diff options
Diffstat (limited to 'tools/testing/selftests/net/forwarding/lib.sh')
| -rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 383 |
1 files changed, 295 insertions, 88 deletions
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index e579c2e0c462..112c85c35092 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -2,33 +2,124 @@ # SPDX-License-Identifier: GPL-2.0 ############################################################################## +# Topology description. p1 looped back to p2, p3 to p4 and so on. + +declare -A NETIFS=( + [p1]=veth0 + [p2]=veth1 + [p3]=veth2 + [p4]=veth3 + [p5]=veth4 + [p6]=veth5 + [p7]=veth6 + [p8]=veth7 + [p9]=veth8 + [p10]=veth9 +) + +# Port that does not have a cable connected. +: "${NETIF_NO_CABLE:=eth8}" + +############################################################################## # Defines -# Can be overridden by the configuration file. -PING=${PING:=ping} -PING6=${PING6:=ping6} -MZ=${MZ:=mausezahn} -MZ_DELAY=${MZ_DELAY:=0} -ARPING=${ARPING:=arping} -TEAMD=${TEAMD:=teamd} -WAIT_TIME=${WAIT_TIME:=5} -PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} -PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} -NETIF_TYPE=${NETIF_TYPE:=veth} -NETIF_CREATE=${NETIF_CREATE:=yes} -MCD=${MCD:=smcrouted} -MC_CLI=${MC_CLI:=smcroutectl} -PING_COUNT=${PING_COUNT:=10} -PING_TIMEOUT=${PING_TIMEOUT:=5} -WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} -INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} -LOW_AGEING_TIME=${LOW_AGEING_TIME:=1000} -REQUIRE_JQ=${REQUIRE_JQ:=yes} -REQUIRE_MZ=${REQUIRE_MZ:=yes} -REQUIRE_MTOOLS=${REQUIRE_MTOOLS:=no} -STABLE_MAC_ADDRS=${STABLE_MAC_ADDRS:=no} -TCPDUMP_EXTRA_FLAGS=${TCPDUMP_EXTRA_FLAGS:=} -TROUTE6=${TROUTE6:=traceroute6} +# Networking utilities. +: "${PING:=ping}" +: "${PING6:=ping6}" # Some distros just use ping. +: "${ARPING:=arping}" +: "${TROUTE6:=traceroute6}" + +# Packet generator. +: "${MZ:=mausezahn}" # Some distributions use 'mz'. +: "${MZ_DELAY:=0}" + +# Host configuration tools. +: "${TEAMD:=teamd}" +: "${MCD:=smcrouted}" +: "${MC_CLI:=smcroutectl}" + +# Constants for netdevice bring-up: +# Default time in seconds to wait for an interface to come up before giving up +# and bailing out. Used during initial setup. +: "${INTERFACE_TIMEOUT:=600}" +# Like INTERFACE_TIMEOUT, but default for ad-hoc waiting in testing scripts. +: "${WAIT_TIMEOUT:=20}" +# Time to wait after interfaces participating in the test are all UP. +: "${WAIT_TIME:=5}" + +# Whether to pause on, respectively, after a failure and before cleanup. +: "${PAUSE_ON_FAIL:=no}" +: "${PAUSE_ON_CLEANUP:=no}" + +# Whether to create virtual interfaces, and what netdevice type they should be. +: "${NETIF_CREATE:=yes}" +: "${NETIF_TYPE:=veth}" + +# Constants for ping tests: +# How many packets should be sent. +: "${PING_COUNT:=10}" +# Timeout (in seconds) before ping exits regardless of how many packets have +# been sent or received +: "${PING_TIMEOUT:=5}" + +# Minimum ageing_time (in centiseconds) supported by hardware +: "${LOW_AGEING_TIME:=1000}" + +# Whether to check for availability of certain tools. +: "${REQUIRE_JQ:=yes}" +: "${REQUIRE_MZ:=yes}" +: "${REQUIRE_MTOOLS:=no}" + +# Whether to override MAC addresses on interfaces participating in the test. +: "${STABLE_MAC_ADDRS:=no}" + +# Flags for tcpdump +: "${TCPDUMP_EXTRA_FLAGS:=}" + +# Flags for TC filters. +: "${TC_FLAG:=skip_hw}" + +# Whether the machine is "slow" -- i.e. might be incapable of running tests +# involving heavy traffic. This might be the case on a debug kernel, a VM, or +# e.g. a low-power board. +: "${KSFT_MACHINE_SLOW:=no}" + +############################################################################## +# Find netifs by test-specified driver name + +driver_name_get() +{ + local dev=$1; shift + local driver_path="/sys/class/net/$dev/device/driver" + + if [[ -L $driver_path ]]; then + basename `realpath $driver_path` + fi +} + +netif_find_driver() +{ + local ifnames=`ip -j link show | jq -r ".[].ifname"` + local count=0 + + for ifname in $ifnames + do + local driver_name=`driver_name_get $ifname` + if [[ ! -z $driver_name && $driver_name == $NETIF_FIND_DRIVER ]]; then + count=$((count + 1)) + NETIFS[p$count]="$ifname" + fi + done +} + +# Whether to find netdevice according to the driver speficied by the importer +: "${NETIF_FIND_DRIVER:=}" + +if [[ $NETIF_FIND_DRIVER ]]; then + unset NETIFS + declare -A NETIFS + netif_find_driver +fi net_forwarding_dir=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") @@ -41,27 +132,9 @@ source "$net_forwarding_dir/../lib.sh" # timeout in seconds slowwait() { - local timeout=$1; shift - - local start_time="$(date -u +%s)" - while true - do - local out - out=$("$@") - local ret=$? - if ((!ret)); then - echo -n "$out" - return 0 - fi - - local current_time="$(date -u +%s)" - if ((current_time - start_time > timeout)); then - echo -n "$out" - return 1 - fi + local timeout_sec=$1; shift - sleep 0.1 - done + loopy_wait "sleep 0.1" "$((timeout_sec * 1000))" "$@" } ############################################################################## @@ -205,22 +278,23 @@ check_port_mab_support() fi } -skip_on_veth() +if [[ "$(id -u)" -ne 0 ]]; then + echo "SKIP: need root privileges" + exit $ksft_skip +fi + +check_driver() { - local kind=$(ip -j -d link show dev ${NETIFS[p1]} | - jq -r '.[].linkinfo.info_kind') + local dev=$1; shift + local expected=$1; shift + local driver_name=`driver_name_get $dev` - if [[ $kind == veth ]]; then - echo "SKIP: Test cannot be run with veth pairs" + if [[ $driver_name != $expected ]]; then + echo "SKIP: expected driver $expected for $dev, got $driver_name instead" exit $ksft_skip fi } -if [[ "$(id -u)" -ne 0 ]]; then - echo "SKIP: need root privileges" - exit $ksft_skip -fi - if [[ "$CHECK_TC" = "yes" ]]; then check_tc_version fi @@ -235,6 +309,21 @@ require_command() fi } +# IPv6 support was added in v3.0 +check_mtools_version() +{ + local version="$(msend -v)" + local major + + version=${version##msend version } + major=$(echo $version | cut -d. -f1) + + if [ $major -lt 3 ]; then + echo "SKIP: expected mtools version 3.0, got $version" + exit $ksft_skip + fi +} + if [[ "$REQUIRE_JQ" = "yes" ]]; then require_command jq fi @@ -242,15 +331,10 @@ if [[ "$REQUIRE_MZ" = "yes" ]]; then require_command $MZ fi if [[ "$REQUIRE_MTOOLS" = "yes" ]]; then - # https://github.com/vladimiroltean/mtools/ - # patched for IPv6 support + # https://github.com/troglobit/mtools require_command msend require_command mreceive -fi - -if [[ ! -v NUM_NETIFS ]]; then - echo "SKIP: importer does not define \"NUM_NETIFS\"" - exit $ksft_skip + check_mtools_version fi ############################################################################## @@ -271,6 +355,23 @@ done ############################################################################## # Network interfaces configuration +if [[ ! -v NUM_NETIFS ]]; then + echo "SKIP: importer does not define \"NUM_NETIFS\"" + exit $ksft_skip +fi + +if (( NUM_NETIFS > ${#NETIFS[@]} )); then + echo "SKIP: Importer requires $NUM_NETIFS NETIFS, but only ${#NETIFS[@]} are defined (${NETIFS[@]})" + exit $ksft_skip +fi + +for i in $(seq ${#NETIFS[@]}); do + if [[ ! ${NETIFS[p$i]} ]]; then + echo "SKIP: NETIFS[p$i] not given" + exit $ksft_skip + fi +done + create_netif_veth() { local i @@ -358,14 +459,31 @@ EXIT_STATUS=0 # Per-test return value. Clear at the beginning of each test. RET=0 +ret_set_ksft_status() +{ + local ksft_status=$1; shift + local msg=$1; shift + + RET=$(ksft_status_merge $RET $ksft_status) + if (( $? )); then + retmsg=$msg + fi +} + +# Whether FAILs should be interpreted as XFAILs. Internal. +FAIL_TO_XFAIL= + check_err() { local err=$1 local msg=$2 - if [[ $RET -eq 0 && $err -ne 0 ]]; then - RET=$err - retmsg=$msg + if ((err)); then + if [[ $FAIL_TO_XFAIL = yes ]]; then + ret_set_ksft_status $ksft_xfail "$msg" + else + ret_set_ksft_status $ksft_fail "$msg" + fi fi } @@ -374,10 +492,7 @@ check_fail() local err=$1 local msg=$2 - if [[ $RET -eq 0 && $err -eq 0 ]]; then - RET=1 - retmsg=$msg - fi + check_err $((!err)) "$msg" } check_err_fail() @@ -393,6 +508,85 @@ check_err_fail() fi } +xfail_on_slow() +{ + if [[ $KSFT_MACHINE_SLOW = yes ]]; then + FAIL_TO_XFAIL=yes "$@" + else + "$@" + fi +} + +xfail_on_veth() +{ + local dev=$1; shift + local kind + + kind=$(ip -j -d link show dev $dev | + jq -r '.[].linkinfo.info_kind') + if [[ $kind = veth ]]; then + FAIL_TO_XFAIL=yes "$@" + else + "$@" + fi +} + +log_test_result() +{ + local test_name=$1; shift + local opt_str=$1; shift + local result=$1; shift + local retmsg=$1; shift + + printf "TEST: %-60s [%s]\n" "$test_name $opt_str" "$result" + if [[ $retmsg ]]; then + printf "\t%s\n" "$retmsg" + fi +} + +pause_on_fail() +{ + if [[ $PAUSE_ON_FAIL == yes ]]; then + echo "Hit enter to continue, 'q' to quit" + read a + [[ $a == q ]] && exit 1 + fi +} + +handle_test_result_pass() +{ + local test_name=$1; shift + local opt_str=$1; shift + + log_test_result "$test_name" "$opt_str" " OK " +} + +handle_test_result_fail() +{ + local test_name=$1; shift + local opt_str=$1; shift + + log_test_result "$test_name" "$opt_str" FAIL "$retmsg" + pause_on_fail +} + +handle_test_result_xfail() +{ + local test_name=$1; shift + local opt_str=$1; shift + + log_test_result "$test_name" "$opt_str" XFAIL "$retmsg" + pause_on_fail +} + +handle_test_result_skip() +{ + local test_name=$1; shift + local opt_str=$1; shift + + log_test_result "$test_name" "$opt_str" SKIP "$retmsg" +} + log_test() { local test_name=$1 @@ -402,31 +596,28 @@ log_test() opt_str="($opt_str)" fi - if [[ $RET -ne 0 ]]; then - EXIT_STATUS=1 - printf "TEST: %-60s [FAIL]\n" "$test_name $opt_str" - if [[ ! -z "$retmsg" ]]; then - printf "\t%s\n" "$retmsg" - fi - if [ "${PAUSE_ON_FAIL}" = "yes" ]; then - echo "Hit enter to continue, 'q' to quit" - read a - [ "$a" = "q" ] && exit 1 - fi - return 1 + if ((RET == ksft_pass)); then + handle_test_result_pass "$test_name" "$opt_str" + elif ((RET == ksft_xfail)); then + handle_test_result_xfail "$test_name" "$opt_str" + elif ((RET == ksft_skip)); then + handle_test_result_skip "$test_name" "$opt_str" + else + handle_test_result_fail "$test_name" "$opt_str" fi - printf "TEST: %-60s [ OK ]\n" "$test_name $opt_str" - return 0 + EXIT_STATUS=$(ksft_exit_status_merge $EXIT_STATUS $RET) + return $RET } log_test_skip() { - local test_name=$1 - local opt_str=$2 + RET=$ksft_skip retmsg= log_test "$@" +} - printf "TEST: %-60s [SKIP]\n" "$test_name $opt_str" - return 0 +log_test_xfail() +{ + RET=$ksft_xfail retmsg= log_test "$@" } log_info() @@ -562,6 +753,19 @@ setup_wait() sleep $WAIT_TIME } +wait_for_dev() +{ + local dev=$1; shift + local timeout=${1:-$WAIT_TIMEOUT}; shift + + slowwait $timeout ip link show dev $dev &> /dev/null + if (( $? )); then + check_err 1 + log_test wait_for_dev "Interface $dev did not appear." + exit $EXIT_STATUS + fi +} + cmd_jq() { local cmd=$1 @@ -2011,6 +2215,8 @@ bail_on_lldpad() { local reason1="$1"; shift local reason2="$1"; shift + local caller=${FUNCNAME[1]} + local src=${BASH_SOURCE[1]} if systemctl is-active --quiet lldpad; then @@ -2031,7 +2237,8 @@ bail_on_lldpad() an environment variable ALLOW_LLDPAD to a non-empty string. EOF - exit 1 + log_test_skip $src:$caller + exit $EXIT_STATUS else return fi |