diff options
Diffstat (limited to 'include')
35 files changed, 1123 insertions, 238 deletions
diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 6a5716655619..2a1f85f9a8a3 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -126,6 +126,8 @@ struct dw_hdmi_phy_ops { struct dw_hdmi_plat_data { struct regmap *regm; + unsigned int output_port; + unsigned long input_bus_encoding; bool use_drm_infoframe; bool ycbcr_420_allowed; diff --git a/include/drm/drm_aperture.h b/include/drm/drm_aperture.h index 6c148078780c..7096703c3949 100644 --- a/include/drm/drm_aperture.h +++ b/include/drm/drm_aperture.h @@ -6,20 +6,22 @@ #include <linux/types.h> struct drm_device; +struct drm_driver; struct pci_dev; int devm_aperture_acquire_from_firmware(struct drm_device *dev, resource_size_t base, resource_size_t size); int drm_aperture_remove_conflicting_framebuffers(resource_size_t base, resource_size_t size, - bool primary, const char *name); + bool primary, const struct drm_driver *req_driver); -int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev, const char *name); +int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev, + const struct drm_driver *req_driver); /** * drm_aperture_remove_framebuffers - remove all existing framebuffers * @primary: also kick vga16fb if present - * @name: requesting driver name + * @req_driver: requesting DRM driver * * This function removes all graphics device drivers. Use this function on systems * that can have their framebuffer located anywhere in memory. @@ -27,9 +29,11 @@ int drm_aperture_remove_conflicting_pci_framebuffers(struct pci_dev *pdev, const * Returns: * 0 on success, or a negative errno code otherwise */ -static inline int drm_aperture_remove_framebuffers(bool primary, const char *name) +static inline int +drm_aperture_remove_framebuffers(bool primary, const struct drm_driver *req_driver) { - return drm_aperture_remove_conflicting_framebuffers(0, (resource_size_t)-1, primary, name); + return drm_aperture_remove_conflicting_framebuffers(0, (resource_size_t)-1, primary, + req_driver); } #endif diff --git a/include/drm/drm_auth.h b/include/drm/drm_auth.h index 6bf8b2b78991..ba248ca8866f 100644 --- a/include/drm/drm_auth.h +++ b/include/drm/drm_auth.h @@ -58,12 +58,6 @@ struct drm_lock_data { * @refcount: Refcount for this master object. * @dev: Link back to the DRM device * @driver_priv: Pointer to driver-private information. - * @lessor: Lease holder - * @lessee_id: id for lessees. Owners always have id 0 - * @lessee_list: other lessees of the same master - * @lessees: drm_masters leasing from this one - * @leases: Objects leased to this drm_master. - * @lessee_idr: All lessees under this owner (only used where lessor == NULL) * * Note that master structures are only relevant for the legacy/primary device * nodes, hence there can only be one per device, not one per drm_minor. @@ -88,17 +82,68 @@ struct drm_master { struct idr magic_map; void *driver_priv; - /* Tree of display resource leases, each of which is a drm_master struct - * All of these get activated simultaneously, so drm_device master points - * at the top of the tree (for which lessor is NULL). Protected by - * &drm_device.mode_config.idr_mutex. + /** + * @lessor: + * + * Lease grantor, only set if this &struct drm_master represents a + * lessee holding a lease of objects from @lessor. Full owners of the + * device have this set to NULL. + * + * The lessor does not change once it's set in drm_lease_create(), and + * each lessee holds a reference to its lessor that it releases upon + * being destroyed in drm_lease_destroy(). + * + * See also the :ref:`section on display resource leasing + * <drm_leasing>`. */ - struct drm_master *lessor; + + /** + * @lessee_id: + * + * ID for lessees. Owners (i.e. @lessor is NULL) always have ID 0. + * Protected by &drm_device.mode_config's &drm_mode_config.idr_mutex. + */ int lessee_id; + + /** + * @lessee_list: + * + * List entry of lessees of @lessor, where they are linked to @lessees. + * Not used for owners. Protected by &drm_device.mode_config's + * &drm_mode_config.idr_mutex. + */ struct list_head lessee_list; + + /** + * @lessees: + * + * List of drm_masters leasing from this one. Protected by + * &drm_device.mode_config's &drm_mode_config.idr_mutex. + * + * This list is empty if no leases have been granted, or if all lessees + * have been destroyed. Since lessors are referenced by all their + * lessees, this master cannot be destroyed unless the list is empty. + */ struct list_head lessees; + + /** + * @leases: + * + * Objects leased to this drm_master. Protected by + * &drm_device.mode_config's &drm_mode_config.idr_mutex. + * + * Objects are leased all together in drm_lease_create(), and are + * removed all together when the lease is revoked. + */ struct idr leases; + + /** + * @lessee_idr: + * + * All lessees under this owner (only used where @lessor is NULL). + * Protected by &drm_device.mode_config's &drm_mode_config.idr_mutex. + */ struct idr lessee_idr; /* private: */ #if IS_ENABLED(CONFIG_DRM_LEGACY) @@ -107,6 +152,7 @@ struct drm_master { }; struct drm_master *drm_master_get(struct drm_master *master); +struct drm_master *drm_file_get_master(struct drm_file *file_priv); void drm_master_put(struct drm_master **master); bool drm_is_current_master(struct drm_file *fpriv); diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 2195daa289d2..46bdfa48c413 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -171,6 +171,11 @@ struct drm_bridge_funcs { * signals) feeding it is still running when this callback is called. * * The @disable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_disable. */ void (*disable)(struct drm_bridge *bridge); @@ -190,6 +195,11 @@ struct drm_bridge_funcs { * called. * * The @post_disable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_post_disable. */ void (*post_disable)(struct drm_bridge *bridge); @@ -215,9 +225,9 @@ struct drm_bridge_funcs { * * NOTE: * - * If a need arises to store and access modes adjusted for other - * locations than the connection between the CRTC and the first bridge, - * the DRM framework will have to be extended with DRM bridge states. + * This is deprecated, do not use! + * New drivers shall set their mode in the + * &drm_bridge_funcs.atomic_enable operation. */ void (*mode_set)(struct drm_bridge *bridge, const struct drm_display_mode *mode, @@ -239,6 +249,11 @@ struct drm_bridge_funcs { * there is one) when this callback is called. * * The @pre_enable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_pre_enable. */ void (*pre_enable)(struct drm_bridge *bridge); @@ -259,6 +274,11 @@ struct drm_bridge_funcs { * chain if there is one. * * The @enable callback is optional. + * + * NOTE: + * + * This is deprecated, do not use! + * New drivers shall use &drm_bridge_funcs.atomic_enable. */ void (*enable)(struct drm_bridge *bridge); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 714d1a01c065..0a1d9a0fcbb2 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -848,6 +848,11 @@ struct drm_connector_funcs { * locks to avoid races with concurrent modeset changes need to use * &drm_connector_helper_funcs.detect_ctx instead. * + * Also note that this callback can be called no matter the + * state the connector is in. Drivers that need the underlying + * device to be powered to perform the detection will first need + * to make sure it's been properly enabled. + * * RETURNS: * * drm_connector_status indicating the connector's status. diff --git a/include/drm/drm_damage_helper.h b/include/drm/drm_damage_helper.h index 40c34a5bf149..effda42cce31 100644 --- a/include/drm/drm_damage_helper.h +++ b/include/drm/drm_damage_helper.h @@ -64,7 +64,6 @@ struct drm_atomic_helper_damage_iter { bool full_update; }; -void drm_plane_enable_fb_damage_clips(struct drm_plane *plane); void drm_atomic_helper_check_plane_damage(struct drm_atomic_state *state, struct drm_plane_state *plane_state); int drm_atomic_helper_dirtyfb(struct drm_framebuffer *fb, @@ -82,21 +81,4 @@ bool drm_atomic_helper_damage_merged(const struct drm_plane_state *old_state, struct drm_plane_state *state, struct drm_rect *rect); -/** - * drm_helper_get_plane_damage_clips - Returns damage clips in &drm_rect. - * @state: Plane state. - * - * Returns plane damage rectangles in internal &drm_rect. Currently &drm_rect - * can be obtained by simply typecasting &drm_mode_rect. This is because both - * are signed 32 and during drm_atomic_check_only() it is verified that damage - * clips are inside fb. - * - * Return: Clips in plane fb_damage_clips blob property. - */ -static inline struct drm_rect * -drm_helper_get_plane_damage_clips(const struct drm_plane_state *state) -{ - return (struct drm_rect *)drm_plane_get_damage_clips(state); -} - #endif diff --git a/include/drm/drm_dp_aux_bus.h b/include/drm/drm_dp_aux_bus.h new file mode 100644 index 000000000000..4f19b20b1dd6 --- /dev/null +++ b/include/drm/drm_dp_aux_bus.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2021 Google Inc. + * + * The DP AUX bus is used for devices that are connected over a DisplayPort + * AUX bus. The devices on the far side of the bus are referred to as + * endpoints in this code. + */ + +#ifndef _DP_AUX_BUS_H_ +#define _DP_AUX_BUS_H_ + +#include <linux/device.h> +#include <linux/mod_devicetable.h> + +/** + * struct dp_aux_ep_device - Main dev structure for DP AUX endpoints + * + * This is used to instantiate devices that are connected via a DP AUX + * bus. Usually the device is a panel, but conceivable other devices could + * be hooked up there. + */ +struct dp_aux_ep_device { + /** @dev: The normal dev pointer */ + struct device dev; + /** @aux: Pointer to the aux bus */ + struct drm_dp_aux *aux; +}; + +struct dp_aux_ep_driver { + int (*probe)(struct dp_aux_ep_device *aux_ep); + void (*remove)(struct dp_aux_ep_device *aux_ep); + void (*shutdown)(struct dp_aux_ep_device *aux_ep); + struct device_driver driver; +}; + +static inline struct dp_aux_ep_device *to_dp_aux_ep_dev(struct device *dev) +{ + return container_of(dev, struct dp_aux_ep_device, dev); +} + +static inline struct dp_aux_ep_driver *to_dp_aux_ep_drv(struct device_driver *drv) +{ + return container_of(drv, struct dp_aux_ep_driver, driver); +} + +int of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux); +void of_dp_aux_depopulate_ep_devices(struct drm_dp_aux *aux); +int devm_of_dp_aux_populate_ep_devices(struct drm_dp_aux *aux); + +#define dp_aux_dp_driver_register(aux_ep_drv) \ + __dp_aux_dp_driver_register(aux_ep_drv, THIS_MODULE) +int __dp_aux_dp_driver_register(struct dp_aux_ep_driver *aux_ep_drv, + struct module *owner); +void dp_aux_dp_driver_unregister(struct dp_aux_ep_driver *aux_ep_drv); + +#endif /* _DP_AUX_BUS_H_ */ diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 3f2715eb965f..1d5b3dbb6e56 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -30,6 +30,7 @@ struct drm_device; struct drm_dp_aux; +struct drm_panel; /* * Unless otherwise noted, all values are from the DP 1.1a spec. Note that @@ -1818,6 +1819,24 @@ drm_dp_sink_can_do_video_without_timing_msa(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) DP_MSA_TIMING_PAR_IGNORED; } +/** + * drm_edp_backlight_supported() - Check an eDP DPCD for VESA backlight support + * @edp_dpcd: The DPCD to check + * + * Note that currently this function will return %false for panels which support various DPCD + * backlight features but which require the brightness be set through PWM, and don't support setting + * the brightness level via the DPCD. This is a TODO. + * + * Returns: %True if @edp_dpcd indicates that VESA backlight controls are supported, %false + * otherwise + */ +static inline bool +drm_edp_backlight_supported(const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE]) +{ + return (edp_dpcd[1] & DP_EDP_TCON_BACKLIGHT_ADJUSTMENT_CAP) && + (edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_AUX_SET_CAP); +} + /* * DisplayPort AUX channel */ @@ -1858,35 +1877,6 @@ struct drm_dp_aux_cec { /** * struct drm_dp_aux - DisplayPort AUX channel - * @name: user-visible name of this AUX channel and the I2C-over-AUX adapter - * @ddc: I2C adapter that can be used for I2C-over-AUX communication - * @dev: pointer to struct device that is the parent for this AUX channel - * @drm_dev: pointer to the &drm_device that owns this AUX channel. Beware, this - * may be %NULL before drm_dp_aux_register() has been called. - * @crtc: backpointer to the crtc that is currently using this AUX channel - * @hw_mutex: internal mutex used for locking transfers - * @crc_work: worker that captures CRCs for each frame - * @crc_count: counter of captured frame CRCs - * @transfer: transfers a message representing a single AUX transaction - * - * The @dev field should be set to a pointer to the device that implements the - * AUX channel. As well, the @drm_dev field should be set to the &drm_device - * that will be using this AUX channel as early as possible. For many graphics - * drivers this should happen before drm_dp_aux_init(), however it's perfectly - * fine to set this field later so long as it's assigned before calling - * drm_dp_aux_register(). - * - * The @name field may be used to specify the name of the I2C adapter. If set to - * %NULL, dev_name() of @dev will be used. - * - * Drivers provide a hardware-specific implementation of how transactions are - * executed via the @transfer() function. A pointer to a &drm_dp_aux_msg - * structure describing the transaction is passed into this function. Upon - * success, the implementation should return the number of payload bytes that - * were transferred, or a negative error-code on failure. Helpers propagate - * errors from the @transfer() function, with the exception of the %-EBUSY - * error, which causes a transaction to be retried. On a short, helpers will - * return %-EPROTO to make it simpler to check for failure. * * An AUX channel can also be used to transport I2C messages to a sink. A * typical application of that is to access an EDID that's present in the sink @@ -1897,22 +1887,96 @@ struct drm_dp_aux_cec { * transfers by default; if a partial response is received, the adapter will * drop down to the size given by the partial response for this transaction * only. - * - * Note that the aux helper code assumes that the @transfer() function only - * modifies the reply field of the &drm_dp_aux_msg structure. The retry logic - * and i2c helpers assume this is the case. */ struct drm_dp_aux { + /** + * @name: user-visible name of this AUX channel and the + * I2C-over-AUX adapter. + * + * It's also used to specify the name of the I2C adapter. If set + * to %NULL, dev_name() of @dev will be used. + */ const char *name; + + /** + * @ddc: I2C adapter that can be used for I2C-over-AUX + * communication + */ struct i2c_adapter ddc; + + /** + * @dev: pointer to struct device that is the parent for this + * AUX channel. + */ struct device *dev; + + /** + * @drm_dev: pointer to the &drm_device that owns this AUX channel. + * Beware, this may be %NULL before drm_dp_aux_register() has been + * called. + * + * It should be set to the &drm_device that will be using this AUX + * channel as early as possible. For many graphics drivers this should + * happen before drm_dp_aux_init(), however it's perfectly fine to set + * this field later so long as it's assigned before calling + * drm_dp_aux_register(). + */ struct drm_device *drm_dev; + + /** + * @crtc: backpointer to the crtc that is currently using this + * AUX channel + */ struct drm_crtc *crtc; + + /** + * @hw_mutex: internal mutex used for locking transfers. + * + * Note that if the underlying hardware is shared among multiple + * channels, the driver needs to do additional locking to + * prevent concurrent access. + */ struct mutex hw_mutex; + + /** + * @crc_work: worker that captures CRCs for each frame + */ struct work_struct crc_work; + + /** + * @crc_count: counter of captured frame CRCs + */ u8 crc_count; + + /** + * @transfer: transfers a message representing a single AUX + * transaction. + * + * This is a hardware-specific implementation of how + * transactions are executed that the drivers must provide. + * + * A pointer to a &drm_dp_aux_msg structure describing the + * transaction is passed into this function. Upon success, the + * implementation should return the number of payload bytes that + * were transferred, or a negative error-code on failure. + * + * Helpers will propagate these errors, with the exception of + * the %-EBUSY error, which causes a transaction to be retried. + * On a short, helpers will return %-EPROTO to make it simpler + * to check for failure. + * + * The @transfer() function must only modify the reply field of + * the &drm_dp_aux_msg structure. The retry logic and i2c + * helpers assume this is the case. + * + * Also note that this callback can be called no matter the + * state @dev is in. Drivers that need that device to be powered + * to perform this operation will first need to make sure it's + * been properly enabled. + */ ssize_t (*transfer)(struct drm_dp_aux *aux, struct drm_dp_aux_msg *msg); + /** * @i2c_nack_count: Counts I2C NACKs, used for DP validation. */ @@ -2124,6 +2188,51 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) return desc->quirks & BIT(quirk); } +/** + * struct drm_edp_backlight_info - Probed eDP backlight info struct + * @pwmgen_bit_count: The pwmgen bit count + * @pwm_freq_pre_divider: The PWM frequency pre-divider value being used for this backlight, if any + * @max: The maximum backlight level that may be set + * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? + * @aux_enable: Does the panel support the AUX enable cap? + * + * This structure contains various data about an eDP backlight, which can be populated by using + * drm_edp_backlight_init(). + */ +struct drm_edp_backlight_info { + u8 pwmgen_bit_count; + u8 pwm_freq_pre_divider; + u16 max; + + bool lsb_reg_used : 1; + bool aux_enable : 1; +}; + +int +drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], + u16 *current_level, u8 *current_mode); +int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, + u16 level); +int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); + +#if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ + (IS_MODULE(CONFIG_DRM_KMS_HELPER) && IS_MODULE(CONFIG_BACKLIGHT_CLASS_DEVICE))) + +int drm_panel_dp_aux_backlight(struct drm_panel *panel, struct drm_dp_aux *aux); + +#else + +static inline int drm_panel_dp_aux_backlight(struct drm_panel *panel, + struct drm_dp_aux *aux) +{ + return 0; +} + +#endif + #ifdef CONFIG_DRM_DP_CEC void drm_dp_cec_irq(struct drm_dp_aux *aux); void drm_dp_cec_register_connector(struct drm_dp_aux *aux, diff --git a/include/drm/drm_file.h b/include/drm/drm_file.h index b81b3bfb08c8..726cfe0ff5f5 100644 --- a/include/drm/drm_file.h +++ b/include/drm/drm_file.h @@ -226,15 +226,27 @@ struct drm_file { /** * @master: * - * Master this node is currently associated with. Only relevant if - * drm_is_primary_client() returns true. Note that this only - * matches &drm_device.master if the master is the currently active one. + * Master this node is currently associated with. Protected by struct + * &drm_device.master_mutex, and serialized by @master_lookup_lock. + * + * Only relevant if drm_is_primary_client() returns true. Note that + * this only matches &drm_device.master if the master is the currently + * active one. + * + * When dereferencing this pointer, either hold struct + * &drm_device.master_mutex for the duration of the pointer's use, or + * use drm_file_get_master() if struct &drm_device.master_mutex is not + * currently held and there is no other need to hold it. This prevents + * @master from being freed during use. * * See also @authentication and @is_master and the :ref:`section on * primary nodes and authentication <drm_primary_node>`. */ struct drm_master *master; + /** @master_lock: Serializes @master. */ + spinlock_t master_lookup_lock; + /** @pid: Process that opened this file. */ struct pid *pid; diff --git a/include/drm/drm_gem_atomic_helper.h b/include/drm/drm_gem_atomic_helper.h index cfc5adee3d13..d82c23622156 100644 --- a/include/drm/drm_gem_atomic_helper.h +++ b/include/drm/drm_gem_atomic_helper.h @@ -53,6 +53,12 @@ to_drm_shadow_plane_state(struct drm_plane_state *state) return container_of(state, struct drm_shadow_plane_state, base); } +void __drm_gem_duplicate_shadow_plane_state(struct drm_plane *plane, + struct drm_shadow_plane_state *new_shadow_plane_state); +void __drm_gem_destroy_shadow_plane_state(struct drm_shadow_plane_state *shadow_plane_state); +void __drm_gem_reset_shadow_plane(struct drm_plane *plane, + struct drm_shadow_plane_state *shadow_plane_state); + void drm_gem_reset_shadow_plane(struct drm_plane *plane); struct drm_plane_state *drm_gem_duplicate_shadow_plane_state(struct drm_plane *plane); void drm_gem_destroy_shadow_plane_state(struct drm_plane *plane, diff --git a/include/drm/drm_gem_framebuffer_helper.h b/include/drm/drm_gem_framebuffer_helper.h index 6bdffc7aa124..5705722f0855 100644 --- a/include/drm/drm_gem_framebuffer_helper.h +++ b/include/drm/drm_gem_framebuffer_helper.h @@ -1,6 +1,9 @@ #ifndef __DRM_GEM_FB_HELPER_H__ #define __DRM_GEM_FB_HELPER_H__ +#include <linux/dma-buf.h> +#include <linux/dma-buf-map.h> + struct drm_afbc_framebuffer; struct drm_device; struct drm_fb_helper_surface_size; @@ -34,6 +37,9 @@ struct drm_framebuffer * drm_gem_fb_create_with_dirty(struct drm_device *dev, struct drm_file *file, const struct drm_mode_fb_cmd2 *mode_cmd); +int drm_gem_fb_begin_cpu_access(struct drm_framebuffer *fb, enum dma_data_direction dir); +void drm_gem_fb_end_cpu_access(struct drm_framebuffer *fb, enum dma_data_direction dir); + #define drm_is_afbc(modifier) \ (((modifier) & AFBC_VENDOR_AND_TYPE_MASK) == DRM_FORMAT_MOD_ARM_AFBC(0)) diff --git a/include/drm/drm_gem_vram_helper.h b/include/drm/drm_gem_vram_helper.h index 27ed7e9243b9..d3cf06c9af65 100644 --- a/include/drm/drm_gem_vram_helper.h +++ b/include/drm/drm_gem_vram_helper.h @@ -124,6 +124,18 @@ void drm_gem_vram_plane_helper_cleanup_fb(struct drm_plane *plane, struct drm_plane_state *old_state); +/** + * DRM_GEM_VRAM_PLANE_HELPER_FUNCS - + * Initializes struct drm_plane_helper_funcs for VRAM handling + * + * Drivers may use GEM BOs as VRAM helpers for the framebuffer memory. This + * macro initializes struct drm_plane_helper_funcs to use the respective helper + * functions. + */ +#define DRM_GEM_VRAM_PLANE_HELPER_FUNCS \ + .prepare_fb = drm_gem_vram_plane_helper_prepare_fb, \ + .cleanup_fb = drm_gem_vram_plane_helper_cleanup_fb + /* * Helpers for struct drm_simple_display_pipe_funcs */ @@ -192,10 +204,6 @@ void drm_vram_mm_debugfs_init(struct drm_minor *minor); * Helpers for integration with struct drm_device */ -struct drm_vram_mm *drm_vram_helper_alloc_mm( - struct drm_device *dev, uint64_t vram_base, size_t vram_size); -void drm_vram_helper_release_mm(struct drm_device *dev); - int drmm_vram_helper_init(struct drm_device *dev, uint64_t vram_base, size_t vram_size); diff --git a/include/drm/drm_mipi_dbi.h b/include/drm/drm_mipi_dbi.h index f543d6e3e822..05e194958265 100644 --- a/include/drm/drm_mipi_dbi.h +++ b/include/drm/drm_mipi_dbi.h @@ -183,7 +183,12 @@ int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb, #define mipi_dbi_command(dbi, cmd, seq...) \ ({ \ const u8 d[] = { seq }; \ - mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \ + struct device *dev = &(dbi)->spi->dev; \ + int ret; \ + ret = mipi_dbi_command_stackbuf(dbi, cmd, d, ARRAY_SIZE(d)); \ + if (ret) \ + dev_err_ratelimited(dev, "error %d when sending command %#02x\n", ret, cmd); \ + ret; \ }) #ifdef CONFIG_DEBUG_FS diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index 360e6377e84b..af7ba8071eb0 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -80,6 +80,11 @@ int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, * Note that typically DSI packet transmission is atomic, so the .transfer() * function will seldomly return anything other than the number of bytes * contained in the transmit buffer on success. + * + * Also note that those callbacks can be called no matter the state the + * host is in. Drivers that need the underlying device to be powered to + * perform these operations will first need to make sure it's been + * properly enabled. */ struct mipi_dsi_host_ops { int (*attach)(struct mipi_dsi_host *host, @@ -119,15 +124,15 @@ struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); /* enable hsync-end packets in vsync-pulse and v-porch area */ #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) /* disable hfront-porch area */ -#define MIPI_DSI_MODE_VIDEO_HFP BIT(5) +#define MIPI_DSI_MODE_VIDEO_NO_HFP BIT(5) /* disable hback-porch area */ -#define MIPI_DSI_MODE_VIDEO_HBP BIT(6) +#define MIPI_DSI_MODE_VIDEO_NO_HBP BIT(6) /* disable hsync-active area */ -#define MIPI_DSI_MODE_VIDEO_HSA BIT(7) +#define MIPI_DSI_MODE_VIDEO_NO_HSA BIT(7) /* flush display FIFO on vsync pulse */ #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) /* disable EoT packets in HS mode */ -#define MIPI_DSI_MODE_EOT_PACKET BIT(9) +#define MIPI_DSI_MODE_NO_EOT_PACKET BIT(9) /* device supports non-continuous clock behavior (DSI spec 5.6.1) */ #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) /* transmit data in low power */ diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h index f3a4b47b3986..fdfa9f37ce05 100644 --- a/include/drm/drm_modeset_helper_vtables.h +++ b/include/drm/drm_modeset_helper_vtables.h @@ -1178,8 +1178,11 @@ struct drm_plane_helper_funcs { * equivalent functionality should be implemented through private * members in the plane structure. * - * Drivers which always have their buffers pinned should use - * drm_gem_plane_helper_prepare_fb() for this hook. + * For GEM drivers who neither have a @prepare_fb nor @cleanup_fb hook + * set drm_gem_plane_helper_prepare_fb() is called automatically to + * implement this. Other drivers which need additional plane processing + * can call drm_gem_plane_helper_prepare_fb() from their @prepare_fb + * hook. * * The helpers will call @cleanup_fb with matching arguments for every * successful call to this hook. diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index 33605c3f0eba..4602f833eb51 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -64,8 +64,8 @@ enum drm_panel_orientation; * the panel. This is the job of the .unprepare() function. * * Backlight can be handled automatically if configured using - * drm_panel_of_backlight(). Then the driver does not need to implement the - * functionality to enable/disable backlight. + * drm_panel_of_backlight() or drm_panel_dp_aux_backlight(). Then the driver + * does not need to implement the functionality to enable/disable backlight. */ struct drm_panel_funcs { /** @@ -144,8 +144,8 @@ struct drm_panel { * Backlight device, used to turn on backlight after the call * to enable(), and to turn off backlight before the call to * disable(). - * backlight is set by drm_panel_of_backlight() and drivers - * shall not assign it. + * backlight is set by drm_panel_of_backlight() or + * drm_panel_dp_aux_backlight() and drivers shall not assign it. */ struct backlight_device *backlight; diff --git a/include/drm/drm_plane.h b/include/drm/drm_plane.h index 1294610e84f4..fed97e35626f 100644 --- a/include/drm/drm_plane.h +++ b/include/drm/drm_plane.h @@ -186,6 +186,9 @@ struct drm_plane_state { * since last plane update) as an array of &drm_mode_rect in framebuffer * coodinates of the attached framebuffer. Note that unlike plane src, * damage clips are not in 16.16 fixed point. + * + * See drm_plane_get_damage_clips() and + * drm_plane_get_damage_clips_count() for accessing these. */ struct drm_property_blob *fb_damage_clips; @@ -894,38 +897,12 @@ static inline struct drm_plane *drm_plane_find(struct drm_device *dev, bool drm_any_plane_has_format(struct drm_device *dev, u32 format, u64 modifier); -/** - * drm_plane_get_damage_clips_count - Returns damage clips count. - * @state: Plane state. - * - * Simple helper to get the number of &drm_mode_rect clips set by user-space - * during plane update. - * - * Return: Number of clips in plane fb_damage_clips blob property. - */ -static inline unsigned int -drm_plane_get_damage_clips_count(const struct drm_plane_state *state) -{ - return (state && state->fb_damage_clips) ? - state->fb_damage_clips->length/sizeof(struct drm_mode_rect) : 0; -} -/** - * drm_plane_get_damage_clips - Returns damage clips. - * @state: Plane state. - * - * Note that this function returns uapi type &drm_mode_rect. Drivers might - * instead be interested in internal &drm_rect which can be obtained by calling - * drm_helper_get_plane_damage_clips(). - * - * Return: Damage clips in plane fb_damage_clips blob property. - */ -static inline struct drm_mode_rect * -drm_plane_get_damage_clips(const struct drm_plane_state *state) -{ - return (struct drm_mode_rect *)((state && state->fb_damage_clips) ? - state->fb_damage_clips->data : NULL); -} +void drm_plane_enable_fb_damage_clips(struct drm_plane *plane); +unsigned int +drm_plane_get_damage_clips_count(const struct drm_plane_state *state); +struct drm_mode_rect * +drm_plane_get_damage_clips(const struct drm_plane_state *state); int drm_plane_create_scaling_filter_property(struct drm_plane *plane, unsigned int supported_filters); diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h index 9b66be54dd16..15a089a87c22 100644 --- a/include/drm/drm_print.h +++ b/include/drm/drm_print.h @@ -327,7 +327,7 @@ static inline bool drm_debug_enabled(enum drm_debug_category category) /* * struct device based logging * - * Prefer drm_device based logging over device or prink based logging. + * Prefer drm_device based logging over device or printk based logging. */ __printf(3, 4) diff --git a/include/drm/drm_property.h b/include/drm/drm_property.h index bbf5c1fdd7b0..65bc9710a470 100644 --- a/include/drm/drm_property.h +++ b/include/drm/drm_property.h @@ -31,7 +31,6 @@ /** * struct drm_property_enum - symbolic values for enumerations - * @value: numeric property value for this enum entry * @head: list of enum values, linked to &drm_property.enum_list * @name: symbolic name for the enum * @@ -39,6 +38,14 @@ * decoding for each value. This is used for example for the rotation property. */ struct drm_property_enum { + /** + * @value: numeric property value for this enum entry + * + * If the property has the type &DRM_MODE_PROP_BITMASK, @value stores a + * bitshift, not a bitmask. In other words, the enum entry is enabled + * if the bit number @value is set in the property's value. This enum + * entry has the bitmask ``1 << value``. + */ uint64_t value; struct list_head head; char name[DRM_PROP_NAME_LEN]; diff --git a/include/drm/drm_rect.h b/include/drm/drm_rect.h index 39f2deee709c..6f6e19bd4dac 100644 --- a/include/drm/drm_rect.h +++ b/include/drm/drm_rect.h @@ -39,6 +39,9 @@ * @x2: horizontal ending coordinate (exclusive) * @y1: vertical starting coordinate (inclusive) * @y2: vertical ending coordinate (exclusive) + * + * Note that this must match the layout of struct drm_mode_rect or the damage + * helpers like drm_atomic_helper_damage_iter_init() break. */ struct drm_rect { int x1, y1, x2, y2; diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index ef9944e9c5fc..cf07132d4ee8 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -116,8 +116,11 @@ struct drm_simple_display_pipe_funcs { * the documentation for the &drm_plane_helper_funcs.prepare_fb hook for * more details. * - * Drivers which always have their buffers pinned should use - * drm_gem_simple_display_pipe_prepare_fb() for this hook. + * For GEM drivers who neither have a @prepare_fb nor @cleanup_fb hook + * set drm_gem_simple_display_pipe_prepare_fb() is called automatically + * to implement this. Other drivers which need additional plane + * processing can call drm_gem_simple_display_pipe_prepare_fb() from + * their @prepare_fb hook. */ int (*prepare_fb)(struct drm_simple_display_pipe *pipe, struct drm_plane_state *plane_state); diff --git a/include/drm/drm_vma_manager.h b/include/drm/drm_vma_manager.h index 76ac5e97a559..4f8c35206f7c 100644 --- a/include/drm/drm_vma_manager.h +++ b/include/drm/drm_vma_manager.h @@ -53,7 +53,7 @@ struct drm_vma_offset_node { rwlock_t vm_lock; struct drm_mm_node vm_node; struct rb_root vm_files; - bool readonly:1; + void *driver_private; }; struct drm_vma_offset_manager { diff --git a/include/drm/gpu_scheduler.h b/include/drm/gpu_scheduler.h index d18af49fd009..88ae7f331bb1 100644 --- a/include/drm/gpu_scheduler.h +++ b/include/drm/gpu_scheduler.h @@ -239,6 +239,38 @@ struct drm_sched_backend_ops { * @timedout_job: Called when a job has taken too long to execute, * to trigger GPU recovery. * + * This method is called in a workqueue context. + * + * Drivers typically issue a reset to recover from GPU hangs, and this + * procedure usually follows the following workflow: + * + * 1. Stop the scheduler using drm_sched_stop(). This will park the + * scheduler thread and cancel the timeout work, guaranteeing that + * nothing is queued while we reset the hardware queue + * 2. Try to gracefully stop non-faulty jobs (optional) + * 3. Issue a GPU reset (driver-specific) + * 4. Re-submit jobs using drm_sched_resubmit_jobs() + * 5. Restart the scheduler using drm_sched_start(). At that point, new + * jobs can be queued, and the scheduler thread is unblocked + * + * Note that some GPUs have distinct hardware queues but need to reset + * the GPU globally, which requires extra synchronization between the + * timeout handler of the different &drm_gpu_scheduler. One way to + * achieve this synchronization is to create an ordered workqueue + * (using alloc_ordered_workqueue()) at the driver level, and pass this + * queue to drm_sched_init(), to guarantee that timeout handlers are + * executed sequentially. The above workflow needs to be slightly + * adjusted in that case: + * + * 1. Stop all schedulers impacted by the reset using drm_sched_stop() + * 2. Try to gracefully stop non-faulty jobs on all queues impacted by + * the reset (optional) + * 3. Issue a GPU reset on all faulty queues (driver-specific) + * 4. Re-submit jobs on all schedulers impacted by the reset using + * drm_sched_resubmit_jobs() + * 5. Restart all schedulers that were stopped in step #1 using + * drm_sched_start() + * * Return DRM_GPU_SCHED_STAT_NOMINAL, when all is normal, * and the underlying driver has started or completed recovery. * @@ -269,6 +301,7 @@ struct drm_sched_backend_ops { * finished. * @hw_rq_count: the number of jobs currently in the hardware queue. * @job_id_count: used to assign unique id to the each job. + * @timeout_wq: workqueue used to queue @work_tdr * @work_tdr: schedules a delayed call to @drm_sched_job_timedout after the * timeout interval is over. * @thread: the kthread on which the scheduler which run. @@ -293,6 +326,7 @@ struct drm_gpu_scheduler { wait_queue_head_t job_scheduled; atomic_t hw_rq_count; atomic64_t job_id_count; + struct workqueue_struct *timeout_wq; struct delayed_work work_tdr; struct task_struct *thread; struct list_head pending_list; @@ -306,7 +340,8 @@ struct drm_gpu_scheduler { int drm_sched_init(struct drm_gpu_scheduler *sched, const struct drm_sched_backend_ops *ops, - uint32_t hw_submission, unsigned hang_limit, long timeout, + uint32_t hw_submission, unsigned hang_limit, + long timeout, struct workqueue_struct *timeout_wq, atomic_t *score, const char *name); void drm_sched_fini(struct drm_gpu_scheduler *sched); diff --git a/include/drm/ttm/ttm_placement.h b/include/drm/ttm/ttm_placement.h index aa6ba4d0cf78..8995c9e4ec1b 100644 --- a/include/drm/ttm/ttm_placement.h +++ b/include/drm/ttm/ttm_placement.h @@ -47,8 +47,11 @@ * top of the memory area, instead of the bottom. */ -#define TTM_PL_FLAG_CONTIGUOUS (1 << 19) -#define TTM_PL_FLAG_TOPDOWN (1 << 22) +#define TTM_PL_FLAG_CONTIGUOUS (1 << 0) +#define TTM_PL_FLAG_TOPDOWN (1 << 1) + +/* For multihop handling */ +#define TTM_PL_FLAG_TEMPORARY (1 << 2) /** * struct ttm_place diff --git a/include/linux/dma-buf.h b/include/linux/dma-buf.h index efdc56b9d95f..678b2006be78 100644 --- a/include/linux/dma-buf.h +++ b/include/linux/dma-buf.h @@ -96,6 +96,12 @@ struct dma_buf_ops { * This is called automatically for non-dynamic importers from * dma_buf_attach(). * + * Note that similar to non-dynamic exporters in their @map_dma_buf + * callback the driver must guarantee that the memory is available for + * use and cleared of any old data by the time this function returns. + * Drivers which pipeline their buffer moves internally must wait for + * all moves and clears to complete. + * * Returns: * * 0 on success, negative error code on failure. @@ -144,6 +150,15 @@ struct dma_buf_ops { * This is always called with the dmabuf->resv object locked when * the dynamic_mapping flag is true. * + * Note that for non-dynamic exporters the driver must guarantee that + * that the memory is available for use and cleared of any old data by + * the time this function returns. Drivers which pipeline their buffer + * moves internally must wait for all moves and clears to complete. + * Dynamic exporters do not need to follow this rule: For non-dynamic + * importers the buffer is already pinned through @pin, which has the + * same requirements. Dynamic importers otoh are required to obey the + * dma_resv fences. + * * Returns: * * A &sg_table scatter list of or the backing storage of the DMA buffer, @@ -274,27 +289,6 @@ struct dma_buf_ops { /** * struct dma_buf - shared buffer object - * @size: size of the buffer; invariant over the lifetime of the buffer. - * @file: file pointer used for sharing buffers across, and for refcounting. - * @attachments: list of dma_buf_attachment that denotes all devices attached, - * protected by dma_resv lock. - * @ops: dma_buf_ops associated with this buffer object. - * @lock: used internally to serialize list manipulation, attach/detach and - * vmap/unmap - * @vmapping_counter: used internally to refcnt the vmaps - * @vmap_ptr: the current vmap ptr if vmapping_counter > 0 - * @exp_name: name of the exporter; useful for debugging. - * @name: userspace-provided name; useful for accounting and debugging, - * protected by @resv. - * @name_lock: spinlock to protect name access - * @owner: pointer to exporter module; used for refcounting when exporter is a - * kernel module. - * @list_node: node for dma_buf accounting and debugging. - * @priv: exporter specific private data for this buffer object. - * @resv: reservation object linked to this dma-buf - * @poll: for userspace poll support - * @cb_excl: for userspace poll support - * @cb_shared: for userspace poll support * * This represents a shared buffer, created by calling dma_buf_export(). The * userspace representation is a normal file descriptor, which can be created by @@ -306,30 +300,152 @@ struct dma_buf_ops { * Device DMA access is handled by the separate &struct dma_buf_attachment. */ struct dma_buf { + /** + * @size: + * + * Size of the buffer; invariant over the lifetime of the buffer. + */ size_t size; + + /** + * @file: + * + * File pointer used for sharing buffers across, and for refcounting. + * See dma_buf_get() and dma_buf_put(). + */ struct file *file; + + /** + * @attachments: + * + * List of dma_buf_attachment that denotes all devices attached, + * protected by &dma_resv lock @resv. + */ struct list_head attachments; + + /** @ops: dma_buf_ops associated with this buffer object. */ const struct dma_buf_ops *ops; + + /** + * @lock: + * + * Used internally to serialize list manipulation, attach/detach and + * vmap/unmap. Note that in many cases this is superseeded by + * dma_resv_lock() on @resv. + */ struct mutex lock; + + /** + * @vmapping_counter: + * + * Used internally to refcnt the vmaps returned by dma_buf_vmap(). + * Protected by @lock. + */ unsigned vmapping_counter; + + /** + * @vmap_ptr: + * The current vmap ptr if @vmapping_counter > 0. Protected by @lock. + */ struct dma_buf_map vmap_ptr; + + /** + * @exp_name: + * + * Name of the exporter; useful for debugging. See the + * DMA_BUF_SET_NAME IOCTL. + */ const char *exp_name; + + /** + * @name: + * + * Userspace-provided name; useful for accounting and debugging, + * protected by dma_resv_lock() on @resv and @name_lock for read access. + */ const char *name; + + /** @name_lock: Spinlock to protect name acces for read access. */ spinlock_t name_lock; + + /** + * @owner: + * + * Pointer to exporter module; used for refcounting when exporter is a + * kernel module. + */ struct module *owner; + + /** @list_node: node for dma_buf accounting and debugging. */ struct list_head list_node; + + /** @priv: exporter specific private data for this buffer object. */ void *priv; + + /** + * @resv: + * + * Reservation object linked to this dma-buf. + * + * IMPLICIT SYNCHRONIZATION RULES: + * + * Drivers which support implicit synchronization of buffer access as + * e.g. exposed in `Implicit Fence Poll Support`_ must follow the + * below rules. + * + * - Drivers must add a shared fence through dma_resv_add_shared_fence() + * for anything the userspace API considers a read access. This highly + * depends upon the API and window system. + * + * - Similarly drivers must set the exclusive fence through + * dma_resv_add_excl_fence() for anything the userspace API considers + * write access. + * + * - Drivers may just always set the exclusive fence, since that only + * causes unecessarily synchronization, but no correctness issues. + * + * - Some drivers only expose a synchronous userspace API with no + * pipelining across drivers. These do not set any fences for their + * access. An example here is v4l. + * + * DYNAMIC IMPORTER RULES: + * + * Dynamic importers, see dma_buf_attachment_is_dynamic(), have + * additional constraints on how they set up fences: + * + * - Dynamic importers must obey the exclusive fence and wait for it to + * signal before allowing access to the buffer's underlying storage + * through the device. + * + * - Dynamic importers should set fences for any access that they can't + * disable immediately from their &dma_buf_attach_ops.move_notify + * callback. + */ struct dma_resv *resv; - /* poll support */ + /** @poll: for userspace poll support */ wait_queue_head_t poll; + /** @cb_excl: for userspace poll support */ + /** @cb_shared: for userspace poll support */ struct dma_buf_poll_cb_t { struct dma_fence_cb cb; wait_queue_head_t *poll; __poll_t active; } cb_excl, cb_shared; +#ifdef CONFIG_DMABUF_SYSFS_STATS + /** + * @sysfs_entry: + * + * For exposing information about this buffer in sysfs. See also + * `DMA-BUF statistics`_ for the uapi this enables. + */ + struct dma_buf_sysfs_entry { + struct kobject kobj; + struct dma_buf *dmabuf; + } *sysfs_entry; +#endif }; /** diff --git a/include/linux/dma-fence-chain.h b/include/linux/dma-fence-chain.h index 10462a029da2..54fe3443fd2c 100644 --- a/include/linux/dma-fence-chain.h +++ b/include/linux/dma-fence-chain.h @@ -12,25 +12,41 @@ #include <linux/dma-fence.h> #include <linux/irq_work.h> +#include <linux/slab.h> /** * struct dma_fence_chain - fence to represent an node of a fence chain * @base: fence base class - * @lock: spinlock for fence handling * @prev: previous fence of the chain * @prev_seqno: original previous seqno before garbage collection * @fence: encapsulated fence - * @cb: callback structure for signaling - * @work: irq work item for signaling + * @lock: spinlock for fence handling */ struct dma_fence_chain { struct dma_fence base; - spinlock_t lock; struct dma_fence __rcu *prev; u64 prev_seqno; struct dma_fence *fence; - struct dma_fence_cb cb; - struct irq_work work; + union { + /** + * @cb: callback for signaling + * + * This is used to add the callback for signaling the + * complection of the fence chain. Never used at the same time + * as the irq work. + */ + struct dma_fence_cb cb; + + /** + * @work: irq work item for signaling + * + * Irq work structure to allow us to add the callback without + * running into lock inversion. Never used at the same time as + * the callback. + */ + struct irq_work work; + }; + spinlock_t lock; }; extern const struct dma_fence_ops dma_fence_chain_ops; @@ -52,6 +68,30 @@ to_dma_fence_chain(struct dma_fence *fence) } /** + * dma_fence_chain_alloc + * + * Returns a new struct dma_fence_chain object or NULL on failure. + */ +static inline struct dma_fence_chain *dma_fence_chain_alloc(void) +{ + return kmalloc(sizeof(struct dma_fence_chain), GFP_KERNEL); +}; + +/** + * dma_fence_chain_free + * @chain: chain node to free + * + * Frees up an allocated but not used struct dma_fence_chain object. This + * doesn't need an RCU grace period since the fence was never initialized nor + * published. After dma_fence_chain_init() has been called the fence must be + * released by calling dma_fence_put(), and not through this function. + */ +static inline void dma_fence_chain_free(struct dma_fence_chain *chain) +{ + kfree(chain); +}; + +/** * dma_fence_chain_for_each - iterate over all fences in chain * @iter: current fence * @head: starting point diff --git a/include/linux/fb.h b/include/linux/fb.h index ecfbcc0553a5..5950f8f5dc74 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -2,6 +2,7 @@ #ifndef _LINUX_FB_H #define _LINUX_FB_H +#include <linux/refcount.h> #include <linux/kgdb.h> #include <uapi/linux/fb.h> @@ -435,7 +436,7 @@ struct fb_tile_ops { struct fb_info { - atomic_t count; + refcount_t count; int node; int flags; /* diff --git a/include/linux/sysfb.h b/include/linux/sysfb.h new file mode 100644 index 000000000000..b0dcfa26d07b --- /dev/null +++ b/include/linux/sysfb.h @@ -0,0 +1,94 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef _LINUX_SYSFB_H +#define _LINUX_SYSFB_H + +/* + * Generic System Framebuffers on x86 + * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com> + */ + +#include <linux/kernel.h> +#include <linux/platform_data/simplefb.h> +#include <linux/screen_info.h> + +enum { + M_I17, /* 17-Inch iMac */ + M_I20, /* 20-Inch iMac */ + M_I20_SR, /* 20-Inch iMac (Santa Rosa) */ + M_I24, /* 24-Inch iMac */ + M_I24_8_1, /* 24-Inch iMac, 8,1th gen */ + M_I24_10_1, /* 24-Inch iMac, 10,1th gen */ + M_I27_11_1, /* 27-Inch iMac, 11,1th gen */ + M_MINI, /* Mac Mini */ + M_MINI_3_1, /* Mac Mini, 3,1th gen */ + M_MINI_4_1, /* Mac Mini, 4,1th gen */ + M_MB, /* MacBook */ + M_MB_2, /* MacBook, 2nd rev. */ + M_MB_3, /* MacBook, 3rd rev. */ + M_MB_5_1, /* MacBook, 5th rev. */ + M_MB_6_1, /* MacBook, 6th rev. */ + M_MB_7_1, /* MacBook, 7th rev. */ + M_MB_SR, /* MacBook, 2nd gen, (Santa Rosa) */ + M_MBA, /* MacBook Air */ + M_MBA_3, /* Macbook Air, 3rd rev */ + M_MBP, /* MacBook Pro */ + M_MBP_2, /* MacBook Pro 2nd gen */ + M_MBP_2_2, /* MacBook Pro 2,2nd gen */ + M_MBP_SR, /* MacBook Pro (Santa Rosa) */ + M_MBP_4, /* MacBook Pro, 4th gen */ + M_MBP_5_1, /* MacBook Pro, 5,1th gen */ + M_MBP_5_2, /* MacBook Pro, 5,2th gen */ + M_MBP_5_3, /* MacBook Pro, 5,3rd gen */ + M_MBP_6_1, /* MacBook Pro, 6,1th gen */ + M_MBP_6_2, /* MacBook Pro, 6,2th gen */ + M_MBP_7_1, /* MacBook Pro, 7,1th gen */ + M_MBP_8_2, /* MacBook Pro, 8,2nd gen */ + M_UNKNOWN /* placeholder */ +}; + +struct efifb_dmi_info { + char *optname; + unsigned long base; + int stride; + int width; + int height; + int flags; +}; + +#ifdef CONFIG_EFI + +extern struct efifb_dmi_info efifb_dmi_list[]; +void sysfb_apply_efi_quirks(struct platform_device *pd); + +#else /* CONFIG_EFI */ + +static inline void sysfb_apply_efi_quirks(struct platform_device *pd) +{ +} + +#endif /* CONFIG_EFI */ + +#ifdef CONFIG_SYSFB_SIMPLEFB + +bool sysfb_parse_mode(const struct screen_info *si, + struct simplefb_platform_data *mode); +int sysfb_create_simplefb(const struct screen_info *si, + const struct simplefb_platform_data *mode); + +#else /* CONFIG_SYSFB_SIMPLE */ + +static inline bool sysfb_parse_mode(const struct screen_info *si, + struct simplefb_platform_data *mode) +{ + return false; +} + +static inline int sysfb_create_simplefb(const struct screen_info *si, + const struct simplefb_platform_data *mode) +{ + return -EINVAL; +} + +#endif /* CONFIG_SYSFB_SIMPLE */ + +#endif /* _LINUX_SYSFB_H */ diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index dc6ddce92066..b4b9137f9792 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -33,6 +33,8 @@ #include <video/vga.h> +struct pci_dev; + /* Legacy VGA regions */ #define VGA_RSRC_NONE 0x00 #define VGA_RSRC_LEGACY_IO 0x01 @@ -42,42 +44,45 @@ #define VGA_RSRC_NORMAL_IO 0x04 #define VGA_RSRC_NORMAL_MEM 0x08 -/* Passing that instead of a pci_dev to use the system "default" - * device, that is the one used by vgacon. Archs will probably - * have to provide their own vga_default_device(); - */ -#define VGA_DEFAULT_DEVICE (NULL) - -struct pci_dev; - -/* For use by clients */ - -/** - * vga_set_legacy_decoding - * - * @pdev: pci device of the VGA card - * @decodes: bit mask of what legacy regions the card decodes - * - * Indicates to the arbiter if the card decodes legacy VGA IOs, - * legacy VGA Memory, both, or none. All cards default to both, - * the card driver (fbdev for example) should tell the arbiter - * if it has disabled legacy decoding, so the card can be left - * out of the arbitration process (and can be safe to take - * interrupts at any time. - */ -#if defined(CONFIG_VGA_ARB) -extern void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes); -#else +#ifdef CONFIG_VGA_ARB +void vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes); +int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible); +void vga_put(struct pci_dev *pdev, unsigned int rsrc); +struct pci_dev *vga_default_device(void); +void vga_set_default_device(struct pci_dev *pdev); +int vga_remove_vgacon(struct pci_dev *pdev); +int vga_client_register(struct pci_dev *pdev, + unsigned int (*set_decode)(struct pci_dev *pdev, bool state)); +#else /* CONFIG_VGA_ARB */ static inline void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes) { }; -#endif - -#if defined(CONFIG_VGA_ARB) -extern int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible); -#else -static inline int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible) { return 0; } -#endif + unsigned int decodes) +{ +}; +static inline int vga_get(struct pci_dev *pdev, unsigned int rsrc, + int interruptible) +{ + return 0; +} +static inline void vga_put(struct pci_dev *pdev, unsigned int rsrc) +{ +} +static inline struct pci_dev *vga_default_device(void) +{ + return NULL; +} +static inline void vga_set_default_device(struct pci_dev *pdev) +{ +} +static inline int vga_remove_vgacon(struct pci_dev *pdev) +{ + return 0; +} +static inline int vga_client_register(struct pci_dev *pdev, + unsigned int (*set_decode)(struct pci_dev *pdev, bool state)) +{ + return 0; +} +#endif /* CONFIG_VGA_ARB */ /** * vga_get_interruptible @@ -109,48 +114,9 @@ static inline int vga_get_uninterruptible(struct pci_dev *pdev, return vga_get(pdev, rsrc, 0); } -#if defined(CONFIG_VGA_ARB) -extern void vga_put(struct pci_dev *pdev, unsigned int rsrc); -#else -static inline void vga_put(struct pci_dev *pdev, unsigned int rsrc) +static inline void vga_client_unregister(struct pci_dev *pdev) { + vga_client_register(pdev, NULL); } -#endif - - -#ifdef CONFIG_VGA_ARB -extern struct pci_dev *vga_default_device(void); -extern void vga_set_default_device(struct pci_dev *pdev); -extern int vga_remove_vgacon(struct pci_dev *pdev); -#else -static inline struct pci_dev *vga_default_device(void) { return NULL; } -static inline void vga_set_default_device(struct pci_dev *pdev) { } -static inline int vga_remove_vgacon(struct pci_dev *pdev) { return 0; } -#endif - -/* - * Architectures should define this if they have several - * independent PCI domains that can afford concurrent VGA - * decoding - */ -#ifndef __ARCH_HAS_VGA_CONFLICT -static inline int vga_conflicts(struct pci_dev *p1, struct pci_dev *p2) -{ - return 1; -} -#endif - -#if defined(CONFIG_VGA_ARB) -int vga_client_register(struct pci_dev *pdev, void *cookie, - void (*irq_set_state)(void *cookie, bool state), - unsigned int (*set_vga_decode)(void *cookie, bool state)); -#else -static inline int vga_client_register(struct pci_dev *pdev, void *cookie, - void (*irq_set_state)(void *cookie, bool state), - unsigned int (*set_vga_decode)(void *cookie, bool state)) -{ - return 0; -} -#endif #endif /* LINUX_VGA_H */ diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h index d043752a74cf..3b810b53ba8b 100644 --- a/include/uapi/drm/drm.h +++ b/include/uapi/drm/drm.h @@ -635,8 +635,8 @@ struct drm_gem_open { /** * DRM_CAP_VBLANK_HIGH_CRTC * - * If set to 1, the kernel supports specifying a CRTC index in the high bits of - * &drm_wait_vblank_request.type. + * If set to 1, the kernel supports specifying a :ref:`CRTC index<crtc_index>` + * in the high bits of &drm_wait_vblank_request.type. * * Starting kernel version 2.6.39, this capability is always set to 1. */ @@ -1050,6 +1050,16 @@ extern "C" { #define DRM_IOCTL_MODE_GETPROPBLOB DRM_IOWR(0xAC, struct drm_mode_get_blob) #define DRM_IOCTL_MODE_GETFB DRM_IOWR(0xAD, struct drm_mode_fb_cmd) #define DRM_IOCTL_MODE_ADDFB DRM_IOWR(0xAE, struct drm_mode_fb_cmd) +/** + * DRM_IOCTL_MODE_RMFB - Remove a framebuffer. + * + * This removes a framebuffer previously added via ADDFB/ADDFB2. The IOCTL + * argument is a framebuffer object ID. + * + * Warning: removing a framebuffer currently in-use on an enabled plane will + * disable that plane. The CRTC the plane is linked to may also be disabled + * (depending on driver capabilities). + */ #define DRM_IOCTL_MODE_RMFB DRM_IOWR(0xAF, unsigned int) #define DRM_IOCTL_MODE_PAGE_FLIP DRM_IOWR(0xB0, struct drm_mode_crtc_page_flip) #define DRM_IOCTL_MODE_DIRTYFB DRM_IOWR(0xB1, struct drm_mode_fb_dirty_cmd) diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h index f7156322aba5..9f4bb4a6f358 100644 --- a/include/uapi/drm/drm_fourcc.h +++ b/include/uapi/drm/drm_fourcc.h @@ -900,9 +900,9 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) /* * The top 4 bits (out of the 56 bits alloted for specifying vendor specific - * modifiers) denote the category for modifiers. Currently we have only two - * categories of modifiers ie AFBC and MISC. We can have a maximum of sixteen - * different categories. + * modifiers) denote the category for modifiers. Currently we have three + * categories of modifiers ie AFBC, MISC and AFRC. We can have a maximum of + * sixteen different categories. */ #define DRM_FORMAT_MOD_ARM_CODE(__type, __val) \ fourcc_mod_code(ARM, ((__u64)(__type) << 52) | ((__val) & 0x000fffffffffffffULL)) @@ -1018,6 +1018,109 @@ drm_fourcc_canonicalize_nvidia_format_mod(__u64 modifier) #define AFBC_FORMAT_MOD_USM (1ULL << 12) /* + * Arm Fixed-Rate Compression (AFRC) modifiers + * + * AFRC is a proprietary fixed rate image compression protocol and format, + * designed to provide guaranteed bandwidth and memory footprint + * reductions in graphics and media use-cases. + * + * AFRC buffers consist of one or more planes, with the same components + * and meaning as an uncompressed buffer using the same pixel format. + * + * Within each plane, the pixel/luma/chroma values are grouped into + * "coding unit" blocks which are individually compressed to a + * fixed size (in bytes). All coding units within a given plane of a buffer + * store the same number of values, and have the same compressed size. + * + * The coding unit size is configurable, allowing different rates of compression. + * + * The start of each AFRC buffer plane must be aligned to an alignment granule which + * depends on the coding unit size. + * + * Coding Unit Size Plane Alignment + * ---------------- --------------- + * 16 bytes 1024 bytes + * 24 bytes 512 bytes + * 32 bytes 2048 bytes + * + * Coding units are grouped into paging tiles. AFRC buffer dimensions must be aligned + * to a multiple of the paging tile dimensions. + * The dimensions of each paging tile depend on whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Layout Paging Tile Width Paging Tile Height + * ------ ----------------- ------------------ + * SCAN 16 coding units 4 coding units + * ROT 8 coding units 8 coding units + * + * The dimensions of each coding unit depend on the number of components + * in the compressed plane and whether the buffer is optimised for + * scanline (SCAN layout) or rotated (ROT layout) access. + * + * Number of Components in Plane Layout Coding Unit Width Coding Unit Height + * ----------------------------- --------- ----------------- ------------------ + * 1 SCAN 16 samples 4 samples + * Example: 16x4 luma samples in a 'Y' plane + * 16x4 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 1 ROT 8 samples 8 samples + * Example: 8x8 luma samples in a 'Y' plane + * 8x8 chroma 'V' values, in the 'V' plane of a fully-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 2 DONT CARE 8 samples 4 samples + * Example: 8x4 chroma pairs in the 'UV' plane of a semi-planar YUV buffer + * ----------------------------- --------- ----------------- ------------------ + * 3 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer without alpha + * ----------------------------- --------- ----------------- ------------------ + * 4 DONT CARE 4 samples 4 samples + * Example: 4x4 pixels in an RGB buffer with alpha + */ + +#define DRM_FORMAT_MOD_ARM_TYPE_AFRC 0x02 + +#define DRM_FORMAT_MOD_ARM_AFRC(__afrc_mode) \ + DRM_FORMAT_MOD_ARM_CODE(DRM_FORMAT_MOD_ARM_TYPE_AFRC, __afrc_mode) + +/* + * AFRC coding unit size modifier. + * + * Indicates the number of bytes used to store each compressed coding unit for + * one or more planes in an AFRC encoded buffer. The coding unit size for chrominance + * is the same for both Cb and Cr, which may be stored in separate planes. + * + * AFRC_FORMAT_MOD_CU_SIZE_P0 indicates the number of bytes used to store + * each compressed coding unit in the first plane of the buffer. For RGBA buffers + * this is the only plane, while for semi-planar and fully-planar YUV buffers, + * this corresponds to the luma plane. + * + * AFRC_FORMAT_MOD_CU_SIZE_P12 indicates the number of bytes used to store + * each compressed coding unit in the second and third planes in the buffer. + * For semi-planar and fully-planar YUV buffers, this corresponds to the chroma plane(s). + * + * For single-plane buffers, AFRC_FORMAT_MOD_CU_SIZE_P0 must be specified + * and AFRC_FORMAT_MOD_CU_SIZE_P12 must be zero. + * For semi-planar and fully-planar buffers, both AFRC_FORMAT_MOD_CU_SIZE_P0 and + * AFRC_FORMAT_MOD_CU_SIZE_P12 must be specified. + */ +#define AFRC_FORMAT_MOD_CU_SIZE_MASK 0xf +#define AFRC_FORMAT_MOD_CU_SIZE_16 (1ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_24 (2ULL) +#define AFRC_FORMAT_MOD_CU_SIZE_32 (3ULL) + +#define AFRC_FORMAT_MOD_CU_SIZE_P0(__afrc_cu_size) (__afrc_cu_size) +#define AFRC_FORMAT_MOD_CU_SIZE_P12(__afrc_cu_size) ((__afrc_cu_size) << 4) + +/* + * AFRC scanline memory layout. + * + * Indicates if the buffer uses the scanline-optimised layout + * for an AFRC encoded buffer, otherwise, it uses the rotation-optimised layout. + * The memory layout is the same for all planes. + */ +#define AFRC_FORMAT_MOD_LAYOUT_SCAN (1ULL << 8) + +/* * Arm 16x16 Block U-Interleaved modifier * * This is used by Arm Mali Utgard and Midgard GPUs. It divides the image diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index 9b6722d45f36..98bf130feda5 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -312,16 +312,48 @@ struct drm_mode_set_plane { __u32 src_w; }; +/** + * struct drm_mode_get_plane - Get plane metadata. + * + * Userspace can perform a GETPLANE ioctl to retrieve information about a + * plane. + * + * To retrieve the number of formats supported, set @count_format_types to zero + * and call the ioctl. @count_format_types will be updated with the value. + * + * To retrieve these formats, allocate an array with the memory needed to store + * @count_format_types formats. Point @format_type_ptr to this array and call + * the ioctl again (with @count_format_types still set to the value returned in + * the first ioctl call). + */ struct drm_mode_get_plane { + /** + * @plane_id: Object ID of the plane whose information should be + * retrieved. Set by caller. + */ __u32 plane_id; + /** @crtc_id: Object ID of the current CRTC. */ __u32 crtc_id; + /** @fb_id: Object ID of the current fb. */ __u32 fb_id; + /** + * @possible_crtcs: Bitmask of CRTC's compatible with the plane. CRTC's + * are created and they receive an index, which corresponds to their + * position in the bitmask. Bit N corresponds to + * :ref:`CRTC index<crtc_index>` N. + */ __u32 possible_crtcs; + /** @gamma_size: Never used. */ __u32 gamma_size; + /** @count_format_types: Number of formats. */ __u32 count_format_types; + /** + * @format_type_ptr: Pointer to ``__u32`` array of formats that are + * supported by the plane. These formats do not require modifiers. + */ __u64 format_type_ptr; }; diff --git a/include/uapi/drm/v3d_drm.h b/include/uapi/drm/v3d_drm.h index 1ce746e228d9..4104f22fb3d3 100644 --- a/include/uapi/drm/v3d_drm.h +++ b/include/uapi/drm/v3d_drm.h @@ -38,6 +38,9 @@ extern "C" { #define DRM_V3D_GET_BO_OFFSET 0x05 #define DRM_V3D_SUBMIT_TFU 0x06 #define DRM_V3D_SUBMIT_CSD 0x07 +#define DRM_V3D_PERFMON_CREATE 0x08 +#define DRM_V3D_PERFMON_DESTROY 0x09 +#define DRM_V3D_PERFMON_GET_VALUES 0x0a #define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl) #define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo) @@ -47,6 +50,12 @@ extern "C" { #define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset) #define DRM_IOCTL_V3D_SUBMIT_TFU DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_TFU, struct drm_v3d_submit_tfu) #define DRM_IOCTL_V3D_SUBMIT_CSD DRM_IOW(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CSD, struct drm_v3d_submit_csd) +#define DRM_IOCTL_V3D_PERFMON_CREATE DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_CREATE, \ + struct drm_v3d_perfmon_create) +#define DRM_IOCTL_V3D_PERFMON_DESTROY DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_DESTROY, \ + struct drm_v3d_perfmon_destroy) +#define DRM_IOCTL_V3D_PERFMON_GET_VALUES DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_PERFMON_GET_VALUES, \ + struct drm_v3d_perfmon_get_values) #define DRM_V3D_SUBMIT_CL_FLUSH_CACHE 0x01 @@ -127,6 +136,11 @@ struct drm_v3d_submit_cl { __u32 bo_handle_count; __u32 flags; + + /* ID of the perfmon to attach to this job. 0 means no perfmon. */ + __u32 perfmon_id; + + __u32 pad; }; /** @@ -195,6 +209,7 @@ enum drm_v3d_param { DRM_V3D_PARAM_SUPPORTS_TFU, DRM_V3D_PARAM_SUPPORTS_CSD, DRM_V3D_PARAM_SUPPORTS_CACHE_FLUSH, + DRM_V3D_PARAM_SUPPORTS_PERFMON, }; struct drm_v3d_get_param { @@ -258,6 +273,127 @@ struct drm_v3d_submit_csd { __u32 in_sync; /* Sync object to signal when the CSD job is done. */ __u32 out_sync; + + /* ID of the perfmon to attach to this job. 0 means no perfmon. */ + __u32 perfmon_id; +}; + +enum { + V3D_PERFCNT_FEP_VALID_PRIMTS_NO_PIXELS, + V3D_PERFCNT_FEP_VALID_PRIMS, + V3D_PERFCNT_FEP_EZ_NFCLIP_QUADS, + V3D_PERFCNT_FEP_VALID_QUADS, + V3D_PERFCNT_TLB_QUADS_STENCIL_FAIL, + V3D_PERFCNT_TLB_QUADS_STENCILZ_FAIL, + V3D_PERFCNT_TLB_QUADS_STENCILZ_PASS, + V3D_PERFCNT_TLB_QUADS_ZERO_COV, + V3D_PERFCNT_TLB_QUADS_NONZERO_COV, + V3D_PERFCNT_TLB_QUADS_WRITTEN, + V3D_PERFCNT_PTB_PRIM_VIEWPOINT_DISCARD, + V3D_PERFCNT_PTB_PRIM_CLIP, + V3D_PERFCNT_PTB_PRIM_REV, + V3D_PERFCNT_QPU_IDLE_CYCLES, + V3D_PERFCNT_QPU_ACTIVE_CYCLES_VERTEX_COORD_USER, + V3D_PERFCNT_QPU_ACTIVE_CYCLES_FRAG, + V3D_PERFCNT_QPU_CYCLES_VALID_INSTR, + V3D_PERFCNT_QPU_CYCLES_TMU_STALL, + V3D_PERFCNT_QPU_CYCLES_SCOREBOARD_STALL, + V3D_PERFCNT_QPU_CYCLES_VARYINGS_STALL, + V3D_PERFCNT_QPU_IC_HIT, + V3D_PERFCNT_QPU_IC_MISS, + V3D_PERFCNT_QPU_UC_HIT, + V3D_PERFCNT_QPU_UC_MISS, + V3D_PERFCNT_TMU_TCACHE_ACCESS, + V3D_PERFCNT_TMU_TCACHE_MISS, + V3D_PERFCNT_VPM_VDW_STALL, + V3D_PERFCNT_VPM_VCD_STALL, + V3D_PERFCNT_BIN_ACTIVE, + V3D_PERFCNT_RDR_ACTIVE, + V3D_PERFCNT_L2T_HITS, + V3D_PERFCNT_L2T_MISSES, + V3D_PERFCNT_CYCLE_COUNT, + V3D_PERFCNT_QPU_CYCLES_STALLED_VERTEX_COORD_USER, + V3D_PERFCNT_QPU_CYCLES_STALLED_FRAGMENT, + V3D_PERFCNT_PTB_PRIMS_BINNED, + V3D_PERFCNT_AXI_WRITES_WATCH_0, + V3D_PERFCNT_AXI_READS_WATCH_0, + V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_0, + V3D_PERFCNT_AXI_READ_STALLS_WATCH_0, + V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_0, + V3D_PERFCNT_AXI_READ_BYTES_WATCH_0, + V3D_PERFCNT_AXI_WRITES_WATCH_1, + V3D_PERFCNT_AXI_READS_WATCH_1, + V3D_PERFCNT_AXI_WRITE_STALLS_WATCH_1, + V3D_PERFCNT_AXI_READ_STALLS_WATCH_1, + V3D_PERFCNT_AXI_WRITE_BYTES_WATCH_1, + V3D_PERFCNT_AXI_READ_BYTES_WATCH_1, + V3D_PERFCNT_TLB_PARTIAL_QUADS, + V3D_PERFCNT_TMU_CONFIG_ACCESSES, + V3D_PERFCNT_L2T_NO_ID_STALL, + V3D_PERFCNT_L2T_COM_QUE_STALL, + V3D_PERFCNT_L2T_TMU_WRITES, + V3D_PERFCNT_TMU_ACTIVE_CYCLES, + V3D_PERFCNT_TMU_STALLED_CYCLES, + V3D_PERFCNT_CLE_ACTIVE, + V3D_PERFCNT_L2T_TMU_READS, + V3D_PERFCNT_L2T_CLE_READS, + V3D_PERFCNT_L2T_VCD_READS, + V3D_PERFCNT_L2T_TMUCFG_READS, + V3D_PERFCNT_L2T_SLC0_READS, + V3D_PERFCNT_L2T_SLC1_READS, + V3D_PERFCNT_L2T_SLC2_READS, + V3D_PERFCNT_L2T_TMU_W_MISSES, + V3D_PERFCNT_L2T_TMU_R_MISSES, + V3D_PERFCNT_L2T_CLE_MISSES, + V3D_PERFCNT_L2T_VCD_MISSES, + V3D_PERFCNT_L2T_TMUCFG_MISSES, + V3D_PERFCNT_L2T_SLC0_MISSES, + V3D_PERFCNT_L2T_SLC1_MISSES, + V3D_PERFCNT_L2T_SLC2_MISSES, + V3D_PERFCNT_CORE_MEM_WRITES, + V3D_PERFCNT_L2T_MEM_WRITES, + V3D_PERFCNT_PTB_MEM_WRITES, + V3D_PERFCNT_TLB_MEM_WRITES, + V3D_PERFCNT_CORE_MEM_READS, + V3D_PERFCNT_L2T_MEM_READS, + V3D_PERFCNT_PTB_MEM_READS, + V3D_PERFCNT_PSE_MEM_READS, + V3D_PERFCNT_TLB_MEM_READS, + V3D_PERFCNT_GMP_MEM_READS, + V3D_PERFCNT_PTB_W_MEM_WORDS, + V3D_PERFCNT_TLB_W_MEM_WORDS, + V3D_PERFCNT_PSE_R_MEM_WORDS, + V3D_PERFCNT_TLB_R_MEM_WORDS, + V3D_PERFCNT_TMU_MRU_HITS, + V3D_PERFCNT_COMPUTE_ACTIVE, + V3D_PERFCNT_NUM, +}; + +#define DRM_V3D_MAX_PERF_COUNTERS 32 + +struct drm_v3d_perfmon_create { + __u32 id; + __u32 ncounters; + __u8 counters[DRM_V3D_MAX_PERF_COUNTERS]; +}; + +struct drm_v3d_perfmon_destroy { + __u32 id; +}; + +/* + * Returns the values of the performance counters tracked by this + * perfmon (as an array of ncounters u64 values). + * + * No implicit synchronization is performed, so the user has to + * guarantee that any jobs using this perfmon have already been + * completed (probably by blocking on the seqno returned by the + * last exec that used the perfmon). + */ +struct drm_v3d_perfmon_get_values { + __u32 id; + __u32 pad; + __u64 values_ptr; }; #if defined(__cplusplus) diff --git a/include/uapi/drm/vmwgfx_drm.h b/include/uapi/drm/vmwgfx_drm.h index 02e917507479..9078775feb51 100644 --- a/include/uapi/drm/vmwgfx_drm.h +++ b/include/uapi/drm/vmwgfx_drm.h @@ -72,6 +72,9 @@ extern "C" { #define DRM_VMW_GB_SURFACE_CREATE_EXT 27 #define DRM_VMW_GB_SURFACE_REF_EXT 28 #define DRM_VMW_MSG 29 +#define DRM_VMW_MKSSTAT_RESET 30 +#define DRM_VMW_MKSSTAT_ADD 31 +#define DRM_VMW_MKSSTAT_REMOVE 32 /*************************************************************************/ /** @@ -1236,6 +1239,44 @@ struct drm_vmw_msg_arg { __u32 receive_len; }; +/** + * struct drm_vmw_mksstat_add_arg + * + * @stat: Pointer to user-space stat-counters array, page-aligned. + * @info: Pointer to user-space counter-infos array, page-aligned. + * @strs: Pointer to user-space stat strings, page-aligned. + * @stat_len: Length in bytes of stat-counters array. + * @info_len: Length in bytes of counter-infos array. + * @strs_len: Length in bytes of the stat strings, terminators included. + * @description: Pointer to instance descriptor string; will be truncated + * to MKS_GUEST_STAT_INSTANCE_DESC_LENGTH chars. + * @id: Output identifier of the produced record; -1 if error. + * + * Argument to the DRM_VMW_MKSSTAT_ADD ioctl. + */ +struct drm_vmw_mksstat_add_arg { + __u64 stat; + __u64 info; + __u64 strs; + __u64 stat_len; + __u64 info_len; + __u64 strs_len; + __u64 description; + __u64 id; +}; + +/** + * struct drm_vmw_mksstat_remove_arg + * + * @id: Identifier of the record being disposed, originally obtained through + * DRM_VMW_MKSSTAT_ADD ioctl. + * + * Argument to the DRM_VMW_MKSSTAT_REMOVE ioctl. + */ +struct drm_vmw_mksstat_remove_arg { + __u64 id; +}; + #if defined(__cplusplus) } #endif diff --git a/include/uapi/linux/dma-buf.h b/include/uapi/linux/dma-buf.h index 7f30393b92c3..8e4a2ca0bcbf 100644 --- a/include/uapi/linux/dma-buf.h +++ b/include/uapi/linux/dma-buf.h @@ -22,8 +22,56 @@ #include <linux/types.h> -/* begin/end dma-buf functions used for userspace mmap. */ +/** + * struct dma_buf_sync - Synchronize with CPU access. + * + * When a DMA buffer is accessed from the CPU via mmap, it is not always + * possible to guarantee coherency between the CPU-visible map and underlying + * memory. To manage coherency, DMA_BUF_IOCTL_SYNC must be used to bracket + * any CPU access to give the kernel the chance to shuffle memory around if + * needed. + * + * Prior to accessing the map, the client must call DMA_BUF_IOCTL_SYNC + * with DMA_BUF_SYNC_START and the appropriate read/write flags. Once the + * access is complete, the client should call DMA_BUF_IOCTL_SYNC with + * DMA_BUF_SYNC_END and the same read/write flags. + * + * The synchronization provided via DMA_BUF_IOCTL_SYNC only provides cache + * coherency. It does not prevent other processes or devices from + * accessing the memory at the same time. If synchronization with a GPU or + * other device driver is required, it is the client's responsibility to + * wait for buffer to be ready for reading or writing before calling this + * ioctl with DMA_BUF_SYNC_START. Likewise, the client must ensure that + * follow-up work is not submitted to GPU or other device driver until + * after this ioctl has been called with DMA_BUF_SYNC_END? + * + * If the driver or API with which the client is interacting uses implicit + * synchronization, waiting for prior work to complete can be done via + * poll() on the DMA buffer file descriptor. If the driver or API requires + * explicit synchronization, the client may have to wait on a sync_file or + * other synchronization primitive outside the scope of the DMA buffer API. + */ struct dma_buf_sync { + /** + * @flags: Set of access flags + * + * DMA_BUF_SYNC_START: + * Indicates the start of a map access session. + * + * DMA_BUF_SYNC_END: + * Indicates the end of a map access session. + * + * DMA_BUF_SYNC_READ: + * Indicates that the mapped DMA buffer will be read by the + * client via the CPU map. + * + * DMA_BUF_SYNC_WRITE: + * Indicates that the mapped DMA buffer will be written by the + * client via the CPU map. + * + * DMA_BUF_SYNC_RW: + * An alias for DMA_BUF_SYNC_READ | DMA_BUF_SYNC_WRITE. + */ __u64 flags; }; |