summaryrefslogtreecommitdiff
path: root/net/mac80211/mlme.c
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211/mlme.c')
-rw-r--r--net/mac80211/mlme.c227
1 files changed, 175 insertions, 52 deletions
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a3a9421555af..45fbb9e33746 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -28,13 +28,19 @@
#include "rate.h"
#include "led.h"
+#define IEEE80211_MAX_NULLFUNC_TRIES 2
#define IEEE80211_MAX_PROBE_TRIES 5
/*
- * beacon loss detection timeout
- * XXX: should depend on beacon interval
+ * Beacon loss timeout is calculated as N frames times the
+ * advertised beacon interval. This may need to be somewhat
+ * higher than what hardware might detect to account for
+ * delays in the host processing frames. But since we also
+ * probe on beacon miss before declaring the connection lost
+ * default to what we want.
*/
-#define IEEE80211_BEACON_LOSS_TIME (2 * HZ)
+#define IEEE80211_BEACON_LOSS_COUNT 7
+
/*
* Time the connection can be idle before we probe
* it to see if we can still talk to the AP.
@@ -121,7 +127,7 @@ void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
return;
mod_timer(&sdata->u.mgd.bcn_mon_timer,
- round_jiffies_up(jiffies + IEEE80211_BEACON_LOSS_TIME));
+ round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
}
void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
@@ -619,11 +625,12 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
/*
* Go to full PSM if the user configures a very low
* latency requirement.
- * The 2 second value is there for compatibility until
- * the PM_QOS_NETWORK_LATENCY is configured with real
- * values.
+ * The 2000 second value is there for compatibility
+ * until the PM_QOS_NETWORK_LATENCY is configured
+ * with real values.
*/
- if (latency > 1900000000 && latency != 2000000000)
+ if (latency > (1900 * USEC_PER_MSEC) &&
+ latency != (2000 * USEC_PER_SEC))
timeout = 0;
else
timeout = 100;
@@ -871,6 +878,9 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
bss_info_changed |= ieee80211_handle_bss_capability(sdata,
cbss->capability, bss->has_erp_value, bss->erp_value);
+ sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
+ IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
+
sdata->u.mgd.associated = cbss;
memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
@@ -1026,6 +1036,54 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
ieee80211_sta_reset_conn_monitor(sdata);
}
+static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
+{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+ if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
+ IEEE80211_STA_CONNECTION_POLL)))
+ return;
+
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+ mutex_lock(&sdata->local->iflist_mtx);
+ ieee80211_recalc_ps(sdata->local, -1);
+ mutex_unlock(&sdata->local->iflist_mtx);
+
+ if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
+ return;
+
+ /*
+ * We've received a probe response, but are not sure whether
+ * we have or will be receiving any beacons or data, so let's
+ * schedule the timers again, just in case.
+ */
+ ieee80211_sta_reset_beacon_monitor(sdata);
+
+ mod_timer(&ifmgd->conn_mon_timer,
+ round_jiffies_up(jiffies +
+ IEEE80211_CONNECTION_IDLE_TIME));
+}
+
+void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_hdr *hdr, bool ack)
+{
+ if (!ieee80211_is_data(hdr->frame_control))
+ return;
+
+ if (ack)
+ ieee80211_sta_reset_conn_monitor(sdata);
+
+ if (ieee80211_is_nullfunc(hdr->frame_control) &&
+ sdata->u.mgd.probe_send_count > 0) {
+ if (ack)
+ sdata->u.mgd.probe_send_count = 0;
+ else
+ sdata->u.mgd.nullfunc_failed = true;
+ ieee80211_queue_work(&sdata->local->hw, &sdata->work);
+ }
+}
+
static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1041,8 +1099,20 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
if (ifmgd->probe_send_count >= unicast_limit)
dst = NULL;
- ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
- ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+ /*
+ * When the hardware reports an accurate Tx ACK status, it's
+ * better to send a nullfunc frame instead of a probe request,
+ * as it will kick us off the AP quickly if we aren't associated
+ * anymore. The timeout will be reset if the frame is ACKed by
+ * the AP.
+ */
+ if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
+ ifmgd->nullfunc_failed = false;
+ ieee80211_send_nullfunc(sdata->local, sdata, 0);
+ } else {
+ ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+ ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0);
+ }
ifmgd->probe_send_count++;
ifmgd->probe_timeout = jiffies + IEEE80211_PROBE_WAIT;
@@ -1108,6 +1178,30 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
mutex_unlock(&ifmgd->mtx);
}
+struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif)
+{
+ struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+ struct sk_buff *skb;
+ const u8 *ssid;
+
+ if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
+ return NULL;
+
+ ASSERT_MGD_MTX(ifmgd);
+
+ if (!ifmgd->associated)
+ return NULL;
+
+ ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
+ skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid,
+ ssid + 2, ssid[1], NULL, 0);
+
+ return skb;
+}
+EXPORT_SYMBOL(ieee80211_ap_probereq_get);
+
static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@@ -1485,29 +1579,8 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
if (ifmgd->associated &&
- memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0 &&
- ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
- IEEE80211_STA_CONNECTION_POLL)) {
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
- mutex_lock(&sdata->local->iflist_mtx);
- ieee80211_recalc_ps(sdata->local, -1);
- mutex_unlock(&sdata->local->iflist_mtx);
-
- if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
- return;
-
- /*
- * We've received a probe response, but are not sure whether
- * we have or will be receiving any beacons or data, so let's
- * schedule the timers again, just in case.
- */
- ieee80211_sta_reset_beacon_monitor(sdata);
-
- mod_timer(&ifmgd->conn_mon_timer,
- round_jiffies_up(jiffies +
- IEEE80211_CONNECTION_IDLE_TIME));
- }
+ memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0)
+ ieee80211_reset_ap_probe(sdata);
}
/*
@@ -1845,6 +1918,31 @@ static void ieee80211_sta_timer(unsigned long data)
ieee80211_queue_work(&local->hw, &sdata->work);
}
+static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
+ u8 *bssid)
+{
+ struct ieee80211_local *local = sdata->local;
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+
+ ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
+ IEEE80211_STA_BEACON_POLL);
+
+ ieee80211_set_disassoc(sdata, true, true);
+ mutex_unlock(&ifmgd->mtx);
+ mutex_lock(&local->mtx);
+ ieee80211_recalc_idle(local);
+ mutex_unlock(&local->mtx);
+ /*
+ * must be outside lock due to cfg80211,
+ * but that's not a problem.
+ */
+ ieee80211_send_deauth_disassoc(sdata, bssid,
+ IEEE80211_STYPE_DEAUTH,
+ WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
+ NULL, true);
+ mutex_lock(&ifmgd->mtx);
+}
+
void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
@@ -1857,12 +1955,49 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
IEEE80211_STA_CONNECTION_POLL) &&
ifmgd->associated) {
u8 bssid[ETH_ALEN];
+ int max_tries;
memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
- if (time_is_after_jiffies(ifmgd->probe_timeout))
- run_again(ifmgd, ifmgd->probe_timeout);
- else if (ifmgd->probe_send_count < IEEE80211_MAX_PROBE_TRIES) {
+ if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
+ max_tries = IEEE80211_MAX_NULLFUNC_TRIES;
+ else
+ max_tries = IEEE80211_MAX_PROBE_TRIES;
+
+ /* ACK received for nullfunc probing frame */
+ if (!ifmgd->probe_send_count)
+ ieee80211_reset_ap_probe(sdata);
+ else if (ifmgd->nullfunc_failed) {
+ if (ifmgd->probe_send_count < max_tries) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ wiphy_debug(local->hw.wiphy,
+ "%s: No ack for nullfunc frame to"
+ " AP %pM, try %d\n",
+ sdata->name, bssid,
+ ifmgd->probe_send_count);
+#endif
+ ieee80211_mgd_probe_ap_send(sdata);
+ } else {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ wiphy_debug(local->hw.wiphy,
+ "%s: No ack for nullfunc frame to"
+ " AP %pM, disconnecting.\n",
+ sdata->name, bssid);
+#endif
+ ieee80211_sta_connection_lost(sdata, bssid);
+ }
+ } else if (time_is_after_jiffies(ifmgd->probe_timeout))
+ run_again(ifmgd, ifmgd->probe_timeout);
+ else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
+#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
+ wiphy_debug(local->hw.wiphy,
+ "%s: Failed to send nullfunc to AP %pM"
+ " after %dms, disconnecting.\n",
+ sdata->name,
+ bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
+#endif
+ ieee80211_sta_connection_lost(sdata, bssid);
+ } else if (ifmgd->probe_send_count < max_tries) {
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
wiphy_debug(local->hw.wiphy,
"%s: No probe response from AP %pM"
@@ -1877,27 +2012,13 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
* We actually lost the connection ... or did we?
* Let's make sure!
*/
- ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
- IEEE80211_STA_BEACON_POLL);
wiphy_debug(local->hw.wiphy,
"%s: No probe response from AP %pM"
" after %dms, disconnecting.\n",
sdata->name,
bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ);
- ieee80211_set_disassoc(sdata, true, true);
- mutex_unlock(&ifmgd->mtx);
- mutex_lock(&local->mtx);
- ieee80211_recalc_idle(local);
- mutex_unlock(&local->mtx);
- /*
- * must be outside lock due to cfg80211,
- * but that's not a problem.
- */
- ieee80211_send_deauth_disassoc(sdata, bssid,
- IEEE80211_STYPE_DEAUTH,
- WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
- NULL, true);
- mutex_lock(&ifmgd->mtx);
+
+ ieee80211_sta_connection_lost(sdata, bssid);
}
}
@@ -1988,6 +2109,8 @@ void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
add_timer(&ifmgd->timer);
if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
add_timer(&ifmgd->chswitch_timer);
+ ieee80211_sta_reset_beacon_monitor(sdata);
+ ieee80211_restart_sta_timer(sdata);
}
#endif