diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/misc/Kconfig | 13 | ||||
-rw-r--r-- | drivers/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/misc/pti.c | 978 | ||||
-rw-r--r-- | drivers/tty/Makefile | 2 | ||||
-rw-r--r-- | drivers/tty/n_tracerouter.c | 233 | ||||
-rw-r--r-- | drivers/tty/n_tracesink.c | 228 | ||||
-rw-r--r-- | drivers/tty/n_tracesink.h | 26 |
7 files changed, 0 insertions, 1481 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 8085213913cc..f532c59bb59b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -104,19 +104,6 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. -config INTEL_MID_PTI - tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard" - depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST) - help - The PTI (Parallel Trace Interface) driver directs - trace data routed from various parts in the system out - through an Intel Penwell PTI port and out of the mobile - device for analysis with a debugging tool (Lauterbach or Fido). - - You should select this driver if the target kernel is meant for - an Intel Atom (non-netbook) mobile device containing a MIPI - P1149.7 standard implementation. - config TIFM_CORE tristate "TI Flash Media interface support" depends on PCI diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 456aa8a4c896..99b6f15a3c70 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -8,7 +8,6 @@ obj-$(CONFIG_IBMVMC) += ibmvmc.o obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o -obj-$(CONFIG_INTEL_MID_PTI) += pti.o obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o obj-$(CONFIG_DUMMY_IRQ) += dummy-irq.o obj-$(CONFIG_ICS932S401) += ics932s401.o diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c deleted file mode 100644 index 7236ae527b19..000000000000 --- a/drivers/misc/pti.c +++ /dev/null @@ -1,978 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * pti.c - PTI driver for cJTAG data extration - * - * Copyright (C) Intel 2010 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * The PTI (Parallel Trace Interface) driver directs trace data routed from - * various parts in the system out through the Intel Penwell PTI port and - * out of the mobile device for analysis with a debugging tool - * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, - * compact JTAG, standard. - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/console.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/tty.h> -#include <linux/tty_driver.h> -#include <linux/pci.h> -#include <linux/mutex.h> -#include <linux/miscdevice.h> -#include <linux/intel-pti.h> -#include <linux/slab.h> -#include <linux/uaccess.h> - -#define DRIVERNAME "pti" -#define PCINAME "pciPTI" -#define TTYNAME "ttyPTI" -#define CHARNAME "pti" -#define PTITTY_MINOR_START 0 -#define PTITTY_MINOR_NUM 2 -#define MAX_APP_IDS 16 /* 128 channel ids / u8 bit size */ -#define MAX_OS_IDS 16 /* 128 channel ids / u8 bit size */ -#define MAX_MODEM_IDS 16 /* 128 channel ids / u8 bit size */ -#define MODEM_BASE_ID 71 /* modem master ID address */ -#define CONTROL_ID 72 /* control master ID address */ -#define CONSOLE_ID 73 /* console master ID address */ -#define OS_BASE_ID 74 /* base OS master ID address */ -#define APP_BASE_ID 80 /* base App master ID address */ -#define CONTROL_FRAME_LEN 32 /* PTI control frame maximum size */ -#define USER_COPY_SIZE 8192 /* 8Kb buffer for user space copy */ -#define APERTURE_14 0x3800000 /* offset to first OS write addr */ -#define APERTURE_LEN 0x400000 /* address length */ - -struct pti_tty { - struct pti_masterchannel *mc; -}; - -struct pti_dev { - struct tty_port port[PTITTY_MINOR_NUM]; - unsigned long pti_addr; - unsigned long aperture_base; - void __iomem *pti_ioaddr; - u8 ia_app[MAX_APP_IDS]; - u8 ia_os[MAX_OS_IDS]; - u8 ia_modem[MAX_MODEM_IDS]; -}; - -/* - * This protects access to ia_app, ia_os, and ia_modem, - * which keeps track of channels allocated in - * an aperture write id. - */ -static DEFINE_MUTEX(alloclock); - -static const struct pci_device_id pci_ids[] = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x82B)}, - {0} -}; - -static struct tty_driver *pti_tty_driver; -static struct pti_dev *drv_data; - -static unsigned int pti_console_channel; -static unsigned int pti_control_channel; - -/** - * pti_write_to_aperture()- The private write function to PTI HW. - * - * @mc: The 'aperture'. It's part of a write address that holds - * a master and channel ID. - * @buf: Data being written to the HW that will ultimately be seen - * in a debugging tool (Fido, Lauterbach). - * @len: Size of buffer. - * - * Since each aperture is specified by a unique - * master/channel ID, no two processes will be writing - * to the same aperture at the same time so no lock is required. The - * PTI-Output agent will send these out in the order that they arrived, and - * thus, it will intermix these messages. The debug tool can then later - * regroup the appropriate message segments together reconstituting each - * message. - */ -static void pti_write_to_aperture(struct pti_masterchannel *mc, - u8 *buf, - int len) -{ - int dwordcnt; - int final; - int i; - u32 ptiword; - u32 __iomem *aperture; - u8 *p = buf; - - /* - * calculate the aperture offset from the base using the master and - * channel id's. - */ - aperture = drv_data->pti_ioaddr + (mc->master << 15) - + (mc->channel << 8); - - dwordcnt = len >> 2; - final = len - (dwordcnt << 2); /* final = trailing bytes */ - if (final == 0 && dwordcnt != 0) { /* always need a final dword */ - final += 4; - dwordcnt--; - } - - for (i = 0; i < dwordcnt; i++) { - ptiword = be32_to_cpu(*(u32 *)p); - p += 4; - iowrite32(ptiword, aperture); - } - - aperture += PTI_LASTDWORD_DTS; /* adding DTS signals that is EOM */ - - ptiword = 0; - for (i = 0; i < final; i++) - ptiword |= *p++ << (24-(8*i)); - - iowrite32(ptiword, aperture); - return; -} - -/** - * pti_control_frame_built_and_sent()- control frame build and send function. - * - * @mc: The master / channel structure on which the function - * built a control frame. - * @thread_name: The thread name associated with the master / channel or - * 'NULL' if using the 'current' global variable. - * - * To be able to post process the PTI contents on host side, a control frame - * is added before sending any PTI content. So the host side knows on - * each PTI frame the name of the thread using a dedicated master / channel. - * The thread name is retrieved from 'current' global variable if 'thread_name' - * is 'NULL', else it is retrieved from 'thread_name' parameter. - * This function builds this frame and sends it to a master ID CONTROL_ID. - * The overhead is only 32 bytes since the driver only writes to HW - * in 32 byte chunks. - */ -static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc, - const char *thread_name) -{ - /* - * Since we access the comm member in current's task_struct, we only - * need to be as large as what 'comm' in that structure is. - */ - char comm[TASK_COMM_LEN]; - struct pti_masterchannel mccontrol = {.master = CONTROL_ID, - .channel = 0}; - const char *thread_name_p; - const char *control_format = "%3d %3d %s"; - u8 control_frame[CONTROL_FRAME_LEN]; - - if (!thread_name) { - if (!in_interrupt()) - get_task_comm(comm, current); - else - strncpy(comm, "Interrupt", TASK_COMM_LEN); - - /* Absolutely ensure our buffer is zero terminated. */ - comm[TASK_COMM_LEN-1] = 0; - thread_name_p = comm; - } else { - thread_name_p = thread_name; - } - - mccontrol.channel = pti_control_channel; - pti_control_channel = (pti_control_channel + 1) & 0x7f; - - snprintf(control_frame, CONTROL_FRAME_LEN, control_format, mc->master, - mc->channel, thread_name_p); - pti_write_to_aperture(&mccontrol, control_frame, strlen(control_frame)); -} - -/** - * pti_write_full_frame_to_aperture()- high level function to - * write to PTI. - * - * @mc: The 'aperture'. It's part of a write address that holds - * a master and channel ID. - * @buf: Data being written to the HW that will ultimately be seen - * in a debugging tool (Fido, Lauterbach). - * @len: Size of buffer. - * - * All threads sending data (either console, user space application, ...) - * are calling the high level function to write to PTI meaning that it is - * possible to add a control frame before sending the content. - */ -static void pti_write_full_frame_to_aperture(struct pti_masterchannel *mc, - const unsigned char *buf, - int len) -{ - pti_control_frame_built_and_sent(mc, NULL); - pti_write_to_aperture(mc, (u8 *)buf, len); -} - -/** - * get_id()- Allocate a master and channel ID. - * - * @id_array: an array of bits representing what channel - * id's are allocated for writing. - * @max_ids: The max amount of available write IDs to use. - * @base_id: The starting SW channel ID, based on the Intel - * PTI arch. - * @thread_name: The thread name associated with the master / channel or - * 'NULL' if using the 'current' global variable. - * - * Returns: - * pti_masterchannel struct with master, channel ID address - * 0 for error - * - * Each bit in the arrays ia_app and ia_os correspond to a master and - * channel id. The bit is one if the id is taken and 0 if free. For - * every master there are 128 channel id's. - */ -static struct pti_masterchannel *get_id(u8 *id_array, - int max_ids, - int base_id, - const char *thread_name) -{ - struct pti_masterchannel *mc; - int i, j, mask; - - mc = kmalloc(sizeof(struct pti_masterchannel), GFP_KERNEL); - if (mc == NULL) - return NULL; - - /* look for a byte with a free bit */ - for (i = 0; i < max_ids; i++) - if (id_array[i] != 0xff) - break; - if (i == max_ids) { - kfree(mc); - return NULL; - } - /* find the bit in the 128 possible channel opportunities */ - mask = 0x80; - for (j = 0; j < 8; j++) { - if ((id_array[i] & mask) == 0) - break; - mask >>= 1; - } - - /* grab it */ - id_array[i] |= mask; - mc->master = base_id; - mc->channel = ((i & 0xf)<<3) + j; - /* write new master Id / channel Id allocation to channel control */ - pti_control_frame_built_and_sent(mc, thread_name); - return mc; -} - -/* - * The following three functions: - * pti_request_mastercahannel(), mipi_release_masterchannel() - * and pti_writedata() are an API for other kernel drivers to - * access PTI. - */ - -/** - * pti_request_masterchannel()- Kernel API function used to allocate - * a master, channel ID address - * to write to PTI HW. - * - * @type: 0- request Application master, channel aperture ID - * write address. - * 1- request OS master, channel aperture ID write - * address. - * 2- request Modem master, channel aperture ID - * write address. - * Other values, error. - * @thread_name: The thread name associated with the master / channel or - * 'NULL' if using the 'current' global variable. - * - * Returns: - * pti_masterchannel struct - * 0 for error - */ -struct pti_masterchannel *pti_request_masterchannel(u8 type, - const char *thread_name) -{ - struct pti_masterchannel *mc; - - mutex_lock(&alloclock); - - switch (type) { - - case 0: - mc = get_id(drv_data->ia_app, MAX_APP_IDS, - APP_BASE_ID, thread_name); - break; - - case 1: - mc = get_id(drv_data->ia_os, MAX_OS_IDS, - OS_BASE_ID, thread_name); - break; - - case 2: - mc = get_id(drv_data->ia_modem, MAX_MODEM_IDS, - MODEM_BASE_ID, thread_name); - break; - default: - mc = NULL; - } - - mutex_unlock(&alloclock); - return mc; -} -EXPORT_SYMBOL_GPL(pti_request_masterchannel); - -/** - * pti_release_masterchannel()- Kernel API function used to release - * a master, channel ID address - * used to write to PTI HW. - * - * @mc: master, channel apeture ID address to be released. This - * will de-allocate the structure via kfree(). - */ -void pti_release_masterchannel(struct pti_masterchannel *mc) -{ - u8 master, channel, i; - - mutex_lock(&alloclock); - - if (mc) { - master = mc->master; - channel = mc->channel; - - if (master == APP_BASE_ID) { - i = channel >> 3; - drv_data->ia_app[i] &= ~(0x80>>(channel & 0x7)); - } else if (master == OS_BASE_ID) { - i = channel >> 3; - drv_data->ia_os[i] &= ~(0x80>>(channel & 0x7)); - } else { - i = channel >> 3; - drv_data->ia_modem[i] &= ~(0x80>>(channel & 0x7)); - } - - kfree(mc); - } - - mutex_unlock(&alloclock); -} -EXPORT_SYMBOL_GPL(pti_release_masterchannel); - -/** - * pti_writedata()- Kernel API function used to write trace - * debugging data to PTI HW. - * - * @mc: Master, channel aperture ID address to write to. - * Null value will return with no write occurring. - * @buf: Trace debuging data to write to the PTI HW. - * Null value will return with no write occurring. - * @count: Size of buf. Value of 0 or a negative number will - * return with no write occuring. - */ -void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count) -{ - /* - * since this function is exported, this is treated like an - * API function, thus, all parameters should - * be checked for validity. - */ - if ((mc != NULL) && (buf != NULL) && (count > 0)) - pti_write_to_aperture(mc, buf, count); - return; -} -EXPORT_SYMBOL_GPL(pti_writedata); - -/* - * for the tty_driver_*() basic function descriptions, see tty_driver.h. - * Specific header comments made for PTI-related specifics. - */ - -/** - * pti_tty_driver_open()- Open an Application master, channel aperture - * ID to the PTI device via tty device. - * - * @tty: tty interface. - * @filp: filp interface pased to tty_port_open() call. - * - * Returns: - * int, 0 for success - * otherwise, fail value - * - * The main purpose of using the tty device interface is for - * each tty port to have a unique PTI write aperture. In an - * example use case, ttyPTI0 gets syslogd and an APP aperture - * ID and ttyPTI1 is where the n_tracesink ldisc hooks to route - * modem messages into PTI. Modem trace data does not have to - * go to ttyPTI1, but ttyPTI0 and ttyPTI1 do need to be distinct - * master IDs. These messages go through the PTI HW and out of - * the handheld platform and to the Fido/Lauterbach device. - */ -static int pti_tty_driver_open(struct tty_struct *tty, struct file *filp) -{ - /* - * we actually want to allocate a new channel per open, per - * system arch. HW gives more than plenty channels for a single - * system task to have its own channel to write trace data. This - * also removes a locking requirement for the actual write - * procedure. - */ - return tty_port_open(tty->port, tty, filp); -} - -/** - * pti_tty_driver_close()- close tty device and release Application - * master, channel aperture ID to the PTI device via tty device. - * - * @tty: tty interface. - * @filp: filp interface pased to tty_port_close() call. - * - * The main purpose of using the tty device interface is to route - * syslog daemon messages to the PTI HW and out of the handheld platform - * and to the Fido/Lauterbach device. - */ -static void pti_tty_driver_close(struct tty_struct *tty, struct file *filp) -{ - tty_port_close(tty->port, tty, filp); -} - -/** - * pti_tty_install()- Used to set up specific master-channels - * to tty ports for organizational purposes when - * tracing viewed from debuging tools. - * - * @driver: tty driver information. - * @tty: tty struct containing pti information. - * - * Returns: - * 0 for success - * otherwise, error - */ -static int pti_tty_install(struct tty_driver *driver, struct tty_struct *tty) -{ - int idx = tty->index; - struct pti_tty *pti_tty_data; - int ret = tty_standard_install(driver, tty); - - if (ret == 0) { - pti_tty_data = kmalloc(sizeof(struct pti_tty), GFP_KERNEL); - if (pti_tty_data == NULL) - return -ENOMEM; - - if (idx == PTITTY_MINOR_START) - pti_tty_data->mc = pti_request_masterchannel(0, NULL); - else - pti_tty_data->mc = pti_request_masterchannel(2, NULL); - - if (pti_tty_data->mc == NULL) { - kfree(pti_tty_data); - return -ENXIO; - } - tty->driver_data = pti_tty_data; - } - - return ret; -} - -/** - * pti_tty_cleanup()- Used to de-allocate master-channel resources - * tied to tty's of this driver. - * - * @tty: tty struct containing pti information. - */ -static void pti_tty_cleanup(struct tty_struct *tty) -{ - struct pti_tty *pti_tty_data = tty->driver_data; - if (pti_tty_data == NULL) - return; - pti_release_masterchannel(pti_tty_data->mc); - kfree(pti_tty_data); - tty->driver_data = NULL; -} - -/** - * pti_tty_driver_write()- Write trace debugging data through the char - * interface to the PTI HW. Part of the misc device implementation. - * - * @tty: tty struct containing pti information. - * @buf: trace data to be written. - * @len: # of byte to write. - * - * Returns: - * int, # of bytes written - * otherwise, error - */ -static int pti_tty_driver_write(struct tty_struct *tty, - const unsigned char *buf, int len) -{ - struct pti_tty *pti_tty_data = tty->driver_data; - if ((pti_tty_data != NULL) && (pti_tty_data->mc != NULL)) { - pti_write_to_aperture(pti_tty_data->mc, (u8 *)buf, len); - return len; - } - /* - * we can't write to the pti hardware if the private driver_data - * and the mc address is not there. - */ - else - return -EFAULT; -} - -/** - * pti_tty_write_room()- Always returns 2048. - * - * @tty: contains tty info of the pti driver. - */ -static int pti_tty_write_room(struct tty_struct *tty) -{ - return 2048; -} - -/** - * pti_char_open()- Open an Application master, channel aperture - * ID to the PTI device. Part of the misc device implementation. - * - * @inode: not used. - * @filp: Output- will have a masterchannel struct set containing - * the allocated application PTI aperture write address. - * - * Returns: - * int, 0 for success - * otherwise, a fail value - */ -static int pti_char_open(struct inode *inode, struct file *filp) -{ - struct pti_masterchannel *mc; - - /* - * We really do want to fail immediately if - * pti_request_masterchannel() fails, - * before assigning the value to filp->private_data. - * Slightly easier to debug if this driver needs debugging. - */ - mc = pti_request_masterchannel(0, NULL); - if (mc == NULL) - return -ENOMEM; - filp->private_data = mc; - return 0; -} - -/** - * pti_char_release()- Close a char channel to the PTI device. Part - * of the misc device implementation. - * - * @inode: Not used in this implementaiton. - * @filp: Contains private_data that contains the master, channel - * ID to be released by the PTI device. - * - * Returns: - * always 0 - */ -static int pti_char_release(struct inode *inode, struct file *filp) -{ - pti_release_masterchannel(filp->private_data); - filp->private_data = NULL; - return 0; -} - -/** - * pti_char_write()- Write trace debugging data through the char - * interface to the PTI HW. Part of the misc device implementation. - * - * @filp: Contains private data which is used to obtain - * master, channel write ID. - * @data: trace data to be written. - * @len: # of byte to write. - * @ppose: Not used in this function implementation. - * - * Returns: - * int, # of bytes written - * otherwise, error value - * - * Notes: From side discussions with Alan Cox and experimenting - * with PTI debug HW like Nokia's Fido box and Lauterbach - * devices, 8192 byte write buffer used by USER_COPY_SIZE was - * deemed an appropriate size for this type of usage with - * debugging HW. - */ -static ssize_t pti_char_write(struct file *filp, const char __user *data, - size_t len, loff_t *ppose) -{ - struct pti_masterchannel *mc; - void *kbuf; - const char __user *tmp; - size_t size = USER_COPY_SIZE; - size_t n = 0; - - tmp = data; - mc = filp->private_data; - - kbuf = kmalloc(size, GFP_KERNEL); - if (kbuf == NULL) { - pr_err("%s(%d): buf allocation failed\n", - __func__, __LINE__); - return -ENOMEM; - } - - do { - if (len - n > USER_COPY_SIZE) - size = USER_COPY_SIZE; - else - size = len - n; - - if (copy_from_user(kbuf, tmp, size)) { - kfree(kbuf); - return n ? n : -EFAULT; - } - - pti_write_to_aperture(mc, kbuf, size); - n += size; - tmp += size; - - } while (len > n); - - kfree(kbuf); - return len; -} - -static const struct tty_operations pti_tty_driver_ops = { - .open = pti_tty_driver_open, - .close = pti_tty_driver_close, - .write = pti_tty_driver_write, - .write_room = pti_tty_write_room, - .install = pti_tty_install, - .cleanup = pti_tty_cleanup -}; - -static const struct file_operations pti_char_driver_ops = { - .owner = THIS_MODULE, - .write = pti_char_write, - .open = pti_char_open, - .release = pti_char_release, -}; - -static struct miscdevice pti_char_driver = { - .minor = MISC_DYNAMIC_MINOR, - .name = CHARNAME, - .fops = &pti_char_driver_ops -}; - -/** - * pti_console_write()- Write to the console that has been acquired. - * - * @c: Not used in this implementaiton. - * @buf: Data to be written. - * @len: Length of buf. - */ -static void pti_console_write(struct console *c, const char *buf, unsigned len) -{ - static struct pti_masterchannel mc = {.master = CONSOLE_ID, - .channel = 0}; - - mc.channel = pti_console_channel; - pti_console_channel = (pti_console_channel + 1) & 0x7f; - - pti_write_full_frame_to_aperture(&mc, buf, len); -} - -/** - * pti_console_device()- Return the driver tty structure and set the - * associated index implementation. - * - * @c: Console device of the driver. - * @index: index associated with c. - * - * Returns: - * always value of pti_tty_driver structure when this function - * is called. - */ -static struct tty_driver *pti_console_device(struct console *c, int *index) -{ - *index = c->index; - return pti_tty_driver; -} - -/** - * pti_console_setup()- Initialize console variables used by the driver. - * - * @c: Not used. - * @opts: Not used. - * - * Returns: - * always 0. - */ -static int pti_console_setup(struct console *c, char *opts) -{ - pti_console_channel = 0; - pti_control_channel = 0; - return 0; -} - -/* - * pti_console struct, used to capture OS printk()'s and shift - * out to the PTI device for debugging. This cannot be - * enabled upon boot because of the possibility of eating - * any serial console printk's (race condition discovered). - * The console should be enabled upon when the tty port is - * used for the first time. Since the primary purpose for - * the tty port is to hook up syslog to it, the tty port - * will be open for a really long time. - */ -static struct console pti_console = { - .name = TTYNAME, - .write = pti_console_write, - .device = pti_console_device, - .setup = pti_console_setup, - .flags = CON_PRINTBUFFER, - .index = 0, -}; - -/** - * pti_port_activate()- Used to start/initialize any items upon - * first opening of tty_port(). - * - * @port: The tty port number of the PTI device. - * @tty: The tty struct associated with this device. - * - * Returns: - * always returns 0 - * - * Notes: The primary purpose of the PTI tty port 0 is to hook - * the syslog daemon to it; thus this port will be open for a - * very long time. - */ -static int pti_port_activate(struct tty_port *port, struct tty_struct *tty) -{ - if (port->tty->index == PTITTY_MINOR_START) - console_start(&pti_console); - return 0; -} - -/** - * pti_port_shutdown()- Used to stop/shutdown any items upon the - * last tty port close. - * - * @port: The tty port number of the PTI device. - * - * Notes: The primary purpose of the PTI tty port 0 is to hook - * the syslog daemon to it; thus this port will be open for a - * very long time. - */ -static void pti_port_shutdown(struct tty_port *port) -{ - if (port->tty->index == PTITTY_MINOR_START) - console_stop(&pti_console); -} - -static const struct tty_port_operations tty_port_ops = { - .activate = pti_port_activate, - .shutdown = pti_port_shutdown, -}; - -/* - * Note the _probe() call sets everything up and ties the char and tty - * to successfully detecting the PTI device on the pci bus. - */ - -/** - * pti_pci_probe()- Used to detect pti on the pci bus and set - * things up in the driver. - * - * @pdev: pci_dev struct values for pti. - * @ent: pci_device_id struct for pti driver. - * - * Returns: - * 0 for success - * otherwise, error - */ -static int pti_pci_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - unsigned int a; - int retval; - int pci_bar = 1; - - dev_dbg(&pdev->dev, "%s %s(%d): PTI PCI ID %04x:%04x\n", __FILE__, - __func__, __LINE__, pdev->vendor, pdev->device); - - retval = misc_register(&pti_char_driver); - if (retval) { - pr_err("%s(%d): CHAR registration failed of pti driver\n", - __func__, __LINE__); - pr_err("%s(%d): Error value returned: %d\n", - __func__, __LINE__, retval); - goto err; - } - - retval = pci_enable_device(pdev); - if (retval != 0) { - dev_err(&pdev->dev, - "%s: pci_enable_device() returned error %d\n", - __func__, retval); - goto err_unreg_misc; - } - - drv_data = kzalloc(sizeof(*drv_data), GFP_KERNEL); - if (drv_data == NULL) { - retval = -ENOMEM; - dev_err(&pdev->dev, - "%s(%d): kmalloc() returned NULL memory.\n", - __func__, __LINE__); - goto err_disable_pci; - } - drv_data->pti_addr = pci_resource_start(pdev, pci_bar); - - retval = pci_request_region(pdev, pci_bar, dev_name(&pdev->dev)); - if (retval != 0) { - dev_err(&pdev->dev, - "%s(%d): pci_request_region() returned error %d\n", - __func__, __LINE__, retval); - goto err_free_dd; - } - drv_data->aperture_base = drv_data->pti_addr+APERTURE_14; - drv_data->pti_ioaddr = - ioremap((u32)drv_data->aperture_base, - APERTURE_LEN); - if (!drv_data->pti_ioaddr) { - retval = -ENOMEM; - goto err_rel_reg; - } - - pci_set_drvdata(pdev, drv_data); - - for (a = 0; a < PTITTY_MINOR_NUM; a++) { - struct tty_port *port = &drv_data->port[a]; - tty_port_init(port); - port->ops = &tty_port_ops; - - tty_port_register_device(port, pti_tty_driver, a, &pdev->dev); - } - - register_console(&pti_console); - - return 0; -err_rel_reg: - pci_release_region(pdev, pci_bar); -err_free_dd: - kfree(drv_data); -err_disable_pci: - pci_disable_device(pdev); -err_unreg_misc: - misc_deregister(&pti_char_driver); -err: - return retval; -} - -/** - * pti_pci_remove()- Driver exit method to remove PTI from - * PCI bus. - * @pdev: variable containing pci info of PTI. - */ -static void pti_pci_remove(struct pci_dev *pdev) -{ - struct pti_dev *drv_data = pci_get_drvdata(pdev); - unsigned int a; - - unregister_console(&pti_console); - - for (a = 0; a < PTITTY_MINOR_NUM; a++) { - tty_unregister_device(pti_tty_driver, a); - tty_port_destroy(&drv_data->port[a]); - } - - iounmap(drv_data->pti_ioaddr); - kfree(drv_data); - pci_release_region(pdev, 1); - pci_disable_device(pdev); - - misc_deregister(&pti_char_driver); -} - -static struct pci_driver pti_pci_driver = { - .name = PCINAME, - .id_table = pci_ids, - .probe = pti_pci_probe, - .remove = pti_pci_remove, -}; - -/** - * pti_init()- Overall entry/init call to the pti driver. - * It starts the registration process with the kernel. - * - * Returns: - * int __init, 0 for success - * otherwise value is an error - * - */ -static int __init pti_init(void) -{ - int retval; - - /* First register module as tty device */ - - pti_tty_driver = alloc_tty_driver(PTITTY_MINOR_NUM); - if (pti_tty_driver == NULL) { - pr_err("%s(%d): Memory allocation failed for ptiTTY driver\n", - __func__, __LINE__); - return -ENOMEM; - } - - pti_tty_driver->driver_name = DRIVERNAME; - pti_tty_driver->name = TTYNAME; - pti_tty_driver->major = 0; - pti_tty_driver->minor_start = PTITTY_MINOR_START; - pti_tty_driver->type = TTY_DRIVER_TYPE_SYSTEM; - pti_tty_driver->subtype = SYSTEM_TYPE_SYSCONS; - pti_tty_driver->flags = TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV; - pti_tty_driver->init_termios = tty_std_termios; - - tty_set_operations(pti_tty_driver, &pti_tty_driver_ops); - - retval = tty_register_driver(pti_tty_driver); - if (retval) { - pr_err("%s(%d): TTY registration failed of pti driver\n", - __func__, __LINE__); - pr_err("%s(%d): Error value returned: %d\n", - __func__, __LINE__, retval); - - goto put_tty; - } - - retval = pci_register_driver(&pti_pci_driver); - if (retval) { - pr_err("%s(%d): PCI registration failed of pti driver\n", - __func__, __LINE__); - pr_err("%s(%d): Error value returned: %d\n", - __func__, __LINE__, retval); - goto unreg_tty; - } - - return 0; -unreg_tty: - tty_unregister_driver(pti_tty_driver); -put_tty: - put_tty_driver(pti_tty_driver); - pti_tty_driver = NULL; - return retval; -} - -/** - * pti_exit()- Unregisters this module as a tty and pci driver. - */ -static void __exit pti_exit(void) -{ - tty_unregister_driver(pti_tty_driver); - pci_unregister_driver(&pti_pci_driver); - put_tty_driver(pti_tty_driver); -} - -module_init(pti_init); -module_exit(pti_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Ken Mills, Jay Freyensee"); -MODULE_DESCRIPTION("PTI Driver"); - diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile index b3ccae932660..730de6bf048b 100644 --- a/drivers/tty/Makefile +++ b/drivers/tty/Makefile @@ -9,8 +9,6 @@ obj-$(CONFIG_AUDIT) += tty_audit.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o obj-$(CONFIG_N_HDLC) += n_hdlc.o obj-$(CONFIG_N_GSM) += n_gsm.o -obj-$(CONFIG_TRACE_ROUTER) += n_tracerouter.o -obj-$(CONFIG_TRACE_SINK) += n_tracesink.o obj-$(CONFIG_R3964) += n_r3964.o obj-y += vt/ diff --git a/drivers/tty/n_tracerouter.c b/drivers/tty/n_tracerouter.c deleted file mode 100644 index 4479af4d2fa5..000000000000 --- a/drivers/tty/n_tracerouter.c +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * n_tracerouter.c - Trace data router through tty space - * - * Copyright (C) Intel 2011 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This trace router uses the Linux line discipline framework to route - * trace data coming from a HW Modem to a PTI (Parallel Trace Module) port. - * The solution is not specific to a HW modem and this line disciple can - * be used to route any stream of data in kernel space. - * This is part of a solution for the P1149.7, compact JTAG, standard. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/ioctl.h> -#include <linux/tty.h> -#include <linux/tty_ldisc.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mutex.h> -#include <linux/slab.h> -#include <linux/bug.h> -#include "n_tracesink.h" - -/* - * Other ldisc drivers use 65536 which basically means, - * 'I can always accept 64k' and flow control is off. - * This number is deemed appropriate for this driver. - */ -#define RECEIVE_ROOM 65536 -#define DRIVERNAME "n_tracerouter" - -/* - * struct to hold private configuration data for this ldisc. - * opencalled is used to hold if this ldisc has been opened. - * kref_tty holds the tty reference the ldisc sits on top of. - */ -struct tracerouter_data { - u8 opencalled; - struct tty_struct *kref_tty; -}; -static struct tracerouter_data *tr_data; - -/* lock for when tty reference is being used */ -static DEFINE_MUTEX(routelock); - -/** - * n_tracerouter_open() - Called when a tty is opened by a SW entity. - * @tty: terminal device to the ldisc. - * - * Return: - * 0 for success. - * - * Caveats: This should only be opened one time per SW entity. - */ -static int n_tracerouter_open(struct tty_struct *tty) -{ - int retval = -EEXIST; - - mutex_lock(&routelock); - if (tr_data->opencalled == 0) { - - tr_data->kref_tty = tty_kref_get(tty); - if (tr_data->kref_tty == NULL) { - retval = -EFAULT; - } else { - tr_data->opencalled = 1; - tty->disc_data = tr_data; - tty->receive_room = RECEIVE_ROOM; - tty_driver_flush_buffer(tty); - retval = 0; - } - } - mutex_unlock(&routelock); - return retval; -} - -/** - * n_tracerouter_close() - close connection - * @tty: terminal device to the ldisc. - * - * Called when a software entity wants to close a connection. - */ -static void n_tracerouter_close(struct tty_struct *tty) -{ - struct tracerouter_data *tptr = tty->disc_data; - - mutex_lock(&routelock); - WARN_ON(tptr->kref_tty != tr_data->kref_tty); - tty_driver_flush_buffer(tty); - tty_kref_put(tr_data->kref_tty); - tr_data->kref_tty = NULL; - tr_data->opencalled = 0; - tty->disc_data = NULL; - mutex_unlock(&routelock); -} - -/** - * n_tracerouter_read() - read request from user space - * @tty: terminal device passed into the ldisc. - * @file: pointer to open file object. - * @buf: pointer to the data buffer that gets eventually returned. - * @nr: number of bytes of the data buffer that is returned. - * - * function that allows read() functionality in userspace. By default if this - * is not implemented it returns -EIO. This module is functioning like a - * router via n_tracerouter_receivebuf(), and there is no real requirement - * to implement this function. However, an error return value other than - * -EIO should be used just to show that there was an intent not to have - * this function implemented. Return value based on read() man pages. - * - * Return: - * -EINVAL - */ -static ssize_t n_tracerouter_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) { - return -EINVAL; -} - -/** - * n_tracerouter_write() - Function that allows write() in userspace. - * @tty: terminal device passed into the ldisc. - * @file: pointer to open file object. - * @buf: pointer to the data buffer that gets eventually returned. - * @nr: number of bytes of the data buffer that is returned. - * - * By default if this is not implemented, it returns -EIO. - * This should not be implemented, ever, because - * 1. this driver is functioning like a router via - * n_tracerouter_receivebuf() - * 2. No writes to HW will ever go through this line discpline driver. - * However, an error return value other than -EIO should be used - * just to show that there was an intent not to have this function - * implemented. Return value based on write() man pages. - * - * Return: - * -EINVAL - */ -static ssize_t n_tracerouter_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr) { - return -EINVAL; -} - -/** - * n_tracerouter_receivebuf() - Routing function for driver. - * @tty: terminal device passed into the ldisc. It's assumed - * tty will never be NULL. - * @cp: buffer, block of characters to be eventually read by - * someone, somewhere (user read() call or some kernel function). - * @fp: flag buffer. - * @count: number of characters (aka, bytes) in cp. - * - * This function takes the input buffer, cp, and passes it to - * an external API function for processing. - */ -static void n_tracerouter_receivebuf(struct tty_struct *tty, - const unsigned char *cp, - char *fp, int count) -{ - mutex_lock(&routelock); - n_tracesink_datadrain((u8 *) cp, count); - mutex_unlock(&routelock); -} - -/* - * Flush buffer is not impelemented as the ldisc has no internal buffering - * so the tty_driver_flush_buffer() is sufficient for this driver's needs. - */ - -static struct tty_ldisc_ops tty_ptirouter_ldisc = { - .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, - .name = DRIVERNAME, - .open = n_tracerouter_open, - .close = n_tracerouter_close, - .read = n_tracerouter_read, - .write = n_tracerouter_write, - .receive_buf = n_tracerouter_receivebuf -}; - -/** - * n_tracerouter_init - module initialisation - * - * Registers this module as a line discipline driver. - * - * Return: - * 0 for success, any other value error. - */ -static int __init n_tracerouter_init(void) -{ - int retval; - - tr_data = kzalloc(sizeof(struct tracerouter_data), GFP_KERNEL); - if (tr_data == NULL) - return -ENOMEM; - - - /* Note N_TRACEROUTER is defined in linux/tty.h */ - retval = tty_register_ldisc(N_TRACEROUTER, &tty_ptirouter_ldisc); - if (retval < 0) { - pr_err("%s: Registration failed: %d\n", __func__, retval); - kfree(tr_data); - } - return retval; -} - -/** - * n_tracerouter_exit - module unload - * - * Removes this module as a line discipline driver. - */ -static void __exit n_tracerouter_exit(void) -{ - int retval = tty_unregister_ldisc(N_TRACEROUTER); - - if (retval < 0) - pr_err("%s: Unregistration failed: %d\n", __func__, retval); - else - kfree(tr_data); -} - -module_init(n_tracerouter_init); -module_exit(n_tracerouter_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jay Freyensee"); -MODULE_ALIAS_LDISC(N_TRACEROUTER); -MODULE_DESCRIPTION("Trace router ldisc driver"); diff --git a/drivers/tty/n_tracesink.c b/drivers/tty/n_tracesink.c deleted file mode 100644 index d96ba82cc356..000000000000 --- a/drivers/tty/n_tracesink.c +++ /dev/null @@ -1,228 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * n_tracesink.c - Trace data router and sink path through tty space. - * - * Copyright (C) Intel 2011 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * The trace sink uses the Linux line discipline framework to receive - * trace data coming from the PTI source line discipline driver - * to a user-desired tty port, like USB. - * This is to provide a way to extract modem trace data on - * devices that do not have a PTI HW module, or just need modem - * trace data to come out of a different HW output port. - * This is part of a solution for the P1149.7, compact JTAG, standard. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/ioctl.h> -#include <linux/tty.h> -#include <linux/tty_ldisc.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/bug.h> -#include "n_tracesink.h" - -/* - * Other ldisc drivers use 65536 which basically means, - * 'I can always accept 64k' and flow control is off. - * This number is deemed appropriate for this driver. - */ -#define RECEIVE_ROOM 65536 -#define DRIVERNAME "n_tracesink" - -/* - * there is a quirk with this ldisc is he can write data - * to a tty from anyone calling his kernel API, which - * meets customer requirements in the drivers/misc/pti.c - * project. So he needs to know when he can and cannot write when - * the API is called. In theory, the API can be called - * after an init() but before a successful open() which - * would crash the system if tty is not checked. - */ -static struct tty_struct *this_tty; -static DEFINE_MUTEX(writelock); - -/** - * n_tracesink_open() - Called when a tty is opened by a SW entity. - * @tty: terminal device to the ldisc. - * - * Return: - * 0 for success, - * -EFAULT = couldn't get a tty kref n_tracesink will sit - * on top of - * -EEXIST = open() called successfully once and it cannot - * be called again. - * - * Caveats: open() should only be successful the first time a - * SW entity calls it. - */ -static int n_tracesink_open(struct tty_struct *tty) -{ - int retval = -EEXIST; - - mutex_lock(&writelock); - if (this_tty == NULL) { - this_tty = tty_kref_get(tty); - if (this_tty == NULL) { - retval = -EFAULT; - } else { - tty->disc_data = this_tty; - tty_driver_flush_buffer(tty); - retval = 0; - } - } - mutex_unlock(&writelock); - - return retval; -} - -/** - * n_tracesink_close() - close connection - * @tty: terminal device to the ldisc. - * - * Called when a software entity wants to close a connection. - */ -static void n_tracesink_close(struct tty_struct *tty) -{ - mutex_lock(&writelock); - tty_driver_flush_buffer(tty); - tty_kref_put(this_tty); - this_tty = NULL; - tty->disc_data = NULL; - mutex_unlock(&writelock); -} - -/** - * n_tracesink_read() - read request from user space - * @tty: terminal device passed into the ldisc. - * @file: pointer to open file object. - * @buf: pointer to the data buffer that gets eventually returned. - * @nr: number of bytes of the data buffer that is returned. - * - * function that allows read() functionality in userspace. By default if this - * is not implemented it returns -EIO. This module is functioning like a - * router via n_tracesink_receivebuf(), and there is no real requirement - * to implement this function. However, an error return value other than - * -EIO should be used just to show that there was an intent not to have - * this function implemented. Return value based on read() man pages. - * - * Return: - * -EINVAL - */ -static ssize_t n_tracesink_read(struct tty_struct *tty, struct file *file, - unsigned char __user *buf, size_t nr) { - return -EINVAL; -} - -/** - * n_tracesink_write() - Function that allows write() in userspace. - * @tty: terminal device passed into the ldisc. - * @file: pointer to open file object. - * @buf: pointer to the data buffer that gets eventually returned. - * @nr: number of bytes of the data buffer that is returned. - * - * By default if this is not implemented, it returns -EIO. - * This should not be implemented, ever, because - * 1. this driver is functioning like a router via - * n_tracesink_receivebuf() - * 2. No writes to HW will ever go through this line discpline driver. - * However, an error return value other than -EIO should be used - * just to show that there was an intent not to have this function - * implemented. Return value based on write() man pages. - * - * Return: - * -EINVAL - */ -static ssize_t n_tracesink_write(struct tty_struct *tty, struct file *file, - const unsigned char *buf, size_t nr) { - return -EINVAL; -} - -/** - * n_tracesink_datadrain() - Kernel API function used to route - * trace debugging data to user-defined - * port like USB. - * - * @buf: Trace debuging data buffer to write to tty target - * port. Null value will return with no write occurring. - * @count: Size of buf. Value of 0 or a negative number will - * return with no write occuring. - * - * Caveat: If this line discipline does not set the tty it sits - * on top of via an open() call, this API function will not - * call the tty's write() call because it will have no pointer - * to call the write(). - */ -void n_tracesink_datadrain(u8 *buf, int count) -{ - mutex_lock(&writelock); - - if ((buf != NULL) && (count > 0) && (this_tty != NULL)) - this_tty->ops->write(this_tty, buf, count); - - mutex_unlock(&writelock); -} -EXPORT_SYMBOL_GPL(n_tracesink_datadrain); - -/* - * Flush buffer is not impelemented as the ldisc has no internal buffering - * so the tty_driver_flush_buffer() is sufficient for this driver's needs. - */ - -/* - * tty_ldisc function operations for this driver. - */ -static struct tty_ldisc_ops tty_n_tracesink = { - .owner = THIS_MODULE, - .magic = TTY_LDISC_MAGIC, - .name = DRIVERNAME, - .open = n_tracesink_open, - .close = n_tracesink_close, - .read = n_tracesink_read, - .write = n_tracesink_write -}; - -/** - * n_tracesink_init- module initialisation - * - * Registers this module as a line discipline driver. - * - * Return: - * 0 for success, any other value error. - */ -static int __init n_tracesink_init(void) -{ - /* Note N_TRACESINK is defined in linux/tty.h */ - int retval = tty_register_ldisc(N_TRACESINK, &tty_n_tracesink); - - if (retval < 0) - pr_err("%s: Registration failed: %d\n", __func__, retval); - - return retval; -} - -/** - * n_tracesink_exit - module unload - * - * Removes this module as a line discipline driver. - */ -static void __exit n_tracesink_exit(void) -{ - int retval = tty_unregister_ldisc(N_TRACESINK); - - if (retval < 0) - pr_err("%s: Unregistration failed: %d\n", __func__, retval); -} - -module_init(n_tracesink_init); -module_exit(n_tracesink_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jay Freyensee"); -MODULE_ALIAS_LDISC(N_TRACESINK); -MODULE_DESCRIPTION("Trace sink ldisc driver"); diff --git a/drivers/tty/n_tracesink.h b/drivers/tty/n_tracesink.h deleted file mode 100644 index 7031d515a700..000000000000 --- a/drivers/tty/n_tracesink.h +++ /dev/null @@ -1,26 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * n_tracesink.h - Kernel driver API to route trace data in kernel space. - * - * Copyright (C) Intel 2011 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * The PTI (Parallel Trace Interface) driver directs trace data routed from - * various parts in the system out through the Intel Penwell PTI port and - * out of the mobile device for analysis with a debugging tool - * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, - * compact JTAG, standard. - * - * This header file is used by n_tracerouter to be able to send the - * data of it's tty port to the tty port this module sits. This - * mechanism can also be used independent of the PTI module. - * - */ - -#ifndef N_TRACESINK_H_ -#define N_TRACESINK_H_ - -void n_tracesink_datadrain(u8 *buf, int count); - -#endif |