summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
Diffstat (limited to 'include')
-rw-r--r--include/linux/cyclades.h364
-rw-r--r--include/linux/isicom.h85
-rw-r--r--include/linux/pci_ids.h31
-rw-r--r--include/linux/serial_core.h10
-rw-r--r--include/linux/serial_s3c.h16
-rw-r--r--include/linux/tty.h103
-rw-r--r--include/linux/tty_driver.h2
-rw-r--r--include/linux/tty_ldisc.h3
-rw-r--r--include/net/nfc/nci_core.h2
-rw-r--r--include/uapi/linux/cyclades.h494
-rw-r--r--include/uapi/linux/major.h2
-rw-r--r--include/uapi/linux/serial.h4
-rw-r--r--include/uapi/linux/tty_flags.h8
13 files changed, 30 insertions, 1094 deletions
diff --git a/include/linux/cyclades.h b/include/linux/cyclades.h
deleted file mode 100644
index 05ee0f19448a..000000000000
--- a/include/linux/cyclades.h
+++ /dev/null
@@ -1,364 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
- * linux/include/linux/cyclades.h
- *
- * This file was initially written by
- * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
- * Ivan Passos <ivan@cyclades.com>.
- *
- * This file contains the general definitions for the cyclades.c driver
- *$Log: cyclades.h,v $
- *Revision 3.1 2002/01/29 11:36:16 henrique
- *added throttle field on struct cyclades_port to indicate whether the
- *port is throttled or not
- *
- *Revision 3.1 2000/04/19 18:52:52 ivan
- *converted address fields to unsigned long and added fields for physical
- *addresses on cyclades_card structure;
- *
- *Revision 3.0 1998/11/02 14:20:59 ivan
- *added nports field on cyclades_card structure;
- *
- *Revision 2.5 1998/08/03 16:57:01 ivan
- *added cyclades_idle_stats structure;
- *
- *Revision 2.4 1998/06/01 12:09:53 ivan
- *removed closing_wait2 from cyclades_port structure;
- *
- *Revision 2.3 1998/03/16 18:01:12 ivan
- *changes in the cyclades_port structure to get it closer to the
- *standard serial port structure;
- *added constants for new ioctls;
- *
- *Revision 2.2 1998/02/17 16:50:00 ivan
- *changes in the cyclades_port structure (addition of shutdown_wait and
- *chip_rev variables);
- *added constants for new ioctls and for CD1400 rev. numbers.
- *
- *Revision 2.1 1997/10/24 16:03:00 ivan
- *added rflow (which allows enabling the CD1400 special flow control
- *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
- *cyclades_port structure;
- *added Alpha support
- *
- *Revision 2.0 1997/06/30 10:30:00 ivan
- *added some new doorbell command constants related to IOCTLW and
- *UART error signaling
- *
- *Revision 1.8 1997/06/03 15:30:00 ivan
- *added constant ZFIRM_HLT
- *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
- *
- *Revision 1.7 1997/03/26 10:30:00 daniel
- *new entries at the end of cyclades_port struct to reallocate
- *variables illegally allocated within card memory.
- *
- *Revision 1.6 1996/09/09 18:35:30 bentson
- *fold in changes for Cyclom-Z -- including structures for
- *communicating with board as well modest changes to original
- *structures to support new features.
- *
- *Revision 1.5 1995/11/13 21:13:31 bentson
- *changes suggested by Michael Chastain <mec@duracef.shout.net>
- *to support use of this file in non-kernel applications
- *
- *
- */
-#ifndef _LINUX_CYCLADES_H
-#define _LINUX_CYCLADES_H
-
-#include <uapi/linux/cyclades.h>
-
-
-/* Per card data structure */
-struct cyclades_card {
- void __iomem *base_addr;
- union {
- void __iomem *p9050;
- struct RUNTIME_9060 __iomem *p9060;
- } ctl_addr;
- struct BOARD_CTRL __iomem *board_ctrl; /* cyz specific */
- int irq;
- unsigned int num_chips; /* 0 if card absent, -1 if Z/PCI, else Y */
- unsigned int first_line; /* minor number of first channel on card */
- unsigned int nports; /* Number of ports in the card */
- int bus_index; /* address shift - 0 for ISA, 1 for PCI */
- int intr_enabled; /* FW Interrupt flag - 0 disabled, 1 enabled */
- u32 hw_ver;
- spinlock_t card_lock;
- struct cyclades_port *ports;
-};
-
-/***************************************
- * Memory access functions/macros *
- * (required to support Alpha systems) *
- ***************************************/
-
-#define cy_writeb(port,val) do { writeb((val), (port)); mb(); } while (0)
-#define cy_writew(port,val) do { writew((val), (port)); mb(); } while (0)
-#define cy_writel(port,val) do { writel((val), (port)); mb(); } while (0)
-
-/*
- * Statistics counters
- */
-struct cyclades_icount {
- __u32 cts, dsr, rng, dcd, tx, rx;
- __u32 frame, parity, overrun, brk;
- __u32 buf_overrun;
-};
-
-/*
- * This is our internal structure for each serial port's state.
- *
- * Many fields are paralleled by the structure used by the serial_struct
- * structure.
- *
- * For definitions of the flags field, see tty.h
- */
-
-struct cyclades_port {
- int magic;
- struct tty_port port;
- struct cyclades_card *card;
- union {
- struct {
- void __iomem *base_addr;
- } cyy;
- struct {
- struct CH_CTRL __iomem *ch_ctrl;
- struct BUF_CTRL __iomem *buf_ctrl;
- } cyz;
- } u;
- int line;
- int flags; /* defined in tty.h */
- int type; /* UART type */
- int read_status_mask;
- int ignore_status_mask;
- int timeout;
- int xmit_fifo_size;
- int cor1,cor2,cor3,cor4,cor5;
- int tbpr,tco,rbpr,rco;
- int baud;
- int rflow;
- int rtsdtr_inv;
- int chip_rev;
- int custom_divisor;
- u8 x_char; /* to be pushed out ASAP */
- int breakon;
- int breakoff;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- int default_threshold;
- int default_timeout;
- unsigned long rflush_count;
- struct cyclades_monitor mon;
- struct cyclades_idle_stats idle_stats;
- struct cyclades_icount icount;
- struct completion shutdown_wait;
- int throttle;
-#ifdef CONFIG_CYZ_INTR
- struct timer_list rx_full_timer;
-#endif
-};
-
-#define CLOSING_WAIT_DELAY 30*HZ
-#define CY_CLOSING_WAIT_NONE ASYNC_CLOSING_WAIT_NONE
-#define CY_CLOSING_WAIT_INF ASYNC_CLOSING_WAIT_INF
-
-
-#define CyMAX_CHIPS_PER_CARD 8
-#define CyMAX_CHAR_FIFO 12
-#define CyPORTS_PER_CHIP 4
-#define CD1400_MAX_SPEED 115200
-
-#define CyISA_Ywin 0x2000
-
-#define CyPCI_Ywin 0x4000
-#define CyPCI_Yctl 0x80
-#define CyPCI_Zctl CTRL_WINDOW_SIZE
-#define CyPCI_Zwin 0x80000
-#define CyPCI_Ze_win (2 * CyPCI_Zwin)
-
-#define PCI_DEVICE_ID_MASK 0x06
-
-/**** CD1400 registers ****/
-
-#define CD1400_REV_G 0x46
-#define CD1400_REV_J 0x48
-
-#define CyRegSize 0x0400
-#define Cy_HwReset 0x1400
-#define Cy_ClrIntr 0x1800
-#define Cy_EpldRev 0x1e00
-
-/* Global Registers */
-
-#define CyGFRCR (0x40*2)
-#define CyRevE (44)
-#define CyCAR (0x68*2)
-#define CyCHAN_0 (0x00)
-#define CyCHAN_1 (0x01)
-#define CyCHAN_2 (0x02)
-#define CyCHAN_3 (0x03)
-#define CyGCR (0x4B*2)
-#define CyCH0_SERIAL (0x00)
-#define CyCH0_PARALLEL (0x80)
-#define CySVRR (0x67*2)
-#define CySRModem (0x04)
-#define CySRTransmit (0x02)
-#define CySRReceive (0x01)
-#define CyRICR (0x44*2)
-#define CyTICR (0x45*2)
-#define CyMICR (0x46*2)
-#define CyICR0 (0x00)
-#define CyICR1 (0x01)
-#define CyICR2 (0x02)
-#define CyICR3 (0x03)
-#define CyRIR (0x6B*2)
-#define CyTIR (0x6A*2)
-#define CyMIR (0x69*2)
-#define CyIRDirEq (0x80)
-#define CyIRBusy (0x40)
-#define CyIRUnfair (0x20)
-#define CyIRContext (0x1C)
-#define CyIRChannel (0x03)
-#define CyPPR (0x7E*2)
-#define CyCLOCK_20_1MS (0x27)
-#define CyCLOCK_25_1MS (0x31)
-#define CyCLOCK_25_5MS (0xf4)
-#define CyCLOCK_60_1MS (0x75)
-#define CyCLOCK_60_2MS (0xea)
-
-/* Virtual Registers */
-
-#define CyRIVR (0x43*2)
-#define CyTIVR (0x42*2)
-#define CyMIVR (0x41*2)
-#define CyIVRMask (0x07)
-#define CyIVRRxEx (0x07)
-#define CyIVRRxOK (0x03)
-#define CyIVRTxOK (0x02)
-#define CyIVRMdmOK (0x01)
-#define CyTDR (0x63*2)
-#define CyRDSR (0x62*2)
-#define CyTIMEOUT (0x80)
-#define CySPECHAR (0x70)
-#define CyBREAK (0x08)
-#define CyPARITY (0x04)
-#define CyFRAME (0x02)
-#define CyOVERRUN (0x01)
-#define CyMISR (0x4C*2)
-/* see CyMCOR_ and CyMSVR_ for bits*/
-#define CyEOSRR (0x60*2)
-
-/* Channel Registers */
-
-#define CyLIVR (0x18*2)
-#define CyMscsr (0x01)
-#define CyTdsr (0x02)
-#define CyRgdsr (0x03)
-#define CyRedsr (0x07)
-#define CyCCR (0x05*2)
-/* Format 1 */
-#define CyCHAN_RESET (0x80)
-#define CyCHIP_RESET (0x81)
-#define CyFlushTransFIFO (0x82)
-/* Format 2 */
-#define CyCOR_CHANGE (0x40)
-#define CyCOR1ch (0x02)
-#define CyCOR2ch (0x04)
-#define CyCOR3ch (0x08)
-/* Format 3 */
-#define CySEND_SPEC_1 (0x21)
-#define CySEND_SPEC_2 (0x22)
-#define CySEND_SPEC_3 (0x23)
-#define CySEND_SPEC_4 (0x24)
-/* Format 4 */
-#define CyCHAN_CTL (0x10)
-#define CyDIS_RCVR (0x01)
-#define CyENB_RCVR (0x02)
-#define CyDIS_XMTR (0x04)
-#define CyENB_XMTR (0x08)
-#define CySRER (0x06*2)
-#define CyMdmCh (0x80)
-#define CyRxData (0x10)
-#define CyTxRdy (0x04)
-#define CyTxMpty (0x02)
-#define CyNNDT (0x01)
-#define CyCOR1 (0x08*2)
-#define CyPARITY_NONE (0x00)
-#define CyPARITY_0 (0x20)
-#define CyPARITY_1 (0xA0)
-#define CyPARITY_E (0x40)
-#define CyPARITY_O (0xC0)
-#define Cy_1_STOP (0x00)
-#define Cy_1_5_STOP (0x04)
-#define Cy_2_STOP (0x08)
-#define Cy_5_BITS (0x00)
-#define Cy_6_BITS (0x01)
-#define Cy_7_BITS (0x02)
-#define Cy_8_BITS (0x03)
-#define CyCOR2 (0x09*2)
-#define CyIXM (0x80)
-#define CyTxIBE (0x40)
-#define CyETC (0x20)
-#define CyAUTO_TXFL (0x60)
-#define CyLLM (0x10)
-#define CyRLM (0x08)
-#define CyRtsAO (0x04)
-#define CyCtsAE (0x02)
-#define CyDsrAE (0x01)
-#define CyCOR3 (0x0A*2)
-#define CySPL_CH_DRANGE (0x80) /* special character detect range */
-#define CySPL_CH_DET1 (0x40) /* enable special character detection
- on SCHR4-SCHR3 */
-#define CyFL_CTRL_TRNSP (0x20) /* Flow Control Transparency */
-#define CySPL_CH_DET2 (0x10) /* Enable special character detection
- on SCHR2-SCHR1 */
-#define CyREC_FIFO (0x0F) /* Receive FIFO threshold */
-#define CyCOR4 (0x1E*2)
-#define CyCOR5 (0x1F*2)
-#define CyCCSR (0x0B*2)
-#define CyRxEN (0x80)
-#define CyRxFloff (0x40)
-#define CyRxFlon (0x20)
-#define CyTxEN (0x08)
-#define CyTxFloff (0x04)
-#define CyTxFlon (0x02)
-#define CyRDCR (0x0E*2)
-#define CySCHR1 (0x1A*2)
-#define CySCHR2 (0x1B*2)
-#define CySCHR3 (0x1C*2)
-#define CySCHR4 (0x1D*2)
-#define CySCRL (0x22*2)
-#define CySCRH (0x23*2)
-#define CyLNC (0x24*2)
-#define CyMCOR1 (0x15*2)
-#define CyMCOR2 (0x16*2)
-#define CyRTPR (0x21*2)
-#define CyMSVR1 (0x6C*2)
-#define CyMSVR2 (0x6D*2)
-#define CyANY_DELTA (0xF0)
-#define CyDSR (0x80)
-#define CyCTS (0x40)
-#define CyRI (0x20)
-#define CyDCD (0x10)
-#define CyDTR (0x02)
-#define CyRTS (0x01)
-#define CyPVSR (0x6F*2)
-#define CyRBPR (0x78*2)
-#define CyRCOR (0x7C*2)
-#define CyTBPR (0x72*2)
-#define CyTCOR (0x76*2)
-
-/* Custom Registers */
-
-#define CyPLX_VER (0x3400)
-#define PLX_9050 0x0b
-#define PLX_9060 0x0c
-#define PLX_9080 0x0d
-
-/***************************************************************************/
-
-#endif /* _LINUX_CYCLADES_H */
diff --git a/include/linux/isicom.h b/include/linux/isicom.h
deleted file mode 100644
index 7de6822d7b1a..000000000000
--- a/include/linux/isicom.h
+++ /dev/null
@@ -1,85 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _LINUX_ISICOM_H
-#define _LINUX_ISICOM_H
-
-#define YES 1
-#define NO 0
-
-/*
- * ISICOM Driver definitions ...
- *
- */
-
-#define ISICOM_NAME "ISICom"
-
-/*
- * PCI definitions
- */
-
-#define DEVID_COUNT 9
-#define VENDOR_ID 0x10b5
-
-/*
- * These are now officially allocated numbers
- */
-
-#define ISICOM_NMAJOR 112 /* normal */
-#define ISICOM_CMAJOR 113 /* callout */
-#define ISICOM_MAGIC (('M' << 8) | 'T')
-
-#define WAKEUP_CHARS 256 /* hard coded for now */
-#define TX_SIZE 254
-
-#define BOARD_COUNT 4
-#define PORT_COUNT (BOARD_COUNT*16)
-
-/* character sizes */
-
-#define ISICOM_CS5 0x0000
-#define ISICOM_CS6 0x0001
-#define ISICOM_CS7 0x0002
-#define ISICOM_CS8 0x0003
-
-/* stop bits */
-
-#define ISICOM_1SB 0x0000
-#define ISICOM_2SB 0x0004
-
-/* parity */
-
-#define ISICOM_NOPAR 0x0000
-#define ISICOM_ODPAR 0x0008
-#define ISICOM_EVPAR 0x0018
-
-/* flow control */
-
-#define ISICOM_CTSRTS 0x03
-#define ISICOM_INITIATE_XONXOFF 0x04
-#define ISICOM_RESPOND_XONXOFF 0x08
-
-#define BOARD(line) (((line) >> 4) & 0x3)
-
- /* isi kill queue bitmap */
-
-#define ISICOM_KILLTX 0x01
-#define ISICOM_KILLRX 0x02
-
- /* isi_board status bitmap */
-
-#define FIRMWARE_LOADED 0x0001
-#define BOARD_ACTIVE 0x0002
-#define BOARD_INIT 0x0004
-
- /* isi_port status bitmap */
-
-#define ISI_CTS 0x1000
-#define ISI_DSR 0x2000
-#define ISI_RI 0x4000
-#define ISI_DCD 0x8000
-#define ISI_DTR 0x0100
-#define ISI_RTS 0x0200
-
-
-#define ISI_TXOK 0x0001
-
-#endif /* ISICOM_H */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index a76ccb697bef..4c3fa5293d76 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1688,37 +1688,8 @@
#define PCI_VENDOR_ID_MICROSEMI 0x11f8
#define PCI_VENDOR_ID_RP 0x11fe
-#define PCI_DEVICE_ID_RP32INTF 0x0001
-#define PCI_DEVICE_ID_RP8INTF 0x0002
-#define PCI_DEVICE_ID_RP16INTF 0x0003
-#define PCI_DEVICE_ID_RP4QUAD 0x0004
-#define PCI_DEVICE_ID_RP8OCTA 0x0005
-#define PCI_DEVICE_ID_RP8J 0x0006
-#define PCI_DEVICE_ID_RP4J 0x0007
-#define PCI_DEVICE_ID_RP8SNI 0x0008
-#define PCI_DEVICE_ID_RP16SNI 0x0009
-#define PCI_DEVICE_ID_RPP4 0x000A
-#define PCI_DEVICE_ID_RPP8 0x000B
-#define PCI_DEVICE_ID_RP4M 0x000D
-#define PCI_DEVICE_ID_RP2_232 0x000E
-#define PCI_DEVICE_ID_RP2_422 0x000F
-#define PCI_DEVICE_ID_URP32INTF 0x0801
-#define PCI_DEVICE_ID_URP8INTF 0x0802
-#define PCI_DEVICE_ID_URP16INTF 0x0803
-#define PCI_DEVICE_ID_URP8OCTA 0x0805
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C
-#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D
-#define PCI_DEVICE_ID_CRP16INTF 0x0903
#define PCI_VENDOR_ID_CYCLADES 0x120e
-#define PCI_DEVICE_ID_CYCLOM_Y_Lo 0x0100
-#define PCI_DEVICE_ID_CYCLOM_Y_Hi 0x0101
-#define PCI_DEVICE_ID_CYCLOM_4Y_Lo 0x0102
-#define PCI_DEVICE_ID_CYCLOM_4Y_Hi 0x0103
-#define PCI_DEVICE_ID_CYCLOM_8Y_Lo 0x0104
-#define PCI_DEVICE_ID_CYCLOM_8Y_Hi 0x0105
-#define PCI_DEVICE_ID_CYCLOM_Z_Lo 0x0200
-#define PCI_DEVICE_ID_CYCLOM_Z_Hi 0x0201
#define PCI_DEVICE_ID_PC300_RX_2 0x0300
#define PCI_DEVICE_ID_PC300_RX_1 0x0301
#define PCI_DEVICE_ID_PC300_TE_2 0x0310
@@ -2065,8 +2036,6 @@
#define PCI_DEVICE_ID_EXAR_XR17V358 0x0358
#define PCI_VENDOR_ID_MICROGATE 0x13c0
-#define PCI_DEVICE_ID_MICROGATE_USC 0x0010
-#define PCI_DEVICE_ID_MICROGATE_SCA 0x0030
#define PCI_VENDOR_ID_3WARE 0x13C1
#define PCI_DEVICE_ID_3WARE_1000 0x1000
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index e1b684e33841..d7ed00f1594e 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -500,19 +500,19 @@ static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int c
return 0;
}
-static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+static inline void uart_unlock_and_check_sysrq(struct uart_port *port)
{
int sysrq_ch;
if (!port->has_sysrq) {
- spin_unlock_irqrestore(&port->lock, irqflags);
+ spin_unlock(&port->lock);
return;
}
sysrq_ch = port->sysrq_ch;
port->sysrq_ch = 0;
- spin_unlock_irqrestore(&port->lock, irqflags);
+ spin_unlock(&port->lock);
if (sysrq_ch)
handle_sysrq(sysrq_ch);
@@ -526,9 +526,9 @@ static inline int uart_prepare_sysrq_char(struct uart_port *port, unsigned int c
{
return 0;
}
-static inline void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long irqflags)
+static inline void uart_unlock_and_check_sysrq(struct uart_port *port)
{
- spin_unlock_irqrestore(&port->lock, irqflags);
+ spin_unlock(&port->lock);
}
#endif /* CONFIG_MAGIC_SYSRQ_SERIAL */
diff --git a/include/linux/serial_s3c.h b/include/linux/serial_s3c.h
index ca2c5393dc6b..f6c3323fc4c5 100644
--- a/include/linux/serial_s3c.h
+++ b/include/linux/serial_s3c.h
@@ -246,6 +246,22 @@
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
+#define APPLE_S5L_UCON_RXTO_ENA 9
+#define APPLE_S5L_UCON_RXTHRESH_ENA 12
+#define APPLE_S5L_UCON_TXTHRESH_ENA 13
+#define APPLE_S5L_UCON_RXTO_ENA_MSK (1 << APPLE_S5L_UCON_RXTO_ENA)
+#define APPLE_S5L_UCON_RXTHRESH_ENA_MSK (1 << APPLE_S5L_UCON_RXTHRESH_ENA)
+#define APPLE_S5L_UCON_TXTHRESH_ENA_MSK (1 << APPLE_S5L_UCON_TXTHRESH_ENA)
+
+#define APPLE_S5L_UCON_DEFAULT (S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI)
+
+#define APPLE_S5L_UTRSTAT_RXTHRESH (1<<4)
+#define APPLE_S5L_UTRSTAT_TXTHRESH (1<<5)
+#define APPLE_S5L_UTRSTAT_RXTO (1<<9)
+#define APPLE_S5L_UTRSTAT_ALL_FLAGS (0x3f0)
+
#ifndef __ASSEMBLY__
#include <linux/serial_core.h>
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 95fc2f100f12..e5d6b1f28823 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -17,30 +17,6 @@
/*
- * Lock subclasses for tty locks
- *
- * TTY_LOCK_NORMAL is for normal ttys and master ptys.
- * TTY_LOCK_SLAVE is for slave ptys only.
- *
- * Lock subclasses are necessary for handling nested locking with pty pairs.
- * tty locks which use nested locking:
- *
- * legacy_mutex - Nested tty locks are necessary for releasing pty pairs.
- * The stable lock order is master pty first, then slave pty.
- * termios_rwsem - The stable lock order is tty_buffer lock->termios_rwsem.
- * Subclassing this lock enables the slave pty to hold its
- * termios_rwsem when claiming the master tty_buffer lock.
- * tty_buffer lock - slave ptys can claim nested buffer lock when handling
- * signal chars. The stable lock order is slave pty, then
- * master.
- */
-
-enum {
- TTY_LOCK_NORMAL = 0,
- TTY_LOCK_SLAVE,
-};
-
-/*
* (Note: the *_driver.minor_start values 1, 64, 128, 192 are
* hardcoded at present.)
*/
@@ -284,7 +260,7 @@ struct tty_operations;
struct tty_struct {
int magic;
struct kref kref;
- struct device *dev;
+ struct device *dev; /* class device or NULL (e.g. ptys, serdev) */
struct tty_driver *driver;
const struct tty_operations *ops;
int index;
@@ -373,21 +349,6 @@ struct tty_file_private {
#define TTY_LDISC_CHANGING 20 /* Change pending - non-block IO */
#define TTY_LDISC_HALTED 22 /* Line discipline is halted */
-/* Values for tty->flow_change */
-#define TTY_THROTTLE_SAFE 1
-#define TTY_UNTHROTTLE_SAFE 2
-
-static inline void __tty_set_flow_change(struct tty_struct *tty, int val)
-{
- tty->flow_change = val;
-}
-
-static inline void tty_set_flow_change(struct tty_struct *tty, int val)
-{
- tty->flow_change = val;
- smp_mb();
-}
-
static inline bool tty_io_nonblock(struct tty_struct *tty, struct file *file)
{
return file->f_flags & O_NONBLOCK ||
@@ -419,10 +380,6 @@ extern struct tty_struct *tty_kopen_exclusive(dev_t device);
extern struct tty_struct *tty_kopen_shared(dev_t device);
extern void tty_kclose(struct tty_struct *tty);
extern int tty_dev_name_to_number(const char *name, dev_t *number);
-extern int tty_ldisc_lock(struct tty_struct *tty, unsigned long timeout);
-extern void tty_ldisc_unlock(struct tty_struct *tty);
-extern ssize_t redirected_tty_write(struct kiocb *, struct iov_iter *);
-extern struct file *tty_release_redirect(struct tty_struct *tty);
#else
static inline void tty_kref_put(struct tty_struct *tty)
{ }
@@ -475,14 +432,10 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty)
extern const char *tty_driver_name(const struct tty_struct *tty);
extern void tty_wait_until_sent(struct tty_struct *tty, long timeout);
-extern int __tty_check_change(struct tty_struct *tty, int sig);
-extern int tty_check_change(struct tty_struct *tty);
-extern void __stop_tty(struct tty_struct *tty);
extern void stop_tty(struct tty_struct *tty);
-extern void __start_tty(struct tty_struct *tty);
extern void start_tty(struct tty_struct *tty);
extern int tty_register_driver(struct tty_driver *driver);
-extern int tty_unregister_driver(struct tty_driver *driver);
+extern void tty_unregister_driver(struct tty_driver *driver);
extern struct device *tty_register_device(struct tty_driver *driver,
unsigned index, struct device *dev);
extern struct device *tty_register_device_attr(struct tty_driver *driver,
@@ -506,23 +459,11 @@ extern int tty_get_icount(struct tty_struct *tty,
extern int is_current_pgrp_orphaned(void);
extern void tty_hangup(struct tty_struct *tty);
extern void tty_vhangup(struct tty_struct *tty);
-extern void tty_vhangup_session(struct tty_struct *tty);
extern int tty_hung_up_p(struct file *filp);
extern void do_SAK(struct tty_struct *tty);
extern void __do_SAK(struct tty_struct *tty);
-extern void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty);
-extern int tty_signal_session_leader(struct tty_struct *tty, int exit_session);
-extern void session_clear_tty(struct pid *session);
extern void no_tty(void);
-extern void tty_buffer_free_all(struct tty_port *port);
-extern void tty_buffer_flush(struct tty_struct *tty, struct tty_ldisc *ld);
-extern void tty_buffer_init(struct tty_port *port);
-extern void tty_buffer_set_lock_subclass(struct tty_port *port);
-extern bool tty_buffer_restart_work(struct tty_port *port);
-extern bool tty_buffer_cancel_work(struct tty_port *port);
-extern void tty_buffer_flush_work(struct tty_port *port);
extern speed_t tty_termios_baud_rate(struct ktermios *termios);
-extern speed_t tty_termios_input_baud_rate(struct ktermios *termios);
extern void tty_termios_encode_baud_rate(struct ktermios *termios,
speed_t ibaud, speed_t obaud);
extern void tty_encode_baud_rate(struct tty_struct *tty,
@@ -550,27 +491,16 @@ extern int tty_set_termios(struct tty_struct *tty, struct ktermios *kt);
extern struct tty_ldisc *tty_ldisc_ref(struct tty_struct *);
extern void tty_ldisc_deref(struct tty_ldisc *);
extern struct tty_ldisc *tty_ldisc_ref_wait(struct tty_struct *);
-extern void tty_ldisc_hangup(struct tty_struct *tty, bool reset);
-extern int tty_ldisc_reinit(struct tty_struct *tty, int disc);
extern const struct seq_operations tty_ldiscs_seq_ops;
extern void tty_wakeup(struct tty_struct *tty);
extern void tty_ldisc_flush(struct tty_struct *tty);
-extern long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg);
-extern long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty,
- struct file *file, unsigned int cmd, unsigned long arg);
extern int tty_perform_flush(struct tty_struct *tty, unsigned long arg);
-extern void tty_default_fops(struct file_operations *fops);
-extern struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx);
-extern int tty_alloc_file(struct file *file);
-extern void tty_add_file(struct tty_struct *tty, struct file *file);
-extern void tty_free_file(struct file *file);
extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx);
extern void tty_release_struct(struct tty_struct *tty, int idx);
-extern int tty_release(struct inode *inode, struct file *filp);
extern void tty_init_termios(struct tty_struct *tty);
extern void tty_save_termios(struct tty_struct *tty);
extern int tty_standard_install(struct tty_driver *driver,
@@ -578,8 +508,6 @@ extern int tty_standard_install(struct tty_driver *driver,
extern struct mutex tty_mutex;
-#define tty_is_writelocked(tty) (mutex_is_locked(&tty->atomic_write_lock))
-
extern void tty_port_init(struct tty_port *port);
extern void tty_port_link_device(struct tty_port *port,
struct tty_driver *driver, unsigned index);
@@ -699,13 +627,8 @@ static inline int tty_port_users(struct tty_port *port)
extern int tty_register_ldisc(int disc, struct tty_ldisc_ops *new_ldisc);
extern int tty_unregister_ldisc(int disc);
extern int tty_set_ldisc(struct tty_struct *tty, int disc);
-extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty);
-extern void tty_ldisc_release(struct tty_struct *tty);
-extern int __must_check tty_ldisc_init(struct tty_struct *tty);
-extern void tty_ldisc_deinit(struct tty_struct *tty);
extern int tty_ldisc_receive_buf(struct tty_ldisc *ld, const unsigned char *p,
char *f, int count);
-extern void tty_sysctl_init(void);
/* n_tty.c */
extern void n_tty_inherit_ops(struct tty_ldisc_ops *ops);
@@ -717,20 +640,10 @@ static inline void n_tty_init(void) { }
/* tty_audit.c */
#ifdef CONFIG_AUDIT
-extern void tty_audit_add_data(struct tty_struct *tty, const void *data,
- size_t size);
extern void tty_audit_exit(void);
extern void tty_audit_fork(struct signal_struct *sig);
-extern void tty_audit_tiocsti(struct tty_struct *tty, char ch);
extern int tty_audit_push(void);
#else
-static inline void tty_audit_add_data(struct tty_struct *tty, const void *data,
- size_t size)
-{
-}
-static inline void tty_audit_tiocsti(struct tty_struct *tty, char ch)
-{
-}
static inline void tty_audit_exit(void)
{
}
@@ -772,16 +685,4 @@ static inline void proc_tty_register_driver(struct tty_driver *d) {}
static inline void proc_tty_unregister_driver(struct tty_driver *d) {}
#endif
-#define tty_msg(fn, tty, f, ...) \
- fn("%s %s: " f, tty_driver_name(tty), tty_name(tty), ##__VA_ARGS__)
-
-#define tty_debug(tty, f, ...) tty_msg(pr_debug, tty, f, ##__VA_ARGS__)
-#define tty_info(tty, f, ...) tty_msg(pr_info, tty, f, ##__VA_ARGS__)
-#define tty_notice(tty, f, ...) tty_msg(pr_notice, tty, f, ##__VA_ARGS__)
-#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__)
-#define tty_err(tty, f, ...) tty_msg(pr_err, tty, f, ##__VA_ARGS__)
-
-#define tty_info_ratelimited(tty, f, ...) \
- tty_msg(pr_info_ratelimited, tty, f, ##__VA_ARGS__)
-
#endif
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 61c3372d3f32..2f719b471d52 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -228,7 +228,7 @@
*
* Called when the device receives a TIOCGICOUNT ioctl. Passed a kernel
* structure to complete. This method is optional and will only be called
- * if provided (otherwise EINVAL will be returned).
+ * if provided (otherwise ENOTTY will be returned).
*/
#include <linux/export.h>
diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h
index 572a07976116..31284b55bd4f 100644
--- a/include/linux/tty_ldisc.h
+++ b/include/linux/tty_ldisc.h
@@ -173,7 +173,6 @@ extern int ldsem_down_write_nested(struct ld_semaphore *sem, int subclass,
struct tty_ldisc_ops {
- int magic;
char *name;
int num;
int flags;
@@ -218,8 +217,6 @@ struct tty_ldisc {
struct tty_struct *tty;
};
-#define TTY_LDISC_MAGIC 0x5403
-
#define LDISC_FLAG_DEFINED 0x00000001
#define MODULE_ALIAS_LDISC(ldisc) \
diff --git a/include/net/nfc/nci_core.h b/include/net/nfc/nci_core.h
index 43c9c5d2bedb..bd76e8e082c0 100644
--- a/include/net/nfc/nci_core.h
+++ b/include/net/nfc/nci_core.h
@@ -430,8 +430,6 @@ struct nci_uart_ops {
int (*open)(struct nci_uart *nci_uart);
void (*close)(struct nci_uart *nci_uart);
int (*recv)(struct nci_uart *nci_uart, struct sk_buff *skb);
- int (*recv_buf)(struct nci_uart *nci_uart, const u8 *data, char *flags,
- int count);
int (*send)(struct nci_uart *nci_uart, struct sk_buff *skb);
void (*tx_start)(struct nci_uart *nci_uart);
void (*tx_done)(struct nci_uart *nci_uart);
diff --git a/include/uapi/linux/cyclades.h b/include/uapi/linux/cyclades.h
deleted file mode 100644
index fc0add2194a9..000000000000
--- a/include/uapi/linux/cyclades.h
+++ /dev/null
@@ -1,494 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-/* $Revision: 3.0 $$Date: 1998/11/02 14:20:59 $
- * linux/include/linux/cyclades.h
- *
- * This file was initially written by
- * Randolph Bentson <bentson@grieg.seaslug.org> and is maintained by
- * Ivan Passos <ivan@cyclades.com>.
- *
- * This file contains the general definitions for the cyclades.c driver
- *$Log: cyclades.h,v $
- *Revision 3.1 2002/01/29 11:36:16 henrique
- *added throttle field on struct cyclades_port to indicate whether the
- *port is throttled or not
- *
- *Revision 3.1 2000/04/19 18:52:52 ivan
- *converted address fields to unsigned long and added fields for physical
- *addresses on cyclades_card structure;
- *
- *Revision 3.0 1998/11/02 14:20:59 ivan
- *added nports field on cyclades_card structure;
- *
- *Revision 2.5 1998/08/03 16:57:01 ivan
- *added cyclades_idle_stats structure;
- *
- *Revision 2.4 1998/06/01 12:09:53 ivan
- *removed closing_wait2 from cyclades_port structure;
- *
- *Revision 2.3 1998/03/16 18:01:12 ivan
- *changes in the cyclades_port structure to get it closer to the
- *standard serial port structure;
- *added constants for new ioctls;
- *
- *Revision 2.2 1998/02/17 16:50:00 ivan
- *changes in the cyclades_port structure (addition of shutdown_wait and
- *chip_rev variables);
- *added constants for new ioctls and for CD1400 rev. numbers.
- *
- *Revision 2.1 1997/10/24 16:03:00 ivan
- *added rflow (which allows enabling the CD1400 special flow control
- *feature) and rtsdtr_inv (which allows DTR/RTS pin inversion) to
- *cyclades_port structure;
- *added Alpha support
- *
- *Revision 2.0 1997/06/30 10:30:00 ivan
- *added some new doorbell command constants related to IOCTLW and
- *UART error signaling
- *
- *Revision 1.8 1997/06/03 15:30:00 ivan
- *added constant ZFIRM_HLT
- *added constant CyPCI_Ze_win ( = 2 * Cy_PCI_Zwin)
- *
- *Revision 1.7 1997/03/26 10:30:00 daniel
- *new entries at the end of cyclades_port struct to reallocate
- *variables illegally allocated within card memory.
- *
- *Revision 1.6 1996/09/09 18:35:30 bentson
- *fold in changes for Cyclom-Z -- including structures for
- *communicating with board as well modest changes to original
- *structures to support new features.
- *
- *Revision 1.5 1995/11/13 21:13:31 bentson
- *changes suggested by Michael Chastain <mec@duracef.shout.net>
- *to support use of this file in non-kernel applications
- *
- *
- */
-
-#ifndef _UAPI_LINUX_CYCLADES_H
-#define _UAPI_LINUX_CYCLADES_H
-
-#include <linux/types.h>
-
-struct cyclades_monitor {
- unsigned long int_count;
- unsigned long char_count;
- unsigned long char_max;
- unsigned long char_last;
-};
-
-/*
- * These stats all reflect activity since the device was last initialized.
- * (i.e., since the port was opened with no other processes already having it
- * open)
- */
-struct cyclades_idle_stats {
- __kernel_old_time_t in_use; /* Time device has been in use (secs) */
- __kernel_old_time_t recv_idle; /* Time since last char received (secs) */
- __kernel_old_time_t xmit_idle; /* Time since last char transmitted (secs) */
- unsigned long recv_bytes; /* Bytes received */
- unsigned long xmit_bytes; /* Bytes transmitted */
- unsigned long overruns; /* Input overruns */
- unsigned long frame_errs; /* Input framing errors */
- unsigned long parity_errs; /* Input parity errors */
-};
-
-#define CYCLADES_MAGIC 0x4359
-
-#define CYGETMON 0x435901
-#define CYGETTHRESH 0x435902
-#define CYSETTHRESH 0x435903
-#define CYGETDEFTHRESH 0x435904
-#define CYSETDEFTHRESH 0x435905
-#define CYGETTIMEOUT 0x435906
-#define CYSETTIMEOUT 0x435907
-#define CYGETDEFTIMEOUT 0x435908
-#define CYSETDEFTIMEOUT 0x435909
-#define CYSETRFLOW 0x43590a
-#define CYGETRFLOW 0x43590b
-#define CYSETRTSDTR_INV 0x43590c
-#define CYGETRTSDTR_INV 0x43590d
-#define CYZSETPOLLCYCLE 0x43590e
-#define CYZGETPOLLCYCLE 0x43590f
-#define CYGETCD1400VER 0x435910
-#define CYSETWAIT 0x435912
-#define CYGETWAIT 0x435913
-
-/*************** CYCLOM-Z ADDITIONS ***************/
-
-#define CZIOC ('M' << 8)
-#define CZ_NBOARDS (CZIOC|0xfa)
-#define CZ_BOOT_START (CZIOC|0xfb)
-#define CZ_BOOT_DATA (CZIOC|0xfc)
-#define CZ_BOOT_END (CZIOC|0xfd)
-#define CZ_TEST (CZIOC|0xfe)
-
-#define CZ_DEF_POLL (HZ/25)
-
-#define MAX_BOARD 4 /* Max number of boards */
-#define MAX_DEV 256 /* Max number of ports total */
-#define CYZ_MAX_SPEED 921600
-
-#define CYZ_FIFO_SIZE 16
-
-#define CYZ_BOOT_NWORDS 0x100
-struct CYZ_BOOT_CTRL {
- unsigned short nboard;
- int status[MAX_BOARD];
- int nchannel[MAX_BOARD];
- int fw_rev[MAX_BOARD];
- unsigned long offset;
- unsigned long data[CYZ_BOOT_NWORDS];
-};
-
-
-#ifndef DP_WINDOW_SIZE
-/*
- * Memory Window Sizes
- */
-
-#define DP_WINDOW_SIZE (0x00080000) /* window size 512 Kb */
-#define ZE_DP_WINDOW_SIZE (0x00100000) /* window size 1 Mb (Ze and
- 8Zo V.2 */
-#define CTRL_WINDOW_SIZE (0x00000080) /* runtime regs 128 bytes */
-
-/*
- * CUSTOM_REG - Cyclom-Z/PCI Custom Registers Set. The driver
- * normally will access only interested on the fpga_id, fpga_version,
- * start_cpu and stop_cpu.
- */
-
-struct CUSTOM_REG {
- __u32 fpga_id; /* FPGA Identification Register */
- __u32 fpga_version; /* FPGA Version Number Register */
- __u32 cpu_start; /* CPU start Register (write) */
- __u32 cpu_stop; /* CPU stop Register (write) */
- __u32 misc_reg; /* Miscellaneous Register */
- __u32 idt_mode; /* IDT mode Register */
- __u32 uart_irq_status; /* UART IRQ status Register */
- __u32 clear_timer0_irq; /* Clear timer interrupt Register */
- __u32 clear_timer1_irq; /* Clear timer interrupt Register */
- __u32 clear_timer2_irq; /* Clear timer interrupt Register */
- __u32 test_register; /* Test Register */
- __u32 test_count; /* Test Count Register */
- __u32 timer_select; /* Timer select register */
- __u32 pr_uart_irq_status; /* Prioritized UART IRQ stat Reg */
- __u32 ram_wait_state; /* RAM wait-state Register */
- __u32 uart_wait_state; /* UART wait-state Register */
- __u32 timer_wait_state; /* timer wait-state Register */
- __u32 ack_wait_state; /* ACK wait State Register */
-};
-
-/*
- * RUNTIME_9060 - PLX PCI9060ES local configuration and shared runtime
- * registers. This structure can be used to access the 9060 registers
- * (memory mapped).
- */
-
-struct RUNTIME_9060 {
- __u32 loc_addr_range; /* 00h - Local Address Range */
- __u32 loc_addr_base; /* 04h - Local Address Base */
- __u32 loc_arbitr; /* 08h - Local Arbitration */
- __u32 endian_descr; /* 0Ch - Big/Little Endian Descriptor */
- __u32 loc_rom_range; /* 10h - Local ROM Range */
- __u32 loc_rom_base; /* 14h - Local ROM Base */
- __u32 loc_bus_descr; /* 18h - Local Bus descriptor */
- __u32 loc_range_mst; /* 1Ch - Local Range for Master to PCI */
- __u32 loc_base_mst; /* 20h - Local Base for Master PCI */
- __u32 loc_range_io; /* 24h - Local Range for Master IO */
- __u32 pci_base_mst; /* 28h - PCI Base for Master PCI */
- __u32 pci_conf_io; /* 2Ch - PCI configuration for Master IO */
- __u32 filler1; /* 30h */
- __u32 filler2; /* 34h */
- __u32 filler3; /* 38h */
- __u32 filler4; /* 3Ch */
- __u32 mail_box_0; /* 40h - Mail Box 0 */
- __u32 mail_box_1; /* 44h - Mail Box 1 */
- __u32 mail_box_2; /* 48h - Mail Box 2 */
- __u32 mail_box_3; /* 4Ch - Mail Box 3 */
- __u32 filler5; /* 50h */
- __u32 filler6; /* 54h */
- __u32 filler7; /* 58h */
- __u32 filler8; /* 5Ch */
- __u32 pci_doorbell; /* 60h - PCI to Local Doorbell */
- __u32 loc_doorbell; /* 64h - Local to PCI Doorbell */
- __u32 intr_ctrl_stat; /* 68h - Interrupt Control/Status */
- __u32 init_ctrl; /* 6Ch - EEPROM control, Init Control, etc */
-};
-
-/* Values for the Local Base Address re-map register */
-
-#define WIN_RAM 0x00000001L /* set the sliding window to RAM */
-#define WIN_CREG 0x14000001L /* set the window to custom Registers */
-
-/* Values timer select registers */
-
-#define TIMER_BY_1M 0x00 /* clock divided by 1M */
-#define TIMER_BY_256K 0x01 /* clock divided by 256k */
-#define TIMER_BY_128K 0x02 /* clock divided by 128k */
-#define TIMER_BY_32K 0x03 /* clock divided by 32k */
-
-/****************** ****************** *******************/
-#endif
-
-#ifndef ZFIRM_ID
-/* #include "zfwint.h" */
-/****************** ****************** *******************/
-/*
- * This file contains the definitions for interfacing with the
- * Cyclom-Z ZFIRM Firmware.
- */
-
-/* General Constant definitions */
-
-#define MAX_CHAN 64 /* max number of channels per board */
-
-/* firmware id structure (set after boot) */
-
-#define ID_ADDRESS 0x00000180L /* signature/pointer address */
-#define ZFIRM_ID 0x5557465AL /* ZFIRM/U signature */
-#define ZFIRM_HLT 0x59505B5CL /* ZFIRM needs external power supply */
-#define ZFIRM_RST 0x56040674L /* RST signal (due to FW reset) */
-
-#define ZF_TINACT_DEF 1000 /* default inactivity timeout
- (1000 ms) */
-#define ZF_TINACT ZF_TINACT_DEF
-
-struct FIRM_ID {
- __u32 signature; /* ZFIRM/U signature */
- __u32 zfwctrl_addr; /* pointer to ZFW_CTRL structure */
-};
-
-/* Op. System id */
-
-#define C_OS_LINUX 0x00000030 /* generic Linux system */
-
-/* channel op_mode */
-
-#define C_CH_DISABLE 0x00000000 /* channel is disabled */
-#define C_CH_TXENABLE 0x00000001 /* channel Tx enabled */
-#define C_CH_RXENABLE 0x00000002 /* channel Rx enabled */
-#define C_CH_ENABLE 0x00000003 /* channel Tx/Rx enabled */
-#define C_CH_LOOPBACK 0x00000004 /* Loopback mode */
-
-/* comm_parity - parity */
-
-#define C_PR_NONE 0x00000000 /* None */
-#define C_PR_ODD 0x00000001 /* Odd */
-#define C_PR_EVEN 0x00000002 /* Even */
-#define C_PR_MARK 0x00000004 /* Mark */
-#define C_PR_SPACE 0x00000008 /* Space */
-#define C_PR_PARITY 0x000000ff
-
-#define C_PR_DISCARD 0x00000100 /* discard char with frame/par error */
-#define C_PR_IGNORE 0x00000200 /* ignore frame/par error */
-
-/* comm_data_l - data length and stop bits */
-
-#define C_DL_CS5 0x00000001
-#define C_DL_CS6 0x00000002
-#define C_DL_CS7 0x00000004
-#define C_DL_CS8 0x00000008
-#define C_DL_CS 0x0000000f
-#define C_DL_1STOP 0x00000010
-#define C_DL_15STOP 0x00000020
-#define C_DL_2STOP 0x00000040
-#define C_DL_STOP 0x000000f0
-
-/* interrupt enabling/status */
-
-#define C_IN_DISABLE 0x00000000 /* zero, disable interrupts */
-#define C_IN_TXBEMPTY 0x00000001 /* tx buffer empty */
-#define C_IN_TXLOWWM 0x00000002 /* tx buffer below LWM */
-#define C_IN_RXHIWM 0x00000010 /* rx buffer above HWM */
-#define C_IN_RXNNDT 0x00000020 /* rx no new data timeout */
-#define C_IN_MDCD 0x00000100 /* modem DCD change */
-#define C_IN_MDSR 0x00000200 /* modem DSR change */
-#define C_IN_MRI 0x00000400 /* modem RI change */
-#define C_IN_MCTS 0x00000800 /* modem CTS change */
-#define C_IN_RXBRK 0x00001000 /* Break received */
-#define C_IN_PR_ERROR 0x00002000 /* parity error */
-#define C_IN_FR_ERROR 0x00004000 /* frame error */
-#define C_IN_OVR_ERROR 0x00008000 /* overrun error */
-#define C_IN_RXOFL 0x00010000 /* RX buffer overflow */
-#define C_IN_IOCTLW 0x00020000 /* I/O control w/ wait */
-#define C_IN_MRTS 0x00040000 /* modem RTS drop */
-#define C_IN_ICHAR 0x00080000
-
-/* flow control */
-
-#define C_FL_OXX 0x00000001 /* output Xon/Xoff flow control */
-#define C_FL_IXX 0x00000002 /* output Xon/Xoff flow control */
-#define C_FL_OIXANY 0x00000004 /* output Xon/Xoff (any xon) */
-#define C_FL_SWFLOW 0x0000000f
-
-/* flow status */
-
-#define C_FS_TXIDLE 0x00000000 /* no Tx data in the buffer or UART */
-#define C_FS_SENDING 0x00000001 /* UART is sending data */
-#define C_FS_SWFLOW 0x00000002 /* Tx is stopped by received Xoff */
-
-/* rs_control/rs_status RS-232 signals */
-
-#define C_RS_PARAM 0x80000000 /* Indicates presence of parameter in
- IOCTLM command */
-#define C_RS_RTS 0x00000001 /* RTS */
-#define C_RS_DTR 0x00000004 /* DTR */
-#define C_RS_DCD 0x00000100 /* CD */
-#define C_RS_DSR 0x00000200 /* DSR */
-#define C_RS_RI 0x00000400 /* RI */
-#define C_RS_CTS 0x00000800 /* CTS */
-
-/* commands Host <-> Board */
-
-#define C_CM_RESET 0x01 /* reset/flush buffers */
-#define C_CM_IOCTL 0x02 /* re-read CH_CTRL */
-#define C_CM_IOCTLW 0x03 /* re-read CH_CTRL, intr when done */
-#define C_CM_IOCTLM 0x04 /* RS-232 outputs change */
-#define C_CM_SENDXOFF 0x10 /* send Xoff */
-#define C_CM_SENDXON 0x11 /* send Xon */
-#define C_CM_CLFLOW 0x12 /* Clear flow control (resume) */
-#define C_CM_SENDBRK 0x41 /* send break */
-#define C_CM_INTBACK 0x42 /* Interrupt back */
-#define C_CM_SET_BREAK 0x43 /* Tx break on */
-#define C_CM_CLR_BREAK 0x44 /* Tx break off */
-#define C_CM_CMD_DONE 0x45 /* Previous command done */
-#define C_CM_INTBACK2 0x46 /* Alternate Interrupt back */
-#define C_CM_TINACT 0x51 /* set inactivity detection */
-#define C_CM_IRQ_ENBL 0x52 /* enable generation of interrupts */
-#define C_CM_IRQ_DSBL 0x53 /* disable generation of interrupts */
-#define C_CM_ACK_ENBL 0x54 /* enable acknowledged interrupt mode */
-#define C_CM_ACK_DSBL 0x55 /* disable acknowledged intr mode */
-#define C_CM_FLUSH_RX 0x56 /* flushes Rx buffer */
-#define C_CM_FLUSH_TX 0x57 /* flushes Tx buffer */
-#define C_CM_Q_ENABLE 0x58 /* enables queue access from the
- driver */
-#define C_CM_Q_DISABLE 0x59 /* disables queue access from the
- driver */
-
-#define C_CM_TXBEMPTY 0x60 /* Tx buffer is empty */
-#define C_CM_TXLOWWM 0x61 /* Tx buffer low water mark */
-#define C_CM_RXHIWM 0x62 /* Rx buffer high water mark */
-#define C_CM_RXNNDT 0x63 /* rx no new data timeout */
-#define C_CM_TXFEMPTY 0x64
-#define C_CM_ICHAR 0x65
-#define C_CM_MDCD 0x70 /* modem DCD change */
-#define C_CM_MDSR 0x71 /* modem DSR change */
-#define C_CM_MRI 0x72 /* modem RI change */
-#define C_CM_MCTS 0x73 /* modem CTS change */
-#define C_CM_MRTS 0x74 /* modem RTS drop */
-#define C_CM_RXBRK 0x84 /* Break received */
-#define C_CM_PR_ERROR 0x85 /* Parity error */
-#define C_CM_FR_ERROR 0x86 /* Frame error */
-#define C_CM_OVR_ERROR 0x87 /* Overrun error */
-#define C_CM_RXOFL 0x88 /* RX buffer overflow */
-#define C_CM_CMDERROR 0x90 /* command error */
-#define C_CM_FATAL 0x91 /* fatal error */
-#define C_CM_HW_RESET 0x92 /* reset board */
-
-/*
- * CH_CTRL - This per port structure contains all parameters
- * that control an specific port. It can be seen as the
- * configuration registers of a "super-serial-controller".
- */
-
-struct CH_CTRL {
- __u32 op_mode; /* operation mode */
- __u32 intr_enable; /* interrupt masking */
- __u32 sw_flow; /* SW flow control */
- __u32 flow_status; /* output flow status */
- __u32 comm_baud; /* baud rate - numerically specified */
- __u32 comm_parity; /* parity */
- __u32 comm_data_l; /* data length/stop */
- __u32 comm_flags; /* other flags */
- __u32 hw_flow; /* HW flow control */
- __u32 rs_control; /* RS-232 outputs */
- __u32 rs_status; /* RS-232 inputs */
- __u32 flow_xon; /* xon char */
- __u32 flow_xoff; /* xoff char */
- __u32 hw_overflow; /* hw overflow counter */
- __u32 sw_overflow; /* sw overflow counter */
- __u32 comm_error; /* frame/parity error counter */
- __u32 ichar;
- __u32 filler[7];
-};
-
-
-/*
- * BUF_CTRL - This per channel structure contains
- * all Tx and Rx buffer control for a given channel.
- */
-
-struct BUF_CTRL {
- __u32 flag_dma; /* buffers are in Host memory */
- __u32 tx_bufaddr; /* address of the tx buffer */
- __u32 tx_bufsize; /* tx buffer size */
- __u32 tx_threshold; /* tx low water mark */
- __u32 tx_get; /* tail index tx buf */
- __u32 tx_put; /* head index tx buf */
- __u32 rx_bufaddr; /* address of the rx buffer */
- __u32 rx_bufsize; /* rx buffer size */
- __u32 rx_threshold; /* rx high water mark */
- __u32 rx_get; /* tail index rx buf */
- __u32 rx_put; /* head index rx buf */
- __u32 filler[5]; /* filler to align structures */
-};
-
-/*
- * BOARD_CTRL - This per board structure contains all global
- * control fields related to the board.
- */
-
-struct BOARD_CTRL {
-
- /* static info provided by the on-board CPU */
- __u32 n_channel; /* number of channels */
- __u32 fw_version; /* firmware version */
-
- /* static info provided by the driver */
- __u32 op_system; /* op_system id */
- __u32 dr_version; /* driver version */
-
- /* board control area */
- __u32 inactivity; /* inactivity control */
-
- /* host to FW commands */
- __u32 hcmd_channel; /* channel number */
- __u32 hcmd_param; /* pointer to parameters */
-
- /* FW to Host commands */
- __u32 fwcmd_channel; /* channel number */
- __u32 fwcmd_param; /* pointer to parameters */
- __u32 zf_int_queue_addr; /* offset for INT_QUEUE structure */
-
- /* filler so the structures are aligned */
- __u32 filler[6];
-};
-
-/* Host Interrupt Queue */
-
-#define QUEUE_SIZE (10*MAX_CHAN)
-
-struct INT_QUEUE {
- unsigned char intr_code[QUEUE_SIZE];
- unsigned long channel[QUEUE_SIZE];
- unsigned long param[QUEUE_SIZE];
- unsigned long put;
- unsigned long get;
-};
-
-/*
- * ZFW_CTRL - This is the data structure that includes all other
- * data structures used by the Firmware.
- */
-
-struct ZFW_CTRL {
- struct BOARD_CTRL board_ctrl;
- struct CH_CTRL ch_ctrl[MAX_CHAN];
- struct BUF_CTRL buf_ctrl[MAX_CHAN];
-};
-
-/****************** ****************** *******************/
-#endif
-
-#endif /* _UAPI_LINUX_CYCLADES_H */
diff --git a/include/uapi/linux/major.h b/include/uapi/linux/major.h
index 7e5fa8e15c43..4e5f2b3a3d54 100644
--- a/include/uapi/linux/major.h
+++ b/include/uapi/linux/major.h
@@ -34,8 +34,6 @@
#define GOLDSTAR_CDROM_MAJOR 16
#define OPTICS_CDROM_MAJOR 17
#define SANYO_CDROM_MAJOR 18
-#define CYCLADES_MAJOR 19
-#define CYCLADESAUX_MAJOR 20
#define MITSUMI_X_CDROM_MAJOR 20
#define MFM_ACORN_MAJOR 21 /* ARM Linux /dev/mfm */
#define SCSI_GENERIC_MAJOR 21
diff --git a/include/uapi/linux/serial.h b/include/uapi/linux/serial.h
index 93eb3c496ff1..fa6b16e5fdd8 100644
--- a/include/uapi/linux/serial.h
+++ b/include/uapi/linux/serial.h
@@ -52,11 +52,11 @@ struct serial_struct {
#define PORT_16450 2
#define PORT_16550 3
#define PORT_16550A 4
-#define PORT_CIRRUS 5 /* usurped by cyclades.c */
+#define PORT_CIRRUS 5
#define PORT_16650 6
#define PORT_16650V2 7
#define PORT_16750 8
-#define PORT_STARTECH 9 /* usurped by cyclades.c */
+#define PORT_STARTECH 9
#define PORT_16C950 10 /* Oxford Semiconductor */
#define PORT_16654 11
#define PORT_16850 12
diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h
index 900a32e63424..cf25056d4b27 100644
--- a/include/uapi/linux/tty_flags.h
+++ b/include/uapi/linux/tty_flags.h
@@ -39,7 +39,7 @@
* WARNING: These flags are no longer used and have been superceded by the
* TTY_PORT_ flags in the iflags field (and not userspace-visible)
*/
-#ifndef _KERNEL_
+#ifndef __KERNEL__
#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
@@ -73,15 +73,15 @@
#define ASYNC_MAGIC_MULTIPLIER (1U << ASYNCB_MAGIC_MULTIPLIER)
#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
-#define ASYNC_DEPRECATED (ASYNC_SESSION_LOCKOUT | ASYNC_PGRP_LOCKOUT | \
- ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
+#define ASYNC_DEPRECATED (ASYNC_SPLIT_TERMIOS | ASYNC_SESSION_LOCKOUT | \
+ ASYNC_PGRP_LOCKOUT | ASYNC_CALLOUT_NOHUP | ASYNC_AUTOPROBE)
#define ASYNC_USR_MASK (ASYNC_SPD_MASK|ASYNC_CALLOUT_NOHUP| \
ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST (ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP (ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK (ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)
-#ifndef _KERNEL_
+#ifndef __KERNEL__
/* These flags are no longer used (and were always masked from userspace) */
#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-30 13:40:50 +0300