf, m->len); + if (ret < 0) + break; + } + + ki2c_stop(ki2c); + + ki2c_inuse_unlock(ki2c); + + return ret < 0 ? ret : num; +} + +static void ki2c_unregister_devices(struct ki2c *ki2c) +{ + int i; + + for (i = 0; i < ki2c->client_size; i++) { + struct i2c_client *client = ki2c->client[i]; + + if (client) + i2c_unregister_device(client); + } +} + +static int ki2c_register_devices(struct ki2c *ki2c) +{ + struct i2c_board_info *info = ki2c->auxdev->info; + int i; + + /* register all known I2C devices */ + for (i = 0; i < ki2c->client_size; i++) { + struct i2c_client *client; + unsigned short const addr_list[2] = { info[i].addr, + I2C_CLIENT_END }; + + client = i2c_new_scanned_device(&ki2c->adapter, &info[i], + addr_list, NULL); + if (!IS_ERR(client)) { + ki2c->client[i] = client; + } else if (PTR_ERR(client) != -ENODEV) { + ki2c->client_size = i; + ki2c_unregister_devices(ki2c); + + return PTR_ERR(client); + } + } + + return 0; +} + +static u32 ki2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm ki2c_algo = { + .master_xfer = ki2c_xfer, + .functionality = ki2c_func, +}; + +static int ki2c_probe(struct auxiliary_device *auxdev, + const struct auxiliary_device_id *id) +{ + struct device *dev = &auxdev->dev; + struct i2c_adapter *adap; + struct ki2c *ki2c; + int ret; + + ki2c = devm_kzalloc(dev, sizeof(*ki2c), GFP_KERNEL); + if (!ki2c) + return -ENOMEM; + ki2c->auxdev = container_of(auxdev, struct keba_i2c_auxdev, auxdev); + ki2c->client = devm_kcalloc(dev, ki2c->auxdev->info_size, + sizeof(*ki2c->client), GFP_KERNEL); + if (!ki2c->client) + return -ENOMEM; + ki2c->client_size = ki2c->auxdev->info_size; + auxiliary_set_drvdata(auxdev, ki2c); + + ki2c->base = devm_ioremap_resource(dev, &ki2c->auxdev->io); + if (IS_ERR(ki2c->base)) + return PTR_ERR(ki2c->base); + + adap = &ki2c->adapter; + strscpy(adap->name, "KEBA I2C adapter", sizeof(adap->name)); + adap->owner = THIS_MODULE; + adap->class = I2C_CLASS_HWMON; + adap->algo = &ki2c_algo; + adap->dev.parent = dev; + + i2c_set_adapdata(adap, ki2c); + + /* enable controller */ + iowrite8(KI2C_CONTROL_MEN, ki2c->base + KI2C_CONTROL_REG); + + /* reset bus before probing I2C devices */ + ret = ki2c_reset_bus(ki2c); + if (ret) + goto out; + + ret = devm_i2c_add_adapter(dev, adap); + if (ret) { + dev_err(dev, "Failed to add adapter (%d)!\n", ret); + goto out; + } + + ret = ki2c_register_devices(ki2c); + if (ret) { + dev_err(dev, "Failed to register devices (%d)!\n", ret); + goto out; + } + + return 0; + +out: + iowrite8(KI2C_CONTROL_DISABLE, ki2c->base + KI2C_CONTROL_REG); + return ret; +} + +static void ki2c_remove(struct auxiliary_device *auxdev) +{ + struct ki2c *ki2c = auxiliary_get_drvdata(auxdev); + + ki2c_unregister_devices(ki2c); + + /* disable controller */ + iowrite8(KI2C_CONTROL_DISABLE, ki2c->base + KI2C_CONTROL_REG); + + auxiliary_set_drvdata(auxdev, NULL); +} + +static const struct auxiliary_device_id ki2c_devtype_aux[] = { + { .name = "keba.i2c" }, + { } +}; +MODULE_DEVICE_TABLE(auxiliary, ki2c_devtype_aux); + +static struct auxiliary_driver ki2c_driver_aux = { + .name = KI2C, + .id_table = ki2c_devtype_aux, + .probe = ki2c_probe, + .remove = ki2c_remove, +}; +module_auxiliary_driver(ki2c_driver_aux); + +MODULE_AUTHOR("Gerhard Engleder <eg@keba.com>"); +MODULE_DESCRIPTION("KEBA I2C bus controller driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ljca.c b/drivers/i2c/busses/i2c-ljca.c index 0b70621cf9d3..1dc516ef0fdd 100644 --- a/drivers/i2c/busses/i2c-ljca.c +++ b/drivers/i2c/busses/i2c-ljca.c @@ -107,7 +107,7 @@ static int ljca_i2c_start(struct ljca_i2c_dev *ljca_i2c, u8 target_addr, return 0; } -static void ljca_i2c_stop(struct ljca_i2c_dev *ljca_i2c, u8 target_addr) +static void ljca_i2c_stop(struct ljca_i2c_dev *ljca_i2c) { struct ljca_i2c_rw_packet *w_packet = (struct ljca_i2c_rw_packet *)ljca_i2c->obuf; @@ -178,7 +178,7 @@ static int ljca_i2c_read(struct ljca_i2c_dev *ljca_i2c, u8 target_addr, u8 *data if (!ret) ret = ljca_i2c_pure_read(ljca_i2c, data, len); - ljca_i2c_stop(ljca_i2c, target_addr); + ljca_i2c_stop(ljca_i2c); return ret; } @@ -222,7 +222,7 @@ static int ljca_i2c_write(struct ljca_i2c_dev *ljca_i2c, u8 target_addr, if (!ret) ret = ljca_i2c_pure_write(ljca_i2c, data, len); - ljca_i2c_stop(ljca_i2c, target_addr); + ljca_i2c_stop(ljca_i2c); return ret; } diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index 41d6c8ed163a..236d6b8ba867 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -88,7 +88,6 @@ struct mpc_i2c { int irq; u32 real_clk; u8 fdr, dfsrr; - struct clk *clk_per; u32 cntl_bits; enum mpc_i2c_action action; struct i2c_msg *msgs; @@ -779,7 +778,6 @@ static int fsl_i2c_probe(struct platform_device *op) struct clk *clk; int result; u32 clock; - int err; i2c = devm_kzalloc(&op->dev, sizeof(*i2c), GFP_KERNEL); if (!i2c) @@ -809,18 +807,12 @@ static int fsl_i2c_probe(struct platform_device *op) * enable clock for the I2C peripheral (non fatal), * keep a reference upon successful allocation */ - clk = devm_clk_get_optional(&op->dev, NULL); - if (IS_ERR(clk)) - return PTR_ERR(clk); - - err = clk_prepare_enable(clk); - if (err) { + clk = devm_clk_get_optional_enabled(&op->dev, NULL); + if (IS_ERR(clk)) { dev_err(&op->dev, "failed to enable clock\n"); - return err; + return PTR_ERR(clk); } - i2c->clk_per = clk; - if (of_property_read_bool(op->dev.of_node, "fsl,preserve-clocking")) { clock = MPC_I2C_CLOCK_PRESERVE; } else { @@ -876,14 +868,9 @@ static int fsl_i2c_probe(struct platform_device *op) result = i2c_add_numbered_adapter(&i2c->adap); if (result) - goto fail_add; + return result; return 0; - - fail_add: - clk_disable_unprepare(i2c->clk_per); - - return result; }; static void fsl_i2c_remove(struct platform_device *op) @@ -891,8 +878,6 @@ static void fsl_i2c_remove(struct platform_device *op) struct mpc_i2c *i2c = platform_get_drvdata(op); i2c_del_adapter(&i2c->adap); - - clk_disable_unprepare(i2c->clk_per); }; static int __maybe_unused mpc_i2c_suspend(struct device *dev) diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c index a8b5719c3372..e0ba653dec2d 100644 --- a/drivers/i2c/busses/i2c-mt65xx.c +++ b/drivers/i2c/busses/i2c-mt65xx.c @@ -1306,12 +1306,9 @@ err_exit: static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id) { struct mtk_i2c *i2c = dev_id; - u16 restart_flag = 0; + u16 restart_flag = i2c->auto_restart ? I2C_RS_TRANSFER : 0; u16 intr_stat; - if (i2c->auto_restart) - restart_flag = I2C_RS_TRANSFER; - intr_stat = mtk_i2c_readw(i2c, OFFSET_INTR_STAT); mtk_i2c_writew(i2c, intr_stat, OFFSET_INTR_STAT); diff --git a/drivers/i2c/busses/i2c-npcm7xx.c b/drivers/i2c/busses/i2c-npcm7xx.c index 2fe68615942e..bbcb4d6668ce 100644 --- a/drivers/i2c/busses/i2c-npcm7xx.c +++ b/drivers/i2c/busses/i2c-npcm7xx.c @@ -136,11 +136,13 @@ enum i2c_addr { * Since the addr regs are sprinkled all over the address space, * use this array to get the address or each register. */ -#define I2C_NUM_OWN_ADDR 2 +#define I2C_NUM_OWN_ADDR 10 #define I2C_NUM_OWN_ADDR_SUPPORTED 2 static const int npcm_i2caddr[I2C_NUM_OWN_ADDR] = { - NPCM_I2CADDR1, NPCM_I2CADDR2, + NPCM_I2CADDR1, NPCM_I2CADDR2, NPCM_I2CADDR3, NPCM_I2CADDR4, + NPCM_I2CADDR5, NPCM_I2CADDR6, NPCM_I2CADDR7, NPCM_I2CADDR8, + NPCM_I2CADDR9, NPCM_I2CADDR10, }; #endif diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 35a3f0a64986..1d9ad25c89ae 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1261,7 +1261,7 @@ static const struct of_device_id omap_i2c_of_match[] = { .compatible = "ti,omap2420-i2c", .data = &omap2420_pdata, }, - { }, + { } }; MODULE_DEVICE_TABLE(of, omap_i2c_of_match); #endif diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 4e32d57ae0bf..febbd9950d8f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -146,7 +146,7 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { .ident = "IBM", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, }, - { }, + { } }; /* diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index f448505d5468..1dafadda73af 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -721,7 +721,7 @@ static void i2c_pnx_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id i2c_pnx_of_match[] = { { .compatible = "nxp,pnx-i2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, i2c_pnx_of_match); #endif diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index 6b3c6a733368..af2094720a4d 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -135,7 +135,7 @@ err_dev_add: static const struct pci_device_id ce4100_i2c_devices[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)}, - { }, + { } }; static struct pci_driver ce4100_i2c_driver = { diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 031175113dd4..4d76e71cdd4b 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -218,7 +218,7 @@ static const struct platform_device_id i2c_pxa_id_table[] = { { "ce4100-i2c", REGS_CE4100 }, { "pxa910-i2c", REGS_PXA910 }, { "armada-3700-i2c", REGS_A3700 }, - { }, + { } }; MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 4c9050a4d58e..212336f724a6 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -721,7 +721,7 @@ static const struct i2c_algorithm geni_i2c_algo = { static const struct acpi_device_id geni_i2c_acpi_match[] = { { "QCOM0220"}, { "QCOM0411" }, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match); #endif @@ -984,21 +984,24 @@ static int __maybe_unused geni_i2c_runtime_resume(struct device *dev) return ret; ret = clk_prepare_enable(gi2c->core_clk); - if (ret) { - geni_icc_disable(&gi2c->se); - return ret; - } + if (ret) + goto out_icc_disable; ret = geni_se_resources_on(&gi2c->se); - if (ret) { - clk_disable_unprepare(gi2c->core_clk); - geni_icc_disable(&gi2c->se); - return ret; - } + if (ret) + goto out_clk_disable; enable_irq(gi2c->irq); gi2c->suspended = 0; + return 0; + +out_clk_disable: + clk_disable_unprepare(gi2c->core_clk); +out_icc_disable: + geni_icc_disable(&gi2c->se); + + return ret; } static int __maybe_unused geni_i2c_suspend_noirq(struct device *dev) diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 4a2c745751a2..d480162a4d39 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -1648,7 +1648,7 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) static const struct acpi_device_id qup_i2c_acpi_match[] = { { "QCOM8010"}, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match); diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c index da4b07c0ed4c..9267df38c2d0 100644 --- a/drivers/i2c/busses/i2c-rcar.c +++ b/drivers/i2c/busses/i2c-rcar.c @@ -1164,11 +1164,6 @@ static int rcar_i2c_probe(struct platform_device *pdev) rcar_i2c_init(priv); rcar_i2c_reset_slave(priv); - if (priv->devtype < I2C_RCAR_GEN3) { - irqflags |= IRQF_NO_THREAD; - irqhandler = rcar_i2c_gen2_irq; - } - /* Stay always active when multi-master to keep arbitration working */ if (of_property_read_bool(dev->of_node, "multi-master")) priv->flags |= ID_P_PM_BLOCKED; @@ -1178,8 +1173,11 @@ static int rcar_i2c_probe(struct platform_device *pdev) if (of_property_read_bool(dev->of_node, "smbus")) priv->flags |= ID_P_HOST_NOTIFY; - /* R-Car Gen3+ needs a reset before every transfer */ - if (priv->devtype >= I2C_RCAR_GEN3) { + if (priv->devtype < I2C_RCAR_GEN3) { + irqflags |= IRQF_NO_THREAD; + irqhandler = rcar_i2c_gen2_irq; + } else { + /* R-Car Gen3+ needs a reset before every transfer */ priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(priv->rstc)) { ret = PTR_ERR(priv->rstc); diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c index d6f585cdb7e5..c7f3a4c02470 100644 --- a/drivers/i2c/busses/i2c-riic.c +++ b/drivers/i2c/busses/i2c-riic.c @@ -63,6 +63,8 @@ #define ICMR3_ACKWP 0x10 #define ICMR3_ACKBT 0x08 +#define ICFER_FMPE 0x80 + #define ICIER_TIE 0x80 #define ICIER_TEIE 0x40 #define ICIER_RIE 0x20 @@ -80,6 +82,7 @@ enum riic_reg_list { RIIC_ICCR2, RIIC_ICMR1, RIIC_ICMR3, + RIIC_ICFER, RIIC_ICSER, RIIC_ICIER, RIIC_ICSR2, @@ -91,7 +94,8 @@ enum riic_reg_list { }; struct riic_of_data { - u8 regs[RIIC_REG_END]; + const u8 *regs; + bool fast_mode_plus; }; struct riic_dev { @@ -105,6 +109,8 @@ struct riic_dev { struct completion msg_done; struct i2c_adapter adapter; struct clk *clk; + struct reset_control *rstc; + struct i2c_timings i2c_t; }; struct riic_irq_desc { @@ -131,11 +137,14 @@ static inline void riic_clear_set_bit(struct riic_dev *riic, u8 clear, u8 set, u static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) { struct riic_dev *riic = i2c_get_adapdata(adap); + struct device *dev = adap->dev.parent; unsigned long time_left; - int i; + int i, ret; u8 start_bit; - pm_runtime_get_sync(adap->dev.parent); + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; if (riic_readb(riic, RIIC_ICCR2) & ICCR2_BBSY) { riic->err = -EBUSY; @@ -168,7 +177,8 @@ static int riic_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) } out: - pm_runtime_put(adap->dev.parent); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); return riic->err ?: num; } @@ -298,21 +308,21 @@ static const struct i2c_algorithm riic_algo = { .functionality = riic_func, }; -static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) +static int riic_init_hw(struct riic_dev *riic) { - int ret = 0; + int ret; unsigned long rate; int total_ticks, cks, brl, brh; + struct i2c_timings *t = &riic->i2c_t; + struct device *dev = riic->adapter.dev.parent; + bool fast_mode_plus = riic->info->fast_mode_plus; + u32 max_freq = fast_mode_plus ? I2C_MAX_FAST_MODE_PLUS_FREQ + : I2C_MAX_FAST_MODE_FREQ; - pm_runtime_get_sync(riic->adapter.dev.parent); - - if (t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) { - dev_err(&riic->adapter.dev, - "unsupported bus speed (%dHz). %d max\n", - t->bus_freq_hz, I2C_MAX_FAST_MODE_FREQ); - ret = -EINVAL; - goto out; - } + if (t->bus_freq_hz > max_freq) + return dev_err_probe(&riic->adapter.dev, -EINVAL, + "unsupported bus speed %uHz (%u max)\n", + t->bus_freq_hz, max_freq); rate = clk_get_rate(riic->clk); @@ -349,8 +359,7 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) if (brl > (0x1F + 3)) { dev_err(&riic->adapter.dev, "invalid speed (%lu). Too slow.\n", (unsigned long)t->bus_freq_hz); - ret = -EINVAL; - goto out; + return -EINVAL; } brh = total_ticks - brl; @@ -382,6 +391,10 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) t->scl_fall_ns / (1000000000 / rate), t->scl_rise_ns / (1000000000 / rate), cks, brl, brh); + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; + /* Changing the order of accessing IICRST and ICE may break things! */ riic_writeb(riic, ICCR1_IICRST | ICCR1_SOWP, RIIC_ICCR1); riic_clear_set_bit(riic, 0, ICCR1_ICE, RIIC_ICCR1); @@ -393,11 +406,14 @@ static int riic_init_hw(struct riic_dev *riic, struct i2c_timings *t) riic_writeb(riic, 0, RIIC_ICSER); riic_writeb(riic, ICMR3_ACKWP | ICMR3_RDRFS, RIIC_ICMR3); + if (fast_mode_plus && t->bus_freq_hz > I2C_MAX_FAST_MODE_FREQ) + riic_clear_set_bit(riic, 0, ICFER_FMPE, RIIC_ICFER); + riic_clear_set_bit(riic, ICCR1_IICRST, 0, RIIC_ICCR1); -out: - pm_runtime_put(riic->adapter.dev.parent); - return ret; + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + return 0; } static struct riic_irq_desc riic_irqs[] = { @@ -415,13 +431,12 @@ static void riic_reset_control_assert(void *data) static int riic_i2c_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct riic_dev *riic; struct i2c_adapter *adap; - struct i2c_timings i2c_t; - struct reset_control *rstc; int i, ret; - riic = devm_kzalloc(&pdev->dev, sizeof(*riic), GFP_KERNEL); + riic = devm_kzalloc(dev, sizeof(*riic), GFP_KERNEL); if (!riic) return -ENOMEM; @@ -429,22 +444,22 @@ static int riic_i2c_probe(struct platform_device *pdev) if (IS_ERR(riic->base)) return PTR_ERR(riic->base); - riic->clk = devm_clk_get(&pdev->dev, NULL); + riic->clk = devm_clk_get(dev, NULL); if (IS_ERR(riic->clk)) { - dev_err(&pdev->dev, "missing controller clock"); + dev_err(dev, "missing controller clock"); return PTR_ERR(riic->clk); } - rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL); - if (IS_ERR(rstc)) - return dev_err_probe(&pdev->dev, PTR_ERR(rstc), + riic->rstc = devm_reset_control_get_optional_exclusive(dev, NULL); + if (IS_ERR(riic->rstc)) + return dev_err_probe(dev, PTR_ERR(riic->rstc), "Error: missing reset ctrl\n"); - ret = reset_control_deassert(rstc); + ret = reset_control_deassert(riic->rstc); if (ret) return ret; - ret = devm_add_action_or_reset(&pdev->dev, riic_reset_control_assert, rstc); + ret = devm_add_action_or_reset(dev, riic_reset_control_assert, riic->rstc); if (ret) return ret; @@ -453,31 +468,34 @@ static int riic_i2c_probe(struct platform_device *pdev) if (ret < 0) return ret; - ret = devm_request_irq(&pdev->dev, ret, riic_irqs[i].isr, + ret = devm_request_irq(dev, ret, riic_irqs[i].isr, 0, riic_irqs[i].name, riic); if (ret) { - dev_err(&pdev->dev, "failed to request irq %s\n", riic_irqs[i].name); + dev_err(dev, "failed to request irq %s\n", riic_irqs[i].name); return ret; } } - riic->info = of_device_get_match_data(&pdev->dev); + riic->info = of_device_get_match_data(dev); adap = &riic->adapter; i2c_set_adapdata(adap, riic); strscpy(adap->name, "Renesas RIIC adapter", sizeof(adap->name)); adap->owner = THIS_MODULE; adap->algo = &riic_algo; - adap->dev.parent = &pdev->dev; - adap->dev.of_node = pdev->dev.of_node; + adap->dev.parent = dev; + adap->dev.of_node = dev->of_node; init_completion(&riic->msg_done); - i2c_parse_fw_timings(&pdev->dev, &i2c_t, true); + i2c_parse_fw_timings(dev, &riic->i2c_t, true); - pm_runtime_enable(&pdev->dev); + /* Default 0 to save power. Can be overridden via sysfs for lower latency. */ + pm_runtime_set_autosuspend_delay(dev, 0); + pm_runtime_use_autosuspend(dev); + pm_runtime_enable(dev); - ret = riic_init_hw(riic, &i2c_t); + ret = riic_init_hw(riic); if (ret) goto out; @@ -487,60 +505,127 @@ static int riic_i2c_probe(struct platform_device *pdev) platform_set_drvdata(pdev, riic); - dev_info(&pdev->dev, "registered with %dHz bus speed\n", - i2c_t.bus_freq_hz); + dev_info(dev, "registered with %dHz bus speed\n", riic->i2c_t.bus_freq_hz); return 0; out: - pm_runtime_disable(&pdev->dev); + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); return ret; } static void riic_i2c_remove(struct platform_device *pdev) { struct riic_dev *riic = platform_get_drvdata(pdev); + struct device *dev = &pdev->dev; + int ret; - pm_runtime_get_sync(&pdev->dev); - riic_writeb(riic, 0, RIIC_ICIER); - pm_runtime_put(&pdev->dev); + ret = pm_runtime_resume_and_get(dev); + if (!ret) { + riic_writeb(riic, 0, RIIC_ICIER); + pm_runtime_put(dev); + } i2c_del_adapter(&riic->adapter); - pm_runtime_disable(&pdev->dev); + pm_runtime_disable(dev); + pm_runtime_dont_use_autosuspend(dev); } +static const u8 riic_rz_a_regs[RIIC_REG_END] = { + [RIIC_ICCR1] = 0x00, + [RIIC_ICCR2] = 0x04, + [RIIC_ICMR1] = 0x08, + [RIIC_ICMR3] = 0x10, + [RIIC_ICFER] = 0x14, + [RIIC_ICSER] = 0x18, + [RIIC_ICIER] = 0x1c, + [RIIC_ICSR2] = 0x24, + [RIIC_ICBRL] = 0x34, + [RIIC_ICBRH] = 0x38, + [RIIC_ICDRT] = 0x3c, + [RIIC_ICDRR] = 0x40, +}; + static const struct riic_of_data riic_rz_a_info = { - .regs = { - [RIIC_ICCR1] = 0x00, - [RIIC_ICCR2] = 0x04, - [RIIC_ICMR1] = 0x08, - [RIIC_ICMR3] = 0x10, - [RIIC_ICSER] = 0x18, - [RIIC_ICIER] = 0x1c, - [RIIC_ICSR2] = 0x24, - [RIIC_ICBRL] = 0x34, - [RIIC_ICBRH] = 0x38, - [RIIC_ICDRT] = 0x3c, - [RIIC_ICDRR] = 0x40, - }, + .regs = riic_rz_a_regs, + .fast_mode_plus = true, +}; + +static const struct riic_of_data riic_rz_a1h_info = { + .regs = riic_rz_a_regs, +}; + +static const u8 riic_rz_v2h_regs[RIIC_REG_END] = { + [RIIC_ICCR1] = 0x00, + [RIIC_ICCR2] = 0x01, + [RIIC_ICMR1] = 0x02, + [RIIC_ICMR3] = 0x04, + [RIIC_ICFER] = 0x05, + [RIIC_ICSER] = 0x06, + [RIIC_ICIER] = 0x07, + [RIIC_ICSR2] = 0x09, + [RIIC_ICBRL] = 0x10, + [RIIC_ICBRH] = 0x11, + [RIIC_ICDRT] = 0x12, + [RIIC_ICDRR] = 0x13, }; static const struct riic_of_data riic_rz_v2h_info = { - .regs = { - [RIIC_ICCR1] = 0x00, - [RIIC_ICCR2] = 0x01, - [RIIC_ICMR1] = 0x02, - [RIIC_ICMR3] = 0x04, - [RIIC_ICSER] = 0x06, - [RIIC_ICIER] = 0x07, - [RIIC_ICSR2] = 0x09, - [RIIC_ICBRL] = 0x10, - [RIIC_ICBRH] = 0x11, - [RIIC_ICDRT] = 0x12, - [RIIC_ICDRR] = 0x13, - }, + .regs = riic_rz_v2h_regs, + .fast_mode_plus = true, +}; + +static int riic_i2c_suspend(struct device *dev) +{ + struct riic_dev *riic = dev_get_drvdata(dev); + int ret; + + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; + + i2c_mark_adapter_suspended(&riic->adapter); + + /* Disable output on SDA, SCL pins. */ + riic_clear_set_bit(riic, ICCR1_ICE, 0, RIIC_ICCR1); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_sync(dev); + + return reset_control_assert(riic->rstc); +} + +static int riic_i2c_resume(struct device *dev) +{ + struct riic_dev *riic = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(riic->rstc); + if (ret) + return ret; + + ret = riic_init_hw(riic); + if (ret) { + /* + * In case this happens there is no way to recover from this + * state. The driver will remain loaded. We want to avoid + * keeping the reset line de-asserted for no reason. + */ + reset_control_assert(riic->rstc); + return ret; + } + + i2c_mark_adapter_resumed(&riic->adapter); + + return 0; +} + +static const struct dev_pm_ops riic_i2c_pm_ops = { + SYSTEM_SLEEP_PM_OPS(riic_i2c_suspend, riic_i2c_resume) }; static const struct of_device_id riic_i2c_dt_ids[] = { { .compatible = "renesas,riic-rz", .data = &riic_rz_a_info }, + { .compatible = "renesas,riic-r7s72100", .data = &riic_rz_a1h_info, }, { .compatible = "renesas,riic-r9a09g057", .data = &riic_rz_v2h_info }, { /* Sentinel */ }, }; @@ -551,6 +636,7 @@ static struct platform_driver riic_i2c_driver = { .driver = { .name = "i2c-riic", .of_match_table = riic_i2c_dt_ids, + .pm = pm_ptr(&riic_i2c_pm_ops), }, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 01419c738cfc..7698d9d59744 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -130,7 +130,7 @@ static const struct platform_device_id s3c24xx_driver_ids[] = { }, { .name = "s3c2440-hdmiphy-i2c", .driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO, - }, { }, + }, { } }; MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); diff --git a/drivers/i2c/busses/i2c-virtio.c b/drivers/i2c/busses/i2c-virtio.c index 52ba1e0845ca..2a351f961b89 100644 --- a/drivers/i2c/busses/i2c-virtio.c +++ b/drivers/i2c/busses/i2c-virtio.c @@ -182,7 +182,7 @@ static u32 virtio_i2c_func(struct i2c_adapter *adap) return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; } -static struct i2c_algorithm virtio_algorithm = { +static const struct i2c_algorithm virtio_algorithm = { .xfer = virtio_i2c_xfer, .functionality = virtio_i2c_func, }; @@ -237,7 +237,7 @@ static void virtio_i2c_remove(struct virtio_device *vdev) virtio_i2c_del_vqs(vdev); } -static struct virtio_device_id id_table[] = { +static const struct virtio_device_id id_table[] = { { VIRTIO_ID_I2C_ADAPTER, VIRTIO_DEV_ANY_ID }, {} }; diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index b63f75e44296..7c810893bfa3 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -915,6 +915,27 @@ int i2c_dev_irq_from_resources(const struct resource *resources, return 0; } +/* + * Serialize device instantiation in case it can be instantiated explicitly + * and by auto-detection + */ +static int i2c_lock_addr(struct i2c_adapter *adap, unsigned short addr, + unsigned short flags) +{ + if (!(flags & I2C_CLIENT_TEN) && + test_and_set_bit(addr, adap->addrs_in_instantiation)) + return -EBUSY; + + return 0; +} + +static void i2c_unlock_addr(struct i2c_adapter *adap, unsigned short addr, + unsigned short flags) +{ + if (!(flags & I2C_CLIENT_TEN)) + clear_bit(addr, adap->addrs_in_instantiation); +} + /** * i2c_new_client_device - instantiate an i2c device * @adap: the adapter managing the device @@ -962,6 +983,10 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf goto out_err_silent; } + status = i2c_lock_addr(adap, client->addr, client->flags); + if (status) + goto out_err_silent; + /* Check for address business */ status = i2c_check_addr_busy(adap, i2c_encode_flags_to_addr(client)); if (status) @@ -993,6 +1018,8 @@ i2c_new_client_device(struct i2c_adapter *adap, struct i2c_board_info const *inf dev_dbg(&adap->dev, "client [%s] registered with bus id %s\n", client->name, dev_name(&client->dev)); + i2c_unlock_addr(adap, client->addr, client->flags); + return client; out_remove_swnode: @@ -1004,6 +1031,7 @@ out_err: dev_err(&adap->dev, "Failed to register i2c client %s at 0x%02x (%d)\n", client->name, client->addr, status); + i2c_unlock_addr(adap, client->addr, client->flags); out_err_silent: if (need_put) put_device(&client->dev); @@ -1068,7 +1096,7 @@ EXPORT_SYMBOL(i2c_find_device_by_fwnode); static const struct i2c_device_id dummy_id[] = { { "dummy", }, { "smbus_host_notify", }, - { }, + { } }; static int dummy_probe(struct i2c_client *client) @@ -1367,10 +1395,6 @@ struct i2c_adapter *i2c_verify_adapter(struct device *dev) } EXPORT_SYMBOL(i2c_verify_adapter); -#ifdef CONFIG_I2C_COMPAT -static struct class_compat *i2c_adapter_compat_class; -#endif - static void i2c_scan_static_board_info(struct i2c_adapter *adapter) { struct i2c_devinfo *devinfo; @@ -1524,7 +1548,18 @@ static int i2c_register_adapter(struct i2c_adapter *adap) dev_set_name(&adap->dev, "i2c-%d", adap->nr); adap->dev.bus = &i2c_bus_type; adap->dev.type = &i2c_adapter_type; - res = device_register(&adap->dev); + device_initialize(&adap->dev); + + /* + * This adapter can be used as a parent immediately after device_add(), + * setup runtime-pm (especially ignore-children) before hand. + */ + device_enable_async_suspend(&adap->dev); + pm_runtime_no_callbacks(&adap->dev); + pm_suspend_ignore_children(&adap->dev, true); + pm_runtime_enable(&adap->dev); + + res = device_add(&adap->dev); if (res) { pr_err("adapter '%s': can't register device (%d)\n", adap->name, res); goto out_list; @@ -1536,25 +1571,12 @@ static int i2c_register_adapter(struct i2c_adapter *adap) if (res) goto out_reg; - device_enable_async_suspend(&adap->dev); - pm_runtime_no_callbacks(&adap->dev); - pm_suspend_ignore_children(&adap->dev, true); - pm_runtime_enable(&adap->dev); - res = i2c_init_recovery(adap); if (res == -EPROBE_DEFER) goto out_reg; dev_dbg(&adap->dev, "adapter [%s] registered\n", adap->name); -#ifdef CONFIG_I2C_COMPAT - res = class_compat_create_link(i2c_adapter_compat_class, &adap->dev, - adap->dev.parent); - if (res) - dev_warn(&adap->dev, - "Failed to create compatibility class link\n"); -#endif - /* create pre-declared device nodes */ of_i2c_register_devices(adap); i2c_acpi_install_space_handler(adap); @@ -1761,11 +1783,6 @@ void i2c_del_adapter(struct i2c_adapter *adap) device_for_each_child(&adap->dev, NULL, __unregister_client); device_for_each_child(&adap->dev, NULL, __unregister_dummy); -#ifdef CONFIG_I2C_COMPAT - class_compat_remove_link(i2c_adapter_compat_class, &adap->dev, - adap->dev.parent); -#endif - /* device name is gone after device_unregister */ dev_dbg(&adap->dev, "adapter [%s] unregistered\n", adap->name); @@ -2074,13 +2091,6 @@ static int __init i2c_init(void) i2c_debugfs_root = debugfs_create_dir("i2c", NULL); -#ifdef CONFIG_I2C_COMPAT - i2c_adapter_compat_class = class_compat_register("i2c-adapter"); - if (!i2c_adapter_compat_class) { - retval = -ENOMEM; - goto bus_err; - } -#endif retval = i2c_add_driver(&dummy_driver); if (retval) goto class_err; @@ -2093,10 +2103,6 @@ static int __init i2c_init(void) return 0; class_err: -#ifdef CONFIG_I2C_COMPAT - class_compat_unregister(i2c_adapter_compat_class); -bus_err: -#endif is_registered = false; bus_unregister(&i2c_bus_type); return retval; @@ -2109,9 +2115,6 @@ static void __exit i2c_exit(void) if (IS_ENABLED(CONFIG_OF_DYNAMIC)) WARN_ON(of_reconfig_notifier_unregister(&i2c_of_notifier)); i2c_del_driver(&dummy_driver); -#ifdef CONFIG_I2C_COMPAT - class_compat_unregister(i2c_adapter_compat_class); -#endif debugfs_remove_recursive(i2c_debugfs_root); bus_unregister(&i2c_bus_type); tracepoint_synchronize_unregister(); diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c index e3765e12f93b..faefe1dfa8e5 100644 --- a/drivers/i2c/i2c-core-slave.c +++ b/drivers/i2c/i2c-core-slave.c @@ -109,15 +109,12 @@ EXPORT_SYMBOL_GPL(i2c_slave_event); bool i2c_detect_slave_mode(struct device *dev) { if (IS_BUILTIN(CONFIG_OF) && dev->of_node) { - struct device_node *child; u32 reg; - for_each_child_of_node(dev->of_node, child) { + for_each_child_of_node_scoped(dev->of_node, child) { of_property_read_u32(child, "reg", ®); - if (reg & I2C_OWN_SLAVE_ADDRESS) { - of_node_put(child); + if (reg & I2C_OWN_SLAVE_ADDRESS) return true; - } } } else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) { dev_dbg(dev, "ACPI slave is not supported yet\n"); diff --git a/drivers/i2c/i2c-slave-testunit.c b/drivers/i2c/i2c-slave-testunit.c index 4c550306f3ec..9fe3150378e8 100644 --- a/drivers/i2c/i2c-slave-testunit.c +++ b/drivers/i2c/i2c-slave-testunit.c @@ -6,7 +6,10 @@ * Copyright (C) 2020 by Renesas Electronics Corporation */ +#include <generated/utsrelease.h> #include <linux/bitops.h> +#include <linux/completion.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/init.h> #include <linux/module.h> @@ -14,12 +17,14 @@ #include <linux/slab.h> #include <linux/workqueue.h> /* FIXME: is system_long_wq the best choice? */ -#define TU_CUR_VERSION 0x01 +#define TU_VERSION_MAX_LENGTH 128 enum testunit_cmds { TU_CMD_READ_BYTES = 1, /* save 0 for ABORT, RESET or similar */ TU_CMD_SMBUS_HOST_NOTIFY, TU_CMD_SMBUS_BLOCK_PROC_CALL, + TU_CMD_GET_VERSION_WITH_REP_START, + TU_CMD_SMBUS_ALERT_REQUEST, TU_NUM_CMDS }; @@ -39,50 +44,38 @@ struct testunit_data { unsigned long flags; u8 regs[TU_NUM_REGS]; u8 reg_idx; + u8 read_idx; struct i2c_client *client; struct delayed_work worker; + struct gpio_desc *gpio; + struct completion alert_done; }; -static void i2c_slave_testunit_work(struct work_struct *work) -{ - struct testunit_data *tu = container_of(work, struct testunit_data, worker.work); - struct i2c_msg msg; - u8 msgbuf[256]; - int ret = 0; - - msg.addr = I2C_CLIENT_END; - msg.buf = msgbuf; +static char tu_version_info[] = "v" UTS_RELEASE "\n\0"; - switch (tu->regs[TU_REG_CMD]) { - case TU_CMD_READ_BYTES: - msg.addr = tu->regs[TU_REG_DATAL]; - msg.flags = I2C_M_RD; - msg.len = tu->regs[TU_REG_DATAH]; - break; +static int i2c_slave_testunit_smbalert_cb(struct i2c_client *client, + enum i2c_slave_event event, u8 *val) +{ + struct testunit_data *tu = i2c_get_clientdata(client); - case TU_CMD_SMBUS_HOST_NOTIFY: - msg.addr = 0x08; - msg.flags = 0; - msg.len = 3; - msgbuf[0] = tu->client->addr; - msgbuf[1] = tu->regs[TU_REG_DATAL]; - msgbuf[2] = tu->regs[TU_REG_DATAH]; + switch (event) { + case I2C_SLAVE_READ_PROCESSED: + gpiod_set_value(tu->gpio, 0); + fallthrough; + case I2C_SLAVE_READ_REQUESTED: + *val = tu->regs[TU_REG_DATAL]; break; - default: + case I2C_SLAVE_STOP: + complete(&tu->alert_done); break; - } - if (msg.addr != I2C_CLIENT_END) { - ret = i2c_transfer(tu->client->adapter, &msg, 1); - /* convert '0 msgs transferred' to errno */ - ret = (ret == 0) ? -EIO : ret; + case I2C_SLAVE_WRITE_REQUESTED: + case I2C_SLAVE_WRITE_RECEIVED: + return -EOPNOTSUPP; } - if (ret < 0) - dev_err(&tu->client->dev, "CMD%02X failed (%d)\n", tu->regs[TU_REG_CMD], ret); - - clear_bit(TU_FLAG_IN_PROCESS, &tu->flags); + return 0; } static int i2c_slave_testunit_slave_cb(struct i2c_client *client, @@ -91,9 +84,20 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client, struct testunit_data *tu = i2c_get_clientdata(client); bool is_proc_call = tu->reg_idx == 3 && tu->regs[TU_REG_DATAL] == 1 && tu->regs[TU_REG_CMD] == TU_CMD_SMBUS_BLOCK_PROC_CALL; + bool is_get_version = tu->reg_idx == 3 && + tu->regs[TU_REG_CMD] == TU_CMD_GET_VERSION_WITH_REP_START; int ret = 0; switch (event) { + case I2C_SLAVE_WRITE_REQUESTED: + if (test_bit(TU_FLAG_IN_PROCESS, &tu->flags)) + return -EBUSY; + + memset(tu->regs, 0, TU_NUM_REGS); + tu->reg_idx = 0; + tu->read_idx = 0; + break; + case I2C_SLAVE_WRITE_RECEIVED: if (test_bit(TU_FLAG_IN_PROCESS, &tu->flags)) return -EBUSY; @@ -127,27 +131,93 @@ static int i2c_slave_testunit_slave_cb(struct i2c_client *client, tu->reg_idx = 0; break; - case I2C_SLAVE_WRITE_REQUESTED: - if (test_bit(TU_FLAG_IN_PROCESS, &tu->flags)) - return -EBUSY; - - memset(tu->regs, 0, TU_NUM_REGS); - tu->reg_idx = 0; - break; - case I2C_SLAVE_READ_PROCESSED: - if (is_proc_call && tu->regs[TU_REG_DATAH]) + /* Advance until we reach the NUL character */ + if (is_get_version && tu_version_info[tu->read_idx] != 0) + tu->read_idx++; + else if (is_proc_call && tu->regs[TU_REG_DATAH]) tu->regs[TU_REG_DATAH]--; + fallthrough; case I2C_SLAVE_READ_REQUESTED: - *val = is_proc_call ? tu->regs[TU_REG_DATAH] : TU_CUR_VERSION; + if (is_get_version) + *val = tu_version_info[tu->read_idx]; + else if (is_proc_call) + *val = tu->regs[TU_REG_DATAH]; + else + *val = test_bit(TU_FLAG_IN_PROCESS, &tu->flags) ? + tu->regs[TU_REG_CMD] : 0; break; } return ret; } +static void i2c_slave_testunit_work(struct work_struct *work) +{ + struct testunit_data *tu = container_of(work, struct testunit_data, worker.work); + unsigned long time_left; + struct i2c_msg msg; + u8 msgbuf[256]; + u16 orig_addr; + int ret = 0; + + msg.addr = I2C_CLIENT_END; + msg.buf = msgbuf; + + switch (tu->regs[TU_REG_CMD]) { + case TU_CMD_READ_BYTES: + msg.addr = tu->regs[TU_REG_DATAL]; + msg.flags = I2C_M_RD; + msg.len = tu->regs[TU_REG_DATAH]; + break; + + case TU_CMD_SMBUS_HOST_NOTIFY: + msg.addr = 0x08; + msg.flags = 0; + msg.len = 3; + msgbuf[0] = tu->client->addr; + msgbuf[1] = tu->regs[TU_REG_DATAL]; + msgbuf[2] = tu->regs[TU_REG_DATAH]; + break; + + case TU_CMD_SMBUS_ALERT_REQUEST: + i2c_slave_unregister(tu->client); + orig_addr = tu->client->addr; + tu->client->addr = 0x0c; + ret = i2c_slave_register(tu->client, i2c_slave_testunit_smbalert_cb); + if (ret) + goto out_smbalert; + + reinit_completion(&tu->alert_done); + gpiod_set_value(tu->gpio, 1); + time_left = wait_for_completion_timeout(&tu->alert_done, HZ); + if (!time_left) + ret = -ETIMEDOUT; + + i2c_slave_unregister(tu->client); +out_smbalert: + tu->client->addr = orig_addr; + i2c_slave_register(tu->client, i2c_slave_testunit_slave_cb); + break; + + default: + break; + } + + if (msg.addr != I2C_CLIENT_END) { + ret = i2c_transfer(tu->client->adapter, &msg, 1); + /* convert '0 msgs transferred' to errno */ + ret = (ret == 0) ? -EIO : ret; + } + + if (ret < 0) + dev_err(&tu->client->dev, "CMD%02X failed (%d)\n", tu->regs[TU_REG_CMD], ret); + + clear_bit(TU_FLAG_IN_PROCESS, &tu->flags); +} + static int i2c_slave_testunit_probe(struct i2c_client *client) { struct testunit_data *tu; @@ -158,8 +228,18 @@ static int i2c_slave_testunit_probe(struct i2c_client *client) tu->client = client; i2c_set_clientdata(client, tu); + init_completion(&tu->alert_done); INIT_DELAYED_WORK(&tu->worker, i2c_slave_testunit_work); + tu->gpio = devm_gpiod_get_index_optional(&client->dev, NULL, 0, GPIOD_OUT_LOW); + if (gpiod_cansleep(tu->gpio)) { + dev_err(&client->dev, "GPIO access which may sleep is not allowed\n"); + return -EDEADLK; + } + + if (sizeof(tu_version_info) > TU_VERSION_MAX_LENGTH) + tu_version_info[TU_VERSION_MAX_LENGTH - 1] = 0; + return i2c_slave_register(client, i2c_slave_testunit_slave_cb); }; diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index db1b9057612a..6d2f66810cdc 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -119,4 +119,20 @@ config I2C_MUX_MLXCPLD This driver can also be built as a module. If so, the module will be called i2c-mux-mlxcpld. +config I2C_MUX_MULE + tristate "Theobroma Systems Mule I2C device multiplexer" + depends on OF && SENSORS_AMC6821 + help + Mule is an MCU that emulates a set of I2C devices, among which + devices that are reachable through an I2C-mux. The devices on the mux + can be selected by writing the appropriate device number to an I2C + configuration register. + + If you say yes to this option, support will be included for a + Theobroma Systems Mule I2C multiplexer. This driver provides access to + I2C devices connected on this mux. + + This driver can also be built as a module. If so, the module + will be called i2c-mux-mule. + endmenu diff --git a/drivers/i2c/muxes/Makefile b/drivers/i2c/muxes/Makefile index 6d9d865e8518..4b24f49515a7 100644 --- a/drivers/i2c/muxes/Makefile +++ b/drivers/i2c/muxes/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_I2C_MUX_GPIO) += i2c-mux-gpio.o obj-$(CONFIG_I2C_MUX_GPMUX) += i2c-mux-gpmux.o obj-$(CONFIG_I2C_MUX_LTC4306) += i2c-mux-ltc4306.o obj-$(CONFIG_I2C_MUX_MLXCPLD) += i2c-mux-mlxcpld.o +obj-$(CONFIG_I2C_MUX_MULE) += i2c-mux-mule.o obj-$(CONFIG_I2C_MUX_PCA9541) += i2c-mux-pca9541.o obj-$(CONFIG_I2C_MUX_PCA954x) += i2c-mux-pca954x.o obj-$(CONFIG_I2C_MUX_PINCTRL) += i2c-mux-pinctrl.o diff --git a/drivers/i2c/muxes/i2c-mux-mule.c b/drivers/i2c/muxes/i2c-mux-mule.c new file mode 100644 index 000000000000..8e942470b35f --- /dev/null +++ b/drivers/i2c/muxes/i2c-mux-mule.c @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Theobroma Systems Mule I2C device multiplexer + * + * Copyright (C) 2024 Theobroma Systems Design und Consulting GmbH + */ + +#include <linux/i2c-mux.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/regmap.h> + +#define MULE_I2C_MUX_CONFIG_REG 0xff +#define MULE_I2C_MUX_DEFAULT_DEV 0x0 + +struct mule_i2c_reg_mux { + struct regmap *regmap; +}; + +static int mule_i2c_mux_select(struct i2c_mux_core *muxc, u32 dev) +{ + struct mule_i2c_reg_mux *mux = muxc->priv; + + return regmap_write(mux->regmap, MULE_I2C_MUX_CONFIG_REG, dev); +} + +static int mule_i2c_mux_deselect(struct i2c_mux_core *muxc, u32 dev) +{ + return mule_i2c_mux_select(muxc, MULE_I2C_MUX_DEFAULT_DEV); +} + +static void mule_i2c_mux_remove(void *data) +{ + struct i2c_mux_core *muxc = data; + + i2c_mux_del_adapters(muxc); + + mule_i2c_mux_deselect(muxc, MULE_I2C_MUX_DEFAULT_DEV); +} + +static int mule_i2c_mux_probe(struct platform_device *pdev) +{ + struct device *mux_dev = &pdev->dev; + struct mule_i2c_reg_mux *priv; + struct i2c_client *client; + struct i2c_mux_core *muxc; + struct device_node *dev; + unsigned int readback; + int ndev, ret; + bool old_fw; + + /* Count devices on the mux */ + ndev = of_get_child_count(mux_dev->of_node); + dev_dbg(mux_dev, "%d devices on the mux\n", ndev); + + client = to_i2c_client(mux_dev->parent); + + muxc = i2c_mux_alloc(client->adapter, mux_dev, ndev, sizeof(*priv), + I2C_MUX_LOCKED, mule_i2c_mux_select, mule_i2c_mux_deselect); + if (!muxc) + return -ENOMEM; + + priv = i2c_mux_priv(muxc); + + priv->regmap = dev_get_regmap(mux_dev->parent, NULL); + if (IS_ERR(priv->regmap)) + return dev_err_probe(mux_dev, PTR_ERR(priv->regmap), + "No parent i2c register map\n"); + + platform_set_drvdata(pdev, muxc); + + /* + * MULE_I2C_MUX_DEFAULT_DEV is guaranteed to exist on all old and new + * mule fw. Mule fw without mux support will accept write ops to the + * config register, but readback returns 0xff (register not updated). + */ + ret = mule_i2c_mux_select(muxc, MULE_I2C_MUX_DEFAULT_DEV); + if (ret) + return dev_err_probe(mux_dev, ret, + "Failed to write config register\n"); + + ret = regmap_read(priv->regmap, MULE_I2C_MUX_CONFIG_REG, &readback); + if (ret) + return dev_err_probe(mux_dev, ret, + "Failed to read config register\n"); + + old_fw = (readback != MULE_I2C_MUX_DEFAULT_DEV); + + ret = devm_add_action_or_reset(mux_dev, mule_i2c_mux_remove, muxc); + if (ret) + return dev_err_probe(mux_dev, ret, + "Failed to register mux remove\n"); + + /* Create device adapters */ + for_each_child_of_node(mux_dev->of_node, dev) { + u32 reg; + + ret = of_property_read_u32(dev, "reg", ®); + if (ret) + return dev_err_probe(mux_dev, ret, + "No reg property found for %s\n", + of_node_full_name(dev)); + + if (old_fw && reg != 0) { + dev_warn(mux_dev, + "Mux is not supported, please update Mule FW\n"); + continue; + } + + ret = mule_i2c_mux_select(muxc, reg); + if (ret) { + dev_warn(mux_dev, + "Device %d not supported, please update Mule FW\n", reg); + continue; + } + + ret = i2c_mux_add_adapter(muxc, 0, reg); + if (ret) + return ret; + } + + mule_i2c_mux_deselect(muxc, MULE_I2C_MUX_DEFAULT_DEV); + + return 0; +} + +static const struct of_device_id mule_i2c_mux_of_match[] = { + { .compatible = "tsd,mule-i2c-mux", }, + {}, +}; +MODULE_DEVICE_TABLE(of, mule_i2c_mux_of_match); + +static struct platform_driver mule_i2c_mux_driver = { + .driver = { + .name = "mule-i2c-mux", + .of_match_table = mule_i2c_mux_of_match, + }, + .probe = mule_i2c_mux_probe, +}; + +module_platform_driver(mule_i2c_mux_driver); + +MODULE_AUTHOR("Farouk Bouabid <farouk.bouabid@cherry.de>"); +MODULE_DESCRIPTION("I2C mux driver for Theobroma Systems Mule"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/wangxun/Kconfig b/drivers/net/ethernet/wangxun/Kconfig index 85cdbdd44fec..e46ccebcfd22 100644 --- a/drivers/net/ethernet/wangxun/Kconfig +++ b/drivers/net/ethernet/wangxun/Kconfig @@ -41,10 +41,9 @@ config TXGBE tristate "Wangxun(R) 10GbE PCI Express adapters support" depends on PCI depends on COMMON_CLK + depends on I2C_DESIGNWARE_PLATFORM select MARVELL_10G_PHY select REGMAP - select I2C - select I2C_DESIGNWARE_PLATFORM select PHYLINK select HWMON if TXGBE=y select SFP |