diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/input/joystick/xpad.c | 4 | ||||
-rw-r--r-- | drivers/input/misc/cpcap-pwrbutton.c | 12 | ||||
-rw-r--r-- | drivers/input/misc/powermate.c | 1 | ||||
-rw-r--r-- | drivers/input/mouse/elantech.c | 1 | ||||
-rw-r--r-- | drivers/input/mouse/psmouse-smbus.c | 19 | ||||
-rw-r--r-- | drivers/input/mouse/synaptics.c | 2 | ||||
-rw-r--r-- | drivers/input/rmi4/rmi_smbus.c | 50 | ||||
-rw-r--r-- | drivers/input/serio/i8042-acpipnpio.h | 15 | ||||
-rw-r--r-- | drivers/input/touchscreen/exc3000.c | 10 | ||||
-rw-r--r-- | drivers/input/touchscreen/goodix.c | 20 |
10 files changed, 90 insertions, 44 deletions
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index ede380551e55..f5c21565bb3c 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -130,6 +130,7 @@ static const struct xpad_device { { 0x0079, 0x18d4, "GPD Win 2 X-Box Controller", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff01, "Wooting One (Legacy)", 0, XTYPE_XBOX360 }, { 0x03eb, 0xff02, "Wooting Two (Legacy)", 0, XTYPE_XBOX360 }, + { 0x03f0, 0x0495, "HyperX Clutch Gladiate", 0, XTYPE_XBOXONE }, { 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX }, { 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX }, @@ -272,6 +273,7 @@ static const struct xpad_device { { 0x1038, 0x1430, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x1038, 0x1431, "SteelSeries Stratus Duo", 0, XTYPE_XBOX360 }, { 0x11c9, 0x55f0, "Nacon GC-100XF", 0, XTYPE_XBOX360 }, + { 0x11ff, 0x0511, "PXN V900", 0, XTYPE_XBOX360 }, { 0x1209, 0x2882, "Ardwiino Controller", 0, XTYPE_XBOX360 }, { 0x12ab, 0x0004, "Honey Bee Xbox360 dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 }, { 0x12ab, 0x0301, "PDP AFTERGLOW AX.1", 0, XTYPE_XBOX360 }, @@ -459,6 +461,7 @@ static const struct usb_device_id xpad_table[] = { { USB_INTERFACE_INFO('X', 'B', 0) }, /* Xbox USB-IF not-approved class */ XPAD_XBOX360_VENDOR(0x0079), /* GPD Win 2 controller */ XPAD_XBOX360_VENDOR(0x03eb), /* Wooting Keyboards (Legacy) */ + XPAD_XBOXONE_VENDOR(0x03f0), /* HP HyperX Xbox One controllers */ XPAD_XBOX360_VENDOR(0x044f), /* Thrustmaster Xbox 360 controllers */ XPAD_XBOX360_VENDOR(0x045e), /* Microsoft Xbox 360 controllers */ XPAD_XBOXONE_VENDOR(0x045e), /* Microsoft Xbox One controllers */ @@ -477,6 +480,7 @@ static const struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x1038), /* SteelSeries controllers */ XPAD_XBOXONE_VENDOR(0x10f5), /* Turtle Beach Controllers */ XPAD_XBOX360_VENDOR(0x11c9), /* Nacon GC100XF */ + XPAD_XBOX360_VENDOR(0x11ff), /* PXN V900 */ XPAD_XBOX360_VENDOR(0x1209), /* Ardwiino Controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* Xbox 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane Xbox 360 controllers */ diff --git a/drivers/input/misc/cpcap-pwrbutton.c b/drivers/input/misc/cpcap-pwrbutton.c index 879790bbf9fe..85cddb84717a 100644 --- a/drivers/input/misc/cpcap-pwrbutton.c +++ b/drivers/input/misc/cpcap-pwrbutton.c @@ -1,16 +1,8 @@ -/** +// SPDX-License-Identifier: GPL-2.0-only +/* * CPCAP Power Button Input Driver * * Copyright (C) 2017 Sebastian Reichel <sre@kernel.org> - * - * This file is subject to the terms and conditions of the GNU General - * Public License. See the file "COPYING" in the main directory of this - * archive for more details. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/module.h> diff --git a/drivers/input/misc/powermate.c b/drivers/input/misc/powermate.c index c1c733a9cb89..db2ba89adaef 100644 --- a/drivers/input/misc/powermate.c +++ b/drivers/input/misc/powermate.c @@ -425,6 +425,7 @@ static void powermate_disconnect(struct usb_interface *intf) pm->requires_update = 0; usb_kill_urb(pm->irq); input_unregister_device(pm->input); + usb_kill_urb(pm->config); usb_free_urb(pm->irq); usb_free_urb(pm->config); powermate_free_buffers(interface_to_usbdev(intf), pm); diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 2118b2075f43..4e38229404b4 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -2114,6 +2114,7 @@ static int elantech_setup_ps2(struct psmouse *psmouse, psmouse->protocol_handler = elantech_process_byte; psmouse->disconnect = elantech_disconnect; psmouse->reconnect = elantech_reconnect; + psmouse->fast_reconnect = NULL; psmouse->pktsize = info->hw_version > 1 ? 6 : 4; return 0; diff --git a/drivers/input/mouse/psmouse-smbus.c b/drivers/input/mouse/psmouse-smbus.c index 7b13de979908..2a2459b1b4f2 100644 --- a/drivers/input/mouse/psmouse-smbus.c +++ b/drivers/input/mouse/psmouse-smbus.c @@ -5,7 +5,6 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/delay.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/libps2.h> @@ -119,18 +118,13 @@ static psmouse_ret_t psmouse_smbus_process_byte(struct psmouse *psmouse) return PSMOUSE_FULL_PACKET; } -static void psmouse_activate_smbus_mode(struct psmouse_smbus_dev *smbdev) -{ - if (smbdev->need_deactivate) { - psmouse_deactivate(smbdev->psmouse); - /* Give the device time to switch into SMBus mode */ - msleep(30); - } -} - static int psmouse_smbus_reconnect(struct psmouse *psmouse) { - psmouse_activate_smbus_mode(psmouse->private); + struct psmouse_smbus_dev *smbdev = psmouse->private; + + if (smbdev->need_deactivate) + psmouse_deactivate(psmouse); + return 0; } @@ -263,7 +257,8 @@ int psmouse_smbus_init(struct psmouse *psmouse, } } - psmouse_activate_smbus_mode(smbdev); + if (need_deactivate) + psmouse_deactivate(psmouse); psmouse->private = smbdev; psmouse->protocol_handler = psmouse_smbus_process_byte; diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index ada299ec5bba..22d16d80efb9 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -1623,6 +1623,7 @@ static int synaptics_init_ps2(struct psmouse *psmouse, psmouse->set_rate = synaptics_set_rate; psmouse->disconnect = synaptics_disconnect; psmouse->reconnect = synaptics_reconnect; + psmouse->fast_reconnect = NULL; psmouse->cleanup = synaptics_reset; /* Synaptics can usually stay in sync without extra help */ psmouse->resync_time = 0; @@ -1752,6 +1753,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse, psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && !SYN_CAP_EXT_BUTTONS_STICK(info->ext_cap_10); const struct rmi_device_platform_data pdata = { + .reset_delay_ms = 30, .sensor_pdata = { .sensor_type = rmi_sensor_touchpad, .axis_align.flip_y = true, diff --git a/drivers/input/rmi4/rmi_smbus.c b/drivers/input/rmi4/rmi_smbus.c index 7059a2762aeb..b0b099b5528a 100644 --- a/drivers/input/rmi4/rmi_smbus.c +++ b/drivers/input/rmi4/rmi_smbus.c @@ -235,12 +235,29 @@ static void rmi_smb_clear_state(struct rmi_smb_xport *rmi_smb) static int rmi_smb_enable_smbus_mode(struct rmi_smb_xport *rmi_smb) { - int retval; + struct i2c_client *client = rmi_smb->client; + int smbus_version; + + /* + * psmouse driver resets the controller, we only need to wait + * to give the firmware chance to fully reinitialize. + */ + if (rmi_smb->xport.pdata.reset_delay_ms) + msleep(rmi_smb->xport.pdata.reset_delay_ms); /* we need to get the smbus version to activate the touchpad */ - retval = rmi_smb_get_version(rmi_smb); - if (retval < 0) - return retval; + smbus_version = rmi_smb_get_version(rmi_smb); + if (smbus_version < 0) + return smbus_version; + + rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d", + smbus_version); + + if (smbus_version != 2 && smbus_version != 3) { + dev_err(&client->dev, "Unrecognized SMB version %d\n", + smbus_version); + return -ENODEV; + } return 0; } @@ -253,11 +270,10 @@ static int rmi_smb_reset(struct rmi_transport_dev *xport, u16 reset_addr) rmi_smb_clear_state(rmi_smb); /* - * we do not call the actual reset command, it has to be handled in - * PS/2 or there will be races between PS/2 and SMBus. - * PS/2 should ensure that a psmouse_reset is called before - * intializing the device and after it has been removed to be in a known - * state. + * We do not call the actual reset command, it has to be handled in + * PS/2 or there will be races between PS/2 and SMBus. PS/2 should + * ensure that a psmouse_reset is called before initializing the + * device and after it has been removed to be in a known state. */ return rmi_smb_enable_smbus_mode(rmi_smb); } @@ -272,7 +288,6 @@ static int rmi_smb_probe(struct i2c_client *client) { struct rmi_device_platform_data *pdata = dev_get_platdata(&client->dev); struct rmi_smb_xport *rmi_smb; - int smbus_version; int error; if (!pdata) { @@ -311,18 +326,9 @@ static int rmi_smb_probe(struct i2c_client *client) rmi_smb->xport.proto_name = "smb"; rmi_smb->xport.ops = &rmi_smb_ops; - smbus_version = rmi_smb_get_version(rmi_smb); - if (smbus_version < 0) - return smbus_version; - - rmi_dbg(RMI_DEBUG_XPORT, &client->dev, "Smbus version is %d", - smbus_version); - - if (smbus_version != 2 && smbus_version != 3) { - dev_err(&client->dev, "Unrecognized SMB version %d\n", - smbus_version); - return -ENODEV; - } + error = rmi_smb_enable_smbus_mode(rmi_smb); + if (error) + return error; i2c_set_clientdata(client, rmi_smb); diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 028e45bd050b..9c39553d30fa 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -619,6 +619,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX) }, { + /* Fujitsu Lifebook E5411 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU CLIENT COMPUTING LIMITED"), + DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E5411"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX) + }, + { /* Gigabyte M912 */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "GIGABYTE"), @@ -1281,6 +1289,13 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { .driver_data = (void *)(SERIO_QUIRK_NOMUX | SERIO_QUIRK_RESET_ALWAYS | SERIO_QUIRK_NOLOOP | SERIO_QUIRK_NOPNP) }, + /* See comment on TUXEDO InfinityBook S17 Gen6 / Clevo NS70MU above */ + { + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "PD5x_7xPNP_PNR_PNN_PNT"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOAUX) + }, { .matches = { DMI_MATCH(DMI_BOARD_NAME, "X170SM"), diff --git a/drivers/input/touchscreen/exc3000.c b/drivers/input/touchscreen/exc3000.c index 654845c0cdcd..a4030cc9ff60 100644 --- a/drivers/input/touchscreen/exc3000.c +++ b/drivers/input/touchscreen/exc3000.c @@ -7,6 +7,7 @@ * minimal implementation based on egalax_ts.c and egalax_i2c.c */ +#include <linux/acpi.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/device.h> @@ -454,11 +455,20 @@ static const struct of_device_id exc3000_of_match[] = { MODULE_DEVICE_TABLE(of, exc3000_of_match); #endif +#ifdef CONFIG_ACPI +static const struct acpi_device_id exc3000_acpi_match[] = { + { "EGA00001", .driver_data = (kernel_ulong_t)&exc3000_info[EETI_EXC80H60] }, + { } +}; +MODULE_DEVICE_TABLE(acpi, exc3000_acpi_match); +#endif + static struct i2c_driver exc3000_driver = { .driver = { .name = "exc3000", .dev_groups = exc3000_groups, .of_match_table = of_match_ptr(exc3000_of_match), + .acpi_match_table = ACPI_PTR(exc3000_acpi_match), }, .id_table = exc3000_id, .probe = exc3000_probe, diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 85d4249f1065..af32fbe57b63 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -900,6 +900,25 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) { + /* + * On newer devices there is only 1 GpioInt resource and _PS0 + * does the whole reset sequence for us. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); + + /* + * Before the _PS0 call the int GPIO may have been in output + * mode and the call should have put the int GPIO in input mode, + * but the GPIO subsys cached state may still think it is + * in output mode, causing gpiochip_lock_as_irq() failure. + * + * Add a mapping for the int GPIO to make the + * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, + * which will explicitly set the direction to input. + */ + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + gpio_mapping = acpi_goodix_int_first_gpios; } else { dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", ts->gpio_count, ts->gpio_int_idx); @@ -1499,6 +1518,7 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id); static const struct acpi_device_id goodix_acpi_match[] = { { "GDIX1001", 0 }, { "GDIX1002", 0 }, + { "GDX9110", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); |