diff options
Diffstat (limited to 'net/bluetooth/hci_sync.c')
-rw-r--r-- | net/bluetooth/hci_sync.c | 216 |
1 files changed, 182 insertions, 34 deletions
diff --git a/net/bluetooth/hci_sync.c b/net/bluetooth/hci_sync.c index 117eedb6f709..647a8ce54062 100644 --- a/net/bluetooth/hci_sync.c +++ b/net/bluetooth/hci_sync.c @@ -246,8 +246,9 @@ int __hci_cmd_sync_status_sk(struct hci_dev *hdev, u16 opcode, u32 plen, skb = __hci_cmd_sync_sk(hdev, opcode, plen, param, event, timeout, sk); if (IS_ERR(skb)) { - bt_dev_err(hdev, "Opcode 0x%4x failed: %ld", opcode, - PTR_ERR(skb)); + if (!event) + bt_dev_err(hdev, "Opcode 0x%4x failed: %ld", opcode, + PTR_ERR(skb)); return PTR_ERR(skb); } @@ -643,6 +644,7 @@ void hci_cmd_sync_clear(struct hci_dev *hdev) cancel_work_sync(&hdev->cmd_sync_work); cancel_work_sync(&hdev->reenable_adv_work); + mutex_lock(&hdev->cmd_sync_work_lock); list_for_each_entry_safe(entry, tmp, &hdev->cmd_sync_work_list, list) { if (entry->destroy) entry->destroy(hdev, entry->data, -ECANCELED); @@ -650,6 +652,7 @@ void hci_cmd_sync_clear(struct hci_dev *hdev) list_del(&entry->list); kfree(entry); } + mutex_unlock(&hdev->cmd_sync_work_lock); } void __hci_cmd_sync_cancel(struct hci_dev *hdev, int err) @@ -681,8 +684,12 @@ void hci_cmd_sync_cancel(struct hci_dev *hdev, int err) } EXPORT_SYMBOL(hci_cmd_sync_cancel); -int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, - void *data, hci_cmd_sync_work_destroy_t destroy) +/* Submit HCI command to be run in as cmd_sync_work: + * + * - hdev must _not_ be unregistered + */ +int hci_cmd_sync_submit(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, + void *data, hci_cmd_sync_work_destroy_t destroy) { struct hci_cmd_sync_work_entry *entry; @@ -705,6 +712,23 @@ int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, return 0; } +EXPORT_SYMBOL(hci_cmd_sync_submit); + +/* Queue HCI command: + * + * - hdev must be running + */ +int hci_cmd_sync_queue(struct hci_dev *hdev, hci_cmd_sync_work_func_t func, + void *data, hci_cmd_sync_work_destroy_t destroy) +{ + /* Only queue command if hdev is running which means it had been opened + * and is either on init phase or is already up. + */ + if (!test_bit(HCI_RUNNING, &hdev->flags)) + return -ENETDOWN; + + return hci_cmd_sync_submit(hdev, func, data, destroy); +} EXPORT_SYMBOL(hci_cmd_sync_queue); int hci_update_eir_sync(struct hci_dev *hdev) @@ -2367,6 +2391,45 @@ static int hci_resume_advertising_sync(struct hci_dev *hdev) return err; } +static int hci_pause_addr_resolution(struct hci_dev *hdev) +{ + int err; + + if (!use_ll_privacy(hdev)) + return 0; + + if (!hci_dev_test_flag(hdev, HCI_LL_RPA_RESOLUTION)) + return 0; + + /* Cannot disable addr resolution if scanning is enabled or + * when initiating an LE connection. + */ + if (hci_dev_test_flag(hdev, HCI_LE_SCAN) || + hci_lookup_le_connect(hdev)) { + bt_dev_err(hdev, "Command not allowed when scan/LE connect"); + return -EPERM; + } + + /* Cannot disable addr resolution if advertising is enabled. */ + err = hci_pause_advertising_sync(hdev); + if (err) { + bt_dev_err(hdev, "Pause advertising failed: %d", err); + return err; + } + + err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00); + if (err) + bt_dev_err(hdev, "Unable to disable Address Resolution: %d", + err); + + /* Return if address resolution is disabled and RPA is not used. */ + if (!err && scan_use_rpa(hdev)) + return 0; + + hci_resume_advertising_sync(hdev); + return err; +} + struct sk_buff *hci_read_local_oob_data_sync(struct hci_dev *hdev, bool extended, struct sock *sk) { @@ -2402,7 +2465,7 @@ static u8 hci_update_accept_list_sync(struct hci_dev *hdev) u8 filter_policy; int err; - /* Pause advertising if resolving list can be used as controllers are + /* Pause advertising if resolving list can be used as controllers * cannot accept resolving list modifications while advertising. */ if (use_ll_privacy(hdev)) { @@ -3319,6 +3382,7 @@ static const struct hci_init_stage amp_init1[] = { HCI_INIT(hci_read_flow_control_mode_sync), /* HCI_OP_READ_LOCATION_DATA */ HCI_INIT(hci_read_location_data_sync), + {} }; static int hci_init1_sync(struct hci_dev *hdev) @@ -3353,6 +3417,7 @@ static int hci_init1_sync(struct hci_dev *hdev) static const struct hci_init_stage amp_init2[] = { /* HCI_OP_READ_LOCAL_FEATURES */ HCI_INIT(hci_read_local_features_sync), + {} }; /* Read Buffer Size (ACL mtu, max pkt, etc.) */ @@ -4049,7 +4114,8 @@ static int hci_le_set_rpa_timeout_sync(struct hci_dev *hdev) { __le16 timeout = cpu_to_le16(hdev->rpa_timeout); - if (!(hdev->commands[35] & 0x04)) + if (!(hdev->commands[35] & 0x04) || + test_bit(HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT, &hdev->quirks)) return 0; return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_RPA_TIMEOUT, @@ -4370,18 +4436,38 @@ static int hci_le_set_write_def_data_len_sync(struct hci_dev *hdev) sizeof(cp), &cp, HCI_CMD_TIMEOUT); } -/* Set Default PHY parameters if command is supported */ +/* Set Default PHY parameters if command is supported, enables all supported + * PHYs according to the LE Features bits. + */ static int hci_le_set_default_phy_sync(struct hci_dev *hdev) { struct hci_cp_le_set_default_phy cp; - if (!(hdev->commands[35] & 0x20)) + if (!(hdev->commands[35] & 0x20)) { + /* If the command is not supported it means only 1M PHY is + * supported. + */ + hdev->le_tx_def_phys = HCI_LE_SET_PHY_1M; + hdev->le_rx_def_phys = HCI_LE_SET_PHY_1M; return 0; + } memset(&cp, 0, sizeof(cp)); cp.all_phys = 0x00; - cp.tx_phys = hdev->le_tx_def_phys; - cp.rx_phys = hdev->le_rx_def_phys; + cp.tx_phys = HCI_LE_SET_PHY_1M; + cp.rx_phys = HCI_LE_SET_PHY_1M; + + /* Enables 2M PHY if supported */ + if (le_2m_capable(hdev)) { + cp.tx_phys |= HCI_LE_SET_PHY_2M; + cp.rx_phys |= HCI_LE_SET_PHY_2M; + } + + /* Enables Coded PHY if supported */ + if (le_coded_capable(hdev)) { + cp.tx_phys |= HCI_LE_SET_PHY_CODED; + cp.rx_phys |= HCI_LE_SET_PHY_CODED; + } return __hci_cmd_sync_status(hdev, HCI_OP_LE_SET_DEFAULT_PHY, sizeof(cp), &cp, HCI_CMD_TIMEOUT); @@ -4489,6 +4575,9 @@ static const struct { "HCI Set Event Filter command not supported."), HCI_QUIRK_BROKEN(ENHANCED_SETUP_SYNC_CONN, "HCI Enhanced Setup Synchronous Connection command is " + "advertised, but not supported."), + HCI_QUIRK_BROKEN(SET_RPA_TIMEOUT, + "HCI LE Set Random Private Address Timeout command is " "advertised, but not supported.") }; @@ -4683,6 +4772,8 @@ int hci_dev_open_sync(struct hci_dev *hdev) goto done; } + hci_devcd_reset(hdev); + set_bit(HCI_RUNNING, &hdev->flags); hci_sock_dev_event(hdev, HCI_DEV_OPEN); @@ -5064,10 +5155,12 @@ static int hci_disconnect_sync(struct hci_dev *hdev, struct hci_conn *conn, cp.handle = cpu_to_le16(conn->handle); cp.reason = reason; - /* Wait for HCI_EV_DISCONN_COMPLETE not HCI_EV_CMD_STATUS when not - * suspending. + /* Wait for HCI_EV_DISCONN_COMPLETE, not HCI_EV_CMD_STATUS, when the + * reason is anything but HCI_ERROR_REMOTE_POWER_OFF. This reason is + * used when suspending or powering off, where we don't want to wait + * for the peer's response. */ - if (!hdev->suspended) + if (reason != HCI_ERROR_REMOTE_POWER_OFF) return __hci_cmd_sync_status_sk(hdev, HCI_OP_DISCONNECT, sizeof(cp), &cp, HCI_EV_DISCONN_COMPLETE, @@ -5083,8 +5176,11 @@ static int hci_le_connect_cancel_sync(struct hci_dev *hdev, if (test_bit(HCI_CONN_SCANNING, &conn->flags)) return 0; + if (test_and_set_bit(HCI_CONN_CANCEL, &conn->flags)) + return 0; + return __hci_cmd_sync_status(hdev, HCI_OP_LE_CREATE_CONN_CANCEL, - 6, &conn->dst, HCI_CMD_TIMEOUT); + 0, NULL, HCI_CMD_TIMEOUT); } static int hci_connect_cancel_sync(struct hci_dev *hdev, struct hci_conn *conn) @@ -5394,27 +5490,12 @@ static int hci_active_scan_sync(struct hci_dev *hdev, uint16_t interval) cancel_interleave_scan(hdev); - /* Pause advertising since active scanning disables address resolution - * which advertising depend on in order to generate its RPAs. + /* Pause address resolution for active scan and stop advertising if + * privacy is enabled. */ - if (use_ll_privacy(hdev) && hci_dev_test_flag(hdev, HCI_PRIVACY)) { - err = hci_pause_advertising_sync(hdev); - if (err) { - bt_dev_err(hdev, "pause advertising failed: %d", err); - goto failed; - } - } - - /* Disable address resolution while doing active scanning since the - * accept list shall not be used and all reports shall reach the host - * anyway. - */ - err = hci_le_set_addr_resolution_enable_sync(hdev, 0x00); - if (err) { - bt_dev_err(hdev, "Unable to disable Address Resolution: %d", - err); + err = hci_pause_addr_resolution(hdev); + if (err) goto failed; - } /* All active scans will be done with either a resolvable private * address (when privacy feature has been enabled) or non-resolvable @@ -5821,7 +5902,6 @@ static int hci_le_ext_directed_advertising_sync(struct hci_dev *hdev, memset(&cp, 0, sizeof(cp)); cp.evt_properties = cpu_to_le16(LE_LEGACY_ADV_DIRECT_IND); - cp.own_addr_type = own_addr_type; cp.channel_map = hdev->le_adv_channel_map; cp.tx_power = HCI_TX_POWER_INVALID; cp.primary_phy = HCI_ADV_PHY_1M; @@ -6074,11 +6154,79 @@ int hci_le_create_conn_sync(struct hci_dev *hdev, struct hci_conn *conn) conn->conn_timeout, NULL); done: + if (err == -ETIMEDOUT) + hci_le_connect_cancel_sync(hdev, conn); + /* Re-enable advertising after the connection attempt is finished. */ hci_resume_advertising_sync(hdev); return err; } +int hci_le_create_cis_sync(struct hci_dev *hdev, struct hci_conn *conn) +{ + struct { + struct hci_cp_le_create_cis cp; + struct hci_cis cis[0x1f]; + } cmd; + u8 cig; + struct hci_conn *hcon = conn; + + memset(&cmd, 0, sizeof(cmd)); + cmd.cis[0].acl_handle = cpu_to_le16(conn->parent->handle); + cmd.cis[0].cis_handle = cpu_to_le16(conn->handle); + cmd.cp.num_cis++; + cig = conn->iso_qos.ucast.cig; + + hci_dev_lock(hdev); + + rcu_read_lock(); + + list_for_each_entry_rcu(conn, &hdev->conn_hash.list, list) { + struct hci_cis *cis = &cmd.cis[cmd.cp.num_cis]; + + if (conn == hcon || conn->type != ISO_LINK || + conn->state == BT_CONNECTED || + conn->iso_qos.ucast.cig != cig) + continue; + + /* Check if all CIS(s) belonging to a CIG are ready */ + if (!conn->parent || conn->parent->state != BT_CONNECTED || + conn->state != BT_CONNECT) { + cmd.cp.num_cis = 0; + break; + } + + /* Group all CIS with state BT_CONNECT since the spec don't + * allow to send them individually: + * + * BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E + * page 2566: + * + * If the Host issues this command before all the + * HCI_LE_CIS_Established events from the previous use of the + * command have been generated, the Controller shall return the + * error code Command Disallowed (0x0C). + */ + cis->acl_handle = cpu_to_le16(conn->parent->handle); + cis->cis_handle = cpu_to_le16(conn->handle); + cmd.cp.num_cis++; + } + + rcu_read_unlock(); + + hci_dev_unlock(hdev); + + if (!cmd.cp.num_cis) + return 0; + + /* Wait for HCI_LE_CIS_Established */ + return __hci_cmd_sync_status_sk(hdev, HCI_OP_LE_CREATE_CIS, + sizeof(cmd.cp) + sizeof(cmd.cis[0]) * + cmd.cp.num_cis, &cmd, + HCI_EVT_LE_CIS_ESTABLISHED, + conn->conn_timeout, NULL); +} + int hci_le_remove_cig_sync(struct hci_dev *hdev, u8 handle) { struct hci_cp_le_remove_cig cp; |