diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/soc/mscc/ocelot.h | 60 |
1 files changed, 60 insertions, 0 deletions
diff --git a/include/soc/mscc/ocelot.h b/include/soc/mscc/ocelot.h index 23dd4ad31a32..007b584cc431 100644 --- a/include/soc/mscc/ocelot.h +++ b/include/soc/mscc/ocelot.h @@ -11,6 +11,66 @@ #include <linux/regmap.h> #include <net/dsa.h> +/* Port Group IDs (PGID) are masks of destination ports. + * + * For L2 forwarding, the switch performs 3 lookups in the PGID table for each + * frame, and forwards the frame to the ports that are present in the logical + * AND of all 3 PGIDs. + * + * These PGID lookups are: + * - In one of PGID[0-63]: for the destination masks. There are 2 paths by + * which the switch selects a destination PGID: + * - The {DMAC, VID} is present in the MAC table. In that case, the + * destination PGID is given by the DEST_IDX field of the MAC table entry + * that matched. + * - The {DMAC, VID} is not present in the MAC table (it is unknown). The + * frame is disseminated as being either unicast, multicast or broadcast, + * and according to that, the destination PGID is chosen as being the + * value contained by ANA_FLOODING_FLD_UNICAST, + * ANA_FLOODING_FLD_MULTICAST or ANA_FLOODING_FLD_BROADCAST. + * The destination PGID can be an unicast set: the first PGIDs, 0 to + * ocelot->num_phys_ports - 1, or a multicast set: the PGIDs from + * ocelot->num_phys_ports to 63. By convention, a unicast PGID corresponds to + * a physical port and has a single bit set in the destination ports mask: + * that corresponding to the port number itself. In contrast, a multicast + * PGID will have potentially more than one single bit set in the destination + * ports mask. + * - In one of PGID[64-79]: for the aggregation mask. The switch classifier + * dissects each frame and generates a 4-bit Link Aggregation Code which is + * used for this second PGID table lookup. The goal of link aggregation is to + * hash multiple flows within the same LAG on to different destination ports. + * The first lookup will result in a PGID with all the LAG members present in + * the destination ports mask, and the second lookup, by Link Aggregation + * Code, will ensure that each flow gets forwarded only to a single port out + * of that mask (there are no duplicates). + * - In one of PGID[80-90]: for the source mask. The third time, the PGID table + * is indexed with the ingress port (plus 80). These PGIDs answer the + * question "is port i allowed to forward traffic to port j?" If yes, then + * BIT(j) of PGID 80+i will be found set. The third PGID lookup can be used + * to enforce the L2 forwarding matrix imposed by e.g. a Linux bridge. + */ + +/* Reserve some destination PGIDs at the end of the range: + * PGID_CPU: used for whitelisting certain MAC addresses, such as the addresses + * of the switch port net devices, towards the CPU port module. + * PGID_UC: the flooding destinations for unknown unicast traffic. + * PGID_MC: the flooding destinations for broadcast and non-IP multicast + * traffic. + * PGID_MCIPV4: the flooding destinations for IPv4 multicast traffic. + * PGID_MCIPV6: the flooding destinations for IPv6 multicast traffic. + */ +#define PGID_CPU 59 +#define PGID_UC 60 +#define PGID_MC 61 +#define PGID_MCIPV4 62 +#define PGID_MCIPV6 63 + +/* Aggregation PGIDs, one per Link Aggregation Code */ +#define PGID_AGGR 64 + +/* Source PGIDs, one per physical port */ +#define PGID_SRC 80 + #define IFH_INJ_BYPASS BIT(31) #define IFH_INJ_POP_CNT_DISABLE (3 << 28) |