diff options
Diffstat (limited to 'include/linux/pwm.h')
-rw-r--r-- | include/linux/pwm.h | 84 |
1 files changed, 18 insertions, 66 deletions
diff --git a/include/linux/pwm.h b/include/linux/pwm.h index 56518adc31dd..eaa5c6e3fc9f 100644 --- a/include/linux/pwm.h +++ b/include/linux/pwm.h @@ -242,11 +242,7 @@ pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle, * struct pwm_ops - PWM controller operations * @request: optional hook for requesting a PWM * @free: optional hook for freeing a PWM - * @config: configure duty cycles and period length for this PWM - * @set_polarity: configure the polarity of this PWM * @capture: capture and report PWM signal - * @enable: enable PWM output toggling - * @disable: disable PWM output toggling * @apply: atomically apply a new PWM config. The state argument * should be adjusted with the real hardware config (if the * approximate the period or duty_cycle value, state should @@ -254,53 +250,56 @@ pwm_set_relative_duty_cycle(struct pwm_state *state, unsigned int duty_cycle, * @get_state: get the current PWM state. This function is only * called once per PWM device when the PWM chip is * registered. - * @dbg_show: optional routine to show contents in debugfs * @owner: helps prevent removal of modules exporting active PWMs + * @config: configure duty cycles and period length for this PWM + * @set_polarity: configure the polarity of this PWM + * @enable: enable PWM output toggling + * @disable: disable PWM output toggling */ struct pwm_ops { int (*request)(struct pwm_chip *chip, struct pwm_device *pwm); void (*free)(struct pwm_chip *chip, struct pwm_device *pwm); - int (*config)(struct pwm_chip *chip, struct pwm_device *pwm, - int duty_ns, int period_ns); - int (*set_polarity)(struct pwm_chip *chip, struct pwm_device *pwm, - enum pwm_polarity polarity); int (*capture)(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_capture *result, unsigned long timeout); - int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm); - void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm); int (*apply)(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state); void (*get_state)(struct pwm_chip *chip, struct pwm_device *pwm, struct pwm_state *state); -#ifdef CONFIG_DEBUG_FS - void (*dbg_show)(struct pwm_chip *chip, struct seq_file *s); -#endif struct module *owner; + + /* Only used by legacy drivers */ + int (*config)(struct pwm_chip *chip, struct pwm_device *pwm, + int duty_ns, int period_ns); + int (*set_polarity)(struct pwm_chip *chip, struct pwm_device *pwm, + enum pwm_polarity polarity); + int (*enable)(struct pwm_chip *chip, struct pwm_device *pwm); + void (*disable)(struct pwm_chip *chip, struct pwm_device *pwm); }; /** * struct pwm_chip - abstract a PWM controller * @dev: device providing the PWMs - * @list: list node for internal use * @ops: callbacks for this PWM controller * @base: number of first PWM controlled by this chip * @npwm: number of PWMs controlled by this chip - * @pwms: array of PWM devices allocated by the framework * @of_xlate: request a PWM device given a device tree PWM specifier * @of_pwm_n_cells: number of cells expected in the device tree PWM specifier + * @list: list node for internal use + * @pwms: array of PWM devices allocated by the framework */ struct pwm_chip { struct device *dev; - struct list_head list; const struct pwm_ops *ops; int base; unsigned int npwm; - struct pwm_device *pwms; - struct pwm_device * (*of_xlate)(struct pwm_chip *pc, const struct of_phandle_args *args); unsigned int of_pwm_n_cells; + + /* only used internally by the PWM framework */ + struct list_head list; + struct pwm_device *pwms; }; /** @@ -349,42 +348,6 @@ static inline int pwm_config(struct pwm_device *pwm, int duty_ns, } /** - * pwm_set_polarity() - configure the polarity of a PWM signal - * @pwm: PWM device - * @polarity: new polarity of the PWM signal - * - * Note that the polarity cannot be configured while the PWM device is - * enabled. - * - * Returns: 0 on success or a negative error code on failure. - */ -static inline int pwm_set_polarity(struct pwm_device *pwm, - enum pwm_polarity polarity) -{ - struct pwm_state state; - - if (!pwm) - return -EINVAL; - - pwm_get_state(pwm, &state); - if (state.polarity == polarity) - return 0; - - /* - * Changing the polarity of a running PWM without adjusting the - * dutycycle/period value is a bit risky (can introduce glitches). - * Return -EBUSY in this case. - * Note that this is allowed when using pwm_apply_state() because - * the user specifies all the parameters. - */ - if (state.enabled) - return -EBUSY; - - state.polarity = polarity; - return pwm_apply_state(pwm, &state); -} - -/** * pwm_enable() - start a PWM output toggling * @pwm: PWM device * @@ -483,12 +446,6 @@ static inline int pwm_capture(struct pwm_device *pwm, return -EINVAL; } -static inline int pwm_set_polarity(struct pwm_device *pwm, - enum pwm_polarity polarity) -{ - return -ENOTSUPP; -} - static inline int pwm_enable(struct pwm_device *pwm) { return -EINVAL; @@ -639,7 +596,6 @@ static inline void pwm_remove_table(struct pwm_lookup *table, size_t num) #ifdef CONFIG_PWM_SYSFS void pwmchip_sysfs_export(struct pwm_chip *chip); void pwmchip_sysfs_unexport(struct pwm_chip *chip); -void pwmchip_sysfs_unexport_children(struct pwm_chip *chip); #else static inline void pwmchip_sysfs_export(struct pwm_chip *chip) { @@ -648,10 +604,6 @@ static inline void pwmchip_sysfs_export(struct pwm_chip *chip) static inline void pwmchip_sysfs_unexport(struct pwm_chip *chip) { } - -static inline void pwmchip_sysfs_unexport_children(struct pwm_chip *chip) -{ -} #endif /* CONFIG_PWM_SYSFS */ #endif /* __LINUX_PWM_H */ |