summaryrefslogtreecommitdiff
path: root/init
diff options
context:
space:
mode:
Diffstat (limited to 'init')
-rw-r--r--init/Kconfig107
-rw-r--r--init/calibrate.c11
-rw-r--r--init/do_mounts_rd.c10
-rw-r--r--init/initramfs.c60
-rw-r--r--init/main.c23
5 files changed, 176 insertions, 35 deletions
diff --git a/init/Kconfig b/init/Kconfig
index 6069b210d83a..e25a82a291a6 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -783,8 +783,13 @@ endchoice
endmenu # "RCU Subsystem"
+config BUILD_BIN2C
+ bool
+ default n
+
config IKCONFIG
tristate "Kernel .config support"
+ select BUILD_BIN2C
---help---
This option enables the complete Linux kernel ".config" file
contents to be saved in the kernel. It provides documentation
@@ -806,16 +811,56 @@ config LOG_BUF_SHIFT
int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
range 12 21
default 17
+ depends on PRINTK
help
- Select kernel log buffer size as a power of 2.
+ Select the minimal kernel log buffer size as a power of 2.
+ The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
+ parameter, see below. Any higher size also might be forced
+ by "log_buf_len" boot parameter.
+
Examples:
- 17 => 128 KB
+ 17 => 128 KB
16 => 64 KB
- 15 => 32 KB
- 14 => 16 KB
+ 15 => 32 KB
+ 14 => 16 KB
13 => 8 KB
12 => 4 KB
+config LOG_CPU_MAX_BUF_SHIFT
+ int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
+ range 0 21
+ default 12 if !BASE_SMALL
+ default 0 if BASE_SMALL
+ depends on PRINTK
+ help
+ This option allows to increase the default ring buffer size
+ according to the number of CPUs. The value defines the contribution
+ of each CPU as a power of 2. The used space is typically only few
+ lines however it might be much more when problems are reported,
+ e.g. backtraces.
+
+ The increased size means that a new buffer has to be allocated and
+ the original static one is unused. It makes sense only on systems
+ with more CPUs. Therefore this value is used only when the sum of
+ contributions is greater than the half of the default kernel ring
+ buffer as defined by LOG_BUF_SHIFT. The default values are set
+ so that more than 64 CPUs are needed to trigger the allocation.
+
+ Also this option is ignored when "log_buf_len" kernel parameter is
+ used as it forces an exact (power of two) size of the ring buffer.
+
+ The number of possible CPUs is used for this computation ignoring
+ hotplugging making the compuation optimal for the the worst case
+ scenerio while allowing a simple algorithm to be used from bootup.
+
+ Examples shift values and their meaning:
+ 17 => 128 KB for each CPU
+ 16 => 64 KB for each CPU
+ 15 => 32 KB for each CPU
+ 14 => 16 KB for each CPU
+ 13 => 8 KB for each CPU
+ 12 => 4 KB for each CPU
+
#
# Architectures with an unreliable sched_clock() should select this:
#
@@ -1432,6 +1477,7 @@ config FUTEX
config HAVE_FUTEX_CMPXCHG
bool
+ depends on FUTEX
help
Architectures should select this if futex_atomic_cmpxchg_inatomic()
is implemented and always working. This removes a couple of runtime
@@ -1494,6 +1540,16 @@ config AIO
by some high performance threaded applications. Disabling
this option saves about 7k.
+config ADVISE_SYSCALLS
+ bool "Enable madvise/fadvise syscalls" if EXPERT
+ default y
+ help
+ This option enables the madvise and fadvise syscalls, used by
+ applications to advise the kernel about their future memory or file
+ usage, improving performance. If building an embedded system where no
+ applications use these syscalls, you can disable this option to save
+ space.
+
config PCI_QUIRKS
default y
bool "Enable PCI quirk workarounds" if EXPERT
@@ -1863,6 +1919,49 @@ config MODULE_SIG_HASH
default "sha384" if MODULE_SIG_SHA384
default "sha512" if MODULE_SIG_SHA512
+config MODULE_COMPRESS
+ bool "Compress modules on installation"
+ depends on MODULES
+ help
+ This option compresses the kernel modules when 'make
+ modules_install' is run.
+
+ The modules will be compressed either using gzip or xz depend on the
+ choice made in "Compression algorithm".
+
+ module-init-tools has support for gzip format while kmod handle gzip
+ and xz compressed modules.
+
+ When a kernel module is installed from outside of the main kernel
+ source and uses the Kbuild system for installing modules then that
+ kernel module will also be compressed when it is installed.
+
+ This option provides little benefit when the modules are to be used inside
+ an initrd or initramfs, it generally is more efficient to compress the whole
+ initrd or initramfs instead.
+
+ This is fully compatible with signed modules while the signed module is
+ compressed. module-init-tools or kmod handles decompression and provide to
+ other layer the uncompressed but signed payload.
+
+choice
+ prompt "Compression algorithm"
+ depends on MODULE_COMPRESS
+ default MODULE_COMPRESS_GZIP
+ help
+ This determines which sort of compression will be used during
+ 'make modules_install'.
+
+ GZIP (default) and XZ are supported.
+
+config MODULE_COMPRESS_GZIP
+ bool "GZIP"
+
+config MODULE_COMPRESS_XZ
+ bool "XZ"
+
+endchoice
+
endif # MODULES
config INIT_ALL_POSSIBLE
diff --git a/init/calibrate.c b/init/calibrate.c
index 520702db9acc..ce635dccf3d9 100644
--- a/init/calibrate.c
+++ b/init/calibrate.c
@@ -262,6 +262,15 @@ unsigned long __attribute__((weak)) calibrate_delay_is_known(void)
return 0;
}
+/*
+ * Indicate the cpu delay calibration is done. This can be used by
+ * architectures to stop accepting delay timer registrations after this point.
+ */
+
+void __attribute__((weak)) calibration_delay_done(void)
+{
+}
+
void calibrate_delay(void)
{
unsigned long lpj;
@@ -301,4 +310,6 @@ void calibrate_delay(void)
loops_per_jiffy = lpj;
printed = true;
+
+ calibration_delay_done();
}
diff --git a/init/do_mounts_rd.c b/init/do_mounts_rd.c
index a8227022e3a0..e5d059e8aa11 100644
--- a/init/do_mounts_rd.c
+++ b/init/do_mounts_rd.c
@@ -311,9 +311,9 @@ static int exit_code;
static int decompress_error;
static int crd_infd, crd_outfd;
-static int __init compr_fill(void *buf, unsigned int len)
+static long __init compr_fill(void *buf, unsigned long len)
{
- int r = sys_read(crd_infd, buf, len);
+ long r = sys_read(crd_infd, buf, len);
if (r < 0)
printk(KERN_ERR "RAMDISK: error while reading compressed data");
else if (r == 0)
@@ -321,13 +321,13 @@ static int __init compr_fill(void *buf, unsigned int len)
return r;
}
-static int __init compr_flush(void *window, unsigned int outcnt)
+static long __init compr_flush(void *window, unsigned long outcnt)
{
- int written = sys_write(crd_outfd, window, outcnt);
+ long written = sys_write(crd_outfd, window, outcnt);
if (written != outcnt) {
if (decompress_error == 0)
printk(KERN_ERR
- "RAMDISK: incomplete write (%d != %d)\n",
+ "RAMDISK: incomplete write (%ld != %ld)\n",
written, outcnt);
decompress_error = 1;
return -1;
diff --git a/init/initramfs.c b/init/initramfs.c
index a8497fab1c3d..bece48c3461e 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -19,6 +19,29 @@
#include <linux/syscalls.h>
#include <linux/utime.h>
+static ssize_t __init xwrite(int fd, const char *p, size_t count)
+{
+ ssize_t out = 0;
+
+ /* sys_write only can write MAX_RW_COUNT aka 2G-4K bytes at most */
+ while (count) {
+ ssize_t rv = sys_write(fd, p, count);
+
+ if (rv < 0) {
+ if (rv == -EINTR || rv == -EAGAIN)
+ continue;
+ return out ? out : rv;
+ } else if (rv == 0)
+ break;
+
+ p += rv;
+ out += rv;
+ count -= rv;
+ }
+
+ return out;
+}
+
static __initdata char *message;
static void __init error(char *x)
{
@@ -174,7 +197,7 @@ static __initdata enum state {
} state, next_state;
static __initdata char *victim;
-static __initdata unsigned count;
+static unsigned long count __initdata;
static __initdata loff_t this_header, next_header;
static inline void __init eat(unsigned n)
@@ -186,7 +209,7 @@ static inline void __init eat(unsigned n)
static __initdata char *vcollected;
static __initdata char *collected;
-static __initdata int remains;
+static long remains __initdata;
static __initdata char *collect;
static void __init read_into(char *buf, unsigned size, enum state next)
@@ -213,7 +236,7 @@ static int __init do_start(void)
static int __init do_collect(void)
{
- unsigned n = remains;
+ unsigned long n = remains;
if (count < n)
n = count;
memcpy(collect, victim, n);
@@ -346,7 +369,8 @@ static int __init do_name(void)
static int __init do_copy(void)
{
if (count >= body_len) {
- sys_write(wfd, victim, body_len);
+ if (xwrite(wfd, victim, body_len) != body_len)
+ error("write error");
sys_close(wfd);
do_utime(vcollected, mtime);
kfree(vcollected);
@@ -354,7 +378,8 @@ static int __init do_copy(void)
state = SkipIt;
return 0;
} else {
- sys_write(wfd, victim, count);
+ if (xwrite(wfd, victim, count) != count)
+ error("write error");
body_len -= count;
eat(count);
return 1;
@@ -384,7 +409,7 @@ static __initdata int (*actions[])(void) = {
[Reset] = do_reset,
};
-static int __init write_buffer(char *buf, unsigned len)
+static long __init write_buffer(char *buf, unsigned long len)
{
count = len;
victim = buf;
@@ -394,11 +419,11 @@ static int __init write_buffer(char *buf, unsigned len)
return len - count;
}
-static int __init flush_buffer(void *bufv, unsigned len)
+static long __init flush_buffer(void *bufv, unsigned long len)
{
char *buf = (char *) bufv;
- int written;
- int origLen = len;
+ long written;
+ long origLen = len;
if (message)
return -1;
while ((written = write_buffer(buf, len)) < len && !message) {
@@ -417,13 +442,13 @@ static int __init flush_buffer(void *bufv, unsigned len)
return origLen;
}
-static unsigned my_inptr; /* index of next byte to be processed in inbuf */
+static unsigned long my_inptr; /* index of next byte to be processed in inbuf */
#include <linux/decompress/generic.h>
-static char * __init unpack_to_rootfs(char *buf, unsigned len)
+static char * __init unpack_to_rootfs(char *buf, unsigned long len)
{
- int written, res;
+ long written;
decompress_fn decompress;
const char *compress_name;
static __initdata char msg_buf[64];
@@ -457,7 +482,7 @@ static char * __init unpack_to_rootfs(char *buf, unsigned len)
decompress = decompress_method(buf, len, &compress_name);
pr_debug("Detected %s compressed data\n", compress_name);
if (decompress) {
- res = decompress(buf, len, NULL, flush_buffer, NULL,
+ int res = decompress(buf, len, NULL, flush_buffer, NULL,
&my_inptr, error);
if (res)
error("decompressor failed");
@@ -603,8 +628,13 @@ static int __init populate_rootfs(void)
fd = sys_open("/initrd.image",
O_WRONLY|O_CREAT, 0700);
if (fd >= 0) {
- sys_write(fd, (char *)initrd_start,
- initrd_end - initrd_start);
+ ssize_t written = xwrite(fd, (char *)initrd_start,
+ initrd_end - initrd_start);
+
+ if (written != initrd_end - initrd_start)
+ pr_err("/initrd.image: incomplete write (%zd != %ld)\n",
+ written, initrd_end - initrd_start);
+
sys_close(fd);
free_initrd();
}
diff --git a/init/main.c b/init/main.c
index e8ae1fef0908..bb1aed928f21 100644
--- a/init/main.c
+++ b/init/main.c
@@ -6,7 +6,7 @@
* GK 2/5/95 - Changed to support mounting root fs via NFS
* Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
* Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
- * Simplified starting of init: Michael A. Griffith <grif@acm.org>
+ * Simplified starting of init: Michael A. Griffith <grif@acm.org>
*/
#define DEBUG /* Enable initcall_debug */
@@ -136,7 +136,7 @@ static char *ramdisk_execute_command;
* Used to generate warnings if static_key manipulation functions are used
* before jump_label_init is called.
*/
-bool static_key_initialized __read_mostly = false;
+bool static_key_initialized __read_mostly;
EXPORT_SYMBOL_GPL(static_key_initialized);
/*
@@ -159,8 +159,8 @@ static int __init set_reset_devices(char *str)
__setup("reset_devices", set_reset_devices);
-static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
-const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
+static const char *argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
+const char *envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
static const char *panic_later, *panic_param;
extern const struct obs_kernel_param __setup_start[], __setup_end[];
@@ -199,7 +199,6 @@ static int __init obsolete_checksetup(char *line)
* still work even if initially too large, it will just take slightly longer
*/
unsigned long loops_per_jiffy = (1<<12);
-
EXPORT_SYMBOL(loops_per_jiffy);
static int __init debug_kernel(char *str)
@@ -376,8 +375,8 @@ static void __init setup_command_line(char *command_line)
initcall_command_line =
memblock_virt_alloc(strlen(boot_command_line) + 1, 0);
static_command_line = memblock_virt_alloc(strlen(command_line) + 1, 0);
- strcpy (saved_command_line, boot_command_line);
- strcpy (static_command_line, command_line);
+ strcpy(saved_command_line, boot_command_line);
+ strcpy(static_command_line, command_line);
}
/*
@@ -445,8 +444,8 @@ void __init parse_early_options(char *cmdline)
/* Arch code calls this early on, or if not, just before other parsing. */
void __init parse_early_param(void)
{
- static __initdata int done = 0;
- static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
+ static int done __initdata;
+ static char tmp_cmdline[COMMAND_LINE_SIZE] __initdata;
if (done)
return;
@@ -500,7 +499,8 @@ static void __init mm_init(void)
asmlinkage __visible void __init start_kernel(void)
{
- char * command_line, *after_dashes;
+ char *command_line;
+ char *after_dashes;
extern const struct kernel_param __start___param[], __stop___param[];
/*
@@ -572,7 +572,8 @@ asmlinkage __visible void __init start_kernel(void)
* fragile until we cpu_idle() for the first time.
*/
preempt_disable();
- if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n"))
+ if (WARN(!irqs_disabled(),
+ "Interrupts were enabled *very* early, fixing it\n"))
local_irq_disable();
idr_init_cache();
rcu_init();