diff options
Diffstat (limited to 'include/linux/qed/qed_if.h')
-rw-r--r-- | include/linux/qed/qed_if.h | 283 |
1 files changed, 163 insertions, 120 deletions
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h index 68d17a4fbf20..0dae7fcc5ef2 100644 --- a/include/linux/qed/qed_if.h +++ b/include/linux/qed/qed_if.h @@ -24,6 +24,9 @@ #include <linux/io-64-nonatomic-lo-hi.h> #include <net/devlink.h> +#define QED_TX_SWS_TIMER_DFLT 500 +#define QED_TWO_MSL_TIMER_DFLT 4000 + enum dcbx_protocol_type { DCBX_PROTOCOL_ISCSI, DCBX_PROTOCOL_FCOE, @@ -542,6 +545,22 @@ struct qed_iscsi_pf_params { u8 bdq_pbl_num_entries[3]; }; +struct qed_nvmetcp_pf_params { + u64 glbl_q_params_addr; + u16 cq_num_entries; + u16 num_cons; + u16 num_tasks; + u8 num_sq_pages_in_ring; + u8 num_r2tq_pages_in_ring; + u8 num_uhq_pages_in_ring; + u8 num_queues; + u8 gl_rq_pi; + u8 gl_cmd_pi; + u8 debug_mode; + u8 ll2_ooo_queue_id; + u16 min_rto; +}; + struct qed_rdma_pf_params { /* Supplied to QED during resource allocation (may affect the ILT and * the doorbell BAR). @@ -560,6 +579,7 @@ struct qed_pf_params { struct qed_eth_pf_params eth_pf_params; struct qed_fcoe_pf_params fcoe_pf_params; struct qed_iscsi_pf_params iscsi_pf_params; + struct qed_nvmetcp_pf_params nvmetcp_pf_params; struct qed_rdma_pf_params rdma_pf_params; }; @@ -571,7 +591,7 @@ enum qed_int_mode { }; struct qed_sb_info { - struct status_block_e4 *sb_virt; + struct status_block *sb_virt; dma_addr_t sb_phys; u32 sb_ack; /* Last given ack */ u16 igu_sb_id; @@ -596,7 +616,6 @@ enum qed_hw_err_type { enum qed_dev_type { QED_DEV_TYPE_BB, QED_DEV_TYPE_AH, - QED_DEV_TYPE_E5, }; struct qed_dev_info { @@ -662,6 +681,7 @@ enum qed_sb_type { enum qed_protocol { QED_PROTOCOL_ETH, QED_PROTOCOL_ISCSI, + QED_PROTOCOL_NVMETCP = QED_PROTOCOL_ISCSI, QED_PROTOCOL_FCOE, }; @@ -801,47 +821,47 @@ struct qed_common_cb_ops { struct qed_selftest_ops { /** - * @brief selftest_interrupt - Perform interrupt test + * selftest_interrupt(): Perform interrupt test. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*selftest_interrupt)(struct qed_dev *cdev); /** - * @brief selftest_memory - Perform memory test + * selftest_memory(): Perform memory test. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*selftest_memory)(struct qed_dev *cdev); /** - * @brief selftest_register - Perform register test + * selftest_register(): Perform register test. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*selftest_register)(struct qed_dev *cdev); /** - * @brief selftest_clock - Perform clock test + * selftest_clock(): Perform clock test. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*selftest_clock)(struct qed_dev *cdev); /** - * @brief selftest_nvram - Perform nvram test + * selftest_nvram(): Perform nvram test. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*selftest_nvram) (struct qed_dev *cdev); }; @@ -909,47 +929,53 @@ struct qed_common_ops { enum qed_hw_err_type err_type); /** - * @brief can_link_change - can the instance change the link or not + * can_link_change(): can the instance change the link or not. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return true if link-change is allowed, false otherwise. + * Return: true if link-change is allowed, false otherwise. */ bool (*can_link_change)(struct qed_dev *cdev); /** - * @brief set_link - set links according to params + * set_link(): set links according to params. * - * @param cdev - * @param params - values used to override the default link configuration + * @cdev: Qed dev pointer. + * @params: values used to override the default link configuration. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*set_link)(struct qed_dev *cdev, struct qed_link_params *params); /** - * @brief get_link - returns the current link state. + * get_link(): returns the current link state. + * + * @cdev: Qed dev pointer. + * @if_link: structure to be filled with current link configuration. * - * @param cdev - * @param if_link - structure to be filled with current link configuration. + * Return: Void. */ void (*get_link)(struct qed_dev *cdev, struct qed_link_output *if_link); /** - * @brief - drains chip in case Tx completions fail to arrive due to pause. + * drain(): drains chip in case Tx completions fail to arrive due to pause. * - * @param cdev + * @cdev: Qed dev pointer. + * + * Return: Int. */ int (*drain)(struct qed_dev *cdev); /** - * @brief update_msglvl - update module debug level + * update_msglvl(): update module debug level. + * + * @cdev: Qed dev pointer. + * @dp_module: Debug module. + * @dp_level: Debug level. * - * @param cdev - * @param dp_module - * @param dp_level + * Return: Void. */ void (*update_msglvl)(struct qed_dev *cdev, u32 dp_module, @@ -963,70 +989,73 @@ struct qed_common_ops { struct qed_chain *p_chain); /** - * @brief nvm_flash - Flash nvm data. + * nvm_flash(): Flash nvm data. * - * @param cdev - * @param name - file containing the data + * @cdev: Qed dev pointer. + * @name: file containing the data. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*nvm_flash)(struct qed_dev *cdev, const char *name); /** - * @brief nvm_get_image - reads an entire image from nvram + * nvm_get_image(): reads an entire image from nvram. * - * @param cdev - * @param type - type of the request nvram image - * @param buf - preallocated buffer to fill with the image - * @param len - length of the allocated buffer + * @cdev: Qed dev pointer. + * @type: type of the request nvram image. + * @buf: preallocated buffer to fill with the image. + * @len: length of the allocated buffer. * - * @return 0 on success, error otherwise + * Return: 0 on success, error otherwise. */ int (*nvm_get_image)(struct qed_dev *cdev, enum qed_nvm_images type, u8 *buf, u16 len); /** - * @brief set_coalesce - Configure Rx coalesce value in usec + * set_coalesce(): Configure Rx coalesce value in usec. * - * @param cdev - * @param rx_coal - Rx coalesce value in usec - * @param tx_coal - Tx coalesce value in usec - * @param qid - Queue index - * @param sb_id - Status Block Id + * @cdev: Qed dev pointer. + * @rx_coal: Rx coalesce value in usec. + * @tx_coal: Tx coalesce value in usec. + * @handle: Handle. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*set_coalesce)(struct qed_dev *cdev, u16 rx_coal, u16 tx_coal, void *handle); /** - * @brief set_led - Configure LED mode + * set_led() - Configure LED mode. * - * @param cdev - * @param mode - LED mode + * @cdev: Qed dev pointer. + * @mode: LED mode. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*set_led)(struct qed_dev *cdev, enum qed_led_mode mode); /** - * @brief attn_clr_enable - Prevent attentions from being reasserted + * attn_clr_enable(): Prevent attentions from being reasserted. * - * @param cdev - * @param clr_enable + * @cdev: Qed dev pointer. + * @clr_enable: Clear enable. + * + * Return: Void. */ void (*attn_clr_enable)(struct qed_dev *cdev, bool clr_enable); /** - * @brief db_recovery_add - add doorbell information to the doorbell - * recovery mechanism. + * db_recovery_add(): add doorbell information to the doorbell + * recovery mechanism. + * + * @cdev: Qed dev pointer. + * @db_addr: Doorbell address. + * @db_data: Dddress of where db_data is stored. + * @db_width: Doorbell is 32b or 64b. + * @db_space: Doorbell recovery addresses are user or kernel space. * - * @param cdev - * @param db_addr - doorbell address - * @param db_data - address of where db_data is stored - * @param db_is_32b - doorbell is 32b pr 64b - * @param db_is_user - doorbell recovery addresses are user or kernel space + * Return: Int. */ int (*db_recovery_add)(struct qed_dev *cdev, void __iomem *db_addr, @@ -1035,114 +1064,130 @@ struct qed_common_ops { enum qed_db_rec_space db_space); /** - * @brief db_recovery_del - remove doorbell information from the doorbell + * db_recovery_del(): remove doorbell information from the doorbell * recovery mechanism. db_data serves as key (db_addr is not unique). * - * @param cdev - * @param db_addr - doorbell address - * @param db_data - address where db_data is stored. Serves as key for the - * entry to delete. + * @cdev: Qed dev pointer. + * @db_addr: Doorbell address. + * @db_data: Address where db_data is stored. Serves as key for the + * entry to delete. + * + * Return: Int. */ int (*db_recovery_del)(struct qed_dev *cdev, void __iomem *db_addr, void *db_data); /** - * @brief recovery_process - Trigger a recovery process + * recovery_process(): Trigger a recovery process. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*recovery_process)(struct qed_dev *cdev); /** - * @brief recovery_prolog - Execute the prolog operations of a recovery process + * recovery_prolog(): Execute the prolog operations of a recovery process. * - * @param cdev + * @cdev: Qed dev pointer. * - * @return 0 on success, error otherwise. + * Return: 0 on success, error otherwise. */ int (*recovery_prolog)(struct qed_dev *cdev); /** - * @brief update_drv_state - API to inform the change in the driver state. + * update_drv_state(): API to inform the change in the driver state. * - * @param cdev - * @param active + * @cdev: Qed dev pointer. + * @active: Active * + * Return: Int. */ int (*update_drv_state)(struct qed_dev *cdev, bool active); /** - * @brief update_mac - API to inform the change in the mac address + * update_mac(): API to inform the change in the mac address. * - * @param cdev - * @param mac + * @cdev: Qed dev pointer. + * @mac: MAC. * + * Return: Int. */ - int (*update_mac)(struct qed_dev *cdev, u8 *mac); + int (*update_mac)(struct qed_dev *cdev, const u8 *mac); /** - * @brief update_mtu - API to inform the change in the mtu + * update_mtu(): API to inform the change in the mtu. * - * @param cdev - * @param mtu + * @cdev: Qed dev pointer. + * @mtu: MTU. * + * Return: Int. */ int (*update_mtu)(struct qed_dev *cdev, u16 mtu); /** - * @brief update_wol - update of changes in the WoL configuration + * update_wol(): Update of changes in the WoL configuration. * - * @param cdev - * @param enabled - true iff WoL should be enabled. + * @cdev: Qed dev pointer. + * @enabled: true iff WoL should be enabled. + * + * Return: Int. */ int (*update_wol) (struct qed_dev *cdev, bool enabled); /** - * @brief read_module_eeprom + * read_module_eeprom(): Read EEPROM. + * + * @cdev: Qed dev pointer. + * @buf: buffer. + * @dev_addr: PHY device memory region. + * @offset: offset into eeprom contents to be read. + * @len: buffer length, i.e., max bytes to be read. * - * @param cdev - * @param buf - buffer - * @param dev_addr - PHY device memory region - * @param offset - offset into eeprom contents to be read - * @param len - buffer length, i.e., max bytes to be read + * Return: Int. */ int (*read_module_eeprom)(struct qed_dev *cdev, char *buf, u8 dev_addr, u32 offset, u32 len); /** - * @brief get_affin_hwfn_idx + * get_affin_hwfn_idx(): Get affine HW function. * - * @param cdev + * @cdev: Qed dev pointer. + * + * Return: u8. */ u8 (*get_affin_hwfn_idx)(struct qed_dev *cdev); /** - * @brief read_nvm_cfg - Read NVM config attribute value. - * @param cdev - * @param buf - buffer - * @param cmd - NVM CFG command id - * @param entity_id - Entity id + * read_nvm_cfg(): Read NVM config attribute value. + * + * @cdev: Qed dev pointer. + * @buf: Buffer. + * @cmd: NVM CFG command id. + * @entity_id: Entity id. * + * Return: Int. */ int (*read_nvm_cfg)(struct qed_dev *cdev, u8 **buf, u32 cmd, u32 entity_id); /** - * @brief read_nvm_cfg - Read NVM config attribute value. - * @param cdev - * @param cmd - NVM CFG command id + * read_nvm_cfg_len(): Read NVM config attribute value. * - * @return config id length, 0 on error. + * @cdev: Qed dev pointer. + * @cmd: NVM CFG command id. + * + * Return: config id length, 0 on error. */ int (*read_nvm_cfg_len)(struct qed_dev *cdev, u32 cmd); /** - * @brief set_grc_config - Configure value for grc config id. - * @param cdev - * @param cfg_id - grc config id - * @param val - grc config value + * set_grc_config(): Configure value for grc config id. + * + * @cdev: Qed dev pointer. + * @cfg_id: grc config id + * @val: grc config value * + * Return: Int. */ int (*set_grc_config)(struct qed_dev *cdev, u32 cfg_id, u32 val); @@ -1368,7 +1413,7 @@ static inline u16 qed_sb_update_sb_idx(struct qed_sb_info *sb_info) u16 rc = 0; prod = le32_to_cpu(sb_info->sb_virt->prod_index) & - STATUS_BLOCK_E4_PROD_INDEX_MASK; + STATUS_BLOCK_PROD_INDEX_MASK; if (sb_info->sb_ack != prod) { sb_info->sb_ack = prod; rc |= QED_SB_IDX; @@ -1379,18 +1424,16 @@ static inline u16 qed_sb_update_sb_idx(struct qed_sb_info *sb_info) } /** + * qed_sb_ack(): This function creates an update command for interrupts + * that is written to the IGU. * - * @brief This function creates an update command for interrupts that is - * written to the IGU. - * - * @param sb_info - This is the structure allocated and - * initialized per status block. Assumption is - * that it was initialized using qed_sb_init - * @param int_cmd - Enable/Disable/Nop - * @param upd_flg - whether igu consumer should be - * updated. + * @sb_info: This is the structure allocated and + * initialized per status block. Assumption is + * that it was initialized using qed_sb_init + * @int_cmd: Enable/Disable/Nop + * @upd_flg: Whether igu consumer should be updated. * - * @return inline void + * Return: inline void. */ static inline void qed_sb_ack(struct qed_sb_info *sb_info, enum igu_int_cmd int_cmd, |