diff options
Diffstat (limited to 'include/linux/phylink.h')
-rw-r--r-- | include/linux/phylink.h | 86 |
1 files changed, 35 insertions, 51 deletions
diff --git a/include/linux/phylink.h b/include/linux/phylink.h index 1817940a3418..789c516c6b4a 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -9,6 +9,7 @@ struct device_node; struct ethtool_cmd; struct fwnode_handle; struct net_device; +struct phylink; enum { MLO_PAUSE_NONE, @@ -200,8 +201,6 @@ enum phylink_op_type { * struct phylink_config - PHYLINK configuration structure * @dev: a pointer to a struct device associated with the MAC * @type: operation type of PHYLINK instance - * @legacy_pre_march2020: driver has not been updated for March 2020 updates - * (See commit 7cceb599d15d ("net: phylink: avoid mac_config calls") * @poll_fixed_state: if true, starts link_poll, * if MAC link is at %MLO_AN_FIXED mode. * @mac_managed_pm: if true, indicate the MAC driver is responsible for PHY PM. @@ -215,7 +214,6 @@ enum phylink_op_type { struct phylink_config { struct device *dev; enum phylink_op_type type; - bool legacy_pre_march2020; bool poll_fixed_state; bool mac_managed_pm; bool ovr_an_inband; @@ -229,11 +227,9 @@ struct phylink_config { * struct phylink_mac_ops - MAC operations structure. * @validate: Validate and update the link configuration. * @mac_select_pcs: Select a PCS for the interface mode. - * @mac_pcs_get_state: Read the current link state from the hardware. * @mac_prepare: prepare for a major reconfiguration of the interface. * @mac_config: configure the MAC for the selected mode and state. * @mac_finish: finish a major reconfiguration of the interface. - * @mac_an_restart: restart 802.3z BaseX autonegotiation. * @mac_link_down: take the link down. * @mac_link_up: allow the link to come up. * @@ -245,15 +241,12 @@ struct phylink_mac_ops { struct phylink_link_state *state); struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config, phy_interface_t interface); - void (*mac_pcs_get_state)(struct phylink_config *config, - struct phylink_link_state *state); int (*mac_prepare)(struct phylink_config *config, unsigned int mode, phy_interface_t iface); void (*mac_config)(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state); int (*mac_finish)(struct phylink_config *config, unsigned int mode, phy_interface_t iface); - void (*mac_an_restart)(struct phylink_config *config); void (*mac_link_down)(struct phylink_config *config, unsigned int mode, phy_interface_t interface); void (*mac_link_up)(struct phylink_config *config, @@ -314,25 +307,6 @@ struct phylink_pcs *mac_select_pcs(struct phylink_config *config, phy_interface_t interface); /** - * mac_pcs_get_state() - Read the current inband link state from the hardware - * @config: a pointer to a &struct phylink_config. - * @state: a pointer to a &struct phylink_link_state. - * - * Read the current inband link state from the MAC PCS, reporting the - * current speed in @state->speed, duplex mode in @state->duplex, pause - * mode in @state->pause using the %MLO_PAUSE_RX and %MLO_PAUSE_TX bits, - * negotiation completion state in @state->an_complete, and link up state - * in @state->link. If possible, @state->lp_advertising should also be - * populated. - * - * Note: This is a legacy method. This function will not be called unless - * legacy_pre_march2020 is set in &struct phylink_config and there is no - * PCS attached. - */ -void mac_pcs_get_state(struct phylink_config *config, - struct phylink_link_state *state); - -/** * mac_prepare() - prepare to change the PHY interface mode * @config: a pointer to a &struct phylink_config. * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. @@ -368,17 +342,9 @@ int mac_prepare(struct phylink_config *config, unsigned int mode, * guaranteed to be correct, and so any mac_config() implementation must * never reference these fields. * - * Note: For legacy March 2020 drivers (drivers with legacy_pre_march2020 set - * in their &phylnk_config and which don't have a PCS), this function will be - * called on each link up event, and to also change the in-band advert. For - * non-legacy drivers, it will only be called to reconfigure the MAC for a - * "major" change in e.g. interface mode. It will not be called for changes - * in speed, duplex or pause modes or to change the in-band advertisement. - * In any case, it is strongly preferred that speed, duplex and pause settings - * are handled in the mac_link_up() method and not in this method. - * - * (this requires a rewrite - please refer to mac_link_up() for situations - * where the PCS and MAC are not tightly integrated.) + * This will only be called to reconfigure the MAC for a "major" change in + * e.g. interface mode. It will not be called for changes in speed, duplex + * or pause modes or to change the in-band advertisement. * * In all negotiation modes, as defined by @mode, @state->pause indicates the * pause settings which should be applied as follows. If %MLO_PAUSE_AN is not @@ -410,7 +376,7 @@ int mac_prepare(struct phylink_config *config, unsigned int mode, * 1000base-X or Cisco SGMII mode depending on the @state->interface * mode). In both cases, link state management (whether the link * is up or not) is performed by the MAC, and reported via the - * mac_pcs_get_state() callback. Changes in link state must be made + * pcs_get_state() callback. Changes in link state must be made * by calling phylink_mac_change(). * * Interface mode specific details are mentioned below. @@ -459,16 +425,6 @@ int mac_finish(struct phylink_config *config, unsigned int mode, phy_interface_t iface); /** - * mac_an_restart() - restart 802.3z BaseX autonegotiation - * @config: a pointer to a &struct phylink_config. - * - * Note: This is a legacy method. This function will not be called unless - * legacy_pre_march2020 is set in &struct phylink_config and there is no - * PCS attached. - */ -void mac_an_restart(struct phylink_config *config); - -/** * mac_link_down() - take the link down * @config: a pointer to a &struct phylink_config. * @mode: link autonegotiation mode @@ -520,14 +476,19 @@ struct phylink_pcs_ops; /** * struct phylink_pcs - PHYLINK PCS instance * @ops: a pointer to the &struct phylink_pcs_ops structure + * @phylink: pointer to &struct phylink_config * @neg_mode: provide PCS neg mode via "mode" argument * @poll: poll the PCS for link changes * * This structure is designed to be embedded within the PCS private data, * and will be passed between phylink and the PCS. + * + * The @phylink member is private to phylink and must not be touched by + * the PCS driver. */ struct phylink_pcs { const struct phylink_pcs_ops *ops; + struct phylink *phylink; bool neg_mode; bool poll; }; @@ -535,6 +496,10 @@ struct phylink_pcs { /** * struct phylink_pcs_ops - MAC PCS operations structure. * @pcs_validate: validate the link configuration. + * @pcs_enable: enable the PCS. + * @pcs_disable: disable the PCS. + * @pcs_pre_config: pre-mac_config method (for errata) + * @pcs_post_config: post-mac_config method (for arrata) * @pcs_get_state: read the current MAC PCS link state from the hardware. * @pcs_config: configure the MAC PCS for the selected mode and state. * @pcs_an_restart: restart 802.3z BaseX autonegotiation. @@ -544,6 +509,12 @@ struct phylink_pcs { struct phylink_pcs_ops { int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported, const struct phylink_link_state *state); + int (*pcs_enable)(struct phylink_pcs *pcs); + void (*pcs_disable)(struct phylink_pcs *pcs); + void (*pcs_pre_config)(struct phylink_pcs *pcs, + phy_interface_t interface); + int (*pcs_post_config)(struct phylink_pcs *pcs, + phy_interface_t interface); void (*pcs_get_state)(struct phylink_pcs *pcs, struct phylink_link_state *state); int (*pcs_config)(struct phylink_pcs *pcs, unsigned int neg_mode, @@ -574,6 +545,18 @@ int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported, const struct phylink_link_state *state); /** + * pcs_enable() - enable the PCS. + * @pcs: a pointer to a &struct phylink_pcs. + */ +int pcs_enable(struct phylink_pcs *pcs); + +/** + * pcs_disable() - disable the PCS. + * @pcs: a pointer to a &struct phylink_pcs. + */ +void pcs_disable(struct phylink_pcs *pcs); + +/** * pcs_get_state() - Read the current inband link state from the hardware * @pcs: a pointer to a &struct phylink_pcs. * @state: a pointer to a &struct phylink_link_state. @@ -585,8 +568,8 @@ int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported, * in @state->link. If possible, @state->lp_advertising should also be * populated. * - * When present, this overrides mac_pcs_get_state() in &struct - * phylink_mac_ops. + * When present, this overrides pcs_get_state() in &struct + * phylink_pcs_ops. */ void pcs_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state); @@ -677,6 +660,7 @@ int phylink_fwnode_phy_connect(struct phylink *pl, void phylink_disconnect_phy(struct phylink *); void phylink_mac_change(struct phylink *, bool up); +void phylink_pcs_change(struct phylink_pcs *, bool up); void phylink_start(struct phylink *); void phylink_stop(struct phylink *); |