diff options
Diffstat (limited to 'include/linux/pse-pd')
-rw-r--r-- | include/linux/pse-pd/pse.h | 83 |
1 files changed, 73 insertions, 10 deletions
diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h index fb724c65c77b..6d07c95dabb9 100644 --- a/include/linux/pse-pd/pse.h +++ b/include/linux/pse-pd/pse.h @@ -15,11 +15,14 @@ struct pse_controller_dev; /** * struct pse_control_config - PSE control/channel configuration. * - * @admin_cotrol: set PoDL PSE admin control as described in + * @podl_admin_control: set PoDL PSE admin control as described in * IEEE 802.3-2018 30.15.1.2.1 acPoDLPSEAdminControl + * @c33_admin_control: set PSE admin control as described in + * IEEE 802.3-2022 30.9.1.2.1 acPSEAdminControl */ struct pse_control_config { - enum ethtool_podl_pse_admin_state admin_cotrol; + enum ethtool_podl_pse_admin_state podl_admin_control; + enum ethtool_c33_pse_admin_state c33_admin_control; }; /** @@ -29,25 +32,36 @@ struct pse_control_config { * functions. IEEE 802.3-2018 30.15.1.1.2 aPoDLPSEAdminState * @podl_pw_status: power detection status of the PoDL PSE. * IEEE 802.3-2018 30.15.1.1.3 aPoDLPSEPowerDetectionStatus: + * @c33_admin_state: operational state of the PSE + * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState + * @c33_pw_status: power detection status of the PSE. + * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: */ struct pse_control_status { enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_podl_pse_pw_d_status podl_pw_status; + enum ethtool_c33_pse_admin_state c33_admin_state; + enum ethtool_c33_pse_pw_d_status c33_pw_status; }; /** * struct pse_controller_ops - PSE controller driver callbacks * * @ethtool_get_status: get PSE control status for ethtool interface - * @ethtool_set_config: set PSE control configuration over ethtool interface + * @setup_pi_matrix: setup PI matrix of the PSE controller + * @pi_is_enabled: Return 1 if the PSE PI is enabled, 0 if not. + * May also return negative errno. + * @pi_enable: Configure the PSE PI as enabled. + * @pi_disable: Configure the PSE PI as disabled. */ struct pse_controller_ops { int (*ethtool_get_status)(struct pse_controller_dev *pcdev, unsigned long id, struct netlink_ext_ack *extack, struct pse_control_status *status); - int (*ethtool_set_config)(struct pse_controller_dev *pcdev, - unsigned long id, struct netlink_ext_ack *extack, - const struct pse_control_config *config); + int (*setup_pi_matrix)(struct pse_controller_dev *pcdev); + int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id); + int (*pi_enable)(struct pse_controller_dev *pcdev, int id); + int (*pi_disable)(struct pse_controller_dev *pcdev, int id); }; struct module; @@ -55,6 +69,40 @@ struct device_node; struct of_phandle_args; struct pse_control; +/* PSE PI pairset pinout can either be Alternative A or Alternative B */ +enum pse_pi_pairset_pinout { + ALTERNATIVE_A, + ALTERNATIVE_B, +}; + +/** + * struct pse_pi_pairset - PSE PI pairset entity describing the pinout + * alternative ant its phandle + * + * @pinout: description of the pinout alternative + * @np: device node pointer describing the pairset phandle + */ +struct pse_pi_pairset { + enum pse_pi_pairset_pinout pinout; + struct device_node *np; +}; + +/** + * struct pse_pi - PSE PI (Power Interface) entity as described in + * IEEE 802.3-2022 145.2.4 + * + * @pairset: table of the PSE PI pinout alternative for the two pairset + * @np: device node pointer of the PSE PI node + * @rdev: regulator represented by the PSE PI + * @admin_state_enabled: PI enabled state + */ +struct pse_pi { + struct pse_pi_pairset pairset[2]; + struct device_node *np; + struct regulator_dev *rdev; + bool admin_state_enabled; +}; + /** * struct pse_controller_dev - PSE controller entity that might * provide multiple PSE controls @@ -64,10 +112,11 @@ struct pse_control; * @pse_control_head: head of internal list of requested PSE controls * @dev: corresponding driver model device struct * @of_pse_n_cells: number of cells in PSE line specifiers - * @of_xlate: translation function to translate from specifier as found in the - * device tree to id as given to the PSE control ops * @nr_lines: number of PSE controls in this controller device * @lock: Mutex for serialization access to the PSE controller + * @types: types of the PSE controller + * @pi: table of PSE PIs described in this controller device + * @no_of_pse_pi: flag set if the pse_pis devicetree node is not used */ struct pse_controller_dev { const struct pse_controller_ops *ops; @@ -76,10 +125,11 @@ struct pse_controller_dev { struct list_head pse_control_head; struct device *dev; int of_pse_n_cells; - int (*of_xlate)(struct pse_controller_dev *pcdev, - const struct of_phandle_args *pse_spec); unsigned int nr_lines; struct mutex lock; + enum ethtool_pse_types types; + struct pse_pi *pi; + bool no_of_pse_pi; }; #if IS_ENABLED(CONFIG_PSE_CONTROLLER) @@ -99,6 +149,9 @@ int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config); +bool pse_has_podl(struct pse_control *psec); +bool pse_has_c33(struct pse_control *psec); + #else static inline struct pse_control *of_pse_control_get(struct device_node *node) @@ -124,6 +177,16 @@ static inline int pse_ethtool_set_config(struct pse_control *psec, return -ENOTSUPP; } +static inline bool pse_has_podl(struct pse_control *psec) +{ + return false; +} + +static inline bool pse_has_c33(struct pse_control *psec) +{ + return false; +} + #endif #endif |