diff options
Diffstat (limited to 'include/drm/drm_modes.h')
| -rw-r--r-- | include/drm/drm_modes.h | 194 |
1 files changed, 93 insertions, 101 deletions
diff --git a/include/drm/drm_modes.h b/include/drm/drm_modes.h index 303ee5fbbdd8..eee3c9de6c4f 100644 --- a/include/drm/drm_modes.h +++ b/include/drm/drm_modes.h @@ -223,71 +223,21 @@ enum drm_mode_status { */ struct drm_display_mode { /** - * @head: - * - * struct list_head for mode lists. - */ - struct list_head head; - - /** - * @name: - * - * Human-readable name of the mode, filled out with drm_mode_set_name(). - */ - char name[DRM_DISPLAY_MODE_LEN]; - - /** - * @status: - * - * Status of the mode, used to filter out modes not supported by the - * hardware. See enum &drm_mode_status. - */ - enum drm_mode_status status; - - /** - * @type: - * - * A bitmask of flags, mostly about the source of a mode. Possible flags - * are: - * - * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native - * resolution of an LCD panel. There should only be one preferred - * mode per connector at any given time. - * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of - * them really. Drivers must set this bit for all modes they create - * and expose to userspace. - * - DRM_MODE_TYPE_USERDEF: Mode defined via kernel command line - * - * Plus a big list of flags which shouldn't be used at all, but are - * still around since these flags are also used in the userspace ABI. - * We no longer accept modes with these types though: - * - * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused. - * Use DRM_MODE_TYPE_DRIVER instead. - * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use - * DRM_MODE_TYPE_PREFERRED instead. - * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers - * which are stuck around for hysterical raisins only. No one has an - * idea what they were meant for. Don't use. - */ - unsigned int type; - - /** * @clock: * * Pixel clock in kHz. */ int clock; /* in kHz */ - int hdisplay; - int hsync_start; - int hsync_end; - int htotal; - int hskew; - int vdisplay; - int vsync_start; - int vsync_end; - int vtotal; - int vscan; + u16 hdisplay; + u16 hsync_start; + u16 hsync_end; + u16 htotal; + u16 hskew; + u16 vdisplay; + u16 vsync_start; + u16 vsync_end; + u16 vtotal; + u16 vscan; /** * @flags: * @@ -322,7 +272,37 @@ struct drm_display_mode { * - DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF: frame split into left and * right parts. */ - unsigned int flags; + u32 flags; + + /** + * @crtc_clock: + * + * Actual pixel or dot clock in the hardware. This differs from the + * logical @clock when e.g. using interlacing, double-clocking, stereo + * modes or other fancy stuff that changes the timings and signals + * actually sent over the wire. + * + * This is again in kHz. + * + * Note that with digital outputs like HDMI or DP there's usually a + * massive confusion between the dot clock and the signal clock at the + * bit encoding level. Especially when a 8b/10b encoding is used and the + * difference is exactly a factor of 10. + */ + int crtc_clock; + u16 crtc_hdisplay; + u16 crtc_hblank_start; + u16 crtc_hblank_end; + u16 crtc_hsync_start; + u16 crtc_hsync_end; + u16 crtc_htotal; + u16 crtc_hskew; + u16 crtc_vdisplay; + u16 crtc_vblank_start; + u16 crtc_vblank_end; + u16 crtc_vsync_start; + u16 crtc_vsync_end; + u16 crtc_vtotal; /** * @width_mm: @@ -330,7 +310,7 @@ struct drm_display_mode { * Addressable size of the output in mm, projectors should set this to * 0. */ - int width_mm; + u16 width_mm; /** * @height_mm: @@ -338,37 +318,36 @@ struct drm_display_mode { * Addressable size of the output in mm, projectors should set this to * 0. */ - int height_mm; + u16 height_mm; /** - * @crtc_clock: + * @type: * - * Actual pixel or dot clock in the hardware. This differs from the - * logical @clock when e.g. using interlacing, double-clocking, stereo - * modes or other fancy stuff that changes the timings and signals - * actually sent over the wire. + * A bitmask of flags, mostly about the source of a mode. Possible flags + * are: * - * This is again in kHz. + * - DRM_MODE_TYPE_PREFERRED: Preferred mode, usually the native + * resolution of an LCD panel. There should only be one preferred + * mode per connector at any given time. + * - DRM_MODE_TYPE_DRIVER: Mode created by the driver, which is all of + * them really. Drivers must set this bit for all modes they create + * and expose to userspace. + * - DRM_MODE_TYPE_USERDEF: Mode defined or selected via the kernel + * command line. * - * Note that with digital outputs like HDMI or DP there's usually a - * massive confusion between the dot clock and the signal clock at the - * bit encoding level. Especially when a 8b/10b encoding is used and the - * difference is exactly a factor of 10. + * Plus a big list of flags which shouldn't be used at all, but are + * still around since these flags are also used in the userspace ABI. + * We no longer accept modes with these types though: + * + * - DRM_MODE_TYPE_BUILTIN: Meant for hard-coded modes, unused. + * Use DRM_MODE_TYPE_DRIVER instead. + * - DRM_MODE_TYPE_DEFAULT: Again a leftover, use + * DRM_MODE_TYPE_PREFERRED instead. + * - DRM_MODE_TYPE_CLOCK_C and DRM_MODE_TYPE_CRTC_C: Define leftovers + * which are stuck around for hysterical raisins only. No one has an + * idea what they were meant for. Don't use. */ - int crtc_clock; - int crtc_hdisplay; - int crtc_hblank_start; - int crtc_hblank_end; - int crtc_hsync_start; - int crtc_hsync_end; - int crtc_htotal; - int crtc_hskew; - int crtc_vdisplay; - int crtc_vblank_start; - int crtc_vblank_end; - int crtc_vsync_start; - int crtc_vsync_end; - int crtc_vtotal; + u8 type; /** * @private_flags: @@ -381,21 +360,11 @@ struct drm_display_mode { int private_flags; /** - * @vrefresh: - * - * Vertical refresh rate, for debug output in human readable form. Not - * used in a functional way. - * - * This value is in Hz. - */ - int vrefresh; - - /** - * @picture_aspect_ratio: + * @head: * - * Field for setting the HDMI picture aspect ratio of a mode. + * struct list_head for mode lists. */ - enum hdmi_picture_aspect picture_aspect_ratio; + struct list_head head; /** * @export_head: @@ -409,6 +378,29 @@ struct drm_display_mode { * avoid overhead of protecting it by mode_config.mutex. */ struct list_head export_head; + + /** + * @name: + * + * Human-readable name of the mode, filled out with drm_mode_set_name(). + */ + char name[DRM_DISPLAY_MODE_LEN]; + + /** + * @status: + * + * Status of the mode, used to filter out modes not supported by the + * hardware. See enum &drm_mode_status. + */ + enum drm_mode_status status; + + /** + * @picture_aspect_ratio: + * + * Field for setting the HDMI picture aspect ratio of a mode. + */ + enum hdmi_picture_aspect picture_aspect_ratio; + }; /** @@ -421,7 +413,7 @@ struct drm_display_mode { * @m: display mode */ #define DRM_MODE_ARG(m) \ - (m)->name, (m)->vrefresh, (m)->clock, \ + (m)->name, drm_mode_vrefresh(m), (m)->clock, \ (m)->hdisplay, (m)->hsync_start, (m)->hsync_end, (m)->htotal, \ (m)->vdisplay, (m)->vsync_start, (m)->vsync_end, (m)->vtotal, \ (m)->type, (m)->flags |