diff options
Diffstat (limited to 'tools/include')
| -rw-r--r-- | tools/include/linux/objtool.h | 17 | ||||
| -rw-r--r-- | tools/include/nolibc/Makefile | 37 | ||||
| -rw-r--r-- | tools/include/nolibc/stdio.h | 4 | ||||
| -rw-r--r-- | tools/include/nolibc/stdlib.h | 7 | ||||
| -rw-r--r-- | tools/include/uapi/asm-generic/fcntl.h | 11 | ||||
| -rw-r--r-- | tools/include/uapi/drm/i915_drm.h | 353 | ||||
| -rw-r--r-- | tools/include/uapi/linux/bpf.h | 11 | ||||
| -rw-r--r-- | tools/include/uapi/linux/kvm.h | 57 | ||||
| -rw-r--r-- | tools/include/uapi/linux/prctl.h | 9 | ||||
| -rw-r--r-- | tools/include/uapi/linux/vhost.h | 26 |
10 files changed, 426 insertions, 106 deletions
diff --git a/tools/include/linux/objtool.h b/tools/include/linux/objtool.h index 6491fa8fba6d..62c54ffbeeaa 100644 --- a/tools/include/linux/objtool.h +++ b/tools/include/linux/objtool.h @@ -32,11 +32,16 @@ struct unwind_hint { * * UNWIND_HINT_FUNC: Generate the unwind metadata of a callable function. * Useful for code which doesn't have an ELF function annotation. + * + * UNWIND_HINT_ENTRY: machine entry without stack, SYSCALL/SYSENTER etc. */ #define UNWIND_HINT_TYPE_CALL 0 #define UNWIND_HINT_TYPE_REGS 1 #define UNWIND_HINT_TYPE_REGS_PARTIAL 2 #define UNWIND_HINT_TYPE_FUNC 3 +#define UNWIND_HINT_TYPE_ENTRY 4 +#define UNWIND_HINT_TYPE_SAVE 5 +#define UNWIND_HINT_TYPE_RESTORE 6 #ifdef CONFIG_OBJTOOL @@ -62,7 +67,7 @@ struct unwind_hint { * It should only be used in special cases where you're 100% sure it won't * affect the reliability of frame pointers and kernel stack traces. * - * For more information, see tools/objtool/Documentation/stack-validation.txt. + * For more information, see tools/objtool/Documentation/objtool.txt. */ #define STACK_FRAME_NON_STANDARD(func) \ static void __used __section(".discard.func_stack_frame_non_standard") \ @@ -124,7 +129,7 @@ struct unwind_hint { * the debuginfo as necessary. It will also warn if it sees any * inconsistencies. */ -.macro UNWIND_HINT sp_reg:req sp_offset=0 type:req end=0 +.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 end=0 .Lunwind_hint_ip_\@: .pushsection .discard.unwind_hints /* struct unwind_hint */ @@ -143,6 +148,12 @@ struct unwind_hint { .popsection .endm +.macro STACK_FRAME_NON_STANDARD_FP func:req +#ifdef CONFIG_FRAME_POINTER + STACK_FRAME_NON_STANDARD \func +#endif +.endm + .macro ANNOTATE_NOENDBR .Lhere_\@: .pushsection .discard.noendbr @@ -171,7 +182,7 @@ struct unwind_hint { #define ASM_REACHABLE #else #define ANNOTATE_INTRA_FUNCTION_CALL -.macro UNWIND_HINT sp_reg:req sp_offset=0 type:req end=0 +.macro UNWIND_HINT type:req sp_reg=0 sp_offset=0 end=0 .endm .macro STACK_FRAME_NON_STANDARD func:req .endm diff --git a/tools/include/nolibc/Makefile b/tools/include/nolibc/Makefile index 7a16d917c185..cfd06764b5ae 100644 --- a/tools/include/nolibc/Makefile +++ b/tools/include/nolibc/Makefile @@ -7,13 +7,46 @@ ifeq ($(srctree),) srctree := $(patsubst %/tools/include/,%,$(dir $(CURDIR))) endif +# when run as make -C tools/ nolibc_<foo> the arch is not set +ifeq ($(ARCH),) +include $(srctree)/scripts/subarch.include +ARCH = $(SUBARCH) +endif + +# OUTPUT is only set when run from the main makefile, otherwise +# it defaults to this nolibc directory. +OUTPUT ?= $(CURDIR)/ + +ifeq ($(V),1) +Q= +else +Q=@ +endif + nolibc_arch := $(patsubst arm64,aarch64,$(ARCH)) arch_file := arch-$(nolibc_arch).h all_files := ctype.h errno.h nolibc.h signal.h std.h stdio.h stdlib.h string.h \ sys.h time.h types.h unistd.h # install all headers needed to support a bare-metal compiler -all: +all: headers + +install: help + +help: + @echo "Supported targets under nolibc:" + @echo " all call \"headers\"" + @echo " clean clean the sysroot" + @echo " headers prepare a sysroot in tools/include/nolibc/sysroot" + @echo " headers_standalone like \"headers\", and also install kernel headers" + @echo " help this help" + @echo "" + @echo "These targets may also be called from tools as \"make nolibc_<target>\"." + @echo "" + @echo "Currently using the following variables:" + @echo " ARCH = $(ARCH)" + @echo " OUTPUT = $(OUTPUT)" + @echo "" # Note: when ARCH is "x86" we concatenate both x86_64 and i386 headers: @@ -36,7 +69,7 @@ headers: headers_standalone: headers $(Q)$(MAKE) -C $(srctree) headers - $(Q)$(MAKE) -C $(srctree) headers_install INSTALL_HDR_PATH=$(OUTPUT)/sysroot + $(Q)$(MAKE) -C $(srctree) headers_install INSTALL_HDR_PATH=$(OUTPUT)sysroot clean: $(call QUIET_CLEAN, nolibc) rm -rf "$(OUTPUT)sysroot" diff --git a/tools/include/nolibc/stdio.h b/tools/include/nolibc/stdio.h index 15dedf8d0902..a3cebc4bc3ac 100644 --- a/tools/include/nolibc/stdio.h +++ b/tools/include/nolibc/stdio.h @@ -273,7 +273,7 @@ int vfprintf(FILE *stream, const char *fmt, va_list args) return written; } -static __attribute__((unused)) +static __attribute__((unused, format(printf, 2, 3))) int fprintf(FILE *stream, const char *fmt, ...) { va_list args; @@ -285,7 +285,7 @@ int fprintf(FILE *stream, const char *fmt, ...) return ret; } -static __attribute__((unused)) +static __attribute__((unused, format(printf, 1, 2))) int printf(const char *fmt, ...) { va_list args; diff --git a/tools/include/nolibc/stdlib.h b/tools/include/nolibc/stdlib.h index 8fd32eaf8037..92378c4b9660 100644 --- a/tools/include/nolibc/stdlib.h +++ b/tools/include/nolibc/stdlib.h @@ -128,10 +128,9 @@ void *malloc(size_t len) static __attribute__((unused)) void *calloc(size_t size, size_t nmemb) { - void *orig; - size_t res = 0; + size_t x = size * nmemb; - if (__builtin_expect(__builtin_mul_overflow(nmemb, size, &res), 0)) { + if (__builtin_expect(size && ((x / size) != nmemb), 0)) { SET_ERRNO(ENOMEM); return NULL; } @@ -140,7 +139,7 @@ void *calloc(size_t size, size_t nmemb) * No need to zero the heap, the MAP_ANONYMOUS in malloc() * already does it. */ - return malloc(res); + return malloc(x); } static __attribute__((unused)) diff --git a/tools/include/uapi/asm-generic/fcntl.h b/tools/include/uapi/asm-generic/fcntl.h index 0197042b7dfb..1ecdb911add8 100644 --- a/tools/include/uapi/asm-generic/fcntl.h +++ b/tools/include/uapi/asm-generic/fcntl.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ #ifndef _ASM_GENERIC_FCNTL_H #define _ASM_GENERIC_FCNTL_H @@ -90,7 +91,7 @@ /* a horrid kludge trying to make sure that this will fail on old kernels */ #define O_TMPFILE (__O_TMPFILE | O_DIRECTORY) -#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) +#define O_TMPFILE_MASK (__O_TMPFILE | O_DIRECTORY | O_CREAT) #ifndef O_NDELAY #define O_NDELAY O_NONBLOCK @@ -115,11 +116,13 @@ #define F_GETSIG 11 /* for sockets. */ #endif +#if __BITS_PER_LONG == 32 || defined(__KERNEL__) #ifndef F_GETLK64 #define F_GETLK64 12 /* using 'struct flock64' */ #define F_SETLK64 13 #define F_SETLKW64 14 #endif +#endif /* __BITS_PER_LONG == 32 || defined(__KERNEL__) */ #ifndef F_SETOWN_EX #define F_SETOWN_EX 15 @@ -178,6 +181,10 @@ struct f_owner_ex { blocking */ #define LOCK_UN 8 /* remove lock */ +/* + * LOCK_MAND support has been removed from the kernel. We leave the symbols + * here to not break legacy builds, but these should not be used in new code. + */ #define LOCK_MAND 32 /* This is a mandatory flock ... */ #define LOCK_READ 64 /* which allows concurrent read operations */ #define LOCK_WRITE 128 /* which allows concurrent write operations */ @@ -185,6 +192,7 @@ struct f_owner_ex { #define F_LINUX_SPECIFIC_BASE 1024 +#ifndef HAVE_ARCH_STRUCT_FLOCK struct flock { short l_type; short l_whence; @@ -209,5 +217,6 @@ struct flock64 { __ARCH_FLOCK64_PAD #endif }; +#endif /* HAVE_ARCH_STRUCT_FLOCK */ #endif /* _ASM_GENERIC_FCNTL_H */ diff --git a/tools/include/uapi/drm/i915_drm.h b/tools/include/uapi/drm/i915_drm.h index 239b91b13c60..b28ff5d88145 100644 --- a/tools/include/uapi/drm/i915_drm.h +++ b/tools/include/uapi/drm/i915_drm.h @@ -154,25 +154,77 @@ enum i915_mocs_table_index { I915_MOCS_CACHED, }; -/* +/** + * enum drm_i915_gem_engine_class - uapi engine type enumeration + * * Different engines serve different roles, and there may be more than one - * engine serving each role. enum drm_i915_gem_engine_class provides a - * classification of the role of the engine, which may be used when requesting - * operations to be performed on a certain subset of engines, or for providing - * information about that group. + * engine serving each role. This enum provides a classification of the role + * of the engine, which may be used when requesting operations to be performed + * on a certain subset of engines, or for providing information about that + * group. */ enum drm_i915_gem_engine_class { + /** + * @I915_ENGINE_CLASS_RENDER: + * + * Render engines support instructions used for 3D, Compute (GPGPU), + * and programmable media workloads. These instructions fetch data and + * dispatch individual work items to threads that operate in parallel. + * The threads run small programs (called "kernels" or "shaders") on + * the GPU's execution units (EUs). + */ I915_ENGINE_CLASS_RENDER = 0, + + /** + * @I915_ENGINE_CLASS_COPY: + * + * Copy engines (also referred to as "blitters") support instructions + * that move blocks of data from one location in memory to another, + * or that fill a specified location of memory with fixed data. + * Copy engines can perform pre-defined logical or bitwise operations + * on the source, destination, or pattern data. + */ I915_ENGINE_CLASS_COPY = 1, + + /** + * @I915_ENGINE_CLASS_VIDEO: + * + * Video engines (also referred to as "bit stream decode" (BSD) or + * "vdbox") support instructions that perform fixed-function media + * decode and encode. + */ I915_ENGINE_CLASS_VIDEO = 2, + + /** + * @I915_ENGINE_CLASS_VIDEO_ENHANCE: + * + * Video enhancement engines (also referred to as "vebox") support + * instructions related to image enhancement. + */ I915_ENGINE_CLASS_VIDEO_ENHANCE = 3, - /* should be kept compact */ + /** + * @I915_ENGINE_CLASS_COMPUTE: + * + * Compute engines support a subset of the instructions available + * on render engines: compute engines support Compute (GPGPU) and + * programmable media workloads, but do not support the 3D pipeline. + */ + I915_ENGINE_CLASS_COMPUTE = 4, + + /* Values in this enum should be kept compact. */ + /** + * @I915_ENGINE_CLASS_INVALID: + * + * Placeholder value to represent an invalid engine class assignment. + */ I915_ENGINE_CLASS_INVALID = -1 }; -/* +/** + * struct i915_engine_class_instance - Engine class/instance identifier + * * There may be more than one engine fulfilling any role within the system. * Each engine of a class is given a unique instance number and therefore * any engine can be specified by its class:instance tuplet. APIs that allow @@ -180,10 +232,21 @@ enum drm_i915_gem_engine_class { * for this identification. */ struct i915_engine_class_instance { - __u16 engine_class; /* see enum drm_i915_gem_engine_class */ - __u16 engine_instance; + /** + * @engine_class: + * + * Engine class from enum drm_i915_gem_engine_class + */ + __u16 engine_class; #define I915_ENGINE_CLASS_INVALID_NONE -1 #define I915_ENGINE_CLASS_INVALID_VIRTUAL -2 + + /** + * @engine_instance: + * + * Engine instance. + */ + __u16 engine_instance; }; /** @@ -2657,24 +2720,65 @@ enum drm_i915_perf_record_type { DRM_I915_PERF_RECORD_MAX /* non-ABI */ }; -/* +/** + * struct drm_i915_perf_oa_config + * * Structure to upload perf dynamic configuration into the kernel. */ struct drm_i915_perf_oa_config { - /** String formatted like "%08x-%04x-%04x-%04x-%012x" */ + /** + * @uuid: + * + * String formatted like "%\08x-%\04x-%\04x-%\04x-%\012x" + */ char uuid[36]; + /** + * @n_mux_regs: + * + * Number of mux regs in &mux_regs_ptr. + */ __u32 n_mux_regs; + + /** + * @n_boolean_regs: + * + * Number of boolean regs in &boolean_regs_ptr. + */ __u32 n_boolean_regs; + + /** + * @n_flex_regs: + * + * Number of flex regs in &flex_regs_ptr. + */ __u32 n_flex_regs; - /* - * These fields are pointers to tuples of u32 values (register address, - * value). For example the expected length of the buffer pointed by - * mux_regs_ptr is (2 * sizeof(u32) * n_mux_regs). + /** + * @mux_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_mux_regs). */ __u64 mux_regs_ptr; + + /** + * @boolean_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_boolean_regs). + */ __u64 boolean_regs_ptr; + + /** + * @flex_regs_ptr: + * + * Pointer to tuples of u32 values (register address, value) for mux + * registers. Expected length of buffer is (2 * sizeof(u32) * + * &n_flex_regs). + */ __u64 flex_regs_ptr; }; @@ -2685,12 +2789,24 @@ struct drm_i915_perf_oa_config { * @data_ptr is also depends on the specific @query_id. */ struct drm_i915_query_item { - /** @query_id: The id for this query */ + /** + * @query_id: + * + * The id for this query. Currently accepted query IDs are: + * - %DRM_I915_QUERY_TOPOLOGY_INFO (see struct drm_i915_query_topology_info) + * - %DRM_I915_QUERY_ENGINE_INFO (see struct drm_i915_engine_info) + * - %DRM_I915_QUERY_PERF_CONFIG (see struct drm_i915_query_perf_config) + * - %DRM_I915_QUERY_MEMORY_REGIONS (see struct drm_i915_query_memory_regions) + * - %DRM_I915_QUERY_HWCONFIG_BLOB (see `GuC HWCONFIG blob uAPI`) + * - %DRM_I915_QUERY_GEOMETRY_SUBSLICES (see struct drm_i915_query_topology_info) + */ __u64 query_id; -#define DRM_I915_QUERY_TOPOLOGY_INFO 1 -#define DRM_I915_QUERY_ENGINE_INFO 2 -#define DRM_I915_QUERY_PERF_CONFIG 3 -#define DRM_I915_QUERY_MEMORY_REGIONS 4 +#define DRM_I915_QUERY_TOPOLOGY_INFO 1 +#define DRM_I915_QUERY_ENGINE_INFO 2 +#define DRM_I915_QUERY_PERF_CONFIG 3 +#define DRM_I915_QUERY_MEMORY_REGIONS 4 +#define DRM_I915_QUERY_HWCONFIG_BLOB 5 +#define DRM_I915_QUERY_GEOMETRY_SUBSLICES 6 /* Must be kept compact -- no holes and well documented */ /** @@ -2706,14 +2822,17 @@ struct drm_i915_query_item { /** * @flags: * - * When query_id == DRM_I915_QUERY_TOPOLOGY_INFO, must be 0. + * When &query_id == %DRM_I915_QUERY_TOPOLOGY_INFO, must be 0. * - * When query_id == DRM_I915_QUERY_PERF_CONFIG, must be one of the + * When &query_id == %DRM_I915_QUERY_PERF_CONFIG, must be one of the * following: * - * - DRM_I915_QUERY_PERF_CONFIG_LIST - * - DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID - * - DRM_I915_QUERY_PERF_CONFIG_FOR_UUID + * - %DRM_I915_QUERY_PERF_CONFIG_LIST + * - %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID + * - %DRM_I915_QUERY_PERF_CONFIG_FOR_UUID + * + * When &query_id == %DRM_I915_QUERY_GEOMETRY_SUBSLICES must contain + * a struct i915_engine_class_instance that references a render engine. */ __u32 flags; #define DRM_I915_QUERY_PERF_CONFIG_LIST 1 @@ -2771,66 +2890,112 @@ struct drm_i915_query { __u64 items_ptr; }; -/* - * Data written by the kernel with query DRM_I915_QUERY_TOPOLOGY_INFO : - * - * data: contains the 3 pieces of information : - * - * - the slice mask with one bit per slice telling whether a slice is - * available. The availability of slice X can be queried with the following - * formula : - * - * (data[X / 8] >> (X % 8)) & 1 - * - * - the subslice mask for each slice with one bit per subslice telling - * whether a subslice is available. Gen12 has dual-subslices, which are - * similar to two gen11 subslices. For gen12, this array represents dual- - * subslices. The availability of subslice Y in slice X can be queried - * with the following formula : - * - * (data[subslice_offset + - * X * subslice_stride + - * Y / 8] >> (Y % 8)) & 1 - * - * - the EU mask for each subslice in each slice with one bit per EU telling - * whether an EU is available. The availability of EU Z in subslice Y in - * slice X can be queried with the following formula : +/** + * struct drm_i915_query_topology_info * - * (data[eu_offset + - * (X * max_subslices + Y) * eu_stride + - * Z / 8] >> (Z % 8)) & 1 + * Describes slice/subslice/EU information queried by + * %DRM_I915_QUERY_TOPOLOGY_INFO */ struct drm_i915_query_topology_info { - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u16 flags; + /** + * @max_slices: + * + * The number of bits used to express the slice mask. + */ __u16 max_slices; + + /** + * @max_subslices: + * + * The number of bits used to express the subslice mask. + */ __u16 max_subslices; + + /** + * @max_eus_per_subslice: + * + * The number of bits in the EU mask that correspond to a single + * subslice's EUs. + */ __u16 max_eus_per_subslice; - /* + /** + * @subslice_offset: + * * Offset in data[] at which the subslice masks are stored. */ __u16 subslice_offset; - /* + /** + * @subslice_stride: + * * Stride at which each of the subslice masks for each slice are * stored. */ __u16 subslice_stride; - /* + /** + * @eu_offset: + * * Offset in data[] at which the EU masks are stored. */ __u16 eu_offset; - /* + /** + * @eu_stride: + * * Stride at which each of the EU masks for each subslice are stored. */ __u16 eu_stride; + /** + * @data: + * + * Contains 3 pieces of information : + * + * - The slice mask with one bit per slice telling whether a slice is + * available. The availability of slice X can be queried with the + * following formula : + * + * .. code:: c + * + * (data[X / 8] >> (X % 8)) & 1 + * + * Starting with Xe_HP platforms, Intel hardware no longer has + * traditional slices so i915 will always report a single slice + * (hardcoded slicemask = 0x1) which contains all of the platform's + * subslices. I.e., the mask here does not reflect any of the newer + * hardware concepts such as "gslices" or "cslices" since userspace + * is capable of inferring those from the subslice mask. + * + * - The subslice mask for each slice with one bit per subslice telling + * whether a subslice is available. Starting with Gen12 we use the + * term "subslice" to refer to what the hardware documentation + * describes as a "dual-subslices." The availability of subslice Y + * in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[subslice_offset + X * subslice_stride + Y / 8] >> (Y % 8)) & 1 + * + * - The EU mask for each subslice in each slice, with one bit per EU + * telling whether an EU is available. The availability of EU Z in + * subslice Y in slice X can be queried with the following formula : + * + * .. code:: c + * + * (data[eu_offset + + * (X * max_subslices + Y) * eu_stride + + * Z / 8 + * ] >> (Z % 8)) & 1 + */ __u8 data[]; }; @@ -2951,52 +3116,68 @@ struct drm_i915_query_engine_info { struct drm_i915_engine_info engines[]; }; -/* - * Data written by the kernel with query DRM_I915_QUERY_PERF_CONFIG. +/** + * struct drm_i915_query_perf_config + * + * Data written by the kernel with query %DRM_I915_QUERY_PERF_CONFIG and + * %DRM_I915_QUERY_GEOMETRY_SUBSLICES. */ struct drm_i915_query_perf_config { union { - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets - * this fields to the number of configurations available. + /** + * @n_configs: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_LIST, i915 sets this fields to + * the number of configurations available. */ __u64 n_configs; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @config: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_ID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. */ __u64 config; - /* - * When query_id == DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, - * i915 will use the value in this field as configuration - * identifier to decide what data to write into config_ptr. + /** + * @uuid: + * + * When &drm_i915_query_item.flags == + * %DRM_I915_QUERY_PERF_CONFIG_DATA_FOR_UUID, i915 will use the + * value in this field as configuration identifier to decide + * what data to write into config_ptr. * * String formatted like "%08x-%04x-%04x-%04x-%012x" */ char uuid[36]; }; - /* + /** + * @flags: + * * Unused for now. Must be cleared to zero. */ __u32 flags; - /* - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_LIST, i915 will - * write an array of __u64 of configuration identifiers. + /** + * @data: * - * When query_item.flags == DRM_I915_QUERY_PERF_CONFIG_DATA, i915 will - * write a struct drm_i915_perf_oa_config. If the following fields of - * drm_i915_perf_oa_config are set not set to 0, i915 will write into - * the associated pointers the values of submitted when the + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_LIST, + * i915 will write an array of __u64 of configuration identifiers. + * + * When &drm_i915_query_item.flags == %DRM_I915_QUERY_PERF_CONFIG_DATA, + * i915 will write a struct drm_i915_perf_oa_config. If the following + * fields of struct drm_i915_perf_oa_config are not set to 0, i915 will + * write into the associated pointers the values of submitted when the * configuration was created : * - * - n_mux_regs - * - n_boolean_regs - * - n_flex_regs + * - &drm_i915_perf_oa_config.n_mux_regs + * - &drm_i915_perf_oa_config.n_boolean_regs + * - &drm_i915_perf_oa_config.n_flex_regs */ __u8 data[]; }; @@ -3135,6 +3316,16 @@ struct drm_i915_query_memory_regions { }; /** + * DOC: GuC HWCONFIG blob uAPI + * + * The GuC produces a blob with information about the current device. + * i915 reads this blob from GuC and makes it available via this uAPI. + * + * The format and meaning of the blob content are documented in the + * Programmer's Reference Manual. + */ + +/** * struct drm_i915_gem_create_ext - Existing gem_create behaviour, with added * extension support using struct i915_user_extension. * diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index f4009dbdf62d..ef78e0e1a754 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -5222,22 +5222,25 @@ union bpf_attr { * Return * Nothing. Always succeeds. * - * long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset) + * long bpf_dynptr_read(void *dst, u32 len, struct bpf_dynptr *src, u32 offset, u64 flags) * Description * Read *len* bytes from *src* into *dst*, starting from *offset* * into *src*. + * *flags* is currently unused. * Return * 0 on success, -E2BIG if *offset* + *len* exceeds the length - * of *src*'s data, -EINVAL if *src* is an invalid dynptr. + * of *src*'s data, -EINVAL if *src* is an invalid dynptr or if + * *flags* is not 0. * - * long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len) + * long bpf_dynptr_write(struct bpf_dynptr *dst, u32 offset, void *src, u32 len, u64 flags) * Description * Write *len* bytes from *src* into *dst*, starting from *offset* * into *dst*. + * *flags* is currently unused. * Return * 0 on success, -E2BIG if *offset* + *len* exceeds the length * of *dst*'s data, -EINVAL if *dst* is an invalid dynptr or if *dst* - * is a read-only dynptr. + * is a read-only dynptr or if *flags* is not 0. * * void *bpf_dynptr_data(struct bpf_dynptr *ptr, u32 offset, u32 len) * Description diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 37ce8cbac322..cb6e3846d27b 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -444,6 +444,9 @@ struct kvm_run { #define KVM_SYSTEM_EVENT_SHUTDOWN 1 #define KVM_SYSTEM_EVENT_RESET 2 #define KVM_SYSTEM_EVENT_CRASH 3 +#define KVM_SYSTEM_EVENT_WAKEUP 4 +#define KVM_SYSTEM_EVENT_SUSPEND 5 +#define KVM_SYSTEM_EVENT_SEV_TERM 6 __u32 type; __u32 ndata; union { @@ -646,6 +649,7 @@ struct kvm_vapic_addr { #define KVM_MP_STATE_OPERATING 7 #define KVM_MP_STATE_LOAD 8 #define KVM_MP_STATE_AP_RESET_HOLD 9 +#define KVM_MP_STATE_SUSPENDED 10 struct kvm_mp_state { __u32 mp_state; @@ -1150,8 +1154,9 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_S390_MEM_OP_EXTENSION 211 #define KVM_CAP_PMU_CAPABILITY 212 #define KVM_CAP_DISABLE_QUIRKS2 213 -/* #define KVM_CAP_VM_TSC_CONTROL 214 */ +#define KVM_CAP_VM_TSC_CONTROL 214 #define KVM_CAP_SYSTEM_EVENT_DATA 215 +#define KVM_CAP_ARM_SYSTEM_SUSPEND 216 #ifdef KVM_CAP_IRQ_ROUTING @@ -1240,6 +1245,7 @@ struct kvm_x86_mce { #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) #define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) +#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5) struct kvm_xen_hvm_config { __u32 flags; @@ -1478,7 +1484,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) /* Available with KVM_CAP_PPC_GET_PVINFO */ #define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) -/* Available with KVM_CAP_TSC_CONTROL */ +/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with +* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */ #define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) #define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) /* Available with KVM_CAP_PCI_2_3 */ @@ -1694,6 +1701,32 @@ struct kvm_xen_hvm_attr { struct { __u64 gfn; } shared_info; + struct { + __u32 send_port; + __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */ + __u32 flags; +#define KVM_XEN_EVTCHN_DEASSIGN (1 << 0) +#define KVM_XEN_EVTCHN_UPDATE (1 << 1) +#define KVM_XEN_EVTCHN_RESET (1 << 2) + /* + * Events sent by the guest are either looped back to + * the guest itself (potentially on a different port#) + * or signalled via an eventfd. + */ + union { + struct { + __u32 port; + __u32 vcpu; + __u32 priority; + } port; + struct { + __u32 port; /* Zero for eventfd */ + __s32 fd; + } eventfd; + __u32 padding[4]; + } deliver; + } evtchn; + __u32 xen_version; __u64 pad[8]; } u; }; @@ -1702,11 +1735,17 @@ struct kvm_xen_hvm_attr { #define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0 #define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1 #define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3 +#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4 /* Per-vCPU Xen attributes */ #define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr) #define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr) +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn) + #define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2) #define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2) @@ -1724,6 +1763,13 @@ struct kvm_xen_vcpu_attr { __u64 time_blocked; __u64 time_offline; } runstate; + __u32 vcpu_id; + struct { + __u32 port; + __u32 priority; + __u64 expires_ns; + } timer; + __u8 vector; } u; }; @@ -1734,6 +1780,10 @@ struct kvm_xen_vcpu_attr { #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4 #define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5 +/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */ +#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6 +#define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7 +#define KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 0x8 /* Secure Encrypted Virtualization command */ enum sev_cmd_id { @@ -2033,7 +2083,8 @@ struct kvm_stats_header { #define KVM_STATS_UNIT_BYTES (0x1 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT) #define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT) -#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES +#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT) +#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN #define KVM_STATS_BASE_SHIFT 8 #define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT) diff --git a/tools/include/uapi/linux/prctl.h b/tools/include/uapi/linux/prctl.h index e998764f0262..a5e06dcbba13 100644 --- a/tools/include/uapi/linux/prctl.h +++ b/tools/include/uapi/linux/prctl.h @@ -272,6 +272,15 @@ struct prctl_mm_map { # define PR_SCHED_CORE_SCOPE_THREAD_GROUP 1 # define PR_SCHED_CORE_SCOPE_PROCESS_GROUP 2 +/* arm64 Scalable Matrix Extension controls */ +/* Flag values must be in sync with SVE versions */ +#define PR_SME_SET_VL 63 /* set task vector length */ +# define PR_SME_SET_VL_ONEXEC (1 << 18) /* defer effect until exec */ +#define PR_SME_GET_VL 64 /* get task vector length */ +/* Bits common to PR_SME_SET_VL and PR_SME_GET_VL */ +# define PR_SME_VL_LEN_MASK 0xffff +# define PR_SME_VL_INHERIT (1 << 17) /* inherit across exec */ + #define PR_SET_VMA 0x53564d41 # define PR_SET_VMA_ANON_NAME 0 diff --git a/tools/include/uapi/linux/vhost.h b/tools/include/uapi/linux/vhost.h index 5d99e7c242a2..cab645d4a645 100644 --- a/tools/include/uapi/linux/vhost.h +++ b/tools/include/uapi/linux/vhost.h @@ -89,11 +89,6 @@ /* Set or get vhost backend capability */ -/* Use message type V2 */ -#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1 -/* IOTLB can accept batching hints */ -#define VHOST_BACKEND_F_IOTLB_BATCH 0x2 - #define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64) #define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64) @@ -150,11 +145,30 @@ /* Get the valid iova range */ #define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \ struct vhost_vdpa_iova_range) - /* Get the config size */ #define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32) /* Get the count of all virtqueues */ #define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32) +/* Get the number of virtqueue groups. */ +#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32) + +/* Get the number of address spaces. */ +#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int) + +/* Get the group for a virtqueue: read index, write group in num, + * The virtqueue index is stored in the index field of + * vhost_vring_state. The group for this specific virtqueue is + * returned via num field of vhost_vring_state. + */ +#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \ + struct vhost_vring_state) +/* Set the ASID for a virtqueue group. The group index is stored in + * the index field of vhost_vring_state, the ASID associated with this + * group is stored at num field of vhost_vring_state. + */ +#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \ + struct vhost_vring_state) + #endif |