diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/platform/x86/Kconfig | 7 | ||||
-rw-r--r-- | drivers/platform/x86/Makefile | 1 | ||||
-rw-r--r-- | drivers/platform/x86/intel_pmic_gpio.c | 326 |
3 files changed, 0 insertions, 334 deletions
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index 59aa8e302bc3..49a594855f98 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -816,13 +816,6 @@ config INTEL_SCU_IPC_UTIL low level access for debug work and updating the firmware. Say N unless you will be doing this on an Intel MID platform. -config GPIO_INTEL_PMIC - bool "Intel PMIC GPIO support" - depends on INTEL_SCU_IPC && GPIOLIB - ---help--- - Say Y here to support GPIO via the SCU IPC interface - on Intel MID platforms. - config INTEL_MID_POWER_BUTTON tristate "power button driver for Intel MID platforms" depends on INTEL_SCU_IPC && INPUT diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile index d4111f0f8a78..b2f52a7690af 100644 --- a/drivers/platform/x86/Makefile +++ b/drivers/platform/x86/Makefile @@ -50,7 +50,6 @@ obj-$(CONFIG_INTEL_SCU_IPC) += intel_scu_ipc.o obj-$(CONFIG_INTEL_SCU_IPC_UTIL) += intel_scu_ipcutil.o obj-$(CONFIG_INTEL_MFLD_THERMAL) += intel_mid_thermal.o obj-$(CONFIG_INTEL_IPS) += intel_ips.o -obj-$(CONFIG_GPIO_INTEL_PMIC) += intel_pmic_gpio.o obj-$(CONFIG_XO1_RFKILL) += xo1-rfkill.o obj-$(CONFIG_XO15_EBOOK) += xo15-ebook.o obj-$(CONFIG_IBM_RTL) += ibm_rtl.o diff --git a/drivers/platform/x86/intel_pmic_gpio.c b/drivers/platform/x86/intel_pmic_gpio.c deleted file mode 100644 index 91ae58510d92..000000000000 --- a/drivers/platform/x86/intel_pmic_gpio.c +++ /dev/null @@ -1,326 +0,0 @@ -/* Moorestown PMIC GPIO (access through IPC) driver - * Copyright (c) 2008 - 2009, Intel Corporation. - * - * Author: Alek Du <alek.du@intel.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -/* Supports: - * Moorestown platform PMIC chip - */ - -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/stddef.h> -#include <linux/slab.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio/driver.h> -#include <asm/intel_scu_ipc.h> -#include <linux/device.h> -#include <linux/intel_pmic_gpio.h> -#include <linux/platform_device.h> - -#define DRIVER_NAME "pmic_gpio" - -/* register offset that IPC driver should use - * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO - */ -enum pmic_gpio_register { - GPIO0 = 0xE0, - GPIO7 = 0xE7, - GPIOINT = 0xE8, - GPOSWCTL0 = 0xEC, - GPOSWCTL5 = 0xF1, - GPO = 0xF4, -}; - -/* bits definition for GPIO & GPOSW */ -#define GPIO_DRV 0x01 -#define GPIO_DIR 0x02 -#define GPIO_DIN 0x04 -#define GPIO_DOU 0x08 -#define GPIO_INTCTL 0x30 -#define GPIO_DBC 0xc0 - -#define GPOSW_DRV 0x01 -#define GPOSW_DOU 0x08 -#define GPOSW_RDRV 0x30 - -#define GPIO_UPDATE_TYPE 0x80000000 - -#define NUM_GPIO 24 - -struct pmic_gpio { - struct mutex buslock; - struct gpio_chip chip; - void *gpiointr; - int irq; - unsigned irq_base; - unsigned int update_type; - u32 trigger_type; -}; - -static void pmic_program_irqtype(int gpio, int type) -{ - if (type & IRQ_TYPE_EDGE_RISING) - intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20); - else - intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20); - - if (type & IRQ_TYPE_EDGE_FALLING) - intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10); - else - intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10); -}; - -static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - if (offset >= 8) { - pr_err("only pin 0-7 support input\n"); - return -1;/* we only have 8 GPIO can use as input */ - } - return intel_scu_ipc_update_register(GPIO0 + offset, - GPIO_DIR, GPIO_DIR); -} - -static int pmic_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - int rc = 0; - - if (offset < 8)/* it is GPIO */ - rc = intel_scu_ipc_update_register(GPIO0 + offset, - GPIO_DRV | (value ? GPIO_DOU : 0), - GPIO_DRV | GPIO_DOU | GPIO_DIR); - else if (offset < 16)/* it is GPOSW */ - rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, - GPOSW_DRV | (value ? GPOSW_DOU : 0), - GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); - else if (offset > 15 && offset < 24)/* it is GPO */ - rc = intel_scu_ipc_update_register(GPO, - value ? 1 << (offset - 16) : 0, - 1 << (offset - 16)); - else { - pr_err("invalid PMIC GPIO pin %d!\n", offset); - WARN_ON(1); - } - - return rc; -} - -static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - u8 r; - int ret; - - /* we only have 8 GPIO pins we can use as input */ - if (offset >= 8) - return -EOPNOTSUPP; - ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r); - if (ret < 0) - return ret; - return r & GPIO_DIN; -} - -static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - if (offset < 8)/* it is GPIO */ - intel_scu_ipc_update_register(GPIO0 + offset, - GPIO_DRV | (value ? GPIO_DOU : 0), - GPIO_DRV | GPIO_DOU); - else if (offset < 16)/* it is GPOSW */ - intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8, - GPOSW_DRV | (value ? GPOSW_DOU : 0), - GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV); - else if (offset > 15 && offset < 24) /* it is GPO */ - intel_scu_ipc_update_register(GPO, - value ? 1 << (offset - 16) : 0, - 1 << (offset - 16)); -} - -/* - * This is called from genirq with pg->buslock locked and - * irq_desc->lock held. We can not access the scu bus here, so we - * store the change and update in the bus_sync_unlock() function below - */ -static int pmic_irq_type(struct irq_data *data, unsigned type) -{ - struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); - u32 gpio = data->irq - pg->irq_base; - - if (gpio >= pg->chip.ngpio) - return -EINVAL; - - pg->trigger_type = type; - pg->update_type = gpio | GPIO_UPDATE_TYPE; - return 0; -} - -static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct pmic_gpio *pg = gpiochip_get_data(chip); - - return pg->irq_base + offset; -} - -static void pmic_bus_lock(struct irq_data *data) -{ - struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); - - mutex_lock(&pg->buslock); -} - -static void pmic_bus_sync_unlock(struct irq_data *data) -{ - struct pmic_gpio *pg = irq_data_get_irq_chip_data(data); - - if (pg->update_type) { - unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE; - - pmic_program_irqtype(gpio, pg->trigger_type); - pg->update_type = 0; - } - mutex_unlock(&pg->buslock); -} - -/* the gpiointr register is read-clear, so just do nothing. */ -static void pmic_irq_unmask(struct irq_data *data) { } - -static void pmic_irq_mask(struct irq_data *data) { } - -static struct irq_chip pmic_irqchip = { - .name = "PMIC-GPIO", - .irq_mask = pmic_irq_mask, - .irq_unmask = pmic_irq_unmask, - .irq_set_type = pmic_irq_type, - .irq_bus_lock = pmic_bus_lock, - .irq_bus_sync_unlock = pmic_bus_sync_unlock, -}; - -static irqreturn_t pmic_irq_handler(int irq, void *data) -{ - struct pmic_gpio *pg = data; - u8 intsts = *((u8 *)pg->gpiointr + 4); - int gpio; - irqreturn_t ret = IRQ_NONE; - - for (gpio = 0; gpio < 8; gpio++) { - if (intsts & (1 << gpio)) { - pr_debug("pmic pin %d triggered\n", gpio); - generic_handle_irq(pg->irq_base + gpio); - ret = IRQ_HANDLED; - } - } - return ret; -} - -static int platform_pmic_gpio_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - int irq = platform_get_irq(pdev, 0); - struct intel_pmic_gpio_platform_data *pdata = dev->platform_data; - - struct pmic_gpio *pg; - int retval; - int i; - - if (irq < 0) { - dev_dbg(dev, "no IRQ line\n"); - return -EINVAL; - } - - if (!pdata || !pdata->gpio_base || !pdata->irq_base) { - dev_dbg(dev, "incorrect or missing platform data\n"); - return -EINVAL; - } - - pg = kzalloc(sizeof(*pg), GFP_KERNEL); - if (!pg) - return -ENOMEM; - - dev_set_drvdata(dev, pg); - - pg->irq = irq; - /* setting up SRAM mapping for GPIOINT register */ - pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8); - if (!pg->gpiointr) { - pr_err("Can not map GPIOINT\n"); - retval = -EINVAL; - goto err2; - } - pg->irq_base = pdata->irq_base; - pg->chip.label = "intel_pmic"; - pg->chip.direction_input = pmic_gpio_direction_input; - pg->chip.direction_output = pmic_gpio_direction_output; - pg->chip.get = pmic_gpio_get; - pg->chip.set = pmic_gpio_set; - pg->chip.to_irq = pmic_gpio_to_irq; - pg->chip.base = pdata->gpio_base; - pg->chip.ngpio = NUM_GPIO; - pg->chip.can_sleep = 1; - pg->chip.parent = dev; - - mutex_init(&pg->buslock); - - pg->chip.parent = dev; - retval = gpiochip_add_data(&pg->chip, pg); - if (retval) { - pr_err("Can not add pmic gpio chip\n"); - goto err; - } - - retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg); - if (retval) { - pr_warn("Interrupt request failed\n"); - goto fail_request_irq; - } - - for (i = 0; i < 8; i++) { - irq_set_chip_and_handler_name(i + pg->irq_base, - &pmic_irqchip, - handle_simple_irq, - "demux"); - irq_set_chip_data(i + pg->irq_base, pg); - } - return 0; - -fail_request_irq: - gpiochip_remove(&pg->chip); -err: - iounmap(pg->gpiointr); -err2: - kfree(pg); - return retval; -} - -/* at the same time, register a platform driver - * this supports the sfi 0.81 fw */ -static struct platform_driver platform_pmic_gpio_driver = { - .driver = { - .name = DRIVER_NAME, - }, - .probe = platform_pmic_gpio_probe, -}; - -static int __init platform_pmic_gpio_init(void) -{ - return platform_driver_register(&platform_pmic_gpio_driver); -} -subsys_initcall(platform_pmic_gpio_init); |