summaryrefslogtreecommitdiff
path: root/include/linux/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd')
-rw-r--r--include/linux/mfd/asic3.h313
-rw-r--r--include/linux/mfd/htc-pasic3.h54
-rw-r--r--include/linux/mfd/t7l66xb.h29
-rw-r--r--include/linux/mfd/tc6387xb.h19
-rw-r--r--include/linux/mfd/tc6393xb.h53
-rw-r--r--include/linux/mfd/tmio.h5
6 files changed, 0 insertions, 473 deletions
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
deleted file mode 100644
index 61e686dbaa74..000000000000
--- a/include/linux/mfd/asic3.h
+++ /dev/null
@@ -1,313 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * include/linux/mfd/asic3.h
- *
- * Compaq ASIC3 headers.
- *
- * Copyright 2001 Compaq Computer Corporation.
- * Copyright 2007-2008 OpenedHand Ltd.
- */
-
-#ifndef __ASIC3_H__
-#define __ASIC3_H__
-
-#include <linux/types.h>
-
-struct led_classdev;
-struct asic3_led {
- const char *name;
- const char *default_trigger;
- struct led_classdev *cdev;
-};
-
-struct asic3_platform_data {
- u16 *gpio_config;
- unsigned int gpio_config_num;
-
- unsigned int irq_base;
-
- unsigned int gpio_base;
-
- unsigned int clock_rate;
-
- struct asic3_led *leds;
-};
-
-#define ASIC3_NUM_GPIO_BANKS 4
-#define ASIC3_GPIOS_PER_BANK 16
-#define ASIC3_NUM_GPIOS 64
-#define ASIC3_NR_IRQS ASIC3_NUM_GPIOS + 6
-
-#define ASIC3_IRQ_LED0 64
-#define ASIC3_IRQ_LED1 65
-#define ASIC3_IRQ_LED2 66
-#define ASIC3_IRQ_SPI 67
-#define ASIC3_IRQ_SMBUS 68
-#define ASIC3_IRQ_OWM 69
-
-#define ASIC3_TO_GPIO(gpio) (NR_BUILTIN_GPIO + (gpio))
-
-#define ASIC3_GPIO_BANK_A 0
-#define ASIC3_GPIO_BANK_B 1
-#define ASIC3_GPIO_BANK_C 2
-#define ASIC3_GPIO_BANK_D 3
-
-#define ASIC3_GPIO(bank, gpio) \
- ((ASIC3_GPIOS_PER_BANK * ASIC3_GPIO_BANK_##bank) + (gpio))
-#define ASIC3_GPIO_bit(gpio) (1 << (gpio & 0xf))
-/* All offsets below are specified with this address bus shift */
-#define ASIC3_DEFAULT_ADDR_SHIFT 2
-
-#define ASIC3_OFFSET(base, reg) (ASIC3_##base##_BASE + ASIC3_##base##_##reg)
-#define ASIC3_GPIO_OFFSET(base, reg) \
- (ASIC3_GPIO_##base##_BASE + ASIC3_GPIO_##reg)
-
-#define ASIC3_GPIO_A_BASE 0x0000
-#define ASIC3_GPIO_B_BASE 0x0100
-#define ASIC3_GPIO_C_BASE 0x0200
-#define ASIC3_GPIO_D_BASE 0x0300
-
-#define ASIC3_GPIO_TO_BANK(gpio) ((gpio) >> 4)
-#define ASIC3_GPIO_TO_BIT(gpio) ((gpio) - \
- (ASIC3_GPIOS_PER_BANK * ((gpio) >> 4)))
-#define ASIC3_GPIO_TO_MASK(gpio) (1 << ASIC3_GPIO_TO_BIT(gpio))
-#define ASIC3_GPIO_TO_BASE(gpio) (ASIC3_GPIO_A_BASE + (((gpio) >> 4) * 0x0100))
-#define ASIC3_BANK_TO_BASE(bank) (ASIC3_GPIO_A_BASE + ((bank) * 0x100))
-
-#define ASIC3_GPIO_MASK 0x00 /* R/W 0:don't mask */
-#define ASIC3_GPIO_DIRECTION 0x04 /* R/W 0:input */
-#define ASIC3_GPIO_OUT 0x08 /* R/W 0:output low */
-#define ASIC3_GPIO_TRIGGER_TYPE 0x0c /* R/W 0:level */
-#define ASIC3_GPIO_EDGE_TRIGGER 0x10 /* R/W 0:falling */
-#define ASIC3_GPIO_LEVEL_TRIGGER 0x14 /* R/W 0:low level detect */
-#define ASIC3_GPIO_SLEEP_MASK 0x18 /* R/W 0:don't mask in sleep mode */
-#define ASIC3_GPIO_SLEEP_OUT 0x1c /* R/W level 0:low in sleep mode */
-#define ASIC3_GPIO_BAT_FAULT_OUT 0x20 /* R/W level 0:low in batt_fault */
-#define ASIC3_GPIO_INT_STATUS 0x24 /* R/W 0:none, 1:detect */
-#define ASIC3_GPIO_ALT_FUNCTION 0x28 /* R/W 1:LED register control */
-#define ASIC3_GPIO_SLEEP_CONF 0x2c /*
- * R/W bit 1: autosleep
- * 0: disable gposlpout in normal mode,
- * enable gposlpout in sleep mode.
- */
-#define ASIC3_GPIO_STATUS 0x30 /* R Pin status */
-
-/*
- * ASIC3 GPIO config
- *
- * Bits 0..6 gpio number
- * Bits 7..13 Alternate function
- * Bit 14 Direction
- * Bit 15 Initial value
- *
- */
-#define ASIC3_CONFIG_GPIO_PIN(config) ((config) & 0x7f)
-#define ASIC3_CONFIG_GPIO_ALT(config) (((config) & (0x7f << 7)) >> 7)
-#define ASIC3_CONFIG_GPIO_DIR(config) ((config & (1 << 14)) >> 14)
-#define ASIC3_CONFIG_GPIO_INIT(config) ((config & (1 << 15)) >> 15)
-#define ASIC3_CONFIG_GPIO(gpio, alt, dir, init) (((gpio) & 0x7f) \
- | (((alt) & 0x7f) << 7) | (((dir) & 0x1) << 14) \
- | (((init) & 0x1) << 15))
-#define ASIC3_CONFIG_GPIO_DEFAULT(gpio, dir, init) \
- ASIC3_CONFIG_GPIO((gpio), 0, (dir), (init))
-#define ASIC3_CONFIG_GPIO_DEFAULT_OUT(gpio, init) \
- ASIC3_CONFIG_GPIO((gpio), 0, 1, (init))
-
-/*
- * Alternate functions
- */
-#define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0)
-#define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0)
-#define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0)
-#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 0, 0)
-#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 0, 0)
-#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 0, 0)
-#define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0)
-#define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0)
-#define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0)
-#define ASIC3_GPIOC5_SPI_CLK ASIC3_CONFIG_GPIO(37, 1, 1, 0)
-#define ASIC3_GPIOC5_nCIOW ASIC3_CONFIG_GPIO(37, 1, 1, 0)
-#define ASIC3_GPIOC6_nCIOR ASIC3_CONFIG_GPIO(38, 1, 1, 0)
-#define ASIC3_GPIOC7_nPCE_1 ASIC3_CONFIG_GPIO(39, 1, 0, 0)
-#define ASIC3_GPIOC8_nPCE_2 ASIC3_CONFIG_GPIO(40, 1, 0, 0)
-#define ASIC3_GPIOC9_nPOE ASIC3_CONFIG_GPIO(41, 1, 0, 0)
-#define ASIC3_GPIOC10_nPWE ASIC3_CONFIG_GPIO(42, 1, 0, 0)
-#define ASIC3_GPIOC11_PSKTSEL ASIC3_CONFIG_GPIO(43, 1, 0, 0)
-#define ASIC3_GPIOC12_nPREG ASIC3_CONFIG_GPIO(44, 1, 0, 0)
-#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0)
-#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0)
-#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0)
-#define ASIC3_GPIOD4_CF_nCD ASIC3_CONFIG_GPIO(52, 1, 0, 0)
-#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0)
-#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0)
-#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0)
-
-
-#define ASIC3_SPI_Base 0x0400
-#define ASIC3_SPI_Control 0x0000
-#define ASIC3_SPI_TxData 0x0004
-#define ASIC3_SPI_RxData 0x0008
-#define ASIC3_SPI_Int 0x000c
-#define ASIC3_SPI_Status 0x0010
-
-#define SPI_CONTROL_SPR(clk) ((clk) & 0x0f) /* Clock rate */
-
-#define ASIC3_PWM_0_Base 0x0500
-#define ASIC3_PWM_1_Base 0x0600
-#define ASIC3_PWM_TimeBase 0x0000
-#define ASIC3_PWM_PeriodTime 0x0004
-#define ASIC3_PWM_DutyTime 0x0008
-
-#define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */
-#define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */
-
-#define ASIC3_NUM_LEDS 3
-#define ASIC3_LED_0_Base 0x0700
-#define ASIC3_LED_1_Base 0x0800
-#define ASIC3_LED_2_Base 0x0900
-#define ASIC3_LED_TimeBase 0x0000 /* R/W 7 bits */
-#define ASIC3_LED_PeriodTime 0x0004 /* R/W 12 bits */
-#define ASIC3_LED_DutyTime 0x0008 /* R/W 12 bits */
-#define ASIC3_LED_AutoStopCount 0x000c /* R/W 16 bits */
-
-/* LED TimeBase bits - match ASIC2 */
-#define LED_TBS 0x0f /* Low 4 bits sets time base, max = 13 */
- /* Note: max = 5 on hx4700 */
- /* 0: maximum time base */
- /* 1: maximum time base / 2 */
- /* n: maximum time base / 2^n */
-
-#define LED_EN (1 << 4) /* LED ON/OFF 0:off, 1:on */
-#define LED_AUTOSTOP (1 << 5) /* LED ON/OFF auto stop 0:disable, 1:enable */
-#define LED_ALWAYS (1 << 6) /* LED Interrupt Mask 0:No mask, 1:mask */
-
-#define ASIC3_CLOCK_BASE 0x0A00
-#define ASIC3_CLOCK_CDEX 0x00
-#define ASIC3_CLOCK_SEL 0x04
-
-#define CLOCK_CDEX_SOURCE (1 << 0) /* 2 bits */
-#define CLOCK_CDEX_SOURCE0 (1 << 0)
-#define CLOCK_CDEX_SOURCE1 (1 << 1)
-#define CLOCK_CDEX_SPI (1 << 2)
-#define CLOCK_CDEX_OWM (1 << 3)
-#define CLOCK_CDEX_PWM0 (1 << 4)
-#define CLOCK_CDEX_PWM1 (1 << 5)
-#define CLOCK_CDEX_LED0 (1 << 6)
-#define CLOCK_CDEX_LED1 (1 << 7)
-#define CLOCK_CDEX_LED2 (1 << 8)
-
-/* Clocks settings: 1 for 24.576 MHz, 0 for 12.288Mhz */
-#define CLOCK_CDEX_SD_HOST (1 << 9) /* R/W: SD host clock source */
-#define CLOCK_CDEX_SD_BUS (1 << 10) /* R/W: SD bus clock source ctrl */
-#define CLOCK_CDEX_SMBUS (1 << 11)
-#define CLOCK_CDEX_CONTROL_CX (1 << 12)
-
-#define CLOCK_CDEX_EX0 (1 << 13) /* R/W: 32.768 kHz crystal */
-#define CLOCK_CDEX_EX1 (1 << 14) /* R/W: 24.576 MHz crystal */
-
-#define CLOCK_SEL_SD_HCLK_SEL (1 << 0) /* R/W: SDIO host clock select */
-#define CLOCK_SEL_SD_BCLK_SEL (1 << 1) /* R/W: SDIO bus clock select */
-
-/* R/W: INT clock source control (32.768 kHz) */
-#define CLOCK_SEL_CX (1 << 2)
-
-
-#define ASIC3_INTR_BASE 0x0B00
-
-#define ASIC3_INTR_INT_MASK 0x00 /* Interrupt mask control */
-#define ASIC3_INTR_P_INT_STAT 0x04 /* Peripheral interrupt status */
-#define ASIC3_INTR_INT_CPS 0x08 /* Interrupt timer clock pre-scale */
-#define ASIC3_INTR_INT_TBS 0x0c /* Interrupt timer set */
-
-#define ASIC3_INTMASK_GINTMASK (1 << 0) /* Global INTs mask 1:enable */
-#define ASIC3_INTMASK_GINTEL (1 << 1) /* 1: rising edge, 0: hi level */
-#define ASIC3_INTMASK_MASK0 (1 << 2)
-#define ASIC3_INTMASK_MASK1 (1 << 3)
-#define ASIC3_INTMASK_MASK2 (1 << 4)
-#define ASIC3_INTMASK_MASK3 (1 << 5)
-#define ASIC3_INTMASK_MASK4 (1 << 6)
-#define ASIC3_INTMASK_MASK5 (1 << 7)
-
-#define ASIC3_INTR_PERIPHERAL_A (1 << 0)
-#define ASIC3_INTR_PERIPHERAL_B (1 << 1)
-#define ASIC3_INTR_PERIPHERAL_C (1 << 2)
-#define ASIC3_INTR_PERIPHERAL_D (1 << 3)
-#define ASIC3_INTR_LED0 (1 << 4)
-#define ASIC3_INTR_LED1 (1 << 5)
-#define ASIC3_INTR_LED2 (1 << 6)
-#define ASIC3_INTR_SPI (1 << 7)
-#define ASIC3_INTR_SMBUS (1 << 8)
-#define ASIC3_INTR_OWM (1 << 9)
-
-#define ASIC3_INTR_CPS(x) ((x)&0x0f) /* 4 bits, max 14 */
-#define ASIC3_INTR_CPS_SET (1 << 4) /* Time base enable */
-
-
-/* Basic control of the SD ASIC */
-#define ASIC3_SDHWCTRL_BASE 0x0E00
-#define ASIC3_SDHWCTRL_SDCONF 0x00
-
-#define ASIC3_SDHWCTRL_SUSPEND (1 << 0) /* 1=suspend all SD operations */
-#define ASIC3_SDHWCTRL_CLKSEL (1 << 1) /* 1=SDICK, 0=HCLK */
-#define ASIC3_SDHWCTRL_PCLR (1 << 2) /* All registers of SDIO cleared */
-#define ASIC3_SDHWCTRL_LEVCD (1 << 3) /* SD card detection: 0:low */
-
-/* SD card write protection: 0=high */
-#define ASIC3_SDHWCTRL_LEVWP (1 << 4)
-#define ASIC3_SDHWCTRL_SDLED (1 << 5) /* SD card LED signal 0=disable */
-
-/* SD card power supply ctrl 1=enable */
-#define ASIC3_SDHWCTRL_SDPWR (1 << 6)
-
-#define ASIC3_EXTCF_BASE 0x1100
-
-#define ASIC3_EXTCF_SELECT 0x00
-#define ASIC3_EXTCF_RESET 0x04
-
-#define ASIC3_EXTCF_SMOD0 (1 << 0) /* slot number of mode 0 */
-#define ASIC3_EXTCF_SMOD1 (1 << 1) /* slot number of mode 1 */
-#define ASIC3_EXTCF_SMOD2 (1 << 2) /* slot number of mode 2 */
-#define ASIC3_EXTCF_OWM_EN (1 << 4) /* enable onewire module */
-#define ASIC3_EXTCF_OWM_SMB (1 << 5) /* OWM bus selection */
-#define ASIC3_EXTCF_OWM_RESET (1 << 6) /* ?? used by OWM and CF */
-#define ASIC3_EXTCF_CF0_SLEEP_MODE (1 << 7) /* CF0 sleep state */
-#define ASIC3_EXTCF_CF1_SLEEP_MODE (1 << 8) /* CF1 sleep state */
-#define ASIC3_EXTCF_CF0_PWAIT_EN (1 << 10) /* CF0 PWAIT_n control */
-#define ASIC3_EXTCF_CF1_PWAIT_EN (1 << 11) /* CF1 PWAIT_n control */
-#define ASIC3_EXTCF_CF0_BUF_EN (1 << 12) /* CF0 buffer control */
-#define ASIC3_EXTCF_CF1_BUF_EN (1 << 13) /* CF1 buffer control */
-#define ASIC3_EXTCF_SD_MEM_ENABLE (1 << 14)
-#define ASIC3_EXTCF_CF_SLEEP (1 << 15) /* CF sleep mode control */
-
-/*********************************************
- * The Onewire interface (DS1WM) is handled
- * by the ds1wm driver.
- *
- *********************************************/
-
-#define ASIC3_OWM_BASE 0xC00
-
-/*****************************************************************************
- * The SD configuration registers are at a completely different location
- * in memory. They are divided into three sets of registers:
- *
- * SD_CONFIG Core configuration register
- * SD_CTRL Control registers for SD operations
- * SDIO_CTRL Control registers for SDIO operations
- *
- *****************************************************************************/
-#define ASIC3_SD_CONFIG_BASE 0x0400 /* Assumes 32 bit addressing */
-#define ASIC3_SD_CONFIG_SIZE 0x0200 /* Assumes 32 bit addressing */
-#define ASIC3_SD_CTRL_BASE 0x1000
-#define ASIC3_SDIO_CTRL_BASE 0x1200
-
-#define ASIC3_MAP_SIZE_32BIT 0x2000
-#define ASIC3_MAP_SIZE_16BIT 0x1000
-
-/* Functions needed by leds-asic3 */
-
-struct asic3;
-extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val);
-extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg);
-
-#endif /* __ASIC3_H__ */
diff --git a/include/linux/mfd/htc-pasic3.h b/include/linux/mfd/htc-pasic3.h
deleted file mode 100644
index 3d3ed67bd969..000000000000
--- a/include/linux/mfd/htc-pasic3.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * HTC PASIC3 driver - LEDs and DS1WM
- *
- * Copyright (c) 2007 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- *
- */
-
-#ifndef __PASIC3_H
-#define __PASIC3_H
-
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-
-extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
-extern u8 pasic3_read_register(struct device *dev, u32 reg);
-
-/*
- * mask for registers 0x20,0x21,0x22
- */
-#define PASIC3_MASK_LED0 0x04
-#define PASIC3_MASK_LED1 0x08
-#define PASIC3_MASK_LED2 0x40
-
-/*
- * bits in register 0x06
- */
-#define PASIC3_BIT2_LED0 0x08
-#define PASIC3_BIT2_LED1 0x10
-#define PASIC3_BIT2_LED2 0x20
-
-struct pasic3_led {
- struct led_classdev led;
- unsigned int hw_num;
- unsigned int bit2;
- unsigned int mask;
- struct pasic3_leds_machinfo *pdata;
-};
-
-struct pasic3_leds_machinfo {
- unsigned int num_leds;
- unsigned int power_gpio;
- struct pasic3_led *leds;
-};
-
-struct pasic3_platform_data {
- struct pasic3_leds_machinfo *led_pdata;
- unsigned int clock_rate;
-};
-
-#endif
diff --git a/include/linux/mfd/t7l66xb.h b/include/linux/mfd/t7l66xb.h
deleted file mode 100644
index ae3e7a5c5219..000000000000
--- a/include/linux/mfd/t7l66xb.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * This file contains the definitions for the T7L66XB
- *
- * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
- */
-#ifndef MFD_T7L66XB_H
-#define MFD_T7L66XB_H
-
-#include <linux/mfd/core.h>
-#include <linux/mfd/tmio.h>
-
-struct t7l66xb_platform_data {
- int (*enable)(struct platform_device *dev);
- int (*suspend)(struct platform_device *dev);
- int (*resume)(struct platform_device *dev);
-
- int irq_base; /* The base for subdevice irqs */
-
- struct tmio_nand_data *nand_data;
-};
-
-
-#define IRQ_T7L66XB_MMC (1)
-#define IRQ_T7L66XB_NAND (3)
-
-#define T7L66XB_NR_IRQS 8
-
-#endif
diff --git a/include/linux/mfd/tc6387xb.h b/include/linux/mfd/tc6387xb.h
deleted file mode 100644
index aacf1dcc86b9..000000000000
--- a/include/linux/mfd/tc6387xb.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * This file contains the definitions for the TC6387XB
- *
- * (C) Copyright 2005 Ian Molton <spyro@f2s.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- */
-#ifndef MFD_TC6387XB_H
-#define MFD_TC6387XB_H
-
-struct tc6387xb_platform_data {
- int (*enable)(struct platform_device *dev);
- int (*suspend)(struct platform_device *dev);
- int (*resume)(struct platform_device *dev);
-};
-
-#endif
diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h
deleted file mode 100644
index d17807f2d0c9..000000000000
--- a/include/linux/mfd/tc6393xb.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Toshiba TC6393XB SoC support
- *
- * Copyright(c) 2005-2006 Chris Humbert
- * Copyright(c) 2005 Dirk Opfer
- * Copyright(c) 2005 Ian Molton <spyro@f2s.com>
- * Copyright(c) 2007 Dmitry Baryshkov
- *
- * Based on code written by Sharp/Lineo for 2.4 kernels
- * Based on locomo.c
- */
-
-#ifndef MFD_TC6393XB_H
-#define MFD_TC6393XB_H
-
-#include <linux/fb.h>
-
-/* Also one should provide the CK3P6MI clock */
-struct tc6393xb_platform_data {
- u16 scr_pll2cr; /* PLL2 Control */
- u16 scr_gper; /* GP Enable */
-
- int (*enable)(struct platform_device *dev);
- void (*disable)(struct platform_device *dev);
- int (*suspend)(struct platform_device *dev);
- int (*resume)(struct platform_device *dev);
-
- int irq_base; /* base for subdevice irqs */
-
- struct tmio_nand_data *nand_data;
- struct tmio_fb_data *fb_data;
-
- unsigned resume_restore : 1; /* make special actions
- to preserve the state
- on suspend/resume */
-};
-
-extern int tc6393xb_lcd_mode(struct platform_device *fb,
- const struct fb_videomode *mode);
-extern int tc6393xb_lcd_set_power(struct platform_device *fb, bool on);
-
-/*
- * Relative to irq_base
- */
-#define IRQ_TC6393_NAND 0
-#define IRQ_TC6393_MMC 1
-#define IRQ_TC6393_OHCI 2
-#define IRQ_TC6393_FB 4
-
-#define TC6393XB_NR_IRQS 8
-
-#endif
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index e8bf90281ba0..eace8ea6cda0 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -84,11 +84,6 @@
/* Some controllers have a CBSY bit */
#define TMIO_MMC_HAVE_CBSY BIT(11)
-int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
-int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
-void tmio_core_mmc_pwr(void __iomem *cnf, int shift, int state);
-void tmio_core_mmc_clk_div(void __iomem *cnf, int shift, int state);
-
struct dma_chan;
/*
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 12:53:27 +0300