diff options
Diffstat (limited to 'include/drm/drm_dp_helper.h')
| -rw-r--r-- | include/drm/drm_dp_helper.h | 55 |
1 files changed, 31 insertions, 24 deletions
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index edffd1dcca3e..1e85c2021f2f 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1016,6 +1016,11 @@ struct drm_device; #define DP_EDP_REGIONAL_BACKLIGHT_BASE 0x740 /* eDP 1.4 */ #define DP_EDP_REGIONAL_BACKLIGHT_0 0x741 /* eDP 1.4 */ +#define DP_EDP_MSO_LINK_CAPABILITIES 0x7a4 /* eDP 1.4 */ +# define DP_EDP_MSO_NUMBER_OF_LINKS_MASK (7 << 0) +# define DP_EDP_MSO_NUMBER_OF_LINKS_SHIFT 0 +# define DP_EDP_MSO_INDEPENDENT_LINK_BIT (1 << 3) + /* Sideband MSG Buffers */ #define DP_SIDEBAND_MSG_DOWN_REQ_BASE 0x1000 /* 1.2 MST */ #define DP_SIDEBAND_MSG_UP_REP_BASE 0x1200 /* 1.2 MST */ @@ -1171,6 +1176,7 @@ struct drm_device; # define DP_PCON_ENABLE_MAX_BW_48GBPS 6 # define DP_PCON_ENABLE_SOURCE_CTL_MODE (1 << 3) # define DP_PCON_ENABLE_CONCURRENT_LINK (1 << 4) +# define DP_PCON_ENABLE_SEQUENTIAL_LINK (0 << 4) # define DP_PCON_ENABLE_LINK_FRL_MODE (1 << 5) # define DP_PCON_ENABLE_HPD_READY (1 << 6) # define DP_PCON_ENABLE_HDMI_LINK (1 << 7) @@ -1185,6 +1191,7 @@ struct drm_device; # define DP_PCON_FRL_BW_MASK_40GBPS (1 << 4) # define DP_PCON_FRL_BW_MASK_48GBPS (1 << 5) # define DP_PCON_FRL_LINK_TRAIN_EXTENDED (1 << 6) +# define DP_PCON_FRL_LINK_TRAIN_NORMAL (0 << 6) /* PCON HDMI LINK STATUS */ #define DP_PCON_HDMI_TX_LINK_STATUS 0x303B @@ -1839,34 +1846,34 @@ struct drm_dp_aux_cec { * @crc_count: counter of captured frame CRCs * @transfer: transfers a message representing a single AUX transaction * - * The .dev field should be set to a pointer to the device that implements - * the AUX channel. + * The @dev field should be set to a pointer to the device that implements the + * AUX channel. * - * The .name field may be used to specify the name of the I2C adapter. If set to - * NULL, dev_name() of .dev will be used. + * The @name field may be used to specify the name of the I2C adapter. If set to + * %NULL, dev_name() of @dev will be used. * - * Drivers provide a hardware-specific implementation of how transactions - * are executed via the .transfer() function. A pointer to a drm_dp_aux_msg + * Drivers provide a hardware-specific implementation of how transactions are + * executed via the @transfer() function. A pointer to a &drm_dp_aux_msg * structure describing the transaction is passed into this function. Upon - * success, the implementation should return the number of payload bytes - * that were transferred, or a negative error-code on failure. Helpers - * propagate errors from the .transfer() function, with the exception of - * the -EBUSY error, which causes a transaction to be retried. On a short, - * helpers will return -EPROTO to make it simpler to check for failure. + * success, the implementation should return the number of payload bytes that + * were transferred, or a negative error-code on failure. Helpers propagate + * errors from the @transfer() function, with the exception of the %-EBUSY + * error, which causes a transaction to be retried. On a short, helpers will + * return %-EPROTO to make it simpler to check for failure. * * An AUX channel can also be used to transport I2C messages to a sink. A - * typical application of that is to access an EDID that's present in the - * sink device. The .transfer() function can also be used to execute such - * transactions. The drm_dp_aux_register() function registers an I2C - * adapter that can be passed to drm_probe_ddc(). Upon removal, drivers - * should call drm_dp_aux_unregister() to remove the I2C adapter. - * The I2C adapter uses long transfers by default; if a partial response is - * received, the adapter will drop down to the size given by the partial - * response for this transaction only. + * typical application of that is to access an EDID that's present in the sink + * device. The @transfer() function can also be used to execute such + * transactions. The drm_dp_aux_register() function registers an I2C adapter + * that can be passed to drm_probe_ddc(). Upon removal, drivers should call + * drm_dp_aux_unregister() to remove the I2C adapter. The I2C adapter uses long + * transfers by default; if a partial response is received, the adapter will + * drop down to the size given by the partial response for this transaction + * only. * - * Note that the aux helper code assumes that the .transfer() function - * only modifies the reply field of the drm_dp_aux_msg structure. The - * retry logic and i2c helpers assume this is the case. + * Note that the aux helper code assumes that the @transfer() function only + * modifies the reply field of the &drm_dp_aux_msg structure. The retry logic + * and i2c helpers assume this is the case. */ struct drm_dp_aux { const char *name; @@ -2149,9 +2156,9 @@ int drm_dp_get_pcon_max_frl_bw(const u8 dpcd[DP_RECEIVER_CAP_SIZE], int drm_dp_pcon_frl_prepare(struct drm_dp_aux *aux, bool enable_frl_ready_hpd); bool drm_dp_pcon_is_frl_ready(struct drm_dp_aux *aux); int drm_dp_pcon_frl_configure_1(struct drm_dp_aux *aux, int max_frl_gbps, - bool concurrent_mode); + u8 frl_mode); int drm_dp_pcon_frl_configure_2(struct drm_dp_aux *aux, int max_frl_mask, - bool extended_train_mode); + u8 frl_type); int drm_dp_pcon_reset_frl_config(struct drm_dp_aux *aux); int drm_dp_pcon_frl_enable(struct drm_dp_aux *aux); |