summaryrefslogtreecommitdiff
path: root/include/net/mac80211.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/net/mac80211.h')
-rw-r--r--include/net/mac80211.h49
1 files changed, 39 insertions, 10 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bfc569498bfa..82045fca388b 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -5,6 +5,7 @@
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
+ * Copyright (C) 2015 Intel Deutschland GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -481,7 +482,9 @@ struct ieee80211_event {
* Note that with TDLS this can be the case (channel is HT, protection must
* be used from this field) even when the BSS association isn't using HT.
* @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
- * implies disabled
+ * implies disabled. As with the cfg80211 callback, a change here should
+ * cause an event to be sent indicating where the current value is in
+ * relation to the newly configured threshold.
* @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis
* @arp_addr_list: List of IPv4 addresses for hardware ARP filtering. The
* may filter ARP queries targeted for other addresses than listed here.
@@ -1240,11 +1243,6 @@ enum ieee80211_smps_mode {
* @flags: configuration flags defined above
*
* @listen_interval: listen interval in units of beacon interval
- * @max_sleep_period: the maximum number of beacon intervals to sleep for
- * before checking the beacon for a TIM bit (managed mode only); this
- * value will be only achievable between DTIM frames, the hardware
- * needs to check for the multicast traffic bit in DTIM beacons.
- * This variable is valid only when the CONF_PS flag is set.
* @ps_dtim_period: The DTIM period of the AP we're connected to, for use
* in power saving. Power saving will not be enabled until a beacon
* has been received and the DTIM period is known.
@@ -1274,7 +1272,6 @@ enum ieee80211_smps_mode {
struct ieee80211_conf {
u32 flags;
int power_level, dynamic_ps_timeout;
- int max_sleep_period;
u16 listen_interval;
u8 ps_dtim_period;
@@ -1360,6 +1357,8 @@ enum ieee80211_vif_flags {
* @debugfs_dir: debugfs dentry, can be used by drivers to create own per
* interface debug files. Note that it will be NULL for the virtual
* monitor interface (if that is requested.)
+ * @probe_req_reg: probe requests should be reported to mac80211 for this
+ * interface.
* @drv_priv: data area for driver use, will always be aligned to
* sizeof(void *).
* @txq: the multicast data TX queue (if driver uses the TXQ abstraction)
@@ -1384,6 +1383,8 @@ struct ieee80211_vif {
struct dentry *debugfs_dir;
#endif
+ unsigned int probe_req_reg;
+
/* must be last */
u8 drv_priv[0] __aligned(sizeof(void *));
};
@@ -1494,10 +1495,8 @@ enum ieee80211_key_flags {
* - Temporal Authenticator Rx MIC Key (64 bits)
* @icv_len: The ICV length for this key type
* @iv_len: The IV length for this key type
- * @drv_priv: pointer for driver use
*/
struct ieee80211_key_conf {
- void *drv_priv;
atomic64_t tx_pn;
u32 cipher;
u8 icv_len;
@@ -1680,6 +1679,7 @@ struct ieee80211_sta_rates {
* @tdls: indicates whether the STA is a TDLS peer
* @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
* valid if the STA is a TDLS peer in the first place.
+ * @mfp: indicates whether the STA uses management frame protection or not.
* @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
*/
struct ieee80211_sta {
@@ -1697,6 +1697,7 @@ struct ieee80211_sta {
struct ieee80211_sta_rates __rcu *rates;
bool tdls;
bool tdls_initiator;
+ bool mfp;
struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
@@ -1894,6 +1895,12 @@ struct ieee80211_txq {
* @IEEE80211_HW_TDLS_WIDER_BW: The device/driver supports wider bandwidth
* than then BSS bandwidth for a TDLS link on the base channel.
*
+ * @IEEE80211_HW_SUPPORTS_AMSDU_IN_AMPDU: The driver supports receiving A-MSDUs
+ * within A-MPDU.
+ *
+ * @IEEE80211_HW_BEACON_TX_STATUS: The device/driver provides TX status
+ * for sent beacons.
+ *
* @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
*/
enum ieee80211_hw_flags {
@@ -1927,6 +1934,8 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_CLONED_SKBS,
IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS,
IEEE80211_HW_TDLS_WIDER_BW,
+ IEEE80211_HW_SUPPORTS_AMSDU_IN_AMPDU,
+ IEEE80211_HW_BEACON_TX_STATUS,
/* keep last, obviously */
NUM_IEEE80211_HW_FLAGS
@@ -2827,6 +2836,13 @@ enum ieee80211_reconfig_type {
* See the section "Frame filtering" for more information.
* This callback must be implemented and can sleep.
*
+ * @config_iface_filter: Configure the interface's RX filter.
+ * This callback is optional and is used to configure which frames
+ * should be passed to mac80211. The filter_flags is the combination
+ * of FIF_* flags. The changed_flags is a bit mask that indicates
+ * which flags are changed.
+ * This callback can sleep.
+ *
* @set_tim: Set TIM bit. mac80211 calls this function when a TIM bit
* must be set or cleared for a given STA. Must be atomic.
*
@@ -3016,6 +3032,9 @@ enum ieee80211_reconfig_type {
* buffer size of 8. Correct ways to retransmit #1 would be:
* - TX: 1 or 18 or 81
* Even "189" would be wrong since 1 could be lost again.
+ * The @amsdu parameter is valid when the action is set to
+ * %IEEE80211_AMPDU_TX_OPERATIONAL and indicates the peer's ability
+ * to receive A-MSDU within A-MPDU.
*
* Returns a negative error code on failure.
* The callback can sleep.
@@ -3153,18 +3172,24 @@ enum ieee80211_reconfig_type {
* The callback is optional and can sleep.
*
* @add_chanctx: Notifies device driver about new channel context creation.
+ * This callback may sleep.
* @remove_chanctx: Notifies device driver about channel context destruction.
+ * This callback may sleep.
* @change_chanctx: Notifies device driver about channel context changes that
* may happen when combining different virtual interfaces on the same
* channel context with different settings
+ * This callback may sleep.
* @assign_vif_chanctx: Notifies device driver about channel context being bound
* to vif. Possible use is for hw queue remapping.
+ * This callback may sleep.
* @unassign_vif_chanctx: Notifies device driver about channel context being
* unbound from vif.
+ * This callback may sleep.
* @switch_vif_chanctx: switch a number of vifs from one chanctx to
* another, as specified in the list of
* @ieee80211_vif_chanctx_switch passed to the driver, according
* to the mode defined in &ieee80211_chanctx_switch_mode.
+ * This callback may sleep.
*
* @start_ap: Start operation on the AP interface, this is called after all the
* information in bss_conf is set and beacon can be retrieved. A channel
@@ -3266,6 +3291,10 @@ struct ieee80211_ops {
unsigned int changed_flags,
unsigned int *total_flags,
u64 multicast);
+ void (*config_iface_filter)(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ unsigned int filter_flags,
+ unsigned int changed_flags);
int (*set_tim)(struct ieee80211_hw *hw, struct ieee80211_sta *sta,
bool set);
int (*set_key)(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -3349,7 +3378,7 @@ struct ieee80211_ops {
struct ieee80211_vif *vif,
enum ieee80211_ampdu_mlme_action action,
struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size);
+ u8 buf_size, bool amsdu);
int (*get_survey)(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void (*rfkill_poll)(struct ieee80211_hw *hw);