diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/amba/bus.h | 6 | ||||
| -rw-r--r-- | include/linux/device.h | 73 | ||||
| -rw-r--r-- | include/linux/device/driver.h | 2 | ||||
| -rw-r--r-- | include/linux/export.h | 7 | ||||
| -rw-r--r-- | include/linux/firmware.h | 82 | ||||
| -rw-r--r-- | include/linux/fsl/mc.h | 6 | ||||
| -rw-r--r-- | include/linux/hyperv.h | 6 | ||||
| -rw-r--r-- | include/linux/pci.h | 6 | ||||
| -rw-r--r-- | include/linux/platform_device.h | 6 | ||||
| -rw-r--r-- | include/linux/rpmsg.h | 14 | ||||
| -rw-r--r-- | include/linux/spi/spi.h | 2 | ||||
| -rw-r--r-- | include/linux/vdpa.h | 4 | ||||
| -rw-r--r-- | include/trace/events/thermal_pressure.h | 29 |
13 files changed, 231 insertions, 12 deletions
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h index 2ddce9bcd00e..e94cdf235f1d 100644 --- a/include/linux/amba/bus.h +++ b/include/linux/amba/bus.h @@ -70,7 +70,11 @@ struct amba_device { unsigned int cid; struct amba_cs_uci_id uci; unsigned int irq[AMBA_NR_IRQS]; - char *driver_override; + /* + * Driver name to force a match. Do not set directly, because core + * frees it. Use driver_set_override() to set or clear it. + */ + const char *driver_override; }; struct amba_driver { diff --git a/include/linux/device.h b/include/linux/device.h index 073f1b0126ac..dc941997795c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -387,6 +387,75 @@ struct dev_msi_info { }; /** + * enum device_physical_location_panel - Describes which panel surface of the + * system's housing the device connection point resides on. + * @DEVICE_PANEL_TOP: Device connection point is on the top panel. + * @DEVICE_PANEL_BOTTOM: Device connection point is on the bottom panel. + * @DEVICE_PANEL_LEFT: Device connection point is on the left panel. + * @DEVICE_PANEL_RIGHT: Device connection point is on the right panel. + * @DEVICE_PANEL_FRONT: Device connection point is on the front panel. + * @DEVICE_PANEL_BACK: Device connection point is on the back panel. + * @DEVICE_PANEL_UNKNOWN: The panel with device connection point is unknown. + */ +enum device_physical_location_panel { + DEVICE_PANEL_TOP, + DEVICE_PANEL_BOTTOM, + DEVICE_PANEL_LEFT, + DEVICE_PANEL_RIGHT, + DEVICE_PANEL_FRONT, + DEVICE_PANEL_BACK, + DEVICE_PANEL_UNKNOWN, +}; + +/** + * enum device_physical_location_vertical_position - Describes vertical + * position of the device connection point on the panel surface. + * @DEVICE_VERT_POS_UPPER: Device connection point is at upper part of panel. + * @DEVICE_VERT_POS_CENTER: Device connection point is at center part of panel. + * @DEVICE_VERT_POS_LOWER: Device connection point is at lower part of panel. + */ +enum device_physical_location_vertical_position { + DEVICE_VERT_POS_UPPER, + DEVICE_VERT_POS_CENTER, + DEVICE_VERT_POS_LOWER, +}; + +/** + * enum device_physical_location_horizontal_position - Describes horizontal + * position of the device connection point on the panel surface. + * @DEVICE_HORI_POS_LEFT: Device connection point is at left part of panel. + * @DEVICE_HORI_POS_CENTER: Device connection point is at center part of panel. + * @DEVICE_HORI_POS_RIGHT: Device connection point is at right part of panel. + */ +enum device_physical_location_horizontal_position { + DEVICE_HORI_POS_LEFT, + DEVICE_HORI_POS_CENTER, + DEVICE_HORI_POS_RIGHT, +}; + +/** + * struct device_physical_location - Device data related to physical location + * of the device connection point. + * @panel: Panel surface of the system's housing that the device connection + * point resides on. + * @vertical_position: Vertical position of the device connection point within + * the panel. + * @horizontal_position: Horizontal position of the device connection point + * within the panel. + * @dock: Set if the device connection point resides in a docking station or + * port replicator. + * @lid: Set if this device connection point resides on the lid of laptop + * system. + */ +struct device_physical_location { + enum device_physical_location_panel panel; + enum device_physical_location_vertical_position vertical_position; + enum device_physical_location_horizontal_position horizontal_position; + bool dock; + bool lid; +}; + +/** * struct device - The basic device structure * @parent: The device's "parent" device, the device to which it is attached. * In most cases, a parent device is some sort of bus or host @@ -451,6 +520,8 @@ struct dev_msi_info { * device (i.e. the bus driver that discovered the device). * @iommu_group: IOMMU group the device belongs to. * @iommu: Per device generic IOMMU runtime data + * @physical_location: Describes physical location of the device connection + * point in the system housing. * @removable: Whether the device can be removed from the system. This * should be set by the subsystem / bus driver that discovered * the device. @@ -562,6 +633,8 @@ struct device { struct iommu_group *iommu_group; struct dev_iommu *iommu; + struct device_physical_location *physical_location; + enum device_removable removable; bool offline_disabled:1; diff --git a/include/linux/device/driver.h b/include/linux/device/driver.h index 15e7c5e15d62..700453017e1c 100644 --- a/include/linux/device/driver.h +++ b/include/linux/device/driver.h @@ -151,6 +151,8 @@ extern int __must_check driver_create_file(struct device_driver *driver, extern void driver_remove_file(struct device_driver *driver, const struct driver_attribute *attr); +int driver_set_override(struct device *dev, const char **override, + const char *s, size_t len); extern int __must_check driver_for_each_device(struct device_driver *drv, struct device *start, void *data, diff --git a/include/linux/export.h b/include/linux/export.h index 565c5ffcb26f..3f31ced0d977 100644 --- a/include/linux/export.h +++ b/include/linux/export.h @@ -2,6 +2,8 @@ #ifndef _LINUX_EXPORT_H #define _LINUX_EXPORT_H +#include <linux/stringify.h> + /* * Export symbols from the kernel to modules. Forked from module.h * to reduce the amount of pointless cruft we feed to gcc when only @@ -140,7 +142,6 @@ struct kernel_symbol { #endif /* CONFIG_MODULES */ #ifdef DEFAULT_SYMBOL_NAMESPACE -#include <linux/stringify.h> #define _EXPORT_SYMBOL(sym, sec) __EXPORT_SYMBOL(sym, sec, __stringify(DEFAULT_SYMBOL_NAMESPACE)) #else #define _EXPORT_SYMBOL(sym, sec) __EXPORT_SYMBOL(sym, sec, "") @@ -148,8 +149,8 @@ struct kernel_symbol { #define EXPORT_SYMBOL(sym) _EXPORT_SYMBOL(sym, "") #define EXPORT_SYMBOL_GPL(sym) _EXPORT_SYMBOL(sym, "_gpl") -#define EXPORT_SYMBOL_NS(sym, ns) __EXPORT_SYMBOL(sym, "", #ns) -#define EXPORT_SYMBOL_NS_GPL(sym, ns) __EXPORT_SYMBOL(sym, "_gpl", #ns) +#define EXPORT_SYMBOL_NS(sym, ns) __EXPORT_SYMBOL(sym, "", __stringify(ns)) +#define EXPORT_SYMBOL_NS_GPL(sym, ns) __EXPORT_SYMBOL(sym, "_gpl", __stringify(ns)) #endif /* !__ASSEMBLY__ */ diff --git a/include/linux/firmware.h b/include/linux/firmware.h index ec2ccfebef65..de7fea3bca51 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -17,6 +17,64 @@ struct firmware { void *priv; }; +/** + * enum fw_upload_err - firmware upload error codes + * @FW_UPLOAD_ERR_NONE: returned to indicate success + * @FW_UPLOAD_ERR_HW_ERROR: error signalled by hardware, see kernel log + * @FW_UPLOAD_ERR_TIMEOUT: SW timed out on handshake with HW/firmware + * @FW_UPLOAD_ERR_CANCELED: upload was cancelled by the user + * @FW_UPLOAD_ERR_BUSY: there is an upload operation already in progress + * @FW_UPLOAD_ERR_INVALID_SIZE: invalid firmware image size + * @FW_UPLOAD_ERR_RW_ERROR: read or write to HW failed, see kernel log + * @FW_UPLOAD_ERR_WEAROUT: FLASH device is approaching wear-out, wait & retry + * @FW_UPLOAD_ERR_MAX: Maximum error code marker + */ +enum fw_upload_err { + FW_UPLOAD_ERR_NONE, + FW_UPLOAD_ERR_HW_ERROR, + FW_UPLOAD_ERR_TIMEOUT, + FW_UPLOAD_ERR_CANCELED, + FW_UPLOAD_ERR_BUSY, + FW_UPLOAD_ERR_INVALID_SIZE, + FW_UPLOAD_ERR_RW_ERROR, + FW_UPLOAD_ERR_WEAROUT, + FW_UPLOAD_ERR_MAX +}; + +struct fw_upload { + void *dd_handle; /* reference to parent driver */ + void *priv; /* firmware loader private fields */ +}; + +/** + * struct fw_upload_ops - device specific operations to support firmware upload + * @prepare: Required: Prepare secure update + * @write: Required: The write() op receives the remaining + * size to be written and must return the actual + * size written or a negative error code. The write() + * op will be called repeatedly until all data is + * written. + * @poll_complete: Required: Check for the completion of the + * HW authentication/programming process. + * @cancel: Required: Request cancellation of update. This op + * is called from the context of a different kernel + * thread, so race conditions need to be considered. + * @cleanup: Optional: Complements the prepare() + * function and is called at the completion + * of the update, on success or failure, if the + * prepare function succeeded. + */ +struct fw_upload_ops { + enum fw_upload_err (*prepare)(struct fw_upload *fw_upload, + const u8 *data, u32 size); + enum fw_upload_err (*write)(struct fw_upload *fw_upload, + const u8 *data, u32 offset, + u32 size, u32 *written); + enum fw_upload_err (*poll_complete)(struct fw_upload *fw_upload); + void (*cancel)(struct fw_upload *fw_upload); + void (*cleanup)(struct fw_upload *fw_upload); +}; + struct module; struct device; @@ -112,6 +170,30 @@ static inline int request_partial_firmware_into_buf #endif +#ifdef CONFIG_FW_UPLOAD + +struct fw_upload * +firmware_upload_register(struct module *module, struct device *parent, + const char *name, const struct fw_upload_ops *ops, + void *dd_handle); +void firmware_upload_unregister(struct fw_upload *fw_upload); + +#else + +static inline struct fw_upload * +firmware_upload_register(struct module *module, struct device *parent, + const char *name, const struct fw_upload_ops *ops, + void *dd_handle) +{ + return ERR_PTR(-EINVAL); +} + +static inline void firmware_upload_unregister(struct fw_upload *fw_upload) +{ +} + +#endif + int firmware_request_cache(struct device *device, const char *name); #endif diff --git a/include/linux/fsl/mc.h b/include/linux/fsl/mc.h index 27efef8affb1..a86115bc799c 100644 --- a/include/linux/fsl/mc.h +++ b/include/linux/fsl/mc.h @@ -178,7 +178,9 @@ struct fsl_mc_obj_desc { * @regions: pointer to array of MMIO region entries * @irqs: pointer to array of pointers to interrupts allocated to this device * @resource: generic resource associated with this MC object device, if any. - * @driver_override: driver name to force a match + * @driver_override: driver name to force a match; do not set directly, + * because core frees it; use driver_set_override() to + * set or clear it. * * Generic device object for MC object devices that are "attached" to a * MC bus. @@ -212,7 +214,7 @@ struct fsl_mc_device { struct fsl_mc_device_irq **irqs; struct fsl_mc_resource *resource; struct device_link *consumer_link; - char *driver_override; + const char *driver_override; }; #define to_fsl_mc_device(_dev) \ diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index a2464295c14a..3b42264333ef 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -1292,7 +1292,11 @@ struct hv_device { u16 device_id; struct device device; - char *driver_override; /* Driver name to force a match */ + /* + * Driver name to force a match. Do not set directly, because core + * frees it. Use driver_set_override() to set or clear it. + */ + const char *driver_override; struct vmbus_channel *channel; struct kset *channels_kset; diff --git a/include/linux/pci.h b/include/linux/pci.h index 993674b32717..81a57b498f22 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -512,7 +512,11 @@ struct pci_dev { u16 acs_cap; /* ACS Capability offset */ phys_addr_t rom; /* Physical address if not from BAR */ size_t romlen; /* Length if not from BAR */ - char *driver_override; /* Driver name to force a match */ + /* + * Driver name to force a match. Do not set directly, because core + * frees it. Use driver_set_override() to set or clear it. + */ + const char *driver_override; unsigned long priv_flags; /* Private flags for the PCI driver */ diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index b3d9c744f1e5..b0d5a253156e 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -31,7 +31,11 @@ struct platform_device { struct resource *resource; const struct platform_device_id *id_entry; - char *driver_override; /* Driver name to force a match */ + /* + * Driver name to force a match. Do not set directly, because core + * frees it. Use driver_set_override() to set or clear it. + */ + const char *driver_override; /* MFD cell pointer */ struct mfd_cell *mfd_cell; diff --git a/include/linux/rpmsg.h b/include/linux/rpmsg.h index 02fa9116cd60..523c98b96cb4 100644 --- a/include/linux/rpmsg.h +++ b/include/linux/rpmsg.h @@ -41,7 +41,9 @@ struct rpmsg_channel_info { * rpmsg_device - device that belong to the rpmsg bus * @dev: the device struct * @id: device id (used to match between rpmsg drivers and devices) - * @driver_override: driver name to force a match + * @driver_override: driver name to force a match; do not set directly, + * because core frees it; use driver_set_override() to + * set or clear it. * @src: local address * @dst: destination address * @ept: the rpmsg endpoint of this channel @@ -51,7 +53,7 @@ struct rpmsg_channel_info { struct rpmsg_device { struct device dev; struct rpmsg_device_id id; - char *driver_override; + const char *driver_override; u32 src; u32 dst; struct rpmsg_endpoint *ept; @@ -163,6 +165,8 @@ static inline __rpmsg64 cpu_to_rpmsg64(struct rpmsg_device *rpdev, u64 val) #if IS_ENABLED(CONFIG_RPMSG) +int rpmsg_register_device_override(struct rpmsg_device *rpdev, + const char *driver_override); int rpmsg_register_device(struct rpmsg_device *rpdev); int rpmsg_unregister_device(struct device *parent, struct rpmsg_channel_info *chinfo); @@ -190,6 +194,12 @@ ssize_t rpmsg_get_mtu(struct rpmsg_endpoint *ept); #else +static inline int rpmsg_register_device_override(struct rpmsg_device *rpdev, + const char *driver_override) +{ + return -ENXIO; +} + static inline int rpmsg_register_device(struct rpmsg_device *rpdev) { return -ENXIO; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index df70eb1a671e..d361ba26203b 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -138,6 +138,8 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer); * for driver coldplugging, and in uevents used for hotplugging * @driver_override: If the name of a driver is written to this attribute, then * the device will bind to the named driver and only the named driver. + * Do not set directly, because core frees it; use driver_set_override() to + * set or clear it. * @cs_gpiod: gpio descriptor of the chipselect line (optional, NULL when * not using a GPIO line) * @word_delay: delay to be inserted between consecutive diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h index 15af802d41c4..4700a88a28f6 100644 --- a/include/linux/vdpa.h +++ b/include/linux/vdpa.h @@ -64,7 +64,9 @@ struct vdpa_mgmt_dev; * struct vdpa_device - representation of a vDPA device * @dev: underlying device * @dma_dev: the actual device that is performing DMA - * @driver_override: driver name to force a match + * @driver_override: driver name to force a match; do not set directly, + * because core frees it; use driver_set_override() to + * set or clear it. * @config: the configuration ops for this device. * @cf_lock: Protects get and set access to configuration layout. * @index: device index diff --git a/include/trace/events/thermal_pressure.h b/include/trace/events/thermal_pressure.h new file mode 100644 index 000000000000..b68680201360 --- /dev/null +++ b/include/trace/events/thermal_pressure.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM thermal_pressure + +#if !defined(_TRACE_THERMAL_PRESSURE_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_THERMAL_PRESSURE_H + +#include <linux/tracepoint.h> + +TRACE_EVENT(thermal_pressure_update, + TP_PROTO(int cpu, unsigned long thermal_pressure), + TP_ARGS(cpu, thermal_pressure), + + TP_STRUCT__entry( + __field(unsigned long, thermal_pressure) + __field(int, cpu) + ), + + TP_fast_assign( + __entry->thermal_pressure = thermal_pressure; + __entry->cpu = cpu; + ), + + TP_printk("cpu=%d thermal_pressure=%lu", __entry->cpu, __entry->thermal_pressure) +); +#endif /* _TRACE_THERMAL_PRESSURE_H */ + +/* This part must be outside protection */ +#include <trace/define_trace.h> |