summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h109
1 files changed, 48 insertions, 61 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 95e39b6a02ec..bb86aa6f98dd 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -233,8 +233,10 @@ enum ieee80211_rssi_event {
* valid in station mode only while @assoc is true and if also
* requested by %IEEE80211_HW_NEED_DTIM_PERIOD (cf. also hw conf
* @ps_dtim_period)
- * @last_tsf: last beacon's/probe response's TSF timestamp (could be old
+ * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old
* as it may have been received during scanning long ago)
+ * @sync_device_ts: the device timestamp corresponding to the sync_tsf,
+ * the driver/device can use this to calculate synchronisation
* @beacon_int: beacon interval
* @assoc_capability: capabilities taken from assoc resp
* @basic_rates: bitmap of basic rates, each bit stands for an
@@ -281,7 +283,8 @@ struct ieee80211_bss_conf {
u8 dtim_period;
u16 beacon_int;
u16 assoc_capability;
- u64 last_tsf;
+ u64 sync_tsf;
+ u32 sync_device_ts;
u32 basic_rates;
int mcast_rate[IEEE80211_NUM_BANDS];
u16 ht_operation_mode;
@@ -475,7 +478,7 @@ enum mac80211_rate_control_flags {
#define IEEE80211_TX_INFO_RATE_DRIVER_DATA_SIZE 24
/* maximum number of rate stages */
-#define IEEE80211_TX_MAX_RATES 5
+#define IEEE80211_TX_MAX_RATES 4
/**
* struct ieee80211_tx_rate - rate selection/status
@@ -563,11 +566,11 @@ struct ieee80211_tx_info {
} control;
struct {
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
- u8 ampdu_ack_len;
int ack_signal;
+ u8 ampdu_ack_len;
u8 ampdu_len;
u8 antenna;
- /* 14 bytes free */
+ /* 21 bytes free */
} status;
struct {
struct ieee80211_tx_rate driver_rates[
@@ -634,7 +637,7 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
info->status.rates[i].count = 0;
BUILD_BUG_ON(
- offsetof(struct ieee80211_tx_info, status.ampdu_ack_len) != 23);
+ offsetof(struct ieee80211_tx_info, status.ack_signal) != 20);
memset(&info->status.ampdu_ack_len, 0,
sizeof(struct ieee80211_tx_info) -
offsetof(struct ieee80211_tx_info, status.ampdu_ack_len));
@@ -696,6 +699,8 @@ enum mac80211_rx_flags {
*
* @mactime: value in microseconds of the 64-bit Time Synchronization Function
* (TSF) timer when the first data symbol (MPDU) arrived at the hardware.
+ * @device_timestamp: arbitrary timestamp for the device, mac80211 doesn't use
+ * it but can store it and pass it back to the driver for synchronisation
* @band: the active band when this frame was received
* @freq: frequency the radio was tuned to when receiving this frame, in MHz
* @signal: signal strength when receiving this frame, either in dBm, in dB or
@@ -709,13 +714,14 @@ enum mac80211_rx_flags {
*/
struct ieee80211_rx_status {
u64 mactime;
- enum ieee80211_band band;
- int freq;
- int signal;
- int antenna;
- int rate_idx;
- int flag;
- unsigned int rx_flags;
+ u32 device_timestamp;
+ u16 flag;
+ u16 freq;
+ u8 rate_idx;
+ u8 rx_flags;
+ u8 band;
+ u8 antenna;
+ s8 signal;
};
/**
@@ -1297,6 +1303,10 @@ enum ieee80211_hw_flags {
* reports, by default it is set to _MCS, _GI and _BW but doesn't
* include _FMT. Use %IEEE80211_RADIOTAP_MCS_HAVE_* values, only
* adding _BW is supported today.
+ *
+ * @netdev_features: netdev features to be set in each netdev created
+ * from this HW. Note only HW checksum features are currently
+ * compatible with mac80211. Other feature bits will be rejected.
*/
struct ieee80211_hw {
struct ieee80211_conf conf;
@@ -1319,6 +1329,7 @@ struct ieee80211_hw {
u8 max_tx_aggregation_subframes;
u8 offchannel_tx_hw_queue;
u8 radiotap_mcs_details;
+ netdev_features_t netdev_features;
};
/**
@@ -1891,19 +1902,6 @@ enum ieee80211_rate_control_changed {
* The low-level driver should send the frame out based on
* configuration in the TX control data. This handler should,
* preferably, never fail and stop queues appropriately.
- * This must be implemented if @tx_frags is not.
- * Must be atomic.
- *
- * @tx_frags: Called to transmit multiple fragments of a single MSDU.
- * This handler must consume all fragments, sending out some of
- * them only is useless and it can't ask for some of them to be
- * queued again. If the frame is not fragmented the queue has a
- * single SKB only. To avoid issues with the networking stack
- * when TX status is reported the frames should be removed from
- * the skb queue.
- * If this is used, the tx_info @vif and @sta pointers will be
- * invalid -- you must not use them in that case.
- * This must be implemented if @tx isn't.
* Must be atomic.
*
* @start: Called before the first netdevice attached to the hardware
@@ -2183,7 +2181,10 @@ enum ieee80211_rate_control_changed {
* offload. Frames to transmit on the off-channel channel are transmitted
* normally except for the %IEEE80211_TX_CTL_TX_OFFCHAN flag. When the
* duration (which will always be non-zero) expires, the driver must call
- * ieee80211_remain_on_channel_expired(). This callback may sleep.
+ * ieee80211_remain_on_channel_expired().
+ * Note that this callback may be called while the device is in IDLE and
+ * must be accepted in this case.
+ * This callback may sleep.
* @cancel_remain_on_channel: Requests that an ongoing off-channel period is
* aborted before it expires. This callback may sleep.
*
@@ -2246,11 +2247,24 @@ enum ieee80211_rate_control_changed {
* @get_et_strings: Ethtool API to get a set of strings to describe stats
* and perhaps other supported types of ethtool data-sets.
*
+ * @get_rssi: Get current signal strength in dBm, the function is optional
+ * and can sleep.
+ *
+ * @mgd_prepare_tx: Prepare for transmitting a management frame for association
+ * before associated. In multi-channel scenarios, a virtual interface is
+ * bound to a channel before it is associated, but as it isn't associated
+ * yet it need not necessarily be given airtime, in particular since any
+ * transmission to a P2P GO needs to be synchronized against the GO's
+ * powersave state. mac80211 will call this function before transmitting a
+ * management frame prior to having successfully associated to allow the
+ * driver to give it channel time for the transmission, to get a response
+ * and to be able to synchronize with the GO.
+ * The callback will be called before each transmission and upon return
+ * mac80211 will transmit the frame right away.
+ * The callback is optional and can (should!) sleep.
*/
struct ieee80211_ops {
void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb);
- void (*tx_frags)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
- struct ieee80211_sta *sta, struct sk_buff_head *skbs);
int (*start)(struct ieee80211_hw *hw);
void (*stop)(struct ieee80211_hw *hw);
#ifdef CONFIG_PM
@@ -2385,6 +2399,11 @@ struct ieee80211_ops {
void (*get_et_strings)(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
u32 sset, u8 *data);
+ int (*get_rssi)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta, s8 *rssi_dbm);
+
+ void (*mgd_prepare_tx)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif);
};
/**
@@ -3557,16 +3576,6 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
gfp_t gfp);
/**
- * ieee80211_get_operstate - get the operstate of the vif
- *
- * @vif: &struct ieee80211_vif pointer from the add_interface callback.
- *
- * The driver might need to know the operstate of the net_device
- * (specifically, whether the link is IF_OPER_UP after resume)
- */
-unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif);
-
-/**
* ieee80211_chswitch_done - Complete channel switch process
* @vif: &struct ieee80211_vif pointer from the add_interface callback.
* @success: make the channel switch successful or not
@@ -3589,22 +3598,6 @@ void ieee80211_request_smps(struct ieee80211_vif *vif,
enum ieee80211_smps_mode smps_mode);
/**
- * ieee80211_key_removed - disable hw acceleration for key
- * @key_conf: The key hw acceleration should be disabled for
- *
- * This allows drivers to indicate that the given key has been
- * removed from hardware acceleration, due to a new key that
- * was added. Don't use this if the key can continue to be used
- * for TX, if the key restriction is on RX only it is permitted
- * to keep the key for TX only and not call this function.
- *
- * Due to locking constraints, it may only be called during
- * @set_key. This function must be allowed to sleep, and the
- * key it tries to disable may still be used until it returns.
- */
-void ieee80211_key_removed(struct ieee80211_key_conf *key_conf);
-
-/**
* ieee80211_ready_on_channel - notification of remain-on-channel start
* @hw: pointer as obtained from ieee80211_alloc_hw()
*/
@@ -3829,12 +3822,6 @@ void ieee80211_enable_rssi_reports(struct ieee80211_vif *vif,
void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif);
-int ieee80211_add_srates_ie(struct ieee80211_vif *vif,
- struct sk_buff *skb, bool need_basic);
-
-int ieee80211_add_ext_srates_ie(struct ieee80211_vif *vif,
- struct sk_buff *skb, bool need_basic);
-
/**
* ieee80211_ave_rssi - report the average rssi for the specified interface
*