summaryrefslogtreecommitdiff
path: root/include/uapi
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/linux/bpf.h655
-rw-r--r--include/uapi/linux/can/isotp.h165
-rw-r--r--include/uapi/linux/can/raw.h3
-rw-r--r--include/uapi/linux/devlink.h69
-rw-r--r--include/uapi/linux/ethtool.h2
-rw-r--r--include/uapi/linux/ethtool_netlink.h18
-rw-r--r--include/uapi/linux/genetlink.h11
-rw-r--r--include/uapi/linux/gtp.h2
-rw-r--r--include/uapi/linux/if_bridge.h38
-rw-r--r--include/uapi/linux/if_link.h235
-rw-r--r--include/uapi/linux/if_pppol2tp.h2
-rw-r--r--include/uapi/linux/inet_diag.h18
-rw-r--r--include/uapi/linux/l2tp.h7
-rw-r--r--include/uapi/linux/mroute.h5
-rw-r--r--include/uapi/linux/netfilter.h3
-rw-r--r--include/uapi/linux/netfilter/nf_tables.h10
-rw-r--r--include/uapi/linux/netfilter/nfnetlink_conntrack.h3
-rw-r--r--include/uapi/linux/netlink.h4
-rw-r--r--include/uapi/linux/nl80211.h196
-rw-r--r--include/uapi/linux/tc_act/tc_mpls.h1
-rw-r--r--include/uapi/linux/tc_act/tc_vlan.h4
-rw-r--r--include/uapi/linux/tipc.h2
-rw-r--r--include/uapi/linux/tipc_netlink.h2
23 files changed, 1358 insertions, 97 deletions
diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h
index b6238b2209b7..bf5a99d803e4 100644
--- a/include/uapi/linux/bpf.h
+++ b/include/uapi/linux/bpf.h
@@ -124,6 +124,7 @@ enum bpf_cmd {
BPF_ENABLE_STATS,
BPF_ITER_CREATE,
BPF_LINK_DETACH,
+ BPF_PROG_BIND_MAP,
};
enum bpf_map_type {
@@ -155,6 +156,7 @@ enum bpf_map_type {
BPF_MAP_TYPE_DEVMAP_HASH,
BPF_MAP_TYPE_STRUCT_OPS,
BPF_MAP_TYPE_RINGBUF,
+ BPF_MAP_TYPE_INODE_STORAGE,
};
/* Note that tracing related programs such as
@@ -345,19 +347,45 @@ enum bpf_link_type {
/* The verifier internal test flag. Behavior is undefined */
#define BPF_F_TEST_STATE_FREQ (1U << 3)
+/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will
+ * restrict map and helper usage for such programs. Sleepable BPF programs can
+ * only be attached to hooks where kernel execution context allows sleeping.
+ * Such programs are allowed to use helpers that may sleep like
+ * bpf_copy_from_user().
+ */
+#define BPF_F_SLEEPABLE (1U << 4)
+
/* When BPF ldimm64's insn[0].src_reg != 0 then this can have
- * two extensions:
- *
- * insn[0].src_reg: BPF_PSEUDO_MAP_FD BPF_PSEUDO_MAP_VALUE
- * insn[0].imm: map fd map fd
- * insn[1].imm: 0 offset into value
- * insn[0].off: 0 0
- * insn[1].off: 0 0
- * ldimm64 rewrite: address of map address of map[0]+offset
- * verifier type: CONST_PTR_TO_MAP PTR_TO_MAP_VALUE
+ * the following extensions:
+ *
+ * insn[0].src_reg: BPF_PSEUDO_MAP_FD
+ * insn[0].imm: map fd
+ * insn[1].imm: 0
+ * insn[0].off: 0
+ * insn[1].off: 0
+ * ldimm64 rewrite: address of map
+ * verifier type: CONST_PTR_TO_MAP
*/
#define BPF_PSEUDO_MAP_FD 1
+/* insn[0].src_reg: BPF_PSEUDO_MAP_VALUE
+ * insn[0].imm: map fd
+ * insn[1].imm: offset into value
+ * insn[0].off: 0
+ * insn[1].off: 0
+ * ldimm64 rewrite: address of map[0]+offset
+ * verifier type: PTR_TO_MAP_VALUE
+ */
#define BPF_PSEUDO_MAP_VALUE 2
+/* insn[0].src_reg: BPF_PSEUDO_BTF_ID
+ * insn[0].imm: kernel btd id of VAR
+ * insn[1].imm: 0
+ * insn[0].off: 0
+ * insn[1].off: 0
+ * ldimm64 rewrite: address of the kernel variable
+ * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var
+ * is struct/union.
+ */
+#define BPF_PSEUDO_BTF_ID 3
/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative
* offset to another bpf function
@@ -404,6 +432,12 @@ enum {
/* Enable memory-mapping BPF map */
BPF_F_MMAPABLE = (1U << 10),
+
+/* Share perf_event among processes */
+ BPF_F_PRESERVE_ELEMS = (1U << 11),
+
+/* Create a map that is suitable to be an inner map with dynamic max entries */
+ BPF_F_INNER_MAP = (1U << 12),
};
/* Flags for BPF_PROG_QUERY. */
@@ -414,6 +448,11 @@ enum {
*/
#define BPF_F_QUERY_EFFECTIVE (1U << 0)
+/* Flags for BPF_PROG_TEST_RUN */
+
+/* If set, run the test on the cpu specified by bpf_attr.test.cpu */
+#define BPF_F_TEST_RUN_ON_CPU (1U << 0)
+
/* type for BPF_ENABLE_STATS */
enum bpf_stats_type {
/* enabled run_time_ns and run_cnt */
@@ -556,6 +595,8 @@ union bpf_attr {
*/
__aligned_u64 ctx_in;
__aligned_u64 ctx_out;
+ __u32 flags;
+ __u32 cpu;
} test;
struct { /* anonymous struct used by BPF_*_GET_*_ID */
@@ -622,8 +663,13 @@ union bpf_attr {
};
__u32 attach_type; /* attach type */
__u32 flags; /* extra flags */
- __aligned_u64 iter_info; /* extra bpf_iter_link_info */
- __u32 iter_info_len; /* iter_info length */
+ union {
+ __u32 target_btf_id; /* btf_id of target to attach to */
+ struct {
+ __aligned_u64 iter_info; /* extra bpf_iter_link_info */
+ __u32 iter_info_len; /* iter_info length */
+ };
+ };
} link_create;
struct { /* struct used by BPF_LINK_UPDATE command */
@@ -649,6 +695,12 @@ union bpf_attr {
__u32 flags;
} iter_create;
+ struct { /* struct used by BPF_PROG_BIND_MAP command */
+ __u32 prog_fd;
+ __u32 map_fd;
+ __u32 flags; /* extra flags */
+ } prog_bind_map;
+
} __attribute__((aligned(8)));
/* The description below is an attempt at providing documentation to eBPF
@@ -1438,8 +1490,8 @@ union bpf_attr {
* Return
* The return value depends on the result of the test, and can be:
*
- * * 0, if the *skb* task belongs to the cgroup2.
- * * 1, if the *skb* task does not belong to the cgroup2.
+ * * 0, if current task belongs to the cgroup2.
+ * * 1, if current task does not belong to the cgroup2.
* * A negative error code, if an error occurred.
*
* long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags)
@@ -1649,7 +1701,7 @@ union bpf_attr {
* **TCP_CONGESTION**, **TCP_BPF_IW**,
* **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**,
* **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**,
- * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**.
+ * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**.
* * **IPPROTO_IP**, which supports *optname* **IP_TOS**.
* * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**.
* Return
@@ -2204,7 +2256,7 @@ union bpf_attr {
* Description
* This helper is used in programs implementing policies at the
* skb socket level. If the sk_buff *skb* is allowed to pass (i.e.
- * if the verdeict eBPF program returns **SK_PASS**), redirect it
+ * if the verdict eBPF program returns **SK_PASS**), redirect it
* to the socket referenced by *map* (of type
* **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and
* egress interfaces can be used for redirection. The
@@ -2496,7 +2548,7 @@ union bpf_attr {
* result is from *reuse*\ **->socks**\ [] using the hash of the
* tuple.
*
- * long bpf_sk_release(struct bpf_sock *sock)
+ * long bpf_sk_release(void *sock)
* Description
* Release the reference held by *sock*. *sock* must be a
* non-**NULL** pointer that was returned from
@@ -2676,7 +2728,7 @@ union bpf_attr {
* result is from *reuse*\ **->socks**\ [] using the hash of the
* tuple.
*
- * long bpf_tcp_check_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
+ * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
* Description
* Check whether *iph* and *th* contain a valid SYN cookie ACK for
* the listening socket in *sk*.
@@ -2807,7 +2859,7 @@ union bpf_attr {
*
* **-ERANGE** if resulting value was out of range.
*
- * void *bpf_sk_storage_get(struct bpf_map *map, struct bpf_sock *sk, void *value, u64 flags)
+ * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags)
* Description
* Get a bpf-local-storage from a *sk*.
*
@@ -2823,6 +2875,9 @@ union bpf_attr {
* "type". The bpf-local-storage "type" (i.e. the *map*) is
* searched against all bpf-local-storages residing at *sk*.
*
+ * *sk* is a kernel **struct sock** pointer for LSM program.
+ * *sk* is a **struct bpf_sock** pointer for other program types.
+ *
* An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be
* used such that a new bpf-local-storage will be
* created if one does not exist. *value* can be used
@@ -2835,13 +2890,14 @@ union bpf_attr {
* **NULL** if not found or there was an error in adding
* a new bpf-local-storage.
*
- * long bpf_sk_storage_delete(struct bpf_map *map, struct bpf_sock *sk)
+ * long bpf_sk_storage_delete(struct bpf_map *map, void *sk)
* Description
* Delete a bpf-local-storage from a *sk*.
* Return
* 0 on success.
*
* **-ENOENT** if the bpf-local-storage cannot be found.
+ * **-EINVAL** if sk is not a fullsock (e.g. a request_sock).
*
* long bpf_send_signal(u32 sig)
* Description
@@ -2858,7 +2914,7 @@ union bpf_attr {
*
* **-EAGAIN** if bpf program can try again.
*
- * s64 bpf_tcp_gen_syncookie(struct bpf_sock *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
+ * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len)
* Description
* Try to issue a SYN cookie for the packet with corresponding
* IP/TCP headers, *iph* and *th*, on the listening socket in *sk*.
@@ -3087,7 +3143,7 @@ union bpf_attr {
* Return
* The id is returned or 0 in case the id could not be retrieved.
*
- * long bpf_sk_assign(struct sk_buff *skb, struct bpf_sock *sk, u64 flags)
+ * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags)
* Description
* Helper is overloaded depending on BPF program type. This
* description applies to **BPF_PROG_TYPE_SCHED_CLS** and
@@ -3215,11 +3271,11 @@ union bpf_attr {
*
* **-EOVERFLOW** if an overflow happened: The same object will be tried again.
*
- * u64 bpf_sk_cgroup_id(struct bpf_sock *sk)
+ * u64 bpf_sk_cgroup_id(void *sk)
* Description
* Return the cgroup v2 id of the socket *sk*.
*
- * *sk* must be a non-**NULL** pointer to a full socket, e.g. one
+ * *sk* must be a non-**NULL** pointer to a socket, e.g. one
* returned from **bpf_sk_lookup_xxx**\ (),
* **bpf_sk_fullsock**\ (), etc. The format of returned id is
* same as in **bpf_skb_cgroup_id**\ ().
@@ -3229,7 +3285,7 @@ union bpf_attr {
* Return
* The id is returned or 0 in case the id could not be retrieved.
*
- * u64 bpf_sk_ancestor_cgroup_id(struct bpf_sock *sk, int ancestor_level)
+ * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level)
* Description
* Return id of cgroup v2 that is ancestor of cgroup associated
* with the *sk* at the *ancestor_level*. The root cgroup is at
@@ -3337,38 +3393,38 @@ union bpf_attr {
* Description
* Dynamically cast a *sk* pointer to a *tcp6_sock* pointer.
* Return
- * *sk* if casting is valid, or NULL otherwise.
+ * *sk* if casting is valid, or **NULL** otherwise.
*
* struct tcp_sock *bpf_skc_to_tcp_sock(void *sk)
* Description
* Dynamically cast a *sk* pointer to a *tcp_sock* pointer.
* Return
- * *sk* if casting is valid, or NULL otherwise.
+ * *sk* if casting is valid, or **NULL** otherwise.
*
* struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk)
* Description
* Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer.
* Return
- * *sk* if casting is valid, or NULL otherwise.
+ * *sk* if casting is valid, or **NULL** otherwise.
*
* struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk)
* Description
* Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer.
* Return
- * *sk* if casting is valid, or NULL otherwise.
+ * *sk* if casting is valid, or **NULL** otherwise.
*
* struct udp6_sock *bpf_skc_to_udp6_sock(void *sk)
* Description
* Dynamically cast a *sk* pointer to a *udp6_sock* pointer.
* Return
- * *sk* if casting is valid, or NULL otherwise.
+ * *sk* if casting is valid, or **NULL** otherwise.
*
* long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags)
* Description
* Return a user or a kernel stack in bpf program provided buffer.
* To achieve this, the helper needs *task*, which is a valid
- * pointer to struct task_struct. To store the stacktrace, the
- * bpf program provides *buf* with a nonnegative *size*.
+ * pointer to **struct task_struct**. To store the stacktrace, the
+ * bpf program provides *buf* with a nonnegative *size*.
*
* The last argument, *flags*, holds the number of stack frames to
* skip (from 0 to 255), masked with
@@ -3395,6 +3451,293 @@ union bpf_attr {
* A non-negative value equal to or less than *size* on success,
* or a negative error in case of failure.
*
+ * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags)
+ * Description
+ * Load header option. Support reading a particular TCP header
+ * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**).
+ *
+ * If *flags* is 0, it will search the option from the
+ * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops**
+ * has details on what skb_data contains under different
+ * *skops*\ **->op**.
+ *
+ * The first byte of the *searchby_res* specifies the
+ * kind that it wants to search.
+ *
+ * If the searching kind is an experimental kind
+ * (i.e. 253 or 254 according to RFC6994). It also
+ * needs to specify the "magic" which is either
+ * 2 bytes or 4 bytes. It then also needs to
+ * specify the size of the magic by using
+ * the 2nd byte which is "kind-length" of a TCP
+ * header option and the "kind-length" also
+ * includes the first 2 bytes "kind" and "kind-length"
+ * itself as a normal TCP header option also does.
+ *
+ * For example, to search experimental kind 254 with
+ * 2 byte magic 0xeB9F, the searchby_res should be
+ * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ].
+ *
+ * To search for the standard window scale option (3),
+ * the *searchby_res* should be [ 3, 0, 0, .... 0 ].
+ * Note, kind-length must be 0 for regular option.
+ *
+ * Searching for No-Op (0) and End-of-Option-List (1) are
+ * not supported.
+ *
+ * *len* must be at least 2 bytes which is the minimal size
+ * of a header option.
+ *
+ * Supported flags:
+ *
+ * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the
+ * saved_syn packet or the just-received syn packet.
+ *
+ * Return
+ * > 0 when found, the header option is copied to *searchby_res*.
+ * The return value is the total length copied. On failure, a
+ * negative error code is returned:
+ *
+ * **-EINVAL** if a parameter is invalid.
+ *
+ * **-ENOMSG** if the option is not found.
+ *
+ * **-ENOENT** if no syn packet is available when
+ * **BPF_LOAD_HDR_OPT_TCP_SYN** is used.
+ *
+ * **-ENOSPC** if there is not enough space. Only *len* number of
+ * bytes are copied.
+ *
+ * **-EFAULT** on failure to parse the header options in the
+ * packet.
+ *
+ * **-EPERM** if the helper cannot be used under the current
+ * *skops*\ **->op**.
+ *
+ * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags)
+ * Description
+ * Store header option. The data will be copied
+ * from buffer *from* with length *len* to the TCP header.
+ *
+ * The buffer *from* should have the whole option that
+ * includes the kind, kind-length, and the actual
+ * option data. The *len* must be at least kind-length
+ * long. The kind-length does not have to be 4 byte
+ * aligned. The kernel will take care of the padding
+ * and setting the 4 bytes aligned value to th->doff.
+ *
+ * This helper will check for duplicated option
+ * by searching the same option in the outgoing skb.
+ *
+ * This helper can only be called during
+ * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
+ *
+ * Return
+ * 0 on success, or negative error in case of failure:
+ *
+ * **-EINVAL** If param is invalid.
+ *
+ * **-ENOSPC** if there is not enough space in the header.
+ * Nothing has been written
+ *
+ * **-EEXIST** if the option already exists.
+ *
+ * **-EFAULT** on failrue to parse the existing header options.
+ *
+ * **-EPERM** if the helper cannot be used under the current
+ * *skops*\ **->op**.
+ *
+ * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags)
+ * Description
+ * Reserve *len* bytes for the bpf header option. The
+ * space will be used by **bpf_store_hdr_opt**\ () later in
+ * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**.
+ *
+ * If **bpf_reserve_hdr_opt**\ () is called multiple times,
+ * the total number of bytes will be reserved.
+ *
+ * This helper can only be called during
+ * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**.
+ *
+ * Return
+ * 0 on success, or negative error in case of failure:
+ *
+ * **-EINVAL** if a parameter is invalid.
+ *
+ * **-ENOSPC** if there is not enough space in the header.
+ *
+ * **-EPERM** if the helper cannot be used under the current
+ * *skops*\ **->op**.
+ *
+ * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags)
+ * Description
+ * Get a bpf_local_storage from an *inode*.
+ *
+ * Logically, it could be thought of as getting the value from
+ * a *map* with *inode* as the **key**. From this
+ * perspective, the usage is not much different from
+ * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this
+ * helper enforces the key must be an inode and the map must also
+ * be a **BPF_MAP_TYPE_INODE_STORAGE**.
+ *
+ * Underneath, the value is stored locally at *inode* instead of
+ * the *map*. The *map* is used as the bpf-local-storage
+ * "type". The bpf-local-storage "type" (i.e. the *map*) is
+ * searched against all bpf_local_storage residing at *inode*.
+ *
+ * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be
+ * used such that a new bpf_local_storage will be
+ * created if one does not exist. *value* can be used
+ * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify
+ * the initial value of a bpf_local_storage. If *value* is
+ * **NULL**, the new bpf_local_storage will be zero initialized.
+ * Return
+ * A bpf_local_storage pointer is returned on success.
+ *
+ * **NULL** if not found or there was an error in adding
+ * a new bpf_local_storage.
+ *
+ * int bpf_inode_storage_delete(struct bpf_map *map, void *inode)
+ * Description
+ * Delete a bpf_local_storage from an *inode*.
+ * Return
+ * 0 on success.
+ *
+ * **-ENOENT** if the bpf_local_storage cannot be found.
+ *
+ * long bpf_d_path(struct path *path, char *buf, u32 sz)
+ * Description
+ * Return full path for given **struct path** object, which
+ * needs to be the kernel BTF *path* object. The path is
+ * returned in the provided buffer *buf* of size *sz* and
+ * is zero terminated.
+ *
+ * Return
+ * On success, the strictly positive length of the string,
+ * including the trailing NUL character. On error, a negative
+ * value.
+ *
+ * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr)
+ * Description
+ * Read *size* bytes from user space address *user_ptr* and store
+ * the data in *dst*. This is a wrapper of **copy_from_user**\ ().
+ * Return
+ * 0 on success, or a negative error in case of failure.
+ *
+ * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags)
+ * Description
+ * Use BTF to store a string representation of *ptr*->ptr in *str*,
+ * using *ptr*->type_id. This value should specify the type
+ * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1)
+ * can be used to look up vmlinux BTF type ids. Traversing the
+ * data structure using BTF, the type information and values are
+ * stored in the first *str_size* - 1 bytes of *str*. Safe copy of
+ * the pointer data is carried out to avoid kernel crashes during
+ * operation. Smaller types can use string space on the stack;
+ * larger programs can use map data to store the string
+ * representation.
+ *
+ * The string can be subsequently shared with userspace via
+ * bpf_perf_event_output() or ring buffer interfaces.
+ * bpf_trace_printk() is to be avoided as it places too small
+ * a limit on string size to be useful.
+ *
+ * *flags* is a combination of
+ *
+ * **BTF_F_COMPACT**
+ * no formatting around type information
+ * **BTF_F_NONAME**
+ * no struct/union member names/types
+ * **BTF_F_PTR_RAW**
+ * show raw (unobfuscated) pointer values;
+ * equivalent to printk specifier %px.
+ * **BTF_F_ZERO**
+ * show zero-valued struct/union members; they
+ * are not displayed by default
+ *
+ * Return
+ * The number of bytes that were written (or would have been
+ * written if output had to be truncated due to string size),
+ * or a negative error in cases of failure.
+ *
+ * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags)
+ * Description
+ * Use BTF to write to seq_write a string representation of
+ * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf().
+ * *flags* are identical to those used for bpf_snprintf_btf.
+ * Return
+ * 0 on success or a negative error in case of failure.
+ *
+ * u64 bpf_skb_cgroup_classid(struct sk_buff *skb)
+ * Description
+ * See **bpf_get_cgroup_classid**\ () for the main description.
+ * This helper differs from **bpf_get_cgroup_classid**\ () in that
+ * the cgroup v1 net_cls class is retrieved only from the *skb*'s
+ * associated socket instead of the current process.
+ * Return
+ * The id is returned or 0 in case the id could not be retrieved.
+ *
+ * long bpf_redirect_neigh(u32 ifindex, u64 flags)
+ * Description
+ * Redirect the packet to another net device of index *ifindex*
+ * and fill in L2 addresses from neighboring subsystem. This helper
+ * is somewhat similar to **bpf_redirect**\ (), except that it
+ * populates L2 addresses as well, meaning, internally, the helper
+ * performs a FIB lookup based on the skb's networking header to
+ * get the address of the next hop and then relies on the neighbor
+ * lookup for the L2 address of the nexthop.
+ *
+ * The *flags* argument is reserved and must be 0. The helper is
+ * currently only supported for tc BPF program types, and enabled
+ * for IPv4 and IPv6 protocols.
+ * Return
+ * The helper returns **TC_ACT_REDIRECT** on success or
+ * **TC_ACT_SHOT** on error.
+ *
+ * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu)
+ * Description
+ * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
+ * pointer to the percpu kernel variable on *cpu*. A ksym is an
+ * extern variable decorated with '__ksym'. For ksym, there is a
+ * global var (either static or global) defined of the same name
+ * in the kernel. The ksym is percpu if the global var is percpu.
+ * The returned pointer points to the global percpu var on *cpu*.
+ *
+ * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the
+ * kernel, except that bpf_per_cpu_ptr() may return NULL. This
+ * happens if *cpu* is larger than nr_cpu_ids. The caller of
+ * bpf_per_cpu_ptr() must check the returned value.
+ * Return
+ * A pointer pointing to the kernel percpu variable on *cpu*, or
+ * NULL, if *cpu* is invalid.
+ *
+ * void *bpf_this_cpu_ptr(const void *percpu_ptr)
+ * Description
+ * Take a pointer to a percpu ksym, *percpu_ptr*, and return a
+ * pointer to the percpu kernel variable on this cpu. See the
+ * description of 'ksym' in **bpf_per_cpu_ptr**\ ().
+ *
+ * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in
+ * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would
+ * never return NULL.
+ * Return
+ * A pointer pointing to the kernel percpu variable on this cpu.
+ *
+ * long bpf_redirect_peer(u32 ifindex, u64 flags)
+ * Description
+ * Redirect the packet to another net device of index *ifindex*.
+ * This helper is somewhat similar to **bpf_redirect**\ (), except
+ * that the redirection happens to the *ifindex*' peer device and
+ * the netns switch takes place from ingress to ingress without
+ * going through the CPU's backlog queue.
+ *
+ * The *flags* argument is reserved and must be 0. The helper is
+ * currently only supported for tc BPF program types at the ingress
+ * hook and for veth device types. The peer device must reside in a
+ * different network namespace.
+ * Return
+ * The helper returns **TC_ACT_REDIRECT** on success or
+ * **TC_ACT_SHOT** on error.
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -3539,6 +3882,20 @@ union bpf_attr {
FN(skc_to_tcp_request_sock), \
FN(skc_to_udp6_sock), \
FN(get_task_stack), \
+ FN(load_hdr_opt), \
+ FN(store_hdr_opt), \
+ FN(reserve_hdr_opt), \
+ FN(inode_storage_get), \
+ FN(inode_storage_delete), \
+ FN(d_path), \
+ FN(copy_from_user), \
+ FN(snprintf_btf), \
+ FN(seq_printf_btf), \
+ FN(skb_cgroup_classid), \
+ FN(redirect_neigh), \
+ FN(bpf_per_cpu_ptr), \
+ FN(bpf_this_cpu_ptr), \
+ FN(redirect_peer), \
/* */
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
@@ -3648,9 +4005,13 @@ enum {
BPF_F_SYSCTL_BASE_NAME = (1ULL << 0),
};
-/* BPF_FUNC_sk_storage_get flags */
+/* BPF_FUNC_<kernel_obj>_storage_get flags */
enum {
- BPF_SK_STORAGE_GET_F_CREATE = (1ULL << 0),
+ BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0),
+ /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility
+ * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead.
+ */
+ BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE,
};
/* BPF_FUNC_read_branch_records flags. */
@@ -4071,6 +4432,15 @@ struct bpf_link_info {
__u64 cgroup_id;
__u32 attach_type;
} cgroup;
+ struct {
+ __aligned_u64 target_name; /* in/out: target_name buffer ptr */
+ __u32 target_name_len; /* in/out: target_name buffer len */
+ union {
+ struct {
+ __u32 map_id;
+ } map;
+ };
+ } iter;
struct {
__u32 netns_ino;
__u32 attach_type;
@@ -4158,6 +4528,36 @@ struct bpf_sock_ops {
__u64 bytes_received;
__u64 bytes_acked;
__bpf_md_ptr(struct bpf_sock *, sk);
+ /* [skb_data, skb_data_end) covers the whole TCP header.
+ *
+ * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received
+ * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the
+ * header has not been written.
+ * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have
+ * been written so far.
+ * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes
+ * the 3WHS.
+ * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes
+ * the 3WHS.
+ *
+ * bpf_load_hdr_opt() can also be used to read a particular option.
+ */
+ __bpf_md_ptr(void *, skb_data);
+ __bpf_md_ptr(void *, skb_data_end);
+ __u32 skb_len; /* The total length of a packet.
+ * It includes the header, options,
+ * and payload.
+ */
+ __u32 skb_tcp_flags; /* tcp_flags of the header. It provides
+ * an easy way to check for tcp_flags
+ * without parsing skb_data.
+ *
+ * In particular, the skb_tcp_flags
+ * will still be available in
+ * BPF_SOCK_OPS_HDR_OPT_LEN even though
+ * the outgoing header has not
+ * been written yet.
+ */
};
/* Definitions for bpf_sock_ops_cb_flags */
@@ -4166,8 +4566,51 @@ enum {
BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1),
BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2),
BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3),
+ /* Call bpf for all received TCP headers. The bpf prog will be
+ * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB
+ *
+ * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
+ * for the header option related helpers that will be useful
+ * to the bpf programs.
+ *
+ * It could be used at the client/active side (i.e. connect() side)
+ * when the server told it that the server was in syncookie
+ * mode and required the active side to resend the bpf-written
+ * options. The active side can keep writing the bpf-options until
+ * it received a valid packet from the server side to confirm
+ * the earlier packet (and options) has been received. The later
+ * example patch is using it like this at the active side when the
+ * server is in syncookie mode.
+ *
+ * The bpf prog will usually turn this off in the common cases.
+ */
+ BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4),
+ /* Call bpf when kernel has received a header option that
+ * the kernel cannot handle. The bpf prog will be called under
+ * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB.
+ *
+ * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB
+ * for the header option related helpers that will be useful
+ * to the bpf programs.
+ */
+ BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5),
+ /* Call bpf when the kernel is writing header options for the
+ * outgoing packet. The bpf prog will first be called
+ * to reserve space in a skb under
+ * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then
+ * the bpf prog will be called to write the header option(s)
+ * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
+ *
+ * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB
+ * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option
+ * related helpers that will be useful to the bpf programs.
+ *
+ * The kernel gets its chance to reserve space and write
+ * options first before the BPF program does.
+ */
+ BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6),
/* Mask of all currently supported cb flags */
- BPF_SOCK_OPS_ALL_CB_FLAGS = 0xF,
+ BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F,
};
/* List of known BPF sock_ops operators.
@@ -4223,6 +4666,63 @@ enum {
*/
BPF_SOCK_OPS_RTT_CB, /* Called on every RTT.
*/
+ BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option.
+ * It will be called to handle
+ * the packets received at
+ * an already established
+ * connection.
+ *
+ * sock_ops->skb_data:
+ * Referring to the received skb.
+ * It covers the TCP header only.
+ *
+ * bpf_load_hdr_opt() can also
+ * be used to search for a
+ * particular option.
+ */
+ BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the
+ * header option later in
+ * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
+ * Arg1: bool want_cookie. (in
+ * writing SYNACK only)
+ *
+ * sock_ops->skb_data:
+ * Not available because no header has
+ * been written yet.
+ *
+ * sock_ops->skb_tcp_flags:
+ * The tcp_flags of the
+ * outgoing skb. (e.g. SYN, ACK, FIN).
+ *
+ * bpf_reserve_hdr_opt() should
+ * be used to reserve space.
+ */
+ BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options
+ * Arg1: bool want_cookie. (in
+ * writing SYNACK only)
+ *
+ * sock_ops->skb_data:
+ * Referring to the outgoing skb.
+ * It covers the TCP header
+ * that has already been written
+ * by the kernel and the
+ * earlier bpf-progs.
+ *
+ * sock_ops->skb_tcp_flags:
+ * The tcp_flags of the outgoing
+ * skb. (e.g. SYN, ACK, FIN).
+ *
+ * bpf_store_hdr_opt() should
+ * be used to write the
+ * option.
+ *
+ * bpf_load_hdr_opt() can also
+ * be used to search for a
+ * particular option that
+ * has already been written
+ * by the kernel or the
+ * earlier bpf-progs.
+ */
};
/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect
@@ -4250,6 +4750,63 @@ enum {
enum {
TCP_BPF_IW = 1001, /* Set TCP initial congestion window */
TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */
+ TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */
+ TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */
+ /* Copy the SYN pkt to optval
+ *
+ * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the
+ * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit
+ * to only getting from the saved_syn. It can either get the
+ * syn packet from:
+ *
+ * 1. the just-received SYN packet (only available when writing the
+ * SYNACK). It will be useful when it is not necessary to
+ * save the SYN packet for latter use. It is also the only way
+ * to get the SYN during syncookie mode because the syn
+ * packet cannot be saved during syncookie.
+ *
+ * OR
+ *
+ * 2. the earlier saved syn which was done by
+ * bpf_setsockopt(TCP_SAVE_SYN).
+ *
+ * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the
+ * SYN packet is obtained.
+ *
+ * If the bpf-prog does not need the IP[46] header, the
+ * bpf-prog can avoid parsing the IP header by using
+ * TCP_BPF_SYN. Otherwise, the bpf-prog can get both
+ * IP[46] and TCP header by using TCP_BPF_SYN_IP.
+ *
+ * >0: Total number of bytes copied
+ * -ENOSPC: Not enough space in optval. Only optlen number of
+ * bytes is copied.
+ * -ENOENT: The SYN skb is not available now and the earlier SYN pkt
+ * is not saved by setsockopt(TCP_SAVE_SYN).
+ */
+ TCP_BPF_SYN = 1005, /* Copy the TCP header */
+ TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */
+ TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */
+};
+
+enum {
+ BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0),
+};
+
+/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and
+ * BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
+ */
+enum {
+ BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the
+ * total option spaces
+ * required for an established
+ * sk in order to calculate the
+ * MSS. No skb is actually
+ * sent.
+ */
+ BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode
+ * when sending a SYN.
+ */
};
struct bpf_perf_event_value {
@@ -4447,4 +5004,34 @@ struct bpf_sk_lookup {
__u32 local_port; /* Host byte order */
};
+/*
+ * struct btf_ptr is used for typed pointer representation; the
+ * type id is used to render the pointer data as the appropriate type
+ * via the bpf_snprintf_btf() helper described above. A flags field -
+ * potentially to specify additional details about the BTF pointer
+ * (rather than its mode of display) - is included for future use.
+ * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately.
+ */
+struct btf_ptr {
+ void *ptr;
+ __u32 type_id;
+ __u32 flags; /* BTF ptr flags; unused at present. */
+};
+
+/*
+ * Flags to control bpf_snprintf_btf() behaviour.
+ * - BTF_F_COMPACT: no formatting around type information
+ * - BTF_F_NONAME: no struct/union member names/types
+ * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values;
+ * equivalent to %px.
+ * - BTF_F_ZERO: show zero-valued struct/union members; they
+ * are not displayed by default
+ */
+enum {
+ BTF_F_COMPACT = (1ULL << 0),
+ BTF_F_NONAME = (1ULL << 1),
+ BTF_F_PTR_RAW = (1ULL << 2),
+ BTF_F_ZERO = (1ULL << 3),
+};
+
#endif /* _UAPI__LINUX_BPF_H__ */
diff --git a/include/uapi/linux/can/isotp.h b/include/uapi/linux/can/isotp.h
new file mode 100644
index 000000000000..7793b26aa154
--- /dev/null
+++ b/include/uapi/linux/can/isotp.h
@@ -0,0 +1,165 @@
+/* SPDX-License-Identifier: ((GPL-2.0-only WITH Linux-syscall-note) OR BSD-3-Clause) */
+/*
+ * linux/can/isotp.h
+ *
+ * Definitions for isotp CAN sockets (ISO 15765-2:2016)
+ *
+ * Copyright (c) 2020 Volkswagen Group Electronic Research
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of Volkswagen nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * Alternatively, provided that this notice is retained in full, this
+ * software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2, in which case the provisions of the
+ * GPL apply INSTEAD OF those given above.
+ *
+ * The provided data structures and external interfaces from this code
+ * are not restricted to be used by modules with a GPL compatible license.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ */
+
+#ifndef _UAPI_CAN_ISOTP_H
+#define _UAPI_CAN_ISOTP_H
+
+#include <linux/types.h>
+#include <linux/can.h>
+
+#define SOL_CAN_ISOTP (SOL_CAN_BASE + CAN_ISOTP)
+
+/* for socket options affecting the socket (not the global system) */
+
+#define CAN_ISOTP_OPTS 1 /* pass struct can_isotp_options */
+
+#define CAN_ISOTP_RECV_FC 2 /* pass struct can_isotp_fc_options */
+
+/* sockopts to force stmin timer values for protocol regression tests */
+
+#define CAN_ISOTP_TX_STMIN 3 /* pass __u32 value in nano secs */
+ /* use this time instead of value */
+ /* provided in FC from the receiver */
+
+#define CAN_ISOTP_RX_STMIN 4 /* pass __u32 value in nano secs */
+ /* ignore received CF frames which */
+ /* timestamps differ less than val */
+
+#define CAN_ISOTP_LL_OPTS 5 /* pass struct can_isotp_ll_options */
+
+struct can_isotp_options {
+
+ __u32 flags; /* set flags for isotp behaviour. */
+ /* __u32 value : flags see below */
+
+ __u32 frame_txtime; /* frame transmission time (N_As/N_Ar) */
+ /* __u32 value : time in nano secs */
+
+ __u8 ext_address; /* set address for extended addressing */
+ /* __u8 value : extended address */
+
+ __u8 txpad_content; /* set content of padding byte (tx) */
+ /* __u8 value : content on tx path */
+
+ __u8 rxpad_content; /* set content of padding byte (rx) */
+ /* __u8 value : content on rx path */
+
+ __u8 rx_ext_address; /* set address for extended addressing */
+ /* __u8 value : extended address (rx) */
+};
+
+struct can_isotp_fc_options {
+
+ __u8 bs; /* blocksize provided in FC frame */
+ /* __u8 value : blocksize. 0 = off */
+
+ __u8 stmin; /* separation time provided in FC frame */
+ /* __u8 value : */
+ /* 0x00 - 0x7F : 0 - 127 ms */
+ /* 0x80 - 0xF0 : reserved */
+ /* 0xF1 - 0xF9 : 100 us - 900 us */
+ /* 0xFA - 0xFF : reserved */
+
+ __u8 wftmax; /* max. number of wait frame transmiss. */
+ /* __u8 value : 0 = omit FC N_PDU WT */
+};
+
+struct can_isotp_ll_options {
+
+ __u8 mtu; /* generated & accepted CAN frame type */
+ /* __u8 value : */
+ /* CAN_MTU (16) -> standard CAN 2.0 */
+ /* CANFD_MTU (72) -> CAN FD frame */
+
+ __u8 tx_dl; /* tx link layer data length in bytes */
+ /* (configured maximum payload length) */
+ /* __u8 value : 8,12,16,20,24,32,48,64 */
+ /* => rx path supports all LL_DL values */
+
+ __u8 tx_flags; /* set into struct canfd_frame.flags */
+ /* at frame creation: e.g. CANFD_BRS */
+ /* Obsolete when the BRS flag is fixed */
+ /* by the CAN netdriver configuration */
+};
+
+/* flags for isotp behaviour */
+
+#define CAN_ISOTP_LISTEN_MODE 0x001 /* listen only (do not send FC) */
+#define CAN_ISOTP_EXTEND_ADDR 0x002 /* enable extended addressing */
+#define CAN_ISOTP_TX_PADDING 0x004 /* enable CAN frame padding tx path */
+#define CAN_ISOTP_RX_PADDING 0x008 /* enable CAN frame padding rx path */
+#define CAN_ISOTP_CHK_PAD_LEN 0x010 /* check received CAN frame padding */
+#define CAN_ISOTP_CHK_PAD_DATA 0x020 /* check received CAN frame padding */
+#define CAN_ISOTP_HALF_DUPLEX 0x040 /* half duplex error state handling */
+#define CAN_ISOTP_FORCE_TXSTMIN 0x080 /* ignore stmin from received FC */
+#define CAN_ISOTP_FORCE_RXSTMIN 0x100 /* ignore CFs depending on rx stmin */
+#define CAN_ISOTP_RX_EXT_ADDR 0x200 /* different rx extended addressing */
+#define CAN_ISOTP_WAIT_TX_DONE 0x400 /* wait for tx completion */
+
+
+/* default values */
+
+#define CAN_ISOTP_DEFAULT_FLAGS 0
+#define CAN_ISOTP_DEFAULT_EXT_ADDRESS 0x00
+#define CAN_ISOTP_DEFAULT_PAD_CONTENT 0xCC /* prevent bit-stuffing */
+#define CAN_ISOTP_DEFAULT_FRAME_TXTIME 0
+#define CAN_ISOTP_DEFAULT_RECV_BS 0
+#define CAN_ISOTP_DEFAULT_RECV_STMIN 0x00
+#define CAN_ISOTP_DEFAULT_RECV_WFTMAX 0
+
+#define CAN_ISOTP_DEFAULT_LL_MTU CAN_MTU
+#define CAN_ISOTP_DEFAULT_LL_TX_DL CAN_MAX_DLEN
+#define CAN_ISOTP_DEFAULT_LL_TX_FLAGS 0
+
+/*
+ * Remark on CAN_ISOTP_DEFAULT_RECV_* values:
+ *
+ * We can strongly assume, that the Linux Kernel implementation of
+ * CAN_ISOTP is capable to run with BS=0, STmin=0 and WFTmax=0.
+ * But as we like to be able to behave as a commonly available ECU,
+ * these default settings can be changed via sockopts.
+ * For that reason the STmin value is intentionally _not_ checked for
+ * consistency and copied directly into the flow control (FC) frame.
+ */
+
+#endif /* !_UAPI_CAN_ISOTP_H */
diff --git a/include/uapi/linux/can/raw.h b/include/uapi/linux/can/raw.h
index 6a11d308eb5c..3386aa81fdf2 100644
--- a/include/uapi/linux/can/raw.h
+++ b/include/uapi/linux/can/raw.h
@@ -49,6 +49,9 @@
#include <linux/can.h>
#define SOL_CAN_RAW (SOL_CAN_BASE + CAN_RAW)
+enum {
+ SCM_CAN_RAW_ERRQUEUE = 1,
+};
/* for socket options affecting the socket (not the global system) */
diff --git a/include/uapi/linux/devlink.h b/include/uapi/linux/devlink.h
index cfef4245ea5a..0113bc4db9f5 100644
--- a/include/uapi/linux/devlink.h
+++ b/include/uapi/linux/devlink.h
@@ -13,6 +13,8 @@
#ifndef _UAPI_LINUX_DEVLINK_H_
#define _UAPI_LINUX_DEVLINK_H_
+#include <linux/const.h>
+
#define DEVLINK_GENL_NAME "devlink"
#define DEVLINK_GENL_VERSION 0x1
#define DEVLINK_GENL_MCGRP_CONFIG_NAME "config"
@@ -122,6 +124,8 @@ enum devlink_command {
DEVLINK_CMD_TRAP_POLICER_NEW,
DEVLINK_CMD_TRAP_POLICER_DEL,
+ DEVLINK_CMD_HEALTH_REPORTER_TEST,
+
/* add new commands above here */
__DEVLINK_CMD_MAX,
DEVLINK_CMD_MAX = __DEVLINK_CMD_MAX - 1
@@ -193,6 +197,9 @@ enum devlink_port_flavour {
* port that faces the PCI VF.
*/
DEVLINK_PORT_FLAVOUR_VIRTUAL, /* Any virtual port facing the user. */
+ DEVLINK_PORT_FLAVOUR_UNUSED, /* Port which exists in the switch, but
+ * is not used in any way.
+ */
};
enum devlink_param_cmode {
@@ -228,6 +235,28 @@ enum {
DEVLINK_ATTR_STATS_MAX = __DEVLINK_ATTR_STATS_MAX - 1
};
+/* Specify what sections of a flash component can be overwritten when
+ * performing an update. Overwriting of firmware binary sections is always
+ * implicitly assumed to be allowed.
+ *
+ * Each section must be documented in
+ * Documentation/networking/devlink/devlink-flash.rst
+ *
+ */
+enum {
+ DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT,
+ DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT,
+
+ __DEVLINK_FLASH_OVERWRITE_MAX_BIT,
+ DEVLINK_FLASH_OVERWRITE_MAX_BIT = __DEVLINK_FLASH_OVERWRITE_MAX_BIT - 1
+};
+
+#define DEVLINK_FLASH_OVERWRITE_SETTINGS _BITUL(DEVLINK_FLASH_OVERWRITE_SETTINGS_BIT)
+#define DEVLINK_FLASH_OVERWRITE_IDENTIFIERS _BITUL(DEVLINK_FLASH_OVERWRITE_IDENTIFIERS_BIT)
+
+#define DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS \
+ (_BITUL(__DEVLINK_FLASH_OVERWRITE_MAX_BIT) - 1)
+
/**
* enum devlink_trap_action - Packet trap action.
* @DEVLINK_TRAP_ACTION_DROP: Packet is dropped by the device and a copy is not
@@ -272,6 +301,29 @@ enum {
DEVLINK_ATTR_TRAP_METADATA_TYPE_FA_COOKIE,
};
+enum devlink_reload_action {
+ DEVLINK_RELOAD_ACTION_UNSPEC,
+ DEVLINK_RELOAD_ACTION_DRIVER_REINIT, /* Driver entities re-instantiation */
+ DEVLINK_RELOAD_ACTION_FW_ACTIVATE, /* FW activate */
+
+ /* Add new reload actions above */
+ __DEVLINK_RELOAD_ACTION_MAX,
+ DEVLINK_RELOAD_ACTION_MAX = __DEVLINK_RELOAD_ACTION_MAX - 1
+};
+
+enum devlink_reload_limit {
+ DEVLINK_RELOAD_LIMIT_UNSPEC, /* unspecified, no constraints */
+ DEVLINK_RELOAD_LIMIT_NO_RESET, /* No reset allowed, no down time allowed,
+ * no link flap and no configuration is lost.
+ */
+
+ /* Add new reload limit above */
+ __DEVLINK_RELOAD_LIMIT_MAX,
+ DEVLINK_RELOAD_LIMIT_MAX = __DEVLINK_RELOAD_LIMIT_MAX - 1
+};
+
+#define DEVLINK_RELOAD_LIMITS_VALID_MASK (BIT(__DEVLINK_RELOAD_LIMIT_MAX) - 1)
+
enum devlink_attr {
/* don't change the order or add anything between, this is ABI! */
DEVLINK_ATTR_UNSPEC,
@@ -458,6 +510,23 @@ enum devlink_attr {
DEVLINK_ATTR_PORT_LANES, /* u32 */
DEVLINK_ATTR_PORT_SPLITTABLE, /* u8 */
+ DEVLINK_ATTR_PORT_EXTERNAL, /* u8 */
+ DEVLINK_ATTR_PORT_CONTROLLER_NUMBER, /* u32 */
+
+ DEVLINK_ATTR_FLASH_UPDATE_STATUS_TIMEOUT, /* u64 */
+ DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK, /* bitfield32 */
+
+ DEVLINK_ATTR_RELOAD_ACTION, /* u8 */
+ DEVLINK_ATTR_RELOAD_ACTIONS_PERFORMED, /* bitfield32 */
+ DEVLINK_ATTR_RELOAD_LIMITS, /* bitfield32 */
+
+ DEVLINK_ATTR_DEV_STATS, /* nested */
+ DEVLINK_ATTR_RELOAD_STATS, /* nested */
+ DEVLINK_ATTR_RELOAD_STATS_ENTRY, /* nested */
+ DEVLINK_ATTR_RELOAD_STATS_LIMIT, /* u8 */
+ DEVLINK_ATTR_RELOAD_STATS_VALUE, /* u32 */
+ DEVLINK_ATTR_REMOTE_RELOAD_STATS, /* nested */
+
/* add new attributes above here, update the policy in devlink.c */
__DEVLINK_ATTR_MAX,
diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index b4f2d134e713..9ca87bc73c44 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1617,6 +1617,8 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT = 87,
ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT = 88,
ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89,
+ ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90,
+ ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 72ba36be9655..e2bf36e6964b 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -92,9 +92,12 @@ enum {
#define ETHTOOL_FLAG_COMPACT_BITSETS (1 << 0)
/* provide optional reply for SET or ACT requests */
#define ETHTOOL_FLAG_OMIT_REPLY (1 << 1)
+/* request statistics, if supported by the driver */
+#define ETHTOOL_FLAG_STATS (1 << 2)
#define ETHTOOL_FLAG_ALL (ETHTOOL_FLAG_COMPACT_BITSETS | \
- ETHTOOL_FLAG_OMIT_REPLY)
+ ETHTOOL_FLAG_OMIT_REPLY | \
+ ETHTOOL_FLAG_STATS)
enum {
ETHTOOL_A_HEADER_UNSPEC,
@@ -377,12 +380,25 @@ enum {
ETHTOOL_A_PAUSE_AUTONEG, /* u8 */
ETHTOOL_A_PAUSE_RX, /* u8 */
ETHTOOL_A_PAUSE_TX, /* u8 */
+ ETHTOOL_A_PAUSE_STATS, /* nest - _PAUSE_STAT_* */
/* add new constants above here */
__ETHTOOL_A_PAUSE_CNT,
ETHTOOL_A_PAUSE_MAX = (__ETHTOOL_A_PAUSE_CNT - 1)
};
+enum {
+ ETHTOOL_A_PAUSE_STAT_UNSPEC,
+ ETHTOOL_A_PAUSE_STAT_PAD,
+
+ ETHTOOL_A_PAUSE_STAT_TX_FRAMES,
+ ETHTOOL_A_PAUSE_STAT_RX_FRAMES,
+
+ /* add new constants above here */
+ __ETHTOOL_A_PAUSE_STAT_CNT,
+ ETHTOOL_A_PAUSE_STAT_MAX = (__ETHTOOL_A_PAUSE_STAT_CNT - 1)
+};
+
/* EEE */
enum {
diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h
index 9c0636ec2286..d83f214b4134 100644
--- a/include/uapi/linux/genetlink.h
+++ b/include/uapi/linux/genetlink.h
@@ -64,6 +64,8 @@ enum {
CTRL_ATTR_OPS,
CTRL_ATTR_MCAST_GROUPS,
CTRL_ATTR_POLICY,
+ CTRL_ATTR_OP_POLICY,
+ CTRL_ATTR_OP,
__CTRL_ATTR_MAX,
};
@@ -85,6 +87,15 @@ enum {
__CTRL_ATTR_MCAST_GRP_MAX,
};
+enum {
+ CTRL_ATTR_POLICY_UNSPEC,
+ CTRL_ATTR_POLICY_DO,
+ CTRL_ATTR_POLICY_DUMP,
+
+ __CTRL_ATTR_POLICY_DUMP_MAX,
+ CTRL_ATTR_POLICY_DUMP_MAX = __CTRL_ATTR_POLICY_DUMP_MAX - 1
+};
+
#define CTRL_ATTR_MCAST_GRP_MAX (__CTRL_ATTR_MCAST_GRP_MAX - 1)
diff --git a/include/uapi/linux/gtp.h b/include/uapi/linux/gtp.h
index c7d66755d212..79f9191bbb24 100644
--- a/include/uapi/linux/gtp.h
+++ b/include/uapi/linux/gtp.h
@@ -2,6 +2,8 @@
#ifndef _UAPI_LINUX_GTP_H_
#define _UAPI_LINUX_GTP_H_
+#define GTP_GENL_MCGRP_NAME "gtp"
+
enum gtp_genl_cmds {
GTP_CMD_NEWPDP,
GTP_CMD_DELPDP,
diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
index c1227aecd38f..4c687686aa8f 100644
--- a/include/uapi/linux/if_bridge.h
+++ b/include/uapi/linux/if_bridge.h
@@ -455,10 +455,33 @@ enum {
enum {
MDBA_MDB_EATTR_UNSPEC,
MDBA_MDB_EATTR_TIMER,
+ MDBA_MDB_EATTR_SRC_LIST,
+ MDBA_MDB_EATTR_GROUP_MODE,
+ MDBA_MDB_EATTR_SOURCE,
+ MDBA_MDB_EATTR_RTPROT,
__MDBA_MDB_EATTR_MAX
};
#define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1)
+/* per mdb entry source */
+enum {
+ MDBA_MDB_SRCLIST_UNSPEC,
+ MDBA_MDB_SRCLIST_ENTRY,
+ __MDBA_MDB_SRCLIST_MAX
+};
+#define MDBA_MDB_SRCLIST_MAX (__MDBA_MDB_SRCLIST_MAX - 1)
+
+/* per mdb entry per source attributes
+ * these are embedded in MDBA_MDB_SRCLIST_ENTRY
+ */
+enum {
+ MDBA_MDB_SRCATTR_UNSPEC,
+ MDBA_MDB_SRCATTR_ADDRESS,
+ MDBA_MDB_SRCATTR_TIMER,
+ __MDBA_MDB_SRCATTR_MAX
+};
+#define MDBA_MDB_SRCATTR_MAX (__MDBA_MDB_SRCATTR_MAX - 1)
+
/* multicast router types */
enum {
MDB_RTR_TYPE_DISABLED,
@@ -495,6 +518,8 @@ struct br_mdb_entry {
__u8 state;
#define MDB_FLAGS_OFFLOAD (1 << 0)
#define MDB_FLAGS_FAST_LEAVE (1 << 1)
+#define MDB_FLAGS_STAR_EXCL (1 << 2)
+#define MDB_FLAGS_BLOCKED (1 << 3)
__u8 flags;
__u16 vid;
struct {
@@ -509,10 +534,23 @@ struct br_mdb_entry {
enum {
MDBA_SET_ENTRY_UNSPEC,
MDBA_SET_ENTRY,
+ MDBA_SET_ENTRY_ATTRS,
__MDBA_SET_ENTRY_MAX,
};
#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1)
+/* [MDBA_SET_ENTRY_ATTRS] = {
+ * [MDBE_ATTR_xxx]
+ * ...
+ * }
+ */
+enum {
+ MDBE_ATTR_UNSPEC,
+ MDBE_ATTR_SOURCE,
+ __MDBE_ATTR_MAX,
+};
+#define MDBE_ATTR_MAX (__MDBE_ATTR_MAX - 1)
+
/* Embedded inside LINK_XSTATS_TYPE_BRIDGE */
enum {
BRIDGE_XSTATS_UNSPEC,
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index 7fba4de511de..c4b23f06f69e 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -7,24 +7,23 @@
/* This struct should be in sync with struct rtnl_link_stats64 */
struct rtnl_link_stats {
- __u32 rx_packets; /* total packets received */
- __u32 tx_packets; /* total packets transmitted */
- __u32 rx_bytes; /* total bytes received */
- __u32 tx_bytes; /* total bytes transmitted */
- __u32 rx_errors; /* bad packets received */
- __u32 tx_errors; /* packet transmit problems */
- __u32 rx_dropped; /* no space in linux buffers */
- __u32 tx_dropped; /* no space available in linux */
- __u32 multicast; /* multicast packets received */
+ __u32 rx_packets;
+ __u32 tx_packets;
+ __u32 rx_bytes;
+ __u32 tx_bytes;
+ __u32 rx_errors;
+ __u32 tx_errors;
+ __u32 rx_dropped;
+ __u32 tx_dropped;
+ __u32 multicast;
__u32 collisions;
-
/* detailed rx_errors: */
__u32 rx_length_errors;
- __u32 rx_over_errors; /* receiver ring buff overflow */
- __u32 rx_crc_errors; /* recved pkt with crc error */
- __u32 rx_frame_errors; /* recv'd frame alignment error */
- __u32 rx_fifo_errors; /* recv'r fifo overrun */
- __u32 rx_missed_errors; /* receiver missed packet */
+ __u32 rx_over_errors;
+ __u32 rx_crc_errors;
+ __u32 rx_frame_errors;
+ __u32 rx_fifo_errors;
+ __u32 rx_missed_errors;
/* detailed tx_errors */
__u32 tx_aborted_errors;
@@ -37,29 +36,200 @@ struct rtnl_link_stats {
__u32 rx_compressed;
__u32 tx_compressed;
- __u32 rx_nohandler; /* dropped, no handler found */
+ __u32 rx_nohandler;
};
-/* The main device statistics structure */
+/**
+ * struct rtnl_link_stats64 - The main device statistics structure.
+ *
+ * @rx_packets: Number of good packets received by the interface.
+ * For hardware interfaces counts all good packets received from the device
+ * by the host, including packets which host had to drop at various stages
+ * of processing (even in the driver).
+ *
+ * @tx_packets: Number of packets successfully transmitted.
+ * For hardware interfaces counts packets which host was able to successfully
+ * hand over to the device, which does not necessarily mean that packets
+ * had been successfully transmitted out of the device, only that device
+ * acknowledged it copied them out of host memory.
+ *
+ * @rx_bytes: Number of good received bytes, corresponding to @rx_packets.
+ *
+ * For IEEE 802.3 devices should count the length of Ethernet Frames
+ * excluding the FCS.
+ *
+ * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets.
+ *
+ * For IEEE 802.3 devices should count the length of Ethernet Frames
+ * excluding the FCS.
+ *
+ * @rx_errors: Total number of bad packets received on this network device.
+ * This counter must include events counted by @rx_length_errors,
+ * @rx_crc_errors, @rx_frame_errors and other errors not otherwise
+ * counted.
+ *
+ * @tx_errors: Total number of transmit problems.
+ * This counter must include events counter by @tx_aborted_errors,
+ * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors,
+ * @tx_window_errors and other errors not otherwise counted.
+ *
+ * @rx_dropped: Number of packets received but not processed,
+ * e.g. due to lack of resources or unsupported protocol.
+ * For hardware interfaces this counter should not include packets
+ * dropped by the device which are counted separately in
+ * @rx_missed_errors (since procfs folds those two counters together).
+ *
+ * @tx_dropped: Number of packets dropped on their way to transmission,
+ * e.g. due to lack of resources.
+ *
+ * @multicast: Multicast packets received.
+ * For hardware interfaces this statistic is commonly calculated
+ * at the device level (unlike @rx_packets) and therefore may include
+ * packets which did not reach the host.
+ *
+ * For IEEE 802.3 devices this counter may be equivalent to:
+ *
+ * - 30.3.1.1.21 aMulticastFramesReceivedOK
+ *
+ * @collisions: Number of collisions during packet transmissions.
+ *
+ * @rx_length_errors: Number of packets dropped due to invalid length.
+ * Part of aggregate "frame" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices this counter should be equivalent to a sum
+ * of the following attributes:
+ *
+ * - 30.3.1.1.23 aInRangeLengthErrors
+ * - 30.3.1.1.24 aOutOfRangeLengthField
+ * - 30.3.1.1.25 aFrameTooLongErrors
+ *
+ * @rx_over_errors: Receiver FIFO overflow event counter.
+ *
+ * Historically the count of overflow events. Such events may be
+ * reported in the receive descriptors or via interrupts, and may
+ * not correspond one-to-one with dropped packets.
+ *
+ * The recommended interpretation for high speed interfaces is -
+ * number of packets dropped because they did not fit into buffers
+ * provided by the host, e.g. packets larger than MTU or next buffer
+ * in the ring was not available for a scatter transfer.
+ *
+ * Part of aggregate "frame" errors in `/proc/net/dev`.
+ *
+ * This statistics was historically used interchangeably with
+ * @rx_fifo_errors.
+ *
+ * This statistic corresponds to hardware events and is not commonly used
+ * on software devices.
+ *
+ * @rx_crc_errors: Number of packets received with a CRC error.
+ * Part of aggregate "frame" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices this counter must be equivalent to:
+ *
+ * - 30.3.1.1.6 aFrameCheckSequenceErrors
+ *
+ * @rx_frame_errors: Receiver frame alignment errors.
+ * Part of aggregate "frame" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices this counter should be equivalent to:
+ *
+ * - 30.3.1.1.7 aAlignmentErrors
+ *
+ * @rx_fifo_errors: Receiver FIFO error counter.
+ *
+ * Historically the count of overflow events. Those events may be
+ * reported in the receive descriptors or via interrupts, and may
+ * not correspond one-to-one with dropped packets.
+ *
+ * This statistics was used interchangeably with @rx_over_errors.
+ * Not recommended for use in drivers for high speed interfaces.
+ *
+ * This statistic is used on software devices, e.g. to count software
+ * packet queue overflow (can) or sequencing errors (GRE).
+ *
+ * @rx_missed_errors: Count of packets missed by the host.
+ * Folded into the "drop" counter in `/proc/net/dev`.
+ *
+ * Counts number of packets dropped by the device due to lack
+ * of buffer space. This usually indicates that the host interface
+ * is slower than the network interface, or host is not keeping up
+ * with the receive packet rate.
+ *
+ * This statistic corresponds to hardware events and is not used
+ * on software devices.
+ *
+ * @tx_aborted_errors:
+ * Part of aggregate "carrier" errors in `/proc/net/dev`.
+ * For IEEE 802.3 devices capable of half-duplex operation this counter
+ * must be equivalent to:
+ *
+ * - 30.3.1.1.11 aFramesAbortedDueToXSColls
+ *
+ * High speed interfaces may use this counter as a general device
+ * discard counter.
+ *
+ * @tx_carrier_errors: Number of frame transmission errors due to loss
+ * of carrier during transmission.
+ * Part of aggregate "carrier" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices this counter must be equivalent to:
+ *
+ * - 30.3.1.1.13 aCarrierSenseErrors
+ *
+ * @tx_fifo_errors: Number of frame transmission errors due to device
+ * FIFO underrun / underflow. This condition occurs when the device
+ * begins transmission of a frame but is unable to deliver the
+ * entire frame to the transmitter in time for transmission.
+ * Part of aggregate "carrier" errors in `/proc/net/dev`.
+ *
+ * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for
+ * old half-duplex Ethernet.
+ * Part of aggregate "carrier" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices possibly equivalent to:
+ *
+ * - 30.3.2.1.4 aSQETestErrors
+ *
+ * @tx_window_errors: Number of frame transmission errors due
+ * to late collisions (for Ethernet - after the first 64B of transmission).
+ * Part of aggregate "carrier" errors in `/proc/net/dev`.
+ *
+ * For IEEE 802.3 devices this counter must be equivalent to:
+ *
+ * - 30.3.1.1.10 aLateCollisions
+ *
+ * @rx_compressed: Number of correctly received compressed packets.
+ * This counters is only meaningful for interfaces which support
+ * packet compression (e.g. CSLIP, PPP).
+ *
+ * @tx_compressed: Number of transmitted compressed packets.
+ * This counters is only meaningful for interfaces which support
+ * packet compression (e.g. CSLIP, PPP).
+ *
+ * @rx_nohandler: Number of packets received on the interface
+ * but dropped by the networking stack because the device is
+ * not designated to receive packets (e.g. backup link in a bond).
+ */
struct rtnl_link_stats64 {
- __u64 rx_packets; /* total packets received */
- __u64 tx_packets; /* total packets transmitted */
- __u64 rx_bytes; /* total bytes received */
- __u64 tx_bytes; /* total bytes transmitted */
- __u64 rx_errors; /* bad packets received */
- __u64 tx_errors; /* packet transmit problems */
- __u64 rx_dropped; /* no space in linux buffers */
- __u64 tx_dropped; /* no space available in linux */
- __u64 multicast; /* multicast packets received */
+ __u64 rx_packets;
+ __u64 tx_packets;
+ __u64 rx_bytes;
+ __u64 tx_bytes;
+ __u64 rx_errors;
+ __u64 tx_errors;
+ __u64 rx_dropped;
+ __u64 tx_dropped;
+ __u64 multicast;
__u64 collisions;
/* detailed rx_errors: */
__u64 rx_length_errors;
- __u64 rx_over_errors; /* receiver ring buff overflow */
- __u64 rx_crc_errors; /* recved pkt with crc error */
- __u64 rx_frame_errors; /* recv'd frame alignment error */
- __u64 rx_fifo_errors; /* recv'r fifo overrun */
- __u64 rx_missed_errors; /* receiver missed packet */
+ __u64 rx_over_errors;
+ __u64 rx_crc_errors;
+ __u64 rx_frame_errors;
+ __u64 rx_fifo_errors;
+ __u64 rx_missed_errors;
/* detailed tx_errors */
__u64 tx_aborted_errors;
@@ -71,8 +241,7 @@ struct rtnl_link_stats64 {
/* for cslip etc */
__u64 rx_compressed;
__u64 tx_compressed;
-
- __u64 rx_nohandler; /* dropped, no handler found */
+ __u64 rx_nohandler;
};
/* The struct should be in sync with struct ifmap */
diff --git a/include/uapi/linux/if_pppol2tp.h b/include/uapi/linux/if_pppol2tp.h
index 060b4d1f3129..a91044328bc9 100644
--- a/include/uapi/linux/if_pppol2tp.h
+++ b/include/uapi/linux/if_pppol2tp.h
@@ -75,7 +75,7 @@ struct pppol2tpv3in6_addr {
};
/* Socket options:
- * DEBUG - bitmask of debug message categories
+ * DEBUG - bitmask of debug message categories (not used)
* SENDSEQ - 0 => don't send packets with sequence numbers
* 1 => send packets with sequence numbers
* RECVSEQ - 0 => receive packet sequence numbers are optional
diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h
index 5ba122c1949a..20ee93f0f876 100644
--- a/include/uapi/linux/inet_diag.h
+++ b/include/uapi/linux/inet_diag.h
@@ -160,6 +160,7 @@ enum {
INET_DIAG_ULP_INFO,
INET_DIAG_SK_BPF_STORAGES,
INET_DIAG_CGROUP_ID,
+ INET_DIAG_SOCKOPT,
__INET_DIAG_MAX,
};
@@ -183,6 +184,23 @@ struct inet_diag_meminfo {
__u32 idiag_tmem;
};
+/* INET_DIAG_SOCKOPT */
+
+struct inet_diag_sockopt {
+ __u8 recverr:1,
+ is_icsk:1,
+ freebind:1,
+ hdrincl:1,
+ mc_loop:1,
+ transparent:1,
+ mc_all:1,
+ nodefrag:1;
+ __u8 bind_address_no_port:1,
+ recverr_rfc4884:1,
+ defer_connect:1,
+ unused:5;
+};
+
/* INET_DIAG_VEGASINFO */
struct tcpvegas_info {
diff --git a/include/uapi/linux/l2tp.h b/include/uapi/linux/l2tp.h
index 61158f5a1a5b..30c80d5ba4bf 100644
--- a/include/uapi/linux/l2tp.h
+++ b/include/uapi/linux/l2tp.h
@@ -108,7 +108,7 @@ enum {
L2TP_ATTR_VLAN_ID, /* u16 (not used) */
L2TP_ATTR_COOKIE, /* 0, 4 or 8 bytes */
L2TP_ATTR_PEER_COOKIE, /* 0, 4 or 8 bytes */
- L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags */
+ L2TP_ATTR_DEBUG, /* u32, enum l2tp_debug_flags (not used) */
L2TP_ATTR_RECV_SEQ, /* u8 */
L2TP_ATTR_SEND_SEQ, /* u8 */
L2TP_ATTR_LNS_MODE, /* u8 */
@@ -144,6 +144,7 @@ enum {
L2TP_ATTR_RX_OOS_PACKETS, /* u64 */
L2TP_ATTR_RX_ERRORS, /* u64 */
L2TP_ATTR_STATS_PAD,
+ L2TP_ATTR_RX_COOKIE_DISCARDS, /* u64 */
__L2TP_ATTR_STATS_MAX,
};
@@ -177,7 +178,9 @@ enum l2tp_seqmode {
};
/**
- * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions
+ * enum l2tp_debug_flags - debug message categories for L2TP tunnels/sessions.
+ *
+ * Unused.
*
* @L2TP_MSG_DEBUG: verbose debug (if compiled in)
* @L2TP_MSG_CONTROL: userspace - kernel interface
diff --git a/include/uapi/linux/mroute.h b/include/uapi/linux/mroute.h
index 11c8c1fc1124..1a42f5f9b31b 100644
--- a/include/uapi/linux/mroute.h
+++ b/include/uapi/linux/mroute.h
@@ -113,8 +113,8 @@ struct igmpmsg {
__u32 unused1,unused2;
unsigned char im_msgtype; /* What is this */
unsigned char im_mbz; /* Must be zero */
- unsigned char im_vif; /* Interface (this ought to be a vifi_t!) */
- unsigned char unused3;
+ unsigned char im_vif; /* Low 8 bits of Interface */
+ unsigned char im_vif_hi; /* High 8 bits of Interface */
struct in_addr im_src,im_dst;
};
@@ -169,6 +169,7 @@ enum {
IPMRA_CREPORT_SRC_ADDR,
IPMRA_CREPORT_DST_ADDR,
IPMRA_CREPORT_PKT,
+ IPMRA_CREPORT_TABLE,
__IPMRA_CREPORT_MAX
};
#define IPMRA_CREPORT_MAX (__IPMRA_CREPORT_MAX - 1)
diff --git a/include/uapi/linux/netfilter.h b/include/uapi/linux/netfilter.h
index ca9e63d6e0e4..ef9a44286e23 100644
--- a/include/uapi/linux/netfilter.h
+++ b/include/uapi/linux/netfilter.h
@@ -45,7 +45,8 @@ enum nf_inet_hooks {
NF_INET_FORWARD,
NF_INET_LOCAL_OUT,
NF_INET_POST_ROUTING,
- NF_INET_NUMHOOKS
+ NF_INET_NUMHOOKS,
+ NF_INET_INGRESS = NF_INET_NUMHOOKS,
};
enum nf_dev_hooks {
diff --git a/include/uapi/linux/netfilter/nf_tables.h b/include/uapi/linux/netfilter/nf_tables.h
index 2b8e12f7a4a6..98272cb5f617 100644
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@ -172,6 +172,7 @@ enum nft_table_flags {
* @NFTA_TABLE_NAME: name of the table (NLA_STRING)
* @NFTA_TABLE_FLAGS: bitmask of enum nft_table_flags (NLA_U32)
* @NFTA_TABLE_USE: number of chains in this table (NLA_U32)
+ * @NFTA_TABLE_USERDATA: user data (NLA_BINARY)
*/
enum nft_table_attributes {
NFTA_TABLE_UNSPEC,
@@ -180,6 +181,7 @@ enum nft_table_attributes {
NFTA_TABLE_USE,
NFTA_TABLE_HANDLE,
NFTA_TABLE_PAD,
+ NFTA_TABLE_USERDATA,
__NFTA_TABLE_MAX
};
#define NFTA_TABLE_MAX (__NFTA_TABLE_MAX - 1)
@@ -206,6 +208,7 @@ enum nft_chain_flags {
* @NFTA_CHAIN_COUNTERS: counter specification of the chain (NLA_NESTED: nft_counter_attributes)
* @NFTA_CHAIN_FLAGS: chain flags
* @NFTA_CHAIN_ID: uniquely identifies a chain in a transaction (NLA_U32)
+ * @NFTA_CHAIN_USERDATA: user data (NLA_BINARY)
*/
enum nft_chain_attributes {
NFTA_CHAIN_UNSPEC,
@@ -220,6 +223,7 @@ enum nft_chain_attributes {
NFTA_CHAIN_PAD,
NFTA_CHAIN_FLAGS,
NFTA_CHAIN_ID,
+ NFTA_CHAIN_USERDATA,
__NFTA_CHAIN_MAX
};
#define NFTA_CHAIN_MAX (__NFTA_CHAIN_MAX - 1)
@@ -745,10 +749,12 @@ enum nft_payload_bases {
*
* @NFT_PAYLOAD_CSUM_NONE: no checksumming
* @NFT_PAYLOAD_CSUM_INET: internet checksum (RFC 791)
+ * @NFT_PAYLOAD_CSUM_SCTP: CRC-32c, for use in SCTP header (RFC 3309)
*/
enum nft_payload_csum_types {
NFT_PAYLOAD_CSUM_NONE,
NFT_PAYLOAD_CSUM_INET,
+ NFT_PAYLOAD_CSUM_SCTP,
};
enum nft_payload_csum_flags {
@@ -1008,10 +1014,12 @@ enum nft_socket_attributes {
*
* @NFT_SOCKET_TRANSPARENT: Value of the IP(V6)_TRANSPARENT socket option
* @NFT_SOCKET_MARK: Value of the socket mark
+ * @NFT_SOCKET_WILDCARD: Whether the socket is zero-bound (e.g. 0.0.0.0 or ::0)
*/
enum nft_socket_keys {
NFT_SOCKET_TRANSPARENT,
NFT_SOCKET_MARK,
+ NFT_SOCKET_WILDCARD,
__NFT_SOCKET_MAX
};
#define NFT_SOCKET_MAX (__NFT_SOCKET_MAX - 1)
@@ -1555,6 +1563,7 @@ enum nft_ct_expectation_attributes {
* @NFTA_OBJ_DATA: stateful object data (NLA_NESTED)
* @NFTA_OBJ_USE: number of references to this expression (NLA_U32)
* @NFTA_OBJ_HANDLE: object handle (NLA_U64)
+ * @NFTA_OBJ_USERDATA: user data (NLA_BINARY)
*/
enum nft_object_attributes {
NFTA_OBJ_UNSPEC,
@@ -1565,6 +1574,7 @@ enum nft_object_attributes {
NFTA_OBJ_USE,
NFTA_OBJ_HANDLE,
NFTA_OBJ_PAD,
+ NFTA_OBJ_USERDATA,
__NFTA_OBJ_MAX
};
#define NFTA_OBJ_MAX (__NFTA_OBJ_MAX - 1)
diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
index 262881792671..d8484be72fdc 100644
--- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -247,7 +247,7 @@ enum ctattr_stats_cpu {
CTA_STATS_FOUND,
CTA_STATS_NEW, /* no longer used */
CTA_STATS_INVALID,
- CTA_STATS_IGNORE,
+ CTA_STATS_IGNORE, /* no longer used */
CTA_STATS_DELETE, /* no longer used */
CTA_STATS_DELETE_LIST, /* no longer used */
CTA_STATS_INSERT,
@@ -256,6 +256,7 @@ enum ctattr_stats_cpu {
CTA_STATS_EARLY_DROP,
CTA_STATS_ERROR,
CTA_STATS_SEARCH_RESTART,
+ CTA_STATS_CLASH_RESOLVE,
__CTA_STATS_MAX,
};
#define CTA_STATS_MAX (__CTA_STATS_MAX - 1)
diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h
index eac8a6a648ea..c3816ff7bfc3 100644
--- a/include/uapi/linux/netlink.h
+++ b/include/uapi/linux/netlink.h
@@ -129,6 +129,7 @@ struct nlmsgerr {
* @NLMSGERR_ATTR_COOKIE: arbitrary subsystem specific cookie to
* be used - in the success case - to identify a created
* object or operation or similar (binary)
+ * @NLMSGERR_ATTR_POLICY: policy for a rejected attribute
* @__NLMSGERR_ATTR_MAX: number of attributes
* @NLMSGERR_ATTR_MAX: highest attribute number
*/
@@ -137,6 +138,7 @@ enum nlmsgerr_attrs {
NLMSGERR_ATTR_MSG,
NLMSGERR_ATTR_OFFS,
NLMSGERR_ATTR_COOKIE,
+ NLMSGERR_ATTR_POLICY,
__NLMSGERR_ATTR_MAX,
NLMSGERR_ATTR_MAX = __NLMSGERR_ATTR_MAX - 1
@@ -331,6 +333,7 @@ enum netlink_attribute_type {
* the index, if limited inside the nesting (U32)
* @NL_POLICY_TYPE_ATTR_BITFIELD32_MASK: valid mask for the
* bitfield32 type (U32)
+ * @NL_POLICY_TYPE_ATTR_MASK: mask of valid bits for unsigned integers (U64)
* @NL_POLICY_TYPE_ATTR_PAD: pad attribute for 64-bit alignment
*/
enum netlink_policy_type_attr {
@@ -346,6 +349,7 @@ enum netlink_policy_type_attr {
NL_POLICY_TYPE_ATTR_POLICY_MAXTYPE,
NL_POLICY_TYPE_ATTR_BITFIELD32_MASK,
NL_POLICY_TYPE_ATTR_PAD,
+ NL_POLICY_TYPE_ATTR_MASK,
/* keep last */
__NL_POLICY_TYPE_ATTR_MAX,
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 631f3a997b3c..47700a2b9af9 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -252,9 +252,13 @@
* DOC: SAE authentication offload
*
* By setting @NL80211_EXT_FEATURE_SAE_OFFLOAD flag drivers can indicate they
- * support offloading SAE authentication for WPA3-Personal networks. In
- * %NL80211_CMD_CONNECT the password for SAE should be specified using
- * %NL80211_ATTR_SAE_PASSWORD.
+ * support offloading SAE authentication for WPA3-Personal networks in station
+ * mode. Similarly @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP flag can be set by
+ * drivers indicating the offload support in AP mode.
+ *
+ * The password for SAE should be specified using %NL80211_ATTR_SAE_PASSWORD in
+ * %NL80211_CMD_CONNECT and %NL80211_CMD_START_AP for station and AP mode
+ * respectively.
*/
/**
@@ -647,13 +651,9 @@
* authentication/association or not receiving a response from the AP.
* Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
* well to remain backwards compatible.
- * When establishing a security association, drivers that support 4 way
- * handshake offload should send %NL80211_CMD_PORT_AUTHORIZED event when
- * the 4 way handshake is completed successfully.
* @NL80211_CMD_ROAM: Notification indicating the card/driver roamed by itself.
- * When a security association was established with the new AP (e.g. if
- * the FT protocol was used for roaming or the driver completed the 4 way
- * handshake), this event should be followed by an
+ * When a security association was established on an 802.1X network using
+ * fast transition, this event should be followed by an
* %NL80211_CMD_PORT_AUTHORIZED event.
* @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
* userspace that a connection was dropped by the AP or due to other
@@ -1067,13 +1067,11 @@
* @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
* configured PMK for the authenticator address identified by
* %NL80211_ATTR_MAC.
- * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates that the 4 way
- * handshake was completed successfully by the driver. The BSSID is
- * specified with %NL80211_ATTR_MAC. Drivers that support 4 way handshake
- * offload should send this event after indicating 802.11 association with
- * %NL80211_CMD_CONNECT or %NL80211_CMD_ROAM. If the 4 way handshake failed
- * %NL80211_CMD_DISCONNECT should be indicated instead.
- *
+ * @NL80211_CMD_PORT_AUTHORIZED: An event that indicates an 802.1X FT roam was
+ * completed successfully. Drivers that support 4 way handshake offload
+ * should send this event after indicating 802.1X FT assocation with
+ * %NL80211_CMD_ROAM. If the 4 way handshake failed %NL80211_CMD_DISCONNECT
+ * should be indicated instead.
* @NL80211_CMD_CONTROL_PORT_FRAME: Control Port (e.g. PAE) frame TX request
* and RX notification. This command is used both as a request to transmit
* a control port frame and as a notification that a control port frame
@@ -2082,10 +2080,10 @@ enum nl80211_commands {
* operation).
* @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information
* for the time while performing a channel switch.
- * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel
- * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
- * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel
- * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP).
+ * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel
+ * switch or color change counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL).
+ * @NL80211_ATTR_CNTDWN_OFFS_PRESP: An array of offsets (u16) to the channel
+ * switch or color change counters in the probe response (%NL80211_ATTR_PROBE_RESP).
*
* @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32.
* As specified in the &enum nl80211_rxmgmt_flags.
@@ -2515,6 +2513,20 @@ enum nl80211_commands {
* @NL80211_ATTR_HE_6GHZ_CAPABILITY: HE 6 GHz Band Capability element (from
* association request when used with NL80211_CMD_NEW_STATION).
*
+ * @NL80211_ATTR_FILS_DISCOVERY: Optional parameter to configure FILS
+ * discovery. It is a nested attribute, see
+ * &enum nl80211_fils_discovery_attributes.
+ *
+ * @NL80211_ATTR_UNSOL_BCAST_PROBE_RESP: Optional parameter to configure
+ * unsolicited broadcast probe response. It is a nested attribute, see
+ * &enum nl80211_unsol_bcast_probe_resp_attributes.
+ *
+ * @NL80211_ATTR_S1G_CAPABILITY: S1G Capability information element (from
+ * association request when used with NL80211_CMD_NEW_STATION)
+ * @NL80211_ATTR_S1G_CAPABILITY_MASK: S1G Capability Information element
+ * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in
+ * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT.
+ *
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2821,8 +2833,8 @@ enum nl80211_attrs {
NL80211_ATTR_CH_SWITCH_COUNT,
NL80211_ATTR_CH_SWITCH_BLOCK_TX,
NL80211_ATTR_CSA_IES,
- NL80211_ATTR_CSA_C_OFF_BEACON,
- NL80211_ATTR_CSA_C_OFF_PRESP,
+ NL80211_ATTR_CNTDWN_OFFS_BEACON,
+ NL80211_ATTR_CNTDWN_OFFS_PRESP,
NL80211_ATTR_RXMGMT_FLAGS,
@@ -2997,6 +3009,13 @@ enum nl80211_attrs {
NL80211_ATTR_HE_6GHZ_CAPABILITY,
+ NL80211_ATTR_FILS_DISCOVERY,
+
+ NL80211_ATTR_UNSOL_BCAST_PROBE_RESP,
+
+ NL80211_ATTR_S1G_CAPABILITY,
+ NL80211_ATTR_S1G_CAPABILITY_MASK,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
@@ -3009,6 +3028,8 @@ enum nl80211_attrs {
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
#define NL80211_ATTR_SAE_DATA NL80211_ATTR_AUTH_DATA
+#define NL80211_ATTR_CSA_C_OFF_BEACON NL80211_ATTR_CNTDWN_OFFS_BEACON
+#define NL80211_ATTR_CSA_C_OFF_PRESP NL80211_ATTR_CNTDWN_OFFS_PRESP
/*
* Allow user space programs to use #ifdef on new attributes by defining them
@@ -3187,6 +3208,18 @@ enum nl80211_he_gi {
};
/**
+ * enum nl80211_he_ltf - HE long training field
+ * @NL80211_RATE_INFO_HE_1xLTF: 3.2 usec
+ * @NL80211_RATE_INFO_HE_2xLTF: 6.4 usec
+ * @NL80211_RATE_INFO_HE_4xLTF: 12.8 usec
+ */
+enum nl80211_he_ltf {
+ NL80211_RATE_INFO_HE_1XLTF,
+ NL80211_RATE_INFO_HE_2XLTF,
+ NL80211_RATE_INFO_HE_4XLTF,
+};
+
+/**
* enum nl80211_he_ru_alloc - HE RU allocation values
* @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
* @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
@@ -3725,6 +3758,16 @@ enum nl80211_wmm_rule {
* @NL80211_FREQUENCY_ATTR_NO_HE: HE operation is not allowed on this channel
* in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_OFFSET: frequency offset in KHz
+ * @NL80211_FREQUENCY_ATTR_1MHZ: 1 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_2MHZ: 2 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_4MHZ: 4 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_8MHZ: 8 MHz operation is allowed
+ * on this channel in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_16MHZ: 16 MHz operation is allowed
+ * on this channel in current regulatory domain.
* @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
* currently defined
* @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -3756,6 +3799,11 @@ enum nl80211_frequency_attr {
NL80211_FREQUENCY_ATTR_WMM,
NL80211_FREQUENCY_ATTR_NO_HE,
NL80211_FREQUENCY_ATTR_OFFSET,
+ NL80211_FREQUENCY_ATTR_1MHZ,
+ NL80211_FREQUENCY_ATTR_2MHZ,
+ NL80211_FREQUENCY_ATTR_4MHZ,
+ NL80211_FREQUENCY_ATTR_8MHZ,
+ NL80211_FREQUENCY_ATTR_16MHZ,
/* keep last */
__NL80211_FREQUENCY_ATTR_AFTER_LAST,
@@ -4049,6 +4097,7 @@ enum nl80211_user_reg_hint_type {
* receiving frames destined to the local BSS
* @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
* currently defined
+ * @NL80211_SURVEY_INFO_FREQUENCY_OFFSET: center frequency offset in KHz
* @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
*/
enum nl80211_survey_info {
@@ -4064,6 +4113,7 @@ enum nl80211_survey_info {
NL80211_SURVEY_INFO_TIME_SCAN,
NL80211_SURVEY_INFO_PAD,
NL80211_SURVEY_INFO_TIME_BSS_RX,
+ NL80211_SURVEY_INFO_FREQUENCY_OFFSET,
/* keep last */
__NL80211_SURVEY_INFO_AFTER_LAST,
@@ -4741,6 +4791,10 @@ enum nl80211_key_attributes {
* @NL80211_TXRATE_VHT: VHT rates allowed for TX rate selection,
* see &struct nl80211_txrate_vht
* @NL80211_TXRATE_GI: configure GI, see &enum nl80211_txrate_gi
+ * @NL80211_TXRATE_HE: HE rates allowed for TX rate selection,
+ * see &struct nl80211_txrate_he
+ * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
+ * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
* @__NL80211_TXRATE_AFTER_LAST: internal
* @NL80211_TXRATE_MAX: highest TX rate attribute
*/
@@ -4750,6 +4804,9 @@ enum nl80211_tx_rate_attributes {
NL80211_TXRATE_HT,
NL80211_TXRATE_VHT,
NL80211_TXRATE_GI,
+ NL80211_TXRATE_HE,
+ NL80211_TXRATE_HE_GI,
+ NL80211_TXRATE_HE_LTF,
/* keep last */
__NL80211_TXRATE_AFTER_LAST,
@@ -4767,6 +4824,15 @@ struct nl80211_txrate_vht {
__u16 mcs[NL80211_VHT_NSS_MAX];
};
+#define NL80211_HE_NSS_MAX 8
+/**
+ * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
+ * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
+ */
+struct nl80211_txrate_he {
+ __u16 mcs[NL80211_HE_NSS_MAX];
+};
+
enum nl80211_txrate_gi {
NL80211_TXRATE_DEFAULT_GI,
NL80211_TXRATE_FORCE_SGI,
@@ -5821,6 +5887,15 @@ enum nl80211_feature_flags {
* handshake with PSK in AP mode (PSK is passed as part of the start AP
* command).
*
+ * @NL80211_EXT_FEATURE_SAE_OFFLOAD_AP: Device wants to do SAE authentication
+ * in AP mode (SAE password is passed as part of the start AP command).
+ *
+ * @NL80211_EXT_FEATURE_FILS_DISCOVERY: Driver/device supports FILS discovery
+ * frames transmission
+ *
+ * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports
+ * unsolicited broadcast probe response transmission
+ *
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@@ -5878,6 +5953,9 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211_TX_STATUS,
NL80211_EXT_FEATURE_OPERATING_CHANNEL_VALIDATION,
NL80211_EXT_FEATURE_4WAY_HANDSHAKE_AP_PSK,
+ NL80211_EXT_FEATURE_SAE_OFFLOAD_AP,
+ NL80211_EXT_FEATURE_FILS_DISCOVERY,
+ NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
@@ -5992,6 +6070,8 @@ enum nl80211_timeout_reason {
* @NL80211_SCAN_FLAG_FREQ_KHZ: report scan results with
* %NL80211_ATTR_SCAN_FREQ_KHZ. This also means
* %NL80211_ATTR_SCAN_FREQUENCIES will not be included.
+ * @NL80211_SCAN_FLAG_COLOCATED_6GHZ: scan for colocated APs reported by
+ * 2.4/5 GHz APs
*/
enum nl80211_scan_flags {
NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
@@ -6008,6 +6088,7 @@ enum nl80211_scan_flags {
NL80211_SCAN_FLAG_RANDOM_SN = 1<<11,
NL80211_SCAN_FLAG_MIN_PREQ_CONTENT = 1<<12,
NL80211_SCAN_FLAG_FREQ_KHZ = 1<<13,
+ NL80211_SCAN_FLAG_COLOCATED_6GHZ = 1<<14,
};
/**
@@ -6910,6 +6991,13 @@ enum nl80211_peer_measurement_ftm_resp {
*
* @NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET: the OBSS PD minimum tx power offset.
* @NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET: the OBSS PD maximum tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET: the non-SRG OBSS PD maximum
+ * tx power offset.
+ * @NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP: bitmap that indicates the BSS color
+ * values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP: bitmap that indicates the partial
+ * BSSID values used by members of the SRG.
+ * @NL80211_HE_OBSS_PD_ATTR_SR_CTRL: The SR Control field of SRP element.
*
* @__NL80211_HE_OBSS_PD_ATTR_LAST: Internal
* @NL80211_HE_OBSS_PD_ATTR_MAX: highest OBSS PD attribute.
@@ -6919,6 +7007,10 @@ enum nl80211_obss_pd_attributes {
NL80211_HE_OBSS_PD_ATTR_MIN_OFFSET,
NL80211_HE_OBSS_PD_ATTR_MAX_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_NON_SRG_MAX_OFFSET,
+ NL80211_HE_OBSS_PD_ATTR_BSS_COLOR_BITMAP,
+ NL80211_HE_OBSS_PD_ATTR_PARTIAL_BSSID_BITMAP,
+ NL80211_HE_OBSS_PD_ATTR_SR_CTRL,
/* keep last */
__NL80211_HE_OBSS_PD_ATTR_LAST,
@@ -6972,4 +7064,64 @@ enum nl80211_iftype_akm_attributes {
NL80211_IFTYPE_AKM_ATTR_MAX = __NL80211_IFTYPE_AKM_ATTR_LAST - 1,
};
+/**
+ * enum nl80211_fils_discovery_attributes - FILS discovery configuration
+ * from IEEE Std 802.11ai-2016, Annex C.3 MIB detail.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_INVALID: Invalid
+ *
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MIN: Minimum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_INT_MAX: Maximum packet interval (u32, TU).
+ * Allowed range: 0..10000 (TU = Time Unit)
+ * @NL80211_FILS_DISCOVERY_ATTR_TMPL: Template data for FILS discovery action
+ * frame including the headers.
+ *
+ * @__NL80211_FILS_DISCOVERY_ATTR_LAST: Internal
+ * @NL80211_FILS_DISCOVERY_ATTR_MAX: highest attribute
+ */
+enum nl80211_fils_discovery_attributes {
+ __NL80211_FILS_DISCOVERY_ATTR_INVALID,
+
+ NL80211_FILS_DISCOVERY_ATTR_INT_MIN,
+ NL80211_FILS_DISCOVERY_ATTR_INT_MAX,
+ NL80211_FILS_DISCOVERY_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_FILS_DISCOVERY_ATTR_LAST,
+ NL80211_FILS_DISCOVERY_ATTR_MAX = __NL80211_FILS_DISCOVERY_ATTR_LAST - 1
+};
+
+/*
+ * FILS discovery template minimum length with action frame headers and
+ * mandatory fields.
+ */
+#define NL80211_FILS_DISCOVERY_TMPL_MIN_LEN 42
+
+/**
+ * enum nl80211_unsol_bcast_probe_resp_attributes - Unsolicited broadcast probe
+ * response configuration. Applicable only in 6GHz.
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID: Invalid
+ *
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT: Maximum packet interval (u32, TU).
+ * Allowed range: 0..20 (TU = Time Unit). IEEE P802.11ax/D6.0
+ * 26.17.2.3.2 (AP behavior for fast passive scanning).
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL: Unsolicited broadcast probe response
+ * frame template (binary).
+ *
+ * @__NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST: Internal
+ * @NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX: highest attribute
+ */
+enum nl80211_unsol_bcast_probe_resp_attributes {
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INVALID,
+
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_INT,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_TMPL,
+
+ /* keep last */
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST,
+ NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX =
+ __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1
+};
#endif /* __LINUX_NL80211_H */
diff --git a/include/uapi/linux/tc_act/tc_mpls.h b/include/uapi/linux/tc_act/tc_mpls.h
index 9360e95273c7..9e4e8f52a779 100644
--- a/include/uapi/linux/tc_act/tc_mpls.h
+++ b/include/uapi/linux/tc_act/tc_mpls.h
@@ -10,6 +10,7 @@
#define TCA_MPLS_ACT_PUSH 2
#define TCA_MPLS_ACT_MODIFY 3
#define TCA_MPLS_ACT_DEC_TTL 4
+#define TCA_MPLS_ACT_MAC_PUSH 5
struct tc_mpls {
tc_gen; /* generic TC action fields. */
diff --git a/include/uapi/linux/tc_act/tc_vlan.h b/include/uapi/linux/tc_act/tc_vlan.h
index 168995b54a70..5b306fe815cc 100644
--- a/include/uapi/linux/tc_act/tc_vlan.h
+++ b/include/uapi/linux/tc_act/tc_vlan.h
@@ -16,6 +16,8 @@
#define TCA_VLAN_ACT_POP 1
#define TCA_VLAN_ACT_PUSH 2
#define TCA_VLAN_ACT_MODIFY 3
+#define TCA_VLAN_ACT_POP_ETH 4
+#define TCA_VLAN_ACT_PUSH_ETH 5
struct tc_vlan {
tc_gen;
@@ -30,6 +32,8 @@ enum {
TCA_VLAN_PUSH_VLAN_PROTOCOL,
TCA_VLAN_PAD,
TCA_VLAN_PUSH_VLAN_PRIORITY,
+ TCA_VLAN_PUSH_ETH_DST,
+ TCA_VLAN_PUSH_ETH_SRC,
__TCA_VLAN_MAX,
};
#define TCA_VLAN_MAX (__TCA_VLAN_MAX - 1)
diff --git a/include/uapi/linux/tipc.h b/include/uapi/linux/tipc.h
index add01db1daef..80ea15e12113 100644
--- a/include/uapi/linux/tipc.h
+++ b/include/uapi/linux/tipc.h
@@ -254,6 +254,8 @@ static inline int tipc_aead_key_size(struct tipc_aead_key *key)
return sizeof(*key) + key->keylen;
}
+#define TIPC_REKEYING_NOW (~0U)
+
/* The macros and functions below are deprecated:
*/
diff --git a/include/uapi/linux/tipc_netlink.h b/include/uapi/linux/tipc_netlink.h
index dc0d23a50e69..d847dd671d79 100644
--- a/include/uapi/linux/tipc_netlink.h
+++ b/include/uapi/linux/tipc_netlink.h
@@ -165,6 +165,8 @@ enum {
TIPC_NLA_NODE_UP, /* flag */
TIPC_NLA_NODE_ID, /* data */
TIPC_NLA_NODE_KEY, /* data */
+ TIPC_NLA_NODE_KEY_MASTER, /* flag */
+ TIPC_NLA_NODE_REKEYING, /* u32 */
__TIPC_NLA_NODE_MAX,
TIPC_NLA_NODE_MAX = __TIPC_NLA_NODE_MAX - 1