summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/Kbuild4
-rw-r--r--include/linux/alarmtimer.h3
-rw-r--r--include/linux/amba/bus.h8
-rw-r--r--include/linux/audit.h8
-rw-r--r--include/linux/bcma/bcma.h1
-rw-r--r--include/linux/blkdev.h3
-rw-r--r--include/linux/capability.h5
-rw-r--r--include/linux/cgroup.h81
-rw-r--r--include/linux/clk.h32
-rw-r--r--include/linux/clkdev.h3
-rw-r--r--include/linux/cpu.h2
-rw-r--r--include/linux/cs5535.h1
-rw-r--r--include/linux/dcache.h21
-rw-r--r--include/linux/device.h34
-rw-r--r--include/linux/dlm.h1
-rw-r--r--include/linux/dmar.h85
-rw-r--r--include/linux/dynamic_debug.h22
-rw-r--r--include/linux/eventpoll.h12
-rw-r--r--include/linux/extcon.h324
-rw-r--r--include/linux/extcon/extcon_gpio.h52
-rw-r--r--include/linux/filter.h12
-rw-r--r--include/linux/firewire.h15
-rw-r--r--include/linux/fs.h1
-rw-r--r--include/linux/fsl_devices.h9
-rw-r--r--include/linux/ftrace.h19
-rw-r--r--include/linux/ftrace_event.h2
-rw-r--r--include/linux/generic_serial.h64
-rw-r--r--include/linux/genhd.h6
-rw-r--r--include/linux/hid.h36
-rw-r--r--include/linux/hidraw.h4
-rw-r--r--include/linux/hyperv.h4
-rw-r--r--include/linux/i2c-pnx.h10
-rw-r--r--include/linux/i2c/twl.h13
-rw-r--r--include/linux/if_ec.h68
-rw-r--r--include/linux/iio/buffer.h191
-rw-r--r--include/linux/iio/consumer.h96
-rw-r--r--include/linux/iio/driver.h34
-rw-r--r--include/linux/iio/events.h105
-rw-r--r--include/linux/iio/iio.h492
-rw-r--r--include/linux/iio/kfifo_buf.h8
-rw-r--r--include/linux/iio/machine.h24
-rw-r--r--include/linux/iio/sysfs.h117
-rw-r--r--include/linux/iio/trigger.h119
-rw-r--r--include/linux/iio/trigger_consumer.h52
-rw-r--r--include/linux/iio/types.h55
-rw-r--r--include/linux/interrupt.h8
-rw-r--r--include/linux/ioport.h7
-rw-r--r--include/linux/irq.h5
-rw-r--r--include/linux/isdn.h26
-rw-r--r--include/linux/kernel.h13
-rw-r--r--include/linux/key.h11
-rw-r--r--include/linux/keyctl.h1
-rw-r--r--include/linux/libata.h1
-rw-r--r--include/linux/lockdep.h18
-rw-r--r--include/linux/lsm_audit.h6
-rw-r--r--include/linux/mei.h110
-rw-r--r--include/linux/mfd/abx500.h5
-rw-r--r--include/linux/mfd/abx500/ab5500.h140
-rw-r--r--include/linux/mfd/asic3.h1
-rw-r--r--include/linux/mfd/da9052/da9052.h1
-rw-r--r--include/linux/mfd/db5500-prcmu.h105
-rw-r--r--include/linux/mfd/dbx500-prcmu.h242
-rw-r--r--include/linux/mfd/max8997.h23
-rw-r--r--include/linux/mfd/mc13xxx.h11
-rw-r--r--include/linux/mfd/palmas.h2620
-rw-r--r--include/linux/mfd/rc5t583.h29
-rw-r--r--include/linux/mfd/s5m87xx/s5m-core.h1
-rw-r--r--include/linux/mfd/s5m87xx/s5m-pmic.h29
-rw-r--r--include/linux/mfd/tps65090.h13
-rw-r--r--include/linux/mfd/tps6586x.h1
-rw-r--r--include/linux/mfd/wm831x/pdata.h2
-rw-r--r--include/linux/mfd/wm8994/core.h12
-rw-r--r--include/linux/mlx4/device.h8
-rw-r--r--include/linux/mlx4/qp.h3
-rw-r--r--include/linux/mm.h6
-rw-r--r--include/linux/mmzone.h2
-rw-r--r--include/linux/mod_devicetable.h4
-rw-r--r--include/linux/moduleparam.h3
-rw-r--r--include/linux/mtd/ubi.h31
-rw-r--r--include/linux/netdevice.h2
-rw-r--r--include/linux/of.h51
-rw-r--r--include/linux/of_serial.h17
-rw-r--r--include/linux/pci.h9
-rw-r--r--include/linux/percpu.h54
-rw-r--r--include/linux/perf_event.h5
-rw-r--r--include/linux/pinctrl/consumer.h44
-rw-r--r--include/linux/pinctrl/machine.h7
-rw-r--r--include/linux/pinctrl/pinconf.h6
-rw-r--r--include/linux/pinctrl/pinctrl-state.h13
-rw-r--r--include/linux/pinctrl/pinctrl.h22
-rw-r--r--include/linux/pinctrl/pinmux.h9
-rw-r--r--include/linux/platform_data/at91_adc.h61
-rw-r--r--include/linux/platform_data/ehci-sh.h28
-rw-r--r--include/linux/platform_data/emif_plat.h128
-rw-r--r--include/linux/platform_data/gpio-em.h10
-rw-r--r--include/linux/platform_data/ina2xx.h19
-rw-r--r--include/linux/platform_data/s3c-hsotg.h35
-rw-r--r--include/linux/platform_data/tegra_usb.h1
-rw-r--r--include/linux/pm.h2
-rw-r--r--include/linux/pm_domain.h13
-rw-r--r--include/linux/pm_runtime.h3
-rw-r--r--include/linux/pm_wakeup.h15
-rw-r--r--include/linux/prctl.h15
-rw-r--r--include/linux/printk.h13
-rw-r--r--include/linux/pstore_ram.h98
-rw-r--r--include/linux/ptrace.h5
-rw-r--r--include/linux/raid/md_p.h15
-rw-r--r--include/linux/raid/pq.h18
-rw-r--r--include/linux/ramoops.h17
-rw-r--r--include/linux/rational.h2
-rw-r--r--include/linux/rculist.h40
-rw-r--r--include/linux/rcupdate.h20
-rw-r--r--include/linux/rcutiny.h11
-rw-r--r--include/linux/rcutree.h19
-rw-r--r--include/linux/regmap.h44
-rw-r--r--include/linux/regulator/driver.h73
-rw-r--r--include/linux/regulator/fixed.h7
-rw-r--r--include/linux/regulator/of_regulator.h18
-rw-r--r--include/linux/regulator/tps62360.h6
-rw-r--r--include/linux/regulator/tps65090-regulator.h50
-rw-r--r--include/linux/res_counter.h2
-rw-r--r--include/linux/ring_buffer.h6
-rw-r--r--include/linux/sched.h63
-rw-r--r--include/linux/seccomp.h107
-rw-r--r--include/linux/security.h14
-rw-r--r--include/linux/serial_8250.h2
-rw-r--r--include/linux/serial_core.h5
-rw-r--r--include/linux/serial_sci.h2
-rw-r--r--include/linux/sh_clk.h34
-rw-r--r--include/linux/sh_intc.h1
-rw-r--r--include/linux/skbuff.h47
-rw-r--r--include/linux/smp.h6
-rw-r--r--include/linux/spi/eeprom.h10
-rw-r--r--include/linux/srcu.h48
-rw-r--r--include/linux/suspend.h14
-rw-r--r--include/linux/sysfs.h12
-rw-r--r--include/linux/tcp.h2
-rw-r--r--include/linux/thread_info.h6
-rw-r--r--include/linux/ti_wilink_st.h2
-rw-r--r--include/linux/topology.h46
-rw-r--r--include/linux/tty.h23
-rw-r--r--include/linux/tty_ldisc.h2
-rw-r--r--include/linux/usb.h79
-rw-r--r--include/linux/usb/ch11.h2
-rw-r--r--include/linux/usb/ch9.h58
-rw-r--r--include/linux/usb/chipidea.h28
-rw-r--r--include/linux/usb/composite.h6
-rw-r--r--include/linux/usb/functionfs.h4
-rw-r--r--include/linux/usb/gpio_vbus.h2
-rw-r--r--include/linux/usb/hcd.h32
-rw-r--r--include/linux/usb/isp1301.h80
-rw-r--r--include/linux/usb/langwell_udc.h310
-rw-r--r--include/linux/usb/serial.h34
-rw-r--r--include/linux/uuid.h4
-rw-r--r--include/linux/virtio_config.h11
-rw-r--r--include/linux/vme.h174
-rw-r--r--include/linux/vt_kern.h1
157 files changed, 6513 insertions, 1547 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index b738f2dc38d9..39737839ce29 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -167,7 +167,6 @@ header-y += if_arp.h
header-y += if_bonding.h
header-y += if_bridge.h
header-y += if_cablemodem.h
-header-y += if_ec.h
header-y += if_eql.h
header-y += if_ether.h
header-y += if_fc.h
@@ -239,6 +238,7 @@ header-y += map_to_7segment.h
header-y += matroxfb.h
header-y += mdio.h
header-y += media.h
+header-y += mei.h
header-y += mempolicy.h
header-y += meye.h
header-y += mii.h
@@ -331,6 +331,7 @@ header-y += scc.h
header-y += sched.h
header-y += screen_info.h
header-y += sdla.h
+header-y += seccomp.h
header-y += securebits.h
header-y += selinux_netlink.h
header-y += sem.h
@@ -380,6 +381,7 @@ header-y += unistd.h
header-y += usbdevice_fs.h
header-y += utime.h
header-y += utsname.h
+header-y += uuid.h
header-y += uvcvideo.h
header-y += v4l2-mediabus.h
header-y += v4l2-subdev.h
diff --git a/include/linux/alarmtimer.h b/include/linux/alarmtimer.h
index 975009e1cbe6..96c5c249b086 100644
--- a/include/linux/alarmtimer.h
+++ b/include/linux/alarmtimer.h
@@ -76,4 +76,7 @@ static inline int alarmtimer_callback_running(struct alarm *timer)
}
+/* Provide way to access the rtc device being used by alarmtimers */
+struct rtc_device *alarmtimer_get_rtcdev(void);
+
#endif
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 8d54f79457ba..d36417158d8f 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -63,6 +63,14 @@ struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
void amba_device_put(struct amba_device *);
int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
+struct amba_device *amba_apb_device_add(struct device *parent, const char *name,
+ resource_size_t base, size_t size,
+ int irq1, int irq2, void *pdata,
+ unsigned int periphid);
+struct amba_device *amba_ahb_device_add(struct device *parent, const char *name,
+ resource_size_t base, size_t size,
+ int irq1, int irq2, void *pdata,
+ unsigned int periphid);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
int amba_request_regions(struct amba_device *, const char *);
diff --git a/include/linux/audit.h b/include/linux/audit.h
index ed3ef1972496..22f292a917a3 100644
--- a/include/linux/audit.h
+++ b/include/linux/audit.h
@@ -463,7 +463,7 @@ extern void audit_putname(const char *name);
extern void __audit_inode(const char *name, const struct dentry *dentry);
extern void __audit_inode_child(const struct dentry *dentry,
const struct inode *parent);
-extern void __audit_seccomp(unsigned long syscall);
+extern void __audit_seccomp(unsigned long syscall, long signr, int code);
extern void __audit_ptrace(struct task_struct *t);
static inline int audit_dummy_context(void)
@@ -508,10 +508,10 @@ static inline void audit_inode_child(const struct dentry *dentry,
}
void audit_core_dumps(long signr);
-static inline void audit_seccomp(unsigned long syscall)
+static inline void audit_seccomp(unsigned long syscall, long signr, int code)
{
if (unlikely(!audit_dummy_context()))
- __audit_seccomp(syscall);
+ __audit_seccomp(syscall, signr, code);
}
static inline void audit_ptrace(struct task_struct *t)
@@ -634,7 +634,7 @@ extern int audit_signals;
#define audit_inode(n,d) do { (void)(d); } while (0)
#define audit_inode_child(i,p) do { ; } while (0)
#define audit_core_dumps(i) do { ; } while (0)
-#define audit_seccomp(i) do { ; } while (0)
+#define audit_seccomp(i,s,c) do { ; } while (0)
#define auditsc_get_stamp(c,t,s) (0)
#define audit_get_loginuid(t) (-1)
#define audit_get_sessionid(t) (-1)
diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h
index 5af9a075498f..98bb2901d7b7 100644
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -139,6 +139,7 @@ struct bcma_device {
u8 core_unit;
u32 addr;
+ u32 addr1;
u32 wrap;
void __iomem *io_addr;
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 2aa24664a5b5..4d4ac24a263e 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -1,9 +1,10 @@
#ifndef _LINUX_BLKDEV_H
#define _LINUX_BLKDEV_H
+#include <linux/sched.h>
+
#ifdef CONFIG_BLOCK
-#include <linux/sched.h>
#include <linux/major.h>
#include <linux/genhd.h>
#include <linux/list.h>
diff --git a/include/linux/capability.h b/include/linux/capability.h
index 12d52dedb229..c398cff3dab7 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -360,8 +360,11 @@ struct cpu_vfs_cap_data {
#define CAP_WAKE_ALARM 35
+/* Allow preventing system suspends while epoll events are pending */
-#define CAP_LAST_CAP CAP_WAKE_ALARM
+#define CAP_EPOLLWAKEUP 36
+
+#define CAP_LAST_CAP CAP_EPOLLWAKEUP
#define cap_valid(x) ((x) >= 0 && (x) <= CAP_LAST_CAP)
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 5a85b3415c1b..d3f5fba2c159 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -16,6 +16,7 @@
#include <linux/prio_heap.h>
#include <linux/rwsem.h>
#include <linux/idr.h>
+#include <linux/workqueue.h>
#ifdef CONFIG_CGROUPS
@@ -76,12 +77,16 @@ struct cgroup_subsys_state {
unsigned long flags;
/* ID for this css, if possible */
struct css_id __rcu *id;
+
+ /* Used to put @cgroup->dentry on the last css_put() */
+ struct work_struct dput_work;
};
/* bits in struct cgroup_subsys_state flags field */
enum {
CSS_ROOT, /* This CSS is the root of the subsystem */
CSS_REMOVED, /* This CSS is dead */
+ CSS_CLEAR_CSS_REFS, /* @ss->__DEPRECATED_clear_css_refs */
};
/* Caller must verify that the css is not for root cgroup */
@@ -115,16 +120,12 @@ static inline bool css_is_removed(struct cgroup_subsys_state *css)
* the css has been destroyed.
*/
+extern bool __css_tryget(struct cgroup_subsys_state *css);
static inline bool css_tryget(struct cgroup_subsys_state *css)
{
if (test_bit(CSS_ROOT, &css->flags))
return true;
- while (!atomic_inc_not_zero(&css->refcnt)) {
- if (test_bit(CSS_REMOVED, &css->flags))
- return false;
- cpu_relax();
- }
- return true;
+ return __css_tryget(css);
}
/*
@@ -132,11 +133,11 @@ static inline bool css_tryget(struct cgroup_subsys_state *css)
* css_get() or css_tryget()
*/
-extern void __css_put(struct cgroup_subsys_state *css, int count);
+extern void __css_put(struct cgroup_subsys_state *css);
static inline void css_put(struct cgroup_subsys_state *css)
{
if (!test_bit(CSS_ROOT, &css->flags))
- __css_put(css, 1);
+ __css_put(css);
}
/* bits in struct cgroup flags field */
@@ -175,6 +176,7 @@ struct cgroup {
*/
struct list_head sibling; /* my parent's children */
struct list_head children; /* my children */
+ struct list_head files; /* my files */
struct cgroup *parent; /* my parent */
struct dentry __rcu *dentry; /* cgroup fs entry, RCU protected */
@@ -191,6 +193,9 @@ struct cgroup {
*/
struct list_head css_sets;
+ struct list_head allcg_node; /* cgroupfs_root->allcg_list */
+ struct list_head cft_q_node; /* used during cftype add/rm */
+
/*
* Linked list running through all cgroups that can
* potentially be reaped by the release agent. Protected by
@@ -275,11 +280,17 @@ struct cgroup_map_cb {
* - the 'cftype' of the file is file->f_dentry->d_fsdata
*/
-#define MAX_CFTYPE_NAME 64
+/* cftype->flags */
+#define CFTYPE_ONLY_ON_ROOT (1U << 0) /* only create on root cg */
+#define CFTYPE_NOT_ON_ROOT (1U << 1) /* don't create onp root cg */
+
+#define MAX_CFTYPE_NAME 64
+
struct cftype {
/*
* By convention, the name should begin with the name of the
- * subsystem, followed by a period
+ * subsystem, followed by a period. Zero length string indicates
+ * end of cftype array.
*/
char name[MAX_CFTYPE_NAME];
int private;
@@ -295,6 +306,9 @@ struct cftype {
*/
size_t max_write_len;
+ /* CFTYPE_* flags */
+ unsigned int flags;
+
int (*open)(struct inode *inode, struct file *file);
ssize_t (*read)(struct cgroup *cgrp, struct cftype *cft,
struct file *file,
@@ -373,6 +387,16 @@ struct cftype {
struct eventfd_ctx *eventfd);
};
+/*
+ * cftype_sets describe cftypes belonging to a subsystem and are chained at
+ * cgroup_subsys->cftsets. Each cftset points to an array of cftypes
+ * terminated by zero length name.
+ */
+struct cftype_set {
+ struct list_head node; /* chained at subsys->cftsets */
+ const struct cftype *cfts;
+};
+
struct cgroup_scanner {
struct cgroup *cg;
int (*test_task)(struct task_struct *p, struct cgroup_scanner *scan);
@@ -382,21 +406,8 @@ struct cgroup_scanner {
void *data;
};
-/*
- * Add a new file to the given cgroup directory. Should only be
- * called by subsystems from within a populate() method
- */
-int cgroup_add_file(struct cgroup *cgrp, struct cgroup_subsys *subsys,
- const struct cftype *cft);
-
-/*
- * Add a set of new files to the given cgroup directory. Should
- * only be called by subsystems from within a populate() method
- */
-int cgroup_add_files(struct cgroup *cgrp,
- struct cgroup_subsys *subsys,
- const struct cftype cft[],
- int count);
+int cgroup_add_cftypes(struct cgroup_subsys *ss, const struct cftype *cfts);
+int cgroup_rm_cftypes(struct cgroup_subsys *ss, const struct cftype *cfts);
int cgroup_is_removed(const struct cgroup *cgrp);
@@ -461,7 +472,6 @@ struct cgroup_subsys {
void (*fork)(struct task_struct *task);
void (*exit)(struct cgroup *cgrp, struct cgroup *old_cgrp,
struct task_struct *task);
- int (*populate)(struct cgroup_subsys *ss, struct cgroup *cgrp);
void (*post_clone)(struct cgroup *cgrp);
void (*bind)(struct cgroup *root);
@@ -474,6 +484,18 @@ struct cgroup_subsys {
* (not available in early_init time.)
*/
bool use_id;
+
+ /*
+ * If %true, cgroup removal will try to clear css refs by retrying
+ * ss->pre_destroy() until there's no css ref left. This behavior
+ * is strictly for backward compatibility and will be removed as
+ * soon as the current user (memcg) is updated.
+ *
+ * If %false, ss->pre_destroy() can't fail and cgroup removal won't
+ * wait for css refs to drop to zero before proceeding.
+ */
+ bool __DEPRECATED_clear_css_refs;
+
#define MAX_CGROUP_TYPE_NAMELEN 32
const char *name;
@@ -500,6 +522,13 @@ struct cgroup_subsys {
struct idr idr;
spinlock_t id_lock;
+ /* list of cftype_sets */
+ struct list_head cftsets;
+
+ /* base cftypes, automatically [de]registered with subsys itself */
+ struct cftype *base_cftypes;
+ struct cftype_set base_cftset;
+
/* should be defined only by modular subsystems */
struct module *module;
};
diff --git a/include/linux/clk.h b/include/linux/clk.h
index b0252726df61..70cf722ac3af 100644
--- a/include/linux/clk.h
+++ b/include/linux/clk.h
@@ -101,6 +101,26 @@ int clk_notifier_unregister(struct clk *clk, struct notifier_block *nb);
struct clk *clk_get(struct device *dev, const char *id);
/**
+ * devm_clk_get - lookup and obtain a managed reference to a clock producer.
+ * @dev: device for clock "consumer"
+ * @id: clock comsumer ID
+ *
+ * Returns a struct clk corresponding to the clock producer, or
+ * valid IS_ERR() condition containing errno. The implementation
+ * uses @dev and @id to determine the clock consumer, and thereby
+ * the clock producer. (IOW, @id may be identical strings, but
+ * clk_get may return different clock producers depending on @dev.)
+ *
+ * Drivers must assume that the clock source is not enabled.
+ *
+ * devm_clk_get should not be called from within interrupt context.
+ *
+ * The clock will automatically be freed when the device is unbound
+ * from the bus.
+ */
+struct clk *devm_clk_get(struct device *dev, const char *id);
+
+/**
* clk_prepare - prepare a clock source
* @clk: clock source
*
@@ -206,6 +226,18 @@ unsigned long clk_get_rate(struct clk *clk);
*/
void clk_put(struct clk *clk);
+/**
+ * devm_clk_put - "free" a managed clock source
+ * @dev: device used to acuqire the clock
+ * @clk: clock source acquired with devm_clk_get()
+ *
+ * Note: drivers must ensure that all clk_enable calls made on this
+ * clock source are balanced by clk_disable calls prior to calling
+ * this function.
+ *
+ * clk_put should not be called from within interrupt context.
+ */
+void devm_clk_put(struct device *dev, struct clk *clk);
/*
* The remaining APIs are optional for machine class support.
diff --git a/include/linux/clkdev.h b/include/linux/clkdev.h
index d9a4fd028c9d..a6a6f603103b 100644
--- a/include/linux/clkdev.h
+++ b/include/linux/clkdev.h
@@ -40,4 +40,7 @@ void clkdev_drop(struct clk_lookup *cl);
void clkdev_add_table(struct clk_lookup *, size_t);
int clk_add_alias(const char *, const char *, char *, struct device *);
+int clk_register_clkdev(struct clk *, const char *, const char *, ...);
+int clk_register_clkdevs(struct clk *, struct clk_lookup *, size_t);
+
#endif
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index ee28844ae68e..7230bb59a06f 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -36,8 +36,6 @@ extern void cpu_remove_dev_attr(struct device_attribute *attr);
extern int cpu_add_dev_attr_group(struct attribute_group *attrs);
extern void cpu_remove_dev_attr_group(struct attribute_group *attrs);
-extern int sched_create_sysfs_power_savings_entries(struct device *dev);
-
#ifdef CONFIG_HOTPLUG_CPU
extern void unregister_cpu(struct cpu *cpu);
extern ssize_t arch_cpu_probe(const char *, size_t);
diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h
index c077aec3a6ff..cfe83239d7f0 100644
--- a/include/linux/cs5535.h
+++ b/include/linux/cs5535.h
@@ -95,6 +95,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group,
/* CS5536_PM1_STS bits */
#define CS5536_WAK_FLAG (1 << 15)
+#define CS5536_RTC_FLAG (1 << 10)
#define CS5536_PWRBTN_FLAG (1 << 8)
/* CS5536_PM1_EN bits */
diff --git a/include/linux/dcache.h b/include/linux/dcache.h
index 7e11f1418203..094789ff3e9f 100644
--- a/include/linux/dcache.h
+++ b/include/linux/dcache.h
@@ -25,6 +25,13 @@ struct vfsmount;
#define IS_ROOT(x) ((x) == (x)->d_parent)
+/* The hash is always the low bits of hash_len */
+#ifdef __LITTLE_ENDIAN
+ #define HASH_LEN_DECLARE u32 hash; u32 len;
+#else
+ #define HASH_LEN_DECLARE u32 len; u32 hash;
+#endif
+
/*
* "quick string" -- eases parameter passing, but more importantly
* saves "metadata" about the string (ie length and the hash).
@@ -33,11 +40,19 @@ struct vfsmount;
* dentry.
*/
struct qstr {
- unsigned int hash;
- unsigned int len;
+ union {
+ struct {
+ HASH_LEN_DECLARE;
+ };
+ u64 hash_len;
+ };
const unsigned char *name;
};
+#define QSTR_INIT(n,l) { { { .len = l } }, .name = n }
+#define hashlen_hash(hashlen) ((u32) (hashlen))
+#define hashlen_len(hashlen) ((u32)((hashlen) >> 32))
+
struct dentry_stat_t {
int nr_dentry;
int nr_unused;
@@ -282,7 +297,7 @@ extern struct dentry *d_hash_and_lookup(struct dentry *, struct qstr *);
extern struct dentry *__d_lookup(struct dentry *, struct qstr *);
extern struct dentry *__d_lookup_rcu(const struct dentry *parent,
const struct qstr *name,
- unsigned *seq, struct inode **inode);
+ unsigned *seq, struct inode *inode);
/**
* __d_rcu_to_refcount - take a refcount on dentry if sequence check is ok
diff --git a/include/linux/device.h b/include/linux/device.h
index 5ad17cccdd71..e04f5776f6d0 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -23,6 +23,7 @@
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/atomic.h>
+#include <linux/ratelimit.h>
#include <asm/device.h>
struct device;
@@ -502,7 +503,10 @@ ssize_t device_store_int(struct device *dev, struct device_attribute *attr,
{ __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
#define DEVICE_INT_ATTR(_name, _mode, _var) \
struct dev_ext_attribute dev_attr_##_name = \
- { __ATTR(_name, _mode, device_show_ulong, device_store_ulong), &(_var) }
+ { __ATTR(_name, _mode, device_show_int, device_store_int), &(_var) }
+#define DEVICE_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) \
+ struct device_attribute dev_attr_##_name = \
+ __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)
extern int device_create_file(struct device *device,
const struct device_attribute *entry);
@@ -541,6 +545,8 @@ extern void *devres_remove(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
extern int devres_destroy(struct device *dev, dr_release_t release,
dr_match_t match, void *match_data);
+extern int devres_release(struct device *dev, dr_release_t release,
+ dr_match_t match, void *match_data);
/* devres group */
extern void * __must_check devres_open_group(struct device *dev, void *id,
@@ -931,6 +937,32 @@ int _dev_info(const struct device *dev, const char *fmt, ...)
#endif
+#define dev_level_ratelimited(dev_level, dev, fmt, ...) \
+do { \
+ static DEFINE_RATELIMIT_STATE(_rs, \
+ DEFAULT_RATELIMIT_INTERVAL, \
+ DEFAULT_RATELIMIT_BURST); \
+ if (__ratelimit(&_rs)) \
+ dev_level(dev, fmt, ##__VA_ARGS__); \
+} while (0)
+
+#define dev_emerg_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_emerg, dev, fmt, ##__VA_ARGS__)
+#define dev_alert_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_alert, dev, fmt, ##__VA_ARGS__)
+#define dev_crit_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_crit, dev, fmt, ##__VA_ARGS__)
+#define dev_err_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_err, dev, fmt, ##__VA_ARGS__)
+#define dev_warn_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_warn, dev, fmt, ##__VA_ARGS__)
+#define dev_notice_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_notice, dev, fmt, ##__VA_ARGS__)
+#define dev_info_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_info, dev, fmt, ##__VA_ARGS__)
+#define dev_dbg_ratelimited(dev, fmt, ...) \
+ dev_level_ratelimited(dev_dbg, dev, fmt, ##__VA_ARGS__)
+
/*
* Stupid hackaround for existing uses of non-printk uses dev_info
*
diff --git a/include/linux/dlm.h b/include/linux/dlm.h
index 6c7f6e9546c7..520152411cd1 100644
--- a/include/linux/dlm.h
+++ b/include/linux/dlm.h
@@ -67,7 +67,6 @@ struct dlm_lksb {
/* dlm_new_lockspace() flags */
-#define DLM_LSFL_NODIR 0x00000001
#define DLM_LSFL_TIMEWARN 0x00000002
#define DLM_LSFL_FS 0x00000004
#define DLM_LSFL_NEWEXCL 0x00000008
diff --git a/include/linux/dmar.h b/include/linux/dmar.h
index 731a60975101..b029d1aa2d12 100644
--- a/include/linux/dmar.h
+++ b/include/linux/dmar.h
@@ -114,91 +114,6 @@ struct irte {
};
};
-#ifdef CONFIG_IRQ_REMAP
-extern int intr_remapping_enabled;
-extern int intr_remapping_supported(void);
-extern int enable_intr_remapping(void);
-extern void disable_intr_remapping(void);
-extern int reenable_intr_remapping(int);
-
-extern int get_irte(int irq, struct irte *entry);
-extern int modify_irte(int irq, struct irte *irte_modified);
-extern int alloc_irte(struct intel_iommu *iommu, int irq, u16 count);
-extern int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
- u16 sub_handle);
-extern int map_irq_to_irte_handle(int irq, u16 *sub_handle);
-extern int free_irte(int irq);
-
-extern struct intel_iommu *map_dev_to_ir(struct pci_dev *dev);
-extern struct intel_iommu *map_ioapic_to_ir(int apic);
-extern struct intel_iommu *map_hpet_to_ir(u8 id);
-extern int set_ioapic_sid(struct irte *irte, int apic);
-extern int set_hpet_sid(struct irte *irte, u8 id);
-extern int set_msi_sid(struct irte *irte, struct pci_dev *dev);
-#else
-static inline int alloc_irte(struct intel_iommu *iommu, int irq, u16 count)
-{
- return -1;
-}
-static inline int modify_irte(int irq, struct irte *irte_modified)
-{
- return -1;
-}
-static inline int free_irte(int irq)
-{
- return -1;
-}
-static inline int map_irq_to_irte_handle(int irq, u16 *sub_handle)
-{
- return -1;
-}
-static inline int set_irte_irq(int irq, struct intel_iommu *iommu, u16 index,
- u16 sub_handle)
-{
- return -1;
-}
-static inline struct intel_iommu *map_dev_to_ir(struct pci_dev *dev)
-{
- return NULL;
-}
-static inline struct intel_iommu *map_ioapic_to_ir(int apic)
-{
- return NULL;
-}
-static inline struct intel_iommu *map_hpet_to_ir(unsigned int hpet_id)
-{
- return NULL;
-}
-static inline int set_ioapic_sid(struct irte *irte, int apic)
-{
- return 0;
-}
-static inline int set_hpet_sid(struct irte *irte, u8 id)
-{
- return -1;
-}
-static inline int set_msi_sid(struct irte *irte, struct pci_dev *dev)
-{
- return 0;
-}
-
-#define intr_remapping_enabled (0)
-
-static inline int enable_intr_remapping(void)
-{
- return -1;
-}
-
-static inline void disable_intr_remapping(void)
-{
-}
-
-static inline int reenable_intr_remapping(int eim)
-{
- return 0;
-}
-#endif
-
enum {
IRQ_REMAP_XAPIC_MODE,
IRQ_REMAP_X2APIC_MODE,
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 7e3c53a900d8..c18257b0fa72 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -17,8 +17,8 @@ struct _ddebug {
const char *format;
unsigned int lineno:18;
/*
- * The flags field controls the behaviour at the callsite.
- * The bits here are changed dynamically when the user
+ * The flags field controls the behaviour at the callsite.
+ * The bits here are changed dynamically when the user
* writes commands to <debugfs>/dynamic_debug/control
*/
#define _DPRINTK_FLAGS_NONE 0
@@ -44,6 +44,9 @@ extern int ddebug_remove_module(const char *mod_name);
extern __printf(2, 3)
int __dynamic_pr_debug(struct _ddebug *descriptor, const char *fmt, ...);
+extern int ddebug_dyndbg_module_param_cb(char *param, char *val,
+ const char *modname);
+
struct device;
extern __printf(3, 4)
@@ -94,11 +97,26 @@ do { \
#else
+#include <linux/string.h>
+#include <linux/errno.h>
+
static inline int ddebug_remove_module(const char *mod)
{
return 0;
}
+static inline int ddebug_dyndbg_module_param_cb(char *param, char *val,
+ const char *modname)
+{
+ if (strstr(param, "dyndbg")) {
+ /* avoid pr_warn(), which wants pr_fmt() fully defined */
+ printk(KERN_WARNING "dyndbg param is supported only in "
+ "CONFIG_DYNAMIC_DEBUG builds\n");
+ return 0; /* allow and ignore */
+ }
+ return -EINVAL;
+}
+
#define dynamic_pr_debug(fmt, ...) \
do { if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); } while (0)
#define dynamic_dev_dbg(dev, fmt, ...) \
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 657ab55beda0..6f8be328770a 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -26,6 +26,18 @@
#define EPOLL_CTL_DEL 2
#define EPOLL_CTL_MOD 3
+/*
+ * Request the handling of system wakeup events so as to prevent system suspends
+ * from happening while those events are being processed.
+ *
+ * Assuming neither EPOLLET nor EPOLLONESHOT is set, system suspends will not be
+ * re-allowed until epoll_wait is called again after consuming the wakeup
+ * event(s).
+ *
+ * Requires CAP_EPOLLWAKEUP
+ */
+#define EPOLLWAKEUP (1 << 29)
+
/* Set the One Shot behaviour for the target file descriptor */
#define EPOLLONESHOT (1 << 30)
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
new file mode 100644
index 000000000000..cdd401477656
--- /dev/null
+++ b/include/linux/extcon.h
@@ -0,0 +1,324 @@
+/*
+ * External connector (extcon) class driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: Donggeun Kim <dg77.kim@samsung.com>
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * based on switch class driver
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+*/
+
+#ifndef __LINUX_EXTCON_H__
+#define __LINUX_EXTCON_H__
+
+#include <linux/notifier.h>
+
+#define SUPPORTED_CABLE_MAX 32
+#define CABLE_NAME_MAX 30
+
+/*
+ * The standard cable name is to help support general notifier
+ * and notifee device drivers to share the common names.
+ * Please use standard cable names unless your notifier device has
+ * a very unique and abnormal cable or
+ * the cable type is supposed to be used with only one unique
+ * pair of notifier/notifee devices.
+ *
+ * Please add any other "standard" cables used with extcon dev.
+ *
+ * You may add a dot and number to specify version or specification
+ * of the specific cable if it is required. (e.g., "Fast-charger.18"
+ * and "Fast-charger.10" for 1.8A and 1.0A chargers)
+ * However, the notifee and notifier should be able to handle such
+ * string and if the notifee can negotiate the protocol or idenify,
+ * you don't need such convention. This convention is helpful when
+ * notifier can distinguish but notifiee cannot.
+ */
+enum extcon_cable_name {
+ EXTCON_USB = 0,
+ EXTCON_USB_HOST,
+ EXTCON_TA, /* Travel Adaptor */
+ EXTCON_FAST_CHARGER,
+ EXTCON_SLOW_CHARGER,
+ EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
+ EXTCON_HDMI,
+ EXTCON_MHL,
+ EXTCON_DVI,
+ EXTCON_VGA,
+ EXTCON_DOCK,
+ EXTCON_LINE_IN,
+ EXTCON_LINE_OUT,
+ EXTCON_MIC_IN,
+ EXTCON_HEADPHONE_OUT,
+ EXTCON_SPDIF_IN,
+ EXTCON_SPDIF_OUT,
+ EXTCON_VIDEO_IN,
+ EXTCON_VIDEO_OUT,
+ EXTCON_MECHANICAL,
+};
+extern const char *extcon_cable_name[];
+
+struct extcon_cable;
+
+/**
+ * struct extcon_dev - An extcon device represents one external connector.
+ * @name The name of this extcon device. Parent device name is used
+ * if NULL.
+ * @supported_cable Array of supported cable name ending with NULL.
+ * If supported_cable is NULL, cable name related APIs
+ * are disabled.
+ * @mutually_exclusive Array of mutually exclusive set of cables that cannot
+ * be attached simultaneously. The array should be
+ * ending with NULL or be NULL (no mutually exclusive
+ * cables). For example, if it is { 0x7, 0x30, 0}, then,
+ * {0, 1}, {0, 1, 2}, {0, 2}, {1, 2}, or {4, 5} cannot
+ * be attached simulataneously. {0x7, 0} is equivalent to
+ * {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
+ * can be no simultaneous connections.
+ * @print_name An optional callback to override the method to print the
+ * name of the extcon device.
+ * @print_state An optional callback to override the method to print the
+ * status of the extcon device.
+ * @dev Device of this extcon. Do not provide at register-time.
+ * @state Attach/detach state of this extcon. Do not provide at
+ * register-time
+ * @nh Notifier for the state change events from this extcon
+ * @entry To support list of extcon devices so that uses can search
+ * for extcon devices based on the extcon name.
+ * @lock
+ * @max_supported Internal value to store the number of cables.
+ * @extcon_dev_type Device_type struct to provide attribute_groups
+ * customized for each extcon device.
+ * @cables Sysfs subdirectories. Each represents one cable.
+ *
+ * In most cases, users only need to provide "User initializing data" of
+ * this struct when registering an extcon. In some exceptional cases,
+ * optional callbacks may be needed. However, the values in "internal data"
+ * are overwritten by register function.
+ */
+struct extcon_dev {
+ /* --- Optional user initializing data --- */
+ const char *name;
+ const char **supported_cable;
+ const u32 *mutually_exclusive;
+
+ /* --- Optional callbacks to override class functions --- */
+ ssize_t (*print_name)(struct extcon_dev *edev, char *buf);
+ ssize_t (*print_state)(struct extcon_dev *edev, char *buf);
+
+ /* --- Internal data. Please do not set. --- */
+ struct device *dev;
+ u32 state;
+ struct raw_notifier_head nh;
+ struct list_head entry;
+ spinlock_t lock; /* could be called by irq handler */
+ int max_supported;
+
+ /* /sys/class/extcon/.../cable.n/... */
+ struct device_type extcon_dev_type;
+ struct extcon_cable *cables;
+ /* /sys/class/extcon/.../mutually_exclusive/... */
+ struct attribute_group attr_g_muex;
+ struct attribute **attrs_muex;
+ struct device_attribute *d_attrs_muex;
+};
+
+/**
+ * struct extcon_cable - An internal data for each cable of extcon device.
+ * @edev The extcon device
+ * @cable_index Index of this cable in the edev
+ * @attr_g Attribute group for the cable
+ * @attr_name "name" sysfs entry
+ * @attr_state "state" sysfs entry
+ * @attrs Array pointing to attr_name and attr_state for attr_g
+ */
+struct extcon_cable {
+ struct extcon_dev *edev;
+ int cable_index;
+
+ struct attribute_group attr_g;
+ struct device_attribute attr_name;
+ struct device_attribute attr_state;
+
+ struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+};
+
+/**
+ * struct extcon_specific_cable_nb - An internal data for
+ * extcon_register_interest().
+ * @internal_nb a notifier block bridging extcon notifier and cable notifier.
+ * @user_nb user provided notifier block for events from a specific cable.
+ * @cable_index the target cable.
+ * @edev the target extcon device.
+ * @previous_value the saved previous event value.
+ */
+struct extcon_specific_cable_nb {
+ struct notifier_block internal_nb;
+ struct notifier_block *user_nb;
+ int cable_index;
+ struct extcon_dev *edev;
+ unsigned long previous_value;
+};
+
+#if IS_ENABLED(CONFIG_EXTCON)
+
+/*
+ * Following APIs are for notifiers or configurations.
+ * Notifiers are the external port and connection devices.
+ */
+extern int extcon_dev_register(struct extcon_dev *edev, struct device *dev);
+extern void extcon_dev_unregister(struct extcon_dev *edev);
+extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
+
+/*
+ * get/set/update_state access the 32b encoded state value, which represents
+ * states of all possible cables of the multistate port. For example, if one
+ * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
+ * are attached to the port.
+ */
+static inline u32 extcon_get_state(struct extcon_dev *edev)
+{
+ return edev->state;
+}
+
+extern int extcon_set_state(struct extcon_dev *edev, u32 state);
+extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
+
+/*
+ * get/set_cable_state access each bit of the 32b encoded state value.
+ * They are used to access the status of each cable based on the cable_name
+ * or cable_index, which is retrived by extcon_find_cable_index
+ */
+extern int extcon_find_cable_index(struct extcon_dev *sdev,
+ const char *cable_name);
+extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index);
+extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index,
+ bool cable_state);
+
+extern int extcon_get_cable_state(struct extcon_dev *edev,
+ const char *cable_name);
+extern int extcon_set_cable_state(struct extcon_dev *edev,
+ const char *cable_name, bool cable_state);
+
+/*
+ * Following APIs are for notifiees (those who want to be notified)
+ * to register a callback for events from a specific cable of the extcon.
+ * Notifiees are the connected device drivers wanting to get notified by
+ * a specific external port of a connection device.
+ */
+extern int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+ const char *extcon_name,
+ const char *cable_name,
+ struct notifier_block *nb);
+extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb);
+
+/*
+ * Following APIs are to monitor every action of a notifier.
+ * Registerer gets notified for every external port of a connection device.
+ * Probably this could be used to debug an action of notifier; however,
+ * we do not recommend to use this at normal 'notifiee' device drivers who
+ * want to be notified by a specific external port of the notifier.
+ */
+extern int extcon_register_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb);
+extern int extcon_unregister_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb);
+#else /* CONFIG_EXTCON */
+static inline int extcon_dev_register(struct extcon_dev *edev,
+ struct device *dev)
+{
+ return 0;
+}
+
+static inline void extcon_dev_unregister(struct extcon_dev *edev) { }
+
+static inline u32 extcon_get_state(struct extcon_dev *edev)
+{
+ return 0;
+}
+
+static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
+{
+ return 0;
+}
+
+static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
+ u32 state)
+{
+ return 0;
+}
+
+static inline int extcon_find_cable_index(struct extcon_dev *edev,
+ const char *cable_name)
+{
+ return 0;
+}
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev,
+ int cable_index)
+{
+ return 0;
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev,
+ int cable_index, bool cable_state)
+{
+ return 0;
+}
+
+static inline int extcon_get_cable_state(struct extcon_dev *edev,
+ const char *cable_name)
+{
+ return 0;
+}
+
+static inline int extcon_set_cable_state(struct extcon_dev *edev,
+ const char *cable_name, int state)
+{
+ return 0;
+}
+
+static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
+{
+ return NULL;
+}
+
+static inline int extcon_register_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int extcon_unregister_notifier(struct extcon_dev *edev,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int extcon_register_interest(struct extcon_specific_cable_nb *obj,
+ const char *extcon_name,
+ const char *cable_name,
+ struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
+ *obj)
+{
+ return 0;
+}
+#endif /* CONFIG_EXTCON */
+#endif /* __LINUX_EXTCON_H__ */
diff --git a/include/linux/extcon/extcon_gpio.h b/include/linux/extcon/extcon_gpio.h
new file mode 100644
index 000000000000..a2129b73dcb1
--- /dev/null
+++ b/include/linux/extcon/extcon_gpio.h
@@ -0,0 +1,52 @@
+/*
+ * External connector (extcon) class generic GPIO driver
+ *
+ * Copyright (C) 2012 Samsung Electronics
+ * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * based on switch class driver
+ * Copyright (C) 2008 Google, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+*/
+#ifndef __EXTCON_GPIO_H__
+#define __EXTCON_GPIO_H__ __FILE__
+
+#include <linux/extcon.h>
+
+/**
+ * struct gpio_extcon_platform_data - A simple GPIO-controlled extcon device.
+ * @name The name of this GPIO extcon device.
+ * @gpio Corresponding GPIO.
+ * @debounce Debounce time for GPIO IRQ in ms.
+ * @irq_flags IRQ Flags (e.g., IRQF_TRIGGER_LOW).
+ * @state_on print_state is overriden with state_on if attached. If Null,
+ * default method of extcon class is used.
+ * @state_off print_state is overriden with state_on if dettached. If Null,
+ * default method of extcon class is used.
+ *
+ * Note that in order for state_on or state_off to be valid, both state_on
+ * and state_off should be not NULL. If at least one of them is NULL,
+ * the print_state is not overriden.
+ */
+struct gpio_extcon_platform_data {
+ const char *name;
+ unsigned gpio;
+ unsigned long debounce;
+ unsigned long irq_flags;
+
+ /* if NULL, "0" or "1" will be printed */
+ const char *state_on;
+ const char *state_off;
+};
+
+#endif /* __EXTCON_GPIO_H__ */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 72090994d789..82b01357af8b 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -10,6 +10,7 @@
#ifdef __KERNEL__
#include <linux/atomic.h>
+#include <linux/compat.h>
#endif
/*
@@ -133,6 +134,16 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
#ifdef __KERNEL__
+#ifdef CONFIG_COMPAT
+/*
+ * A struct sock_filter is architecture independent.
+ */
+struct compat_sock_fprog {
+ u16 len;
+ compat_uptr_t filter; /* struct sock_filter * */
+};
+#endif
+
struct sk_buff;
struct sock;
@@ -233,6 +244,7 @@ enum {
BPF_S_ANC_RXHASH,
BPF_S_ANC_CPU,
BPF_S_ANC_ALU_XOR_X,
+ BPF_S_ANC_SECCOMP_LD_W,
};
#endif /* __KERNEL__ */
diff --git a/include/linux/firewire.h b/include/linux/firewire.h
index cdc9b719e9c7..e83c24af358a 100644
--- a/include/linux/firewire.h
+++ b/include/linux/firewire.h
@@ -135,6 +135,20 @@ struct fw_card {
__be32 maint_utility_register;
};
+static inline struct fw_card *fw_card_get(struct fw_card *card)
+{
+ kref_get(&card->kref);
+
+ return card;
+}
+
+void fw_card_release(struct kref *kref);
+
+static inline void fw_card_put(struct fw_card *card)
+{
+ kref_put(&card->kref, fw_card_release);
+}
+
struct fw_attribute_group {
struct attribute_group *groups[2];
struct attribute_group group;
@@ -325,6 +339,7 @@ int fw_core_add_address_handler(struct fw_address_handler *handler,
void fw_core_remove_address_handler(struct fw_address_handler *handler);
void fw_send_response(struct fw_card *card,
struct fw_request *request, int rcode);
+int fw_get_request_speed(struct fw_request *request);
void fw_send_request(struct fw_card *card, struct fw_transaction *t,
int tcode, int destination_id, int generation, int speed,
unsigned long long offset, void *payload, size_t length,
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 8de675523e46..25c40b9f848a 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2051,6 +2051,7 @@ extern void unregister_blkdev(unsigned int, const char *);
extern struct block_device *bdget(dev_t);
extern struct block_device *bdgrab(struct block_device *bdev);
extern void bd_set_size(struct block_device *, loff_t size);
+extern sector_t blkdev_max_block(struct block_device *bdev);
extern void bd_forget(struct inode *inode);
extern void bdput(struct block_device *);
extern void invalidate_bdev(struct block_device *);
diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h
index fffdf00f87b9..15be561e7397 100644
--- a/include/linux/fsl_devices.h
+++ b/include/linux/fsl_devices.h
@@ -6,7 +6,7 @@
*
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
- * Copyright 2004 Freescale Semiconductor, Inc
+ * Copyright 2004,2012 Freescale Semiconductor, Inc
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -17,6 +17,12 @@
#ifndef _FSL_DEVICE_H_
#define _FSL_DEVICE_H_
+#define FSL_UTMI_PHY_DLY 10 /*As per P1010RM, delay for UTMI
+ PHY CLK to become stable - 10ms*/
+#define FSL_USB_VER_OLD 0
+#define FSL_USB_VER_1_6 1
+#define FSL_USB_VER_2_2 2
+
#include <linux/types.h>
/*
@@ -63,6 +69,7 @@ struct platform_device;
struct fsl_usb2_platform_data {
/* board specific information */
+ int controller_ver;
enum fsl_usb2_operating_modes operating_mode;
enum fsl_usb2_phy_modes phy_mode;
unsigned int port_enables;
diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h
index 72a6cabb4d5b..55e6d63d46d0 100644
--- a/include/linux/ftrace.h
+++ b/include/linux/ftrace.h
@@ -286,10 +286,16 @@ struct ftrace_rec_iter *ftrace_rec_iter_start(void);
struct ftrace_rec_iter *ftrace_rec_iter_next(struct ftrace_rec_iter *iter);
struct dyn_ftrace *ftrace_rec_iter_record(struct ftrace_rec_iter *iter);
+#define for_ftrace_rec_iter(iter) \
+ for (iter = ftrace_rec_iter_start(); \
+ iter; \
+ iter = ftrace_rec_iter_next(iter))
+
+
int ftrace_update_record(struct dyn_ftrace *rec, int enable);
int ftrace_test_record(struct dyn_ftrace *rec, int enable);
void ftrace_run_stop_machine(int command);
-int ftrace_location(unsigned long ip);
+unsigned long ftrace_location(unsigned long ip);
extern ftrace_func_t ftrace_trace_function;
@@ -308,11 +314,14 @@ ftrace_set_early_filter(struct ftrace_ops *ops, char *buf, int enable);
/* defined in arch */
extern int ftrace_ip_converted(unsigned long ip);
extern int ftrace_dyn_arch_init(void *data);
+extern void ftrace_replace_code(int enable);
extern int ftrace_update_ftrace_func(ftrace_func_t func);
extern void ftrace_caller(void);
extern void ftrace_call(void);
extern void mcount_call(void);
+void ftrace_modify_all_code(int command);
+
#ifndef FTRACE_ADDR
#define FTRACE_ADDR ((unsigned long)ftrace_caller)
#endif
@@ -485,8 +494,12 @@ static inline void __ftrace_enabled_restore(int enabled)
extern void trace_preempt_on(unsigned long a0, unsigned long a1);
extern void trace_preempt_off(unsigned long a0, unsigned long a1);
#else
- static inline void trace_preempt_on(unsigned long a0, unsigned long a1) { }
- static inline void trace_preempt_off(unsigned long a0, unsigned long a1) { }
+/*
+ * Use defines instead of static inlines because some arches will make code out
+ * of the CALLER_ADDR, when we really want these to be a real nop.
+ */
+# define trace_preempt_on(a0, a1) do { } while (0)
+# define trace_preempt_off(a0, a1) do { } while (0)
#endif
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 5f3f3be5af09..176a939d1547 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -179,6 +179,7 @@ enum {
TRACE_EVENT_FL_RECORDED_CMD_BIT,
TRACE_EVENT_FL_CAP_ANY_BIT,
TRACE_EVENT_FL_NO_SET_FILTER_BIT,
+ TRACE_EVENT_FL_IGNORE_ENABLE_BIT,
};
enum {
@@ -187,6 +188,7 @@ enum {
TRACE_EVENT_FL_RECORDED_CMD = (1 << TRACE_EVENT_FL_RECORDED_CMD_BIT),
TRACE_EVENT_FL_CAP_ANY = (1 << TRACE_EVENT_FL_CAP_ANY_BIT),
TRACE_EVENT_FL_NO_SET_FILTER = (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT),
+ TRACE_EVENT_FL_IGNORE_ENABLE = (1 << TRACE_EVENT_FL_IGNORE_ENABLE_BIT),
};
struct ftrace_event_call {
diff --git a/include/linux/generic_serial.h b/include/linux/generic_serial.h
index fadff28505bb..79b3eb37243a 100644
--- a/include/linux/generic_serial.h
+++ b/include/linux/generic_serial.h
@@ -4,7 +4,6 @@
* Copyright (C) 1998 R.E.Wolff@BitWizard.nl
*
* written for the SX serial driver.
- * Contains the code that should be shared over all the serial drivers.
*
* Version 0.1 -- December, 1998.
*/
@@ -12,45 +11,8 @@
#ifndef GENERIC_SERIAL_H
#define GENERIC_SERIAL_H
-#ifdef __KERNEL__
-#include <linux/mutex.h>
-#include <linux/tty.h>
-
-struct real_driver {
- void (*disable_tx_interrupts) (void *);
- void (*enable_tx_interrupts) (void *);
- void (*disable_rx_interrupts) (void *);
- void (*enable_rx_interrupts) (void *);
- void (*shutdown_port) (void*);
- int (*set_real_termios) (void*);
- int (*chars_in_buffer) (void*);
- void (*close) (void*);
- void (*hungup) (void*);
- void (*getserial) (void*, struct serial_struct *sp);
-};
-
-
-
-struct gs_port {
- int magic;
- struct tty_port port;
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- struct mutex port_write_mutex;
- unsigned long event;
- unsigned short closing_wait;
- int close_delay;
- struct real_driver *rd;
- int wakeup_chars;
- int baud_base;
- int baud;
- int custom_divisor;
- spinlock_t driver_lock;
-};
-
-#endif /* __KERNEL__ */
+#warning Use of this header is deprecated.
+#warning Since nobody sets the constants defined here for you, you should not, in any case, use them. Including the header is thus pointless.
/* Flags */
/* Warning: serial.h defines some ASYNC_ flags, they say they are "only"
@@ -60,8 +22,6 @@ struct gs_port {
#define GS_RX_INTEN 0x00400000
#define GS_ACTIVE 0x00200000
-
-
#define GS_TYPE_NORMAL 1
#define GS_DEBUG_FLUSH 0x00000001
@@ -72,24 +32,4 @@ struct gs_port {
#define GS_DEBUG_FLOW 0x00000020
#define GS_DEBUG_WRITE 0x00000040
-#ifdef __KERNEL__
-int gs_put_char(struct tty_struct *tty, unsigned char ch);
-int gs_write(struct tty_struct *tty,
- const unsigned char *buf, int count);
-int gs_write_room(struct tty_struct *tty);
-int gs_chars_in_buffer(struct tty_struct *tty);
-void gs_flush_buffer(struct tty_struct *tty);
-void gs_flush_chars(struct tty_struct *tty);
-void gs_stop(struct tty_struct *tty);
-void gs_start(struct tty_struct *tty);
-void gs_hangup(struct tty_struct *tty);
-int gs_block_til_ready(void *port, struct file *filp);
-void gs_close(struct tty_struct *tty, struct file *filp);
-void gs_set_termios (struct tty_struct * tty,
- struct ktermios * old_termios);
-int gs_init_port(struct gs_port *port);
-int gs_setserial(struct gs_port *port, struct serial_struct __user *sp);
-int gs_getserial(struct gs_port *port, struct serial_struct __user *sp);
-void gs_got_break(struct gs_port *port);
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e61d3192448e..017a7fb5a1fc 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -222,12 +222,6 @@ static inline void part_pack_uuid(const u8 *uuid_str, u8 *to)
}
}
-static inline char *part_unpack_uuid(const u8 *uuid, char *out)
-{
- sprintf(out, "%pU", uuid);
- return out;
-}
-
static inline int disk_max_parts(struct gendisk *disk)
{
if (disk->flags & GENHD_FL_EXT_DEVT)
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 3a95da60fd3e..449fa385703d 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -317,7 +317,6 @@ struct hid_item {
#define HID_QUIRK_BADPAD 0x00000020
#define HID_QUIRK_MULTI_INPUT 0x00000040
#define HID_QUIRK_HIDINPUT_FORCE 0x00000080
-#define HID_QUIRK_MULTITOUCH 0x00000100
#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00010000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
#define HID_QUIRK_NO_INIT_REPORTS 0x20000000
@@ -325,6 +324,12 @@ struct hid_item {
#define HID_QUIRK_NO_INPUT_SYNC 0x80000000
/*
+ * HID device groups
+ */
+#define HID_GROUP_GENERIC 0x0001
+#define HID_GROUP_MULTITOUCH 0x0002
+
+/*
* This is the global environment of the parser. This information is
* persistent for main-items. The global environment can be saved and
* restored with PUSH/POP statements.
@@ -467,6 +472,8 @@ struct hid_driver;
struct hid_ll_driver;
struct hid_device { /* device report descriptor */
+ __u8 *dev_rdesc;
+ unsigned dev_rsize;
__u8 *rdesc;
unsigned rsize;
struct hid_collection *collection; /* List of HID collections */
@@ -474,6 +481,7 @@ struct hid_device { /* device report descriptor */
unsigned maxcollection; /* Number of parsed collections */
unsigned maxapplication; /* Number of applications */
__u16 bus; /* BUS ID */
+ __u16 group; /* Report group */
__u32 vendor; /* Vendor ID */
__u32 product; /* Product ID */
__u32 version; /* HID version */
@@ -578,12 +586,12 @@ struct hid_descriptor {
struct hid_class_descriptor desc[1];
} __attribute__ ((packed));
-#define HID_DEVICE(b, ven, prod) \
- .bus = (b), \
- .vendor = (ven), .product = (prod)
-
-#define HID_USB_DEVICE(ven, prod) HID_DEVICE(BUS_USB, ven, prod)
-#define HID_BLUETOOTH_DEVICE(ven, prod) HID_DEVICE(BUS_BLUETOOTH, ven, prod)
+#define HID_DEVICE(b, g, ven, prod) \
+ .bus = (b), .group = (g), .vendor = (ven), .product = (prod)
+#define HID_USB_DEVICE(ven, prod) \
+ .bus = BUS_USB, .vendor = (ven), .product = (prod)
+#define HID_BLUETOOTH_DEVICE(ven, prod) \
+ .bus = BUS_BLUETOOTH, .vendor = (ven), .product = (prod)
#define HID_REPORT_ID(rep) \
.report_type = (rep)
@@ -735,6 +743,7 @@ void hid_output_report(struct hid_report *report, __u8 *data);
struct hid_device *hid_allocate_device(void);
struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
int hid_parse_report(struct hid_device *hid, __u8 *start, unsigned size);
+int hid_open_report(struct hid_device *device);
int hid_check_keys_pressed(struct hid_device *hid);
int hid_connect(struct hid_device *hid, unsigned int connect_mask);
void hid_disconnect(struct hid_device *hid);
@@ -805,16 +814,7 @@ static inline void hid_map_usage_clear(struct hid_input *hidinput,
*/
static inline int __must_check hid_parse(struct hid_device *hdev)
{
- int ret;
-
- if (hdev->status & HID_STAT_PARSED)
- return 0;
-
- ret = hdev->ll_driver->parse(hdev);
- if (!ret)
- hdev->status |= HID_STAT_PARSED;
-
- return ret;
+ return hid_open_report(hdev);
}
/**
@@ -896,7 +896,7 @@ static inline int hid_hw_power(struct hid_device *hdev, int level)
return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0;
}
-void hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
+int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size,
int interrupt);
extern int hid_generic_init(void);
diff --git a/include/linux/hidraw.h b/include/linux/hidraw.h
index 4b88e697c4e9..45e9fcb8d877 100644
--- a/include/linux/hidraw.h
+++ b/include/linux/hidraw.h
@@ -76,13 +76,13 @@ struct hidraw_list {
#ifdef CONFIG_HIDRAW
int hidraw_init(void);
void hidraw_exit(void);
-void hidraw_report_event(struct hid_device *, u8 *, int);
+int hidraw_report_event(struct hid_device *, u8 *, int);
int hidraw_connect(struct hid_device *);
void hidraw_disconnect(struct hid_device *);
#else
static inline int hidraw_init(void) { return 0; }
static inline void hidraw_exit(void) { }
-static inline void hidraw_report_event(struct hid_device *hid, u8 *data, int len) { }
+static inline int hidraw_report_event(struct hid_device *hid, u8 *data, int len) { return 0; }
static inline int hidraw_connect(struct hid_device *hid) { return -1; }
static inline void hidraw_disconnect(struct hid_device *hid) { }
#endif
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 6af8738ae7e9..68ed7f7e1fc9 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1062,8 +1062,10 @@ struct hyperv_service_callback {
void (*callback) (void *context);
};
+#define MAX_SRV_VER 0x7ffffff
extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
- struct icmsg_negotiate *, u8 *);
+ struct icmsg_negotiate *, u8 *, int,
+ int);
int hv_kvp_init(struct hv_util_service *);
void hv_kvp_deinit(void);
diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h
index a87124d4d533..1bc74afe7a35 100644
--- a/include/linux/i2c-pnx.h
+++ b/include/linux/i2c-pnx.h
@@ -29,14 +29,10 @@ struct i2c_pnx_algo_data {
struct i2c_pnx_mif mif;
int last;
struct clk *clk;
- struct i2c_pnx_data *i2c_pnx;
struct i2c_adapter adapter;
-};
-
-struct i2c_pnx_data {
- const char *name;
- u32 base;
- int irq;
+ phys_addr_t base;
+ int irq;
+ u32 timeout;
};
#endif /* __I2C_PNX_H__ */
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 1f90de0cfdbe..3993477103a5 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -171,8 +171,6 @@ static inline int twl_class_is_ ##class(void) \
TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
-#define TWL6025_SUBCLASS BIT(4) /* TWL6025 has changed registers */
-
/*
* Read and write single 8-bit registers
*/
@@ -746,6 +744,17 @@ struct twl_regulator_driver_data {
void *data;
unsigned long features;
};
+/* chip-specific feature flags, for twl_regulator_driver_data.features */
+#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
+#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
+#define TWL5031 BIT(2) /* twl5031 has different registers */
+#define TWL6030_CLASS BIT(3) /* TWL6030 class */
+#define TWL6025_SUBCLASS BIT(4) /* TWL6025 has changed registers */
+#define TWL4030_ALLOW_UNSUPPORTED BIT(5) /* Some voltages are possible
+ * but not officially supported.
+ * This flag is necessary to
+ * enable them.
+ */
/*----------------------------------------------------------------------*/
diff --git a/include/linux/if_ec.h b/include/linux/if_ec.h
deleted file mode 100644
index d85f9f48129f..000000000000
--- a/include/linux/if_ec.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/* Definitions for Econet sockets. */
-
-#ifndef __LINUX_IF_EC
-#define __LINUX_IF_EC
-
-/* User visible stuff. Glibc provides its own but libc5 folk will use these */
-
-struct ec_addr {
- unsigned char station; /* Station number. */
- unsigned char net; /* Network number. */
-};
-
-struct sockaddr_ec {
- unsigned short sec_family;
- unsigned char port; /* Port number. */
- unsigned char cb; /* Control/flag byte. */
- unsigned char type; /* Type of message. */
- struct ec_addr addr;
- unsigned long cookie;
-};
-
-#define ECTYPE_PACKET_RECEIVED 0 /* Packet received */
-#define ECTYPE_TRANSMIT_STATUS 0x10 /* Transmit completed,
- low nibble holds status */
-
-#define ECTYPE_TRANSMIT_OK 1
-#define ECTYPE_TRANSMIT_NOT_LISTENING 2
-#define ECTYPE_TRANSMIT_NET_ERROR 3
-#define ECTYPE_TRANSMIT_NO_CLOCK 4
-#define ECTYPE_TRANSMIT_LINE_JAMMED 5
-#define ECTYPE_TRANSMIT_NOT_PRESENT 6
-
-#ifdef __KERNEL__
-
-#define EC_HLEN 6
-
-/* This is what an Econet frame looks like on the wire. */
-struct ec_framehdr {
- unsigned char dst_stn;
- unsigned char dst_net;
- unsigned char src_stn;
- unsigned char src_net;
- unsigned char cb;
- unsigned char port;
-};
-
-struct econet_sock {
- /* struct sock has to be the first member of econet_sock */
- struct sock sk;
- unsigned char cb;
- unsigned char port;
- unsigned char station;
- unsigned char net;
- unsigned short num;
-};
-
-static inline struct econet_sock *ec_sk(const struct sock *sk)
-{
- return (struct econet_sock *)sk;
-}
-
-struct ec_device {
- unsigned char station, net; /* Econet protocol address */
-};
-
-#endif
-
-#endif
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
new file mode 100644
index 000000000000..fb0fe46fd659
--- /dev/null
+++ b/include/linux/iio/buffer.h
@@ -0,0 +1,191 @@
+/* The industrial I/O core - generic buffer interfaces.
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_BUFFER_GENERIC_H_
+#define _IIO_BUFFER_GENERIC_H_
+#include <linux/sysfs.h>
+#include <linux/iio/iio.h>
+
+#ifdef CONFIG_IIO_BUFFER
+
+struct iio_buffer;
+
+/**
+ * struct iio_buffer_access_funcs - access functions for buffers.
+ * @store_to: actually store stuff to the buffer
+ * @read_first_n: try to get a specified number of bytes (must exist)
+ * @request_update: if a parameter change has been marked, update underlying
+ * storage.
+ * @get_bytes_per_datum:get current bytes per datum
+ * @set_bytes_per_datum:set number of bytes per datum
+ * @get_length: get number of datums in buffer
+ * @set_length: set number of datums in buffer
+ *
+ * The purpose of this structure is to make the buffer element
+ * modular as event for a given driver, different usecases may require
+ * different buffer designs (space efficiency vs speed for example).
+ *
+ * It is worth noting that a given buffer implementation may only support a
+ * small proportion of these functions. The core code 'should' cope fine with
+ * any of them not existing.
+ **/
+struct iio_buffer_access_funcs {
+ int (*store_to)(struct iio_buffer *buffer, u8 *data, s64 timestamp);
+ int (*read_first_n)(struct iio_buffer *buffer,
+ size_t n,
+ char __user *buf);
+
+ int (*request_update)(struct iio_buffer *buffer);
+
+ int (*get_bytes_per_datum)(struct iio_buffer *buffer);
+ int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
+ int (*get_length)(struct iio_buffer *buffer);
+ int (*set_length)(struct iio_buffer *buffer, int length);
+};
+
+/**
+ * struct iio_buffer - general buffer structure
+ * @length: [DEVICE] number of datums in buffer
+ * @bytes_per_datum: [DEVICE] size of individual datum including timestamp
+ * @scan_el_attrs: [DRIVER] control of scan elements if that scan mode
+ * control method is used
+ * @scan_mask: [INTERN] bitmask used in masking scan mode elements
+ * @scan_timestamp: [INTERN] does the scan mode include a timestamp
+ * @access: [DRIVER] buffer access functions associated with the
+ * implementation.
+ * @scan_el_dev_attr_list:[INTERN] list of scan element related attributes.
+ * @scan_el_group: [DRIVER] attribute group for those attributes not
+ * created from the iio_chan_info array.
+ * @pollq: [INTERN] wait queue to allow for polling on the buffer.
+ * @stufftoread: [INTERN] flag to indicate new data.
+ * @demux_list: [INTERN] list of operations required to demux the scan.
+ * @demux_bounce: [INTERN] buffer for doing gather from incoming scan.
+ **/
+struct iio_buffer {
+ int length;
+ int bytes_per_datum;
+ struct attribute_group *scan_el_attrs;
+ long *scan_mask;
+ bool scan_timestamp;
+ const struct iio_buffer_access_funcs *access;
+ struct list_head scan_el_dev_attr_list;
+ struct attribute_group scan_el_group;
+ wait_queue_head_t pollq;
+ bool stufftoread;
+ const struct attribute_group *attrs;
+ struct list_head demux_list;
+ unsigned char *demux_bounce;
+};
+
+/**
+ * iio_buffer_init() - Initialize the buffer structure
+ * @buffer: buffer to be initialized
+ **/
+void iio_buffer_init(struct iio_buffer *buffer);
+
+/**
+ * __iio_update_buffer() - update common elements of buffers
+ * @buffer: buffer that is the event source
+ * @bytes_per_datum: size of individual datum including timestamp
+ * @length: number of datums in buffer
+ **/
+static inline void __iio_update_buffer(struct iio_buffer *buffer,
+ int bytes_per_datum, int length)
+{
+ buffer->bytes_per_datum = bytes_per_datum;
+ buffer->length = length;
+}
+
+int iio_scan_mask_query(struct iio_dev *indio_dev,
+ struct iio_buffer *buffer, int bit);
+
+/**
+ * iio_scan_mask_set() - set particular bit in the scan mask
+ * @buffer: the buffer whose scan mask we are interested in
+ * @bit: the bit to be set.
+ **/
+int iio_scan_mask_set(struct iio_dev *indio_dev,
+ struct iio_buffer *buffer, int bit);
+
+/**
+ * iio_push_to_buffer() - push to a registered buffer.
+ * @buffer: IIO buffer structure for device
+ * @scan: Full scan.
+ * @timestamp:
+ */
+int iio_push_to_buffer(struct iio_buffer *buffer, unsigned char *data,
+ s64 timestamp);
+
+int iio_update_demux(struct iio_dev *indio_dev);
+
+/**
+ * iio_buffer_register() - register the buffer with IIO core
+ * @indio_dev: device with the buffer to be registered
+ **/
+int iio_buffer_register(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *channels,
+ int num_channels);
+
+/**
+ * iio_buffer_unregister() - unregister the buffer from IIO core
+ * @indio_dev: the device with the buffer to be unregistered
+ **/
+void iio_buffer_unregister(struct iio_dev *indio_dev);
+
+/**
+ * iio_buffer_read_length() - attr func to get number of datums in the buffer
+ **/
+ssize_t iio_buffer_read_length(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+/**
+ * iio_buffer_write_length() - attr func to set number of datums in the buffer
+ **/
+ssize_t iio_buffer_write_length(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len);
+/**
+ * iio_buffer_store_enable() - attr to turn the buffer on
+ **/
+ssize_t iio_buffer_store_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len);
+/**
+ * iio_buffer_show_enable() - attr to see if the buffer is on
+ **/
+ssize_t iio_buffer_show_enable(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+#define IIO_BUFFER_LENGTH_ATTR DEVICE_ATTR(length, S_IRUGO | S_IWUSR, \
+ iio_buffer_read_length, \
+ iio_buffer_write_length)
+
+#define IIO_BUFFER_ENABLE_ATTR DEVICE_ATTR(enable, S_IRUGO | S_IWUSR, \
+ iio_buffer_show_enable, \
+ iio_buffer_store_enable)
+
+int iio_sw_buffer_preenable(struct iio_dev *indio_dev);
+
+#else /* CONFIG_IIO_BUFFER */
+
+static inline int iio_buffer_register(struct iio_dev *indio_dev,
+ struct iio_chan_spec *channels,
+ int num_channels)
+{
+ return 0;
+}
+
+static inline void iio_buffer_unregister(struct iio_dev *indio_dev)
+{};
+
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* _IIO_BUFFER_GENERIC_H_ */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
new file mode 100644
index 000000000000..1a15e560a5a1
--- /dev/null
+++ b/include/linux/iio/consumer.h
@@ -0,0 +1,96 @@
+/*
+ * Industrial I/O in kernel consumer interface
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _IIO_INKERN_CONSUMER_H_
+#define _IIO_INKERN_CONSUMER_H
+#include <linux/iio/types.h>
+
+struct iio_dev;
+struct iio_chan_spec;
+
+/**
+ * struct iio_channel - everything needed for a consumer to use a channel
+ * @indio_dev: Device on which the channel exists.
+ * @channel: Full description of the channel.
+ */
+struct iio_channel {
+ struct iio_dev *indio_dev;
+ const struct iio_chan_spec *channel;
+};
+
+/**
+ * iio_channel_get() - get description of all that is needed to access channel.
+ * @name: Unique name of the device as provided in the iio_map
+ * with which the desired provider to consumer mapping
+ * was registered.
+ * @consumer_channel: Unique name to identify the channel on the consumer
+ * side. This typically describes the channels use within
+ * the consumer. E.g. 'battery_voltage'
+ */
+struct iio_channel *iio_st_channel_get(const char *name,
+ const char *consumer_channel);
+
+/**
+ * iio_st_channel_release() - release channels obtained via iio_st_channel_get
+ * @chan: The channel to be released.
+ */
+void iio_st_channel_release(struct iio_channel *chan);
+
+/**
+ * iio_st_channel_get_all() - get all channels associated with a client
+ * @name: name of consumer device.
+ *
+ * Returns an array of iio_channel structures terminated with one with
+ * null iio_dev pointer.
+ * This function is used by fairly generic consumers to get all the
+ * channels registered as having this consumer.
+ */
+struct iio_channel *iio_st_channel_get_all(const char *name);
+
+/**
+ * iio_st_channel_release_all() - reverse iio_st_get_all
+ * @chan: Array of channels to be released.
+ */
+void iio_st_channel_release_all(struct iio_channel *chan);
+
+/**
+ * iio_st_read_channel_raw() - read from a given channel
+ * @channel: The channel being queried.
+ * @val: Value read back.
+ *
+ * Note raw reads from iio channels are in adc counts and hence
+ * scale will need to be applied if standard units required.
+ */
+int iio_st_read_channel_raw(struct iio_channel *chan,
+ int *val);
+
+/**
+ * iio_st_get_channel_type() - get the type of a channel
+ * @channel: The channel being queried.
+ * @type: The type of the channel.
+ *
+ * returns the enum iio_chan_type of the channel
+ */
+int iio_st_get_channel_type(struct iio_channel *channel,
+ enum iio_chan_type *type);
+
+/**
+ * iio_st_read_channel_scale() - read the scale value for a channel
+ * @channel: The channel being queried.
+ * @val: First part of value read back.
+ * @val2: Second part of value read back.
+ *
+ * Note returns a description of what is in val and val2, such
+ * as IIO_VAL_INT_PLUS_MICRO telling us we have a value of val
+ * + val2/1e6
+ */
+int iio_st_read_channel_scale(struct iio_channel *chan, int *val,
+ int *val2);
+
+#endif
diff --git a/include/linux/iio/driver.h b/include/linux/iio/driver.h
new file mode 100644
index 000000000000..a4f8b2e05af5
--- /dev/null
+++ b/include/linux/iio/driver.h
@@ -0,0 +1,34 @@
+/*
+ * Industrial I/O in kernel access map interface.
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_INKERN_H_
+#define _IIO_INKERN_H_
+
+struct iio_map;
+
+/**
+ * iio_map_array_register() - tell the core about inkernel consumers
+ * @indio_dev: provider device
+ * @map: array of mappings specifying association of channel with client
+ */
+int iio_map_array_register(struct iio_dev *indio_dev,
+ struct iio_map *map);
+
+/**
+ * iio_map_array_unregister() - tell the core to remove consumer mappings
+ * @indio_dev: provider device
+ * @map: array of mappings to remove. Note these must have same memory
+ * addresses as those originally added not just equal parameter
+ * values.
+ */
+int iio_map_array_unregister(struct iio_dev *indio_dev,
+ struct iio_map *map);
+
+#endif
diff --git a/include/linux/iio/events.h b/include/linux/iio/events.h
new file mode 100644
index 000000000000..b5acbf93c5da
--- /dev/null
+++ b/include/linux/iio/events.h
@@ -0,0 +1,105 @@
+/* The industrial I/O - event passing to userspace
+ *
+ * Copyright (c) 2008-2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _IIO_EVENTS_H_
+#define _IIO_EVENTS_H_
+
+#include <linux/ioctl.h>
+#include <linux/types.h>
+#include <linux/iio/types.h>
+
+/**
+ * struct iio_event_data - The actual event being pushed to userspace
+ * @id: event identifier
+ * @timestamp: best estimate of time of event occurrence (often from
+ * the interrupt handler)
+ */
+struct iio_event_data {
+ __u64 id;
+ __s64 timestamp;
+};
+
+#define IIO_GET_EVENT_FD_IOCTL _IOR('i', 0x90, int)
+
+enum iio_event_type {
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_TYPE_MAG,
+ IIO_EV_TYPE_ROC,
+ IIO_EV_TYPE_THRESH_ADAPTIVE,
+ IIO_EV_TYPE_MAG_ADAPTIVE,
+};
+
+enum iio_event_direction {
+ IIO_EV_DIR_EITHER,
+ IIO_EV_DIR_RISING,
+ IIO_EV_DIR_FALLING,
+};
+
+/**
+ * IIO_EVENT_CODE() - create event identifier
+ * @chan_type: Type of the channel. Should be one of enum iio_chan_type.
+ * @diff: Whether the event is for an differential channel or not.
+ * @modifier: Modifier for the channel. Should be one of enum iio_modifier.
+ * @direction: Direction of the event. One of enum iio_event_direction.
+ * @type: Type of the event. Should be one enum iio_event_type.
+ * @chan: Channel number for non-differential channels.
+ * @chan1: First channel number for differential channels.
+ * @chan2: Second channel number for differential channels.
+ */
+
+#define IIO_EVENT_CODE(chan_type, diff, modifier, direction, \
+ type, chan, chan1, chan2) \
+ (((u64)type << 56) | ((u64)diff << 55) | \
+ ((u64)direction << 48) | ((u64)modifier << 40) | \
+ ((u64)chan_type << 32) | (((u16)chan2) << 16) | ((u16)chan1) | \
+ ((u16)chan))
+
+
+#define IIO_EV_DIR_MAX 4
+#define IIO_EV_BIT(type, direction) \
+ (1 << (type*IIO_EV_DIR_MAX + direction))
+
+/**
+ * IIO_MOD_EVENT_CODE() - create event identifier for modified channels
+ * @chan_type: Type of the channel. Should be one of enum iio_chan_type.
+ * @number: Channel number.
+ * @modifier: Modifier for the channel. Should be one of enum iio_modifier.
+ * @type: Type of the event. Should be one enum iio_event_type.
+ * @direction: Direction of the event. One of enum iio_event_direction.
+ */
+
+#define IIO_MOD_EVENT_CODE(chan_type, number, modifier, \
+ type, direction) \
+ IIO_EVENT_CODE(chan_type, 0, modifier, direction, type, number, 0, 0)
+
+/**
+ * IIO_UNMOD_EVENT_CODE() - create event identifier for unmodified channels
+ * @chan_type: Type of the channel. Should be one of enum iio_chan_type.
+ * @number: Channel number.
+ * @type: Type of the event. Should be one enum iio_event_type.
+ * @direction: Direction of the event. One of enum iio_event_direction.
+ */
+
+#define IIO_UNMOD_EVENT_CODE(chan_type, number, type, direction) \
+ IIO_EVENT_CODE(chan_type, 0, 0, direction, type, number, 0, 0)
+
+#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF)
+
+#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF)
+
+#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF)
+
+/* Event code number extraction depends on which type of event we have.
+ * Perhaps review this function in the future*/
+#define IIO_EVENT_CODE_EXTRACT_CHAN(mask) ((__s16)(mask & 0xFFFF))
+#define IIO_EVENT_CODE_EXTRACT_CHAN2(mask) ((__s16)(((mask) >> 16) & 0xFFFF))
+
+#define IIO_EVENT_CODE_EXTRACT_MODIFIER(mask) ((mask >> 40) & 0xFF)
+#define IIO_EVENT_CODE_EXTRACT_DIFF(mask) (((mask) >> 55) & 0x1)
+
+#endif
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
new file mode 100644
index 000000000000..3a4f6a3ab80d
--- /dev/null
+++ b/include/linux/iio/iio.h
@@ -0,0 +1,492 @@
+
+/* The industrial I/O core
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#ifndef _INDUSTRIAL_IO_H_
+#define _INDUSTRIAL_IO_H_
+
+#include <linux/device.h>
+#include <linux/cdev.h>
+#include <linux/iio/types.h>
+/* IIO TODO LIST */
+/*
+ * Provide means of adjusting timer accuracy.
+ * Currently assumes nano seconds.
+ */
+
+enum iio_chan_info_enum {
+ IIO_CHAN_INFO_RAW = 0,
+ IIO_CHAN_INFO_PROCESSED,
+ IIO_CHAN_INFO_SCALE,
+ IIO_CHAN_INFO_OFFSET,
+ IIO_CHAN_INFO_CALIBSCALE,
+ IIO_CHAN_INFO_CALIBBIAS,
+ IIO_CHAN_INFO_PEAK,
+ IIO_CHAN_INFO_PEAK_SCALE,
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
+ IIO_CHAN_INFO_AVERAGE_RAW,
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
+ IIO_CHAN_INFO_SAMP_FREQ,
+ IIO_CHAN_INFO_FREQUENCY,
+ IIO_CHAN_INFO_PHASE,
+ IIO_CHAN_INFO_HARDWAREGAIN,
+};
+
+#define IIO_CHAN_INFO_SHARED_BIT(type) BIT(type*2)
+#define IIO_CHAN_INFO_SEPARATE_BIT(type) BIT(type*2 + 1)
+
+#define IIO_CHAN_INFO_RAW_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_RAW)
+#define IIO_CHAN_INFO_PROCESSED_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PROCESSED)
+#define IIO_CHAN_INFO_SCALE_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SCALE)
+#define IIO_CHAN_INFO_SCALE_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SCALE)
+#define IIO_CHAN_INFO_OFFSET_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_OFFSET)
+#define IIO_CHAN_INFO_OFFSET_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_OFFSET)
+#define IIO_CHAN_INFO_CALIBSCALE_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBSCALE)
+#define IIO_CHAN_INFO_CALIBSCALE_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBSCALE)
+#define IIO_CHAN_INFO_CALIBBIAS_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_CALIBBIAS)
+#define IIO_CHAN_INFO_CALIBBIAS_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_CALIBBIAS)
+#define IIO_CHAN_INFO_PEAK_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAK)
+#define IIO_CHAN_INFO_PEAK_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAK)
+#define IIO_CHAN_INFO_PEAKSCALE_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PEAKSCALE)
+#define IIO_CHAN_INFO_PEAKSCALE_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PEAKSCALE)
+#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT( \
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW)
+#define IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT( \
+ IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW)
+#define IIO_CHAN_INFO_AVERAGE_RAW_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_AVERAGE_RAW)
+#define IIO_CHAN_INFO_AVERAGE_RAW_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_AVERAGE_RAW)
+#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT( \
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
+#define IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT( \
+ IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY)
+#define IIO_CHAN_INFO_SAMP_FREQ_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_SAMP_FREQ)
+#define IIO_CHAN_INFO_SAMP_FREQ_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_SAMP_FREQ)
+#define IIO_CHAN_INFO_FREQUENCY_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_FREQUENCY)
+#define IIO_CHAN_INFO_FREQUENCY_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_FREQUENCY)
+#define IIO_CHAN_INFO_PHASE_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_PHASE)
+#define IIO_CHAN_INFO_PHASE_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_PHASE)
+#define IIO_CHAN_INFO_HARDWAREGAIN_SEPARATE_BIT \
+ IIO_CHAN_INFO_SEPARATE_BIT(IIO_CHAN_INFO_HARDWAREGAIN)
+#define IIO_CHAN_INFO_HARDWAREGAIN_SHARED_BIT \
+ IIO_CHAN_INFO_SHARED_BIT(IIO_CHAN_INFO_HARDWAREGAIN)
+
+enum iio_endian {
+ IIO_CPU,
+ IIO_BE,
+ IIO_LE,
+};
+
+struct iio_chan_spec;
+struct iio_dev;
+
+/**
+ * struct iio_chan_spec_ext_info - Extended channel info attribute
+ * @name: Info attribute name
+ * @shared: Whether this attribute is shared between all channels.
+ * @read: Read callback for this info attribute, may be NULL.
+ * @write: Write callback for this info attribute, may be NULL.
+ * @private: Data private to the driver.
+ */
+struct iio_chan_spec_ext_info {
+ const char *name;
+ bool shared;
+ ssize_t (*read)(struct iio_dev *, uintptr_t private,
+ struct iio_chan_spec const *, char *buf);
+ ssize_t (*write)(struct iio_dev *, uintptr_t private,
+ struct iio_chan_spec const *, const char *buf,
+ size_t len);
+ uintptr_t private;
+};
+
+/**
+ * struct iio_chan_spec - specification of a single channel
+ * @type: What type of measurement is the channel making.
+ * @channel: What number or name do we wish to assign the channel.
+ * @channel2: If there is a second number for a differential
+ * channel then this is it. If modified is set then the
+ * value here specifies the modifier.
+ * @address: Driver specific identifier.
+ * @scan_index: Monotonic index to give ordering in scans when read
+ * from a buffer.
+ * @scan_type: Sign: 's' or 'u' to specify signed or unsigned
+ * realbits: Number of valid bits of data
+ * storage_bits: Realbits + padding
+ * shift: Shift right by this before masking out
+ * realbits.
+ * endianness: little or big endian
+ * @info_mask: What information is to be exported about this channel.
+ * This includes calibbias, scale etc.
+ * @event_mask: What events can this channel produce.
+ * @ext_info: Array of extended info attributes for this channel.
+ * The array is NULL terminated, the last element should
+ * have it's name field set to NULL.
+ * @extend_name: Allows labeling of channel attributes with an
+ * informative name. Note this has no effect codes etc,
+ * unlike modifiers.
+ * @datasheet_name: A name used in in kernel mapping of channels. It should
+ * correspond to the first name that the channel is referred
+ * to by in the datasheet (e.g. IND), or the nearest
+ * possible compound name (e.g. IND-INC).
+ * @modified: Does a modifier apply to this channel. What these are
+ * depends on the channel type. Modifier is set in
+ * channel2. Examples are IIO_MOD_X for axial sensors about
+ * the 'x' axis.
+ * @indexed: Specify the channel has a numerical index. If not,
+ * the value in channel will be suppressed for attribute
+ * but not for event codes. Typically set it to 0 when
+ * the index is false.
+ * @differential: Channel is differential.
+ */
+struct iio_chan_spec {
+ enum iio_chan_type type;
+ int channel;
+ int channel2;
+ unsigned long address;
+ int scan_index;
+ struct {
+ char sign;
+ u8 realbits;
+ u8 storagebits;
+ u8 shift;
+ enum iio_endian endianness;
+ } scan_type;
+ long info_mask;
+ long event_mask;
+ const struct iio_chan_spec_ext_info *ext_info;
+ const char *extend_name;
+ const char *datasheet_name;
+ unsigned modified:1;
+ unsigned indexed:1;
+ unsigned output:1;
+ unsigned differential:1;
+};
+
+#define IIO_ST(si, rb, sb, sh) \
+ { .sign = si, .realbits = rb, .storagebits = sb, .shift = sh }
+
+#define IIO_CHAN_SOFT_TIMESTAMP(_si) \
+ { .type = IIO_TIMESTAMP, .channel = -1, \
+ .scan_index = _si, .scan_type = IIO_ST('s', 64, 64, 0) }
+
+/**
+ * iio_get_time_ns() - utility function to get a time stamp for events etc
+ **/
+static inline s64 iio_get_time_ns(void)
+{
+ struct timespec ts;
+ /*
+ * calls getnstimeofday.
+ * If hrtimers then up to ns accurate, if not microsecond.
+ */
+ ktime_get_real_ts(&ts);
+
+ return timespec_to_ns(&ts);
+}
+
+/* Device operating modes */
+#define INDIO_DIRECT_MODE 0x01
+#define INDIO_BUFFER_TRIGGERED 0x02
+#define INDIO_BUFFER_HARDWARE 0x08
+
+#define INDIO_ALL_BUFFER_MODES \
+ (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE)
+
+struct iio_trigger; /* forward declaration */
+struct iio_dev;
+
+/**
+ * struct iio_info - constant information about device
+ * @driver_module: module structure used to ensure correct
+ * ownership of chrdevs etc
+ * @event_attrs: event control attributes
+ * @attrs: general purpose device attributes
+ * @read_raw: function to request a value from the device.
+ * mask specifies which value. Note 0 means a reading of
+ * the channel in question. Return value will specify the
+ * type of value returned by the device. val and val2 will
+ * contain the elements making up the returned value.
+ * @write_raw: function to write a value to the device.
+ * Parameters are the same as for read_raw.
+ * @write_raw_get_fmt: callback function to query the expected
+ * format/precision. If not set by the driver, write_raw
+ * returns IIO_VAL_INT_PLUS_MICRO.
+ * @read_event_config: find out if the event is enabled.
+ * @write_event_config: set if the event is enabled.
+ * @read_event_value: read a value associated with the event. Meaning
+ * is event dependant. event_code specifies which event.
+ * @write_event_value: write the value associated with the event.
+ * Meaning is event dependent.
+ * @validate_trigger: function to validate the trigger when the
+ * current trigger gets changed.
+ **/
+struct iio_info {
+ struct module *driver_module;
+ struct attribute_group *event_attrs;
+ const struct attribute_group *attrs;
+
+ int (*read_raw)(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask);
+
+ int (*write_raw)(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int val,
+ int val2,
+ long mask);
+
+ int (*write_raw_get_fmt)(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask);
+
+ int (*read_event_config)(struct iio_dev *indio_dev,
+ u64 event_code);
+
+ int (*write_event_config)(struct iio_dev *indio_dev,
+ u64 event_code,
+ int state);
+
+ int (*read_event_value)(struct iio_dev *indio_dev,
+ u64 event_code,
+ int *val);
+ int (*write_event_value)(struct iio_dev *indio_dev,
+ u64 event_code,
+ int val);
+ int (*validate_trigger)(struct iio_dev *indio_dev,
+ struct iio_trigger *trig);
+ int (*update_scan_mode)(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask);
+ int (*debugfs_reg_access)(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval);
+};
+
+/**
+ * struct iio_buffer_setup_ops - buffer setup related callbacks
+ * @preenable: [DRIVER] function to run prior to marking buffer enabled
+ * @postenable: [DRIVER] function to run after marking buffer enabled
+ * @predisable: [DRIVER] function to run prior to marking buffer
+ * disabled
+ * @postdisable: [DRIVER] function to run after marking buffer disabled
+ */
+struct iio_buffer_setup_ops {
+ int (*preenable)(struct iio_dev *);
+ int (*postenable)(struct iio_dev *);
+ int (*predisable)(struct iio_dev *);
+ int (*postdisable)(struct iio_dev *);
+};
+
+/**
+ * struct iio_dev - industrial I/O device
+ * @id: [INTERN] used to identify device internally
+ * @modes: [DRIVER] operating modes supported by device
+ * @currentmode: [DRIVER] current operating mode
+ * @dev: [DRIVER] device structure, should be assigned a parent
+ * and owner
+ * @event_interface: [INTERN] event chrdevs associated with interrupt lines
+ * @buffer: [DRIVER] any buffer present
+ * @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux
+ * @mlock: [INTERN] lock used to prevent simultaneous device state
+ * changes
+ * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
+ * @masklength: [INTERN] the length of the mask established from
+ * channels
+ * @active_scan_mask: [INTERN] union of all scan masks requested by buffers
+ * @scan_timestamp: [INTERN] set if any buffers have requested timestamp
+ * @scan_index_timestamp:[INTERN] cache of the index to the timestamp
+ * @trig: [INTERN] current device trigger (buffer modes)
+ * @pollfunc: [DRIVER] function run on trigger being received
+ * @channels: [DRIVER] channel specification structure table
+ * @num_channels: [DRIVER] number of chanels specified in @channels.
+ * @channel_attr_list: [INTERN] keep track of automatically created channel
+ * attributes
+ * @chan_attr_group: [INTERN] group for all attrs in base directory
+ * @name: [DRIVER] name of the device.
+ * @info: [DRIVER] callbacks and constant info from driver
+ * @info_exist_lock: [INTERN] lock to prevent use during removal
+ * @setup_ops: [DRIVER] callbacks to call before and after buffer
+ * enable/disable
+ * @chrdev: [INTERN] associated character device
+ * @groups: [INTERN] attribute groups
+ * @groupcounter: [INTERN] index of next attribute group
+ * @flags: [INTERN] file ops related flags including busy flag.
+ * @debugfs_dentry: [INTERN] device specific debugfs dentry.
+ * @cached_reg_addr: [INTERN] cached register address for debugfs reads.
+ */
+struct iio_dev {
+ int id;
+
+ int modes;
+ int currentmode;
+ struct device dev;
+
+ struct iio_event_interface *event_interface;
+
+ struct iio_buffer *buffer;
+ int scan_bytes;
+ struct mutex mlock;
+
+ const unsigned long *available_scan_masks;
+ unsigned masklength;
+ const unsigned long *active_scan_mask;
+ bool scan_timestamp;
+ unsigned scan_index_timestamp;
+ struct iio_trigger *trig;
+ struct iio_poll_func *pollfunc;
+
+ struct iio_chan_spec const *channels;
+ int num_channels;
+
+ struct list_head channel_attr_list;
+ struct attribute_group chan_attr_group;
+ const char *name;
+ const struct iio_info *info;
+ struct mutex info_exist_lock;
+ const struct iio_buffer_setup_ops *setup_ops;
+ struct cdev chrdev;
+#define IIO_MAX_GROUPS 6
+ const struct attribute_group *groups[IIO_MAX_GROUPS + 1];
+ int groupcounter;
+
+ unsigned long flags;
+#if defined(CONFIG_DEBUG_FS)
+ struct dentry *debugfs_dentry;
+ unsigned cached_reg_addr;
+#endif
+};
+
+/**
+ * iio_find_channel_from_si() - get channel from its scan index
+ * @indio_dev: device
+ * @si: scan index to match
+ */
+const struct iio_chan_spec
+*iio_find_channel_from_si(struct iio_dev *indio_dev, int si);
+
+/**
+ * iio_device_register() - register a device with the IIO subsystem
+ * @indio_dev: Device structure filled by the device driver
+ **/
+int iio_device_register(struct iio_dev *indio_dev);
+
+/**
+ * iio_device_unregister() - unregister a device from the IIO subsystem
+ * @indio_dev: Device structure representing the device.
+ **/
+void iio_device_unregister(struct iio_dev *indio_dev);
+
+/**
+ * iio_push_event() - try to add event to the list for userspace reading
+ * @indio_dev: IIO device structure
+ * @ev_code: What event
+ * @timestamp: When the event occurred
+ **/
+int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
+
+extern struct bus_type iio_bus_type;
+
+/**
+ * iio_device_put() - reference counted deallocation of struct device
+ * @dev: the iio_device containing the device
+ **/
+static inline void iio_device_put(struct iio_dev *indio_dev)
+{
+ if (indio_dev)
+ put_device(&indio_dev->dev);
+};
+
+/**
+ * dev_to_iio_dev() - Get IIO device struct from a device struct
+ * @dev: The device embedded in the IIO device
+ *
+ * Note: The device must be a IIO device, otherwise the result is undefined.
+ */
+static inline struct iio_dev *dev_to_iio_dev(struct device *dev)
+{
+ return container_of(dev, struct iio_dev, dev);
+}
+
+/* Can we make this smaller? */
+#define IIO_ALIGN L1_CACHE_BYTES
+/**
+ * iio_device_alloc() - allocate an iio_dev from a driver
+ * @sizeof_priv: Space to allocate for private structure.
+ **/
+struct iio_dev *iio_device_alloc(int sizeof_priv);
+
+static inline void *iio_priv(const struct iio_dev *indio_dev)
+{
+ return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN);
+}
+
+static inline struct iio_dev *iio_priv_to_dev(void *priv)
+{
+ return (struct iio_dev *)((char *)priv -
+ ALIGN(sizeof(struct iio_dev), IIO_ALIGN));
+}
+
+/**
+ * iio_device_free() - free an iio_dev from a driver
+ * @dev: the iio_dev associated with the device
+ **/
+void iio_device_free(struct iio_dev *indio_dev);
+
+/**
+ * iio_buffer_enabled() - helper function to test if the buffer is enabled
+ * @indio_dev: IIO device info structure for device
+ **/
+static inline bool iio_buffer_enabled(struct iio_dev *indio_dev)
+{
+ return indio_dev->currentmode
+ & (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE);
+};
+
+/**
+ * iio_get_debugfs_dentry() - helper function to get the debugfs_dentry
+ * @indio_dev: IIO device info structure for device
+ **/
+#if defined(CONFIG_DEBUG_FS)
+static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
+{
+ return indio_dev->debugfs_dentry;
+};
+#else
+static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
+{
+ return NULL;
+};
+#endif
+
+#endif /* _INDUSTRIAL_IO_H_ */
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
new file mode 100644
index 000000000000..014d5a13b32b
--- /dev/null
+++ b/include/linux/iio/kfifo_buf.h
@@ -0,0 +1,8 @@
+
+#include <linux/kfifo.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+
+struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev);
+void iio_kfifo_free(struct iio_buffer *r);
+
diff --git a/include/linux/iio/machine.h b/include/linux/iio/machine.h
new file mode 100644
index 000000000000..0b1f19bfdc44
--- /dev/null
+++ b/include/linux/iio/machine.h
@@ -0,0 +1,24 @@
+/*
+ * Industrial I/O in kernel access map definitions for board files.
+ *
+ * Copyright (c) 2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/**
+ * struct iio_map - description of link between consumer and device channels
+ * @adc_channel_label: Label used to identify the channel on the provider.
+ * This is matched against the datasheet_name element
+ * of struct iio_chan_spec.
+ * @consumer_dev_name: Name to uniquely identify the consumer device.
+ * @consumer_channel: Unique name used to idenitify the channel on the
+ * consumer side.
+ */
+struct iio_map {
+ const char *adc_channel_label;
+ const char *consumer_dev_name;
+ const char *consumer_channel;
+};
diff --git a/include/linux/iio/sysfs.h b/include/linux/iio/sysfs.h
new file mode 100644
index 000000000000..bfedb73b850e
--- /dev/null
+++ b/include/linux/iio/sysfs.h
@@ -0,0 +1,117 @@
+/* The industrial I/O core
+ *
+ *Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * General attributes
+ */
+
+#ifndef _INDUSTRIAL_IO_SYSFS_H_
+#define _INDUSTRIAL_IO_SYSFS_H_
+
+struct iio_chan_spec;
+
+/**
+ * struct iio_dev_attr - iio specific device attribute
+ * @dev_attr: underlying device attribute
+ * @address: associated register address
+ * @l: list head for maintaining list of dynamically created attrs.
+ */
+struct iio_dev_attr {
+ struct device_attribute dev_attr;
+ u64 address;
+ struct list_head l;
+ struct iio_chan_spec const *c;
+};
+
+#define to_iio_dev_attr(_dev_attr) \
+ container_of(_dev_attr, struct iio_dev_attr, dev_attr)
+
+ssize_t iio_read_const_attr(struct device *dev,
+ struct device_attribute *attr,
+ char *len);
+
+/**
+ * struct iio_const_attr - constant device specific attribute
+ * often used for things like available modes
+ * @string: attribute string
+ * @dev_attr: underlying device attribute
+ */
+struct iio_const_attr {
+ const char *string;
+ struct device_attribute dev_attr;
+};
+
+#define to_iio_const_attr(_dev_attr) \
+ container_of(_dev_attr, struct iio_const_attr, dev_attr)
+
+/* Some attributes will be hard coded (device dependent) and not require an
+ address, in these cases pass a negative */
+#define IIO_ATTR(_name, _mode, _show, _store, _addr) \
+ { .dev_attr = __ATTR(_name, _mode, _show, _store), \
+ .address = _addr }
+
+#define IIO_DEVICE_ATTR(_name, _mode, _show, _store, _addr) \
+ struct iio_dev_attr iio_dev_attr_##_name \
+ = IIO_ATTR(_name, _mode, _show, _store, _addr)
+
+#define IIO_DEVICE_ATTR_NAMED(_vname, _name, _mode, _show, _store, _addr) \
+ struct iio_dev_attr iio_dev_attr_##_vname \
+ = IIO_ATTR(_name, _mode, _show, _store, _addr)
+
+#define IIO_CONST_ATTR(_name, _string) \
+ struct iio_const_attr iio_const_attr_##_name \
+ = { .string = _string, \
+ .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
+
+#define IIO_CONST_ATTR_NAMED(_vname, _name, _string) \
+ struct iio_const_attr iio_const_attr_##_vname \
+ = { .string = _string, \
+ .dev_attr = __ATTR(_name, S_IRUGO, iio_read_const_attr, NULL)}
+
+/* Generic attributes of onetype or another */
+/**
+ * IIO_DEV_ATTR_RESET: resets the device
+ **/
+#define IIO_DEV_ATTR_RESET(_store) \
+ IIO_DEVICE_ATTR(reset, S_IWUSR, NULL, _store, 0)
+
+/**
+ * IIO_DEV_ATTR_SAMP_FREQ - sets any internal clock frequency
+ * @_mode: sysfs file mode/permissions
+ * @_show: output method for the attribute
+ * @_store: input method for the attribute
+ **/
+#define IIO_DEV_ATTR_SAMP_FREQ(_mode, _show, _store) \
+ IIO_DEVICE_ATTR(sampling_frequency, _mode, _show, _store, 0)
+
+/**
+ * IIO_DEV_ATTR_SAMP_FREQ_AVAIL - list available sampling frequencies
+ * @_show: output method for the attribute
+ *
+ * May be mode dependent on some devices
+ **/
+#define IIO_DEV_ATTR_SAMP_FREQ_AVAIL(_show) \
+ IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO, _show, NULL, 0)
+/**
+ * IIO_CONST_ATTR_AVAIL_SAMP_FREQ - list available sampling frequencies
+ * @_string: frequency string for the attribute
+ *
+ * Constant version
+ **/
+#define IIO_CONST_ATTR_SAMP_FREQ_AVAIL(_string) \
+ IIO_CONST_ATTR(sampling_frequency_available, _string)
+
+#define IIO_DEV_ATTR_TEMP_RAW(_show) \
+ IIO_DEVICE_ATTR(in_temp_raw, S_IRUGO, _show, NULL, 0)
+
+#define IIO_CONST_ATTR_TEMP_OFFSET(_string) \
+ IIO_CONST_ATTR(in_temp_offset, _string)
+
+#define IIO_CONST_ATTR_TEMP_SCALE(_string) \
+ IIO_CONST_ATTR(in_temp_scale, _string)
+
+#endif /* _INDUSTRIAL_IO_SYSFS_H_ */
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
new file mode 100644
index 000000000000..a9819940a84c
--- /dev/null
+++ b/include/linux/iio/trigger.h
@@ -0,0 +1,119 @@
+/* The industrial I/O core, trigger handling functions
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#ifndef _IIO_TRIGGER_H_
+#define _IIO_TRIGGER_H_
+
+struct iio_subirq {
+ bool enabled;
+};
+
+/**
+ * struct iio_trigger_ops - operations structure for an iio_trigger.
+ * @owner: used to monitor usage count of the trigger.
+ * @set_trigger_state: switch on/off the trigger on demand
+ * @try_reenable: function to reenable the trigger when the
+ * use count is zero (may be NULL)
+ * @validate_device: function to validate the device when the
+ * current trigger gets changed.
+ *
+ * This is typically static const within a driver and shared by
+ * instances of a given device.
+ **/
+struct iio_trigger_ops {
+ struct module *owner;
+ int (*set_trigger_state)(struct iio_trigger *trig, bool state);
+ int (*try_reenable)(struct iio_trigger *trig);
+ int (*validate_device)(struct iio_trigger *trig,
+ struct iio_dev *indio_dev);
+};
+
+
+/**
+ * struct iio_trigger - industrial I/O trigger device
+ *
+ * @id: [INTERN] unique id number
+ * @name: [DRIVER] unique name
+ * @dev: [DRIVER] associated device (if relevant)
+ * @private_data: [DRIVER] device specific data
+ * @list: [INTERN] used in maintenance of global trigger list
+ * @alloc_list: [DRIVER] used for driver specific trigger list
+ * @use_count: use count for the trigger
+ * @subirq_chip: [INTERN] associate 'virtual' irq chip.
+ * @subirq_base: [INTERN] base number for irqs provided by trigger.
+ * @subirqs: [INTERN] information about the 'child' irqs.
+ * @pool: [INTERN] bitmap of irqs currently in use.
+ * @pool_lock: [INTERN] protection of the irq pool.
+ **/
+struct iio_trigger {
+ const struct iio_trigger_ops *ops;
+ int id;
+ const char *name;
+ struct device dev;
+
+ void *private_data;
+ struct list_head list;
+ struct list_head alloc_list;
+ int use_count;
+
+ struct irq_chip subirq_chip;
+ int subirq_base;
+
+ struct iio_subirq subirqs[CONFIG_IIO_CONSUMERS_PER_TRIGGER];
+ unsigned long pool[BITS_TO_LONGS(CONFIG_IIO_CONSUMERS_PER_TRIGGER)];
+ struct mutex pool_lock;
+};
+
+
+static inline struct iio_trigger *to_iio_trigger(struct device *d)
+{
+ return container_of(d, struct iio_trigger, dev);
+};
+
+static inline void iio_trigger_put(struct iio_trigger *trig)
+{
+ module_put(trig->ops->owner);
+ put_device(&trig->dev);
+};
+
+static inline void iio_trigger_get(struct iio_trigger *trig)
+{
+ get_device(&trig->dev);
+ __module_get(trig->ops->owner);
+};
+
+/**
+ * iio_trigger_register() - register a trigger with the IIO core
+ * @trig_info: trigger to be registered
+ **/
+int iio_trigger_register(struct iio_trigger *trig_info);
+
+/**
+ * iio_trigger_unregister() - unregister a trigger from the core
+ * @trig_info: trigger to be unregistered
+ **/
+void iio_trigger_unregister(struct iio_trigger *trig_info);
+
+/**
+ * iio_trigger_poll() - called on a trigger occurring
+ * @trig: trigger which occurred
+ *
+ * Typically called in relevant hardware interrupt handler.
+ **/
+void iio_trigger_poll(struct iio_trigger *trig, s64 time);
+void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time);
+
+irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private);
+
+__printf(1, 2) struct iio_trigger *iio_trigger_alloc(const char *fmt, ...);
+void iio_trigger_free(struct iio_trigger *trig);
+
+#endif /* _IIO_TRIGGER_H_ */
diff --git a/include/linux/iio/trigger_consumer.h b/include/linux/iio/trigger_consumer.h
new file mode 100644
index 000000000000..60d64b356945
--- /dev/null
+++ b/include/linux/iio/trigger_consumer.h
@@ -0,0 +1,52 @@
+/* The industrial I/O core, trigger consumer functions
+ *
+ * Copyright (c) 2008-2011 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/**
+ * struct iio_poll_func - poll function pair
+ *
+ * @indio_dev: data specific to device (passed into poll func)
+ * @h: the function that is actually run on trigger
+ * @thread: threaded interrupt part
+ * @type: the type of interrupt (basically if oneshot)
+ * @name: name used to identify the trigger consumer.
+ * @irq: the corresponding irq as allocated from the
+ * trigger pool
+ * @timestamp: some devices need a timestamp grabbed as soon
+ * as possible after the trigger - hence handler
+ * passes it via here.
+ **/
+struct iio_poll_func {
+ struct iio_dev *indio_dev;
+ irqreturn_t (*h)(int irq, void *p);
+ irqreturn_t (*thread)(int irq, void *p);
+ int type;
+ char *name;
+ int irq;
+ s64 timestamp;
+};
+
+
+struct iio_poll_func
+*iio_alloc_pollfunc(irqreturn_t (*h)(int irq, void *p),
+ irqreturn_t (*thread)(int irq, void *p),
+ int type,
+ struct iio_dev *indio_dev,
+ const char *fmt,
+ ...);
+void iio_dealloc_pollfunc(struct iio_poll_func *pf);
+irqreturn_t iio_pollfunc_store_time(int irq, void *p);
+
+void iio_trigger_notify_done(struct iio_trigger *trig);
+
+/*
+ * Two functions for common case where all that happens is a pollfunc
+ * is attached and detached from a trigger
+ */
+int iio_triggered_buffer_postenable(struct iio_dev *indio_dev);
+int iio_triggered_buffer_predisable(struct iio_dev *indio_dev);
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
new file mode 100644
index 000000000000..1b073b1cc7c2
--- /dev/null
+++ b/include/linux/iio/types.h
@@ -0,0 +1,55 @@
+/* industrial I/O data types needed both in and out of kernel
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _IIO_TYPES_H_
+#define _IIO_TYPES_H_
+
+enum iio_chan_type {
+ /* real channel types */
+ IIO_VOLTAGE,
+ IIO_CURRENT,
+ IIO_POWER,
+ IIO_ACCEL,
+ IIO_ANGL_VEL,
+ IIO_MAGN,
+ IIO_LIGHT,
+ IIO_INTENSITY,
+ IIO_PROXIMITY,
+ IIO_TEMP,
+ IIO_INCLI,
+ IIO_ROT,
+ IIO_ANGL,
+ IIO_TIMESTAMP,
+ IIO_CAPACITANCE,
+ IIO_ALTVOLTAGE,
+};
+
+enum iio_modifier {
+ IIO_NO_MOD,
+ IIO_MOD_X,
+ IIO_MOD_Y,
+ IIO_MOD_Z,
+ IIO_MOD_X_AND_Y,
+ IIO_MOD_X_AND_Z,
+ IIO_MOD_Y_AND_Z,
+ IIO_MOD_X_AND_Y_AND_Z,
+ IIO_MOD_X_OR_Y,
+ IIO_MOD_X_OR_Z,
+ IIO_MOD_Y_OR_Z,
+ IIO_MOD_X_OR_Y_OR_Z,
+ IIO_MOD_LIGHT_BOTH,
+ IIO_MOD_LIGHT_IR,
+};
+
+#define IIO_VAL_INT 1
+#define IIO_VAL_INT_PLUS_MICRO 2
+#define IIO_VAL_INT_PLUS_NANO 3
+#define IIO_VAL_INT_PLUS_MICRO_DB 4
+
+#endif /* _IIO_TYPES_H_ */
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index 2aea5d22db07..c91171599cb6 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -93,27 +93,27 @@ typedef irqreturn_t (*irq_handler_t)(int, void *);
/**
* struct irqaction - per interrupt action descriptor
* @handler: interrupt handler function
- * @flags: flags (see IRQF_* above)
* @name: name of the device
* @dev_id: cookie to identify the device
* @percpu_dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
- * @dir: pointer to the proc/irq/NN/name entry
+ * @flags: flags (see IRQF_* above)
* @thread_fn: interrupt handler function for threaded interrupts
* @thread: thread pointer for threaded interrupts
* @thread_flags: flags related to @thread
* @thread_mask: bitmask for keeping track of @thread activity
+ * @dir: pointer to the proc/irq/NN/name entry
*/
struct irqaction {
irq_handler_t handler;
- unsigned long flags;
void *dev_id;
void __percpu *percpu_dev_id;
struct irqaction *next;
- int irq;
irq_handler_t thread_fn;
struct task_struct *thread;
+ unsigned int irq;
+ unsigned int flags;
unsigned long thread_flags;
unsigned long thread_mask;
const char *name;
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index e885ba23de70..589e0e75efae 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -223,5 +223,12 @@ extern int
walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
void *arg, int (*func)(unsigned long, unsigned long, void *));
+/* True if any part of r1 overlaps r2 */
+static inline bool resource_overlaps(struct resource *r1, struct resource *r2)
+{
+ return (r1->start <= r2->end && r1->end >= r2->start);
+}
+
+
#endif /* __ASSEMBLY__ */
#endif /* _LINUX_IOPORT_H */
diff --git a/include/linux/irq.h b/include/linux/irq.h
index b27cfcfd3a59..61f5cec031e0 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -335,11 +335,6 @@ struct irq_chip {
void (*irq_print_chip)(struct irq_data *data, struct seq_file *p);
unsigned long flags;
-
- /* Currently used only by UML, might disappear one day.*/
-#ifdef CONFIG_IRQ_RELEASE_METHOD
- void (*release)(unsigned int irq, void *dev_id);
-#endif
};
/*
diff --git a/include/linux/isdn.h b/include/linux/isdn.h
index 292f27a793d4..215c41602af8 100644
--- a/include/linux/isdn.h
+++ b/include/linux/isdn.h
@@ -15,6 +15,7 @@
#define __ISDN_H__
#include <linux/ioctl.h>
+#include <linux/tty.h>
#define ISDN_MAX_DRIVERS 32
#define ISDN_MAX_CHANNELS 64
@@ -392,21 +393,8 @@ typedef struct isdn_net_dev_s {
/*======================= Start of ISDN-tty stuff ===========================*/
#define ISDN_ASYNC_MAGIC 0x49344C01 /* for paranoia-checking */
-#define ISDN_ASYNC_INITIALIZED 0x80000000 /* port was initialized */
-#define ISDN_ASYNC_CALLOUT_ACTIVE 0x40000000 /* Call out device active */
-#define ISDN_ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device active */
-#define ISDN_ASYNC_CLOSING 0x08000000 /* Serial port is closing */
-#define ISDN_ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */
-#define ISDN_ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */
-#define ISDN_ASYNC_HUP_NOTIFY 0x0001 /* Notify tty on hangups/closes */
-#define ISDN_ASYNC_SESSION_LOCKOUT 0x0100 /* Lock cua opens on session */
-#define ISDN_ASYNC_PGRP_LOCKOUT 0x0200 /* Lock cua opens on pgrp */
-#define ISDN_ASYNC_CALLOUT_NOHUP 0x0400 /* No hangup for cui */
-#define ISDN_ASYNC_SPLIT_TERMIOS 0x0008 /* Sep. termios for dialin/out */
#define ISDN_SERIAL_XMIT_SIZE 1024 /* Default bufsize for write */
#define ISDN_SERIAL_XMIT_MAX 4000 /* Maximum bufsize for write */
-#define ISDN_SERIAL_TYPE_NORMAL 1
-#define ISDN_SERIAL_TYPE_CALLOUT 2
#ifdef CONFIG_ISDN_AUDIO
/* For using sk_buffs with audio we need some private variables
@@ -448,17 +436,12 @@ typedef struct atemu {
/* Private data (similar to async_struct in <linux/serial.h>) */
typedef struct modem_info {
int magic;
- struct module *owner;
- int flags; /* defined in tty.h */
+ struct tty_port port;
int x_char; /* xon/xoff character */
int mcr; /* Modem control register */
int msr; /* Modem status register */
int lsr; /* Line status register */
int line;
- int count; /* # of fd on device */
- int blocked_open; /* # of blocked opens */
- long session; /* Session of opening process */
- long pgrp; /* pgrp of opening process */
int online; /* 1 = B-Channel is up, drop data */
/* 2 = B-Channel is up, deliver d.*/
int dialing; /* Dial in progress or ATA */
@@ -478,7 +461,6 @@ typedef struct modem_info {
int send_outstanding;/* # of outstanding send-requests */
int xmit_size; /* max. # of chars in xmit_buf */
int xmit_count; /* # of chars in xmit_buf */
- unsigned char *xmit_buf; /* transmit buffer */
struct sk_buff_head xmit_queue; /* transmit queue */
atomic_t xmit_lock; /* Semaphore for isdn_tty_write */
#ifdef CONFIG_ISDN_AUDIO
@@ -496,11 +478,7 @@ typedef struct modem_info {
struct T30_s *fax; /* T30 Fax Group 3 data/interface */
int faxonline; /* Fax-channel status */
#endif
- struct tty_struct *tty; /* Pointer to corresponding tty */
atemu emu; /* AT-emulator data */
- struct ktermios normal_termios; /* For saving termios structs */
- struct ktermios callout_termios;
- wait_queue_head_t open_wait, close_wait;
spinlock_t readlock;
} modem_info;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 645231c373c8..c0d34420a913 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -480,15 +480,16 @@ do { \
#define trace_printk(fmt, args...) \
do { \
+ static const char *trace_printk_fmt \
+ __attribute__((section("__trace_printk_fmt"))) = \
+ __builtin_constant_p(fmt) ? fmt : NULL; \
+ \
__trace_printk_check_format(fmt, ##args); \
- if (__builtin_constant_p(fmt)) { \
- static const char *trace_printk_fmt \
- __attribute__((section("__trace_printk_fmt"))) = \
- __builtin_constant_p(fmt) ? fmt : NULL; \
\
+ if (__builtin_constant_p(fmt)) \
__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \
- } else \
- __trace_printk(_THIS_IP_, fmt, ##args); \
+ else \
+ __trace_printk(_THIS_IP_, fmt, ##args); \
} while (0)
extern __printf(2, 3)
diff --git a/include/linux/key.h b/include/linux/key.h
index 96933b1e5d24..5231800770e1 100644
--- a/include/linux/key.h
+++ b/include/linux/key.h
@@ -124,7 +124,10 @@ static inline unsigned long is_key_possessed(const key_ref_t key_ref)
struct key {
atomic_t usage; /* number of references */
key_serial_t serial; /* key serial number */
- struct rb_node serial_node;
+ union {
+ struct list_head graveyard_link;
+ struct rb_node serial_node;
+ };
struct key_type *type; /* type of key */
struct rw_semaphore sem; /* change vs change sem */
struct key_user *user; /* owner of this key */
@@ -133,6 +136,7 @@ struct key {
time_t expiry; /* time at which key expires (or 0) */
time_t revoked_at; /* time at which key was revoked */
};
+ time_t last_used_at; /* last time used for LRU keyring discard */
uid_t uid;
gid_t gid;
key_perm_t perm; /* access permissions */
@@ -156,6 +160,7 @@ struct key {
#define KEY_FLAG_USER_CONSTRUCT 4 /* set if key is being constructed in userspace */
#define KEY_FLAG_NEGATIVE 5 /* set if key is negative */
#define KEY_FLAG_ROOT_CAN_CLEAR 6 /* set if key can be cleared by root without permission */
+#define KEY_FLAG_INVALIDATED 7 /* set if key has been invalidated */
/* the description string
* - this is used to match a key against search criteria
@@ -199,6 +204,7 @@ extern struct key *key_alloc(struct key_type *type,
#define KEY_ALLOC_NOT_IN_QUOTA 0x0002 /* not in quota */
extern void key_revoke(struct key *key);
+extern void key_invalidate(struct key *key);
extern void key_put(struct key *key);
static inline struct key *key_get(struct key *key)
@@ -236,7 +242,7 @@ extern struct key *request_key_async_with_auxdata(struct key_type *type,
extern int wait_for_key_construction(struct key *key, bool intr);
-extern int key_validate(struct key *key);
+extern int key_validate(const struct key *key);
extern key_ref_t key_create_or_update(key_ref_t keyring,
const char *type,
@@ -319,6 +325,7 @@ extern void key_init(void);
#define key_serial(k) 0
#define key_get(k) ({ NULL; })
#define key_revoke(k) do { } while(0)
+#define key_invalidate(k) do { } while(0)
#define key_put(k) do { } while(0)
#define key_ref_put(k) do { } while(0)
#define make_key_ref(k, p) NULL
diff --git a/include/linux/keyctl.h b/include/linux/keyctl.h
index 9b0b865ce622..c9b7f4faf97a 100644
--- a/include/linux/keyctl.h
+++ b/include/linux/keyctl.h
@@ -55,5 +55,6 @@
#define KEYCTL_SESSION_TO_PARENT 18 /* apply session keyring to parent process */
#define KEYCTL_REJECT 19 /* reject a partially constructed key */
#define KEYCTL_INSTANTIATE_IOV 20 /* instantiate a partially constructed key */
+#define KEYCTL_INVALIDATE 21 /* invalidate a key */
#endif /* _LINUX_KEYCTL_H */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index e926df7b54c9..6e887c742a27 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -247,6 +247,7 @@ enum {
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host only */
ATA_HOST_STARTED = (1 << 1), /* Host started */
ATA_HOST_PARALLEL_SCAN = (1 << 2), /* Ports on this host can be scanned in parallel */
+ ATA_HOST_IGNORE_ATA = (1 << 3), /* Ignore ATA devices on this host. */
/* bits 24:31 of host->flags are reserved for LLD specific flags */
diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h
index d36619ead3ba..00e46376e28f 100644
--- a/include/linux/lockdep.h
+++ b/include/linux/lockdep.h
@@ -157,6 +157,24 @@ struct lockdep_map {
#endif
};
+static inline void lockdep_copy_map(struct lockdep_map *to,
+ struct lockdep_map *from)
+{
+ int i;
+
+ *to = *from;
+ /*
+ * Since the class cache can be modified concurrently we could observe
+ * half pointers (64bit arch using 32bit copy insns). Therefore clear
+ * the caches and take the performance hit.
+ *
+ * XXX it doesn't work well with lockdep_set_class_and_subclass(), since
+ * that relies on cache abuse.
+ */
+ for (i = 0; i < NR_LOCKDEP_CACHING_CLASSES; i++)
+ to->class_cache[i] = NULL;
+}
+
/*
* Every lock has a list of other locks that were taken after it.
* We only grow the list, never remove from it:
diff --git a/include/linux/lsm_audit.h b/include/linux/lsm_audit.h
index fad48aab893b..1cc89e9df480 100644
--- a/include/linux/lsm_audit.h
+++ b/include/linux/lsm_audit.h
@@ -53,7 +53,6 @@ struct common_audit_data {
#define LSM_AUDIT_DATA_KMOD 8
#define LSM_AUDIT_DATA_INODE 9
#define LSM_AUDIT_DATA_DENTRY 10
- struct task_struct *tsk;
union {
struct path path;
struct dentry *dentry;
@@ -93,11 +92,6 @@ int ipv4_skb_to_auditdata(struct sk_buff *skb,
int ipv6_skb_to_auditdata(struct sk_buff *skb,
struct common_audit_data *ad, u8 *proto);
-/* Initialize an LSM audit data structure. */
-#define COMMON_AUDIT_DATA_INIT(_d, _t) \
- { memset((_d), 0, sizeof(struct common_audit_data)); \
- (_d)->type = LSM_AUDIT_DATA_##_t; }
-
void common_lsm_audit(struct common_audit_data *a,
void (*pre_audit)(struct audit_buffer *, void *),
void (*post_audit)(struct audit_buffer *, void *));
diff --git a/include/linux/mei.h b/include/linux/mei.h
new file mode 100644
index 000000000000..bc0d8b69c49e
--- /dev/null
+++ b/include/linux/mei.h
@@ -0,0 +1,110 @@
+/******************************************************************************
+ * Intel Management Engine Interface (Intel MEI) Linux driver
+ * Intel MEI Interface Header
+ *
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
+ * USA
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation.
+ * linux-mei@linux.intel.com
+ * http://www.intel.com
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2003 - 2012 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *****************************************************************************/
+
+#ifndef _LINUX_MEI_H
+#define _LINUX_MEI_H
+
+#include <linux/uuid.h>
+
+/*
+ * This IOCTL is used to associate the current file descriptor with a
+ * FW Client (given by UUID). This opens a communication channel
+ * between a host client and a FW client. From this point every read and write
+ * will communicate with the associated FW client.
+ * Only in close() (file_operation release()) the communication between
+ * the clients is disconnected
+ *
+ * The IOCTL argument is a struct with a union that contains
+ * the input parameter and the output parameter for this IOCTL.
+ *
+ * The input parameter is UUID of the FW Client.
+ * The output parameter is the properties of the FW client
+ * (FW protocol version and max message size).
+ *
+ */
+#define IOCTL_MEI_CONNECT_CLIENT \
+ _IOWR('H' , 0x01, struct mei_connect_client_data)
+
+/*
+ * Intel MEI client information struct
+ */
+struct mei_client {
+ __u32 max_msg_length;
+ __u8 protocol_version;
+ __u8 reserved[3];
+};
+
+/*
+ * IOCTL Connect Client Data structure
+ */
+struct mei_connect_client_data {
+ union {
+ uuid_le in_client_uuid;
+ struct mei_client out_client_properties;
+ };
+};
+
+#endif /* _LINUX_MEI_H */
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index ee96cd51d8b2..1318ca622633 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -6,7 +6,7 @@
*
* ABX500 core access functions.
* The abx500 interface is used for the Analog Baseband chip
- * ab3100, ab5500, and ab8500.
+ * ab3100 and ab8500.
*
* Author: Mattias Wallin <mattias.wallin@stericsson.com>
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
@@ -30,9 +30,6 @@ struct device;
#define AB3100_P1G 0xc6
#define AB3100_R2A 0xc7
#define AB3100_R2B 0xc8
-#define AB5500_1_0 0x20
-#define AB5500_1_1 0x21
-#define AB5500_2_0 0x24
/*
* AB3100, EVENTA1, A2 and A3 event register flags
diff --git a/include/linux/mfd/abx500/ab5500.h b/include/linux/mfd/abx500/ab5500.h
deleted file mode 100644
index 54f820ed73bb..000000000000
--- a/include/linux/mfd/abx500/ab5500.h
+++ /dev/null
@@ -1,140 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson 2011
- *
- * License Terms: GNU General Public License v2
- */
-#ifndef MFD_AB5500_H
-#define MFD_AB5500_H
-
-struct device;
-
-enum ab5500_devid {
- AB5500_DEVID_ADC,
- AB5500_DEVID_LEDS,
- AB5500_DEVID_POWER,
- AB5500_DEVID_REGULATORS,
- AB5500_DEVID_SIM,
- AB5500_DEVID_RTC,
- AB5500_DEVID_CHARGER,
- AB5500_DEVID_FUELGAUGE,
- AB5500_DEVID_VIBRATOR,
- AB5500_DEVID_CODEC,
- AB5500_DEVID_USB,
- AB5500_DEVID_OTP,
- AB5500_DEVID_VIDEO,
- AB5500_DEVID_DBIECI,
- AB5500_DEVID_ONSWA,
- AB5500_NUM_DEVICES,
-};
-
-enum ab5500_banks {
- AB5500_BANK_VIT_IO_I2C_CLK_TST_OTP = 0,
- AB5500_BANK_VDDDIG_IO_I2C_CLK_TST = 1,
- AB5500_BANK_VDENC = 2,
- AB5500_BANK_SIM_USBSIM = 3,
- AB5500_BANK_LED = 4,
- AB5500_BANK_ADC = 5,
- AB5500_BANK_RTC = 6,
- AB5500_BANK_STARTUP = 7,
- AB5500_BANK_DBI_ECI = 8,
- AB5500_BANK_CHG = 9,
- AB5500_BANK_FG_BATTCOM_ACC = 10,
- AB5500_BANK_USB = 11,
- AB5500_BANK_IT = 12,
- AB5500_BANK_VIBRA = 13,
- AB5500_BANK_AUDIO_HEADSETUSB = 14,
- AB5500_NUM_BANKS = 15,
-};
-
-enum ab5500_banks_addr {
- AB5500_ADDR_VIT_IO_I2C_CLK_TST_OTP = 0x4A,
- AB5500_ADDR_VDDDIG_IO_I2C_CLK_TST = 0x4B,
- AB5500_ADDR_VDENC = 0x06,
- AB5500_ADDR_SIM_USBSIM = 0x04,
- AB5500_ADDR_LED = 0x10,
- AB5500_ADDR_ADC = 0x0A,
- AB5500_ADDR_RTC = 0x0F,
- AB5500_ADDR_STARTUP = 0x03,
- AB5500_ADDR_DBI_ECI = 0x07,
- AB5500_ADDR_CHG = 0x0B,
- AB5500_ADDR_FG_BATTCOM_ACC = 0x0C,
- AB5500_ADDR_USB = 0x05,
- AB5500_ADDR_IT = 0x0E,
- AB5500_ADDR_VIBRA = 0x02,
- AB5500_ADDR_AUDIO_HEADSETUSB = 0x0D,
-};
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB5500_IT_SOURCE0_REG 0x20
-#define AB5500_IT_SOURCE1_REG 0x21
-#define AB5500_IT_SOURCE2_REG 0x22
-#define AB5500_IT_SOURCE3_REG 0x23
-#define AB5500_IT_SOURCE4_REG 0x24
-#define AB5500_IT_SOURCE5_REG 0x25
-#define AB5500_IT_SOURCE6_REG 0x26
-#define AB5500_IT_SOURCE7_REG 0x27
-#define AB5500_IT_SOURCE8_REG 0x28
-#define AB5500_IT_SOURCE9_REG 0x29
-#define AB5500_IT_SOURCE10_REG 0x2A
-#define AB5500_IT_SOURCE11_REG 0x2B
-#define AB5500_IT_SOURCE12_REG 0x2C
-#define AB5500_IT_SOURCE13_REG 0x2D
-#define AB5500_IT_SOURCE14_REG 0x2E
-#define AB5500_IT_SOURCE15_REG 0x2F
-#define AB5500_IT_SOURCE16_REG 0x30
-#define AB5500_IT_SOURCE17_REG 0x31
-#define AB5500_IT_SOURCE18_REG 0x32
-#define AB5500_IT_SOURCE19_REG 0x33
-#define AB5500_IT_SOURCE20_REG 0x34
-#define AB5500_IT_SOURCE21_REG 0x35
-#define AB5500_IT_SOURCE22_REG 0x36
-#define AB5500_IT_SOURCE23_REG 0x37
-
-#define AB5500_NUM_IRQ_REGS 23
-
-/**
- * struct ab5500
- * @access_mutex: lock out concurrent accesses to the AB registers
- * @dev: a pointer to the device struct for this chip driver
- * @ab5500_irq: the analog baseband irq
- * @irq_base: the platform configuration irq base for subdevices
- * @chip_name: name of this chip variant
- * @chip_id: 8 bit chip ID for this chip variant
- * @irq_lock: a lock to protect the mask
- * @abb_events: a local bit mask of the prcmu wakeup events
- * @event_mask: a local copy of the mask event registers
- * @last_event_mask: a copy of the last event_mask written to hardware
- * @startup_events: a copy of the first reading of the event registers
- * @startup_events_read: whether the first events have been read
- */
-struct ab5500 {
- struct mutex access_mutex;
- struct device *dev;
- unsigned int ab5500_irq;
- unsigned int irq_base;
- char chip_name[32];
- u8 chip_id;
- struct mutex irq_lock;
- u32 abb_events;
- u8 mask[AB5500_NUM_IRQ_REGS];
- u8 oldmask[AB5500_NUM_IRQ_REGS];
- u8 startup_events[AB5500_NUM_IRQ_REGS];
- bool startup_events_read;
-#ifdef CONFIG_DEBUG_FS
- unsigned int debug_bank;
- unsigned int debug_address;
-#endif
-};
-
-struct ab5500_platform_data {
- struct {unsigned int base; unsigned int count; } irq;
- void *dev_data[AB5500_NUM_DEVICES];
- struct abx500_init_settings *init_settings;
- unsigned int init_settings_sz;
- bool pm_power_off;
-};
-
-#endif /* MFD_AB5500_H */
diff --git a/include/linux/mfd/asic3.h b/include/linux/mfd/asic3.h
index ed793b77a1c5..ef6faa5cee46 100644
--- a/include/linux/mfd/asic3.h
+++ b/include/linux/mfd/asic3.h
@@ -138,6 +138,7 @@ struct asic3_platform_data {
#define ASIC3_GPIOC13_nPWAIT ASIC3_CONFIG_GPIO(45, 1, 1, 0)
#define ASIC3_GPIOC14_nPIOIS16 ASIC3_CONFIG_GPIO(46, 1, 1, 0)
#define ASIC3_GPIOC15_nPIOR ASIC3_CONFIG_GPIO(47, 1, 0, 0)
+#define ASIC3_GPIOD4_CF_nCD ASIC3_CONFIG_GPIO(52, 1, 0, 0)
#define ASIC3_GPIOD11_nCIOIS16 ASIC3_CONFIG_GPIO(59, 1, 0, 0)
#define ASIC3_GPIOD12_nCWAIT ASIC3_CONFIG_GPIO(60, 1, 0, 0)
#define ASIC3_GPIOD15_nPIOW ASIC3_CONFIG_GPIO(63, 1, 0, 0)
diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h
index 7ffbd6e9e7fc..8313cd9658e3 100644
--- a/include/linux/mfd/da9052/da9052.h
+++ b/include/linux/mfd/da9052/da9052.h
@@ -80,6 +80,7 @@ struct da9052 {
struct regmap *regmap;
int irq_base;
+ struct regmap_irq_chip_data *irq_data;
u8 chip_id;
int chip_irq;
diff --git a/include/linux/mfd/db5500-prcmu.h b/include/linux/mfd/db5500-prcmu.h
deleted file mode 100644
index 5a049dfaf153..000000000000
--- a/include/linux/mfd/db5500-prcmu.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * U5500 PRCMU API.
- */
-#ifndef __MFD_DB5500_PRCMU_H
-#define __MFD_DB5500_PRCMU_H
-
-static inline int prcmu_resetout(u8 resoutn, u8 state)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_epod(u16 epod_id, u8 epod_state)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_request_clock(u8 clock, bool enable)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
- bool keep_ap_pll)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_config_esram0_deep_sleep(u8 state)
-{
- return 0;
-}
-
-static inline u16 db5500_prcmu_get_reset_code(void)
-{
- return 0;
-}
-
-static inline bool db5500_prcmu_is_ac_wake_requested(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_set_arm_opp(u8 opp)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_get_arm_opp(void)
-{
- return 0;
-}
-
-static inline void db5500_prcmu_config_abb_event_readout(u32 abb_events) {}
-
-static inline void db5500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
-
-static inline void db5500_prcmu_system_reset(u16 reset_code) {}
-
-static inline void db5500_prcmu_enable_wakeups(u32 wakeups) {}
-
-#ifdef CONFIG_MFD_DB5500_PRCMU
-
-void db5500_prcmu_early_init(void);
-int db5500_prcmu_set_display_clocks(void);
-int db5500_prcmu_disable_dsipll(void);
-int db5500_prcmu_enable_dsipll(void);
-int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
-int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
-
-#else /* !CONFIG_UX500_SOC_DB5500 */
-
-static inline void db5500_prcmu_early_init(void) {}
-
-static inline int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
-{
- return -ENOSYS;
-}
-
-static inline int db5500_prcmu_set_display_clocks(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_disable_dsipll(void)
-{
- return 0;
-}
-
-static inline int db5500_prcmu_enable_dsipll(void)
-{
- return 0;
-}
-
-#endif /* CONFIG_MFD_DB5500_PRCMU */
-
-#endif /* __MFD_DB5500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index d7674eb7305f..5a13f93d8f1c 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -55,17 +55,6 @@ enum prcmu_wakeup_index {
#define NUM_EPOD_ID 8
/*
- * DB5500 EPODs
- */
-#define DB5500_EPOD_ID_BASE 0x0100
-#define DB5500_EPOD_ID_SGA (DB5500_EPOD_ID_BASE + 0)
-#define DB5500_EPOD_ID_HVA (DB5500_EPOD_ID_BASE + 1)
-#define DB5500_EPOD_ID_SIA (DB5500_EPOD_ID_BASE + 2)
-#define DB5500_EPOD_ID_DISP (DB5500_EPOD_ID_BASE + 3)
-#define DB5500_EPOD_ID_ESRAM12 (DB5500_EPOD_ID_BASE + 6)
-#define DB5500_NUM_EPOD_ID 7
-
-/*
* state definition for EPOD (power domain)
* - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
* - EPOD_STATE_OFF: The EPOD is switched off
@@ -80,29 +69,6 @@ enum prcmu_wakeup_index {
#define EPOD_STATE_ON_CLK_OFF 0x03
#define EPOD_STATE_ON 0x04
-/* DB5500 CLKOUT IDs */
-enum {
- DB5500_CLKOUT0 = 0,
- DB5500_CLKOUT1,
-};
-
-/* DB5500 CLKOUTx sources */
-enum {
- DB5500_CLKOUT_REF_CLK_SEL0,
- DB5500_CLKOUT_RTC_CLK0_SEL0,
- DB5500_CLKOUT_ULP_CLK_SEL0,
- DB5500_CLKOUT_STATIC0,
- DB5500_CLKOUT_REFCLK,
- DB5500_CLKOUT_ULPCLK,
- DB5500_CLKOUT_ARMCLK,
- DB5500_CLKOUT_SYSACC0CLK,
- DB5500_CLKOUT_SOC0PLLCLK,
- DB5500_CLKOUT_SOC1PLLCLK,
- DB5500_CLKOUT_DDRPLLCLK,
- DB5500_CLKOUT_TVCLK,
- DB5500_CLKOUT_IRDACLK,
-};
-
/*
* CLKOUT sources
*/
@@ -248,101 +214,66 @@ enum ddr_pwrst {
};
#include <linux/mfd/db8500-prcmu.h>
-#include <linux/mfd/db5500-prcmu.h>
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+#if defined(CONFIG_UX500_SOC_DB8500)
#include <mach/id.h>
static inline void __init prcmu_early_init(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_early_init();
- else
- return db8500_prcmu_early_init();
+ return db8500_prcmu_early_init();
}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
{
- if (cpu_is_u5500())
- return db5500_prcmu_set_power_state(state, keep_ulp_clk,
- keep_ap_pll);
- else
- return db8500_prcmu_set_power_state(state, keep_ulp_clk,
- keep_ap_pll);
+ return db8500_prcmu_set_power_state(state, keep_ulp_clk,
+ keep_ap_pll);
}
static inline u8 prcmu_get_power_state_result(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_power_state_result();
+ return db8500_prcmu_get_power_state_result();
}
static inline int prcmu_gic_decouple(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_decouple();
+ return db8500_prcmu_gic_decouple();
}
static inline int prcmu_gic_recouple(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_recouple();
+ return db8500_prcmu_gic_recouple();
}
static inline bool prcmu_gic_pending_irq(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_gic_pending_irq();
+ return db8500_prcmu_gic_pending_irq();
}
static inline bool prcmu_is_cpu_in_wfi(int cpu)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_is_cpu_in_wfi(cpu);
+ return db8500_prcmu_is_cpu_in_wfi(cpu);
}
static inline int prcmu_copy_gic_settings(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_copy_gic_settings();
+ return db8500_prcmu_copy_gic_settings();
}
static inline bool prcmu_pending_irq(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_pending_irq();
+ return db8500_prcmu_pending_irq();
}
static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_epod(epod_id, epod_state);
+ return db8500_prcmu_set_epod(epod_id, epod_state);
}
static inline void prcmu_enable_wakeups(u32 wakeups)
{
- if (cpu_is_u5500())
- db5500_prcmu_enable_wakeups(wakeups);
- else
- db8500_prcmu_enable_wakeups(wakeups);
+ db8500_prcmu_enable_wakeups(wakeups);
}
static inline void prcmu_disable_wakeups(void)
@@ -352,18 +283,12 @@ static inline void prcmu_disable_wakeups(void)
static inline void prcmu_config_abb_event_readout(u32 abb_events)
{
- if (cpu_is_u5500())
- db5500_prcmu_config_abb_event_readout(abb_events);
- else
- db8500_prcmu_config_abb_event_readout(abb_events);
+ db8500_prcmu_config_abb_event_readout(abb_events);
}
static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
{
- if (cpu_is_u5500())
- db5500_prcmu_get_abb_event_buffer(buf);
- else
- db8500_prcmu_get_abb_event_buffer(buf);
+ db8500_prcmu_get_abb_event_buffer(buf);
}
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
@@ -374,10 +299,7 @@ int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
static inline int prcmu_request_clock(u8 clock, bool enable)
{
- if (cpu_is_u5500())
- return db5500_prcmu_request_clock(clock, enable);
- else
- return db8500_prcmu_request_clock(clock, enable);
+ return db8500_prcmu_request_clock(clock, enable);
}
unsigned long prcmu_clock_rate(u8 clock);
@@ -386,211 +308,133 @@ int prcmu_set_clock_rate(u8 clock, unsigned long rate);
static inline int prcmu_set_ddr_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_ddr_opp(opp);
+ return db8500_prcmu_set_ddr_opp(opp);
}
static inline int prcmu_get_ddr_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_ddr_opp();
+ return db8500_prcmu_get_ddr_opp();
}
static inline int prcmu_set_arm_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_arm_opp(opp);
+ return db8500_prcmu_set_arm_opp(opp);
}
static inline int prcmu_get_arm_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_arm_opp();
+ return db8500_prcmu_get_arm_opp();
}
static inline int prcmu_set_ape_opp(u8 opp)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_set_ape_opp(opp);
+ return db8500_prcmu_set_ape_opp(opp);
}
static inline int prcmu_get_ape_opp(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_get_ape_opp();
+ return db8500_prcmu_get_ape_opp();
}
static inline void prcmu_system_reset(u16 reset_code)
{
- if (cpu_is_u5500())
- return db5500_prcmu_system_reset(reset_code);
- else
- return db8500_prcmu_system_reset(reset_code);
+ return db8500_prcmu_system_reset(reset_code);
}
static inline u16 prcmu_get_reset_code(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_get_reset_code();
- else
- return db8500_prcmu_get_reset_code();
+ return db8500_prcmu_get_reset_code();
}
void prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
static inline void prcmu_modem_reset(void)
{
- if (cpu_is_u5500())
- return;
- else
- return db8500_prcmu_modem_reset();
+ return db8500_prcmu_modem_reset();
}
static inline bool prcmu_is_ac_wake_requested(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_is_ac_wake_requested();
- else
- return db8500_prcmu_is_ac_wake_requested();
+ return db8500_prcmu_is_ac_wake_requested();
}
static inline int prcmu_set_display_clocks(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_set_display_clocks();
- else
- return db8500_prcmu_set_display_clocks();
+ return db8500_prcmu_set_display_clocks();
}
static inline int prcmu_disable_dsipll(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_disable_dsipll();
- else
- return db8500_prcmu_disable_dsipll();
+ return db8500_prcmu_disable_dsipll();
}
static inline int prcmu_enable_dsipll(void)
{
- if (cpu_is_u5500())
- return db5500_prcmu_enable_dsipll();
- else
- return db8500_prcmu_enable_dsipll();
+ return db8500_prcmu_enable_dsipll();
}
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_esram0_deep_sleep(state);
+ return db8500_prcmu_config_esram0_deep_sleep(state);
}
static inline int prcmu_config_hotdog(u8 threshold)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_hotdog(threshold);
+ return db8500_prcmu_config_hotdog(threshold);
}
static inline int prcmu_config_hotmon(u8 low, u8 high)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_hotmon(low, high);
+ return db8500_prcmu_config_hotmon(low, high);
}
static inline int prcmu_start_temp_sense(u16 cycles32k)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_start_temp_sense(cycles32k);
+ return db8500_prcmu_start_temp_sense(cycles32k);
}
static inline int prcmu_stop_temp_sense(void)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_stop_temp_sense();
+ return db8500_prcmu_stop_temp_sense();
}
static inline u32 prcmu_read(unsigned int reg)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_read(reg);
+ return db8500_prcmu_read(reg);
}
static inline void prcmu_write(unsigned int reg, u32 value)
{
- if (cpu_is_u5500())
- return;
- else
- db8500_prcmu_write(reg, value);
+ db8500_prcmu_write(reg, value);
}
static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
{
- if (cpu_is_u5500())
- return;
- else
- db8500_prcmu_write_masked(reg, mask, value);
+ db8500_prcmu_write_masked(reg, mask, value);
}
static inline int prcmu_enable_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_enable_a9wdog(id);
+ return db8500_prcmu_enable_a9wdog(id);
}
static inline int prcmu_disable_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_disable_a9wdog(id);
+ return db8500_prcmu_disable_a9wdog(id);
}
static inline int prcmu_kick_a9wdog(u8 id)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_kick_a9wdog(id);
+ return db8500_prcmu_kick_a9wdog(id);
}
static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_load_a9wdog(id, timeout);
+ return db8500_prcmu_load_a9wdog(id, timeout);
}
static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
{
- if (cpu_is_u5500())
- return -EINVAL;
- else
- return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
+ return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
}
#else
@@ -768,7 +612,7 @@ static inline void prcmu_clear(unsigned int reg, u32 bits)
prcmu_write_masked(reg, bits, 0);
}
-#if defined(CONFIG_UX500_SOC_DB8500) || defined(CONFIG_UX500_SOC_DB5500)
+#if defined(CONFIG_UX500_SOC_DB8500)
/**
* prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
index 28726dd540f2..b40c08cd30bc 100644
--- a/include/linux/mfd/max8997.h
+++ b/include/linux/mfd/max8997.h
@@ -99,34 +99,11 @@ struct max8997_muic_reg_data {
/**
* struct max8997_muic_platform_data
- * @usb_callback: callback function for USB
- * inform callee of USB type (HOST or DEVICE)
- * and attached state(true or false)
- * @charger_callback: callback function for charger
- * inform callee of charger_type
- * and attached state(true or false)
- * @deskdock_callback: callback function for desk dock
- * inform callee of attached state(true or false)
- * @cardock_callback: callback function for car dock
- * inform callee of attached state(true or false)
- * @mhl_callback: callback function for MHL (Mobile High-definition Link)
- * inform callee of attached state(true or false)
- * @uart_callback: callback function for JIG UART
- * inform callee of attached state(true or false)
* @init_data: array of max8997_muic_reg_data
* used for initializing registers of MAX8997 MUIC device
* @num_init_data: array size of init_data
*/
struct max8997_muic_platform_data {
- void (*usb_callback)(enum max8997_muic_usb_type usb_type,
- bool attached);
- void (*charger_callback)(bool attached,
- enum max8997_muic_charger_type charger_type);
- void (*deskdock_callback) (bool attached);
- void (*cardock_callback) (bool attached);
- void (*mhl_callback) (bool attached);
- void (*uart_callback) (bool attached);
-
struct max8997_muic_reg_data *init_data;
int num_init_data;
};
diff --git a/include/linux/mfd/mc13xxx.h b/include/linux/mfd/mc13xxx.h
index 10e038bac8dd..bf070755982e 100644
--- a/include/linux/mfd/mc13xxx.h
+++ b/include/linux/mfd/mc13xxx.h
@@ -170,6 +170,16 @@ struct mc13xxx_ts_platform_data {
bool atox;
};
+enum mc13783_ssi_port {
+ MC13783_SSI1_PORT,
+ MC13783_SSI2_PORT,
+};
+
+struct mc13xxx_codec_platform_data {
+ enum mc13783_ssi_port adc_ssi_port;
+ enum mc13783_ssi_port dac_ssi_port;
+};
+
struct mc13xxx_platform_data {
#define MC13XXX_USE_TOUCHSCREEN (1 << 0)
#define MC13XXX_USE_CODEC (1 << 1)
@@ -181,6 +191,7 @@ struct mc13xxx_platform_data {
struct mc13xxx_leds_platform_data *leds;
struct mc13xxx_buttons_platform_data *buttons;
struct mc13xxx_ts_platform_data touch;
+ struct mc13xxx_codec_platform_data *codec;
};
#define MC13XXX_ADC_MODE_TS 1
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
new file mode 100644
index 000000000000..9cbc642d40ad
--- /dev/null
+++ b/include/linux/mfd/palmas.h
@@ -0,0 +1,2620 @@
+/*
+ * TI Palmas
+ *
+ * Copyright 2011 Texas Instruments Inc.
+ *
+ * Author: Graeme Gregory <gg@slimlogic.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MFD_PALMAS_H
+#define __LINUX_MFD_PALMAS_H
+
+#include <linux/usb/otg.h>
+#include <linux/leds.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+#define PALMAS_NUM_CLIENTS 3
+
+struct palmas_pmic;
+
+struct palmas {
+ struct device *dev;
+
+ struct i2c_client *i2c_clients[PALMAS_NUM_CLIENTS];
+ struct regmap *regmap[PALMAS_NUM_CLIENTS];
+
+ /* Stored chip id */
+ int id;
+
+ /* IRQ Data */
+ int irq;
+ u32 irq_mask;
+ struct mutex irq_lock;
+ struct regmap_irq_chip_data *irq_data;
+
+ /* Child Devices */
+ struct palmas_pmic *pmic;
+
+ /* GPIO MUXing */
+ u8 gpio_muxed;
+ u8 led_muxed;
+ u8 pwm_muxed;
+};
+
+struct palmas_reg_init {
+ /* warm_rest controls the voltage levels after a warm reset
+ *
+ * 0: reload default values from OTP on warm reset
+ * 1: maintain voltage from VSEL on warm reset
+ */
+ int warm_reset;
+
+ /* roof_floor controls whether the regulator uses the i2c style
+ * of DVS or uses the method where a GPIO or other control method is
+ * attached to the NSLEEP/ENABLE1/ENABLE2 pins
+ *
+ * For SMPS
+ *
+ * 0: i2c selection of voltage
+ * 1: pin selection of voltage.
+ *
+ * For LDO unused
+ */
+ int roof_floor;
+
+ /* sleep_mode is the mode loaded to MODE_SLEEP bits as defined in
+ * the data sheet.
+ *
+ * For SMPS
+ *
+ * 0: Off
+ * 1: AUTO
+ * 2: ECO
+ * 3: Forced PWM
+ *
+ * For LDO
+ *
+ * 0: Off
+ * 1: On
+ */
+ int mode_sleep;
+
+ /* tstep is the timestep loaded to the TSTEP register
+ *
+ * For SMPS
+ *
+ * 0: Jump (no slope control)
+ * 1: 10mV/us
+ * 2: 5mV/us
+ * 3: 2.5mV/us
+ *
+ * For LDO unused
+ */
+ int tstep;
+
+ /* voltage_sel is the bitfield loaded onto the SMPSX_VOLTAGE
+ * register. Set this is the default voltage set in OTP needs
+ * to be overridden.
+ */
+ u8 vsel;
+
+};
+
+struct palmas_pmic_platform_data {
+ /* An array of pointers to regulator init data indexed by regulator
+ * ID
+ */
+ struct regulator_init_data **reg_data;
+
+ /* An array of pointers to structures containing sleep mode and DVS
+ * configuration for regulators indexed by ID
+ */
+ struct palmas_reg_init **reg_init;
+
+ /* use LDO6 for vibrator control */
+ int ldo6_vibrator;
+
+
+};
+
+struct palmas_platform_data {
+ int gpio_base;
+
+ /* bit value to be loaded to the POWER_CTRL register */
+ u8 power_ctrl;
+
+ /*
+ * boolean to select if we want to configure muxing here
+ * then the two value to load into the registers if true
+ */
+ int mux_from_pdata;
+ u8 pad1, pad2;
+
+ struct palmas_pmic_platform_data *pmic_pdata;
+};
+
+/* Define the palmas IRQ numbers */
+enum palmas_irqs {
+ /* INT1 registers */
+ PALMAS_CHARG_DET_N_VBUS_OVV_IRQ,
+ PALMAS_PWRON_IRQ,
+ PALMAS_LONG_PRESS_KEY_IRQ,
+ PALMAS_RPWRON_IRQ,
+ PALMAS_PWRDOWN_IRQ,
+ PALMAS_HOTDIE_IRQ,
+ PALMAS_VSYS_MON_IRQ,
+ PALMAS_VBAT_MON_IRQ,
+ /* INT2 registers */
+ PALMAS_RTC_ALARM_IRQ,
+ PALMAS_RTC_TIMER_IRQ,
+ PALMAS_WDT_IRQ,
+ PALMAS_BATREMOVAL_IRQ,
+ PALMAS_RESET_IN_IRQ,
+ PALMAS_FBI_BB_IRQ,
+ PALMAS_SHORT_IRQ,
+ PALMAS_VAC_ACOK_IRQ,
+ /* INT3 registers */
+ PALMAS_GPADC_AUTO_0_IRQ,
+ PALMAS_GPADC_AUTO_1_IRQ,
+ PALMAS_GPADC_EOC_SW_IRQ,
+ PALMAS_GPADC_EOC_RT_IRQ,
+ PALMAS_ID_OTG_IRQ,
+ PALMAS_ID_IRQ,
+ PALMAS_VBUS_OTG_IRQ,
+ PALMAS_VBUS_IRQ,
+ /* INT4 registers */
+ PALMAS_GPIO_0_IRQ,
+ PALMAS_GPIO_1_IRQ,
+ PALMAS_GPIO_2_IRQ,
+ PALMAS_GPIO_3_IRQ,
+ PALMAS_GPIO_4_IRQ,
+ PALMAS_GPIO_5_IRQ,
+ PALMAS_GPIO_6_IRQ,
+ PALMAS_GPIO_7_IRQ,
+ /* Total Number IRQs */
+ PALMAS_NUM_IRQ,
+};
+
+enum palmas_regulators {
+ /* SMPS regulators */
+ PALMAS_REG_SMPS12,
+ PALMAS_REG_SMPS123,
+ PALMAS_REG_SMPS3,
+ PALMAS_REG_SMPS45,
+ PALMAS_REG_SMPS457,
+ PALMAS_REG_SMPS6,
+ PALMAS_REG_SMPS7,
+ PALMAS_REG_SMPS8,
+ PALMAS_REG_SMPS9,
+ PALMAS_REG_SMPS10,
+ /* LDO regulators */
+ PALMAS_REG_LDO1,
+ PALMAS_REG_LDO2,
+ PALMAS_REG_LDO3,
+ PALMAS_REG_LDO4,
+ PALMAS_REG_LDO5,
+ PALMAS_REG_LDO6,
+ PALMAS_REG_LDO7,
+ PALMAS_REG_LDO8,
+ PALMAS_REG_LDO9,
+ PALMAS_REG_LDOLN,
+ PALMAS_REG_LDOUSB,
+ /* Total number of regulators */
+ PALMAS_NUM_REGS,
+};
+
+struct palmas_pmic {
+ struct palmas *palmas;
+ struct device *dev;
+ struct regulator_desc desc[PALMAS_NUM_REGS];
+ struct regulator_dev *rdev[PALMAS_NUM_REGS];
+ struct mutex mutex;
+
+ int smps123;
+ int smps457;
+
+ int range[PALMAS_REG_SMPS10];
+};
+
+/* defines so we can store the mux settings */
+#define PALMAS_GPIO_0_MUXED (1 << 0)
+#define PALMAS_GPIO_1_MUXED (1 << 1)
+#define PALMAS_GPIO_2_MUXED (1 << 2)
+#define PALMAS_GPIO_3_MUXED (1 << 3)
+#define PALMAS_GPIO_4_MUXED (1 << 4)
+#define PALMAS_GPIO_5_MUXED (1 << 5)
+#define PALMAS_GPIO_6_MUXED (1 << 6)
+#define PALMAS_GPIO_7_MUXED (1 << 7)
+
+#define PALMAS_LED1_MUXED (1 << 0)
+#define PALMAS_LED2_MUXED (1 << 1)
+
+#define PALMAS_PWM1_MUXED (1 << 0)
+#define PALMAS_PWM2_MUXED (1 << 1)
+
+/* helper macro to get correct slave number */
+#define PALMAS_BASE_TO_SLAVE(x) ((x >> 8) - 1)
+#define PALMAS_BASE_TO_REG(x, y) ((x & 0xff) + y)
+
+/* Base addresses of IP blocks in Palmas */
+#define PALMAS_SMPS_DVS_BASE 0x20
+#define PALMAS_RTC_BASE 0x100
+#define PALMAS_VALIDITY_BASE 0x118
+#define PALMAS_SMPS_BASE 0x120
+#define PALMAS_LDO_BASE 0x150
+#define PALMAS_DVFS_BASE 0x180
+#define PALMAS_PMU_CONTROL_BASE 0x1A0
+#define PALMAS_RESOURCE_BASE 0x1D4
+#define PALMAS_PU_PD_OD_BASE 0x1F4
+#define PALMAS_LED_BASE 0x200
+#define PALMAS_INTERRUPT_BASE 0x210
+#define PALMAS_USB_OTG_BASE 0x250
+#define PALMAS_VIBRATOR_BASE 0x270
+#define PALMAS_GPIO_BASE 0x280
+#define PALMAS_USB_BASE 0x290
+#define PALMAS_GPADC_BASE 0x2C0
+#define PALMAS_TRIM_GPADC_BASE 0x3CD
+
+/* Registers for function RTC */
+#define PALMAS_SECONDS_REG 0x0
+#define PALMAS_MINUTES_REG 0x1
+#define PALMAS_HOURS_REG 0x2
+#define PALMAS_DAYS_REG 0x3
+#define PALMAS_MONTHS_REG 0x4
+#define PALMAS_YEARS_REG 0x5
+#define PALMAS_WEEKS_REG 0x6
+#define PALMAS_ALARM_SECONDS_REG 0x8
+#define PALMAS_ALARM_MINUTES_REG 0x9
+#define PALMAS_ALARM_HOURS_REG 0xA
+#define PALMAS_ALARM_DAYS_REG 0xB
+#define PALMAS_ALARM_MONTHS_REG 0xC
+#define PALMAS_ALARM_YEARS_REG 0xD
+#define PALMAS_RTC_CTRL_REG 0x10
+#define PALMAS_RTC_STATUS_REG 0x11
+#define PALMAS_RTC_INTERRUPTS_REG 0x12
+#define PALMAS_RTC_COMP_LSB_REG 0x13
+#define PALMAS_RTC_COMP_MSB_REG 0x14
+#define PALMAS_RTC_RES_PROG_REG 0x15
+#define PALMAS_RTC_RESET_STATUS_REG 0x16
+
+/* Bit definitions for SECONDS_REG */
+#define PALMAS_SECONDS_REG_SEC1_MASK 0x70
+#define PALMAS_SECONDS_REG_SEC1_SHIFT 4
+#define PALMAS_SECONDS_REG_SEC0_MASK 0x0f
+#define PALMAS_SECONDS_REG_SEC0_SHIFT 0
+
+/* Bit definitions for MINUTES_REG */
+#define PALMAS_MINUTES_REG_MIN1_MASK 0x70
+#define PALMAS_MINUTES_REG_MIN1_SHIFT 4
+#define PALMAS_MINUTES_REG_MIN0_MASK 0x0f
+#define PALMAS_MINUTES_REG_MIN0_SHIFT 0
+
+/* Bit definitions for HOURS_REG */
+#define PALMAS_HOURS_REG_PM_NAM 0x80
+#define PALMAS_HOURS_REG_PM_NAM_SHIFT 7
+#define PALMAS_HOURS_REG_HOUR1_MASK 0x30
+#define PALMAS_HOURS_REG_HOUR1_SHIFT 4
+#define PALMAS_HOURS_REG_HOUR0_MASK 0x0f
+#define PALMAS_HOURS_REG_HOUR0_SHIFT 0
+
+/* Bit definitions for DAYS_REG */
+#define PALMAS_DAYS_REG_DAY1_MASK 0x30
+#define PALMAS_DAYS_REG_DAY1_SHIFT 4
+#define PALMAS_DAYS_REG_DAY0_MASK 0x0f
+#define PALMAS_DAYS_REG_DAY0_SHIFT 0
+
+/* Bit definitions for MONTHS_REG */
+#define PALMAS_MONTHS_REG_MONTH1 0x10
+#define PALMAS_MONTHS_REG_MONTH1_SHIFT 4
+#define PALMAS_MONTHS_REG_MONTH0_MASK 0x0f
+#define PALMAS_MONTHS_REG_MONTH0_SHIFT 0
+
+/* Bit definitions for YEARS_REG */
+#define PALMAS_YEARS_REG_YEAR1_MASK 0xf0
+#define PALMAS_YEARS_REG_YEAR1_SHIFT 4
+#define PALMAS_YEARS_REG_YEAR0_MASK 0x0f
+#define PALMAS_YEARS_REG_YEAR0_SHIFT 0
+
+/* Bit definitions for WEEKS_REG */
+#define PALMAS_WEEKS_REG_WEEK_MASK 0x07
+#define PALMAS_WEEKS_REG_WEEK_SHIFT 0
+
+/* Bit definitions for ALARM_SECONDS_REG */
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_MASK 0x70
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC1_SHIFT 4
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_MASK 0x0f
+#define PALMAS_ALARM_SECONDS_REG_ALARM_SEC0_SHIFT 0
+
+/* Bit definitions for ALARM_MINUTES_REG */
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_MASK 0x70
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN1_SHIFT 4
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_MASK 0x0f
+#define PALMAS_ALARM_MINUTES_REG_ALARM_MIN0_SHIFT 0
+
+/* Bit definitions for ALARM_HOURS_REG */
+#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM 0x80
+#define PALMAS_ALARM_HOURS_REG_ALARM_PM_NAM_SHIFT 7
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_MASK 0x30
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR1_SHIFT 4
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_MASK 0x0f
+#define PALMAS_ALARM_HOURS_REG_ALARM_HOUR0_SHIFT 0
+
+/* Bit definitions for ALARM_DAYS_REG */
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_MASK 0x30
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY1_SHIFT 4
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_MASK 0x0f
+#define PALMAS_ALARM_DAYS_REG_ALARM_DAY0_SHIFT 0
+
+/* Bit definitions for ALARM_MONTHS_REG */
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1 0x10
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH1_SHIFT 4
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_MASK 0x0f
+#define PALMAS_ALARM_MONTHS_REG_ALARM_MONTH0_SHIFT 0
+
+/* Bit definitions for ALARM_YEARS_REG */
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_MASK 0xf0
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR1_SHIFT 4
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_MASK 0x0f
+#define PALMAS_ALARM_YEARS_REG_ALARM_YEAR0_SHIFT 0
+
+/* Bit definitions for RTC_CTRL_REG */
+#define PALMAS_RTC_CTRL_REG_RTC_V_OPT 0x80
+#define PALMAS_RTC_CTRL_REG_RTC_V_OPT_SHIFT 7
+#define PALMAS_RTC_CTRL_REG_GET_TIME 0x40
+#define PALMAS_RTC_CTRL_REG_GET_TIME_SHIFT 6
+#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER 0x20
+#define PALMAS_RTC_CTRL_REG_SET_32_COUNTER_SHIFT 5
+#define PALMAS_RTC_CTRL_REG_TEST_MODE 0x10
+#define PALMAS_RTC_CTRL_REG_TEST_MODE_SHIFT 4
+#define PALMAS_RTC_CTRL_REG_MODE_12_24 0x08
+#define PALMAS_RTC_CTRL_REG_MODE_12_24_SHIFT 3
+#define PALMAS_RTC_CTRL_REG_AUTO_COMP 0x04
+#define PALMAS_RTC_CTRL_REG_AUTO_COMP_SHIFT 2
+#define PALMAS_RTC_CTRL_REG_ROUND_30S 0x02
+#define PALMAS_RTC_CTRL_REG_ROUND_30S_SHIFT 1
+#define PALMAS_RTC_CTRL_REG_STOP_RTC 0x01
+#define PALMAS_RTC_CTRL_REG_STOP_RTC_SHIFT 0
+
+/* Bit definitions for RTC_STATUS_REG */
+#define PALMAS_RTC_STATUS_REG_POWER_UP 0x80
+#define PALMAS_RTC_STATUS_REG_POWER_UP_SHIFT 7
+#define PALMAS_RTC_STATUS_REG_ALARM 0x40
+#define PALMAS_RTC_STATUS_REG_ALARM_SHIFT 6
+#define PALMAS_RTC_STATUS_REG_EVENT_1D 0x20
+#define PALMAS_RTC_STATUS_REG_EVENT_1D_SHIFT 5
+#define PALMAS_RTC_STATUS_REG_EVENT_1H 0x10
+#define PALMAS_RTC_STATUS_REG_EVENT_1H_SHIFT 4
+#define PALMAS_RTC_STATUS_REG_EVENT_1M 0x08
+#define PALMAS_RTC_STATUS_REG_EVENT_1M_SHIFT 3
+#define PALMAS_RTC_STATUS_REG_EVENT_1S 0x04
+#define PALMAS_RTC_STATUS_REG_EVENT_1S_SHIFT 2
+#define PALMAS_RTC_STATUS_REG_RUN 0x02
+#define PALMAS_RTC_STATUS_REG_RUN_SHIFT 1
+
+/* Bit definitions for RTC_INTERRUPTS_REG */
+#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN 0x10
+#define PALMAS_RTC_INTERRUPTS_REG_IT_SLEEP_MASK_EN_SHIFT 4
+#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM 0x08
+#define PALMAS_RTC_INTERRUPTS_REG_IT_ALARM_SHIFT 3
+#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER 0x04
+#define PALMAS_RTC_INTERRUPTS_REG_IT_TIMER_SHIFT 2
+#define PALMAS_RTC_INTERRUPTS_REG_EVERY_MASK 0x03
+#define PALMAS_RTC_INTERRUPTS_REG_EVERY_SHIFT 0
+
+/* Bit definitions for RTC_COMP_LSB_REG */
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_MASK 0xff
+#define PALMAS_RTC_COMP_LSB_REG_RTC_COMP_LSB_SHIFT 0
+
+/* Bit definitions for RTC_COMP_MSB_REG */
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_MASK 0xff
+#define PALMAS_RTC_COMP_MSB_REG_RTC_COMP_MSB_SHIFT 0
+
+/* Bit definitions for RTC_RES_PROG_REG */
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_MASK 0x3f
+#define PALMAS_RTC_RES_PROG_REG_SW_RES_PROG_SHIFT 0
+
+/* Bit definitions for RTC_RESET_STATUS_REG */
+#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS 0x01
+#define PALMAS_RTC_RESET_STATUS_REG_RESET_STATUS_SHIFT 0
+
+/* Registers for function BACKUP */
+#define PALMAS_BACKUP0 0x0
+#define PALMAS_BACKUP1 0x1
+#define PALMAS_BACKUP2 0x2
+#define PALMAS_BACKUP3 0x3
+#define PALMAS_BACKUP4 0x4
+#define PALMAS_BACKUP5 0x5
+#define PALMAS_BACKUP6 0x6
+#define PALMAS_BACKUP7 0x7
+
+/* Bit definitions for BACKUP0 */
+#define PALMAS_BACKUP0_BACKUP_MASK 0xff
+#define PALMAS_BACKUP0_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP1 */
+#define PALMAS_BACKUP1_BACKUP_MASK 0xff
+#define PALMAS_BACKUP1_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP2 */
+#define PALMAS_BACKUP2_BACKUP_MASK 0xff
+#define PALMAS_BACKUP2_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP3 */
+#define PALMAS_BACKUP3_BACKUP_MASK 0xff
+#define PALMAS_BACKUP3_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP4 */
+#define PALMAS_BACKUP4_BACKUP_MASK 0xff
+#define PALMAS_BACKUP4_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP5 */
+#define PALMAS_BACKUP5_BACKUP_MASK 0xff
+#define PALMAS_BACKUP5_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP6 */
+#define PALMAS_BACKUP6_BACKUP_MASK 0xff
+#define PALMAS_BACKUP6_BACKUP_SHIFT 0
+
+/* Bit definitions for BACKUP7 */
+#define PALMAS_BACKUP7_BACKUP_MASK 0xff
+#define PALMAS_BACKUP7_BACKUP_SHIFT 0
+
+/* Registers for function SMPS */
+#define PALMAS_SMPS12_CTRL 0x0
+#define PALMAS_SMPS12_TSTEP 0x1
+#define PALMAS_SMPS12_FORCE 0x2
+#define PALMAS_SMPS12_VOLTAGE 0x3
+#define PALMAS_SMPS3_CTRL 0x4
+#define PALMAS_SMPS3_VOLTAGE 0x7
+#define PALMAS_SMPS45_CTRL 0x8
+#define PALMAS_SMPS45_TSTEP 0x9
+#define PALMAS_SMPS45_FORCE 0xA
+#define PALMAS_SMPS45_VOLTAGE 0xB
+#define PALMAS_SMPS6_CTRL 0xC
+#define PALMAS_SMPS6_TSTEP 0xD
+#define PALMAS_SMPS6_FORCE 0xE
+#define PALMAS_SMPS6_VOLTAGE 0xF
+#define PALMAS_SMPS7_CTRL 0x10
+#define PALMAS_SMPS7_VOLTAGE 0x13
+#define PALMAS_SMPS8_CTRL 0x14
+#define PALMAS_SMPS8_TSTEP 0x15
+#define PALMAS_SMPS8_FORCE 0x16
+#define PALMAS_SMPS8_VOLTAGE 0x17
+#define PALMAS_SMPS9_CTRL 0x18
+#define PALMAS_SMPS9_VOLTAGE 0x1B
+#define PALMAS_SMPS10_CTRL 0x1C
+#define PALMAS_SMPS10_STATUS 0x1F
+#define PALMAS_SMPS_CTRL 0x24
+#define PALMAS_SMPS_PD_CTRL 0x25
+#define PALMAS_SMPS_DITHER_EN 0x26
+#define PALMAS_SMPS_THERMAL_EN 0x27
+#define PALMAS_SMPS_THERMAL_STATUS 0x28
+#define PALMAS_SMPS_SHORT_STATUS 0x29
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN 0x2A
+#define PALMAS_SMPS_POWERGOOD_MASK1 0x2B
+#define PALMAS_SMPS_POWERGOOD_MASK2 0x2C
+
+/* Bit definitions for SMPS12_CTRL */
+#define PALMAS_SMPS12_CTRL_WR_S 0x80
+#define PALMAS_SMPS12_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN 0x40
+#define PALMAS_SMPS12_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS12_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS12_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS12_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS12_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS12_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS12_TSTEP */
+#define PALMAS_SMPS12_TSTEP_TSTEP_MASK 0x03
+#define PALMAS_SMPS12_TSTEP_TSTEP_SHIFT 0
+
+/* Bit definitions for SMPS12_FORCE */
+#define PALMAS_SMPS12_FORCE_CMD 0x80
+#define PALMAS_SMPS12_FORCE_CMD_SHIFT 7
+#define PALMAS_SMPS12_FORCE_VSEL_MASK 0x7f
+#define PALMAS_SMPS12_FORCE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS12_VOLTAGE */
+#define PALMAS_SMPS12_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS12_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS12_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS12_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS3_CTRL */
+#define PALMAS_SMPS3_CTRL_WR_S 0x80
+#define PALMAS_SMPS3_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS3_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS3_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS3_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS3_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS3_VOLTAGE */
+#define PALMAS_SMPS3_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS3_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS3_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS3_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS45_CTRL */
+#define PALMAS_SMPS45_CTRL_WR_S 0x80
+#define PALMAS_SMPS45_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN 0x40
+#define PALMAS_SMPS45_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS45_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS45_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS45_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS45_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS45_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS45_TSTEP */
+#define PALMAS_SMPS45_TSTEP_TSTEP_MASK 0x03
+#define PALMAS_SMPS45_TSTEP_TSTEP_SHIFT 0
+
+/* Bit definitions for SMPS45_FORCE */
+#define PALMAS_SMPS45_FORCE_CMD 0x80
+#define PALMAS_SMPS45_FORCE_CMD_SHIFT 7
+#define PALMAS_SMPS45_FORCE_VSEL_MASK 0x7f
+#define PALMAS_SMPS45_FORCE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS45_VOLTAGE */
+#define PALMAS_SMPS45_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS45_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS45_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS45_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS6_CTRL */
+#define PALMAS_SMPS6_CTRL_WR_S 0x80
+#define PALMAS_SMPS6_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN 0x40
+#define PALMAS_SMPS6_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS6_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS6_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS6_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS6_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS6_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS6_TSTEP */
+#define PALMAS_SMPS6_TSTEP_TSTEP_MASK 0x03
+#define PALMAS_SMPS6_TSTEP_TSTEP_SHIFT 0
+
+/* Bit definitions for SMPS6_FORCE */
+#define PALMAS_SMPS6_FORCE_CMD 0x80
+#define PALMAS_SMPS6_FORCE_CMD_SHIFT 7
+#define PALMAS_SMPS6_FORCE_VSEL_MASK 0x7f
+#define PALMAS_SMPS6_FORCE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS6_VOLTAGE */
+#define PALMAS_SMPS6_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS6_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS6_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS6_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS7_CTRL */
+#define PALMAS_SMPS7_CTRL_WR_S 0x80
+#define PALMAS_SMPS7_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS7_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS7_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS7_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS7_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS7_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS7_VOLTAGE */
+#define PALMAS_SMPS7_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS7_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS7_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS7_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS8_CTRL */
+#define PALMAS_SMPS8_CTRL_WR_S 0x80
+#define PALMAS_SMPS8_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN 0x40
+#define PALMAS_SMPS8_CTRL_ROOF_FLOOR_EN_SHIFT 6
+#define PALMAS_SMPS8_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS8_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS8_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS8_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS8_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS8_TSTEP */
+#define PALMAS_SMPS8_TSTEP_TSTEP_MASK 0x03
+#define PALMAS_SMPS8_TSTEP_TSTEP_SHIFT 0
+
+/* Bit definitions for SMPS8_FORCE */
+#define PALMAS_SMPS8_FORCE_CMD 0x80
+#define PALMAS_SMPS8_FORCE_CMD_SHIFT 7
+#define PALMAS_SMPS8_FORCE_VSEL_MASK 0x7f
+#define PALMAS_SMPS8_FORCE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS8_VOLTAGE */
+#define PALMAS_SMPS8_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS8_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS8_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS8_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS9_CTRL */
+#define PALMAS_SMPS9_CTRL_WR_S 0x80
+#define PALMAS_SMPS9_CTRL_WR_S_SHIFT 7
+#define PALMAS_SMPS9_CTRL_STATUS_MASK 0x30
+#define PALMAS_SMPS9_CTRL_STATUS_SHIFT 4
+#define PALMAS_SMPS9_CTRL_MODE_SLEEP_MASK 0x0c
+#define PALMAS_SMPS9_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_MASK 0x03
+#define PALMAS_SMPS9_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS9_VOLTAGE */
+#define PALMAS_SMPS9_VOLTAGE_RANGE 0x80
+#define PALMAS_SMPS9_VOLTAGE_RANGE_SHIFT 7
+#define PALMAS_SMPS9_VOLTAGE_VSEL_MASK 0x7f
+#define PALMAS_SMPS9_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for SMPS10_CTRL */
+#define PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK 0xf0
+#define PALMAS_SMPS10_CTRL_MODE_SLEEP_SHIFT 4
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_MASK 0x0f
+#define PALMAS_SMPS10_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SMPS10_STATUS */
+#define PALMAS_SMPS10_STATUS_STATUS_MASK 0x0f
+#define PALMAS_SMPS10_STATUS_STATUS_SHIFT 0
+
+/* Bit definitions for SMPS_CTRL */
+#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN 0x20
+#define PALMAS_SMPS_CTRL_SMPS45_SMPS457_EN_SHIFT 5
+#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN 0x10
+#define PALMAS_SMPS_CTRL_SMPS12_SMPS123_EN_SHIFT 4
+#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_MASK 0x0c
+#define PALMAS_SMPS_CTRL_SMPS45_PHASE_CTRL_SHIFT 2
+#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_MASK 0x03
+#define PALMAS_SMPS_CTRL_SMPS123_PHASE_CTRL_SHIFT 0
+
+/* Bit definitions for SMPS_PD_CTRL */
+#define PALMAS_SMPS_PD_CTRL_SMPS9 0x40
+#define PALMAS_SMPS_PD_CTRL_SMPS9_SHIFT 6
+#define PALMAS_SMPS_PD_CTRL_SMPS8 0x20
+#define PALMAS_SMPS_PD_CTRL_SMPS8_SHIFT 5
+#define PALMAS_SMPS_PD_CTRL_SMPS7 0x10
+#define PALMAS_SMPS_PD_CTRL_SMPS7_SHIFT 4
+#define PALMAS_SMPS_PD_CTRL_SMPS6 0x08
+#define PALMAS_SMPS_PD_CTRL_SMPS6_SHIFT 3
+#define PALMAS_SMPS_PD_CTRL_SMPS45 0x04
+#define PALMAS_SMPS_PD_CTRL_SMPS45_SHIFT 2
+#define PALMAS_SMPS_PD_CTRL_SMPS3 0x02
+#define PALMAS_SMPS_PD_CTRL_SMPS3_SHIFT 1
+#define PALMAS_SMPS_PD_CTRL_SMPS12 0x01
+#define PALMAS_SMPS_PD_CTRL_SMPS12_SHIFT 0
+
+/* Bit definitions for SMPS_THERMAL_EN */
+#define PALMAS_SMPS_THERMAL_EN_SMPS9 0x40
+#define PALMAS_SMPS_THERMAL_EN_SMPS9_SHIFT 6
+#define PALMAS_SMPS_THERMAL_EN_SMPS8 0x20
+#define PALMAS_SMPS_THERMAL_EN_SMPS8_SHIFT 5
+#define PALMAS_SMPS_THERMAL_EN_SMPS6 0x08
+#define PALMAS_SMPS_THERMAL_EN_SMPS6_SHIFT 3
+#define PALMAS_SMPS_THERMAL_EN_SMPS457 0x04
+#define PALMAS_SMPS_THERMAL_EN_SMPS457_SHIFT 2
+#define PALMAS_SMPS_THERMAL_EN_SMPS123 0x01
+#define PALMAS_SMPS_THERMAL_EN_SMPS123_SHIFT 0
+
+/* Bit definitions for SMPS_THERMAL_STATUS */
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS9 0x40
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS9_SHIFT 6
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS8 0x20
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS8_SHIFT 5
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS6 0x08
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS6_SHIFT 3
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS457 0x04
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS457_SHIFT 2
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS123 0x01
+#define PALMAS_SMPS_THERMAL_STATUS_SMPS123_SHIFT 0
+
+/* Bit definitions for SMPS_SHORT_STATUS */
+#define PALMAS_SMPS_SHORT_STATUS_SMPS10 0x80
+#define PALMAS_SMPS_SHORT_STATUS_SMPS10_SHIFT 7
+#define PALMAS_SMPS_SHORT_STATUS_SMPS9 0x40
+#define PALMAS_SMPS_SHORT_STATUS_SMPS9_SHIFT 6
+#define PALMAS_SMPS_SHORT_STATUS_SMPS8 0x20
+#define PALMAS_SMPS_SHORT_STATUS_SMPS8_SHIFT 5
+#define PALMAS_SMPS_SHORT_STATUS_SMPS7 0x10
+#define PALMAS_SMPS_SHORT_STATUS_SMPS7_SHIFT 4
+#define PALMAS_SMPS_SHORT_STATUS_SMPS6 0x08
+#define PALMAS_SMPS_SHORT_STATUS_SMPS6_SHIFT 3
+#define PALMAS_SMPS_SHORT_STATUS_SMPS45 0x04
+#define PALMAS_SMPS_SHORT_STATUS_SMPS45_SHIFT 2
+#define PALMAS_SMPS_SHORT_STATUS_SMPS3 0x02
+#define PALMAS_SMPS_SHORT_STATUS_SMPS3_SHIFT 1
+#define PALMAS_SMPS_SHORT_STATUS_SMPS12 0x01
+#define PALMAS_SMPS_SHORT_STATUS_SMPS12_SHIFT 0
+
+/* Bit definitions for SMPS_NEGATIVE_CURRENT_LIMIT_EN */
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9 0x40
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS9_SHIFT 6
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8 0x20
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS8_SHIFT 5
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7 0x10
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS7_SHIFT 4
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6 0x08
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS6_SHIFT 3
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45 0x04
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS45_SHIFT 2
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3 0x02
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS3_SHIFT 1
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12 0x01
+#define PALMAS_SMPS_NEGATIVE_CURRENT_LIMIT_EN_SMPS12_SHIFT 0
+
+/* Bit definitions for SMPS_POWERGOOD_MASK1 */
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10 0x80
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS10_SHIFT 7
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9 0x40
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS9_SHIFT 6
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8 0x20
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS8_SHIFT 5
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7 0x10
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS7_SHIFT 4
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6 0x08
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS6_SHIFT 3
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45 0x04
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS45_SHIFT 2
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3 0x02
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS3_SHIFT 1
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12 0x01
+#define PALMAS_SMPS_POWERGOOD_MASK1_SMPS12_SHIFT 0
+
+/* Bit definitions for SMPS_POWERGOOD_MASK2 */
+#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT 0x80
+#define PALMAS_SMPS_POWERGOOD_MASK2_POWERGOOD_TYPE_SELECT_SHIFT 7
+#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7 0x04
+#define PALMAS_SMPS_POWERGOOD_MASK2_GPIO_7_SHIFT 2
+#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS 0x02
+#define PALMAS_SMPS_POWERGOOD_MASK2_VBUS_SHIFT 1
+#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK 0x01
+#define PALMAS_SMPS_POWERGOOD_MASK2_ACOK_SHIFT 0
+
+/* Registers for function LDO */
+#define PALMAS_LDO1_CTRL 0x0
+#define PALMAS_LDO1_VOLTAGE 0x1
+#define PALMAS_LDO2_CTRL 0x2
+#define PALMAS_LDO2_VOLTAGE 0x3
+#define PALMAS_LDO3_CTRL 0x4
+#define PALMAS_LDO3_VOLTAGE 0x5
+#define PALMAS_LDO4_CTRL 0x6
+#define PALMAS_LDO4_VOLTAGE 0x7
+#define PALMAS_LDO5_CTRL 0x8
+#define PALMAS_LDO5_VOLTAGE 0x9
+#define PALMAS_LDO6_CTRL 0xA
+#define PALMAS_LDO6_VOLTAGE 0xB
+#define PALMAS_LDO7_CTRL 0xC
+#define PALMAS_LDO7_VOLTAGE 0xD
+#define PALMAS_LDO8_CTRL 0xE
+#define PALMAS_LDO8_VOLTAGE 0xF
+#define PALMAS_LDO9_CTRL 0x10
+#define PALMAS_LDO9_VOLTAGE 0x11
+#define PALMAS_LDOLN_CTRL 0x12
+#define PALMAS_LDOLN_VOLTAGE 0x13
+#define PALMAS_LDOUSB_CTRL 0x14
+#define PALMAS_LDOUSB_VOLTAGE 0x15
+#define PALMAS_LDO_CTRL 0x1A
+#define PALMAS_LDO_PD_CTRL1 0x1B
+#define PALMAS_LDO_PD_CTRL2 0x1C
+#define PALMAS_LDO_SHORT_STATUS1 0x1D
+#define PALMAS_LDO_SHORT_STATUS2 0x1E
+
+/* Bit definitions for LDO1_CTRL */
+#define PALMAS_LDO1_CTRL_WR_S 0x80
+#define PALMAS_LDO1_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO1_CTRL_STATUS 0x10
+#define PALMAS_LDO1_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO1_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO1_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO1_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO1_VOLTAGE */
+#define PALMAS_LDO1_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO1_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO2_CTRL */
+#define PALMAS_LDO2_CTRL_WR_S 0x80
+#define PALMAS_LDO2_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO2_CTRL_STATUS 0x10
+#define PALMAS_LDO2_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO2_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO2_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO2_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO2_VOLTAGE */
+#define PALMAS_LDO2_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO2_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO3_CTRL */
+#define PALMAS_LDO3_CTRL_WR_S 0x80
+#define PALMAS_LDO3_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO3_CTRL_STATUS 0x10
+#define PALMAS_LDO3_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO3_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO3_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO3_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO3_VOLTAGE */
+#define PALMAS_LDO3_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO3_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO4_CTRL */
+#define PALMAS_LDO4_CTRL_WR_S 0x80
+#define PALMAS_LDO4_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO4_CTRL_STATUS 0x10
+#define PALMAS_LDO4_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO4_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO4_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO4_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO4_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO4_VOLTAGE */
+#define PALMAS_LDO4_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO4_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO5_CTRL */
+#define PALMAS_LDO5_CTRL_WR_S 0x80
+#define PALMAS_LDO5_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO5_CTRL_STATUS 0x10
+#define PALMAS_LDO5_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO5_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO5_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO5_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO5_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO5_VOLTAGE */
+#define PALMAS_LDO5_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO5_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO6_CTRL */
+#define PALMAS_LDO6_CTRL_WR_S 0x80
+#define PALMAS_LDO6_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO6_CTRL_LDO_VIB_EN 0x40
+#define PALMAS_LDO6_CTRL_LDO_VIB_EN_SHIFT 6
+#define PALMAS_LDO6_CTRL_STATUS 0x10
+#define PALMAS_LDO6_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO6_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO6_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO6_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO6_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO6_VOLTAGE */
+#define PALMAS_LDO6_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO6_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO7_CTRL */
+#define PALMAS_LDO7_CTRL_WR_S 0x80
+#define PALMAS_LDO7_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO7_CTRL_STATUS 0x10
+#define PALMAS_LDO7_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO7_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO7_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO7_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO7_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO7_VOLTAGE */
+#define PALMAS_LDO7_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO7_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO8_CTRL */
+#define PALMAS_LDO8_CTRL_WR_S 0x80
+#define PALMAS_LDO8_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN 0x40
+#define PALMAS_LDO8_CTRL_LDO_TRACKING_EN_SHIFT 6
+#define PALMAS_LDO8_CTRL_STATUS 0x10
+#define PALMAS_LDO8_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO8_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO8_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO8_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO8_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO8_VOLTAGE */
+#define PALMAS_LDO8_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO8_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO9_CTRL */
+#define PALMAS_LDO9_CTRL_WR_S 0x80
+#define PALMAS_LDO9_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN 0x40
+#define PALMAS_LDO9_CTRL_LDO_BYPASS_EN_SHIFT 6
+#define PALMAS_LDO9_CTRL_STATUS 0x10
+#define PALMAS_LDO9_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDO9_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDO9_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDO9_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDO9_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDO9_VOLTAGE */
+#define PALMAS_LDO9_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDO9_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDOLN_CTRL */
+#define PALMAS_LDOLN_CTRL_WR_S 0x80
+#define PALMAS_LDOLN_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDOLN_CTRL_STATUS 0x10
+#define PALMAS_LDOLN_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDOLN_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDOLN_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDOLN_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDOLN_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDOLN_VOLTAGE */
+#define PALMAS_LDOLN_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDOLN_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDOUSB_CTRL */
+#define PALMAS_LDOUSB_CTRL_WR_S 0x80
+#define PALMAS_LDOUSB_CTRL_WR_S_SHIFT 7
+#define PALMAS_LDOUSB_CTRL_STATUS 0x10
+#define PALMAS_LDOUSB_CTRL_STATUS_SHIFT 4
+#define PALMAS_LDOUSB_CTRL_MODE_SLEEP 0x04
+#define PALMAS_LDOUSB_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_LDOUSB_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for LDOUSB_VOLTAGE */
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_MASK 0x3f
+#define PALMAS_LDOUSB_VOLTAGE_VSEL_SHIFT 0
+
+/* Bit definitions for LDO_CTRL */
+#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS 0x01
+#define PALMAS_LDO_CTRL_LDOUSB_ON_VBUS_VSYS_SHIFT 0
+
+/* Bit definitions for LDO_PD_CTRL1 */
+#define PALMAS_LDO_PD_CTRL1_LDO8 0x80
+#define PALMAS_LDO_PD_CTRL1_LDO8_SHIFT 7
+#define PALMAS_LDO_PD_CTRL1_LDO7 0x40
+#define PALMAS_LDO_PD_CTRL1_LDO7_SHIFT 6
+#define PALMAS_LDO_PD_CTRL1_LDO6 0x20
+#define PALMAS_LDO_PD_CTRL1_LDO6_SHIFT 5
+#define PALMAS_LDO_PD_CTRL1_LDO5 0x10
+#define PALMAS_LDO_PD_CTRL1_LDO5_SHIFT 4
+#define PALMAS_LDO_PD_CTRL1_LDO4 0x08
+#define PALMAS_LDO_PD_CTRL1_LDO4_SHIFT 3
+#define PALMAS_LDO_PD_CTRL1_LDO3 0x04
+#define PALMAS_LDO_PD_CTRL1_LDO3_SHIFT 2
+#define PALMAS_LDO_PD_CTRL1_LDO2 0x02
+#define PALMAS_LDO_PD_CTRL1_LDO2_SHIFT 1
+#define PALMAS_LDO_PD_CTRL1_LDO1 0x01
+#define PALMAS_LDO_PD_CTRL1_LDO1_SHIFT 0
+
+/* Bit definitions for LDO_PD_CTRL2 */
+#define PALMAS_LDO_PD_CTRL2_LDOUSB 0x04
+#define PALMAS_LDO_PD_CTRL2_LDOUSB_SHIFT 2
+#define PALMAS_LDO_PD_CTRL2_LDOLN 0x02
+#define PALMAS_LDO_PD_CTRL2_LDOLN_SHIFT 1
+#define PALMAS_LDO_PD_CTRL2_LDO9 0x01
+#define PALMAS_LDO_PD_CTRL2_LDO9_SHIFT 0
+
+/* Bit definitions for LDO_SHORT_STATUS1 */
+#define PALMAS_LDO_SHORT_STATUS1_LDO8 0x80
+#define PALMAS_LDO_SHORT_STATUS1_LDO8_SHIFT 7
+#define PALMAS_LDO_SHORT_STATUS1_LDO7 0x40
+#define PALMAS_LDO_SHORT_STATUS1_LDO7_SHIFT 6
+#define PALMAS_LDO_SHORT_STATUS1_LDO6 0x20
+#define PALMAS_LDO_SHORT_STATUS1_LDO6_SHIFT 5
+#define PALMAS_LDO_SHORT_STATUS1_LDO5 0x10
+#define PALMAS_LDO_SHORT_STATUS1_LDO5_SHIFT 4
+#define PALMAS_LDO_SHORT_STATUS1_LDO4 0x08
+#define PALMAS_LDO_SHORT_STATUS1_LDO4_SHIFT 3
+#define PALMAS_LDO_SHORT_STATUS1_LDO3 0x04
+#define PALMAS_LDO_SHORT_STATUS1_LDO3_SHIFT 2
+#define PALMAS_LDO_SHORT_STATUS1_LDO2 0x02
+#define PALMAS_LDO_SHORT_STATUS1_LDO2_SHIFT 1
+#define PALMAS_LDO_SHORT_STATUS1_LDO1 0x01
+#define PALMAS_LDO_SHORT_STATUS1_LDO1_SHIFT 0
+
+/* Bit definitions for LDO_SHORT_STATUS2 */
+#define PALMAS_LDO_SHORT_STATUS2_LDOVANA 0x08
+#define PALMAS_LDO_SHORT_STATUS2_LDOVANA_SHIFT 3
+#define PALMAS_LDO_SHORT_STATUS2_LDOUSB 0x04
+#define PALMAS_LDO_SHORT_STATUS2_LDOUSB_SHIFT 2
+#define PALMAS_LDO_SHORT_STATUS2_LDOLN 0x02
+#define PALMAS_LDO_SHORT_STATUS2_LDOLN_SHIFT 1
+#define PALMAS_LDO_SHORT_STATUS2_LDO9 0x01
+#define PALMAS_LDO_SHORT_STATUS2_LDO9_SHIFT 0
+
+/* Registers for function PMU_CONTROL */
+#define PALMAS_DEV_CTRL 0x0
+#define PALMAS_POWER_CTRL 0x1
+#define PALMAS_VSYS_LO 0x2
+#define PALMAS_VSYS_MON 0x3
+#define PALMAS_VBAT_MON 0x4
+#define PALMAS_WATCHDOG 0x5
+#define PALMAS_BOOT_STATUS 0x6
+#define PALMAS_BATTERY_BOUNCE 0x7
+#define PALMAS_BACKUP_BATTERY_CTRL 0x8
+#define PALMAS_LONG_PRESS_KEY 0x9
+#define PALMAS_OSC_THERM_CTRL 0xA
+#define PALMAS_BATDEBOUNCING 0xB
+#define PALMAS_SWOFF_HWRST 0xF
+#define PALMAS_SWOFF_COLDRST 0x10
+#define PALMAS_SWOFF_STATUS 0x11
+#define PALMAS_PMU_CONFIG 0x12
+#define PALMAS_SPARE 0x14
+#define PALMAS_PMU_SECONDARY_INT 0x15
+#define PALMAS_SW_REVISION 0x17
+#define PALMAS_EXT_CHRG_CTRL 0x18
+#define PALMAS_PMU_SECONDARY_INT2 0x19
+
+/* Bit definitions for DEV_CTRL */
+#define PALMAS_DEV_CTRL_DEV_STATUS_MASK 0x0c
+#define PALMAS_DEV_CTRL_DEV_STATUS_SHIFT 2
+#define PALMAS_DEV_CTRL_SW_RST 0x02
+#define PALMAS_DEV_CTRL_SW_RST_SHIFT 1
+#define PALMAS_DEV_CTRL_DEV_ON 0x01
+#define PALMAS_DEV_CTRL_DEV_ON_SHIFT 0
+
+/* Bit definitions for POWER_CTRL */
+#define PALMAS_POWER_CTRL_ENABLE2_MASK 0x04
+#define PALMAS_POWER_CTRL_ENABLE2_MASK_SHIFT 2
+#define PALMAS_POWER_CTRL_ENABLE1_MASK 0x02
+#define PALMAS_POWER_CTRL_ENABLE1_MASK_SHIFT 1
+#define PALMAS_POWER_CTRL_NSLEEP_MASK 0x01
+#define PALMAS_POWER_CTRL_NSLEEP_MASK_SHIFT 0
+
+/* Bit definitions for VSYS_LO */
+#define PALMAS_VSYS_LO_THRESHOLD_MASK 0x1f
+#define PALMAS_VSYS_LO_THRESHOLD_SHIFT 0
+
+/* Bit definitions for VSYS_MON */
+#define PALMAS_VSYS_MON_ENABLE 0x80
+#define PALMAS_VSYS_MON_ENABLE_SHIFT 7
+#define PALMAS_VSYS_MON_THRESHOLD_MASK 0x3f
+#define PALMAS_VSYS_MON_THRESHOLD_SHIFT 0
+
+/* Bit definitions for VBAT_MON */
+#define PALMAS_VBAT_MON_ENABLE 0x80
+#define PALMAS_VBAT_MON_ENABLE_SHIFT 7
+#define PALMAS_VBAT_MON_THRESHOLD_MASK 0x3f
+#define PALMAS_VBAT_MON_THRESHOLD_SHIFT 0
+
+/* Bit definitions for WATCHDOG */
+#define PALMAS_WATCHDOG_LOCK 0x20
+#define PALMAS_WATCHDOG_LOCK_SHIFT 5
+#define PALMAS_WATCHDOG_ENABLE 0x10
+#define PALMAS_WATCHDOG_ENABLE_SHIFT 4
+#define PALMAS_WATCHDOG_MODE 0x08
+#define PALMAS_WATCHDOG_MODE_SHIFT 3
+#define PALMAS_WATCHDOG_TIMER_MASK 0x07
+#define PALMAS_WATCHDOG_TIMER_SHIFT 0
+
+/* Bit definitions for BOOT_STATUS */
+#define PALMAS_BOOT_STATUS_BOOT1 0x02
+#define PALMAS_BOOT_STATUS_BOOT1_SHIFT 1
+#define PALMAS_BOOT_STATUS_BOOT0 0x01
+#define PALMAS_BOOT_STATUS_BOOT0_SHIFT 0
+
+/* Bit definitions for BATTERY_BOUNCE */
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_MASK 0x3f
+#define PALMAS_BATTERY_BOUNCE_BB_DELAY_SHIFT 0
+
+/* Bit definitions for BACKUP_BATTERY_CTRL */
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15 0x80
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_18_15_SHIFT 7
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP 0x40
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_SLP_SHIFT 6
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF 0x20
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_EN_OFF_SHIFT 5
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN 0x10
+#define PALMAS_BACKUP_BATTERY_CTRL_VRTC_PWEN_SHIFT 4
+#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG 0x08
+#define PALMAS_BACKUP_BATTERY_CTRL_BBS_BBC_LOW_ICHRG_SHIFT 3
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_MASK 0x06
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_SEL_SHIFT 1
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN 0x01
+#define PALMAS_BACKUP_BATTERY_CTRL_BB_CHG_EN_SHIFT 0
+
+/* Bit definitions for LONG_PRESS_KEY */
+#define PALMAS_LONG_PRESS_KEY_LPK_LOCK 0x80
+#define PALMAS_LONG_PRESS_KEY_LPK_LOCK_SHIFT 7
+#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR 0x10
+#define PALMAS_LONG_PRESS_KEY_LPK_INT_CLR_SHIFT 4
+#define PALMAS_LONG_PRESS_KEY_LPK_TIME_MASK 0x0c
+#define PALMAS_LONG_PRESS_KEY_LPK_TIME_SHIFT 2
+#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_MASK 0x03
+#define PALMAS_LONG_PRESS_KEY_PWRON_DEBOUNCE_SHIFT 0
+
+/* Bit definitions for OSC_THERM_CTRL */
+#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP 0x80
+#define PALMAS_OSC_THERM_CTRL_VANA_ON_IN_SLEEP_SHIFT 7
+#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP 0x40
+#define PALMAS_OSC_THERM_CTRL_INT_MASK_IN_SLEEP_SHIFT 6
+#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP 0x20
+#define PALMAS_OSC_THERM_CTRL_RC15MHZ_ON_IN_SLEEP_SHIFT 5
+#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP 0x10
+#define PALMAS_OSC_THERM_CTRL_THERM_OFF_IN_SLEEP_SHIFT 4
+#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_MASK 0x0c
+#define PALMAS_OSC_THERM_CTRL_THERM_HD_SEL_SHIFT 2
+#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS 0x02
+#define PALMAS_OSC_THERM_CTRL_OSC_BYPASS_SHIFT 1
+#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE 0x01
+#define PALMAS_OSC_THERM_CTRL_OSC_HPMODE_SHIFT 0
+
+/* Bit definitions for BATDEBOUNCING */
+#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS 0x80
+#define PALMAS_BATDEBOUNCING_BAT_DEB_BYPASS_SHIFT 7
+#define PALMAS_BATDEBOUNCING_BINS_DEB_MASK 0x78
+#define PALMAS_BATDEBOUNCING_BINS_DEB_SHIFT 3
+#define PALMAS_BATDEBOUNCING_BEXT_DEB_MASK 0x07
+#define PALMAS_BATDEBOUNCING_BEXT_DEB_SHIFT 0
+
+/* Bit definitions for SWOFF_HWRST */
+#define PALMAS_SWOFF_HWRST_PWRON_LPK 0x80
+#define PALMAS_SWOFF_HWRST_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_HWRST_PWRDOWN 0x40
+#define PALMAS_SWOFF_HWRST_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_HWRST_WTD 0x20
+#define PALMAS_SWOFF_HWRST_WTD_SHIFT 5
+#define PALMAS_SWOFF_HWRST_TSHUT 0x10
+#define PALMAS_SWOFF_HWRST_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_HWRST_RESET_IN 0x08
+#define PALMAS_SWOFF_HWRST_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_HWRST_SW_RST 0x04
+#define PALMAS_SWOFF_HWRST_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_HWRST_VSYS_LO 0x02
+#define PALMAS_SWOFF_HWRST_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN 0x01
+#define PALMAS_SWOFF_HWRST_GPADC_SHUTDOWN_SHIFT 0
+
+/* Bit definitions for SWOFF_COLDRST */
+#define PALMAS_SWOFF_COLDRST_PWRON_LPK 0x80
+#define PALMAS_SWOFF_COLDRST_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_COLDRST_PWRDOWN 0x40
+#define PALMAS_SWOFF_COLDRST_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_COLDRST_WTD 0x20
+#define PALMAS_SWOFF_COLDRST_WTD_SHIFT 5
+#define PALMAS_SWOFF_COLDRST_TSHUT 0x10
+#define PALMAS_SWOFF_COLDRST_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_COLDRST_RESET_IN 0x08
+#define PALMAS_SWOFF_COLDRST_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_COLDRST_SW_RST 0x04
+#define PALMAS_SWOFF_COLDRST_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_COLDRST_VSYS_LO 0x02
+#define PALMAS_SWOFF_COLDRST_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN 0x01
+#define PALMAS_SWOFF_COLDRST_GPADC_SHUTDOWN_SHIFT 0
+
+/* Bit definitions for SWOFF_STATUS */
+#define PALMAS_SWOFF_STATUS_PWRON_LPK 0x80
+#define PALMAS_SWOFF_STATUS_PWRON_LPK_SHIFT 7
+#define PALMAS_SWOFF_STATUS_PWRDOWN 0x40
+#define PALMAS_SWOFF_STATUS_PWRDOWN_SHIFT 6
+#define PALMAS_SWOFF_STATUS_WTD 0x20
+#define PALMAS_SWOFF_STATUS_WTD_SHIFT 5
+#define PALMAS_SWOFF_STATUS_TSHUT 0x10
+#define PALMAS_SWOFF_STATUS_TSHUT_SHIFT 4
+#define PALMAS_SWOFF_STATUS_RESET_IN 0x08
+#define PALMAS_SWOFF_STATUS_RESET_IN_SHIFT 3
+#define PALMAS_SWOFF_STATUS_SW_RST 0x04
+#define PALMAS_SWOFF_STATUS_SW_RST_SHIFT 2
+#define PALMAS_SWOFF_STATUS_VSYS_LO 0x02
+#define PALMAS_SWOFF_STATUS_VSYS_LO_SHIFT 1
+#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN 0x01
+#define PALMAS_SWOFF_STATUS_GPADC_SHUTDOWN_SHIFT 0
+
+/* Bit definitions for PMU_CONFIG */
+#define PALMAS_PMU_CONFIG_MULTI_CELL_EN 0x40
+#define PALMAS_PMU_CONFIG_MULTI_CELL_EN_SHIFT 6
+#define PALMAS_PMU_CONFIG_SPARE_MASK 0x30
+#define PALMAS_PMU_CONFIG_SPARE_SHIFT 4
+#define PALMAS_PMU_CONFIG_SWOFF_DLY_MASK 0x0c
+#define PALMAS_PMU_CONFIG_SWOFF_DLY_SHIFT 2
+#define PALMAS_PMU_CONFIG_GATE_RESET_OUT 0x02
+#define PALMAS_PMU_CONFIG_GATE_RESET_OUT_SHIFT 1
+#define PALMAS_PMU_CONFIG_AUTODEVON 0x01
+#define PALMAS_PMU_CONFIG_AUTODEVON_SHIFT 0
+
+/* Bit definitions for SPARE */
+#define PALMAS_SPARE_SPARE_MASK 0xf8
+#define PALMAS_SPARE_SPARE_SHIFT 3
+#define PALMAS_SPARE_REGEN3_OD 0x04
+#define PALMAS_SPARE_REGEN3_OD_SHIFT 2
+#define PALMAS_SPARE_REGEN2_OD 0x02
+#define PALMAS_SPARE_REGEN2_OD_SHIFT 1
+#define PALMAS_SPARE_REGEN1_OD 0x01
+#define PALMAS_SPARE_REGEN1_OD_SHIFT 0
+
+/* Bit definitions for PMU_SECONDARY_INT */
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC 0x80
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_INT_SRC_SHIFT 7
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC 0x40
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_INT_SRC_SHIFT 6
+#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC 0x20
+#define PALMAS_PMU_SECONDARY_INT_BB_INT_SRC_SHIFT 5
+#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC 0x10
+#define PALMAS_PMU_SECONDARY_INT_FBI_INT_SRC_SHIFT 4
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK 0x08
+#define PALMAS_PMU_SECONDARY_INT_VBUS_OVV_MASK_SHIFT 3
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK 0x04
+#define PALMAS_PMU_SECONDARY_INT_CHARG_DET_N_MASK_SHIFT 2
+#define PALMAS_PMU_SECONDARY_INT_BB_MASK 0x02
+#define PALMAS_PMU_SECONDARY_INT_BB_MASK_SHIFT 1
+#define PALMAS_PMU_SECONDARY_INT_FBI_MASK 0x01
+#define PALMAS_PMU_SECONDARY_INT_FBI_MASK_SHIFT 0
+
+/* Bit definitions for SW_REVISION */
+#define PALMAS_SW_REVISION_SW_REVISION_MASK 0xff
+#define PALMAS_SW_REVISION_SW_REVISION_SHIFT 0
+
+/* Bit definitions for EXT_CHRG_CTRL */
+#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS 0x80
+#define PALMAS_EXT_CHRG_CTRL_VBUS_OVV_STATUS_SHIFT 7
+#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS 0x40
+#define PALMAS_EXT_CHRG_CTRL_CHARG_DET_N_STATUS_SHIFT 6
+#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY 0x08
+#define PALMAS_EXT_CHRG_CTRL_VSYS_DEBOUNCE_DELAY_SHIFT 3
+#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N 0x04
+#define PALMAS_EXT_CHRG_CTRL_CHRG_DET_N_SHIFT 2
+#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN 0x02
+#define PALMAS_EXT_CHRG_CTRL_AUTO_ACA_EN_SHIFT 1
+#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN 0x01
+#define PALMAS_EXT_CHRG_CTRL_AUTO_LDOUSB_EN_SHIFT 0
+
+/* Bit definitions for PMU_SECONDARY_INT2 */
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC 0x20
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_INT_SRC_SHIFT 5
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC 0x10
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_INT_SRC_SHIFT 4
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK 0x02
+#define PALMAS_PMU_SECONDARY_INT2_DVFS2_MASK_SHIFT 1
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK 0x01
+#define PALMAS_PMU_SECONDARY_INT2_DVFS1_MASK_SHIFT 0
+
+/* Registers for function RESOURCE */
+#define PALMAS_CLK32KG_CTRL 0x0
+#define PALMAS_CLK32KGAUDIO_CTRL 0x1
+#define PALMAS_REGEN1_CTRL 0x2
+#define PALMAS_REGEN2_CTRL 0x3
+#define PALMAS_SYSEN1_CTRL 0x4
+#define PALMAS_SYSEN2_CTRL 0x5
+#define PALMAS_NSLEEP_RES_ASSIGN 0x6
+#define PALMAS_NSLEEP_SMPS_ASSIGN 0x7
+#define PALMAS_NSLEEP_LDO_ASSIGN1 0x8
+#define PALMAS_NSLEEP_LDO_ASSIGN2 0x9
+#define PALMAS_ENABLE1_RES_ASSIGN 0xA
+#define PALMAS_ENABLE1_SMPS_ASSIGN 0xB
+#define PALMAS_ENABLE1_LDO_ASSIGN1 0xC
+#define PALMAS_ENABLE1_LDO_ASSIGN2 0xD
+#define PALMAS_ENABLE2_RES_ASSIGN 0xE
+#define PALMAS_ENABLE2_SMPS_ASSIGN 0xF
+#define PALMAS_ENABLE2_LDO_ASSIGN1 0x10
+#define PALMAS_ENABLE2_LDO_ASSIGN2 0x11
+#define PALMAS_REGEN3_CTRL 0x12
+
+/* Bit definitions for CLK32KG_CTRL */
+#define PALMAS_CLK32KG_CTRL_STATUS 0x10
+#define PALMAS_CLK32KG_CTRL_STATUS_SHIFT 4
+#define PALMAS_CLK32KG_CTRL_MODE_SLEEP 0x04
+#define PALMAS_CLK32KG_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_CLK32KG_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for CLK32KGAUDIO_CTRL */
+#define PALMAS_CLK32KGAUDIO_CTRL_STATUS 0x10
+#define PALMAS_CLK32KGAUDIO_CTRL_STATUS_SHIFT 4
+#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3 0x08
+#define PALMAS_CLK32KGAUDIO_CTRL_RESERVED3_SHIFT 3
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP 0x04
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_CLK32KGAUDIO_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for REGEN1_CTRL */
+#define PALMAS_REGEN1_CTRL_STATUS 0x10
+#define PALMAS_REGEN1_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN1_CTRL_MODE_SLEEP 0x04
+#define PALMAS_REGEN1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN1_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_REGEN1_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for REGEN2_CTRL */
+#define PALMAS_REGEN2_CTRL_STATUS 0x10
+#define PALMAS_REGEN2_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN2_CTRL_MODE_SLEEP 0x04
+#define PALMAS_REGEN2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN2_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_REGEN2_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SYSEN1_CTRL */
+#define PALMAS_SYSEN1_CTRL_STATUS 0x10
+#define PALMAS_SYSEN1_CTRL_STATUS_SHIFT 4
+#define PALMAS_SYSEN1_CTRL_MODE_SLEEP 0x04
+#define PALMAS_SYSEN1_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_SYSEN1_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for SYSEN2_CTRL */
+#define PALMAS_SYSEN2_CTRL_STATUS 0x10
+#define PALMAS_SYSEN2_CTRL_STATUS_SHIFT 4
+#define PALMAS_SYSEN2_CTRL_MODE_SLEEP 0x04
+#define PALMAS_SYSEN2_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_SYSEN2_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Bit definitions for NSLEEP_RES_ASSIGN */
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3 0x40
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO 0x20
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG 0x10
+#define PALMAS_NSLEEP_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2 0x08
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1 0x04
+#define PALMAS_NSLEEP_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2 0x02
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1 0x01
+#define PALMAS_NSLEEP_RES_ASSIGN_REGEN1_SHIFT 0
+
+/* Bit definitions for NSLEEP_SMPS_ASSIGN */
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10 0x80
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9 0x40
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8 0x20
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7 0x10
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6 0x08
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45 0x04
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3 0x02
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12 0x01
+#define PALMAS_NSLEEP_SMPS_ASSIGN_SMPS12_SHIFT 0
+
+/* Bit definitions for NSLEEP_LDO_ASSIGN1 */
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8 0x80
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7 0x40
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6 0x20
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5 0x10
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4 0x08
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3 0x04
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2 0x02
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1 0x01
+#define PALMAS_NSLEEP_LDO_ASSIGN1_LDO1_SHIFT 0
+
+/* Bit definitions for NSLEEP_LDO_ASSIGN2 */
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB 0x04
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN 0x02
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9 0x01
+#define PALMAS_NSLEEP_LDO_ASSIGN2_LDO9_SHIFT 0
+
+/* Bit definitions for ENABLE1_RES_ASSIGN */
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3 0x40
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO 0x20
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG 0x10
+#define PALMAS_ENABLE1_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2 0x08
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1 0x04
+#define PALMAS_ENABLE1_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2 0x02
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1 0x01
+#define PALMAS_ENABLE1_RES_ASSIGN_REGEN1_SHIFT 0
+
+/* Bit definitions for ENABLE1_SMPS_ASSIGN */
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10 0x80
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9 0x40
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8 0x20
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7 0x10
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6 0x08
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45 0x04
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3 0x02
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12 0x01
+#define PALMAS_ENABLE1_SMPS_ASSIGN_SMPS12_SHIFT 0
+
+/* Bit definitions for ENABLE1_LDO_ASSIGN1 */
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8 0x80
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7 0x40
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6 0x20
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5 0x10
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4 0x08
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3 0x04
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2 0x02
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1 0x01
+#define PALMAS_ENABLE1_LDO_ASSIGN1_LDO1_SHIFT 0
+
+/* Bit definitions for ENABLE1_LDO_ASSIGN2 */
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB 0x04
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN 0x02
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9 0x01
+#define PALMAS_ENABLE1_LDO_ASSIGN2_LDO9_SHIFT 0
+
+/* Bit definitions for ENABLE2_RES_ASSIGN */
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3 0x40
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN3_SHIFT 6
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO 0x20
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KGAUDIO_SHIFT 5
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG 0x10
+#define PALMAS_ENABLE2_RES_ASSIGN_CLK32KG_SHIFT 4
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2 0x08
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN2_SHIFT 3
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1 0x04
+#define PALMAS_ENABLE2_RES_ASSIGN_SYSEN1_SHIFT 2
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2 0x02
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN2_SHIFT 1
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1 0x01
+#define PALMAS_ENABLE2_RES_ASSIGN_REGEN1_SHIFT 0
+
+/* Bit definitions for ENABLE2_SMPS_ASSIGN */
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10 0x80
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS10_SHIFT 7
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9 0x40
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS9_SHIFT 6
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8 0x20
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS8_SHIFT 5
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7 0x10
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS7_SHIFT 4
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6 0x08
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS6_SHIFT 3
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45 0x04
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS45_SHIFT 2
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3 0x02
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS3_SHIFT 1
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12 0x01
+#define PALMAS_ENABLE2_SMPS_ASSIGN_SMPS12_SHIFT 0
+
+/* Bit definitions for ENABLE2_LDO_ASSIGN1 */
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8 0x80
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO8_SHIFT 7
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7 0x40
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO7_SHIFT 6
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6 0x20
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO6_SHIFT 5
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5 0x10
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO5_SHIFT 4
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4 0x08
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO4_SHIFT 3
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3 0x04
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO3_SHIFT 2
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2 0x02
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO2_SHIFT 1
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1 0x01
+#define PALMAS_ENABLE2_LDO_ASSIGN1_LDO1_SHIFT 0
+
+/* Bit definitions for ENABLE2_LDO_ASSIGN2 */
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB 0x04
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOUSB_SHIFT 2
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN 0x02
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDOLN_SHIFT 1
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9 0x01
+#define PALMAS_ENABLE2_LDO_ASSIGN2_LDO9_SHIFT 0
+
+/* Bit definitions for REGEN3_CTRL */
+#define PALMAS_REGEN3_CTRL_STATUS 0x10
+#define PALMAS_REGEN3_CTRL_STATUS_SHIFT 4
+#define PALMAS_REGEN3_CTRL_MODE_SLEEP 0x04
+#define PALMAS_REGEN3_CTRL_MODE_SLEEP_SHIFT 2
+#define PALMAS_REGEN3_CTRL_MODE_ACTIVE 0x01
+#define PALMAS_REGEN3_CTRL_MODE_ACTIVE_SHIFT 0
+
+/* Registers for function PAD_CONTROL */
+#define PALMAS_PU_PD_INPUT_CTRL1 0x0
+#define PALMAS_PU_PD_INPUT_CTRL2 0x1
+#define PALMAS_PU_PD_INPUT_CTRL3 0x2
+#define PALMAS_OD_OUTPUT_CTRL 0x4
+#define PALMAS_POLARITY_CTRL 0x5
+#define PALMAS_PRIMARY_SECONDARY_PAD1 0x6
+#define PALMAS_PRIMARY_SECONDARY_PAD2 0x7
+#define PALMAS_I2C_SPI 0x8
+#define PALMAS_PU_PD_INPUT_CTRL4 0x9
+#define PALMAS_PRIMARY_SECONDARY_PAD3 0xA
+
+/* Bit definitions for PU_PD_INPUT_CTRL1 */
+#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD 0x40
+#define PALMAS_PU_PD_INPUT_CTRL1_RESET_IN_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU 0x20
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PU_SHIFT 5
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD 0x10
+#define PALMAS_PU_PD_INPUT_CTRL1_GPADC_START_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD 0x04
+#define PALMAS_PU_PD_INPUT_CTRL1_PWRDOWN_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU 0x02
+#define PALMAS_PU_PD_INPUT_CTRL1_NRESWARM_PU_SHIFT 1
+
+/* Bit definitions for PU_PD_INPUT_CTRL2 */
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU 0x20
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PU_SHIFT 5
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD 0x10
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE2_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU 0x08
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PU_SHIFT 3
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD 0x04
+#define PALMAS_PU_PD_INPUT_CTRL2_ENABLE1_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU 0x02
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PU_SHIFT 1
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD 0x01
+#define PALMAS_PU_PD_INPUT_CTRL2_NSLEEP_PD_SHIFT 0
+
+/* Bit definitions for PU_PD_INPUT_CTRL3 */
+#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD 0x40
+#define PALMAS_PU_PD_INPUT_CTRL3_ACOK_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD 0x10
+#define PALMAS_PU_PD_INPUT_CTRL3_CHRG_DET_N_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD 0x04
+#define PALMAS_PU_PD_INPUT_CTRL3_POWERHOLD_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD 0x01
+#define PALMAS_PU_PD_INPUT_CTRL3_MSECURE_PD_SHIFT 0
+
+/* Bit definitions for OD_OUTPUT_CTRL */
+#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD 0x80
+#define PALMAS_OD_OUTPUT_CTRL_PWM_2_OD_SHIFT 7
+#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD 0x40
+#define PALMAS_OD_OUTPUT_CTRL_VBUSDET_OD_SHIFT 6
+#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD 0x20
+#define PALMAS_OD_OUTPUT_CTRL_PWM_1_OD_SHIFT 5
+#define PALMAS_OD_OUTPUT_CTRL_INT_OD 0x08
+#define PALMAS_OD_OUTPUT_CTRL_INT_OD_SHIFT 3
+
+/* Bit definitions for POLARITY_CTRL */
+#define PALMAS_POLARITY_CTRL_INT_POLARITY 0x80
+#define PALMAS_POLARITY_CTRL_INT_POLARITY_SHIFT 7
+#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY 0x40
+#define PALMAS_POLARITY_CTRL_ENABLE2_POLARITY_SHIFT 6
+#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY 0x20
+#define PALMAS_POLARITY_CTRL_ENABLE1_POLARITY_SHIFT 5
+#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY 0x10
+#define PALMAS_POLARITY_CTRL_NSLEEP_POLARITY_SHIFT 4
+#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY 0x08
+#define PALMAS_POLARITY_CTRL_RESET_IN_POLARITY_SHIFT 3
+#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY 0x04
+#define PALMAS_POLARITY_CTRL_GPIO_3_CHRG_DET_N_POLARITY_SHIFT 2
+#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY 0x02
+#define PALMAS_POLARITY_CTRL_POWERGOOD_USB_PSEL_POLARITY_SHIFT 1
+#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY 0x01
+#define PALMAS_POLARITY_CTRL_PWRDOWN_POLARITY_SHIFT 0
+
+/* Bit definitions for PRIMARY_SECONDARY_PAD1 */
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3 0x80
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_3_SHIFT 7
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_MASK 0x60
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_2_SHIFT 5
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK 0x18
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT 3
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0 0x04
+#define PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_0_SHIFT 2
+#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC 0x02
+#define PALMAS_PRIMARY_SECONDARY_PAD1_VAC_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD 0x01
+#define PALMAS_PRIMARY_SECONDARY_PAD1_POWERGOOD_SHIFT 0
+
+/* Bit definitions for PRIMARY_SECONDARY_PAD2 */
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK 0x30
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_SHIFT 4
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6 0x08
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_6_SHIFT 3
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_MASK 0x06
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_5_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4 0x01
+#define PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_4_SHIFT 0
+
+/* Bit definitions for I2C_SPI */
+#define PALMAS_I2C_SPI_I2C2OTP_EN 0x80
+#define PALMAS_I2C_SPI_I2C2OTP_EN_SHIFT 7
+#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL 0x40
+#define PALMAS_I2C_SPI_I2C2OTP_PAGESEL_SHIFT 6
+#define PALMAS_I2C_SPI_ID_I2C2 0x20
+#define PALMAS_I2C_SPI_ID_I2C2_SHIFT 5
+#define PALMAS_I2C_SPI_I2C_SPI 0x10
+#define PALMAS_I2C_SPI_I2C_SPI_SHIFT 4
+#define PALMAS_I2C_SPI_ID_I2C1_MASK 0x0f
+#define PALMAS_I2C_SPI_ID_I2C1_SHIFT 0
+
+/* Bit definitions for PU_PD_INPUT_CTRL4 */
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD 0x40
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_DAT_PD_SHIFT 6
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD 0x10
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS2_CLK_PD_SHIFT 4
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD 0x04
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_DAT_PD_SHIFT 2
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD 0x01
+#define PALMAS_PU_PD_INPUT_CTRL4_DVFS1_CLK_PD_SHIFT 0
+
+/* Bit definitions for PRIMARY_SECONDARY_PAD3 */
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2 0x02
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS2_SHIFT 1
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1 0x01
+#define PALMAS_PRIMARY_SECONDARY_PAD3_DVFS1_SHIFT 0
+
+/* Registers for function LED_PWM */
+#define PALMAS_LED_PERIOD_CTRL 0x0
+#define PALMAS_LED_CTRL 0x1
+#define PALMAS_PWM_CTRL1 0x2
+#define PALMAS_PWM_CTRL2 0x3
+
+/* Bit definitions for LED_PERIOD_CTRL */
+#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_MASK 0x38
+#define PALMAS_LED_PERIOD_CTRL_LED_2_PERIOD_SHIFT 3
+#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_MASK 0x07
+#define PALMAS_LED_PERIOD_CTRL_LED_1_PERIOD_SHIFT 0
+
+/* Bit definitions for LED_CTRL */
+#define PALMAS_LED_CTRL_LED_2_SEQ 0x20
+#define PALMAS_LED_CTRL_LED_2_SEQ_SHIFT 5
+#define PALMAS_LED_CTRL_LED_1_SEQ 0x10
+#define PALMAS_LED_CTRL_LED_1_SEQ_SHIFT 4
+#define PALMAS_LED_CTRL_LED_2_ON_TIME_MASK 0x0c
+#define PALMAS_LED_CTRL_LED_2_ON_TIME_SHIFT 2
+#define PALMAS_LED_CTRL_LED_1_ON_TIME_MASK 0x03
+#define PALMAS_LED_CTRL_LED_1_ON_TIME_SHIFT 0
+
+/* Bit definitions for PWM_CTRL1 */
+#define PALMAS_PWM_CTRL1_PWM_FREQ_EN 0x02
+#define PALMAS_PWM_CTRL1_PWM_FREQ_EN_SHIFT 1
+#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL 0x01
+#define PALMAS_PWM_CTRL1_PWM_FREQ_SEL_SHIFT 0
+
+/* Bit definitions for PWM_CTRL2 */
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_MASK 0xff
+#define PALMAS_PWM_CTRL2_PWM_DUTY_SEL_SHIFT 0
+
+/* Registers for function INTERRUPT */
+#define PALMAS_INT1_STATUS 0x0
+#define PALMAS_INT1_MASK 0x1
+#define PALMAS_INT1_LINE_STATE 0x2
+#define PALMAS_INT1_EDGE_DETECT1_RESERVED 0x3
+#define PALMAS_INT1_EDGE_DETECT2_RESERVED 0x4
+#define PALMAS_INT2_STATUS 0x5
+#define PALMAS_INT2_MASK 0x6
+#define PALMAS_INT2_LINE_STATE 0x7
+#define PALMAS_INT2_EDGE_DETECT1_RESERVED 0x8
+#define PALMAS_INT2_EDGE_DETECT2_RESERVED 0x9
+#define PALMAS_INT3_STATUS 0xA
+#define PALMAS_INT3_MASK 0xB
+#define PALMAS_INT3_LINE_STATE 0xC
+#define PALMAS_INT3_EDGE_DETECT1_RESERVED 0xD
+#define PALMAS_INT3_EDGE_DETECT2_RESERVED 0xE
+#define PALMAS_INT4_STATUS 0xF
+#define PALMAS_INT4_MASK 0x10
+#define PALMAS_INT4_LINE_STATE 0x11
+#define PALMAS_INT4_EDGE_DETECT1 0x12
+#define PALMAS_INT4_EDGE_DETECT2 0x13
+#define PALMAS_INT_CTRL 0x14
+
+/* Bit definitions for INT1_STATUS */
+#define PALMAS_INT1_STATUS_VBAT_MON 0x80
+#define PALMAS_INT1_STATUS_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_STATUS_VSYS_MON 0x40
+#define PALMAS_INT1_STATUS_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_STATUS_HOTDIE 0x20
+#define PALMAS_INT1_STATUS_HOTDIE_SHIFT 5
+#define PALMAS_INT1_STATUS_PWRDOWN 0x10
+#define PALMAS_INT1_STATUS_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_STATUS_RPWRON 0x08
+#define PALMAS_INT1_STATUS_RPWRON_SHIFT 3
+#define PALMAS_INT1_STATUS_LONG_PRESS_KEY 0x04
+#define PALMAS_INT1_STATUS_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_STATUS_PWRON 0x02
+#define PALMAS_INT1_STATUS_PWRON_SHIFT 1
+#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV 0x01
+#define PALMAS_INT1_STATUS_CHARG_DET_N_VBUS_OVV_SHIFT 0
+
+/* Bit definitions for INT1_MASK */
+#define PALMAS_INT1_MASK_VBAT_MON 0x80
+#define PALMAS_INT1_MASK_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_MASK_VSYS_MON 0x40
+#define PALMAS_INT1_MASK_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_MASK_HOTDIE 0x20
+#define PALMAS_INT1_MASK_HOTDIE_SHIFT 5
+#define PALMAS_INT1_MASK_PWRDOWN 0x10
+#define PALMAS_INT1_MASK_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_MASK_RPWRON 0x08
+#define PALMAS_INT1_MASK_RPWRON_SHIFT 3
+#define PALMAS_INT1_MASK_LONG_PRESS_KEY 0x04
+#define PALMAS_INT1_MASK_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_MASK_PWRON 0x02
+#define PALMAS_INT1_MASK_PWRON_SHIFT 1
+#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV 0x01
+#define PALMAS_INT1_MASK_CHARG_DET_N_VBUS_OVV_SHIFT 0
+
+/* Bit definitions for INT1_LINE_STATE */
+#define PALMAS_INT1_LINE_STATE_VBAT_MON 0x80
+#define PALMAS_INT1_LINE_STATE_VBAT_MON_SHIFT 7
+#define PALMAS_INT1_LINE_STATE_VSYS_MON 0x40
+#define PALMAS_INT1_LINE_STATE_VSYS_MON_SHIFT 6
+#define PALMAS_INT1_LINE_STATE_HOTDIE 0x20
+#define PALMAS_INT1_LINE_STATE_HOTDIE_SHIFT 5
+#define PALMAS_INT1_LINE_STATE_PWRDOWN 0x10
+#define PALMAS_INT1_LINE_STATE_PWRDOWN_SHIFT 4
+#define PALMAS_INT1_LINE_STATE_RPWRON 0x08
+#define PALMAS_INT1_LINE_STATE_RPWRON_SHIFT 3
+#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY 0x04
+#define PALMAS_INT1_LINE_STATE_LONG_PRESS_KEY_SHIFT 2
+#define PALMAS_INT1_LINE_STATE_PWRON 0x02
+#define PALMAS_INT1_LINE_STATE_PWRON_SHIFT 1
+#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV 0x01
+#define PALMAS_INT1_LINE_STATE_CHARG_DET_N_VBUS_OVV_SHIFT 0
+
+/* Bit definitions for INT2_STATUS */
+#define PALMAS_INT2_STATUS_VAC_ACOK 0x80
+#define PALMAS_INT2_STATUS_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_STATUS_SHORT 0x40
+#define PALMAS_INT2_STATUS_SHORT_SHIFT 6
+#define PALMAS_INT2_STATUS_FBI_BB 0x20
+#define PALMAS_INT2_STATUS_FBI_BB_SHIFT 5
+#define PALMAS_INT2_STATUS_RESET_IN 0x10
+#define PALMAS_INT2_STATUS_RESET_IN_SHIFT 4
+#define PALMAS_INT2_STATUS_BATREMOVAL 0x08
+#define PALMAS_INT2_STATUS_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_STATUS_WDT 0x04
+#define PALMAS_INT2_STATUS_WDT_SHIFT 2
+#define PALMAS_INT2_STATUS_RTC_TIMER 0x02
+#define PALMAS_INT2_STATUS_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_STATUS_RTC_ALARM 0x01
+#define PALMAS_INT2_STATUS_RTC_ALARM_SHIFT 0
+
+/* Bit definitions for INT2_MASK */
+#define PALMAS_INT2_MASK_VAC_ACOK 0x80
+#define PALMAS_INT2_MASK_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_MASK_SHORT 0x40
+#define PALMAS_INT2_MASK_SHORT_SHIFT 6
+#define PALMAS_INT2_MASK_FBI_BB 0x20
+#define PALMAS_INT2_MASK_FBI_BB_SHIFT 5
+#define PALMAS_INT2_MASK_RESET_IN 0x10
+#define PALMAS_INT2_MASK_RESET_IN_SHIFT 4
+#define PALMAS_INT2_MASK_BATREMOVAL 0x08
+#define PALMAS_INT2_MASK_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_MASK_WDT 0x04
+#define PALMAS_INT2_MASK_WDT_SHIFT 2
+#define PALMAS_INT2_MASK_RTC_TIMER 0x02
+#define PALMAS_INT2_MASK_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_MASK_RTC_ALARM 0x01
+#define PALMAS_INT2_MASK_RTC_ALARM_SHIFT 0
+
+/* Bit definitions for INT2_LINE_STATE */
+#define PALMAS_INT2_LINE_STATE_VAC_ACOK 0x80
+#define PALMAS_INT2_LINE_STATE_VAC_ACOK_SHIFT 7
+#define PALMAS_INT2_LINE_STATE_SHORT 0x40
+#define PALMAS_INT2_LINE_STATE_SHORT_SHIFT 6
+#define PALMAS_INT2_LINE_STATE_FBI_BB 0x20
+#define PALMAS_INT2_LINE_STATE_FBI_BB_SHIFT 5
+#define PALMAS_INT2_LINE_STATE_RESET_IN 0x10
+#define PALMAS_INT2_LINE_STATE_RESET_IN_SHIFT 4
+#define PALMAS_INT2_LINE_STATE_BATREMOVAL 0x08
+#define PALMAS_INT2_LINE_STATE_BATREMOVAL_SHIFT 3
+#define PALMAS_INT2_LINE_STATE_WDT 0x04
+#define PALMAS_INT2_LINE_STATE_WDT_SHIFT 2
+#define PALMAS_INT2_LINE_STATE_RTC_TIMER 0x02
+#define PALMAS_INT2_LINE_STATE_RTC_TIMER_SHIFT 1
+#define PALMAS_INT2_LINE_STATE_RTC_ALARM 0x01
+#define PALMAS_INT2_LINE_STATE_RTC_ALARM_SHIFT 0
+
+/* Bit definitions for INT3_STATUS */
+#define PALMAS_INT3_STATUS_VBUS 0x80
+#define PALMAS_INT3_STATUS_VBUS_SHIFT 7
+#define PALMAS_INT3_STATUS_VBUS_OTG 0x40
+#define PALMAS_INT3_STATUS_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_STATUS_ID 0x20
+#define PALMAS_INT3_STATUS_ID_SHIFT 5
+#define PALMAS_INT3_STATUS_ID_OTG 0x10
+#define PALMAS_INT3_STATUS_ID_OTG_SHIFT 4
+#define PALMAS_INT3_STATUS_GPADC_EOC_RT 0x08
+#define PALMAS_INT3_STATUS_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_STATUS_GPADC_EOC_SW 0x04
+#define PALMAS_INT3_STATUS_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_STATUS_GPADC_AUTO_1 0x02
+#define PALMAS_INT3_STATUS_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_STATUS_GPADC_AUTO_0 0x01
+#define PALMAS_INT3_STATUS_GPADC_AUTO_0_SHIFT 0
+
+/* Bit definitions for INT3_MASK */
+#define PALMAS_INT3_MASK_VBUS 0x80
+#define PALMAS_INT3_MASK_VBUS_SHIFT 7
+#define PALMAS_INT3_MASK_VBUS_OTG 0x40
+#define PALMAS_INT3_MASK_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_MASK_ID 0x20
+#define PALMAS_INT3_MASK_ID_SHIFT 5
+#define PALMAS_INT3_MASK_ID_OTG 0x10
+#define PALMAS_INT3_MASK_ID_OTG_SHIFT 4
+#define PALMAS_INT3_MASK_GPADC_EOC_RT 0x08
+#define PALMAS_INT3_MASK_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_MASK_GPADC_EOC_SW 0x04
+#define PALMAS_INT3_MASK_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_MASK_GPADC_AUTO_1 0x02
+#define PALMAS_INT3_MASK_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_MASK_GPADC_AUTO_0 0x01
+#define PALMAS_INT3_MASK_GPADC_AUTO_0_SHIFT 0
+
+/* Bit definitions for INT3_LINE_STATE */
+#define PALMAS_INT3_LINE_STATE_VBUS 0x80
+#define PALMAS_INT3_LINE_STATE_VBUS_SHIFT 7
+#define PALMAS_INT3_LINE_STATE_VBUS_OTG 0x40
+#define PALMAS_INT3_LINE_STATE_VBUS_OTG_SHIFT 6
+#define PALMAS_INT3_LINE_STATE_ID 0x20
+#define PALMAS_INT3_LINE_STATE_ID_SHIFT 5
+#define PALMAS_INT3_LINE_STATE_ID_OTG 0x10
+#define PALMAS_INT3_LINE_STATE_ID_OTG_SHIFT 4
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT 0x08
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_RT_SHIFT 3
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW 0x04
+#define PALMAS_INT3_LINE_STATE_GPADC_EOC_SW_SHIFT 2
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1 0x02
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_1_SHIFT 1
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0 0x01
+#define PALMAS_INT3_LINE_STATE_GPADC_AUTO_0_SHIFT 0
+
+/* Bit definitions for INT4_STATUS */
+#define PALMAS_INT4_STATUS_GPIO_7 0x80
+#define PALMAS_INT4_STATUS_GPIO_7_SHIFT 7
+#define PALMAS_INT4_STATUS_GPIO_6 0x40
+#define PALMAS_INT4_STATUS_GPIO_6_SHIFT 6
+#define PALMAS_INT4_STATUS_GPIO_5 0x20
+#define PALMAS_INT4_STATUS_GPIO_5_SHIFT 5
+#define PALMAS_INT4_STATUS_GPIO_4 0x10
+#define PALMAS_INT4_STATUS_GPIO_4_SHIFT 4
+#define PALMAS_INT4_STATUS_GPIO_3 0x08
+#define PALMAS_INT4_STATUS_GPIO_3_SHIFT 3
+#define PALMAS_INT4_STATUS_GPIO_2 0x04
+#define PALMAS_INT4_STATUS_GPIO_2_SHIFT 2
+#define PALMAS_INT4_STATUS_GPIO_1 0x02
+#define PALMAS_INT4_STATUS_GPIO_1_SHIFT 1
+#define PALMAS_INT4_STATUS_GPIO_0 0x01
+#define PALMAS_INT4_STATUS_GPIO_0_SHIFT 0
+
+/* Bit definitions for INT4_MASK */
+#define PALMAS_INT4_MASK_GPIO_7 0x80
+#define PALMAS_INT4_MASK_GPIO_7_SHIFT 7
+#define PALMAS_INT4_MASK_GPIO_6 0x40
+#define PALMAS_INT4_MASK_GPIO_6_SHIFT 6
+#define PALMAS_INT4_MASK_GPIO_5 0x20
+#define PALMAS_INT4_MASK_GPIO_5_SHIFT 5
+#define PALMAS_INT4_MASK_GPIO_4 0x10
+#define PALMAS_INT4_MASK_GPIO_4_SHIFT 4
+#define PALMAS_INT4_MASK_GPIO_3 0x08
+#define PALMAS_INT4_MASK_GPIO_3_SHIFT 3
+#define PALMAS_INT4_MASK_GPIO_2 0x04
+#define PALMAS_INT4_MASK_GPIO_2_SHIFT 2
+#define PALMAS_INT4_MASK_GPIO_1 0x02
+#define PALMAS_INT4_MASK_GPIO_1_SHIFT 1
+#define PALMAS_INT4_MASK_GPIO_0 0x01
+#define PALMAS_INT4_MASK_GPIO_0_SHIFT 0
+
+/* Bit definitions for INT4_LINE_STATE */
+#define PALMAS_INT4_LINE_STATE_GPIO_7 0x80
+#define PALMAS_INT4_LINE_STATE_GPIO_7_SHIFT 7
+#define PALMAS_INT4_LINE_STATE_GPIO_6 0x40
+#define PALMAS_INT4_LINE_STATE_GPIO_6_SHIFT 6
+#define PALMAS_INT4_LINE_STATE_GPIO_5 0x20
+#define PALMAS_INT4_LINE_STATE_GPIO_5_SHIFT 5
+#define PALMAS_INT4_LINE_STATE_GPIO_4 0x10
+#define PALMAS_INT4_LINE_STATE_GPIO_4_SHIFT 4
+#define PALMAS_INT4_LINE_STATE_GPIO_3 0x08
+#define PALMAS_INT4_LINE_STATE_GPIO_3_SHIFT 3
+#define PALMAS_INT4_LINE_STATE_GPIO_2 0x04
+#define PALMAS_INT4_LINE_STATE_GPIO_2_SHIFT 2
+#define PALMAS_INT4_LINE_STATE_GPIO_1 0x02
+#define PALMAS_INT4_LINE_STATE_GPIO_1_SHIFT 1
+#define PALMAS_INT4_LINE_STATE_GPIO_0 0x01
+#define PALMAS_INT4_LINE_STATE_GPIO_0_SHIFT 0
+
+/* Bit definitions for INT4_EDGE_DETECT1 */
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING 0x80
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_RISING_SHIFT 7
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING 0x40
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_3_FALLING_SHIFT 6
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING 0x20
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_RISING_SHIFT 5
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING 0x10
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_2_FALLING_SHIFT 4
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING 0x08
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_RISING_SHIFT 3
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING 0x04
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_1_FALLING_SHIFT 2
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING 0x02
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_RISING_SHIFT 1
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING 0x01
+#define PALMAS_INT4_EDGE_DETECT1_GPIO_0_FALLING_SHIFT 0
+
+/* Bit definitions for INT4_EDGE_DETECT2 */
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING 0x80
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_RISING_SHIFT 7
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING 0x40
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_7_FALLING_SHIFT 6
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING 0x20
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_RISING_SHIFT 5
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING 0x10
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_6_FALLING_SHIFT 4
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING 0x08
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_RISING_SHIFT 3
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING 0x04
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_5_FALLING_SHIFT 2
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING 0x02
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_RISING_SHIFT 1
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING 0x01
+#define PALMAS_INT4_EDGE_DETECT2_GPIO_4_FALLING_SHIFT 0
+
+/* Bit definitions for INT_CTRL */
+#define PALMAS_INT_CTRL_INT_PENDING 0x04
+#define PALMAS_INT_CTRL_INT_PENDING_SHIFT 2
+#define PALMAS_INT_CTRL_INT_CLEAR 0x01
+#define PALMAS_INT_CTRL_INT_CLEAR_SHIFT 0
+
+/* Registers for function USB_OTG */
+#define PALMAS_USB_WAKEUP 0x3
+#define PALMAS_USB_VBUS_CTRL_SET 0x4
+#define PALMAS_USB_VBUS_CTRL_CLR 0x5
+#define PALMAS_USB_ID_CTRL_SET 0x6
+#define PALMAS_USB_ID_CTRL_CLEAR 0x7
+#define PALMAS_USB_VBUS_INT_SRC 0x8
+#define PALMAS_USB_VBUS_INT_LATCH_SET 0x9
+#define PALMAS_USB_VBUS_INT_LATCH_CLR 0xA
+#define PALMAS_USB_VBUS_INT_EN_LO_SET 0xB
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR 0xC
+#define PALMAS_USB_VBUS_INT_EN_HI_SET 0xD
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR 0xE
+#define PALMAS_USB_ID_INT_SRC 0xF
+#define PALMAS_USB_ID_INT_LATCH_SET 0x10
+#define PALMAS_USB_ID_INT_LATCH_CLR 0x11
+#define PALMAS_USB_ID_INT_EN_LO_SET 0x12
+#define PALMAS_USB_ID_INT_EN_LO_CLR 0x13
+#define PALMAS_USB_ID_INT_EN_HI_SET 0x14
+#define PALMAS_USB_ID_INT_EN_HI_CLR 0x15
+#define PALMAS_USB_OTG_ADP_CTRL 0x16
+#define PALMAS_USB_OTG_ADP_HIGH 0x17
+#define PALMAS_USB_OTG_ADP_LOW 0x18
+#define PALMAS_USB_OTG_ADP_RISE 0x19
+#define PALMAS_USB_OTG_REVISION 0x1A
+
+/* Bit definitions for USB_WAKEUP */
+#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP 0x01
+#define PALMAS_USB_WAKEUP_ID_WK_UP_COMP_SHIFT 0
+
+/* Bit definitions for USB_VBUS_CTRL_SET */
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS 0x80
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_CHRG_VSYS_SHIFT 7
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG 0x20
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_DISCHRG_SHIFT 5
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC 0x10
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SRC_SHIFT 4
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK 0x08
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_IADP_SINK_SHIFT 3
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP 0x04
+#define PALMAS_USB_VBUS_CTRL_SET_VBUS_ACT_COMP_SHIFT 2
+
+/* Bit definitions for USB_VBUS_CTRL_CLR */
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS 0x80
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_CHRG_VSYS_SHIFT 7
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG 0x20
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_DISCHRG_SHIFT 5
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC 0x10
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SRC_SHIFT 4
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK 0x08
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_IADP_SINK_SHIFT 3
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP 0x04
+#define PALMAS_USB_VBUS_CTRL_CLR_VBUS_ACT_COMP_SHIFT 2
+
+/* Bit definitions for USB_ID_CTRL_SET */
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K 0x80
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_220K_SHIFT 7
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K 0x40
+#define PALMAS_USB_ID_CTRL_SET_ID_PU_100K_SHIFT 6
+#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV 0x20
+#define PALMAS_USB_ID_CTRL_SET_ID_GND_DRV_SHIFT 5
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U 0x10
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_16U_SHIFT 4
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U 0x08
+#define PALMAS_USB_ID_CTRL_SET_ID_SRC_5U_SHIFT 3
+#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP 0x04
+#define PALMAS_USB_ID_CTRL_SET_ID_ACT_COMP_SHIFT 2
+
+/* Bit definitions for USB_ID_CTRL_CLEAR */
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K 0x80
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_220K_SHIFT 7
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K 0x40
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_PU_100K_SHIFT 6
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV 0x20
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_GND_DRV_SHIFT 5
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U 0x10
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_16U_SHIFT 4
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U 0x08
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_SRC_5U_SHIFT 3
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP 0x04
+#define PALMAS_USB_ID_CTRL_CLEAR_ID_ACT_COMP_SHIFT 2
+
+/* Bit definitions for USB_VBUS_INT_SRC */
+#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_SRC_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_SRC_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_SRC_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_SRC_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_SRC_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_SRC_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_LATCH_SET */
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP 0x10
+#define PALMAS_USB_VBUS_INT_LATCH_SET_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_LATCH_SET_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_LATCH_CLR */
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP 0x10
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_LATCH_CLR_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_EN_LO_SET */
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_EN_LO_SET_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_EN_LO_CLR */
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_EN_LO_CLR_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_EN_HI_SET */
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP 0x10
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_EN_HI_SET_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_VBUS_INT_EN_HI_CLR */
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD 0x80
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VOTG_SESS_VLD_SHIFT 7
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB 0x40
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_PRB_SHIFT 6
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS 0x20
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VADP_SNS_SHIFT 5
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP 0x10
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_ADP_SHIFT 4
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD 0x08
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_VBUS_VLD_SHIFT 3
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD 0x04
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VA_SESS_VLD_SHIFT 2
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD 0x02
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_VLD_SHIFT 1
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END 0x01
+#define PALMAS_USB_VBUS_INT_EN_HI_CLR_VB_SESS_END_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_SRC */
+#define PALMAS_USB_ID_INT_SRC_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_SRC_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_SRC_ID_A 0x08
+#define PALMAS_USB_ID_INT_SRC_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_SRC_ID_B 0x04
+#define PALMAS_USB_ID_INT_SRC_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_SRC_ID_C 0x02
+#define PALMAS_USB_ID_INT_SRC_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_SRC_ID_GND 0x01
+#define PALMAS_USB_ID_INT_SRC_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_LATCH_SET */
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_A 0x08
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_B 0x04
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_C 0x02
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND 0x01
+#define PALMAS_USB_ID_INT_LATCH_SET_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_LATCH_CLR */
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A 0x08
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B 0x04
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C 0x02
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND 0x01
+#define PALMAS_USB_ID_INT_LATCH_CLR_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_EN_LO_SET */
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A 0x08
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B 0x04
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C 0x02
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND 0x01
+#define PALMAS_USB_ID_INT_EN_LO_SET_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_EN_LO_CLR */
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A 0x08
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B 0x04
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C 0x02
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND 0x01
+#define PALMAS_USB_ID_INT_EN_LO_CLR_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_EN_HI_SET */
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A 0x08
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B 0x04
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C 0x02
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND 0x01
+#define PALMAS_USB_ID_INT_EN_HI_SET_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_ID_INT_EN_HI_CLR */
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT 0x10
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT_SHIFT 4
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A 0x08
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_A_SHIFT 3
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B 0x04
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_B_SHIFT 2
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C 0x02
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_C_SHIFT 1
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND 0x01
+#define PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND_SHIFT 0
+
+/* Bit definitions for USB_OTG_ADP_CTRL */
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN 0x04
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_EN_SHIFT 2
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_MASK 0x03
+#define PALMAS_USB_OTG_ADP_CTRL_ADP_MODE_SHIFT 0
+
+/* Bit definitions for USB_OTG_ADP_HIGH */
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_MASK 0xff
+#define PALMAS_USB_OTG_ADP_HIGH_T_ADP_HIGH_SHIFT 0
+
+/* Bit definitions for USB_OTG_ADP_LOW */
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_MASK 0xff
+#define PALMAS_USB_OTG_ADP_LOW_T_ADP_LOW_SHIFT 0
+
+/* Bit definitions for USB_OTG_ADP_RISE */
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_MASK 0xff
+#define PALMAS_USB_OTG_ADP_RISE_T_ADP_RISE_SHIFT 0
+
+/* Bit definitions for USB_OTG_REVISION */
+#define PALMAS_USB_OTG_REVISION_OTG_REV 0x01
+#define PALMAS_USB_OTG_REVISION_OTG_REV_SHIFT 0
+
+/* Registers for function VIBRATOR */
+#define PALMAS_VIBRA_CTRL 0x0
+
+/* Bit definitions for VIBRA_CTRL */
+#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_MASK 0x06
+#define PALMAS_VIBRA_CTRL_PWM_DUTY_SEL_SHIFT 1
+#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL 0x01
+#define PALMAS_VIBRA_CTRL_PWM_FREQ_SEL_SHIFT 0
+
+/* Registers for function GPIO */
+#define PALMAS_GPIO_DATA_IN 0x0
+#define PALMAS_GPIO_DATA_DIR 0x1
+#define PALMAS_GPIO_DATA_OUT 0x2
+#define PALMAS_GPIO_DEBOUNCE_EN 0x3
+#define PALMAS_GPIO_CLEAR_DATA_OUT 0x4
+#define PALMAS_GPIO_SET_DATA_OUT 0x5
+#define PALMAS_PU_PD_GPIO_CTRL1 0x6
+#define PALMAS_PU_PD_GPIO_CTRL2 0x7
+#define PALMAS_OD_OUTPUT_GPIO_CTRL 0x8
+
+/* Bit definitions for GPIO_DATA_IN */
+#define PALMAS_GPIO_DATA_IN_GPIO_7_IN 0x80
+#define PALMAS_GPIO_DATA_IN_GPIO_7_IN_SHIFT 7
+#define PALMAS_GPIO_DATA_IN_GPIO_6_IN 0x40
+#define PALMAS_GPIO_DATA_IN_GPIO_6_IN_SHIFT 6
+#define PALMAS_GPIO_DATA_IN_GPIO_5_IN 0x20
+#define PALMAS_GPIO_DATA_IN_GPIO_5_IN_SHIFT 5
+#define PALMAS_GPIO_DATA_IN_GPIO_4_IN 0x10
+#define PALMAS_GPIO_DATA_IN_GPIO_4_IN_SHIFT 4
+#define PALMAS_GPIO_DATA_IN_GPIO_3_IN 0x08
+#define PALMAS_GPIO_DATA_IN_GPIO_3_IN_SHIFT 3
+#define PALMAS_GPIO_DATA_IN_GPIO_2_IN 0x04
+#define PALMAS_GPIO_DATA_IN_GPIO_2_IN_SHIFT 2
+#define PALMAS_GPIO_DATA_IN_GPIO_1_IN 0x02
+#define PALMAS_GPIO_DATA_IN_GPIO_1_IN_SHIFT 1
+#define PALMAS_GPIO_DATA_IN_GPIO_0_IN 0x01
+#define PALMAS_GPIO_DATA_IN_GPIO_0_IN_SHIFT 0
+
+/* Bit definitions for GPIO_DATA_DIR */
+#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR 0x80
+#define PALMAS_GPIO_DATA_DIR_GPIO_7_DIR_SHIFT 7
+#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR 0x40
+#define PALMAS_GPIO_DATA_DIR_GPIO_6_DIR_SHIFT 6
+#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR 0x20
+#define PALMAS_GPIO_DATA_DIR_GPIO_5_DIR_SHIFT 5
+#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR 0x10
+#define PALMAS_GPIO_DATA_DIR_GPIO_4_DIR_SHIFT 4
+#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR 0x08
+#define PALMAS_GPIO_DATA_DIR_GPIO_3_DIR_SHIFT 3
+#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR 0x04
+#define PALMAS_GPIO_DATA_DIR_GPIO_2_DIR_SHIFT 2
+#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR 0x02
+#define PALMAS_GPIO_DATA_DIR_GPIO_1_DIR_SHIFT 1
+#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR 0x01
+#define PALMAS_GPIO_DATA_DIR_GPIO_0_DIR_SHIFT 0
+
+/* Bit definitions for GPIO_DATA_OUT */
+#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT 0x80
+#define PALMAS_GPIO_DATA_OUT_GPIO_7_OUT_SHIFT 7
+#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT 0x40
+#define PALMAS_GPIO_DATA_OUT_GPIO_6_OUT_SHIFT 6
+#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT 0x20
+#define PALMAS_GPIO_DATA_OUT_GPIO_5_OUT_SHIFT 5
+#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT 0x10
+#define PALMAS_GPIO_DATA_OUT_GPIO_4_OUT_SHIFT 4
+#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT 0x08
+#define PALMAS_GPIO_DATA_OUT_GPIO_3_OUT_SHIFT 3
+#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT 0x04
+#define PALMAS_GPIO_DATA_OUT_GPIO_2_OUT_SHIFT 2
+#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT 0x02
+#define PALMAS_GPIO_DATA_OUT_GPIO_1_OUT_SHIFT 1
+#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT 0x01
+#define PALMAS_GPIO_DATA_OUT_GPIO_0_OUT_SHIFT 0
+
+/* Bit definitions for GPIO_DEBOUNCE_EN */
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN 0x80
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_7_DEBOUNCE_EN_SHIFT 7
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN 0x40
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_6_DEBOUNCE_EN_SHIFT 6
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN 0x20
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_5_DEBOUNCE_EN_SHIFT 5
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN 0x10
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_4_DEBOUNCE_EN_SHIFT 4
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN 0x08
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_3_DEBOUNCE_EN_SHIFT 3
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN 0x04
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_2_DEBOUNCE_EN_SHIFT 2
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN 0x02
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_1_DEBOUNCE_EN_SHIFT 1
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN 0x01
+#define PALMAS_GPIO_DEBOUNCE_EN_GPIO_0_DEBOUNCE_EN_SHIFT 0
+
+/* Bit definitions for GPIO_CLEAR_DATA_OUT */
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT 0x80
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_7_CLEAR_DATA_OUT_SHIFT 7
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT 0x40
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_6_CLEAR_DATA_OUT_SHIFT 6
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT 0x20
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_5_CLEAR_DATA_OUT_SHIFT 5
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT 0x10
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_4_CLEAR_DATA_OUT_SHIFT 4
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT 0x08
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_3_CLEAR_DATA_OUT_SHIFT 3
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT 0x04
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_2_CLEAR_DATA_OUT_SHIFT 2
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT 0x02
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_1_CLEAR_DATA_OUT_SHIFT 1
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT 0x01
+#define PALMAS_GPIO_CLEAR_DATA_OUT_GPIO_0_CLEAR_DATA_OUT_SHIFT 0
+
+/* Bit definitions for GPIO_SET_DATA_OUT */
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT 0x80
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_7_SET_DATA_OUT_SHIFT 7
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT 0x40
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_6_SET_DATA_OUT_SHIFT 6
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT 0x20
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_5_SET_DATA_OUT_SHIFT 5
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT 0x10
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_4_SET_DATA_OUT_SHIFT 4
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT 0x08
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_3_SET_DATA_OUT_SHIFT 3
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT 0x04
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_2_SET_DATA_OUT_SHIFT 2
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT 0x02
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_1_SET_DATA_OUT_SHIFT 1
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT 0x01
+#define PALMAS_GPIO_SET_DATA_OUT_GPIO_0_SET_DATA_OUT_SHIFT 0
+
+/* Bit definitions for PU_PD_GPIO_CTRL1 */
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD 0x40
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_3_PD_SHIFT 6
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU 0x20
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PU_SHIFT 5
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD 0x10
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_2_PD_SHIFT 4
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU 0x08
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PU_SHIFT 3
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD 0x04
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_1_PD_SHIFT 2
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD 0x01
+#define PALMAS_PU_PD_GPIO_CTRL1_GPIO_0_PD_SHIFT 0
+
+/* Bit definitions for PU_PD_GPIO_CTRL2 */
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD 0x40
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_7_PD_SHIFT 6
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU 0x20
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PU_SHIFT 5
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD 0x10
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_6_PD_SHIFT 4
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU 0x08
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PU_SHIFT 3
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD 0x04
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_5_PD_SHIFT 2
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU 0x02
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PU_SHIFT 1
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD 0x01
+#define PALMAS_PU_PD_GPIO_CTRL2_GPIO_4_PD_SHIFT 0
+
+/* Bit definitions for OD_OUTPUT_GPIO_CTRL */
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD 0x20
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_5_OD_SHIFT 5
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD 0x04
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_2_OD_SHIFT 2
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD 0x02
+#define PALMAS_OD_OUTPUT_GPIO_CTRL_GPIO_1_OD_SHIFT 1
+
+/* Registers for function GPADC */
+#define PALMAS_GPADC_CTRL1 0x0
+#define PALMAS_GPADC_CTRL2 0x1
+#define PALMAS_GPADC_RT_CTRL 0x2
+#define PALMAS_GPADC_AUTO_CTRL 0x3
+#define PALMAS_GPADC_STATUS 0x4
+#define PALMAS_GPADC_RT_SELECT 0x5
+#define PALMAS_GPADC_RT_CONV0_LSB 0x6
+#define PALMAS_GPADC_RT_CONV0_MSB 0x7
+#define PALMAS_GPADC_AUTO_SELECT 0x8
+#define PALMAS_GPADC_AUTO_CONV0_LSB 0x9
+#define PALMAS_GPADC_AUTO_CONV0_MSB 0xA
+#define PALMAS_GPADC_AUTO_CONV1_LSB 0xB
+#define PALMAS_GPADC_AUTO_CONV1_MSB 0xC
+#define PALMAS_GPADC_SW_SELECT 0xD
+#define PALMAS_GPADC_SW_CONV0_LSB 0xE
+#define PALMAS_GPADC_SW_CONV0_MSB 0xF
+#define PALMAS_GPADC_THRES_CONV0_LSB 0x10
+#define PALMAS_GPADC_THRES_CONV0_MSB 0x11
+#define PALMAS_GPADC_THRES_CONV1_LSB 0x12
+#define PALMAS_GPADC_THRES_CONV1_MSB 0x13
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN 0x14
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING 0x15
+
+/* Bit definitions for GPADC_CTRL1 */
+#define PALMAS_GPADC_CTRL1_RESERVED_MASK 0xc0
+#define PALMAS_GPADC_CTRL1_RESERVED_SHIFT 6
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_MASK 0x30
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH3_SHIFT 4
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_MASK 0x0c
+#define PALMAS_GPADC_CTRL1_CURRENT_SRC_CH0_SHIFT 2
+#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET 0x02
+#define PALMAS_GPADC_CTRL1_BAT_REMOVAL_DET_SHIFT 1
+#define PALMAS_GPADC_CTRL1_GPADC_FORCE 0x01
+#define PALMAS_GPADC_CTRL1_GPADC_FORCE_SHIFT 0
+
+/* Bit definitions for GPADC_CTRL2 */
+#define PALMAS_GPADC_CTRL2_RESERVED_MASK 0x06
+#define PALMAS_GPADC_CTRL2_RESERVED_SHIFT 1
+
+/* Bit definitions for GPADC_RT_CTRL */
+#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY 0x02
+#define PALMAS_GPADC_RT_CTRL_EXTEND_DELAY_SHIFT 1
+#define PALMAS_GPADC_RT_CTRL_START_POLARITY 0x01
+#define PALMAS_GPADC_RT_CTRL_START_POLARITY_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_CTRL */
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1 0x80
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV1_SHIFT 7
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0 0x40
+#define PALMAS_GPADC_AUTO_CTRL_SHUTDOWN_CONV0_SHIFT 6
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN 0x20
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN_SHIFT 5
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN 0x10
+#define PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN_SHIFT 4
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_MASK 0x0f
+#define PALMAS_GPADC_AUTO_CTRL_COUNTER_CONV_SHIFT 0
+
+/* Bit definitions for GPADC_STATUS */
+#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE 0x10
+#define PALMAS_GPADC_STATUS_GPADC_AVAILABLE_SHIFT 4
+
+/* Bit definitions for GPADC_RT_SELECT */
+#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN 0x80
+#define PALMAS_GPADC_RT_SELECT_RT_CONV_EN_SHIFT 7
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_MASK 0x0f
+#define PALMAS_GPADC_RT_SELECT_RT_CONV0_SEL_SHIFT 0
+
+/* Bit definitions for GPADC_RT_CONV0_LSB */
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_MASK 0xff
+#define PALMAS_GPADC_RT_CONV0_LSB_RT_CONV0_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_RT_CONV0_MSB */
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_MASK 0x0f
+#define PALMAS_GPADC_RT_CONV0_MSB_RT_CONV0_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_SELECT */
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_MASK 0xf0
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV1_SEL_SHIFT 4
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_MASK 0x0f
+#define PALMAS_GPADC_AUTO_SELECT_AUTO_CONV0_SEL_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_CONV0_LSB */
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_MASK 0xff
+#define PALMAS_GPADC_AUTO_CONV0_LSB_AUTO_CONV0_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_CONV0_MSB */
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_MASK 0x0f
+#define PALMAS_GPADC_AUTO_CONV0_MSB_AUTO_CONV0_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_CONV1_LSB */
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_MASK 0xff
+#define PALMAS_GPADC_AUTO_CONV1_LSB_AUTO_CONV1_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_AUTO_CONV1_MSB */
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_MASK 0x0f
+#define PALMAS_GPADC_AUTO_CONV1_MSB_AUTO_CONV1_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_SW_SELECT */
+#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN 0x80
+#define PALMAS_GPADC_SW_SELECT_SW_CONV_EN_SHIFT 7
+#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0 0x10
+#define PALMAS_GPADC_SW_SELECT_SW_START_CONV0_SHIFT 4
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_MASK 0x0f
+#define PALMAS_GPADC_SW_SELECT_SW_CONV0_SEL_SHIFT 0
+
+/* Bit definitions for GPADC_SW_CONV0_LSB */
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_MASK 0xff
+#define PALMAS_GPADC_SW_CONV0_LSB_SW_CONV0_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_SW_CONV0_MSB */
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_MASK 0x0f
+#define PALMAS_GPADC_SW_CONV0_MSB_SW_CONV0_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_THRES_CONV0_LSB */
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_MASK 0xff
+#define PALMAS_GPADC_THRES_CONV0_LSB_THRES_CONV0_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_THRES_CONV0_MSB */
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL 0x80
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL_SHIFT 7
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_MASK 0x0f
+#define PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_THRES_CONV1_LSB */
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_MASK 0xff
+#define PALMAS_GPADC_THRES_CONV1_LSB_THRES_CONV1_LSB_SHIFT 0
+
+/* Bit definitions for GPADC_THRES_CONV1_MSB */
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL 0x80
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL_SHIFT 7
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_MASK 0x0f
+#define PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_MSB_SHIFT 0
+
+/* Bit definitions for GPADC_SMPS_ILMONITOR_EN */
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN 0x20
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_EN_SHIFT 5
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT 0x10
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_REXT_SHIFT 4
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_MASK 0x0f
+#define PALMAS_GPADC_SMPS_ILMONITOR_EN_SMPS_ILMON_SEL_SHIFT 0
+
+/* Bit definitions for GPADC_SMPS_VSEL_MONITORING */
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE 0x80
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_ACTIVE_PHASE_SHIFT 7
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_MASK 0x7f
+#define PALMAS_GPADC_SMPS_VSEL_MONITORING_SMPS_VSEL_MONITORING_SHIFT 0
+
+/* Registers for function GPADC */
+#define PALMAS_GPADC_TRIM1 0x0
+#define PALMAS_GPADC_TRIM2 0x1
+#define PALMAS_GPADC_TRIM3 0x2
+#define PALMAS_GPADC_TRIM4 0x3
+#define PALMAS_GPADC_TRIM5 0x4
+#define PALMAS_GPADC_TRIM6 0x5
+#define PALMAS_GPADC_TRIM7 0x6
+#define PALMAS_GPADC_TRIM8 0x7
+#define PALMAS_GPADC_TRIM9 0x8
+#define PALMAS_GPADC_TRIM10 0x9
+#define PALMAS_GPADC_TRIM11 0xA
+#define PALMAS_GPADC_TRIM12 0xB
+#define PALMAS_GPADC_TRIM13 0xC
+#define PALMAS_GPADC_TRIM14 0xD
+#define PALMAS_GPADC_TRIM15 0xE
+#define PALMAS_GPADC_TRIM16 0xF
+
+#endif /* __LINUX_MFD_PALMAS_H */
diff --git a/include/linux/mfd/rc5t583.h b/include/linux/mfd/rc5t583.h
index 0b64b19d81ab..c42fe92a727d 100644
--- a/include/linux/mfd/rc5t583.h
+++ b/include/linux/mfd/rc5t583.h
@@ -250,6 +250,26 @@ enum {
RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
};
+enum {
+ RC5T583_REGULATOR_DC0,
+ RC5T583_REGULATOR_DC1,
+ RC5T583_REGULATOR_DC2,
+ RC5T583_REGULATOR_DC3,
+ RC5T583_REGULATOR_LDO0,
+ RC5T583_REGULATOR_LDO1,
+ RC5T583_REGULATOR_LDO2,
+ RC5T583_REGULATOR_LDO3,
+ RC5T583_REGULATOR_LDO4,
+ RC5T583_REGULATOR_LDO5,
+ RC5T583_REGULATOR_LDO6,
+ RC5T583_REGULATOR_LDO7,
+ RC5T583_REGULATOR_LDO8,
+ RC5T583_REGULATOR_LDO9,
+
+ /* Should be last entry */
+ RC5T583_REGULATOR_MAX,
+};
+
struct rc5t583 {
struct device *dev;
struct regmap *regmap;
@@ -273,11 +293,20 @@ struct rc5t583 {
* The board specific data is provided through this structure.
* @irq_base: Irq base number on which this device registers their interrupts.
* @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ * @regulator_deepsleep_slot: The slot number on which device goes to sleep
+ * in device sleep mode.
+ * @regulator_ext_pwr_control: External power request regulator control. The
+ * regulator output enable/disable is controlled by the external
+ * power request input state.
+ * @reg_init_data: Regulator init data.
*/
struct rc5t583_platform_data {
int irq_base;
bool enable_shutdown;
+ int regulator_deepsleep_slot[RC5T583_REGULATOR_MAX];
+ unsigned long regulator_ext_pwr_control[RC5T583_REGULATOR_MAX];
+ struct regulator_init_data *reg_init_data[RC5T583_REGULATOR_MAX];
};
static inline int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val)
diff --git a/include/linux/mfd/s5m87xx/s5m-core.h b/include/linux/mfd/s5m87xx/s5m-core.h
index a7480b57f92d..21603b42f22f 100644
--- a/include/linux/mfd/s5m87xx/s5m-core.h
+++ b/include/linux/mfd/s5m87xx/s5m-core.h
@@ -335,6 +335,7 @@ extern int s5m_reg_update(struct s5m87xx_dev *s5m87xx, u8 reg, u8 val, u8 mask);
struct s5m_platform_data {
struct s5m_regulator_data *regulators;
+ struct s5m_opmode_data *opmode;
int device_type;
int num_regulators;
diff --git a/include/linux/mfd/s5m87xx/s5m-pmic.h b/include/linux/mfd/s5m87xx/s5m-pmic.h
index a72a5d27e62e..7c719f20f58a 100644
--- a/include/linux/mfd/s5m87xx/s5m-pmic.h
+++ b/include/linux/mfd/s5m87xx/s5m-pmic.h
@@ -58,6 +58,8 @@ enum s5m8767_regulators {
S5M8767_REG_MAX,
};
+#define S5M8767_ENCTRL_SHIFT 6
+
/* S5M8763 regulator ids */
enum s5m8763_regulators {
S5M8763_LDO1,
@@ -97,4 +99,31 @@ struct s5m_regulator_data {
struct regulator_init_data *initdata;
};
+/*
+ * s5m_opmode_data - regulator operation mode data
+ * @id: regulator id
+ * @mode: regulator operation mode
+ */
+struct s5m_opmode_data {
+ int id;
+ int mode;
+};
+
+/*
+ * s5m regulator operation mode
+ * S5M_OPMODE_OFF Regulator always OFF
+ * S5M_OPMODE_ON Regulator always ON
+ * S5M_OPMODE_LOWPOWER Regulator is on in low-power mode
+ * S5M_OPMODE_SUSPEND Regulator is changed by PWREN pin
+ * If PWREN is high, regulator is on
+ * If PWREN is low, regulator is off
+ */
+
+enum s5m_opmode {
+ S5M_OPMODE_OFF,
+ S5M_OPMODE_ON,
+ S5M_OPMODE_LOWPOWER,
+ S5M_OPMODE_SUSPEND,
+};
+
#endif /* __LINUX_MFD_S5M_PMIC_H */
diff --git a/include/linux/mfd/tps65090.h b/include/linux/mfd/tps65090.h
index 38e31c55adbb..6bc31d854626 100644
--- a/include/linux/mfd/tps65090.h
+++ b/include/linux/mfd/tps65090.h
@@ -22,6 +22,19 @@
#ifndef __LINUX_MFD_TPS65090_H
#define __LINUX_MFD_TPS65090_H
+#include <linux/irq.h>
+
+struct tps65090 {
+ struct mutex lock;
+ struct device *dev;
+ struct i2c_client *client;
+ struct regmap *rmap;
+ struct irq_chip irq_chip;
+ struct mutex irq_lock;
+ int irq_base;
+ unsigned int id;
+};
+
struct tps65090_subdev_info {
int id;
const char *name;
diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h
index b19176eab44d..f350fd0ba1df 100644
--- a/include/linux/mfd/tps6586x.h
+++ b/include/linux/mfd/tps6586x.h
@@ -68,6 +68,7 @@ struct tps6586x_subdev_info {
int id;
const char *name;
void *platform_data;
+ struct device_node *of_node;
};
struct tps6586x_platform_data {
diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
index 1d7a3f7b3b5d..dcc9631b3052 100644
--- a/include/linux/mfd/wm831x/pdata.h
+++ b/include/linux/mfd/wm831x/pdata.h
@@ -26,7 +26,7 @@ struct wm831x_backlight_pdata {
struct wm831x_backup_pdata {
int charger_enable;
int no_constant_voltage; /** Disable constant voltage charging */
- int vlim; /** Voltage limit in milivolts */
+ int vlim; /** Voltage limit in millivolts */
int ilim; /** Current limit in microamps */
};
diff --git a/include/linux/mfd/wm8994/core.h b/include/linux/mfd/wm8994/core.h
index 9eff2a351ec5..6695c3ec4518 100644
--- a/include/linux/mfd/wm8994/core.h
+++ b/include/linux/mfd/wm8994/core.h
@@ -17,6 +17,7 @@
#include <linux/mutex.h>
#include <linux/interrupt.h>
+#include <linux/regmap.h>
enum wm8994_type {
WM8994 = 0,
@@ -26,7 +27,6 @@ enum wm8994_type {
struct regulator_dev;
struct regulator_bulk_data;
-struct regmap;
#define WM8994_NUM_GPIO_REGS 11
#define WM8994_NUM_LDO_REGS 2
@@ -94,17 +94,17 @@ static inline int wm8994_request_irq(struct wm8994 *wm8994, int irq,
irq_handler_t handler, const char *name,
void *data)
{
- if (!wm8994->irq_base)
+ if (!wm8994->irq_data)
return -EINVAL;
- return request_threaded_irq(wm8994->irq_base + irq, NULL, handler,
- IRQF_TRIGGER_RISING, name,
+ return request_threaded_irq(regmap_irq_get_virq(wm8994->irq_data, irq),
+ NULL, handler, IRQF_TRIGGER_RISING, name,
data);
}
static inline void wm8994_free_irq(struct wm8994 *wm8994, int irq, void *data)
{
- if (!wm8994->irq_base)
+ if (!wm8994->irq_data)
return;
- free_irq(wm8994->irq_base + irq, data);
+ free_irq(regmap_irq_get_virq(wm8994->irq_data, irq), data);
}
int wm8994_irq_init(struct wm8994 *wm8994);
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 6d028247f79d..6e27fa99e8b9 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -98,6 +98,12 @@ enum {
MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55
};
+enum {
+ MLX4_DEV_CAP_FLAG2_RSS = 1LL << 0,
+ MLX4_DEV_CAP_FLAG2_RSS_TOP = 1LL << 1,
+ MLX4_DEV_CAP_FLAG2_RSS_XOR = 1LL << 2
+};
+
#define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90)
enum {
@@ -292,11 +298,13 @@ struct mlx4_caps {
u32 max_msg_sz;
u32 page_size_cap;
u64 flags;
+ u64 flags2;
u32 bmme_flags;
u32 reserved_lkey;
u16 stat_rate_support;
u8 port_width_cap[MLX4_MAX_PORTS + 1];
int max_gso_sz;
+ int max_rss_tbl_sz;
int reserved_qps_cnt[MLX4_NUM_QP_REGION];
int reserved_qps;
int reserved_qps_base[MLX4_NUM_QP_REGION];
diff --git a/include/linux/mlx4/qp.h b/include/linux/mlx4/qp.h
index 96005d75893c..338388ba260a 100644
--- a/include/linux/mlx4/qp.h
+++ b/include/linux/mlx4/qp.h
@@ -234,7 +234,8 @@ struct mlx4_wqe_mlx_seg {
u8 owner;
u8 reserved1[2];
u8 opcode;
- u8 reserved2[3];
+ __be16 sched_prio;
+ u8 reserved2;
u8 size;
/*
* [17] VL15
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 74aa71bea1e4..7d5c37f24c63 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -896,10 +896,8 @@ int zap_vma_ptes(struct vm_area_struct *vma, unsigned long address,
unsigned long size);
void zap_page_range(struct vm_area_struct *vma, unsigned long address,
unsigned long size, struct zap_details *);
-void unmap_vmas(struct mmu_gather *tlb,
- struct vm_area_struct *start_vma, unsigned long start_addr,
- unsigned long end_addr, unsigned long *nr_accounted,
- struct zap_details *);
+void unmap_vmas(struct mmu_gather *tlb, struct vm_area_struct *start_vma,
+ unsigned long start, unsigned long end);
/**
* mm_walk - callbacks for walk_page_range
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index dff711509661..41aa49b74821 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -30,7 +30,7 @@
/*
* PAGE_ALLOC_COSTLY_ORDER is the order at which allocations are deemed
* costly to service. That is between allocation orders which should
- * coelesce naturally under reasonable reclaim pressure and those which
+ * coalesce naturally under reasonable reclaim pressure and those which
* will not.
*/
#define PAGE_ALLOC_COSTLY_ORDER 3
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 501da4cb8a6d..5db93821f9c7 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -132,10 +132,12 @@ struct usb_device_id {
#define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200
#define HID_ANY_ID (~0)
+#define HID_BUS_ANY 0xffff
+#define HID_GROUP_ANY 0x0000
struct hid_device_id {
__u16 bus;
- __u16 pad1;
+ __u16 group;
__u32 vendor;
__u32 product;
kernel_ulong_t driver_data
diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h
index ea36486378d8..1b14d25162cb 100644
--- a/include/linux/moduleparam.h
+++ b/include/linux/moduleparam.h
@@ -320,7 +320,8 @@ extern int parse_args(const char *name,
unsigned num,
s16 level_min,
s16 level_max,
- int (*unknown)(char *param, char *val));
+ int (*unknown)(char *param, char *val,
+ const char *doing));
/* Called by module remove. */
#ifdef CONFIG_SYSFS
diff --git a/include/linux/mtd/ubi.h b/include/linux/mtd/ubi.h
index db4836bed514..c3918a0684fe 100644
--- a/include/linux/mtd/ubi.h
+++ b/include/linux/mtd/ubi.h
@@ -25,6 +25,9 @@
#include <linux/types.h>
#include <mtd/ubi-user.h>
+/* All voumes/LEBs */
+#define UBI_ALL -1
+
/*
* enum ubi_open_mode - UBI volume open mode constants.
*
@@ -208,14 +211,15 @@ void ubi_close_volume(struct ubi_volume_desc *desc);
int ubi_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset,
int len, int check);
int ubi_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf,
- int offset, int len, int dtype);
+ int offset, int len);
int ubi_leb_change(struct ubi_volume_desc *desc, int lnum, const void *buf,
- int len, int dtype);
+ int len);
int ubi_leb_erase(struct ubi_volume_desc *desc, int lnum);
int ubi_leb_unmap(struct ubi_volume_desc *desc, int lnum);
-int ubi_leb_map(struct ubi_volume_desc *desc, int lnum, int dtype);
+int ubi_leb_map(struct ubi_volume_desc *desc, int lnum);
int ubi_is_mapped(struct ubi_volume_desc *desc, int lnum);
int ubi_sync(int ubi_num);
+int ubi_flush(int ubi_num, int vol_id, int lnum);
/*
* This function is the same as the 'ubi_leb_read()' function, but it does not
@@ -226,25 +230,4 @@ static inline int ubi_read(struct ubi_volume_desc *desc, int lnum, char *buf,
{
return ubi_leb_read(desc, lnum, buf, offset, len, 0);
}
-
-/*
- * This function is the same as the 'ubi_leb_write()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_write(struct ubi_volume_desc *desc, int lnum,
- const void *buf, int offset, int len)
-{
- return ubi_leb_write(desc, lnum, buf, offset, len, UBI_UNKNOWN);
-}
-
-/*
- * This function is the same as the 'ubi_leb_change()' functions, but it does
- * not have the data type argument.
- */
-static inline int ubi_change(struct ubi_volume_desc *desc, int lnum,
- const void *buf, int len)
-{
- return ubi_leb_change(desc, lnum, buf, len, UBI_UNKNOWN);
-}
-
#endif /* !__LINUX_UBI_H__ */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index b0f6f22723c3..e7fd468f7126 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1155,7 +1155,6 @@ struct net_device {
struct in_device __rcu *ip_ptr; /* IPv4 specific data */
struct dn_dev __rcu *dn_ptr; /* DECnet specific data */
struct inet6_dev __rcu *ip6_ptr; /* IPv6 specific data */
- void *ec_ptr; /* Econet specific data */
void *ax25_ptr; /* AX.25 specific data */
struct wireless_dev *ieee80211_ptr; /* IEEE 802.11 specific data,
assign before registering */
@@ -2143,7 +2142,6 @@ extern struct sk_buff * napi_get_frags(struct napi_struct *napi);
extern gro_result_t napi_frags_finish(struct napi_struct *napi,
struct sk_buff *skb,
gro_result_t ret);
-extern struct sk_buff * napi_frags_skb(struct napi_struct *napi);
extern gro_result_t napi_gro_frags(struct napi_struct *napi);
static inline void napi_free_frags(struct napi_struct *napi)
diff --git a/include/linux/of.h b/include/linux/of.h
index fa7fb1d97458..2ec1083af7ff 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -193,6 +193,17 @@ extern struct device_node *of_get_next_child(const struct device_node *node,
for (child = of_get_next_child(parent, NULL); child != NULL; \
child = of_get_next_child(parent, child))
+static inline int of_get_child_count(const struct device_node *np)
+{
+ struct device_node *child;
+ int num = 0;
+
+ for_each_child_of_node(np, child)
+ num++;
+
+ return num;
+}
+
extern struct device_node *of_find_node_with_property(
struct device_node *from, const char *prop_name);
#define for_each_node_with_property(dn, prop_name) \
@@ -259,6 +270,37 @@ extern void of_detach_node(struct device_node *);
#endif
#define of_match_ptr(_ptr) (_ptr)
+
+/*
+ * struct property *prop;
+ * const __be32 *p;
+ * u32 u;
+ *
+ * of_property_for_each_u32(np, "propname", prop, p, u)
+ * printk("U32 value: %x\n", u);
+ */
+const __be32 *of_prop_next_u32(struct property *prop, const __be32 *cur,
+ u32 *pu);
+#define of_property_for_each_u32(np, propname, prop, p, u) \
+ for (prop = of_find_property(np, propname, NULL), \
+ p = of_prop_next_u32(prop, NULL, &u); \
+ p; \
+ p = of_prop_next_u32(prop, p, &u))
+
+/*
+ * struct property *prop;
+ * const char *s;
+ *
+ * of_property_for_each_string(np, "propname", prop, s)
+ * printk("String value: %s\n", s);
+ */
+const char *of_prop_next_string(struct property *prop, const char *cur);
+#define of_property_for_each_string(np, propname, prop, s) \
+ for (prop = of_find_property(np, propname, NULL), \
+ s = of_prop_next_string(prop, NULL); \
+ s; \
+ s = of_prop_next_string(prop, s))
+
#else /* CONFIG_OF */
static inline bool of_have_populated_dt(void)
@@ -269,6 +311,11 @@ static inline bool of_have_populated_dt(void)
#define for_each_child_of_node(parent, child) \
while (0)
+static inline int of_get_child_count(const struct device_node *np)
+{
+ return 0;
+}
+
static inline int of_device_is_compatible(const struct device_node *device,
const char *name)
{
@@ -349,6 +396,10 @@ static inline int of_machine_is_compatible(const char *compat)
#define of_match_ptr(_ptr) NULL
#define of_match_node(_matches, _node) NULL
+#define of_property_for_each_u32(np, propname, prop, p, u) \
+ while (0)
+#define of_property_for_each_string(np, propname, prop, s) \
+ while (0)
#endif /* CONFIG_OF */
/**
diff --git a/include/linux/of_serial.h b/include/linux/of_serial.h
new file mode 100644
index 000000000000..4a73ed80b4c0
--- /dev/null
+++ b/include/linux/of_serial.h
@@ -0,0 +1,17 @@
+#ifndef __LINUX_OF_SERIAL_H
+#define __LINUX_OF_SERIAL_H
+
+/*
+ * FIXME remove this file when tegra finishes conversion to open firmware,
+ * expectation is that all quirks will then be self-contained in
+ * drivers/tty/serial/of_serial.c.
+ */
+#ifdef CONFIG_ARCH_TEGRA
+extern void tegra_serial_handle_break(struct uart_port *port);
+#else
+static inline void tegra_serial_handle_break(struct uart_port *port)
+{
+}
+#endif
+
+#endif /* __LINUX_OF_SERIAL */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index e444f5b49118..17b7b5b01b4a 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -375,11 +375,18 @@ struct pci_host_bridge_window {
};
struct pci_host_bridge {
- struct list_head list;
+ struct device dev;
struct pci_bus *bus; /* root bus */
struct list_head windows; /* pci_host_bridge_windows */
+ void (*release_fn)(struct pci_host_bridge *);
+ void *release_data;
};
+#define to_pci_host_bridge(n) container_of(n, struct pci_host_bridge, dev)
+void pci_set_host_bridge_release(struct pci_host_bridge *bridge,
+ void (*release_fn)(struct pci_host_bridge *),
+ void *release_data);
+
/*
* The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
* to P2P or CardBus bridge windows) go in a table. Additional ones (for
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index 21638ae14e07..2b9f82c037c9 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -166,60 +166,6 @@ extern phys_addr_t per_cpu_ptr_to_phys(void *addr);
(typeof(type) __percpu *)__alloc_percpu(sizeof(type), __alignof__(type))
/*
- * Optional methods for optimized non-lvalue per-cpu variable access.
- *
- * @var can be a percpu variable or a field of it and its size should
- * equal char, int or long. percpu_read() evaluates to a lvalue and
- * all others to void.
- *
- * These operations are guaranteed to be atomic.
- * The generic versions disable interrupts. Archs are
- * encouraged to implement single-instruction alternatives which don't
- * require protection.
- */
-#ifndef percpu_read
-# define percpu_read(var) \
- ({ \
- typeof(var) *pr_ptr__ = &(var); \
- typeof(var) pr_ret__; \
- pr_ret__ = get_cpu_var(*pr_ptr__); \
- put_cpu_var(*pr_ptr__); \
- pr_ret__; \
- })
-#endif
-
-#define __percpu_generic_to_op(var, val, op) \
-do { \
- typeof(var) *pgto_ptr__ = &(var); \
- get_cpu_var(*pgto_ptr__) op val; \
- put_cpu_var(*pgto_ptr__); \
-} while (0)
-
-#ifndef percpu_write
-# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =)
-#endif
-
-#ifndef percpu_add
-# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=)
-#endif
-
-#ifndef percpu_sub
-# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=)
-#endif
-
-#ifndef percpu_and
-# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=)
-#endif
-
-#ifndef percpu_or
-# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=)
-#endif
-
-#ifndef percpu_xor
-# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=)
-#endif
-
-/*
* Branching function to split up a function into a set of functions that
* are called for different scalar sizes of the objects handled.
*/
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index ddbb6a901f65..f32578634d9d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -1132,11 +1132,14 @@ struct perf_sample_data {
struct perf_branch_stack *br_stack;
};
-static inline void perf_sample_data_init(struct perf_sample_data *data, u64 addr)
+static inline void perf_sample_data_init(struct perf_sample_data *data,
+ u64 addr, u64 period)
{
+ /* remaining struct members initialized in perf_prepare_sample() */
data->addr = addr;
data->raw = NULL;
data->br_stack = NULL;
+ data->period = period;
}
extern void perf_output_sample(struct perf_output_handle *handle,
diff --git a/include/linux/pinctrl/consumer.h b/include/linux/pinctrl/consumer.h
index 191e72688481..6dd96fb45482 100644
--- a/include/linux/pinctrl/consumer.h
+++ b/include/linux/pinctrl/consumer.h
@@ -36,6 +36,9 @@ extern struct pinctrl_state * __must_check pinctrl_lookup_state(
const char *name);
extern int pinctrl_select_state(struct pinctrl *p, struct pinctrl_state *s);
+extern struct pinctrl * __must_check devm_pinctrl_get(struct device *dev);
+extern void devm_pinctrl_put(struct pinctrl *p);
+
#else /* !CONFIG_PINCTRL */
static inline int pinctrl_request_gpio(unsigned gpio)
@@ -79,6 +82,15 @@ static inline int pinctrl_select_state(struct pinctrl *p,
return 0;
}
+static inline struct pinctrl * __must_check devm_pinctrl_get(struct device *dev)
+{
+ return NULL;
+}
+
+static inline void devm_pinctrl_put(struct pinctrl *p)
+{
+}
+
#endif /* CONFIG_PINCTRL */
static inline struct pinctrl * __must_check pinctrl_get_select(
@@ -113,6 +125,38 @@ static inline struct pinctrl * __must_check pinctrl_get_select_default(
return pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
}
+static inline struct pinctrl * __must_check devm_pinctrl_get_select(
+ struct device *dev, const char *name)
+{
+ struct pinctrl *p;
+ struct pinctrl_state *s;
+ int ret;
+
+ p = devm_pinctrl_get(dev);
+ if (IS_ERR(p))
+ return p;
+
+ s = pinctrl_lookup_state(p, name);
+ if (IS_ERR(s)) {
+ devm_pinctrl_put(p);
+ return ERR_PTR(PTR_ERR(s));
+ }
+
+ ret = pinctrl_select_state(p, s);
+ if (ret < 0) {
+ devm_pinctrl_put(p);
+ return ERR_PTR(ret);
+ }
+
+ return p;
+}
+
+static inline struct pinctrl * __must_check devm_pinctrl_get_select_default(
+ struct device *dev)
+{
+ return devm_pinctrl_get_select(dev, PINCTRL_STATE_DEFAULT);
+}
+
#ifdef CONFIG_PINCONF
extern int pin_config_get(const char *dev_name, const char *name,
diff --git a/include/linux/pinctrl/machine.h b/include/linux/pinctrl/machine.h
index e4d1de742502..7d22ab00343f 100644
--- a/include/linux/pinctrl/machine.h
+++ b/include/linux/pinctrl/machine.h
@@ -154,7 +154,7 @@ struct pinctrl_map {
extern int pinctrl_register_mappings(struct pinctrl_map const *map,
unsigned num_maps);
-
+extern void pinctrl_provide_dummies(void);
#else
static inline int pinctrl_register_mappings(struct pinctrl_map const *map,
@@ -163,5 +163,8 @@ static inline int pinctrl_register_mappings(struct pinctrl_map const *map,
return 0;
}
-#endif /* !CONFIG_PINMUX */
+static inline void pinctrl_provide_dummies(void)
+{
+}
+#endif /* !CONFIG_PINCTRL */
#endif
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
index ec431f03362d..e7a720104a47 100644
--- a/include/linux/pinctrl/pinconf.h
+++ b/include/linux/pinctrl/pinconf.h
@@ -25,7 +25,6 @@ struct seq_file;
* @pin_config_get: get the config of a certain pin, if the requested config
* is not available on this controller this should return -ENOTSUPP
* and if it is available but disabled it should return -EINVAL
- * @pin_config_get: get the config of a certain pin
* @pin_config_set: configure an individual pin
* @pin_config_group_get: get configurations for an entire pin group
* @pin_config_group_set: configure all pins in a group
@@ -33,6 +32,8 @@ struct seq_file;
* per-device info for a certain pin in debugfs
* @pin_config_group_dbg_show: optional debugfs display hook that will provide
* per-device info for a certain group in debugfs
+ * @pin_config_config_dbg_show: optional debugfs display hook that will decode
+ * and display a driver's pin configuration parameter
*/
struct pinconf_ops {
#ifdef CONFIG_GENERIC_PINCONF
@@ -56,6 +57,9 @@ struct pinconf_ops {
void (*pin_config_group_dbg_show) (struct pinctrl_dev *pctldev,
struct seq_file *s,
unsigned selector);
+ void (*pin_config_config_dbg_show) (struct pinctrl_dev *pctldev,
+ struct seq_file *s,
+ unsigned long config);
};
#endif
diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
index 3920e28b4da7..634608dc6c89 100644
--- a/include/linux/pinctrl/pinctrl-state.h
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -2,5 +2,18 @@
* Standard pin control state definitions
*/
+/**
+ * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
+ * into as default, usually this means the pins are up and ready to
+ * be used by the device driver. This state is commonly used by
+ * hogs to configure muxing and pins at boot.
+ * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
+ * when the pins are idle. Could typically be set from a
+ * pm_runtime_suspend() operation.
+ * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
+ * when the pins are sleeping. Could typically be set from a
+ * common suspend() function.
+ */
#define PINCTRL_STATE_DEFAULT "default"
#define PINCTRL_STATE_IDLE "idle"
+#define PINCTRL_STATE_SLEEP "sleep"
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 4e9f0788c221..3b894a668d32 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -21,9 +21,11 @@
struct device;
struct pinctrl_dev;
+struct pinctrl_map;
struct pinmux_ops;
struct pinconf_ops;
struct gpio_chip;
+struct device_node;
/**
* struct pinctrl_pin_desc - boards/machines provide information on their
@@ -64,17 +66,24 @@ struct pinctrl_gpio_range {
/**
* struct pinctrl_ops - global pin control operations, to be implemented by
* pin controller drivers.
- * @list_groups: list the number of selectable named groups available
- * in this pinmux driver, the core will begin on 0 and call this
- * repeatedly as long as it returns >= 0 to enumerate the groups
+ * @get_groups_count: Returns the count of total number of groups registered.
* @get_group_name: return the group name of the pin group
* @get_group_pins: return an array of pins corresponding to a certain
* group selector @pins, and the size of the array in @num_pins
* @pin_dbg_show: optional debugfs display hook that will provide per-device
* info for a certain pin in debugfs
+ * @dt_node_to_map: parse a device tree "pin configuration node", and create
+ * mapping table entries for it. These are returned through the @map and
+ * @num_maps output parameters. This function is optional, and may be
+ * omitted for pinctrl drivers that do not support device tree.
+ * @dt_free_map: free mapping table entries created via @dt_node_to_map. The
+ * top-level @map pointer must be freed, along with any dynamically
+ * allocated members of the mapping table entries themselves. This
+ * function is optional, and may be omitted for pinctrl drivers that do
+ * not support device tree.
*/
struct pinctrl_ops {
- int (*list_groups) (struct pinctrl_dev *pctldev, unsigned selector);
+ int (*get_groups_count) (struct pinctrl_dev *pctldev);
const char *(*get_group_name) (struct pinctrl_dev *pctldev,
unsigned selector);
int (*get_group_pins) (struct pinctrl_dev *pctldev,
@@ -83,6 +92,11 @@ struct pinctrl_ops {
unsigned *num_pins);
void (*pin_dbg_show) (struct pinctrl_dev *pctldev, struct seq_file *s,
unsigned offset);
+ int (*dt_node_to_map) (struct pinctrl_dev *pctldev,
+ struct device_node *np_config,
+ struct pinctrl_map **map, unsigned *num_maps);
+ void (*dt_free_map) (struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps);
};
/**
diff --git a/include/linux/pinctrl/pinmux.h b/include/linux/pinctrl/pinmux.h
index 47e9237edd47..1818dcbdd9ab 100644
--- a/include/linux/pinctrl/pinmux.h
+++ b/include/linux/pinctrl/pinmux.h
@@ -23,15 +23,14 @@ struct pinctrl_dev;
/**
* struct pinmux_ops - pinmux operations, to be implemented by pin controller
* drivers that support pinmuxing
- * @request: called by the core to see if a certain pin can be made available
+ * @request: called by the core to see if a certain pin can be made
* available for muxing. This is called by the core to acquire the pins
* before selecting any actual mux setting across a function. The driver
* is allowed to answer "no" by returning a negative error code
* @free: the reverse function of the request() callback, frees a pin after
* being requested
- * @list_functions: list the number of selectable named functions available
- * in this pinmux driver, the core will begin on 0 and call this
- * repeatedly as long as it returns >= 0 to enumerate mux settings
+ * @get_functions_count: returns number of selectable named functions available
+ * in this pinmux driver
* @get_function_name: return the function name of the muxing selector,
* called by the core to figure out which mux setting it shall map a
* certain device to
@@ -62,7 +61,7 @@ struct pinctrl_dev;
struct pinmux_ops {
int (*request) (struct pinctrl_dev *pctldev, unsigned offset);
int (*free) (struct pinctrl_dev *pctldev, unsigned offset);
- int (*list_functions) (struct pinctrl_dev *pctldev, unsigned selector);
+ int (*get_functions_count) (struct pinctrl_dev *pctldev);
const char *(*get_function_name) (struct pinctrl_dev *pctldev,
unsigned selector);
int (*get_function_groups) (struct pinctrl_dev *pctldev,
diff --git a/include/linux/platform_data/at91_adc.h b/include/linux/platform_data/at91_adc.h
new file mode 100644
index 000000000000..e15745b4f3a5
--- /dev/null
+++ b/include/linux/platform_data/at91_adc.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2011 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#ifndef _AT91_ADC_H_
+#define _AT91_ADC_H_
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base: Base offset for the channel data registers
+ * @drdy_mask: Mask of the DRDY field in the relevant registers
+ (Interruptions registers mostly)
+ * @status_register: Offset of the Interrupt Status Register
+ * @trigger_register: Offset of the Trigger setup register
+ */
+struct at91_adc_reg_desc {
+ u8 channel_base;
+ u32 drdy_mask;
+ u8 status_register;
+ u8 trigger_register;
+};
+
+/**
+ * struct at91_adc_trigger - description of triggers
+ * @name: name of the trigger advertised to the user
+ * @value: value to set in the ADC's trigger setup register
+ to enable the trigger
+ * @is_external: Does the trigger rely on an external pin?
+ */
+struct at91_adc_trigger {
+ const char *name;
+ u8 value;
+ bool is_external;
+};
+
+/**
+ * struct at91_adc_data - platform data for ADC driver
+ * @channels_used: channels in use on the board as a bitmask
+ * @num_channels: global number of channels available on the board
+ * @registers: Registers definition on the board
+ * @startup_time: startup time of the ADC in microseconds
+ * @trigger_list: Triggers available in the ADC
+ * @trigger_number: Number of triggers available in the ADC
+ * @use_external_triggers: does the board has external triggers availables
+ * @vref: Reference voltage for the ADC in millivolts
+ */
+struct at91_adc_data {
+ unsigned long channels_used;
+ u8 num_channels;
+ struct at91_adc_reg_desc *registers;
+ u8 startup_time;
+ struct at91_adc_trigger *trigger_list;
+ u8 trigger_number;
+ bool use_external_triggers;
+ u16 vref;
+};
+
+extern void __init at91_add_device_adc(struct at91_adc_data *data);
+#endif
diff --git a/include/linux/platform_data/ehci-sh.h b/include/linux/platform_data/ehci-sh.h
new file mode 100644
index 000000000000..5c15a738e116
--- /dev/null
+++ b/include/linux/platform_data/ehci-sh.h
@@ -0,0 +1,28 @@
+/*
+ * EHCI SuperH driver platform data
+ *
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __USB_EHCI_SH_H
+#define __USB_EHCI_SH_H
+
+struct ehci_sh_platdata {
+ void (*phy_init)(void); /* Phy init function */
+};
+
+#endif /* __USB_EHCI_SH_H */
diff --git a/include/linux/platform_data/emif_plat.h b/include/linux/platform_data/emif_plat.h
new file mode 100644
index 000000000000..03378ca84061
--- /dev/null
+++ b/include/linux/platform_data/emif_plat.h
@@ -0,0 +1,128 @@
+/*
+ * Definitions for TI EMIF device platform data
+ *
+ * Copyright (C) 2012 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __EMIF_PLAT_H
+#define __EMIF_PLAT_H
+
+/* Low power modes - EMIF_PWR_MGMT_CTRL */
+#define EMIF_LP_MODE_DISABLE 0
+#define EMIF_LP_MODE_CLOCK_STOP 1
+#define EMIF_LP_MODE_SELF_REFRESH 2
+#define EMIF_LP_MODE_PWR_DN 4
+
+/* Hardware capabilities */
+#define EMIF_HW_CAPS_LL_INTERFACE 0x00000001
+
+/*
+ * EMIF IP Revisions
+ * EMIF4D - Used in OMAP4
+ * EMIF4D5 - Used in OMAP5
+ */
+#define EMIF_4D 1
+#define EMIF_4D5 2
+
+/*
+ * PHY types
+ * ATTILAPHY - Used in OMAP4
+ * INTELLIPHY - Used in OMAP5
+ */
+#define EMIF_PHY_TYPE_ATTILAPHY 1
+#define EMIF_PHY_TYPE_INTELLIPHY 2
+
+/* Custom config requests */
+#define EMIF_CUSTOM_CONFIG_LPMODE 0x00000001
+#define EMIF_CUSTOM_CONFIG_TEMP_ALERT_POLL_INTERVAL 0x00000002
+
+#ifndef __ASSEMBLY__
+/**
+ * struct ddr_device_info - All information about the DDR device except AC
+ * timing parameters
+ * @type: Device type (LPDDR2-S4, LPDDR2-S2 etc)
+ * @density: Device density
+ * @io_width: Bus width
+ * @cs1_used: Whether there is a DDR device attached to the second
+ * chip-select(CS1) of this EMIF instance
+ * @cal_resistors_per_cs: Whether there is one calibration resistor per
+ * chip-select or whether it's a single one for both
+ * @manufacturer: Manufacturer name string
+ */
+struct ddr_device_info {
+ u32 type;
+ u32 density;
+ u32 io_width;
+ u32 cs1_used;
+ u32 cal_resistors_per_cs;
+ char manufacturer[10];
+};
+
+/**
+ * struct emif_custom_configs - Custom configuration parameters/policies
+ * passed from the platform layer
+ * @mask: Mask to indicate which configs are requested
+ * @lpmode: LPMODE to be used in PWR_MGMT_CTRL register
+ * @lpmode_timeout_performance: Timeout before LPMODE entry when higher
+ * performance is desired at the cost of power (typically
+ * at higher OPPs)
+ * @lpmode_timeout_power: Timeout before LPMODE entry when better power
+ * savings is desired and performance is not important
+ * (typically at lower loads indicated by lower OPPs)
+ * @lpmode_freq_threshold: The DDR frequency threshold to identify between
+ * the above two cases:
+ * timeout = (freq >= lpmode_freq_threshold) ?
+ * lpmode_timeout_performance :
+ * lpmode_timeout_power;
+ * @temp_alert_poll_interval_ms: LPDDR2 MR4 polling interval at nominal
+ * temperature(in milliseconds). When temperature is high
+ * polling is done 4 times as frequently.
+ */
+struct emif_custom_configs {
+ u32 mask;
+ u32 lpmode;
+ u32 lpmode_timeout_performance;
+ u32 lpmode_timeout_power;
+ u32 lpmode_freq_threshold;
+ u32 temp_alert_poll_interval_ms;
+};
+
+/**
+ * struct emif_platform_data - Platform data passed on EMIF platform
+ * device creation. Used by the driver.
+ * @hw_caps: Hw capabilities of the EMIF IP in the respective SoC
+ * @device_info: Device info structure containing information such
+ * as type, bus width, density etc
+ * @timings: Timings information from device datasheet passed
+ * as an array of 'struct lpddr2_timings'. Can be NULL
+ * if if default timings are ok
+ * @timings_arr_size: Size of the timings array. Depends on the number
+ * of different frequencies for which timings data
+ * is provided
+ * @min_tck: Minimum value of some timing parameters in terms
+ * of number of cycles. Can be NULL if default values
+ * are ok
+ * @custom_configs: Custom configurations requested by SoC or board
+ * code and the data for them. Can be NULL if default
+ * configurations done by the driver are ok. See
+ * documentation for 'struct emif_custom_configs' for
+ * more details
+ */
+struct emif_platform_data {
+ u32 hw_caps;
+ struct ddr_device_info *device_info;
+ const struct lpddr2_timings *timings;
+ u32 timings_arr_size;
+ const struct lpddr2_min_tck *min_tck;
+ struct emif_custom_configs *custom_configs;
+ u32 ip_rev;
+ u32 phy_type;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* __LINUX_EMIF_H */
diff --git a/include/linux/platform_data/gpio-em.h b/include/linux/platform_data/gpio-em.h
new file mode 100644
index 000000000000..573edfb046c4
--- /dev/null
+++ b/include/linux/platform_data/gpio-em.h
@@ -0,0 +1,10 @@
+#ifndef __GPIO_EM_H__
+#define __GPIO_EM_H__
+
+struct gpio_em_config {
+ unsigned int gpio_base;
+ unsigned int irq_base;
+ unsigned int number_of_pins;
+};
+
+#endif /* __GPIO_EM_H__ */
diff --git a/include/linux/platform_data/ina2xx.h b/include/linux/platform_data/ina2xx.h
new file mode 100644
index 000000000000..9abc0ca7259b
--- /dev/null
+++ b/include/linux/platform_data/ina2xx.h
@@ -0,0 +1,19 @@
+/*
+ * Driver for Texas Instruments INA219, INA226 power monitor chips
+ *
+ * Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * For further information, see the Documentation/hwmon/ina2xx file.
+ */
+
+/**
+ * struct ina2xx_platform_data - ina2xx info
+ * @shunt_uohms shunt resistance in microohms
+ */
+struct ina2xx_platform_data {
+ long shunt_uohms;
+};
diff --git a/include/linux/platform_data/s3c-hsotg.h b/include/linux/platform_data/s3c-hsotg.h
new file mode 100644
index 000000000000..97ec12c2ded4
--- /dev/null
+++ b/include/linux/platform_data/s3c-hsotg.h
@@ -0,0 +1,35 @@
+/* include/linux/platform_data/s3c-hsotg.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hsotg_dmamode {
+ S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */
+ S3C_HSOTG_DMA_ONLY, /* always use DMA */
+ S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+ enum s3c_hsotg_dmamode dma;
+ unsigned int is_osc:1;
+ int phy_type;
+
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/include/linux/platform_data/tegra_usb.h b/include/linux/platform_data/tegra_usb.h
index 6bca5b569acb..66c673fef408 100644
--- a/include/linux/platform_data/tegra_usb.h
+++ b/include/linux/platform_data/tegra_usb.h
@@ -26,6 +26,7 @@ struct tegra_ehci_platform_data {
/* power down the phy on bus suspend */
int power_down_on_bus_suspend;
void *phy_config;
+ int vbus_gpio;
};
#endif /* _TEGRA_USB_H_ */
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 715305e05123..f067e60a3832 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -544,8 +544,6 @@ struct dev_pm_info {
unsigned long active_jiffies;
unsigned long suspended_jiffies;
unsigned long accounting_timestamp;
- ktime_t suspend_time;
- s64 max_time_suspended_ns;
struct dev_pm_qos_request *pq_req;
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 91f8286106ea..30f794eb3826 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -14,6 +14,7 @@
#include <linux/pm.h>
#include <linux/err.h>
#include <linux/of.h>
+#include <linux/notifier.h>
enum gpd_status {
GPD_STATE_ACTIVE = 0, /* PM domain is active */
@@ -70,9 +71,9 @@ struct generic_pm_domain {
int (*power_on)(struct generic_pm_domain *domain);
s64 power_on_latency_ns;
struct gpd_dev_ops dev_ops;
- s64 break_even_ns; /* Power break even for the entire domain. */
s64 max_off_time_ns; /* Maximum allowed "suspended" time. */
- ktime_t power_off_time;
+ bool max_off_time_changed;
+ bool cached_power_down_ok;
struct device_node *of_node; /* Node in device tree */
};
@@ -93,13 +94,17 @@ struct gpd_timing_data {
s64 start_latency_ns;
s64 save_state_latency_ns;
s64 restore_state_latency_ns;
- s64 break_even_ns;
+ s64 effective_constraint_ns;
+ bool constraint_changed;
+ bool cached_stop_ok;
};
struct generic_pm_domain_data {
struct pm_domain_data base;
struct gpd_dev_ops ops;
struct gpd_timing_data td;
+ struct notifier_block nb;
+ struct mutex lock;
bool need_restore;
bool always_on;
};
@@ -141,6 +146,7 @@ static inline int pm_genpd_of_add_device(struct device_node *genpd_node,
extern int pm_genpd_remove_device(struct generic_pm_domain *genpd,
struct device *dev);
extern void pm_genpd_dev_always_on(struct device *dev, bool val);
+extern void pm_genpd_dev_need_restore(struct device *dev, bool val);
extern int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_subdomain);
extern int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd,
@@ -184,6 +190,7 @@ static inline int pm_genpd_remove_device(struct generic_pm_domain *genpd,
return -ENOSYS;
}
static inline void pm_genpd_dev_always_on(struct device *dev, bool val) {}
+static inline void pm_genpd_dev_need_restore(struct device *dev, bool val) {}
static inline int pm_genpd_add_subdomain(struct generic_pm_domain *genpd,
struct generic_pm_domain *new_sd)
{
diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h
index 609daae7a014..f271860c78d5 100644
--- a/include/linux/pm_runtime.h
+++ b/include/linux/pm_runtime.h
@@ -150,9 +150,6 @@ static inline void pm_runtime_set_autosuspend_delay(struct device *dev,
static inline unsigned long pm_runtime_autosuspend_expiration(
struct device *dev) { return 0; }
-static inline void pm_runtime_update_max_time_suspended(struct device *dev,
- s64 delta_ns) {}
-
#endif /* !CONFIG_PM_RUNTIME */
static inline int pm_runtime_idle(struct device *dev)
diff --git a/include/linux/pm_wakeup.h b/include/linux/pm_wakeup.h
index d9f05113e5fb..569781faa504 100644
--- a/include/linux/pm_wakeup.h
+++ b/include/linux/pm_wakeup.h
@@ -33,12 +33,15 @@
*
* @total_time: Total time this wakeup source has been active.
* @max_time: Maximum time this wakeup source has been continuously active.
- * @last_time: Monotonic clock when the wakeup source's was activated last time.
+ * @last_time: Monotonic clock when the wakeup source's was touched last time.
+ * @prevent_sleep_time: Total time this source has been preventing autosleep.
* @event_count: Number of signaled wakeup events.
* @active_count: Number of times the wakeup sorce was activated.
* @relax_count: Number of times the wakeup sorce was deactivated.
- * @hit_count: Number of times the wakeup sorce might abort system suspend.
+ * @expire_count: Number of times the wakeup source's timeout has expired.
+ * @wakeup_count: Number of times the wakeup source might abort suspend.
* @active: Status of the wakeup source.
+ * @has_timeout: The wakeup source has been activated with a timeout.
*/
struct wakeup_source {
const char *name;
@@ -49,11 +52,15 @@ struct wakeup_source {
ktime_t total_time;
ktime_t max_time;
ktime_t last_time;
+ ktime_t start_prevent_time;
+ ktime_t prevent_sleep_time;
unsigned long event_count;
unsigned long active_count;
unsigned long relax_count;
- unsigned long hit_count;
- unsigned int active:1;
+ unsigned long expire_count;
+ unsigned long wakeup_count;
+ bool active:1;
+ bool autosleep_enabled:1;
};
#ifdef CONFIG_PM_SLEEP
diff --git a/include/linux/prctl.h b/include/linux/prctl.h
index e0cfec2490aa..78b76e24cc7e 100644
--- a/include/linux/prctl.h
+++ b/include/linux/prctl.h
@@ -124,4 +124,19 @@
#define PR_SET_CHILD_SUBREAPER 36
#define PR_GET_CHILD_SUBREAPER 37
+/*
+ * If no_new_privs is set, then operations that grant new privileges (i.e.
+ * execve) will either fail or not grant them. This affects suid/sgid,
+ * file capabilities, and LSMs.
+ *
+ * Operations that merely manipulate or drop existing privileges (setresuid,
+ * capset, etc.) will still work. Drop those privileges if you want them gone.
+ *
+ * Changing LSM security domain is considered a new privilege. So, for example,
+ * asking selinux for a specific new context (e.g. with runcon) will result
+ * in execve returning -EPERM.
+ */
+#define PR_SET_NO_NEW_PRIVS 38
+#define PR_GET_NO_NEW_PRIVS 39
+
#endif /* _LINUX_PRCTL_H */
diff --git a/include/linux/printk.h b/include/linux/printk.h
index 0525927f203f..1bec2f7a2d42 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -95,8 +95,19 @@ extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);
#ifdef CONFIG_PRINTK
+asmlinkage __printf(5, 0)
+int vprintk_emit(int facility, int level,
+ const char *dict, size_t dictlen,
+ const char *fmt, va_list args);
+
asmlinkage __printf(1, 0)
int vprintk(const char *fmt, va_list args);
+
+asmlinkage __printf(5, 6) __cold
+asmlinkage int printk_emit(int facility, int level,
+ const char *dict, size_t dictlen,
+ const char *fmt, ...);
+
asmlinkage __printf(1, 2) __cold
int printk(const char *fmt, ...);
@@ -289,6 +300,8 @@ extern void dump_stack(void) __cold;
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#endif
+extern const struct file_operations kmsg_fops;
+
enum {
DUMP_PREFIX_NONE,
DUMP_PREFIX_ADDRESS,
diff --git a/include/linux/pstore_ram.h b/include/linux/pstore_ram.h
new file mode 100644
index 000000000000..7ed7fd4dba49
--- /dev/null
+++ b/include/linux/pstore_ram.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright (C) 2010 Marco Stornelli <marco.stornelli@gmail.com>
+ * Copyright (C) 2011 Kees Cook <keescook@chromium.org>
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_PSTORE_RAM_H__
+#define __LINUX_PSTORE_RAM_H__
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/types.h>
+#include <linux/init.h>
+
+struct persistent_ram_buffer;
+
+struct persistent_ram_descriptor {
+ const char *name;
+ phys_addr_t size;
+};
+
+struct persistent_ram {
+ phys_addr_t start;
+ phys_addr_t size;
+
+ int num_descs;
+ struct persistent_ram_descriptor *descs;
+
+ struct list_head node;
+};
+
+struct persistent_ram_zone {
+ phys_addr_t paddr;
+ size_t size;
+ void *vaddr;
+ struct persistent_ram_buffer *buffer;
+ size_t buffer_size;
+
+ /* ECC correction */
+ bool ecc;
+ char *par_buffer;
+ char *par_header;
+ struct rs_control *rs_decoder;
+ int corrected_bytes;
+ int bad_blocks;
+ int ecc_block_size;
+ int ecc_size;
+ int ecc_symsize;
+ int ecc_poly;
+
+ char *old_log;
+ size_t old_log_size;
+};
+
+int persistent_ram_early_init(struct persistent_ram *ram);
+
+struct persistent_ram_zone * __init persistent_ram_new(phys_addr_t start,
+ size_t size,
+ bool ecc);
+void persistent_ram_free(struct persistent_ram_zone *prz);
+struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
+ bool ecc);
+
+int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
+ unsigned int count);
+
+size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
+void *persistent_ram_old(struct persistent_ram_zone *prz);
+void persistent_ram_free_old(struct persistent_ram_zone *prz);
+ssize_t persistent_ram_ecc_string(struct persistent_ram_zone *prz,
+ char *str, size_t len);
+
+/*
+ * Ramoops platform data
+ * @mem_size memory size for ramoops
+ * @mem_address physical memory address to contain ramoops
+ */
+
+struct ramoops_platform_data {
+ unsigned long mem_size;
+ unsigned long mem_address;
+ unsigned long record_size;
+ int dump_oops;
+ bool ecc;
+};
+
+#endif
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 5c719627c2aa..597e4fdb97fe 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -58,6 +58,7 @@
#define PTRACE_EVENT_EXEC 4
#define PTRACE_EVENT_VFORK_DONE 5
#define PTRACE_EVENT_EXIT 6
+#define PTRACE_EVENT_SECCOMP 7
/* Extended result codes which enabled by means other than options. */
#define PTRACE_EVENT_STOP 128
@@ -69,8 +70,9 @@
#define PTRACE_O_TRACEEXEC (1 << PTRACE_EVENT_EXEC)
#define PTRACE_O_TRACEVFORKDONE (1 << PTRACE_EVENT_VFORK_DONE)
#define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT)
+#define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP)
-#define PTRACE_O_MASK 0x0000007f
+#define PTRACE_O_MASK 0x000000ff
#include <asm/ptrace.h>
@@ -98,6 +100,7 @@
#define PT_TRACE_EXEC PT_EVENT_FLAG(PTRACE_EVENT_EXEC)
#define PT_TRACE_VFORK_DONE PT_EVENT_FLAG(PTRACE_EVENT_VFORK_DONE)
#define PT_TRACE_EXIT PT_EVENT_FLAG(PTRACE_EVENT_EXIT)
+#define PT_TRACE_SECCOMP PT_EVENT_FLAG(PTRACE_EVENT_SECCOMP)
/* single stepping state bits (used on ARM and PA-RISC) */
#define PT_SINGLESTEP_BIT 31
diff --git a/include/linux/raid/md_p.h b/include/linux/raid/md_p.h
index 8c0a3adc5df5..ee753536ab70 100644
--- a/include/linux/raid/md_p.h
+++ b/include/linux/raid/md_p.h
@@ -233,7 +233,10 @@ struct mdp_superblock_1 {
__le32 delta_disks; /* change in number of raid_disks */
__le32 new_layout; /* new layout */
__le32 new_chunk; /* new chunk size (512byte sectors) */
- __u8 pad1[128-124]; /* set to 0 when written */
+ __le32 new_offset; /* signed number to add to data_offset in new
+ * layout. 0 == no-change. This can be
+ * different on each device in the array.
+ */
/* constant this-device information - 64 bytes */
__le64 data_offset; /* sector start of data, often 0 */
@@ -281,10 +284,18 @@ struct mdp_superblock_1 {
* active device with same 'role'.
* 'recovery_offset' is also set.
*/
+#define MD_FEATURE_RESHAPE_BACKWARDS 32 /* Reshape doesn't change number
+ * of devices, but is going
+ * backwards anyway.
+ */
+#define MD_FEATURE_NEW_OFFSET 64 /* new_offset must be honoured */
#define MD_FEATURE_ALL (MD_FEATURE_BITMAP_OFFSET \
|MD_FEATURE_RECOVERY_OFFSET \
|MD_FEATURE_RESHAPE_ACTIVE \
|MD_FEATURE_BAD_BLOCKS \
- |MD_FEATURE_REPLACEMENT)
+ |MD_FEATURE_REPLACEMENT \
+ |MD_FEATURE_RESHAPE_BACKWARDS \
+ |MD_FEATURE_NEW_OFFSET \
+ )
#endif
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index 53272e9860a7..640c69ceec96 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -99,8 +99,20 @@ extern const struct raid6_calls raid6_altivec2;
extern const struct raid6_calls raid6_altivec4;
extern const struct raid6_calls raid6_altivec8;
+struct raid6_recov_calls {
+ void (*data2)(int, size_t, int, int, void **);
+ void (*datap)(int, size_t, int, void **);
+ int (*valid)(void);
+ const char *name;
+ int priority;
+};
+
+extern const struct raid6_recov_calls raid6_recov_intx1;
+extern const struct raid6_recov_calls raid6_recov_ssse3;
+
/* Algorithm list */
extern const struct raid6_calls * const raid6_algos[];
+extern const struct raid6_recov_calls *const raid6_recov_algos[];
int raid6_select_algo(void);
/* Return values from chk_syndrome */
@@ -111,14 +123,16 @@ int raid6_select_algo(void);
/* Galois field tables */
extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
+extern const u8 raid6_vgfmul[256][32] __attribute__((aligned(256)));
extern const u8 raid6_gfexp[256] __attribute__((aligned(256)));
extern const u8 raid6_gfinv[256] __attribute__((aligned(256)));
extern const u8 raid6_gfexi[256] __attribute__((aligned(256)));
/* Recovery routines */
-void raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+extern void (*raid6_2data_recov)(int disks, size_t bytes, int faila, int failb,
void **ptrs);
-void raid6_datap_recov(int disks, size_t bytes, int faila, void **ptrs);
+extern void (*raid6_datap_recov)(int disks, size_t bytes, int faila,
+ void **ptrs);
void raid6_dual_recov(int disks, size_t bytes, int faila, int failb,
void **ptrs);
diff --git a/include/linux/ramoops.h b/include/linux/ramoops.h
deleted file mode 100644
index 484fef81cd3a..000000000000
--- a/include/linux/ramoops.h
+++ /dev/null
@@ -1,17 +0,0 @@
-#ifndef __RAMOOPS_H
-#define __RAMOOPS_H
-
-/*
- * Ramoops platform data
- * @mem_size memory size for ramoops
- * @mem_address physical memory address to contain ramoops
- */
-
-struct ramoops_platform_data {
- unsigned long mem_size;
- unsigned long mem_address;
- unsigned long record_size;
- int dump_oops;
-};
-
-#endif
diff --git a/include/linux/rational.h b/include/linux/rational.h
index 4f532fcd9eea..bfa6a2bcfb32 100644
--- a/include/linux/rational.h
+++ b/include/linux/rational.h
@@ -1,7 +1,7 @@
/*
* rational fractions
*
- * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <os@emlix.com>
+ * Copyright (C) 2009 emlix GmbH, Oskar Schirmer <oskar@scara.com>
*
* helper functions when coping with rational numbers,
* e.g. when calculating optimum numerator/denominator pairs for
diff --git a/include/linux/rculist.h b/include/linux/rculist.h
index d079290843a9..e0f0fab20415 100644
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -30,6 +30,7 @@
* This is only for internal list manipulation where we know
* the prev/next entries already!
*/
+#ifndef CONFIG_DEBUG_LIST
static inline void __list_add_rcu(struct list_head *new,
struct list_head *prev, struct list_head *next)
{
@@ -38,6 +39,10 @@ static inline void __list_add_rcu(struct list_head *new,
rcu_assign_pointer(list_next_rcu(prev), new);
next->prev = new;
}
+#else
+extern void __list_add_rcu(struct list_head *new,
+ struct list_head *prev, struct list_head *next);
+#endif
/**
* list_add_rcu - add a new entry to rcu-protected list
@@ -108,7 +113,7 @@ static inline void list_add_tail_rcu(struct list_head *new,
*/
static inline void list_del_rcu(struct list_head *entry)
{
- __list_del(entry->prev, entry->next);
+ __list_del_entry(entry);
entry->prev = LIST_POISON2;
}
@@ -228,18 +233,43 @@ static inline void list_splice_init_rcu(struct list_head *list,
})
/**
- * list_first_entry_rcu - get the first element from a list
+ * Where are list_empty_rcu() and list_first_entry_rcu()?
+ *
+ * Implementing those functions following their counterparts list_empty() and
+ * list_first_entry() is not advisable because they lead to subtle race
+ * conditions as the following snippet shows:
+ *
+ * if (!list_empty_rcu(mylist)) {
+ * struct foo *bar = list_first_entry_rcu(mylist, struct foo, list_member);
+ * do_something(bar);
+ * }
+ *
+ * The list may not be empty when list_empty_rcu checks it, but it may be when
+ * list_first_entry_rcu rereads the ->next pointer.
+ *
+ * Rereading the ->next pointer is not a problem for list_empty() and
+ * list_first_entry() because they would be protected by a lock that blocks
+ * writers.
+ *
+ * See list_first_or_null_rcu for an alternative.
+ */
+
+/**
+ * list_first_or_null_rcu - get the first element from a list
* @ptr: the list head to take the element from.
* @type: the type of the struct this is embedded in.
* @member: the name of the list_struct within the struct.
*
- * Note, that list is expected to be not empty.
+ * Note that if the list is empty, it returns NULL.
*
* This primitive may safely run concurrently with the _rcu list-mutation
* primitives such as list_add_rcu() as long as it's guarded by rcu_read_lock().
*/
-#define list_first_entry_rcu(ptr, type, member) \
- list_entry_rcu((ptr)->next, type, member)
+#define list_first_or_null_rcu(ptr, type, member) \
+ ({struct list_head *__ptr = (ptr); \
+ struct list_head __rcu *__next = list_next_rcu(__ptr); \
+ likely(__ptr != __next) ? container_of(__next, type, member) : NULL; \
+ })
/**
* list_for_each_entry_rcu - iterate over rcu list of given type
diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h
index 20fb776a1d4a..26d1a47591f1 100644
--- a/include/linux/rcupdate.h
+++ b/include/linux/rcupdate.h
@@ -184,12 +184,14 @@ static inline int rcu_preempt_depth(void)
/* Internal to kernel */
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
+extern void rcu_preempt_note_context_switch(void);
extern void rcu_check_callbacks(int cpu, int user);
struct notifier_block;
extern void rcu_idle_enter(void);
extern void rcu_idle_exit(void);
extern void rcu_irq_enter(void);
extern void rcu_irq_exit(void);
+extern void exit_rcu(void);
/**
* RCU_NONIDLE - Indicate idle-loop code that needs RCU readers
@@ -922,6 +924,21 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset)
kfree_call_rcu(head, (rcu_callback)offset);
}
+/*
+ * Does the specified offset indicate that the corresponding rcu_head
+ * structure can be handled by kfree_rcu()?
+ */
+#define __is_kfree_rcu_offset(offset) ((offset) < 4096)
+
+/*
+ * Helper macro for kfree_rcu() to prevent argument-expansion eyestrain.
+ */
+#define __kfree_rcu(head, offset) \
+ do { \
+ BUILD_BUG_ON(!__is_kfree_rcu_offset(offset)); \
+ call_rcu(head, (void (*)(struct rcu_head *))(unsigned long)(offset)); \
+ } while (0)
+
/**
* kfree_rcu() - kfree an object after a grace period.
* @ptr: pointer to kfree
@@ -944,6 +961,9 @@ void __kfree_rcu(struct rcu_head *head, unsigned long offset)
*
* Note that the allowable offset might decrease in the future, for example,
* to allow something like kmem_cache_free_rcu().
+ *
+ * The BUILD_BUG_ON check must not involve any function calls, hence the
+ * checks are done in macros here.
*/
#define kfree_rcu(ptr, rcu_head) \
__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
diff --git a/include/linux/rcutiny.h b/include/linux/rcutiny.h
index e93df77176d1..adb5e5a38cae 100644
--- a/include/linux/rcutiny.h
+++ b/include/linux/rcutiny.h
@@ -87,14 +87,6 @@ static inline void kfree_call_rcu(struct rcu_head *head,
#ifdef CONFIG_TINY_RCU
-static inline void rcu_preempt_note_context_switch(void)
-{
-}
-
-static inline void exit_rcu(void)
-{
-}
-
static inline int rcu_needs_cpu(int cpu)
{
return 0;
@@ -102,8 +94,6 @@ static inline int rcu_needs_cpu(int cpu)
#else /* #ifdef CONFIG_TINY_RCU */
-void rcu_preempt_note_context_switch(void);
-extern void exit_rcu(void);
int rcu_preempt_needs_cpu(void);
static inline int rcu_needs_cpu(int cpu)
@@ -116,7 +106,6 @@ static inline int rcu_needs_cpu(int cpu)
static inline void rcu_note_context_switch(int cpu)
{
rcu_sched_qs(cpu);
- rcu_preempt_note_context_switch();
}
/*
diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h
index e8ee5dd0854c..3c6083cde4fc 100644
--- a/include/linux/rcutree.h
+++ b/include/linux/rcutree.h
@@ -45,18 +45,6 @@ static inline void rcu_virt_note_context_switch(int cpu)
rcu_note_context_switch(cpu);
}
-#ifdef CONFIG_TREE_PREEMPT_RCU
-
-extern void exit_rcu(void);
-
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-static inline void exit_rcu(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
-
extern void synchronize_rcu_bh(void);
extern void synchronize_sched_expedited(void);
extern void synchronize_rcu_expedited(void);
@@ -98,13 +86,6 @@ extern void rcu_force_quiescent_state(void);
extern void rcu_bh_force_quiescent_state(void);
extern void rcu_sched_force_quiescent_state(void);
-/* A context switch is a grace period for RCU-sched and RCU-bh. */
-static inline int rcu_blocking_is_gp(void)
-{
- might_sleep(); /* Check for RCU read-side critical section. */
- return num_online_cpus() == 1;
-}
-
extern void rcu_scheduler_starting(void);
extern int rcu_scheduler_active __read_mostly;
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index a90abb6bfa64..56af22ec9aba 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -46,7 +46,13 @@ struct reg_default {
/**
* Configuration for the register map of a device.
*
+ * @name: Optional name of the regmap. Useful when a device has multiple
+ * register regions.
+ *
* @reg_bits: Number of bits in a register address, mandatory.
+ * @reg_stride: The register address stride. Valid register addresses are a
+ * multiple of this value. If set to 0, a value of 1 will be
+ * used.
* @pad_bits: Number of bits of padding between register and value.
* @val_bits: Number of bits in a register value, mandatory.
*
@@ -70,6 +76,9 @@ struct reg_default {
* @write_flag_mask: Mask to be set in the top byte of the register when doing
* a write. If both read_flag_mask and write_flag_mask are
* empty the regmap_bus default masks are used.
+ * @use_single_rw: If set, converts the bulk read and write operations into
+ * a series of single read and write operations. This is useful
+ * for device that does not support bulk read and write.
*
* @cache_type: The actual cache type.
* @reg_defaults_raw: Power on reset values for registers (for use with
@@ -77,7 +86,10 @@ struct reg_default {
* @num_reg_defaults_raw: Number of elements in reg_defaults_raw.
*/
struct regmap_config {
+ const char *name;
+
int reg_bits;
+ int reg_stride;
int pad_bits;
int val_bits;
@@ -95,20 +107,25 @@ struct regmap_config {
u8 read_flag_mask;
u8 write_flag_mask;
+
+ bool use_single_rw;
};
-typedef int (*regmap_hw_write)(struct device *dev, const void *data,
+typedef int (*regmap_hw_write)(void *context, const void *data,
size_t count);
-typedef int (*regmap_hw_gather_write)(struct device *dev,
+typedef int (*regmap_hw_gather_write)(void *context,
const void *reg, size_t reg_len,
const void *val, size_t val_len);
-typedef int (*regmap_hw_read)(struct device *dev,
+typedef int (*regmap_hw_read)(void *context,
const void *reg_buf, size_t reg_size,
void *val_buf, size_t val_size);
+typedef void (*regmap_hw_free_context)(void *context);
/**
* Description of a hardware bus for the register map infrastructure.
*
+ * @fast_io: Register IO is fast. Use a spinlock instead of a mutex
+ * to perform locking.
* @write: Write operation.
* @gather_write: Write operation with split register/value, return -ENOTSUPP
* if not implemented on a given device.
@@ -118,31 +135,42 @@ typedef int (*regmap_hw_read)(struct device *dev,
* a read.
*/
struct regmap_bus {
+ bool fast_io;
regmap_hw_write write;
regmap_hw_gather_write gather_write;
regmap_hw_read read;
+ regmap_hw_free_context free_context;
u8 read_flag_mask;
};
struct regmap *regmap_init(struct device *dev,
const struct regmap_bus *bus,
+ void *bus_context,
const struct regmap_config *config);
struct regmap *regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config);
struct regmap *regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
+struct regmap *regmap_init_mmio(struct device *dev,
+ void __iomem *regs,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init(struct device *dev,
const struct regmap_bus *bus,
+ void *bus_context,
const struct regmap_config *config);
struct regmap *devm_regmap_init_i2c(struct i2c_client *i2c,
const struct regmap_config *config);
struct regmap *devm_regmap_init_spi(struct spi_device *dev,
const struct regmap_config *config);
+struct regmap *devm_regmap_init_mmio(struct device *dev,
+ void __iomem *regs,
+ const struct regmap_config *config);
void regmap_exit(struct regmap *map);
int regmap_reinit_cache(struct regmap *map,
const struct regmap_config *config);
+struct regmap *dev_get_regmap(struct device *dev, const char *name);
int regmap_write(struct regmap *map, unsigned int reg, unsigned int val);
int regmap_raw_write(struct regmap *map, unsigned int reg,
const void *val, size_t val_len);
@@ -191,6 +219,7 @@ struct regmap_irq {
* @status_base: Base status register address.
* @mask_base: Base mask register address.
* @ack_base: Base ack address. If zero then the chip is clear on read.
+ * @irq_reg_stride: Stride to use for chips where registers are not contiguous.
*
* @num_regs: Number of registers in each control bank.
* @irqs: Descriptors for individual IRQs. Interrupt numbers are
@@ -203,6 +232,7 @@ struct regmap_irq_chip {
unsigned int status_base;
unsigned int mask_base;
unsigned int ack_base;
+ unsigned int irq_reg_stride;
int num_regs;
@@ -217,6 +247,7 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
struct regmap_irq_chip_data **data);
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
int regmap_irq_chip_get_base(struct regmap_irq_chip_data *data);
+int regmap_irq_get_virq(struct regmap_irq_chip_data *data, int irq);
#else
@@ -327,6 +358,13 @@ static inline int regmap_register_patch(struct regmap *map,
return -EINVAL;
}
+static inline struct regmap *dev_get_regmap(struct device *dev,
+ const char *name)
+{
+ WARN_ONCE(1, "regmap API is disabled");
+ return NULL;
+}
+
#endif
#endif
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fa8b55b8191c..b0432cc2b169 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -19,6 +19,7 @@
#include <linux/notifier.h>
#include <linux/regulator/consumer.h>
+struct regmap;
struct regulator_dev;
struct regulator_init_data;
@@ -45,6 +46,7 @@ enum regulator_status {
* The driver should select the voltage closest to min_uV.
* @set_voltage_sel: Set the voltage for the regulator using the specified
* selector.
+ * @map_voltage: Convert a voltage into a selector
* @get_voltage: Return the currently configured voltage for the regulator.
* @get_voltage_sel: Return the currently configured voltage selector for the
* regulator.
@@ -90,6 +92,7 @@ struct regulator_ops {
/* get/set regulator voltage */
int (*set_voltage) (struct regulator_dev *, int min_uV, int max_uV,
unsigned *selector);
+ int (*map_voltage)(struct regulator_dev *, int min_uV, int max_uV);
int (*set_voltage_sel) (struct regulator_dev *, unsigned selector);
int (*get_voltage) (struct regulator_dev *);
int (*get_voltage_sel) (struct regulator_dev *);
@@ -148,19 +151,30 @@ enum regulator_type {
};
/**
- * struct regulator_desc - Regulator descriptor
+ * struct regulator_desc - Static regulator descriptor
*
- * Each regulator registered with the core is described with a structure of
- * this type.
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_config. This
+ * structure contains the non-varying parts of the regulator
+ * description.
*
* @name: Identifying name for the regulator.
* @supply_name: Identifying the regulator supply
* @id: Numerical identifier for the regulator.
- * @n_voltages: Number of selectors available for ops.list_voltage().
* @ops: Regulator operations table.
* @irq: Interrupt number for the regulator.
* @type: Indicates if the regulator is a voltage or current regulator.
* @owner: Module providing the regulator, used for refcounting.
+ *
+ * @n_voltages: Number of selectors available for ops.list_voltage().
+ *
+ * @min_uV: Voltage given by the lowest selector (if linear mapping)
+ * @uV_step: Voltage increase with each selector (if linear mapping)
+ *
+ * @vsel_reg: Register for selector when using regulator_regmap_X_voltage_
+ * @vsel_mask: Mask for register bitfield used for selector
+ * @enable_reg: Register for control when using regmap enable/disable ops
+ * @enable_mask: Mask for control when using regmap enable/disable ops
*/
struct regulator_desc {
const char *name;
@@ -171,6 +185,36 @@ struct regulator_desc {
int irq;
enum regulator_type type;
struct module *owner;
+
+ unsigned int min_uV;
+ unsigned int uV_step;
+
+ unsigned int vsel_reg;
+ unsigned int vsel_mask;
+ unsigned int enable_reg;
+ unsigned int enable_mask;
+};
+
+/**
+ * struct regulator_config - Dynamic regulator descriptor
+ *
+ * Each regulator registered with the core is described with a
+ * structure of this type and a struct regulator_desc. This structure
+ * contains the runtime variable parts of the regulator description.
+ *
+ * @dev: struct device for the regulator
+ * @init_data: platform provided init data, passed through by driver
+ * @driver_data: private regulator data
+ * @of_node: OpenFirmware node to parse for device tree bindings (may be
+ * NULL).
+ * @regmap: regmap to use for core regmap helpers
+ */
+struct regulator_config {
+ struct device *dev;
+ const struct regulator_init_data *init_data;
+ void *driver_data;
+ struct device_node *of_node;
+ struct regmap *regmap;
};
/*
@@ -184,7 +228,7 @@ struct regulator_desc {
* no other direct access).
*/
struct regulator_dev {
- struct regulator_desc *desc;
+ const struct regulator_desc *desc;
int exclusive;
u32 use_count;
u32 open_count;
@@ -201,6 +245,7 @@ struct regulator_dev {
struct device dev;
struct regulation_constraints *constraints;
struct regulator *supply; /* for tree */
+ struct regmap *regmap;
struct delayed_work disable_work;
int deferred_disables;
@@ -210,9 +255,9 @@ struct regulator_dev {
struct dentry *debugfs;
};
-struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
- struct device *dev, const struct regulator_init_data *init_data,
- void *driver_data, struct device_node *of_node);
+struct regulator_dev *
+regulator_register(const struct regulator_desc *regulator_desc,
+ const struct regulator_config *config);
void regulator_unregister(struct regulator_dev *rdev);
int regulator_notifier_call_chain(struct regulator_dev *rdev,
@@ -224,6 +269,18 @@ int rdev_get_id(struct regulator_dev *rdev);
int regulator_mode_to_status(unsigned int);
+int regulator_list_voltage_linear(struct regulator_dev *rdev,
+ unsigned int selector);
+int regulator_map_voltage_linear(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_map_voltage_iterate(struct regulator_dev *rdev,
+ int min_uV, int max_uV);
+int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev);
+int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel);
+int regulator_is_enabled_regmap(struct regulator_dev *rdev);
+int regulator_enable_regmap(struct regulator_dev *rdev);
+int regulator_disable_regmap(struct regulator_dev *rdev);
+
void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
#endif
diff --git a/include/linux/regulator/fixed.h b/include/linux/regulator/fixed.h
index 936a7d8c11a9..f83f7440b488 100644
--- a/include/linux/regulator/fixed.h
+++ b/include/linux/regulator/fixed.h
@@ -26,6 +26,12 @@ struct regulator_init_data;
* @gpio: GPIO to use for enable control
* set to -EINVAL if not used
* @startup_delay: Start-up time in microseconds
+ * @gpio_is_open_drain: Gpio pin is open drain or normal type.
+ * If it is open drain type then HIGH will be set
+ * through PULL-UP with setting gpio as input
+ * and low will be set as gpio-output with driven
+ * to low. For non-open-drain case, the gpio will
+ * will be in output and drive to low/high accordingly.
* @enable_high: Polarity of enable GPIO
* 1 = Active high, 0 = Active low
* @enabled_at_boot: Whether regulator has been enabled at
@@ -43,6 +49,7 @@ struct fixed_voltage_config {
int microvolts;
int gpio;
unsigned startup_delay;
+ unsigned gpio_is_open_drain:1;
unsigned enable_high:1;
unsigned enabled_at_boot:1;
struct regulator_init_data *init_data;
diff --git a/include/linux/regulator/of_regulator.h b/include/linux/regulator/of_regulator.h
index 769704f296e5..f9217965aaa3 100644
--- a/include/linux/regulator/of_regulator.h
+++ b/include/linux/regulator/of_regulator.h
@@ -6,10 +6,20 @@
#ifndef __LINUX_OF_REG_H
#define __LINUX_OF_REG_H
+struct of_regulator_match {
+ const char *name;
+ void *driver_data;
+ struct regulator_init_data *init_data;
+ struct device_node *of_node;
+};
+
#if defined(CONFIG_OF)
extern struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
struct device_node *node);
+extern int of_regulator_match(struct device *dev, struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches);
#else
static inline struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
@@ -17,6 +27,14 @@ static inline struct regulator_init_data
{
return NULL;
}
+
+static inline int of_regulator_match(struct device *dev,
+ struct device_node *node,
+ struct of_regulator_match *matches,
+ unsigned int num_matches)
+{
+ return 0;
+}
#endif /* CONFIG_OF */
#endif /* __LINUX_OF_REG_H */
diff --git a/include/linux/regulator/tps62360.h b/include/linux/regulator/tps62360.h
index 6a5c1b2c751e..a4c49394c497 100644
--- a/include/linux/regulator/tps62360.h
+++ b/include/linux/regulator/tps62360.h
@@ -26,13 +26,10 @@
#ifndef __LINUX_REGULATOR_TPS62360_H
#define __LINUX_REGULATOR_TPS62360_H
-#include <linux/regulator/machine.h>
-
/*
* struct tps62360_regulator_platform_data - tps62360 regulator platform data.
*
* @reg_init_data: The regulator init data.
- * @en_force_pwm: Enable force pwm or not.
* @en_discharge: Enable discharge the output capacitor via internal
* register.
* @en_internal_pulldn: internal pull down enable or not.
@@ -44,8 +41,7 @@
* @vsel1_def_state: Default state of vsel1. 1 if it is high else 0.
*/
struct tps62360_regulator_platform_data {
- struct regulator_init_data reg_init_data;
- bool en_force_pwm;
+ struct regulator_init_data *reg_init_data;
bool en_discharge;
bool en_internal_pulldn;
int vsel0_gpio;
diff --git a/include/linux/regulator/tps65090-regulator.h b/include/linux/regulator/tps65090-regulator.h
new file mode 100644
index 000000000000..0fa04b64db3e
--- /dev/null
+++ b/include/linux/regulator/tps65090-regulator.h
@@ -0,0 +1,50 @@
+/*
+ * Regulator driver interface for TI TPS65090 PMIC family
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __REGULATOR_TPS65090_H
+#define __REGULATOR_TPS65090_H
+
+#include <linux/regulator/machine.h>
+
+#define tps65090_rails(_name) "tps65090_"#_name
+
+enum {
+ TPS65090_ID_DCDC1,
+ TPS65090_ID_DCDC2,
+ TPS65090_ID_DCDC3,
+ TPS65090_ID_FET1,
+ TPS65090_ID_FET2,
+ TPS65090_ID_FET3,
+ TPS65090_ID_FET4,
+ TPS65090_ID_FET5,
+ TPS65090_ID_FET6,
+ TPS65090_ID_FET7,
+};
+
+/*
+ * struct tps65090_regulator_platform_data
+ *
+ * @regulator: The regulator init data.
+ * @slew_rate_uV_per_us: Slew rate microvolt per microsec.
+ */
+
+struct tps65090_regulator_platform_data {
+ struct regulator_init_data regulator;
+};
+
+#endif /* __REGULATOR_TPS65090_H */
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index da81af086eaf..fb201896a8b0 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -116,7 +116,7 @@ void res_counter_init(struct res_counter *counter, struct res_counter *parent);
*/
int __must_check res_counter_charge_locked(struct res_counter *counter,
- unsigned long val);
+ unsigned long val, bool force);
int __must_check res_counter_charge(struct res_counter *counter,
unsigned long val, struct res_counter **limit_fail_at);
int __must_check res_counter_charge_nofail(struct res_counter *counter,
diff --git a/include/linux/ring_buffer.h b/include/linux/ring_buffer.h
index 7be2e88f23fd..6c8835f74f79 100644
--- a/include/linux/ring_buffer.h
+++ b/include/linux/ring_buffer.h
@@ -96,9 +96,11 @@ __ring_buffer_alloc(unsigned long size, unsigned flags, struct lock_class_key *k
__ring_buffer_alloc((size), (flags), &__key); \
})
+#define RING_BUFFER_ALL_CPUS -1
+
void ring_buffer_free(struct ring_buffer *buffer);
-int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size);
+int ring_buffer_resize(struct ring_buffer *buffer, unsigned long size, int cpu);
void ring_buffer_change_overwrite(struct ring_buffer *buffer, int val);
@@ -129,7 +131,7 @@ ring_buffer_read(struct ring_buffer_iter *iter, u64 *ts);
void ring_buffer_iter_reset(struct ring_buffer_iter *iter);
int ring_buffer_iter_empty(struct ring_buffer_iter *iter);
-unsigned long ring_buffer_size(struct ring_buffer *buffer);
+unsigned long ring_buffer_size(struct ring_buffer *buffer, int cpu);
void ring_buffer_reset_cpu(struct ring_buffer *buffer, int cpu);
void ring_buffer_reset(struct ring_buffer *buffer);
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 81a173c0897d..28fa9d02fd59 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -855,61 +855,14 @@ enum cpu_idle_type {
#define SD_WAKE_AFFINE 0x0020 /* Wake task to waking CPU */
#define SD_PREFER_LOCAL 0x0040 /* Prefer to keep tasks local to this domain */
#define SD_SHARE_CPUPOWER 0x0080 /* Domain members share cpu power */
-#define SD_POWERSAVINGS_BALANCE 0x0100 /* Balance for power savings */
#define SD_SHARE_PKG_RESOURCES 0x0200 /* Domain members share cpu pkg resources */
#define SD_SERIALIZE 0x0400 /* Only a single load balancing instance */
#define SD_ASYM_PACKING 0x0800 /* Place busy groups earlier in the domain */
#define SD_PREFER_SIBLING 0x1000 /* Prefer to place tasks in a sibling domain */
#define SD_OVERLAP 0x2000 /* sched_domains of this level overlap */
-enum powersavings_balance_level {
- POWERSAVINGS_BALANCE_NONE = 0, /* No power saving load balance */
- POWERSAVINGS_BALANCE_BASIC, /* Fill one thread/core/package
- * first for long running threads
- */
- POWERSAVINGS_BALANCE_WAKEUP, /* Also bias task wakeups to semi-idle
- * cpu package for power savings
- */
- MAX_POWERSAVINGS_BALANCE_LEVELS
-};
-
-extern int sched_mc_power_savings, sched_smt_power_savings;
-
-static inline int sd_balance_for_mc_power(void)
-{
- if (sched_smt_power_savings)
- return SD_POWERSAVINGS_BALANCE;
-
- if (!sched_mc_power_savings)
- return SD_PREFER_SIBLING;
-
- return 0;
-}
-
-static inline int sd_balance_for_package_power(void)
-{
- if (sched_mc_power_savings | sched_smt_power_savings)
- return SD_POWERSAVINGS_BALANCE;
-
- return SD_PREFER_SIBLING;
-}
-
extern int __weak arch_sd_sibiling_asym_packing(void);
-/*
- * Optimise SD flags for power savings:
- * SD_BALANCE_NEWIDLE helps aggressive task consolidation and power savings.
- * Keep default SD flags if sched_{smt,mc}_power_saving=0
- */
-
-static inline int sd_power_saving_flags(void)
-{
- if (sched_mc_power_savings | sched_smt_power_savings)
- return SD_BALANCE_NEWIDLE;
-
- return 0;
-}
-
struct sched_group_power {
atomic_t ref;
/*
@@ -1341,6 +1294,8 @@ struct task_struct {
* execve */
unsigned in_iowait:1;
+ /* task may not gain privileges */
+ unsigned no_new_privs:1;
/* Revert to default priority/policy when forking */
unsigned sched_reset_on_fork:1;
@@ -1450,7 +1405,7 @@ struct task_struct {
uid_t loginuid;
unsigned int sessionid;
#endif
- seccomp_t seccomp;
+ struct seccomp seccomp;
/* Thread group tracking */
u32 parent_exec_id;
@@ -1905,12 +1860,22 @@ static inline void rcu_copy_process(struct task_struct *p)
INIT_LIST_HEAD(&p->rcu_node_entry);
}
+static inline void rcu_switch_from(struct task_struct *prev)
+{
+ if (prev->rcu_read_lock_nesting != 0)
+ rcu_preempt_note_context_switch();
+}
+
#else
static inline void rcu_copy_process(struct task_struct *p)
{
}
+static inline void rcu_switch_from(struct task_struct *prev)
+{
+}
+
#endif
#ifdef CONFIG_SMP
@@ -1950,7 +1915,7 @@ static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
*/
extern unsigned long long notrace sched_clock(void);
/*
- * See the comment in kernel/sched_clock.c
+ * See the comment in kernel/sched/clock.c
*/
extern u64 cpu_clock(int cpu);
extern u64 local_clock(void);
diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h
index cc7a4e9cc7ad..84f6320da50f 100644
--- a/include/linux/seccomp.h
+++ b/include/linux/seccomp.h
@@ -1,25 +1,90 @@
#ifndef _LINUX_SECCOMP_H
#define _LINUX_SECCOMP_H
-
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+
+/* Valid values for seccomp.mode and prctl(PR_SET_SECCOMP, <mode>) */
+#define SECCOMP_MODE_DISABLED 0 /* seccomp is not in use. */
+#define SECCOMP_MODE_STRICT 1 /* uses hard-coded filter. */
+#define SECCOMP_MODE_FILTER 2 /* uses user-supplied filter. */
+
+/*
+ * All BPF programs must return a 32-bit value.
+ * The bottom 16-bits are for optional return data.
+ * The upper 16-bits are ordered from least permissive values to most.
+ *
+ * The ordering ensures that a min_t() over composed return values always
+ * selects the least permissive choice.
+ */
+#define SECCOMP_RET_KILL 0x00000000U /* kill the task immediately */
+#define SECCOMP_RET_TRAP 0x00030000U /* disallow and force a SIGSYS */
+#define SECCOMP_RET_ERRNO 0x00050000U /* returns an errno */
+#define SECCOMP_RET_TRACE 0x7ff00000U /* pass to a tracer or disallow */
+#define SECCOMP_RET_ALLOW 0x7fff0000U /* allow */
+
+/* Masks for the return value sections. */
+#define SECCOMP_RET_ACTION 0x7fff0000U
+#define SECCOMP_RET_DATA 0x0000ffffU
+
+/**
+ * struct seccomp_data - the format the BPF program executes over.
+ * @nr: the system call number
+ * @arch: indicates system call convention as an AUDIT_ARCH_* value
+ * as defined in <linux/audit.h>.
+ * @instruction_pointer: at the time of the system call.
+ * @args: up to 6 system call arguments always stored as 64-bit values
+ * regardless of the architecture.
+ */
+struct seccomp_data {
+ int nr;
+ __u32 arch;
+ __u64 instruction_pointer;
+ __u64 args[6];
+};
+
+#ifdef __KERNEL__
#ifdef CONFIG_SECCOMP
#include <linux/thread_info.h>
#include <asm/seccomp.h>
-typedef struct { int mode; } seccomp_t;
-
-extern void __secure_computing(int);
-static inline void secure_computing(int this_syscall)
+struct seccomp_filter;
+/**
+ * struct seccomp - the state of a seccomp'ed process
+ *
+ * @mode: indicates one of the valid values above for controlled
+ * system calls available to a process.
+ * @filter: The metadata and ruleset for determining what system calls
+ * are allowed for a task.
+ *
+ * @filter must only be accessed from the context of current as there
+ * is no locking.
+ */
+struct seccomp {
+ int mode;
+ struct seccomp_filter *filter;
+};
+
+extern int __secure_computing(int);
+static inline int secure_computing(int this_syscall)
{
if (unlikely(test_thread_flag(TIF_SECCOMP)))
- __secure_computing(this_syscall);
+ return __secure_computing(this_syscall);
+ return 0;
+}
+
+/* A wrapper for architectures supporting only SECCOMP_MODE_STRICT. */
+static inline void secure_computing_strict(int this_syscall)
+{
+ BUG_ON(secure_computing(this_syscall) != 0);
}
extern long prctl_get_seccomp(void);
-extern long prctl_set_seccomp(unsigned long);
+extern long prctl_set_seccomp(unsigned long, char __user *);
-static inline int seccomp_mode(seccomp_t *s)
+static inline int seccomp_mode(struct seccomp *s)
{
return s->mode;
}
@@ -28,25 +93,41 @@ static inline int seccomp_mode(seccomp_t *s)
#include <linux/errno.h>
-typedef struct { } seccomp_t;
+struct seccomp { };
+struct seccomp_filter { };
-#define secure_computing(x) do { } while (0)
+static inline int secure_computing(int this_syscall) { return 0; }
+static inline void secure_computing_strict(int this_syscall) { return; }
static inline long prctl_get_seccomp(void)
{
return -EINVAL;
}
-static inline long prctl_set_seccomp(unsigned long arg2)
+static inline long prctl_set_seccomp(unsigned long arg2, char __user *arg3)
{
return -EINVAL;
}
-static inline int seccomp_mode(seccomp_t *s)
+static inline int seccomp_mode(struct seccomp *s)
{
return 0;
}
-
#endif /* CONFIG_SECCOMP */
+#ifdef CONFIG_SECCOMP_FILTER
+extern void put_seccomp_filter(struct task_struct *tsk);
+extern void get_seccomp_filter(struct task_struct *tsk);
+extern u32 seccomp_bpf_load(int off);
+#else /* CONFIG_SECCOMP_FILTER */
+static inline void put_seccomp_filter(struct task_struct *tsk)
+{
+ return;
+}
+static inline void get_seccomp_filter(struct task_struct *tsk)
+{
+ return;
+}
+#endif /* CONFIG_SECCOMP_FILTER */
+#endif /* __KERNEL__ */
#endif /* _LINUX_SECCOMP_H */
diff --git a/include/linux/security.h b/include/linux/security.h
index 673afbb8238a..ab0e091ce5fa 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -144,6 +144,7 @@ struct request_sock;
#define LSM_UNSAFE_SHARE 1
#define LSM_UNSAFE_PTRACE 2
#define LSM_UNSAFE_PTRACE_CAP 4
+#define LSM_UNSAFE_NO_NEW_PRIVS 8
#ifdef CONFIG_MMU
extern int mmap_min_addr_handler(struct ctl_table *table, int write,
@@ -639,10 +640,7 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts)
* to receive an open file descriptor via socket IPC.
* @file contains the file structure being received.
* Return 0 if permission is granted.
- *
- * Security hook for dentry
- *
- * @dentry_open
+ * @file_open
* Save open-time permission checking state for later use upon
* file_permission, and recheck access if anything has changed
* since inode_permission.
@@ -1497,7 +1495,7 @@ struct security_operations {
int (*file_send_sigiotask) (struct task_struct *tsk,
struct fown_struct *fown, int sig);
int (*file_receive) (struct file *file);
- int (*dentry_open) (struct file *file, const struct cred *cred);
+ int (*file_open) (struct file *file, const struct cred *cred);
int (*task_create) (unsigned long clone_flags);
void (*task_free) (struct task_struct *task);
@@ -1756,7 +1754,7 @@ int security_file_set_fowner(struct file *file);
int security_file_send_sigiotask(struct task_struct *tsk,
struct fown_struct *fown, int sig);
int security_file_receive(struct file *file);
-int security_dentry_open(struct file *file, const struct cred *cred);
+int security_file_open(struct file *file, const struct cred *cred);
int security_task_create(unsigned long clone_flags);
void security_task_free(struct task_struct *task);
int security_cred_alloc_blank(struct cred *cred, gfp_t gfp);
@@ -2227,8 +2225,8 @@ static inline int security_file_receive(struct file *file)
return 0;
}
-static inline int security_dentry_open(struct file *file,
- const struct cred *cred)
+static inline int security_file_open(struct file *file,
+ const struct cred *cred)
{
return 0;
}
diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h
index 6c5047dbfea3..a416e92012ef 100644
--- a/include/linux/serial_8250.h
+++ b/include/linux/serial_8250.h
@@ -38,6 +38,7 @@ struct plat_serial8250_port {
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned old);
+ void (*handle_break)(struct uart_port *);
};
/*
@@ -67,6 +68,7 @@ enum {
struct uart_port;
struct uart_8250_port;
+int serial8250_register_8250_port(struct uart_8250_port *);
int serial8250_register_port(struct uart_port *);
void serial8250_unregister_port(int line);
void serial8250_suspend_port(int line);
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index 2db407a40051..65db9928e15f 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -310,6 +310,7 @@ struct uart_port {
int (*handle_irq)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int old);
+ void (*handle_break)(struct uart_port *);
unsigned int irq; /* irq number */
unsigned long irqflags; /* irq flags */
unsigned int uartclk; /* base uart clock */
@@ -533,6 +534,10 @@ uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
static inline int uart_handle_break(struct uart_port *port)
{
struct uart_state *state = port->state;
+
+ if (port->handle_break)
+ port->handle_break(port);
+
#ifdef SUPPORT_SYSRQ
if (port->cons && port->cons->index == port->line) {
if (!port->sysrq) {
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 78779074f6e8..eb763adf9815 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -52,6 +52,8 @@ enum {
/* SCSPTR, optional */
#define SCSPTR_RTSIO (1 << 7)
#define SCSPTR_CTSIO (1 << 5)
+#define SCSPTR_SPB2IO (1 << 1)
+#define SCSPTR_SPB2DT (1 << 0)
/* Offsets into the sci_port->irqs array */
enum {
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 0a9d8f2ac519..c513b73cd7cb 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -59,7 +59,15 @@ struct clk {
unsigned int nr_freqs;
};
-#define CLK_ENABLE_ON_INIT (1 << 0)
+#define CLK_ENABLE_ON_INIT BIT(0)
+
+#define CLK_ENABLE_REG_32BIT BIT(1) /* default access size */
+#define CLK_ENABLE_REG_16BIT BIT(2)
+#define CLK_ENABLE_REG_8BIT BIT(3)
+
+#define CLK_ENABLE_REG_MASK (CLK_ENABLE_REG_32BIT | \
+ CLK_ENABLE_REG_16BIT | \
+ CLK_ENABLE_REG_8BIT)
/* drivers/sh/clk.c */
unsigned long followparent_recalc(struct clk *);
@@ -102,7 +110,7 @@ long clk_round_parent(struct clk *clk, unsigned long target,
unsigned long *best_freq, unsigned long *parent_freq,
unsigned int div_min, unsigned int div_max);
-#define SH_CLK_MSTP32(_parent, _enable_reg, _enable_bit, _flags) \
+#define SH_CLK_MSTP(_parent, _enable_reg, _enable_bit, _flags) \
{ \
.parent = _parent, \
.enable_reg = (void __iomem *)_enable_reg, \
@@ -110,7 +118,27 @@ long clk_round_parent(struct clk *clk, unsigned long target,
.flags = _flags, \
}
-int sh_clk_mstp32_register(struct clk *clks, int nr);
+#define SH_CLK_MSTP32(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_32BIT)
+
+#define SH_CLK_MSTP16(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_16BIT)
+
+#define SH_CLK_MSTP8(_p, _r, _b, _f) \
+ SH_CLK_MSTP(_p, _r, _b, _f | CLK_ENABLE_REG_8BIT)
+
+int sh_clk_mstp_register(struct clk *clks, int nr);
+
+/*
+ * MSTP registration never really cared about access size, despite the
+ * original enable/disable pairs assuming a 32-bit access. Clocks are
+ * responsible for defining their access sizes either directly or via the
+ * clock definition wrappers.
+ */
+static inline int __deprecated sh_clk_mstp32_register(struct clk *clks, int nr)
+{
+ return sh_clk_mstp_register(clks, nr);
+}
#define SH_CLK_DIV4(_parent, _reg, _shift, _div_bitmap, _flags) \
{ \
diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h
index 6aed0805927f..32383285da68 100644
--- a/include/linux/sh_intc.h
+++ b/include/linux/sh_intc.h
@@ -133,7 +133,6 @@ struct intc_desc symbol __initdata = { \
}
int register_intc_controller(struct intc_desc *desc);
-void reserve_intc_vectors(struct intc_vect *vectors, unsigned int nr_vecs);
int intc_set_priority(unsigned int irq, unsigned int prio);
int intc_irq_lookup(const char *chipname, intc_enum enum_id);
void intc_finalize(void);
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index bb47314c7179..0e501714d47f 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -562,6 +562,11 @@ extern void kfree_skb(struct sk_buff *skb);
extern void consume_skb(struct sk_buff *skb);
extern void __kfree_skb(struct sk_buff *skb);
extern struct kmem_cache *skbuff_head_cache;
+
+extern void kfree_skb_partial(struct sk_buff *skb, bool head_stolen);
+extern bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from,
+ bool *fragstolen, int *delta_truesize);
+
extern struct sk_buff *__alloc_skb(unsigned int size,
gfp_t priority, int fclone, int node);
extern struct sk_buff *build_skb(void *data, unsigned int frag_size);
@@ -1680,31 +1685,11 @@ static inline void __skb_queue_purge(struct sk_buff_head *list)
kfree_skb(skb);
}
-/**
- * __dev_alloc_skb - allocate an skbuff for receiving
- * @length: length to allocate
- * @gfp_mask: get_free_pages mask, passed to alloc_skb
- *
- * Allocate a new &sk_buff and assign it a usage count of one. The
- * buffer has unspecified headroom built in. Users should allocate
- * the headroom they think they need without accounting for the
- * built in space. The built in space is used for optimisations.
- *
- * %NULL is returned if there is no free memory.
- */
-static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
- gfp_t gfp_mask)
-{
- struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
- if (likely(skb))
- skb_reserve(skb, NET_SKB_PAD);
- return skb;
-}
-
-extern struct sk_buff *dev_alloc_skb(unsigned int length);
+extern void *netdev_alloc_frag(unsigned int fragsz);
extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
- unsigned int length, gfp_t gfp_mask);
+ unsigned int length,
+ gfp_t gfp_mask);
/**
* netdev_alloc_skb - allocate an skbuff for rx on a specific device
@@ -1720,11 +1705,25 @@ extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
* allocates memory it can be called from an interrupt.
*/
static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev,
- unsigned int length)
+ unsigned int length)
{
return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
}
+/* legacy helper around __netdev_alloc_skb() */
+static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
+ gfp_t gfp_mask)
+{
+ return __netdev_alloc_skb(NULL, length, gfp_mask);
+}
+
+/* legacy helper around netdev_alloc_skb() */
+static inline struct sk_buff *dev_alloc_skb(unsigned int length)
+{
+ return netdev_alloc_skb(NULL, length);
+}
+
+
static inline struct sk_buff *__netdev_alloc_skb_ip_align(struct net_device *dev,
unsigned int length, gfp_t gfp)
{
diff --git a/include/linux/smp.h b/include/linux/smp.h
index 10530d92c04b..717fb746c9a8 100644
--- a/include/linux/smp.h
+++ b/include/linux/smp.h
@@ -61,7 +61,7 @@ extern void smp_prepare_cpus(unsigned int max_cpus);
/*
* Bring a CPU up
*/
-extern int __cpu_up(unsigned int cpunum);
+extern int __cpu_up(unsigned int cpunum, struct task_struct *tidle);
/*
* Final polishing of CPUs
@@ -81,6 +81,8 @@ void __smp_call_function_single(int cpuid, struct call_single_data *data,
int smp_call_function_any(const struct cpumask *mask,
smp_call_func_t func, void *info, int wait);
+void kick_all_cpus_sync(void);
+
/*
* Generic and arch helpers
*/
@@ -192,6 +194,8 @@ smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
return smp_call_function_single(0, func, info, wait);
}
+static inline void kick_all_cpus_sync(void) { }
+
#endif /* !SMP */
/*
diff --git a/include/linux/spi/eeprom.h b/include/linux/spi/eeprom.h
index 306e7b1c69ed..403e007aef68 100644
--- a/include/linux/spi/eeprom.h
+++ b/include/linux/spi/eeprom.h
@@ -20,6 +20,16 @@ struct spi_eeprom {
#define EE_ADDR3 0x0004 /* 24 bit addrs */
#define EE_READONLY 0x0008 /* disallow writes */
+ /*
+ * Certain EEPROMS have a size that is larger than the number of address
+ * bytes would allow (e.g. like M95040 from ST that has 512 Byte size
+ * but uses only one address byte (A0 to A7) for addressing.) For
+ * the extra address bit (A8, A16 or A24) bit 3 of the instruction byte
+ * is used. This instruction bit is normally defined as don't care for
+ * other AT25 like chips.
+ */
+#define EE_INSTR_BIT3_IS_ADDR 0x0010
+
/* for exporting this chip's data to other kernel code */
void (*setup)(struct memory_accessor *mem, void *context);
void *context;
diff --git a/include/linux/srcu.h b/include/linux/srcu.h
index d3d5fa54f25e..55a5c52cbb25 100644
--- a/include/linux/srcu.h
+++ b/include/linux/srcu.h
@@ -29,26 +29,35 @@
#include <linux/mutex.h>
#include <linux/rcupdate.h>
+#include <linux/workqueue.h>
struct srcu_struct_array {
- int c[2];
+ unsigned long c[2];
+ unsigned long seq[2];
+};
+
+struct rcu_batch {
+ struct rcu_head *head, **tail;
};
struct srcu_struct {
- int completed;
+ unsigned completed;
struct srcu_struct_array __percpu *per_cpu_ref;
- struct mutex mutex;
+ spinlock_t queue_lock; /* protect ->batch_queue, ->running */
+ bool running;
+ /* callbacks just queued */
+ struct rcu_batch batch_queue;
+ /* callbacks try to do the first check_zero */
+ struct rcu_batch batch_check0;
+ /* callbacks done with the first check_zero and the flip */
+ struct rcu_batch batch_check1;
+ struct rcu_batch batch_done;
+ struct delayed_work work;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
#endif /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
};
-#ifndef CONFIG_PREEMPT
-#define srcu_barrier() barrier()
-#else /* #ifndef CONFIG_PREEMPT */
-#define srcu_barrier()
-#endif /* #else #ifndef CONFIG_PREEMPT */
-
#ifdef CONFIG_DEBUG_LOCK_ALLOC
int __init_srcu_struct(struct srcu_struct *sp, const char *name,
@@ -67,12 +76,33 @@ int init_srcu_struct(struct srcu_struct *sp);
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
+/**
+ * call_srcu() - Queue a callback for invocation after an SRCU grace period
+ * @sp: srcu_struct in queue the callback
+ * @head: structure to be used for queueing the SRCU callback.
+ * @func: function to be invoked after the SRCU grace period
+ *
+ * The callback function will be invoked some time after a full SRCU
+ * grace period elapses, in other words after all pre-existing SRCU
+ * read-side critical sections have completed. However, the callback
+ * function might well execute concurrently with other SRCU read-side
+ * critical sections that started after call_srcu() was invoked. SRCU
+ * read-side critical sections are delimited by srcu_read_lock() and
+ * srcu_read_unlock(), and may be nested.
+ *
+ * The callback will be invoked from process context, but must nevertheless
+ * be fast and must not block.
+ */
+void call_srcu(struct srcu_struct *sp, struct rcu_head *head,
+ void (*func)(struct rcu_head *head));
+
void cleanup_srcu_struct(struct srcu_struct *sp);
int __srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
void __srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
void synchronize_srcu(struct srcu_struct *sp);
void synchronize_srcu_expedited(struct srcu_struct *sp);
long srcu_batches_completed(struct srcu_struct *sp);
+void srcu_barrier(struct srcu_struct *sp);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
diff --git a/include/linux/suspend.h b/include/linux/suspend.h
index ac1c114c499d..cd83059fb592 100644
--- a/include/linux/suspend.h
+++ b/include/linux/suspend.h
@@ -356,8 +356,9 @@ extern int unregister_pm_notifier(struct notifier_block *nb);
extern bool events_check_enabled;
extern bool pm_wakeup_pending(void);
-extern bool pm_get_wakeup_count(unsigned int *count);
+extern bool pm_get_wakeup_count(unsigned int *count, bool block);
extern bool pm_save_wakeup_count(unsigned int count);
+extern void pm_wakep_autosleep_enabled(bool set);
static inline void lock_system_sleep(void)
{
@@ -407,6 +408,17 @@ static inline void unlock_system_sleep(void) {}
#endif /* !CONFIG_PM_SLEEP */
+#ifdef CONFIG_PM_AUTOSLEEP
+
+/* kernel/power/autosleep.c */
+void queue_up_suspend_work(void);
+
+#else /* !CONFIG_PM_AUTOSLEEP */
+
+static inline void queue_up_suspend_work(void) {}
+
+#endif /* !CONFIG_PM_AUTOSLEEP */
+
#ifdef CONFIG_ARCH_SAVE_PAGE_KEYS
/*
* The ARCH_SAVE_PAGE_KEYS functions can be used by an architecture
diff --git a/include/linux/sysfs.h b/include/linux/sysfs.h
index 0010009b2f00..381f06db2fe5 100644
--- a/include/linux/sysfs.h
+++ b/include/linux/sysfs.h
@@ -27,6 +27,7 @@ struct attribute {
const char *name;
umode_t mode;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
+ bool ignore_lockdep:1;
struct lock_class_key *key;
struct lock_class_key skey;
#endif
@@ -80,6 +81,17 @@ struct attribute_group {
#define __ATTR_NULL { .attr = { .name = NULL } }
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+#define __ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store) { \
+ .attr = {.name = __stringify(_name), .mode = _mode, \
+ .ignore_lockdep = true }, \
+ .show = _show, \
+ .store = _store, \
+}
+#else
+#define __ATTR_IGNORE_LOCKDEP __ATTR
+#endif
+
#define attr_name(_attr) (_attr).attr.name
struct file;
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index d9b42c5be088..4c5b63283377 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -426,7 +426,7 @@ struct tcp_sock {
struct sk_buff_head out_of_order_queue; /* Out of order segments go here */
- /* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */
+ /* SACKs data, these 2 need to be together (see tcp_options_write) */
struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */
struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/
diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h
index 8d03f079688c..db78775eff3b 100644
--- a/include/linux/thread_info.h
+++ b/include/linux/thread_info.h
@@ -54,6 +54,12 @@ extern long do_no_restart_syscall(struct restart_block *parm);
#ifdef __KERNEL__
+#ifdef CONFIG_DEBUG_STACK_USAGE
+# define THREADINFO_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_ZERO)
+#else
+# define THREADINFO_GFP (GFP_KERNEL | __GFP_NOTRACK)
+#endif
+
/*
* flag set/clear/test wrappers
* - pass TIF_xxxx constants to these functions
diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
index 2ef4385da6bf..3ca0269dd0b5 100644
--- a/include/linux/ti_wilink_st.h
+++ b/include/linux/ti_wilink_st.h
@@ -25,6 +25,8 @@
#ifndef TI_WILINK_ST_H
#define TI_WILINK_ST_H
+#include <linux/skbuff.h>
+
/**
* enum proto-type - The protocol on WiLink chips which share a
* common physical interface like UART.
diff --git a/include/linux/topology.h b/include/linux/topology.h
index e26db031303b..e91cd43394df 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -70,7 +70,6 @@ int arch_update_cpu_topology(void);
* Below are the 3 major initializers used in building sched_domains:
* SD_SIBLING_INIT, for SMT domains
* SD_CPU_INIT, for SMP domains
- * SD_NODE_INIT, for NUMA domains
*
* Any architecture that cares to do any tuning to these values should do so
* by defining their own arch-specific initializer in include/asm/topology.h.
@@ -99,7 +98,6 @@ int arch_update_cpu_topology(void);
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
| 1*SD_SHARE_CPUPOWER \
- | 0*SD_POWERSAVINGS_BALANCE \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| 0*SD_PREFER_SIBLING \
@@ -135,8 +133,6 @@ int arch_update_cpu_topology(void);
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
- | sd_balance_for_mc_power() \
- | sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
@@ -168,56 +164,18 @@ int arch_update_cpu_topology(void);
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
- | sd_balance_for_package_power() \
- | sd_power_saving_flags() \
, \
.last_balance = jiffies, \
.balance_interval = 1, \
}
#endif
-/* sched_domains SD_ALLNODES_INIT for NUMA machines */
-#define SD_ALLNODES_INIT (struct sched_domain) { \
- .min_interval = 64, \
- .max_interval = 64*num_online_cpus(), \
- .busy_factor = 128, \
- .imbalance_pct = 133, \
- .cache_nice_tries = 1, \
- .busy_idx = 3, \
- .idle_idx = 3, \
- .flags = 1*SD_LOAD_BALANCE \
- | 1*SD_BALANCE_NEWIDLE \
- | 0*SD_BALANCE_EXEC \
- | 0*SD_BALANCE_FORK \
- | 0*SD_BALANCE_WAKE \
- | 0*SD_WAKE_AFFINE \
- | 0*SD_SHARE_CPUPOWER \
- | 0*SD_POWERSAVINGS_BALANCE \
- | 0*SD_SHARE_PKG_RESOURCES \
- | 1*SD_SERIALIZE \
- | 0*SD_PREFER_SIBLING \
- , \
- .last_balance = jiffies, \
- .balance_interval = 64, \
-}
-
-#ifndef SD_NODES_PER_DOMAIN
-#define SD_NODES_PER_DOMAIN 16
-#endif
-
#ifdef CONFIG_SCHED_BOOK
#ifndef SD_BOOK_INIT
#error Please define an appropriate SD_BOOK_INIT in include/asm/topology.h!!!
#endif
#endif /* CONFIG_SCHED_BOOK */
-#ifdef CONFIG_NUMA
-#ifndef SD_NODE_INIT
-#error Please define an appropriate SD_NODE_INIT in include/asm/topology.h!!!
-#endif
-
-#endif /* CONFIG_NUMA */
-
#ifdef CONFIG_USE_PERCPU_NUMA_NODE_ID
DECLARE_PER_CPU(int, numa_node);
@@ -239,7 +197,7 @@ static inline int cpu_to_node(int cpu)
#ifndef set_numa_node
static inline void set_numa_node(int node)
{
- percpu_write(numa_node, node);
+ this_cpu_write(numa_node, node);
}
#endif
@@ -274,7 +232,7 @@ DECLARE_PER_CPU(int, _numa_mem_);
#ifndef set_numa_mem
static inline void set_numa_mem(int node)
{
- percpu_write(_numa_mem_, node);
+ this_cpu_write(_numa_mem_, node);
}
#endif
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 9f47ab540f65..4990ef2b1fb7 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -268,6 +268,7 @@ struct tty_struct {
struct mutex ldisc_mutex;
struct tty_ldisc *ldisc;
+ struct mutex legacy_mutex;
struct mutex termios_mutex;
spinlock_t ctrl_lock;
/* Termios values are protected by the termios mutex */
@@ -605,8 +606,12 @@ extern long vt_compat_ioctl(struct tty_struct *tty,
/* tty_mutex.c */
/* functions for preparation of BKL removal */
-extern void __lockfunc tty_lock(void) __acquires(tty_lock);
-extern void __lockfunc tty_unlock(void) __releases(tty_lock);
+extern void __lockfunc tty_lock(struct tty_struct *tty);
+extern void __lockfunc tty_unlock(struct tty_struct *tty);
+extern void __lockfunc tty_lock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
+extern void __lockfunc tty_unlock_pair(struct tty_struct *tty,
+ struct tty_struct *tty2);
/*
* this shall be called only from where BTM is held (like close)
@@ -621,9 +626,9 @@ extern void __lockfunc tty_unlock(void) __releases(tty_lock);
static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
long timeout)
{
- tty_unlock(); /* tty->ops->close holds the BTM, drop it while waiting */
+ tty_unlock(tty); /* tty->ops->close holds the BTM, drop it while waiting */
tty_wait_until_sent(tty, timeout);
- tty_lock();
+ tty_lock(tty);
}
/*
@@ -638,16 +643,16 @@ static inline void tty_wait_until_sent_from_close(struct tty_struct *tty,
*
* Do not use in new code.
*/
-#define wait_event_interruptible_tty(wq, condition) \
+#define wait_event_interruptible_tty(tty, wq, condition) \
({ \
int __ret = 0; \
if (!(condition)) { \
- __wait_event_interruptible_tty(wq, condition, __ret); \
+ __wait_event_interruptible_tty(tty, wq, condition, __ret); \
} \
__ret; \
})
-#define __wait_event_interruptible_tty(wq, condition, ret) \
+#define __wait_event_interruptible_tty(tty, wq, condition, ret) \
do { \
DEFINE_WAIT(__wait); \
\
@@ -656,9 +661,9 @@ do { \
if (condition) \
break; \
if (!signal_pending(current)) { \
- tty_unlock(); \
+ tty_unlock(tty); \
schedule(); \
- tty_lock(); \
+ tty_lock(tty); \
continue; \
} \
ret = -ERESTARTSYS; \
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index ff7dc08696a8..fb79dd8d1537 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -110,6 +110,7 @@
#include <linux/fs.h>
#include <linux/wait.h>
#include <linux/pps_kernel.h>
+#include <linux/wait.h>
struct tty_ldisc_ops {
int magic;
@@ -154,6 +155,7 @@ struct tty_ldisc_ops {
struct tty_ldisc {
struct tty_ldisc_ops *ops;
atomic_t users;
+ wait_queue_head_t wq_idle;
};
#define TTY_LDISC_MAGIC 0x5403
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 73b68d1f2cb0..dea39dc551d4 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -351,10 +351,6 @@ struct usb_bus {
int bandwidth_int_reqs; /* number of Interrupt requests */
int bandwidth_isoc_reqs; /* number of Isoc. requests */
-#ifdef CONFIG_USB_DEVICEFS
- struct dentry *usbfs_dentry; /* usbfs dentry entry for the bus */
-#endif
-
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
struct mon_bus *mon_bus; /* non-null when associated */
int monitored; /* non-zero when monitored */
@@ -382,6 +378,45 @@ enum usb_device_removable {
USB_DEVICE_FIXED,
};
+/*
+ * USB 3.0 Link Power Management (LPM) parameters.
+ *
+ * PEL and SEL are USB 3.0 Link PM latencies for device-initiated LPM exit.
+ * MEL is the USB 3.0 Link PM latency for host-initiated LPM exit.
+ * All three are stored in nanoseconds.
+ */
+struct usb3_lpm_parameters {
+ /*
+ * Maximum exit latency (MEL) for the host to send a packet to the
+ * device (either a Ping for isoc endpoints, or a data packet for
+ * interrupt endpoints), the hubs to decode the packet, and for all hubs
+ * in the path to transition the links to U0.
+ */
+ unsigned int mel;
+ /*
+ * Maximum exit latency for a device-initiated LPM transition to bring
+ * all links into U0. Abbreviated as "PEL" in section 9.4.12 of the USB
+ * 3.0 spec, with no explanation of what "P" stands for. "Path"?
+ */
+ unsigned int pel;
+
+ /*
+ * The System Exit Latency (SEL) includes PEL, and three other
+ * latencies. After a device initiates a U0 transition, it will take
+ * some time from when the device sends the ERDY to when it will finally
+ * receive the data packet. Basically, SEL should be the worse-case
+ * latency from when a device starts initiating a U0 transition to when
+ * it will get data.
+ */
+ unsigned int sel;
+ /*
+ * The idle timeout value that is currently programmed into the parent
+ * hub for this device. When the timer counts to zero, the parent hub
+ * will initiate an LPM transition to either U1 or U2.
+ */
+ int timeout;
+};
+
/**
* struct usb_device - kernel's representation of a USB device
* @devnum: device number; address on a USB bus
@@ -439,6 +474,12 @@ enum usb_device_removable {
* specific data for the device.
* @slot_id: Slot ID assigned by xHCI
* @removable: Device can be physically removed from this port
+ * @u1_params: exit latencies for USB3 U1 LPM state, and hub-initiated timeout.
+ * @u2_params: exit latencies for USB3 U2 LPM state, and hub-initiated timeout.
+ * @lpm_disable_count: Ref count used by usb_disable_lpm() and usb_enable_lpm()
+ * to keep track of the number of functions that require USB 3.0 Link Power
+ * Management to be disabled for this usb_device. This count should only
+ * be manipulated by those functions, with the bandwidth_mutex is held.
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -485,6 +526,7 @@ struct usb_device {
unsigned lpm_capable:1;
unsigned usb2_hw_lpm_capable:1;
unsigned usb2_hw_lpm_enabled:1;
+ unsigned usb3_lpm_enabled:1;
int string_langid;
/* static strings from the device */
@@ -493,12 +535,6 @@ struct usb_device {
char *serial;
struct list_head filelist;
-#ifdef CONFIG_USB_DEVICE_CLASS
- struct device *usb_classdev;
-#endif
-#ifdef CONFIG_USB_DEVICEFS
- struct dentry *usbfs_dentry;
-#endif
int maxchild;
struct usb_device **children;
@@ -517,6 +553,10 @@ struct usb_device {
struct wusb_dev *wusb_dev;
int slot_id;
enum usb_device_removable removable;
+ struct usb3_lpm_parameters u1_params;
+ struct usb3_lpm_parameters u2_params;
+ unsigned lpm_disable_count;
+ unsigned hub_initiated_lpm_disable_count;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
@@ -583,6 +623,12 @@ static inline void usb_mark_last_busy(struct usb_device *udev)
{ }
#endif
+extern int usb_disable_lpm(struct usb_device *udev);
+extern void usb_enable_lpm(struct usb_device *udev);
+/* Same as above, but these functions lock/unlock the bandwidth_mutex. */
+extern int usb_unlocked_disable_lpm(struct usb_device *udev);
+extern void usb_unlocked_enable_lpm(struct usb_device *udev);
+
/*-------------------------------------------------------------------------*/
/* for drivers using iso endpoints */
@@ -800,6 +846,8 @@ extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
struct device_driver *driver,
const char *buf, size_t count);
+extern ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf);
+
/**
* struct usbdrv_wrap - wrapper for driver-model structure
* @driver: The driver-model core driver structure.
@@ -850,6 +898,9 @@ struct usbdrv_wrap {
* for interfaces bound to this driver.
* @soft_unbind: if set to 1, the USB core will not kill URBs and disable
* endpoints before calling the driver's disconnect method.
+ * @disable_hub_initiated_lpm: if set to 0, the USB core will not allow hubs
+ * to initiate lower power link state transitions when an idle timeout
+ * occurs. Device-initiated USB 3.0 link PM will still be allowed.
*
* USB interface drivers must provide a name, probe() and disconnect()
* methods, and an id_table. Other driver fields are optional.
@@ -890,6 +941,7 @@ struct usb_driver {
struct usbdrv_wrap drvwrap;
unsigned int no_dynamic_id:1;
unsigned int supports_autosuspend:1;
+ unsigned int disable_hub_initiated_lpm:1;
unsigned int soft_unbind:1;
};
#define to_usb_driver(d) container_of(d, struct usb_driver, drvwrap.driver)
@@ -1379,6 +1431,7 @@ extern int usb_unlink_urb(struct urb *urb);
extern void usb_kill_urb(struct urb *urb);
extern void usb_poison_urb(struct urb *urb);
extern void usb_unpoison_urb(struct urb *urb);
+extern void usb_block_urb(struct urb *urb);
extern void usb_kill_anchored_urbs(struct usb_anchor *anchor);
extern void usb_poison_anchored_urbs(struct usb_anchor *anchor);
extern void usb_unpoison_anchored_urbs(struct usb_anchor *anchor);
@@ -1391,6 +1444,8 @@ extern struct urb *usb_get_from_anchor(struct usb_anchor *anchor);
extern void usb_scuttle_anchored_urbs(struct usb_anchor *anchor);
extern int usb_anchor_empty(struct usb_anchor *anchor);
+#define usb_unblock_urb usb_unpoison_urb
+
/**
* usb_urb_dir_in - check if an URB describes an IN transfer
* @urb: URB to be checked
@@ -1627,6 +1682,7 @@ static inline int usb_translate_errors(int error_code)
case 0:
case -ENOMEM:
case -ENODEV:
+ case -EOPNOTSUPP:
return error_code;
default:
return -EIO;
@@ -1652,9 +1708,6 @@ do { \
} while (0)
#endif
-#define err(format, arg...) \
- printk(KERN_ERR KBUILD_MODNAME ": " format "\n", ##arg)
-
/* debugfs stuff */
extern struct dentry *usb_debug_root;
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index f1d26b6067f1..b6c2863b2c94 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,8 @@
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
+#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8)
+
/* USB 3.0 hub remote wake mask bits, see table 10-14 */
#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index af21f3115919..d1d732c2838d 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -88,6 +88,8 @@
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
#define USB_REQ_GET_ENCRYPTION 0x0E
@@ -390,6 +392,11 @@ struct usb_endpoint_descriptor {
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
#define USB_ENDPOINT_SYNCTYPE 0x0c
#define USB_ENDPOINT_SYNC_NONE (0 << 2)
#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
@@ -592,6 +599,12 @@ static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
return __le16_to_cpu(epd->wMaxPacketSize);
}
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
/*-------------------------------------------------------------------------*/
/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
@@ -933,6 +946,51 @@ enum usb_device_state {
*/
};
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
/*-------------------------------------------------------------------------*/
/*
diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h
new file mode 100644
index 000000000000..edb90d6cfd12
--- /dev/null
+++ b/include/linux/usb/chipidea.h
@@ -0,0 +1,28 @@
+/*
+ * Platform data for the chipidea USB dual role controller
+ */
+
+#ifndef __LINUX_USB_CHIPIDEA_H
+#define __LINUX_USB_CHIPIDEA_H
+
+struct ci13xxx;
+struct ci13xxx_udc_driver {
+ const char *name;
+ /* offset of the capability registers */
+ uintptr_t capoffset;
+ unsigned power_budget;
+ unsigned long flags;
+#define CI13XXX_REGS_SHARED BIT(0)
+#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
+#define CI13XXX_PULLUP_ON_VBUS BIT(2)
+#define CI13XXX_DISABLE_STREAMING BIT(3)
+
+#define CI13XXX_CONTROLLER_RESET_EVENT 0
+#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
+ void (*notify_event) (struct ci13xxx *udc, unsigned event);
+};
+
+/* Default offset of capability registers */
+#define DEF_CAPOFFSET 0x100
+
+#endif
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index a316fba73518..9d8c3b634493 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -242,6 +242,9 @@ int usb_add_config(struct usb_composite_dev *,
struct usb_configuration *,
int (*)(struct usb_configuration *));
+void usb_remove_config(struct usb_composite_dev *,
+ struct usb_configuration *);
+
/**
* struct usb_composite_driver - groups configurations into a gadget
* @name: For diagnostics, identifies the driver.
@@ -250,6 +253,8 @@ int usb_add_config(struct usb_composite_dev *,
* @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is
* not set. If NULL a default "<system> <release> with <udc>" value
* will be used.
+ * @iSerialNumber: Used as iSerialNumber override if @dev->iSerialNumber is
+ * not set.
* @dev: Template descriptor for the device, including default device
* identifiers.
* @strings: tables of strings, keyed by identifiers assigned during bind()
@@ -280,6 +285,7 @@ struct usb_composite_driver {
const char *name;
const char *iProduct;
const char *iManufacturer;
+ const char *iSerialNumber;
const struct usb_device_descriptor *dev;
struct usb_gadget_strings **strings;
enum usb_device_speed max_speed;
diff --git a/include/linux/usb/functionfs.h b/include/linux/usb/functionfs.h
index 7587ef934ba8..a843d0851364 100644
--- a/include/linux/usb/functionfs.h
+++ b/include/linux/usb/functionfs.h
@@ -190,8 +190,10 @@ static int functionfs_ready_callback(struct ffs_data *ffs)
__attribute__((warn_unused_result, nonnull));
static void functionfs_closed_callback(struct ffs_data *ffs)
__attribute__((nonnull));
-static int functionfs_check_dev_callback(const char *dev_name)
+static void *functionfs_acquire_dev_callback(const char *dev_name)
__attribute__((warn_unused_result, nonnull));
+static void functionfs_release_dev_callback(struct ffs_data *ffs_data)
+ __attribute__((nonnull));
#endif
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
index d9f03ccc2d60..837bba604a0b 100644
--- a/include/linux/usb/gpio_vbus.h
+++ b/include/linux/usb/gpio_vbus.h
@@ -17,6 +17,7 @@
* @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
* @gpio_vbus_inverted: true if gpio_vbus is active low
* @gpio_pullup_inverted: true if gpio_pullup is active low
+ * @wakeup: configure gpio_vbus as a wake-up source
*
* The VBUS sensing GPIO should have a pulldown, which will normally be
* part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
@@ -27,4 +28,5 @@ struct gpio_vbus_mach_info {
int gpio_pullup;
bool gpio_vbus_inverted;
bool gpio_pullup_inverted;
+ bool wakeup;
};
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index d28cc78a38e4..7f855d50cdf5 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -344,6 +344,15 @@ struct hc_driver {
*/
int (*update_device)(struct usb_hcd *, struct usb_device *);
int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
+ /* USB 3.0 Link Power Management */
+ /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
+ int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
+ struct usb_device *, enum usb3_link_state state);
+ /* The xHCI host controller can still fail the command to
+ * disable the LPM timeouts, so this can return an error code.
+ */
+ int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
+ struct usb_device *, enum usb3_link_state state);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
@@ -584,29 +593,6 @@ static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
}
#endif /* CONFIG_USB_SUSPEND */
-
-/*
- * USB device fs stuff
- */
-
-#ifdef CONFIG_USB_DEVICEFS
-
-/*
- * these are expected to be called from the USB core/hub thread
- * with the kernel lock held
- */
-extern void usbfs_update_special(void);
-extern int usbfs_init(void);
-extern void usbfs_cleanup(void);
-
-#else /* CONFIG_USB_DEVICEFS */
-
-static inline void usbfs_update_special(void) {}
-static inline int usbfs_init(void) { return 0; }
-static inline void usbfs_cleanup(void) { }
-
-#endif /* CONFIG_USB_DEVICEFS */
-
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
diff --git a/include/linux/usb/isp1301.h b/include/linux/usb/isp1301.h
new file mode 100644
index 000000000000..d3a851c28b6a
--- /dev/null
+++ b/include/linux/usb/isp1301.h
@@ -0,0 +1,80 @@
+/*
+ * NXP ISP1301 USB transceiver driver
+ *
+ * Copyright (C) 2012 Roland Stigge <stigge@antcom.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_USB_ISP1301_H
+#define __LINUX_USB_ISP1301_H
+
+#include <linux/of.h>
+
+/* I2C Register definitions: */
+
+#define ISP1301_I2C_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */
+
+#define MC1_SPEED_REG (1 << 0)
+#define MC1_SUSPEND_REG (1 << 1)
+#define MC1_DAT_SE0 (1 << 2)
+#define MC1_TRANSPARENT (1 << 3)
+#define MC1_BDIS_ACON_EN (1 << 4)
+#define MC1_OE_INT_EN (1 << 5)
+#define MC1_UART_EN (1 << 6)
+#define MC1_MASK 0x7f
+
+#define ISP1301_I2C_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */
+
+#define MC2_GLOBAL_PWR_DN (1 << 0)
+#define MC2_SPD_SUSP_CTRL (1 << 1)
+#define MC2_BI_DI (1 << 2)
+#define MC2_TRANSP_BDIR0 (1 << 3)
+#define MC2_TRANSP_BDIR1 (1 << 4)
+#define MC2_AUDIO_EN (1 << 5)
+#define MC2_PSW_EN (1 << 6)
+#define MC2_EN2V7 (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */
+
+#define OTG1_DP_PULLUP (1 << 0)
+#define OTG1_DM_PULLUP (1 << 1)
+#define OTG1_DP_PULLDOWN (1 << 2)
+#define OTG1_DM_PULLDOWN (1 << 3)
+#define OTG1_ID_PULLDOWN (1 << 4)
+#define OTG1_VBUS_DRV (1 << 5)
+#define OTG1_VBUS_DISCHRG (1 << 6)
+#define OTG1_VBUS_CHRG (1 << 7)
+
+#define ISP1301_I2C_OTG_CONTROL_2 0x10 /* u8 readonly */
+
+#define OTG_B_SESS_END (1 << 6)
+#define OTG_B_SESS_VLD (1 << 7)
+
+#define ISP1301_I2C_INTERRUPT_SOURCE 0x8
+#define ISP1301_I2C_INTERRUPT_LATCH 0xA
+#define ISP1301_I2C_INTERRUPT_FALLING 0xC
+#define ISP1301_I2C_INTERRUPT_RISING 0xE
+
+#define INT_VBUS_VLD (1 << 0)
+#define INT_SESS_VLD (1 << 1)
+#define INT_DP_HI (1 << 2)
+#define INT_ID_GND (1 << 3)
+#define INT_DM_HI (1 << 4)
+#define INT_ID_FLOAT (1 << 5)
+#define INT_BDIS_ACON (1 << 6)
+#define INT_CR_INT (1 << 7)
+
+#define ISP1301_I2C_REG_CLEAR_ADDR 1 /* Register Address Modifier */
+
+struct i2c_client *isp1301_get_client(struct device_node *node);
+
+#endif /* __LINUX_USB_ISP1301_H */
diff --git a/include/linux/usb/langwell_udc.h b/include/linux/usb/langwell_udc.h
deleted file mode 100644
index 2d2d1bbad9d2..000000000000
--- a/include/linux/usb/langwell_udc.h
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Intel Langwell USB Device Controller driver
- * Copyright (C) 2008-2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#ifndef __LANGWELL_UDC_H
-#define __LANGWELL_UDC_H
-
-
-/* MACRO defines */
-#define CAP_REG_OFFSET 0x0
-#define OP_REG_OFFSET 0x28
-
-#define DMA_ADDR_INVALID (~(dma_addr_t)0)
-
-#define DQH_ALIGNMENT 2048
-#define DTD_ALIGNMENT 64
-#define DMA_BOUNDARY 4096
-
-#define EP0_MAX_PKT_SIZE 64
-#define EP_DIR_IN 1
-#define EP_DIR_OUT 0
-
-#define FLUSH_TIMEOUT 1000
-#define RESET_TIMEOUT 1000
-#define SETUPSTAT_TIMEOUT 100
-#define PRIME_TIMEOUT 100
-
-
-/* device memory space registers */
-
-/* Capability Registers, BAR0 + CAP_REG_OFFSET */
-struct langwell_cap_regs {
- /* offset: 0x0 */
- u8 caplength; /* offset of Operational Register */
- u8 _reserved3;
- u16 hciversion; /* H: BCD encoding of host version */
- u32 hcsparams; /* H: host port steering logic capability */
- u32 hccparams; /* H: host multiple mode control capability */
-#define HCC_LEN BIT(17) /* Link power management (LPM) capability */
- u8 _reserved4[0x20-0xc];
- /* offset: 0x20 */
- u16 dciversion; /* BCD encoding of device version */
- u8 _reserved5[0x24-0x22];
- u32 dccparams; /* overall device controller capability */
-#define HOSTCAP BIT(8) /* host capable */
-#define DEVCAP BIT(7) /* device capable */
-#define DEN(d) \
- (((d)>>0)&0x1f) /* bits 4:0, device endpoint number */
-} __attribute__ ((packed));
-
-
-/* Operational Registers, BAR0 + OP_REG_OFFSET */
-struct langwell_op_regs {
- /* offset: 0x28 */
- u32 extsts;
-#define EXTS_TI1 BIT(4) /* general purpose timer interrupt 1 */
-#define EXTS_TI1TI0 BIT(3) /* general purpose timer interrupt 0 */
-#define EXTS_TI1UPI BIT(2) /* USB host periodic interrupt */
-#define EXTS_TI1UAI BIT(1) /* USB host asynchronous interrupt */
-#define EXTS_TI1NAKI BIT(0) /* NAK interrupt */
- u32 extintr;
-#define EXTI_TIE1 BIT(4) /* general purpose timer interrupt enable 1 */
-#define EXTI_TIE0 BIT(3) /* general purpose timer interrupt enable 0 */
-#define EXTI_UPIE BIT(2) /* USB host periodic interrupt enable */
-#define EXTI_UAIE BIT(1) /* USB host asynchronous interrupt enable */
-#define EXTI_NAKE BIT(0) /* NAK interrupt enable */
- /* offset: 0x30 */
- u32 usbcmd;
-#define CMD_HIRD(u) \
- (((u)>>24)&0xf) /* bits 27:24, host init resume duration */
-#define CMD_ITC(u) \
- (((u)>>16)&0xff) /* bits 23:16, interrupt threshold control */
-#define CMD_PPE BIT(15) /* per-port change events enable */
-#define CMD_ATDTW BIT(14) /* add dTD tripwire */
-#define CMD_SUTW BIT(13) /* setup tripwire */
-#define CMD_ASPE BIT(11) /* asynchronous schedule park mode enable */
-#define CMD_FS2 BIT(10) /* frame list size */
-#define CMD_ASP1 BIT(9) /* asynchronous schedule park mode count */
-#define CMD_ASP0 BIT(8)
-#define CMD_LR BIT(7) /* light host/device controller reset */
-#define CMD_IAA BIT(6) /* interrupt on async advance doorbell */
-#define CMD_ASE BIT(5) /* asynchronous schedule enable */
-#define CMD_PSE BIT(4) /* periodic schedule enable */
-#define CMD_FS1 BIT(3)
-#define CMD_FS0 BIT(2)
-#define CMD_RST BIT(1) /* controller reset */
-#define CMD_RUNSTOP BIT(0) /* run/stop */
- u32 usbsts;
-#define STS_PPCI(u) \
- (((u)>>16)&0xffff) /* bits 31:16, port-n change detect */
-#define STS_AS BIT(15) /* asynchronous schedule status */
-#define STS_PS BIT(14) /* periodic schedule status */
-#define STS_RCL BIT(13) /* reclamation */
-#define STS_HCH BIT(12) /* HC halted */
-#define STS_ULPII BIT(10) /* ULPI interrupt */
-#define STS_SLI BIT(8) /* DC suspend */
-#define STS_SRI BIT(7) /* SOF received */
-#define STS_URI BIT(6) /* USB reset received */
-#define STS_AAI BIT(5) /* interrupt on async advance */
-#define STS_SEI BIT(4) /* system error */
-#define STS_FRI BIT(3) /* frame list rollover */
-#define STS_PCI BIT(2) /* port change detect */
-#define STS_UEI BIT(1) /* USB error interrupt */
-#define STS_UI BIT(0) /* USB interrupt */
- u32 usbintr;
-/* bits 31:16, per-port interrupt enable */
-#define INTR_PPCE(u) (((u)>>16)&0xffff)
-#define INTR_ULPIE BIT(10) /* ULPI enable */
-#define INTR_SLE BIT(8) /* DC sleep/suspend enable */
-#define INTR_SRE BIT(7) /* SOF received enable */
-#define INTR_URE BIT(6) /* USB reset enable */
-#define INTR_AAE BIT(5) /* interrupt on async advance enable */
-#define INTR_SEE BIT(4) /* system error enable */
-#define INTR_FRE BIT(3) /* frame list rollover enable */
-#define INTR_PCE BIT(2) /* port change detect enable */
-#define INTR_UEE BIT(1) /* USB error interrupt enable */
-#define INTR_UE BIT(0) /* USB interrupt enable */
- u32 frindex; /* frame index */
-#define FRINDEX_MASK (0x3fff << 0)
- u32 ctrldssegment; /* not used */
- u32 deviceaddr;
-#define USBADR_SHIFT 25
-#define USBADR(d) \
- (((d)>>25)&0x7f) /* bits 31:25, device address */
-#define USBADR_MASK (0x7f << 25)
-#define USBADRA BIT(24) /* device address advance */
- u32 endpointlistaddr;/* endpoint list top memory address */
-/* bits 31:11, endpoint list pointer */
-#define EPBASE(d) (((d)>>11)&0x1fffff)
-#define ENDPOINTLISTADDR_MASK (0x1fffff << 11)
- u32 ttctrl; /* H: TT operatin, not used */
- /* offset: 0x50 */
- u32 burstsize; /* burst size of data movement */
-#define TXPBURST(b) \
- (((b)>>8)&0xff) /* bits 15:8, TX burst length */
-#define RXPBURST(b) \
- (((b)>>0)&0xff) /* bits 7:0, RX burst length */
- u32 txfilltuning; /* TX tuning */
- u32 txttfilltuning; /* H: TX TT tuning */
- u32 ic_usb; /* control the IC_USB FS/LS transceiver */
- /* offset: 0x60 */
- u32 ulpi_viewport; /* indirect access to ULPI PHY */
-#define ULPIWU BIT(31) /* ULPI wakeup */
-#define ULPIRUN BIT(30) /* ULPI read/write run */
-#define ULPIRW BIT(29) /* ULPI read/write control */
-#define ULPISS BIT(27) /* ULPI sync state */
-#define ULPIPORT(u) \
- (((u)>>24)&7) /* bits 26:24, ULPI port number */
-#define ULPIADDR(u) \
- (((u)>>16)&0xff) /* bits 23:16, ULPI data address */
-#define ULPIDATRD(u) \
- (((u)>>8)&0xff) /* bits 15:8, ULPI data read */
-#define ULPIDATWR(u) \
- (((u)>>0)&0xff) /* bits 7:0, ULPI date write */
- u8 _reserved6[0x70-0x64];
- /* offset: 0x70 */
- u32 configflag; /* H: not used */
- u32 portsc1; /* port status */
-#define DA(p) \
- (((p)>>25)&0x7f) /* bits 31:25, device address */
-#define PORTS_SSTS (BIT(24) | BIT(23)) /* suspend status */
-#define PORTS_WKOC BIT(22) /* wake on over-current enable */
-#define PORTS_WKDS BIT(21) /* wake on disconnect enable */
-#define PORTS_WKCN BIT(20) /* wake on connect enable */
-#define PORTS_PTC(p) (((p)>>16)&0xf) /* bits 19:16, port test control */
-#define PORTS_PIC (BIT(15) | BIT(14)) /* port indicator control */
-#define PORTS_PO BIT(13) /* port owner */
-#define PORTS_PP BIT(12) /* port power */
-#define PORTS_LS (BIT(11) | BIT(10)) /* line status */
-#define PORTS_SLP BIT(9) /* suspend using L1 */
-#define PORTS_PR BIT(8) /* port reset */
-#define PORTS_SUSP BIT(7) /* suspend */
-#define PORTS_FPR BIT(6) /* force port resume */
-#define PORTS_OCC BIT(5) /* over-current change */
-#define PORTS_OCA BIT(4) /* over-current active */
-#define PORTS_PEC BIT(3) /* port enable/disable change */
-#define PORTS_PE BIT(2) /* port enable/disable */
-#define PORTS_CSC BIT(1) /* connect status change */
-#define PORTS_CCS BIT(0) /* current connect status */
- u8 _reserved7[0xb4-0x78];
- /* offset: 0xb4 */
- u32 devlc; /* control LPM and each USB port behavior */
-/* bits 31:29, parallel transceiver select */
-#define LPM_PTS(d) (((d)>>29)&7)
-#define LPM_STS BIT(28) /* serial transceiver select */
-#define LPM_PTW BIT(27) /* parallel transceiver width */
-#define LPM_PSPD(d) (((d)>>25)&3) /* bits 26:25, port speed */
-#define LPM_PSPD_MASK (BIT(26) | BIT(25))
-#define LPM_SPEED_FULL 0
-#define LPM_SPEED_LOW 1
-#define LPM_SPEED_HIGH 2
-#define LPM_SRT BIT(24) /* shorten reset time */
-#define LPM_PFSC BIT(23) /* port force full speed connect */
-#define LPM_PHCD BIT(22) /* PHY low power suspend clock disable */
-#define LPM_STL BIT(16) /* STALL reply to LPM token */
-#define LPM_BA(d) \
- (((d)>>1)&0x7ff) /* bits 11:1, BmAttributes */
-#define LPM_NYT_ACK BIT(0) /* NYET/ACK reply to LPM token */
- u8 _reserved8[0xf4-0xb8];
- /* offset: 0xf4 */
- u32 otgsc; /* On-The-Go status and control */
-#define OTGSC_DPIE BIT(30) /* data pulse interrupt enable */
-#define OTGSC_MSE BIT(29) /* 1 ms timer interrupt enable */
-#define OTGSC_BSEIE BIT(28) /* B session end interrupt enable */
-#define OTGSC_BSVIE BIT(27) /* B session valid interrupt enable */
-#define OTGSC_ASVIE BIT(26) /* A session valid interrupt enable */
-#define OTGSC_AVVIE BIT(25) /* A VBUS valid interrupt enable */
-#define OTGSC_IDIE BIT(24) /* USB ID interrupt enable */
-#define OTGSC_DPIS BIT(22) /* data pulse interrupt status */
-#define OTGSC_MSS BIT(21) /* 1 ms timer interrupt status */
-#define OTGSC_BSEIS BIT(20) /* B session end interrupt status */
-#define OTGSC_BSVIS BIT(19) /* B session valid interrupt status */
-#define OTGSC_ASVIS BIT(18) /* A session valid interrupt status */
-#define OTGSC_AVVIS BIT(17) /* A VBUS valid interrupt status */
-#define OTGSC_IDIS BIT(16) /* USB ID interrupt status */
-#define OTGSC_DPS BIT(14) /* data bus pulsing status */
-#define OTGSC_MST BIT(13) /* 1 ms timer toggle */
-#define OTGSC_BSE BIT(12) /* B session end */
-#define OTGSC_BSV BIT(11) /* B session valid */
-#define OTGSC_ASV BIT(10) /* A session valid */
-#define OTGSC_AVV BIT(9) /* A VBUS valid */
-#define OTGSC_USBID BIT(8) /* USB ID */
-#define OTGSC_HABA BIT(7) /* hw assist B-disconnect to A-connect */
-#define OTGSC_HADP BIT(6) /* hw assist data pulse */
-#define OTGSC_IDPU BIT(5) /* ID pullup */
-#define OTGSC_DP BIT(4) /* data pulsing */
-#define OTGSC_OT BIT(3) /* OTG termination */
-#define OTGSC_HAAR BIT(2) /* hw assist auto reset */
-#define OTGSC_VC BIT(1) /* VBUS charge */
-#define OTGSC_VD BIT(0) /* VBUS discharge */
- u32 usbmode;
-#define MODE_VBPS BIT(5) /* R/W VBUS power select */
-#define MODE_SDIS BIT(4) /* R/W stream disable mode */
-#define MODE_SLOM BIT(3) /* R/W setup lockout mode */
-#define MODE_ENSE BIT(2) /* endian select */
-#define MODE_CM(u) (((u)>>0)&3) /* bits 1:0, controller mode */
-#define MODE_IDLE 0
-#define MODE_DEVICE 2
-#define MODE_HOST 3
- u8 _reserved9[0x100-0xfc];
- /* offset: 0x100 */
- u32 endptnak;
-#define EPTN(e) \
- (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK */
-#define EPRN(e) \
- (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK */
- u32 endptnaken;
-#define EPTNE(e) \
- (((e)>>16)&0xffff) /* bits 31:16, TX endpoint NAK enable */
-#define EPRNE(e) \
- (((e)>>0)&0xffff) /* bits 15:0, RX endpoint NAK enable */
- u32 endptsetupstat;
-#define SETUPSTAT_MASK (0xffff << 0) /* bits 15:0 */
-#define EP0SETUPSTAT_MASK 1
- u32 endptprime;
-/* bits 31:16, prime endpoint transmit buffer */
-#define PETB(e) (((e)>>16)&0xffff)
-/* bits 15:0, prime endpoint receive buffer */
-#define PERB(e) (((e)>>0)&0xffff)
- /* offset: 0x110 */
- u32 endptflush;
-/* bits 31:16, flush endpoint transmit buffer */
-#define FETB(e) (((e)>>16)&0xffff)
-/* bits 15:0, flush endpoint receive buffer */
-#define FERB(e) (((e)>>0)&0xffff)
- u32 endptstat;
-/* bits 31:16, endpoint transmit buffer ready */
-#define ETBR(e) (((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive buffer ready */
-#define ERBR(e) (((e)>>0)&0xffff)
- u32 endptcomplete;
-/* bits 31:16, endpoint transmit complete event */
-#define ETCE(e) (((e)>>16)&0xffff)
-/* bits 15:0, endpoint receive complete event */
-#define ERCE(e) (((e)>>0)&0xffff)
- /* offset: 0x11c */
- u32 endptctrl[16];
-#define EPCTRL_TXE BIT(23) /* TX endpoint enable */
-#define EPCTRL_TXR BIT(22) /* TX data toggle reset */
-#define EPCTRL_TXI BIT(21) /* TX data toggle inhibit */
-#define EPCTRL_TXT(e) (((e)>>18)&3) /* bits 19:18, TX endpoint type */
-#define EPCTRL_TXT_SHIFT 18
-#define EPCTRL_TXD BIT(17) /* TX endpoint data source */
-#define EPCTRL_TXS BIT(16) /* TX endpoint STALL */
-#define EPCTRL_RXE BIT(7) /* RX endpoint enable */
-#define EPCTRL_RXR BIT(6) /* RX data toggle reset */
-#define EPCTRL_RXI BIT(5) /* RX data toggle inhibit */
-#define EPCTRL_RXT(e) (((e)>>2)&3) /* bits 3:2, RX endpoint type */
-#define EPCTRL_RXT_SHIFT 2 /* bits 19:18, TX endpoint type */
-#define EPCTRL_RXD BIT(1) /* RX endpoint data sink */
-#define EPCTRL_RXS BIT(0) /* RX endpoint STALL */
-} __attribute__ ((packed));
-
-#endif /* __LANGWELL_UDC_H */
-
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 474283888233..86c0b451745d 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -1,7 +1,7 @@
/*
* USB Serial Converter stuff
*
- * Copyright (C) 1999 - 2005
+ * Copyright (C) 1999 - 2012
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
@@ -249,6 +249,7 @@ struct usb_serial_driver {
int (*suspend)(struct usb_serial *serial, pm_message_t message);
int (*resume)(struct usb_serial *serial);
+ int (*reset_resume)(struct usb_serial *serial);
/* serial function calls */
/* Called by console and by the tty layer */
@@ -292,16 +293,11 @@ struct usb_serial_driver {
#define to_usb_serial_driver(d) \
container_of(d, struct usb_serial_driver, driver)
-extern int usb_serial_register_drivers(struct usb_driver *udriver,
- struct usb_serial_driver * const serial_drivers[]);
-extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
- struct usb_serial_driver * const serial_drivers[]);
+extern int usb_serial_register_drivers(struct usb_serial_driver *const serial_drivers[],
+ const char *name, const struct usb_device_id *id_table);
+extern void usb_serial_deregister_drivers(struct usb_serial_driver *const serial_drivers[]);
extern void usb_serial_port_softint(struct usb_serial_port *port);
-extern int usb_serial_probe(struct usb_interface *iface,
- const struct usb_device_id *id);
-extern void usb_serial_disconnect(struct usb_interface *iface);
-
extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
extern int usb_serial_resume(struct usb_interface *intf);
@@ -400,8 +396,8 @@ do { \
/*
* module_usb_serial_driver() - Helper macro for registering a USB Serial driver
- * @__usb_driver: usb_driver struct to register
* @__serial_drivers: list of usb_serial drivers to register
+ * @__ids: all device ids that @__serial_drivers bind to
*
* Helper macro for USB serial drivers which do not do anything special
* in module init/exit. This eliminates a lot of boilerplate. Each
@@ -409,9 +405,21 @@ do { \
* module_init() and module_exit()
*
*/
-#define module_usb_serial_driver(__usb_driver, __serial_drivers) \
- module_driver(__usb_driver, usb_serial_register_drivers, \
- usb_serial_deregister_drivers, __serial_drivers)
+#define usb_serial_module_driver(__name, __serial_drivers, __ids) \
+static int __init usb_serial_module_init(void) \
+{ \
+ return usb_serial_register_drivers(__serial_drivers, \
+ __name, __ids); \
+} \
+module_init(usb_serial_module_init); \
+static void __exit usb_serial_module_exit(void) \
+{ \
+ usb_serial_deregister_drivers(__serial_drivers); \
+} \
+module_exit(usb_serial_module_exit);
+
+#define module_usb_serial_driver(__serial_drivers, __ids) \
+ usb_serial_module_driver(KBUILD_MODNAME, __serial_drivers, __ids)
#endif /* __LINUX_USB_SERIAL_H */
diff --git a/include/linux/uuid.h b/include/linux/uuid.h
index 5b7efbfcee4e..f86c37bfd4a0 100644
--- a/include/linux/uuid.h
+++ b/include/linux/uuid.h
@@ -54,6 +54,8 @@ typedef struct {
UUID_BE(0x00000000, 0x0000, 0x0000, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00)
+#ifdef __KERNEL__
+
static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2)
{
return memcmp(&u1, &u2, sizeof(uuid_le));
@@ -67,4 +69,6 @@ static inline int uuid_be_cmp(const uuid_be u1, const uuid_be u2)
extern void uuid_le_gen(uuid_le *u);
extern void uuid_be_gen(uuid_be *u);
+#endif /* __KERNEL__ */
+
#endif
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 7323a3390206..fc457f452f64 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -74,15 +74,6 @@
* @set_status: write the status byte
* vdev: the virtio_device
* status: the new status byte
- * @request_vqs: request the specified number of virtqueues
- * vdev: the virtio_device
- * max_vqs: the max number of virtqueues we want
- * If supplied, must call before any virtqueues are instantiated.
- * To modify the max number of virtqueues after request_vqs has been
- * called, call free_vqs and then request_vqs with a new value.
- * @free_vqs: cleanup resources allocated by request_vqs
- * vdev: the virtio_device
- * If supplied, must call after all virtqueues have been deleted.
* @reset: reset the device
* vdev: the virtio device
* After this, status and feature negotiation must be done again
@@ -156,7 +147,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev,
* @vdev: the virtio device
* @fbit: the feature bit
* @offset: the type to search for.
- * @val: a pointer to the value to fill in.
+ * @v: a pointer to the value to fill in.
*
* The return value is -ENOENT if the feature doesn't exist. Otherwise
* the config value is copied into whatever is pointed to by v. */
diff --git a/include/linux/vme.h b/include/linux/vme.h
new file mode 100644
index 000000000000..c9d65bf14cec
--- /dev/null
+++ b/include/linux/vme.h
@@ -0,0 +1,174 @@
+#ifndef _VME_H_
+#define _VME_H_
+
+/* Resource Type */
+enum vme_resource_type {
+ VME_MASTER,
+ VME_SLAVE,
+ VME_DMA,
+ VME_LM
+};
+
+/* VME Address Spaces */
+#define VME_A16 0x1
+#define VME_A24 0x2
+#define VME_A32 0x4
+#define VME_A64 0x8
+#define VME_CRCSR 0x10
+#define VME_USER1 0x20
+#define VME_USER2 0x40
+#define VME_USER3 0x80
+#define VME_USER4 0x100
+
+#define VME_A16_MAX 0x10000ULL
+#define VME_A24_MAX 0x1000000ULL
+#define VME_A32_MAX 0x100000000ULL
+#define VME_A64_MAX 0x10000000000000000ULL
+#define VME_CRCSR_MAX 0x1000000ULL
+
+
+/* VME Cycle Types */
+#define VME_SCT 0x1
+#define VME_BLT 0x2
+#define VME_MBLT 0x4
+#define VME_2eVME 0x8
+#define VME_2eSST 0x10
+#define VME_2eSSTB 0x20
+
+#define VME_2eSST160 0x100
+#define VME_2eSST267 0x200
+#define VME_2eSST320 0x400
+
+#define VME_SUPER 0x1000
+#define VME_USER 0x2000
+#define VME_PROG 0x4000
+#define VME_DATA 0x8000
+
+/* VME Data Widths */
+#define VME_D8 0x1
+#define VME_D16 0x2
+#define VME_D32 0x4
+#define VME_D64 0x8
+
+/* Arbitration Scheduling Modes */
+#define VME_R_ROBIN_MODE 0x1
+#define VME_PRIORITY_MODE 0x2
+
+#define VME_DMA_PATTERN (1<<0)
+#define VME_DMA_PCI (1<<1)
+#define VME_DMA_VME (1<<2)
+
+#define VME_DMA_PATTERN_BYTE (1<<0)
+#define VME_DMA_PATTERN_WORD (1<<1)
+#define VME_DMA_PATTERN_INCREMENT (1<<2)
+
+#define VME_DMA_VME_TO_MEM (1<<0)
+#define VME_DMA_MEM_TO_VME (1<<1)
+#define VME_DMA_VME_TO_VME (1<<2)
+#define VME_DMA_MEM_TO_MEM (1<<3)
+#define VME_DMA_PATTERN_TO_VME (1<<4)
+#define VME_DMA_PATTERN_TO_MEM (1<<5)
+
+struct vme_dma_attr {
+ u32 type;
+ void *private;
+};
+
+struct vme_resource {
+ enum vme_resource_type type;
+ struct list_head *entry;
+};
+
+extern struct bus_type vme_bus_type;
+
+/* VME_MAX_BRIDGES comes from the type of vme_bus_numbers */
+#define VME_MAX_BRIDGES (sizeof(unsigned int)*8)
+#define VME_MAX_SLOTS 32
+
+#define VME_SLOT_CURRENT -1
+#define VME_SLOT_ALL -2
+
+/**
+ * Structure representing a VME device
+ * @num: The device number
+ * @bridge: Pointer to the bridge device this device is on
+ * @dev: Internal device structure
+ * @drv_list: List of devices (per driver)
+ * @bridge_list: List of devices (per bridge)
+ */
+struct vme_dev {
+ int num;
+ struct vme_bridge *bridge;
+ struct device dev;
+ struct list_head drv_list;
+ struct list_head bridge_list;
+};
+
+struct vme_driver {
+ struct list_head node;
+ const char *name;
+ int (*match)(struct vme_dev *);
+ int (*probe)(struct vme_dev *);
+ int (*remove)(struct vme_dev *);
+ void (*shutdown)(void);
+ struct device_driver driver;
+ struct list_head devices;
+};
+
+void *vme_alloc_consistent(struct vme_resource *, size_t, dma_addr_t *);
+void vme_free_consistent(struct vme_resource *, size_t, void *,
+ dma_addr_t);
+
+size_t vme_get_size(struct vme_resource *);
+
+struct vme_resource *vme_slave_request(struct vme_dev *, u32, u32);
+int vme_slave_set(struct vme_resource *, int, unsigned long long,
+ unsigned long long, dma_addr_t, u32, u32);
+int vme_slave_get(struct vme_resource *, int *, unsigned long long *,
+ unsigned long long *, dma_addr_t *, u32 *, u32 *);
+void vme_slave_free(struct vme_resource *);
+
+struct vme_resource *vme_master_request(struct vme_dev *, u32, u32, u32);
+int vme_master_set(struct vme_resource *, int, unsigned long long,
+ unsigned long long, u32, u32, u32);
+int vme_master_get(struct vme_resource *, int *, unsigned long long *,
+ unsigned long long *, u32 *, u32 *, u32 *);
+ssize_t vme_master_read(struct vme_resource *, void *, size_t, loff_t);
+ssize_t vme_master_write(struct vme_resource *, void *, size_t, loff_t);
+unsigned int vme_master_rmw(struct vme_resource *, unsigned int, unsigned int,
+ unsigned int, loff_t);
+void vme_master_free(struct vme_resource *);
+
+struct vme_resource *vme_dma_request(struct vme_dev *, u32);
+struct vme_dma_list *vme_new_dma_list(struct vme_resource *);
+struct vme_dma_attr *vme_dma_pattern_attribute(u32, u32);
+struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t);
+struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long, u32, u32, u32);
+void vme_dma_free_attribute(struct vme_dma_attr *);
+int vme_dma_list_add(struct vme_dma_list *, struct vme_dma_attr *,
+ struct vme_dma_attr *, size_t);
+int vme_dma_list_exec(struct vme_dma_list *);
+int vme_dma_list_free(struct vme_dma_list *);
+int vme_dma_free(struct vme_resource *);
+
+int vme_irq_request(struct vme_dev *, int, int,
+ void (*callback)(int, int, void *), void *);
+void vme_irq_free(struct vme_dev *, int, int);
+int vme_irq_generate(struct vme_dev *, int, int);
+
+struct vme_resource *vme_lm_request(struct vme_dev *);
+int vme_lm_count(struct vme_resource *);
+int vme_lm_set(struct vme_resource *, unsigned long long, u32, u32);
+int vme_lm_get(struct vme_resource *, unsigned long long *, u32 *, u32 *);
+int vme_lm_attach(struct vme_resource *, int, void (*callback)(int));
+int vme_lm_detach(struct vme_resource *, int);
+void vme_lm_free(struct vme_resource *);
+
+int vme_slot_get(struct vme_dev *);
+
+int vme_register_driver(struct vme_driver *, unsigned int);
+void vme_unregister_driver(struct vme_driver *);
+
+
+#endif /* _VME_H_ */
+
diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h
index e33d77f15bda..50ae7d0c279e 100644
--- a/include/linux/vt_kern.h
+++ b/include/linux/vt_kern.h
@@ -70,7 +70,6 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list);
int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list);
int con_set_default_unimap(struct vc_data *vc);
void con_free_unimap(struct vc_data *vc);
-void con_protect_unimap(struct vc_data *vc, int rdonly);
int con_copy_unimap(struct vc_data *dst_vc, struct vc_data *src_vc);
#define vc_translate(vc, c) ((vc)->vc_translate[(c) | \