diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/gpio.h | 23 | ||||
| -rw-r--r-- | include/linux/gpio/driver.h | 7 | ||||
| -rw-r--r-- | include/linux/mfd/tps65010.h | 11 | ||||
| -rw-r--r-- | include/linux/mfd/twl.h | 3 | ||||
| -rw-r--r-- | include/linux/platform_data/lcd-mipid.h | 2 | ||||
| -rw-r--r-- | include/linux/platform_data/mmc-omap.h | 2 | ||||
| -rw-r--r-- | include/linux/spi/ads7846.h | 2 | ||||
| -rw-r--r-- | include/linux/usb/musb.h | 13 |
8 files changed, 4 insertions, 59 deletions
diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 8528353e073b..7ecc25c543ce 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -32,17 +32,6 @@ struct device; /* Gpio pin is active-low */ #define GPIOF_ACTIVE_LOW (1 << 2) -/* Gpio pin is open drain */ -#define GPIOF_OPEN_DRAIN (1 << 3) - -/* Gpio pin is open source */ -#define GPIOF_OPEN_SOURCE (1 << 4) - -#define GPIOF_EXPORT (1 << 5) -#define GPIOF_EXPORT_CHANGEABLE (1 << 6) -#define GPIOF_EXPORT_DIR_FIXED (GPIOF_EXPORT) -#define GPIOF_EXPORT_DIR_CHANGEABLE (GPIOF_EXPORT | GPIOF_EXPORT_CHANGEABLE) - /** * struct gpio - a structure describing a GPIO with configuration * @gpio: the GPIO number @@ -119,11 +108,6 @@ static inline void gpio_set_value(unsigned gpio, int value) return gpiod_set_raw_value(gpio_to_desc(gpio), value); } -static inline int gpio_cansleep(unsigned gpio) -{ - return gpiod_cansleep(gpio_to_desc(gpio)); -} - static inline int gpio_to_irq(unsigned gpio) { return gpiod_to_irq(gpio_to_desc(gpio)); @@ -206,13 +190,6 @@ static inline void gpio_set_value(unsigned gpio, int value) WARN_ON(1); } -static inline int gpio_cansleep(unsigned gpio) -{ - /* GPIO can never have been requested or set as {in,out}put */ - WARN_ON(1); - return 0; -} - static inline int gpio_get_value_cansleep(unsigned gpio) { /* GPIO can never have been requested or set as {in,out}put */ diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 67b8774eed8f..4f0c5d62c8f3 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -61,13 +61,6 @@ struct gpio_irq_chip { */ struct irq_domain *domain; - /** - * @domain_ops: - * - * Table of interrupt domain operations for this IRQ chip. - */ - const struct irq_domain_ops *domain_ops; - #ifdef CONFIG_IRQ_DOMAIN_HIERARCHY /** * @fwnode: diff --git a/include/linux/mfd/tps65010.h b/include/linux/mfd/tps65010.h index a1fb9bc5311d..5edf1aef1118 100644 --- a/include/linux/mfd/tps65010.h +++ b/include/linux/mfd/tps65010.h @@ -28,6 +28,8 @@ #ifndef __LINUX_I2C_TPS65010_H #define __LINUX_I2C_TPS65010_H +struct gpio_chip; + /* * ---------------------------------------------------------------------------- * Registers, all 8 bits @@ -176,12 +178,10 @@ struct i2c_client; /** * struct tps65010_board - packages GPIO and LED lines - * @base: the GPIO number to assign to GPIO-1 * @outmask: bit (N-1) is set to allow GPIO-N to be used as an * (open drain) output * @setup: optional callback issued once the GPIOs are valid * @teardown: optional callback issued before the GPIOs are invalidated - * @context: optional parameter passed to setup() and teardown() * * Board data may be used to package the GPIO (and LED) lines for use * in by the generic GPIO and LED frameworks. The first four GPIOs @@ -193,12 +193,9 @@ struct i2c_client; * devices in their initial states using these GPIOs. */ struct tps65010_board { - int base; unsigned outmask; - - int (*setup)(struct i2c_client *client, void *context); - int (*teardown)(struct i2c_client *client, void *context); - void *context; + int (*setup)(struct i2c_client *client, struct gpio_chip *gc); + void (*teardown)(struct i2c_client *client, struct gpio_chip *gc); }; #endif /* __LINUX_I2C_TPS65010_H */ diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h index 6e3d99b7a0ee..c062d91a67d9 100644 --- a/include/linux/mfd/twl.h +++ b/include/linux/mfd/twl.h @@ -593,9 +593,6 @@ struct twl4030_gpio_platform_data { */ u32 pullups; u32 pulldowns; - - int (*setup)(struct device *dev, - unsigned gpio, unsigned ngpio); }; struct twl4030_madc_platform_data { diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 91051e9907f3..054d0c3c5ec5 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -20,8 +20,6 @@ struct omap_mmc_platform_data { * maximum frequency on the MMC bus */ unsigned int max_freq; - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); /* initialize board-specific MMC functionality, can be NULL if * not supported */ int (*init)(struct device *dev); diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index d424c1aadf38..a04c1c34c344 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -35,8 +35,6 @@ struct ads7846_platform_data { u16 debounce_tol; /* tolerance used for filtering */ u16 debounce_rep; /* additional consecutive good readings * required after the first two */ - int gpio_pendown; /* the GPIO used to decide the pendown - * state if get_pendown_state == NULL */ int gpio_pendown_debounce; /* platform specific debounce time for * the gpio_pendown */ int (*get_pendown_state)(void); diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index e4a3ad3c800f..3963e55e88a3 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -99,9 +99,6 @@ struct musb_hdrc_platform_data { /* (HOST or OTG) program PHY for external Vbus */ unsigned extvbus:1; - /* Power the device on or off */ - int (*set_power)(int state); - /* MUSB configuration-specific details */ const struct musb_hdrc_config *config; @@ -135,14 +132,4 @@ static inline int musb_mailbox(enum musb_vbus_id_status status) #define TUSB6010_REFCLK_24 41667 /* psec/clk @ 24.0 MHz XI */ #define TUSB6010_REFCLK_19 52083 /* psec/clk @ 19.2 MHz CLKIN */ -#ifdef CONFIG_ARCH_OMAP2 - -extern int __init tusb6010_setup_interface( - struct musb_hdrc_platform_data *data, - unsigned ps_refclk, unsigned waitpin, - unsigned async_cs, unsigned sync_cs, - unsigned irq, unsigned dmachan); - -#endif /* OMAP2 */ - #endif /* __LINUX_USB_MUSB_H */ |