diff options
Diffstat (limited to 'include')
-rw-r--r-- | include/drm/drm_mipi_dsi.h | 21 | ||||
-rw-r--r-- | include/drm/drm_panel.h | 58 |
2 files changed, 73 insertions, 6 deletions
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h index 944f33f8ba38..2bb55b8b9031 100644 --- a/include/drm/drm_mipi_dsi.h +++ b/include/drm/drm_mipi_dsi.h @@ -94,6 +94,8 @@ void mipi_dsi_host_unregister(struct mipi_dsi_host *host); #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) /* disable EoT packets in HS mode */ #define MIPI_DSI_MODE_EOT_PACKET BIT(9) +/* device supports non-continuous clock behavior (DSI spec 5.6.1) */ +#define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) enum mipi_dsi_pixel_format { MIPI_DSI_FMT_RGB888, @@ -121,14 +123,17 @@ struct mipi_dsi_device { unsigned long mode_flags; }; -#define to_mipi_dsi_device(d) container_of(d, struct mipi_dsi_device, dev) +static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) +{ + return container_of(dev, struct mipi_dsi_device, dev); +} int mipi_dsi_attach(struct mipi_dsi_device *dsi); int mipi_dsi_detach(struct mipi_dsi_device *dsi); -int mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, unsigned int channel, - const void *data, size_t len); -ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, unsigned int channel, - u8 cmd, void *data, size_t len); +ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, const void *data, + size_t len); +ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, + size_t len); /** * struct mipi_dsi_driver - DSI driver @@ -144,7 +149,11 @@ struct mipi_dsi_driver { void (*shutdown)(struct mipi_dsi_device *dsi); }; -#define to_mipi_dsi_driver(d) container_of(d, struct mipi_dsi_driver, driver) +static inline struct mipi_dsi_driver * +to_mipi_dsi_driver(struct device_driver *driver) +{ + return container_of(driver, struct mipi_dsi_driver, driver); +} static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) { diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h index c2ab77add67c..1fbcc96063a7 100644 --- a/include/drm/drm_panel.h +++ b/include/drm/drm_panel.h @@ -30,8 +30,42 @@ struct drm_connector; struct drm_device; struct drm_panel; +/** + * struct drm_panel_funcs - perform operations on a given panel + * @disable: disable panel (turn off back light, etc.) + * @unprepare: turn off panel + * @prepare: turn on panel and perform set up + * @enable: enable panel (turn on back light, etc.) + * @get_modes: add modes to the connector that the panel is attached to and + * return the number of modes added + * + * The .prepare() function is typically called before the display controller + * starts to transmit video data. Panel drivers can use this to turn the panel + * on and wait for it to become ready. If additional configuration is required + * (via a control bus such as I2C, SPI or DSI for example) this is a good time + * to do that. + * + * After the display controller has started transmitting video data, it's safe + * to call the .enable() function. This will typically enable the backlight to + * make the image on screen visible. Some panels require a certain amount of + * time or frames before the image is displayed. This function is responsible + * for taking this into account before enabling the backlight to avoid visual + * glitches. + * + * Before stopping video transmission from the display controller it can be + * necessary to turn off the panel to avoid visual glitches. This is done in + * the .disable() function. Analogously to .enable() this typically involves + * turning off the backlight and waiting for some time to make sure no image + * is visible on the panel. It is then safe for the display controller to + * cease transmission of video data. + * + * To save power when no video data is transmitted, a driver can power down + * the panel. This is the job of the .unprepare() function. + */ struct drm_panel_funcs { int (*disable)(struct drm_panel *panel); + int (*unprepare)(struct drm_panel *panel); + int (*prepare)(struct drm_panel *panel); int (*enable)(struct drm_panel *panel); int (*get_modes)(struct drm_panel *panel); }; @@ -46,6 +80,14 @@ struct drm_panel { struct list_head list; }; +static inline int drm_panel_unprepare(struct drm_panel *panel) +{ + if (panel && panel->funcs && panel->funcs->unprepare) + return panel->funcs->unprepare(panel); + + return panel ? -ENOSYS : -EINVAL; +} + static inline int drm_panel_disable(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->disable) @@ -54,6 +96,14 @@ static inline int drm_panel_disable(struct drm_panel *panel) return panel ? -ENOSYS : -EINVAL; } +static inline int drm_panel_prepare(struct drm_panel *panel) +{ + if (panel && panel->funcs && panel->funcs->prepare) + return panel->funcs->prepare(panel); + + return panel ? -ENOSYS : -EINVAL; +} + static inline int drm_panel_enable(struct drm_panel *panel) { if (panel && panel->funcs && panel->funcs->enable) @@ -62,6 +112,14 @@ static inline int drm_panel_enable(struct drm_panel *panel) return panel ? -ENOSYS : -EINVAL; } +static inline int drm_panel_get_modes(struct drm_panel *panel) +{ + if (panel && panel->funcs && panel->funcs->get_modes) + return panel->funcs->get_modes(panel); + + return panel ? -ENOSYS : -EINVAL; +} + void drm_panel_init(struct drm_panel *panel); int drm_panel_add(struct drm_panel *panel); |