diff options
Diffstat (limited to 'sound/soc/tegra')
-rw-r--r-- | sound/soc/tegra/Kconfig | 9 | ||||
-rw-r--r-- | sound/soc/tegra/Makefile | 2 | ||||
-rw-r--r-- | sound/soc/tegra/tegra_audio_graph_card.c | 251 |
3 files changed, 262 insertions, 0 deletions
diff --git a/sound/soc/tegra/Kconfig b/sound/soc/tegra/Kconfig index a62cc87551ac..6dc83ad8607a 100644 --- a/sound/soc/tegra/Kconfig +++ b/sound/soc/tegra/Kconfig @@ -117,6 +117,15 @@ config SND_SOC_TEGRA210_ADMAIF channel. Buffer size is configurable for each ADMAIIF channel. Say Y or M if you want to add support for Tegra210 ADMAIF module. +config SND_SOC_TEGRA_AUDIO_GRAPH_CARD + tristate "Audio Graph Card based Tegra driver" + depends on SND_AUDIO_GRAPH_CARD + help + Config to enable Tegra audio machine driver based on generic + audio graph driver. It is a thin driver written to customize + few things for Tegra audio. Most of the code is re-used from + audio graph driver and the same DT bindings are used. + config SND_SOC_TEGRA_RT5640 tristate "SoC Audio support for Tegra boards using an RT5640 codec" depends on SND_SOC_TEGRA && I2C && GPIOLIB diff --git a/sound/soc/tegra/Makefile b/sound/soc/tegra/Makefile index 60040a06b814..b17dd6eef92a 100644 --- a/sound/soc/tegra/Makefile +++ b/sound/soc/tegra/Makefile @@ -38,6 +38,7 @@ snd-soc-tegra-trimslice-objs := trimslice.o snd-soc-tegra-alc5632-objs := tegra_alc5632.o snd-soc-tegra-max98090-objs := tegra_max98090.o snd-soc-tegra-sgtl5000-objs := tegra_sgtl5000.o +snd-soc-tegra-audio-graph-card-objs := tegra_audio_graph_card.o obj-$(CONFIG_SND_SOC_TEGRA_RT5640) += snd-soc-tegra-rt5640.o obj-$(CONFIG_SND_SOC_TEGRA_RT5677) += snd-soc-tegra-rt5677.o @@ -48,3 +49,4 @@ obj-$(CONFIG_SND_SOC_TEGRA_TRIMSLICE) += snd-soc-tegra-trimslice.o obj-$(CONFIG_SND_SOC_TEGRA_ALC5632) += snd-soc-tegra-alc5632.o obj-$(CONFIG_SND_SOC_TEGRA_MAX98090) += snd-soc-tegra-max98090.o obj-$(CONFIG_SND_SOC_TEGRA_SGTL5000) += snd-soc-tegra-sgtl5000.o +obj-$(CONFIG_SND_SOC_TEGRA_AUDIO_GRAPH_CARD) += snd-soc-tegra-audio-graph-card.o diff --git a/sound/soc/tegra/tegra_audio_graph_card.c b/sound/soc/tegra/tegra_audio_graph_card.c new file mode 100644 index 000000000000..9e43f16f9336 --- /dev/null +++ b/sound/soc/tegra/tegra_audio_graph_card.c @@ -0,0 +1,251 @@ +// SPDX-License-Identifier: GPL-2.0-only +// +// tegra_audio_graph_card.c - Audio Graph based Tegra Machine Driver +// +// Copyright (c) 2020 NVIDIA CORPORATION. All rights reserved. + +#include <linux/math64.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <sound/graph_card.h> +#include <sound/pcm_params.h> + +#define MAX_PLLA_OUT0_DIV 128 + +#define simple_to_tegra_priv(simple) \ + container_of(simple, struct tegra_audio_priv, simple) + +enum srate_type { + /* + * Sample rates multiple of 8000 Hz and below are supported: + * ( 8000, 16000, 32000, 48000, 96000, 192000 Hz ) + */ + x8_RATE, + + /* + * Sample rates multiple of 11025 Hz and below are supported: + * ( 11025, 22050, 44100, 88200, 176400 Hz ) + */ + x11_RATE, + + NUM_RATE_TYPE, +}; + +struct tegra_audio_priv { + struct asoc_simple_priv simple; + struct clk *clk_plla_out0; + struct clk *clk_plla; +}; + +/* Tegra audio chip data */ +struct tegra_audio_cdata { + unsigned int plla_rates[NUM_RATE_TYPE]; + unsigned int plla_out0_rates[NUM_RATE_TYPE]; +}; + +/* Setup PLL clock as per the given sample rate */ +static int tegra_audio_graph_update_pll(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(rtd->card); + struct tegra_audio_priv *priv = simple_to_tegra_priv(simple); + struct device *dev = rtd->card->dev; + const struct tegra_audio_cdata *data = of_device_get_match_data(dev); + unsigned int plla_rate, plla_out0_rate, bclk; + unsigned int srate = params_rate(params); + int err; + + switch (srate) { + case 11025: + case 22050: + case 44100: + case 88200: + case 176400: + plla_out0_rate = data->plla_out0_rates[x11_RATE]; + plla_rate = data->plla_rates[x11_RATE]; + break; + case 8000: + case 16000: + case 32000: + case 48000: + case 96000: + case 192000: + plla_out0_rate = data->plla_out0_rates[x8_RATE]; + plla_rate = data->plla_rates[x8_RATE]; + break; + default: + dev_err(rtd->card->dev, "Unsupported sample rate %u\n", + srate); + return -EINVAL; + } + + /* + * Below is the clock relation: + * + * PLLA + * | + * |--> PLLA_OUT0 + * | + * |---> I2S modules + * | + * |---> DMIC modules + * | + * |---> DSPK modules + * + * + * Default PLLA_OUT0 rate might be too high when I/O is running + * at minimum PCM configurations. This may result in incorrect + * clock rates and glitchy audio. The maximum divider is 128 + * and any thing higher than that won't work. Thus reduce PLLA_OUT0 + * to work for lower configurations. + * + * This problem is seen for I2S only, as DMIC and DSPK minimum + * clock requirements are under allowed divider limits. + */ + bclk = srate * params_channels(params) * params_width(params); + if (div_u64(plla_out0_rate, bclk) > MAX_PLLA_OUT0_DIV) + plla_out0_rate >>= 1; + + dev_dbg(rtd->card->dev, + "Update clock rates: PLLA(= %u Hz) and PLLA_OUT0(= %u Hz)\n", + plla_rate, plla_out0_rate); + + /* Set PLLA rate */ + err = clk_set_rate(priv->clk_plla, plla_rate); + if (err) { + dev_err(rtd->card->dev, + "Can't set plla rate for %u, err: %d\n", + plla_rate, err); + return err; + } + + /* Set PLLA_OUT0 rate */ + err = clk_set_rate(priv->clk_plla_out0, plla_out0_rate); + if (err) { + dev_err(rtd->card->dev, + "Can't set plla_out0 rate %u, err: %d\n", + plla_out0_rate, err); + return err; + } + + return err; +} + +static int tegra_audio_graph_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream); + struct snd_soc_dai *cpu_dai = asoc_rtd_to_cpu(rtd, 0); + int err; + + /* + * This gets called for each DAI link (FE or BE) when DPCM is used. + * We may not want to update PLLA rate for each call. So PLLA update + * must be restricted to external I/O links (I2S, DMIC or DSPK) since + * they actually depend on it. I/O modules update their clocks in + * hw_param() of their respective component driver and PLLA rate + * update here helps them to derive appropriate rates. + * + * TODO: When more HW accelerators get added (like sample rate + * converter, volume gain controller etc., which don't really + * depend on PLLA) we need a better way to filter here. + */ + if (cpu_dai->driver->ops && rtd->dai_link->no_pcm) { + err = tegra_audio_graph_update_pll(substream, params); + if (err) + return err; + } + + return asoc_simple_hw_params(substream, params); +} + +static const struct snd_soc_ops tegra_audio_graph_ops = { + .startup = asoc_simple_startup, + .shutdown = asoc_simple_shutdown, + .hw_params = tegra_audio_graph_hw_params, +}; + +static int tegra_audio_graph_card_probe(struct snd_soc_card *card) +{ + struct asoc_simple_priv *simple = snd_soc_card_get_drvdata(card); + struct tegra_audio_priv *priv = simple_to_tegra_priv(simple); + + priv->clk_plla = devm_clk_get(card->dev, "pll_a"); + if (IS_ERR(priv->clk_plla)) { + dev_err(card->dev, "Can't retrieve clk pll_a\n"); + return PTR_ERR(priv->clk_plla); + } + + priv->clk_plla_out0 = devm_clk_get(card->dev, "plla_out0"); + if (IS_ERR(priv->clk_plla_out0)) { + dev_err(card->dev, "Can't retrieve clk plla_out0\n"); + return PTR_ERR(priv->clk_plla_out0); + } + + return graph_card_probe(card); +} + +static int tegra_audio_graph_probe(struct platform_device *pdev) +{ + struct tegra_audio_priv *priv; + struct device *dev = &pdev->dev; + struct snd_soc_card *card; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + card = simple_priv_to_card(&priv->simple); + + card->probe = tegra_audio_graph_card_probe; + + /* graph_parse_of() depends on below */ + card->component_chaining = 1; + priv->simple.ops = &tegra_audio_graph_ops; + priv->simple.force_dpcm = 1; + + return graph_parse_of(&priv->simple, dev); +} + +static const struct tegra_audio_cdata tegra210_data = { + /* PLLA */ + .plla_rates[x8_RATE] = 368640000, + .plla_rates[x11_RATE] = 338688000, + /* PLLA_OUT0 */ + .plla_out0_rates[x8_RATE] = 49152000, + .plla_out0_rates[x11_RATE] = 45158400, +}; + +static const struct tegra_audio_cdata tegra186_data = { + /* PLLA */ + .plla_rates[x8_RATE] = 245760000, + .plla_rates[x11_RATE] = 270950400, + /* PLLA_OUT0 */ + .plla_out0_rates[x8_RATE] = 49152000, + .plla_out0_rates[x11_RATE] = 45158400, +}; + +static const struct of_device_id graph_of_tegra_match[] = { + { .compatible = "nvidia,tegra210-audio-graph-card", + .data = &tegra210_data }, + { .compatible = "nvidia,tegra186-audio-graph-card", + .data = &tegra186_data }, + {}, +}; +MODULE_DEVICE_TABLE(of, graph_of_tegra_match); + +static struct platform_driver tegra_audio_graph_card = { + .driver = { + .name = "tegra-audio-graph-card", + .pm = &snd_soc_pm_ops, + .of_match_table = graph_of_tegra_match, + }, + .probe = tegra_audio_graph_probe, +}; +module_platform_driver(tegra_audio_graph_card); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ASoC Tegra Audio Graph Sound Card"); +MODULE_AUTHOR("Sameer Pujar <spujar@nvidia.com>"); |