diff options
Diffstat (limited to 'tools/include/uapi')
-rw-r--r-- | tools/include/uapi/linux/io_uring.h | 757 |
1 files changed, 757 insertions, 0 deletions
diff --git a/tools/include/uapi/linux/io_uring.h b/tools/include/uapi/linux/io_uring.h new file mode 100644 index 000000000000..f1c16f817742 --- /dev/null +++ b/tools/include/uapi/linux/io_uring.h @@ -0,0 +1,757 @@ +/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */ +/* + * Header file for the io_uring interface. + * + * Copyright (C) 2019 Jens Axboe + * Copyright (C) 2019 Christoph Hellwig + */ +#ifndef LINUX_IO_URING_H +#define LINUX_IO_URING_H + +#include <linux/fs.h> +#include <linux/types.h> +/* + * this file is shared with liburing and that has to autodetect + * if linux/time_types.h is available or not, it can + * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H + * if linux/time_types.h is not available + */ +#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H +#include <linux/time_types.h> +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/* + * IO submission data structure (Submission Queue Entry) + */ +struct io_uring_sqe { + __u8 opcode; /* type of operation for this sqe */ + __u8 flags; /* IOSQE_ flags */ + __u16 ioprio; /* ioprio for the request */ + __s32 fd; /* file descriptor to do IO on */ + union { + __u64 off; /* offset into file */ + __u64 addr2; + struct { + __u32 cmd_op; + __u32 __pad1; + }; + }; + union { + __u64 addr; /* pointer to buffer or iovecs */ + __u64 splice_off_in; + struct { + __u32 level; + __u32 optname; + }; + }; + __u32 len; /* buffer size or number of iovecs */ + union { + __kernel_rwf_t rw_flags; + __u32 fsync_flags; + __u16 poll_events; /* compatibility */ + __u32 poll32_events; /* word-reversed for BE */ + __u32 sync_range_flags; + __u32 msg_flags; + __u32 timeout_flags; + __u32 accept_flags; + __u32 cancel_flags; + __u32 open_flags; + __u32 statx_flags; + __u32 fadvise_advice; + __u32 splice_flags; + __u32 rename_flags; + __u32 unlink_flags; + __u32 hardlink_flags; + __u32 xattr_flags; + __u32 msg_ring_flags; + __u32 uring_cmd_flags; + __u32 waitid_flags; + __u32 futex_flags; + }; + __u64 user_data; /* data to be passed back at completion time */ + /* pack this to avoid bogus arm OABI complaints */ + union { + /* index into fixed buffers, if used */ + __u16 buf_index; + /* for grouped buffer selection */ + __u16 buf_group; + } __attribute__((packed)); + /* personality to use, if used */ + __u16 personality; + union { + __s32 splice_fd_in; + __u32 file_index; + __u32 optlen; + struct { + __u16 addr_len; + __u16 __pad3[1]; + }; + }; + union { + struct { + __u64 addr3; + __u64 __pad2[1]; + }; + __u64 optval; + /* + * If the ring is initialized with IORING_SETUP_SQE128, then + * this field is used for 80 bytes of arbitrary command data + */ + __u8 cmd[0]; + }; +}; + +/* + * If sqe->file_index is set to this for opcodes that instantiate a new + * direct descriptor (like openat/openat2/accept), then io_uring will allocate + * an available direct descriptor instead of having the application pass one + * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE + * if the space is full. + */ +#define IORING_FILE_INDEX_ALLOC (~0U) + +enum { + IOSQE_FIXED_FILE_BIT, + IOSQE_IO_DRAIN_BIT, + IOSQE_IO_LINK_BIT, + IOSQE_IO_HARDLINK_BIT, + IOSQE_ASYNC_BIT, + IOSQE_BUFFER_SELECT_BIT, + IOSQE_CQE_SKIP_SUCCESS_BIT, +}; + +/* + * sqe->flags + */ +/* use fixed fileset */ +#define IOSQE_FIXED_FILE (1U << IOSQE_FIXED_FILE_BIT) +/* issue after inflight IO */ +#define IOSQE_IO_DRAIN (1U << IOSQE_IO_DRAIN_BIT) +/* links next sqe */ +#define IOSQE_IO_LINK (1U << IOSQE_IO_LINK_BIT) +/* like LINK, but stronger */ +#define IOSQE_IO_HARDLINK (1U << IOSQE_IO_HARDLINK_BIT) +/* always go async */ +#define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT) +/* select buffer from sqe->buf_group */ +#define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT) +/* don't post CQE if request succeeded */ +#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT) + +/* + * io_uring_setup() flags + */ +#define IORING_SETUP_IOPOLL (1U << 0) /* io_context is polled */ +#define IORING_SETUP_SQPOLL (1U << 1) /* SQ poll thread */ +#define IORING_SETUP_SQ_AFF (1U << 2) /* sq_thread_cpu is valid */ +#define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */ +#define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */ +#define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */ +#define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */ +#define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */ +/* + * Cooperative task running. When requests complete, they often require + * forcing the submitter to transition to the kernel to complete. If this + * flag is set, work will be done when the task transitions anyway, rather + * than force an inter-processor interrupt reschedule. This avoids interrupting + * a task running in userspace, and saves an IPI. + */ +#define IORING_SETUP_COOP_TASKRUN (1U << 8) +/* + * If COOP_TASKRUN is set, get notified if task work is available for + * running and a kernel transition would be needed to run it. This sets + * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN. + */ +#define IORING_SETUP_TASKRUN_FLAG (1U << 9) +#define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */ +#define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */ +/* + * Only one task is allowed to submit requests + */ +#define IORING_SETUP_SINGLE_ISSUER (1U << 12) + +/* + * Defer running task work to get events. + * Rather than running bits of task work whenever the task transitions + * try to do it just before it is needed. + */ +#define IORING_SETUP_DEFER_TASKRUN (1U << 13) + +/* + * Application provides the memory for the rings + */ +#define IORING_SETUP_NO_MMAP (1U << 14) + +/* + * Register the ring fd in itself for use with + * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather + * than an fd. + */ +#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15) + +/* + * Removes indirection through the SQ index array. + */ +#define IORING_SETUP_NO_SQARRAY (1U << 16) + +enum io_uring_op { + IORING_OP_NOP, + IORING_OP_READV, + IORING_OP_WRITEV, + IORING_OP_FSYNC, + IORING_OP_READ_FIXED, + IORING_OP_WRITE_FIXED, + IORING_OP_POLL_ADD, + IORING_OP_POLL_REMOVE, + IORING_OP_SYNC_FILE_RANGE, + IORING_OP_SENDMSG, + IORING_OP_RECVMSG, + IORING_OP_TIMEOUT, + IORING_OP_TIMEOUT_REMOVE, + IORING_OP_ACCEPT, + IORING_OP_ASYNC_CANCEL, + IORING_OP_LINK_TIMEOUT, + IORING_OP_CONNECT, + IORING_OP_FALLOCATE, + IORING_OP_OPENAT, + IORING_OP_CLOSE, + IORING_OP_FILES_UPDATE, + IORING_OP_STATX, + IORING_OP_READ, + IORING_OP_WRITE, + IORING_OP_FADVISE, + IORING_OP_MADVISE, + IORING_OP_SEND, + IORING_OP_RECV, + IORING_OP_OPENAT2, + IORING_OP_EPOLL_CTL, + IORING_OP_SPLICE, + IORING_OP_PROVIDE_BUFFERS, + IORING_OP_REMOVE_BUFFERS, + IORING_OP_TEE, + IORING_OP_SHUTDOWN, + IORING_OP_RENAMEAT, + IORING_OP_UNLINKAT, + IORING_OP_MKDIRAT, + IORING_OP_SYMLINKAT, + IORING_OP_LINKAT, + IORING_OP_MSG_RING, + IORING_OP_FSETXATTR, + IORING_OP_SETXATTR, + IORING_OP_FGETXATTR, + IORING_OP_GETXATTR, + IORING_OP_SOCKET, + IORING_OP_URING_CMD, + IORING_OP_SEND_ZC, + IORING_OP_SENDMSG_ZC, + IORING_OP_READ_MULTISHOT, + IORING_OP_WAITID, + IORING_OP_FUTEX_WAIT, + IORING_OP_FUTEX_WAKE, + IORING_OP_FUTEX_WAITV, + + /* this goes last, obviously */ + IORING_OP_LAST, +}; + +/* + * sqe->uring_cmd_flags top 8bits aren't available for userspace + * IORING_URING_CMD_FIXED use registered buffer; pass this flag + * along with setting sqe->buf_index. + */ +#define IORING_URING_CMD_FIXED (1U << 0) +#define IORING_URING_CMD_MASK IORING_URING_CMD_FIXED + + +/* + * sqe->fsync_flags + */ +#define IORING_FSYNC_DATASYNC (1U << 0) + +/* + * sqe->timeout_flags + */ +#define IORING_TIMEOUT_ABS (1U << 0) +#define IORING_TIMEOUT_UPDATE (1U << 1) +#define IORING_TIMEOUT_BOOTTIME (1U << 2) +#define IORING_TIMEOUT_REALTIME (1U << 3) +#define IORING_LINK_TIMEOUT_UPDATE (1U << 4) +#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5) +#define IORING_TIMEOUT_MULTISHOT (1U << 6) +#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME) +#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE) +/* + * sqe->splice_flags + * extends splice(2) flags + */ +#define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */ + +/* + * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the + * command flags for POLL_ADD are stored in sqe->len. + * + * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if + * the poll handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_POLL_UPDATE Update existing poll request, matching + * sqe->addr as the old user_data field. + * + * IORING_POLL_LEVEL Level triggered poll. + */ +#define IORING_POLL_ADD_MULTI (1U << 0) +#define IORING_POLL_UPDATE_EVENTS (1U << 1) +#define IORING_POLL_UPDATE_USER_DATA (1U << 2) +#define IORING_POLL_ADD_LEVEL (1U << 3) + +/* + * ASYNC_CANCEL flags. + * + * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key + * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the + * request 'user_data' + * IORING_ASYNC_CANCEL_ANY Match any request + * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor + * IORING_ASYNC_CANCEL_USERDATA Match on user_data, default for no other key + * IORING_ASYNC_CANCEL_OP Match request based on opcode + */ +#define IORING_ASYNC_CANCEL_ALL (1U << 0) +#define IORING_ASYNC_CANCEL_FD (1U << 1) +#define IORING_ASYNC_CANCEL_ANY (1U << 2) +#define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3) +#define IORING_ASYNC_CANCEL_USERDATA (1U << 4) +#define IORING_ASYNC_CANCEL_OP (1U << 5) + +/* + * send/sendmsg and recv/recvmsg flags (sqe->ioprio) + * + * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send + * or receive and arm poll if that yields an + * -EAGAIN result, arm poll upfront and skip + * the initial transfer attempt. + * + * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if + * the handler will continue to report + * CQEs on behalf of the same SQE. + * + * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in + * the buf_index field. + * + * IORING_SEND_ZC_REPORT_USAGE + * If set, SEND[MSG]_ZC should report + * the zerocopy usage in cqe.res + * for the IORING_CQE_F_NOTIF cqe. + * 0 is reported if zerocopy was actually possible. + * IORING_NOTIF_USAGE_ZC_COPIED if data was copied + * (at least partially). + */ +#define IORING_RECVSEND_POLL_FIRST (1U << 0) +#define IORING_RECV_MULTISHOT (1U << 1) +#define IORING_RECVSEND_FIXED_BUF (1U << 2) +#define IORING_SEND_ZC_REPORT_USAGE (1U << 3) + +/* + * cqe.res for IORING_CQE_F_NOTIF if + * IORING_SEND_ZC_REPORT_USAGE was requested + * + * It should be treated as a flag, all other + * bits of cqe.res should be treated as reserved! + */ +#define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31) + +/* + * accept flags stored in sqe->ioprio + */ +#define IORING_ACCEPT_MULTISHOT (1U << 0) + +/* + * IORING_OP_MSG_RING command types, stored in sqe->addr + */ +enum { + IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */ + IORING_MSG_SEND_FD, /* send a registered fd to another ring */ +}; + +/* + * IORING_OP_MSG_RING flags (sqe->msg_ring_flags) + * + * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not + * applicable for IORING_MSG_DATA, obviously. + */ +#define IORING_MSG_RING_CQE_SKIP (1U << 0) +/* Pass through the flags from sqe->file_index to cqe->flags */ +#define IORING_MSG_RING_FLAGS_PASS (1U << 1) + +/* + * IO completion data structure (Completion Queue Entry) + */ +struct io_uring_cqe { + __u64 user_data; /* sqe->data submission passed back */ + __s32 res; /* result code for this event */ + __u32 flags; + + /* + * If the ring is initialized with IORING_SETUP_CQE32, then this field + * contains 16-bytes of padding, doubling the size of the CQE. + */ + __u64 big_cqe[]; +}; + +/* + * cqe->flags + * + * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID + * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries + * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv + * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct + * them from sends. + */ +#define IORING_CQE_F_BUFFER (1U << 0) +#define IORING_CQE_F_MORE (1U << 1) +#define IORING_CQE_F_SOCK_NONEMPTY (1U << 2) +#define IORING_CQE_F_NOTIF (1U << 3) + +enum { + IORING_CQE_BUFFER_SHIFT = 16, +}; + +/* + * Magic offsets for the application to mmap the data it needs + */ +#define IORING_OFF_SQ_RING 0ULL +#define IORING_OFF_CQ_RING 0x8000000ULL +#define IORING_OFF_SQES 0x10000000ULL +#define IORING_OFF_PBUF_RING 0x80000000ULL +#define IORING_OFF_PBUF_SHIFT 16 +#define IORING_OFF_MMAP_MASK 0xf8000000ULL + +/* + * Filled with the offset for mmap(2) + */ +struct io_sqring_offsets { + __u32 head; + __u32 tail; + __u32 ring_mask; + __u32 ring_entries; + __u32 flags; + __u32 dropped; + __u32 array; + __u32 resv1; + __u64 user_addr; +}; + +/* + * sq_ring->flags + */ +#define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */ +#define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */ +#define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */ + +struct io_cqring_offsets { + __u32 head; + __u32 tail; + __u32 ring_mask; + __u32 ring_entries; + __u32 overflow; + __u32 cqes; + __u32 flags; + __u32 resv1; + __u64 user_addr; +}; + +/* + * cq_ring->flags + */ + +/* disable eventfd notifications */ +#define IORING_CQ_EVENTFD_DISABLED (1U << 0) + +/* + * io_uring_enter(2) flags + */ +#define IORING_ENTER_GETEVENTS (1U << 0) +#define IORING_ENTER_SQ_WAKEUP (1U << 1) +#define IORING_ENTER_SQ_WAIT (1U << 2) +#define IORING_ENTER_EXT_ARG (1U << 3) +#define IORING_ENTER_REGISTERED_RING (1U << 4) + +/* + * Passed in for io_uring_setup(2). Copied back with updated info on success + */ +struct io_uring_params { + __u32 sq_entries; + __u32 cq_entries; + __u32 flags; + __u32 sq_thread_cpu; + __u32 sq_thread_idle; + __u32 features; + __u32 wq_fd; + __u32 resv[3]; + struct io_sqring_offsets sq_off; + struct io_cqring_offsets cq_off; +}; + +/* + * io_uring_params->features flags + */ +#define IORING_FEAT_SINGLE_MMAP (1U << 0) +#define IORING_FEAT_NODROP (1U << 1) +#define IORING_FEAT_SUBMIT_STABLE (1U << 2) +#define IORING_FEAT_RW_CUR_POS (1U << 3) +#define IORING_FEAT_CUR_PERSONALITY (1U << 4) +#define IORING_FEAT_FAST_POLL (1U << 5) +#define IORING_FEAT_POLL_32BITS (1U << 6) +#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7) +#define IORING_FEAT_EXT_ARG (1U << 8) +#define IORING_FEAT_NATIVE_WORKERS (1U << 9) +#define IORING_FEAT_RSRC_TAGS (1U << 10) +#define IORING_FEAT_CQE_SKIP (1U << 11) +#define IORING_FEAT_LINKED_FILE (1U << 12) +#define IORING_FEAT_REG_REG_RING (1U << 13) + +/* + * io_uring_register(2) opcodes and arguments + */ +enum { + IORING_REGISTER_BUFFERS = 0, + IORING_UNREGISTER_BUFFERS = 1, + IORING_REGISTER_FILES = 2, + IORING_UNREGISTER_FILES = 3, + IORING_REGISTER_EVENTFD = 4, + IORING_UNREGISTER_EVENTFD = 5, + IORING_REGISTER_FILES_UPDATE = 6, + IORING_REGISTER_EVENTFD_ASYNC = 7, + IORING_REGISTER_PROBE = 8, + IORING_REGISTER_PERSONALITY = 9, + IORING_UNREGISTER_PERSONALITY = 10, + IORING_REGISTER_RESTRICTIONS = 11, + IORING_REGISTER_ENABLE_RINGS = 12, + + /* extended with tagging */ + IORING_REGISTER_FILES2 = 13, + IORING_REGISTER_FILES_UPDATE2 = 14, + IORING_REGISTER_BUFFERS2 = 15, + IORING_REGISTER_BUFFERS_UPDATE = 16, + + /* set/clear io-wq thread affinities */ + IORING_REGISTER_IOWQ_AFF = 17, + IORING_UNREGISTER_IOWQ_AFF = 18, + + /* set/get max number of io-wq workers */ + IORING_REGISTER_IOWQ_MAX_WORKERS = 19, + + /* register/unregister io_uring fd with the ring */ + IORING_REGISTER_RING_FDS = 20, + IORING_UNREGISTER_RING_FDS = 21, + + /* register ring based provide buffer group */ + IORING_REGISTER_PBUF_RING = 22, + IORING_UNREGISTER_PBUF_RING = 23, + + /* sync cancelation API */ + IORING_REGISTER_SYNC_CANCEL = 24, + + /* register a range of fixed file slots for automatic slot allocation */ + IORING_REGISTER_FILE_ALLOC_RANGE = 25, + + /* this goes last */ + IORING_REGISTER_LAST, + + /* flag added to the opcode to use a registered ring fd */ + IORING_REGISTER_USE_REGISTERED_RING = 1U << 31 +}; + +/* io-wq worker categories */ +enum { + IO_WQ_BOUND, + IO_WQ_UNBOUND, +}; + +/* deprecated, see struct io_uring_rsrc_update */ +struct io_uring_files_update { + __u32 offset; + __u32 resv; + __aligned_u64 /* __s32 * */ fds; +}; + +/* + * Register a fully sparse file space, rather than pass in an array of all + * -1 file descriptors. + */ +#define IORING_RSRC_REGISTER_SPARSE (1U << 0) + +struct io_uring_rsrc_register { + __u32 nr; + __u32 flags; + __u64 resv2; + __aligned_u64 data; + __aligned_u64 tags; +}; + +struct io_uring_rsrc_update { + __u32 offset; + __u32 resv; + __aligned_u64 data; +}; + +struct io_uring_rsrc_update2 { + __u32 offset; + __u32 resv; + __aligned_u64 data; + __aligned_u64 tags; + __u32 nr; + __u32 resv2; +}; + +/* Skip updating fd indexes set to this value in the fd table */ +#define IORING_REGISTER_FILES_SKIP (-2) + +#define IO_URING_OP_SUPPORTED (1U << 0) + +struct io_uring_probe_op { + __u8 op; + __u8 resv; + __u16 flags; /* IO_URING_OP_* flags */ + __u32 resv2; +}; + +struct io_uring_probe { + __u8 last_op; /* last opcode supported */ + __u8 ops_len; /* length of ops[] array below */ + __u16 resv; + __u32 resv2[3]; + struct io_uring_probe_op ops[]; +}; + +struct io_uring_restriction { + __u16 opcode; + union { + __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */ + __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */ + __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */ + }; + __u8 resv; + __u32 resv2[3]; +}; + +struct io_uring_buf { + __u64 addr; + __u32 len; + __u16 bid; + __u16 resv; +}; + +struct io_uring_buf_ring { + union { + /* + * To avoid spilling into more pages than we need to, the + * ring tail is overlaid with the io_uring_buf->resv field. + */ + struct { + __u64 resv1; + __u32 resv2; + __u16 resv3; + __u16 tail; + }; + __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs); + }; +}; + +/* + * Flags for IORING_REGISTER_PBUF_RING. + * + * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring. + * The application must not set a ring_addr in struct + * io_uring_buf_reg, instead it must subsequently call + * mmap(2) with the offset set as: + * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT) + * to get a virtual mapping for the ring. + */ +enum { + IOU_PBUF_RING_MMAP = 1, +}; + +/* argument for IORING_(UN)REGISTER_PBUF_RING */ +struct io_uring_buf_reg { + __u64 ring_addr; + __u32 ring_entries; + __u16 bgid; + __u16 flags; + __u64 resv[3]; +}; + +/* + * io_uring_restriction->opcode values + */ +enum { + /* Allow an io_uring_register(2) opcode */ + IORING_RESTRICTION_REGISTER_OP = 0, + + /* Allow an sqe opcode */ + IORING_RESTRICTION_SQE_OP = 1, + + /* Allow sqe flags */ + IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2, + + /* Require sqe flags (these flags must be set on each submission) */ + IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3, + + IORING_RESTRICTION_LAST +}; + +struct io_uring_getevents_arg { + __u64 sigmask; + __u32 sigmask_sz; + __u32 pad; + __u64 ts; +}; + +/* + * Argument for IORING_REGISTER_SYNC_CANCEL + */ +struct io_uring_sync_cancel_reg { + __u64 addr; + __s32 fd; + __u32 flags; + struct __kernel_timespec timeout; + __u8 opcode; + __u8 pad[7]; + __u64 pad2[3]; +}; + +/* + * Argument for IORING_REGISTER_FILE_ALLOC_RANGE + * The range is specified as [off, off + len) + */ +struct io_uring_file_index_range { + __u32 off; + __u32 len; + __u64 resv; +}; + +struct io_uring_recvmsg_out { + __u32 namelen; + __u32 controllen; + __u32 payloadlen; + __u32 flags; +}; + +/* + * Argument for IORING_OP_URING_CMD when file is a socket + */ +enum { + SOCKET_URING_OP_SIOCINQ = 0, + SOCKET_URING_OP_SIOCOUTQ, + SOCKET_URING_OP_GETSOCKOPT, + SOCKET_URING_OP_SETSOCKOPT, +}; + +#ifdef __cplusplus +} +#endif + +#endif |