diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/scmi_protocol.h | 134 | ||||
| -rw-r--r-- | include/trace/events/scmi.h | 56 |
2 files changed, 190 insertions, 0 deletions
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 704111f63993..7f4f9df1b20f 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -561,6 +561,116 @@ struct scmi_voltage_proto_ops { }; /** + * struct scmi_powercap_info - Describe one available Powercap domain + * + * @id: Domain ID as advertised by the platform. + * @notify_powercap_cap_change: CAP change notification support. + * @notify_powercap_measurement_change: MEASUREMENTS change notifications + * support. + * @async_powercap_cap_set: Asynchronous CAP set support. + * @powercap_cap_config: CAP configuration support. + * @powercap_monitoring: Monitoring (measurements) support. + * @powercap_pai_config: PAI configuration support. + * @powercap_scale_mw: Domain reports power data in milliwatt units. + * @powercap_scale_uw: Domain reports power data in microwatt units. + * Note that, when both @powercap_scale_mw and + * @powercap_scale_uw are set to false, the domain + * reports power data on an abstract linear scale. + * @name: name assigned to the Powercap Domain by platform. + * @min_pai: Minimum configurable PAI. + * @max_pai: Maximum configurable PAI. + * @pai_step: Step size between two consecutive PAI values. + * @min_power_cap: Minimum configurable CAP. + * @max_power_cap: Maximum configurable CAP. + * @power_cap_step: Step size between two consecutive CAP values. + * @sustainable_power: Maximum sustainable power consumption for this domain + * under normal conditions. + * @accuracy: The accuracy with which the power is measured and reported in + * integral multiples of 0.001 percent. + * @parent_id: Identifier of the containing parent power capping domain, or the + * value 0xFFFFFFFF if this powercap domain is a root domain not + * contained in any other domain. + */ +struct scmi_powercap_info { + unsigned int id; + bool notify_powercap_cap_change; + bool notify_powercap_measurement_change; + bool async_powercap_cap_set; + bool powercap_cap_config; + bool powercap_monitoring; + bool powercap_pai_config; + bool powercap_scale_mw; + bool powercap_scale_uw; + bool fastchannels; + char name[SCMI_MAX_STR_SIZE]; + unsigned int min_pai; + unsigned int max_pai; + unsigned int pai_step; + unsigned int min_power_cap; + unsigned int max_power_cap; + unsigned int power_cap_step; + unsigned int sustainable_power; + unsigned int accuracy; +#define SCMI_POWERCAP_ROOT_ZONE_ID 0xFFFFFFFFUL + unsigned int parent_id; + struct scmi_fc_info *fc_info; +}; + +/** + * struct scmi_powercap_proto_ops - represents the various operations provided + * by SCMI Powercap Protocol + * + * @num_domains_get: get the count of powercap domains provided by SCMI. + * @info_get: get the information for the specified domain. + * @cap_get: get the current CAP value for the specified domain. + * @cap_set: set the CAP value for the specified domain to the provided value; + * if the domain supports setting the CAP with an asynchronous command + * this request will finally trigger an asynchronous transfer, but, if + * @ignore_dresp here is set to true, this call will anyway return + * immediately without waiting for the related delayed response. + * @pai_get: get the current PAI value for the specified domain. + * @pai_set: set the PAI value for the specified domain to the provided value. + * @measurements_get: retrieve the current average power measurements for the + * specified domain and the related PAI upon which is + * calculated. + * @measurements_threshold_set: set the desired low and high power thresholds + * to be used when registering for notification + * of type POWERCAP_MEASUREMENTS_NOTIFY with this + * powercap domain. + * Note that this must be called at least once + * before registering any callback with the usual + * @scmi_notify_ops; moreover, in case this method + * is called with measurement notifications already + * enabled it will also trigger, transparently, a + * proper update of the power thresholds configured + * in the SCMI backend server. + * @measurements_threshold_get: get the currently configured low and high power + * thresholds used when registering callbacks for + * notification POWERCAP_MEASUREMENTS_NOTIFY. + */ +struct scmi_powercap_proto_ops { + int (*num_domains_get)(const struct scmi_protocol_handle *ph); + const struct scmi_powercap_info __must_check *(*info_get) + (const struct scmi_protocol_handle *ph, u32 domain_id); + int (*cap_get)(const struct scmi_protocol_handle *ph, u32 domain_id, + u32 *power_cap); + int (*cap_set)(const struct scmi_protocol_handle *ph, u32 domain_id, + u32 power_cap, bool ignore_dresp); + int (*pai_get)(const struct scmi_protocol_handle *ph, u32 domain_id, + u32 *pai); + int (*pai_set)(const struct scmi_protocol_handle *ph, u32 domain_id, + u32 pai); + int (*measurements_get)(const struct scmi_protocol_handle *ph, + u32 domain_id, u32 *average_power, u32 *pai); + int (*measurements_threshold_set)(const struct scmi_protocol_handle *ph, + u32 domain_id, u32 power_thresh_low, + u32 power_thresh_high); + int (*measurements_threshold_get)(const struct scmi_protocol_handle *ph, + u32 domain_id, u32 *power_thresh_low, + u32 *power_thresh_high); +}; + +/** * struct scmi_notify_ops - represents notifications' operations provided by * SCMI core * @devm_event_notifier_register: Managed registration of a notifier_block for @@ -624,6 +734,9 @@ struct scmi_notify_ops { * * @dev: pointer to the SCMI device * @version: pointer to the structure containing SCMI version information + * @devm_protocol_acquire: devres managed method to get hold of a protocol, + * causing its initialization and related resource + * accounting * @devm_protocol_get: devres managed method to acquire a protocol and get specific * operations and a dedicated protocol handler * @devm_protocol_put: devres managed method to release a protocol @@ -642,6 +755,8 @@ struct scmi_handle { struct device *dev; struct scmi_revision_info *version; + int __must_check (*devm_protocol_acquire)(struct scmi_device *sdev, + u8 proto); const void __must_check * (*devm_protocol_get)(struct scmi_device *sdev, u8 proto, struct scmi_protocol_handle **ph); @@ -661,6 +776,7 @@ enum scmi_std_protocol { SCMI_PROTOCOL_SENSOR = 0x15, SCMI_PROTOCOL_RESET = 0x16, SCMI_PROTOCOL_VOLTAGE = 0x17, + SCMI_PROTOCOL_POWERCAP = 0x18, }; enum scmi_system_events { @@ -762,6 +878,8 @@ enum scmi_notification_events { SCMI_EVENT_RESET_ISSUED = 0x0, SCMI_EVENT_BASE_ERROR_EVENT = 0x0, SCMI_EVENT_SYSTEM_POWER_STATE_NOTIFIER = 0x0, + SCMI_EVENT_POWERCAP_CAP_CHANGED = 0x0, + SCMI_EVENT_POWERCAP_MEASUREMENTS_CHANGED = 0x1, }; struct scmi_power_state_changed_report { @@ -781,8 +899,10 @@ struct scmi_clock_rate_notif_report { struct scmi_system_power_state_notifier_report { ktime_t timestamp; unsigned int agent_id; +#define SCMI_SYSPOWER_IS_REQUEST_GRACEFUL(flags) ((flags) & BIT(0)) unsigned int flags; unsigned int system_state; + unsigned int timeout; }; struct scmi_perf_limits_report { @@ -830,4 +950,18 @@ struct scmi_base_error_report { unsigned long long reports[]; }; +struct scmi_powercap_cap_changed_report { + ktime_t timestamp; + unsigned int agent_id; + unsigned int domain_id; + unsigned int power_cap; + unsigned int pai; +}; + +struct scmi_powercap_meas_changed_report { + ktime_t timestamp; + unsigned int agent_id; + unsigned int domain_id; + unsigned int power; +}; #endif /* _LINUX_SCMI_PROTOCOL_H */ diff --git a/include/trace/events/scmi.h b/include/trace/events/scmi.h index cee4b2b64ae4..65016a767b7a 100644 --- a/include/trace/events/scmi.h +++ b/include/trace/events/scmi.h @@ -7,6 +7,31 @@ #include <linux/tracepoint.h> +TRACE_EVENT(scmi_fc_call, + TP_PROTO(u8 protocol_id, u8 msg_id, u32 res_id, u32 val1, u32 val2), + TP_ARGS(protocol_id, msg_id, res_id, val1, val2), + + TP_STRUCT__entry( + __field(u8, protocol_id) + __field(u8, msg_id) + __field(u32, res_id) + __field(u32, val1) + __field(u32, val2) + ), + + TP_fast_assign( + __entry->protocol_id = protocol_id; + __entry->msg_id = msg_id; + __entry->res_id = res_id; + __entry->val1 = val1; + __entry->val2 = val2; + ), + + TP_printk("[0x%02X]:[0x%02X]:[%08X]:%u:%u", + __entry->protocol_id, __entry->msg_id, + __entry->res_id, __entry->val1, __entry->val2) +); + TRACE_EVENT(scmi_xfer_begin, TP_PROTO(int transfer_id, u8 msg_id, u8 protocol_id, u16 seq, bool poll), @@ -112,6 +137,37 @@ TRACE_EVENT(scmi_rx_done, __entry->transfer_id, __entry->msg_id, __entry->protocol_id, __entry->seq, __entry->msg_type) ); + +TRACE_EVENT(scmi_msg_dump, + TP_PROTO(u8 protocol_id, u8 msg_id, unsigned char *tag, u16 seq, + int status, void *buf, size_t len), + TP_ARGS(protocol_id, msg_id, tag, seq, status, buf, len), + + TP_STRUCT__entry( + __field(u8, protocol_id) + __field(u8, msg_id) + __array(char, tag, 5) + __field(u16, seq) + __field(int, status) + __field(size_t, len) + __dynamic_array(unsigned char, cmd, len) + ), + + TP_fast_assign( + __entry->protocol_id = protocol_id; + __entry->msg_id = msg_id; + strscpy(__entry->tag, tag, 5); + __entry->seq = seq; + __entry->status = status; + __entry->len = len; + memcpy(__get_dynamic_array(cmd), buf, __entry->len); + ), + + TP_printk("pt=%02X t=%s msg_id=%02X seq=%04X s=%d pyld=%s", + __entry->protocol_id, __entry->tag, __entry->msg_id, + __entry->seq, __entry->status, + __print_hex_str(__get_dynamic_array(cmd), __entry->len)) +); #endif /* _TRACE_SCMI_H */ /* This part must be outside protection */ |