diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mtd/cfi.h | 22 | ||||
| -rw-r--r-- | include/linux/mtd/nand.h | 12 | ||||
| -rw-r--r-- | include/linux/platform_data/elm.h | 16 | ||||
| -rw-r--r-- | include/linux/platform_data/mtd-nand-omap2.h | 1 |
4 files changed, 40 insertions, 11 deletions
diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h index 37ef6b194089..299d7d31fe53 100644 --- a/include/linux/mtd/cfi.h +++ b/include/linux/mtd/cfi.h @@ -153,7 +153,7 @@ struct cfi_ident { uint16_t MaxBufWriteSize; uint8_t NumEraseRegions; uint32_t EraseRegionInfo[0]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; /* Extended Query Structure for both PRI and ALT */ @@ -161,7 +161,7 @@ struct cfi_extquery { uint8_t pri[3]; uint8_t MajorVersion; uint8_t MinorVersion; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */ @@ -180,7 +180,7 @@ struct cfi_pri_intelext { uint8_t FactProtRegSize; uint8_t UserProtRegSize; uint8_t extra[0]; -} __attribute__((packed)); +} __packed; struct cfi_intelext_otpinfo { uint32_t ProtRegAddr; @@ -188,7 +188,7 @@ struct cfi_intelext_otpinfo { uint8_t FactProtRegSize; uint16_t UserGroups; uint8_t UserProtRegSize; -} __attribute__((packed)); +} __packed; struct cfi_intelext_blockinfo { uint16_t NumIdentBlocks; @@ -196,7 +196,7 @@ struct cfi_intelext_blockinfo { uint16_t MinBlockEraseCycles; uint8_t BitsPerCell; uint8_t BlockCap; -} __attribute__((packed)); +} __packed; struct cfi_intelext_regioninfo { uint16_t NumIdentPartitions; @@ -205,7 +205,7 @@ struct cfi_intelext_regioninfo { uint8_t NumOpAllowedSimEraMode; uint8_t NumBlockTypes; struct cfi_intelext_blockinfo BlockTypes[1]; -} __attribute__((packed)); +} __packed; struct cfi_intelext_programming_regioninfo { uint8_t ProgRegShift; @@ -214,7 +214,7 @@ struct cfi_intelext_programming_regioninfo { uint8_t Reserved2; uint8_t ControlInvalid; uint8_t Reserved3; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */ @@ -233,7 +233,7 @@ struct cfi_pri_amdstd { uint8_t VppMin; uint8_t VppMax; uint8_t TopBottom; -} __attribute__((packed)); +} __packed; /* Vendor-Specific PRI for Atmel chips (command set 0x0002) */ @@ -245,18 +245,18 @@ struct cfi_pri_atmel { uint8_t BottomBoot; uint8_t BurstMode; uint8_t PageMode; -} __attribute__((packed)); +} __packed; struct cfi_pri_query { uint8_t NumFields; uint32_t ProtField[1]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; struct cfi_bri_query { uint8_t PageModeReadCap; uint8_t NumFields; uint32_t ConfField[1]; /* Not host ordered */ -} __attribute__((packed)); +} __packed; #define P_ID_NONE 0x0000 #define P_ID_INTEL_EXT 0x0001 diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c300db3ae285..e4d451e4600b 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -587,6 +587,11 @@ struct nand_buffers { * @ecc_step_ds: [INTERN] ECC step required by the @ecc_strength_ds, * also from the datasheet. It is the recommended ECC step * size, if known; if unknown, set to zero. + * @onfi_timing_mode_default: [INTERN] default ONFI timing mode. This field is + * either deduced from the datasheet if the NAND + * chip is not ONFI compliant or set to 0 if it is + * (an ONFI chip is always configured in mode 0 + * after a NAND reset) * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 @@ -671,6 +676,7 @@ struct nand_chip { uint8_t bits_per_cell; uint16_t ecc_strength_ds; uint16_t ecc_step_ds; + int onfi_timing_mode_default; int badblockpos; int badblockbits; @@ -766,12 +772,17 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc: ECC correctability and step information from the datasheet. * @ecc.strength_ds: The ECC correctability from the datasheet, same as the * @ecc_strength_ds in nand_chip{}. * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the * @ecc_step_ds in nand_chip{}, also from the datasheet. * For example, the "4bit ECC for each 512Byte" can be set with * NAND_ECC_INFO(4, 512). + * @onfi_timing_mode_default: the default ONFI timing mode entered after a NAND + * reset. Should be deduced from timings described + * in the datasheet. + * */ struct nand_flash_dev { char *name; @@ -792,6 +803,7 @@ struct nand_flash_dev { uint16_t strength_ds; uint16_t step_ds; } ecc; + int onfi_timing_mode_default; }; /** diff --git a/include/linux/platform_data/elm.h b/include/linux/platform_data/elm.h index 780d1e97f620..b8686c00f15f 100644 --- a/include/linux/platform_data/elm.h +++ b/include/linux/platform_data/elm.h @@ -42,8 +42,24 @@ struct elm_errorvec { int error_loc[16]; }; +#if IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH) void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, struct elm_errorvec *err_vec); int elm_config(struct device *dev, enum bch_ecc bch_type, int ecc_steps, int ecc_step_size, int ecc_syndrome_size); +#else +static inline void +elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc, + struct elm_errorvec *err_vec) +{ +} + +static inline int elm_config(struct device *dev, enum bch_ecc bch_type, + int ecc_steps, int ecc_step_size, + int ecc_syndrome_size) +{ + return -ENOSYS; +} +#endif /* CONFIG_MTD_NAND_ECC_BCH */ + #endif /* __ELM_H */ diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h index 16ec262dfcc8..090bbab0130a 100644 --- a/include/linux/platform_data/mtd-nand-omap2.h +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -71,6 +71,7 @@ struct omap_nand_platform_data { struct mtd_partition *parts; int nr_parts; bool dev_ready; + bool flash_bbt; enum nand_io xfer_type; int devsize; enum omap_ecc ecc_opt; |