diff options
Diffstat (limited to 'tools/include/uapi/linux/bpf.h')
-rw-r--r-- | tools/include/uapi/linux/bpf.h | 143 |
1 files changed, 138 insertions, 5 deletions
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index d94d333a8225..9b8c6e310e9a 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -97,6 +97,7 @@ enum bpf_cmd { BPF_RAW_TRACEPOINT_OPEN, BPF_BTF_LOAD, BPF_BTF_GET_FD_BY_ID, + BPF_TASK_FD_QUERY, }; enum bpf_map_type { @@ -141,6 +142,7 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_MSG, BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_CGROUP_SOCK_ADDR, + BPF_PROG_TYPE_LWT_SEG6LOCAL, }; enum bpf_attach_type { @@ -284,8 +286,8 @@ union bpf_attr { char map_name[BPF_OBJ_NAME_LEN]; __u32 map_ifindex; /* ifindex of netdev to create on */ __u32 btf_fd; /* fd pointing to a BTF type data */ - __u32 btf_key_id; /* BTF type_id of the key */ - __u32 btf_value_id; /* BTF type_id of the value */ + __u32 btf_key_type_id; /* BTF type_id of the key */ + __u32 btf_value_type_id; /* BTF type_id of the value */ }; struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ @@ -379,6 +381,22 @@ union bpf_attr { __u32 btf_log_size; __u32 btf_log_level; }; + + struct { + __u32 pid; /* input: pid */ + __u32 fd; /* input: fd */ + __u32 flags; /* input: flags */ + __u32 buf_len; /* input/output: buf len */ + __aligned_u64 buf; /* input/output: + * tp_name for tracepoint + * symbol for kprobe + * filename for uprobe + */ + __u32 prog_id; /* output: prod_id */ + __u32 fd_type; /* output: BPF_FD_TYPE_* */ + __u64 probe_offset; /* output: probe_offset */ + __u64 probe_addr; /* output: probe_addr */ + } task_fd_query; } __attribute__((aligned(8))); /* The description below is an attempt at providing documentation to eBPF @@ -1902,6 +1920,90 @@ union bpf_attr { * egress otherwise). This is the only flag supported for now. * Return * **SK_PASS** on success, or **SK_DROP** on error. + * + * int bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) + * Description + * Encapsulate the packet associated to *skb* within a Layer 3 + * protocol header. This header is provided in the buffer at + * address *hdr*, with *len* its size in bytes. *type* indicates + * the protocol of the header and can be one of: + * + * **BPF_LWT_ENCAP_SEG6** + * IPv6 encapsulation with Segment Routing Header + * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, + * the IPv6 header is computed by the kernel. + * **BPF_LWT_ENCAP_SEG6_INLINE** + * Only works if *skb* contains an IPv6 packet. Insert a + * Segment Routing Header (**struct ipv6_sr_hdr**) inside + * the IPv6 header. + * + * A call to this helper is susceptible to change the underlaying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. Only the flags, tag and TLVs + * inside the outermost IPv6 Segment Routing Header can be + * modified through this helper. + * + * A call to this helper is susceptible to change the underlaying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) + * Description + * Adjust the size allocated to TLVs in the outermost IPv6 + * Segment Routing Header contained in the packet associated to + * *skb*, at position *offset* by *delta* bytes. Only offsets + * after the segments are accepted. *delta* can be as well + * positive (growing) as negative (shrinking). + * + * A call to this helper is susceptible to change the underlaying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * int bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) + * Description + * Apply an IPv6 Segment Routing action of type *action* to the + * packet associated to *skb*. Each action takes a parameter + * contained at address *param*, and of length *param_len* bytes. + * *action* can be one of: + * + * **SEG6_LOCAL_ACTION_END_X** + * End.X action: Endpoint with Layer-3 cross-connect. + * Type of *param*: **struct in6_addr**. + * **SEG6_LOCAL_ACTION_END_T** + * End.T action: Endpoint with specific IPv6 table lookup. + * Type of *param*: **int**. + * **SEG6_LOCAL_ACTION_END_B6** + * End.B6 action: Endpoint bound to an SRv6 policy. + * Type of param: **struct ipv6_sr_hdr**. + * **SEG6_LOCAL_ACTION_END_B6_ENCAP** + * End.B6.Encap action: Endpoint bound to an SRv6 + * encapsulation policy. + * Type of param: **struct ipv6_sr_hdr**. + * + * A call to this helper is susceptible to change the underlaying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -1976,7 +2078,11 @@ union bpf_attr { FN(fib_lookup), \ FN(sock_hash_update), \ FN(msg_redirect_hash), \ - FN(sk_redirect_hash), + FN(sk_redirect_hash), \ + FN(lwt_push_encap), \ + FN(lwt_seg6_store_bytes), \ + FN(lwt_seg6_adjust_srh), \ + FN(lwt_seg6_action), /* integer value in 'imm' field of BPF_CALL instruction selects which helper * function eBPF program intends to call @@ -2043,6 +2149,12 @@ enum bpf_hdr_start_off { BPF_HDR_START_NET, }; +/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ +enum bpf_lwt_encap_mode { + BPF_LWT_ENCAP_SEG6, + BPF_LWT_ENCAP_SEG6_INLINE +}; + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ @@ -2176,6 +2288,14 @@ enum sk_action { struct sk_msg_md { void *data; void *data_end; + + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ }; #define BPF_TAG_SIZE 8 @@ -2197,6 +2317,10 @@ struct bpf_prog_info { __u32 gpl_compatible:1; __u64 netns_dev; __u64 netns_ino; + __u32 nr_jited_ksyms; + __u32 nr_jited_func_lens; + __aligned_u64 jited_ksyms; + __aligned_u64 jited_func_lens; } __attribute__((aligned(8))); struct bpf_map_info { @@ -2211,8 +2335,8 @@ struct bpf_map_info { __u64 netns_dev; __u64 netns_ino; __u32 btf_id; - __u32 btf_key_id; - __u32 btf_value_id; + __u32 btf_key_type_id; + __u32 btf_value_type_id; } __attribute__((aligned(8))); struct bpf_btf_info { @@ -2450,4 +2574,13 @@ struct bpf_fib_lookup { __u8 dmac[6]; /* ETH_ALEN */ }; +enum bpf_task_fd_type { + BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_UPROBE, /* filename + offset */ + BPF_FD_TYPE_URETPROBE, /* filename + offset */ +}; + #endif /* _UAPI__LINUX_BPF_H__ */ |