diff options
Diffstat (limited to 'include/linux/regulator')
| -rw-r--r-- | include/linux/regulator/consumer.h | 47 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 7 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 18 |
3 files changed, 20 insertions, 52 deletions
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 39b666b40ea6..4660582a3302 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -33,6 +33,7 @@ #include <linux/err.h> #include <linux/suspend.h> +#include <regulator/regulator.h> struct device; struct notifier_block; @@ -85,52 +86,6 @@ struct regulator_dev; #define REGULATOR_MODE_STANDBY 0x8 /* - * Regulator notifier events. - * - * UNDER_VOLTAGE Regulator output is under voltage. - * OVER_CURRENT Regulator output current is too high. - * REGULATION_OUT Regulator output is out of regulation. - * FAIL Regulator output has failed. - * OVER_TEMP Regulator over temp. - * FORCE_DISABLE Regulator forcibly shut down by software. - * VOLTAGE_CHANGE Regulator voltage changed. - * Data passed is old voltage cast to (void *). - * DISABLE Regulator was disabled. - * PRE_VOLTAGE_CHANGE Regulator is about to have voltage changed. - * Data passed is "struct pre_voltage_change_data" - * ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason. - * Data passed is old voltage cast to (void *). - * PRE_DISABLE Regulator is about to be disabled - * ABORT_DISABLE Regulator disable failed for some reason - * - * NOTE: These events can be OR'ed together when passed into handler. - */ - -#define REGULATOR_EVENT_UNDER_VOLTAGE 0x01 -#define REGULATOR_EVENT_OVER_CURRENT 0x02 -#define REGULATOR_EVENT_REGULATION_OUT 0x04 -#define REGULATOR_EVENT_FAIL 0x08 -#define REGULATOR_EVENT_OVER_TEMP 0x10 -#define REGULATOR_EVENT_FORCE_DISABLE 0x20 -#define REGULATOR_EVENT_VOLTAGE_CHANGE 0x40 -#define REGULATOR_EVENT_DISABLE 0x80 -#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100 -#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 -#define REGULATOR_EVENT_PRE_DISABLE 0x400 -#define REGULATOR_EVENT_ABORT_DISABLE 0x800 -#define REGULATOR_EVENT_ENABLE 0x1000 -/* - * Following notifications should be emitted only if detected condition - * is such that the HW is likely to still be working but consumers should - * take a recovery action to prevent problems esacalating into errors. - */ -#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 -#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 -#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 -#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 -#define REGULATOR_EVENT_WARN_MASK 0x1E000 - -/* * Regulator errors that can be queried using regulator_get_error_flags * * UNDER_VOLTAGE Regulator output is under voltage. diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4b7eceb3828b..22a07c0900a4 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -51,12 +51,7 @@ enum regulator_detection_severity { /* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ -{ \ - .min = _min_uV, \ - .min_sel = _min_sel, \ - .max_sel = _max_sel, \ - .step = _step_uV, \ -} + LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) /** * struct regulator_ops - regulator operations. diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 621b7f4a3639..0cd76d264727 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -49,6 +49,13 @@ struct regulator; #define DISABLE_IN_SUSPEND 1 #define ENABLE_IN_SUSPEND 2 +/* + * Default time window (in milliseconds) following a critical under-voltage + * event during which less critical actions can be safely carried out by the + * system. + */ +#define REGULATOR_DEF_UV_LESS_CRITICAL_WINDOW_MS 10 + /* Regulator active discharge flags */ enum regulator_active_discharge { REGULATOR_ACTIVE_DISCHARGE_DEFAULT, @@ -127,6 +134,8 @@ struct notification_limit { * @ramp_disable: Disable ramp delay when initialising or when setting voltage. * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. + * @system_critical: Set if the regulator is critical to system stability or + * functionality. * @over_current_protection: Auto disable on over current event. * * @over_current_detection: Configure over current limits. @@ -153,6 +162,13 @@ struct notification_limit { * regulator_active_discharge values are used for * initialisation. * @enable_time: Turn-on time of the rails (unit: microseconds) + * @uv_less_critical_window_ms: Specifies the time window (in milliseconds) + * following a critical under-voltage (UV) event + * during which less critical actions can be + * safely carried out by the system (for example + * logging). After this time window more critical + * actions should be done (for example prevent + * HW damage). */ struct regulation_constraints { @@ -204,6 +220,7 @@ struct regulation_constraints { unsigned int settling_time_up; unsigned int settling_time_down; unsigned int enable_time; + unsigned int uv_less_critical_window_ms; unsigned int active_discharge; @@ -214,6 +231,7 @@ struct regulation_constraints { unsigned ramp_disable:1; /* disable ramp delay */ unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ + unsigned system_critical:1; /* critical to system stability */ unsigned over_current_protection:1; /* auto disable on over current */ unsigned over_current_detection:1; /* notify on over current */ unsigned over_voltage_detection:1; /* notify on over voltage */ |