diff options
Diffstat (limited to 'tools')
-rw-r--r-- | tools/testing/selftests/net/Makefile | 1 | ||||
-rwxr-xr-x | tools/testing/selftests/net/srv6_end_flavors_test.sh | 869 |
2 files changed, 870 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 3364c548a23b..6cd8993454d7 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -38,6 +38,7 @@ TEST_PROGS += srv6_end_dt6_l3vpn_test.sh TEST_PROGS += srv6_hencap_red_l3vpn_test.sh TEST_PROGS += srv6_hl2encap_red_l2vpn_test.sh TEST_PROGS += srv6_end_next_csid_l3vpn_test.sh +TEST_PROGS += srv6_end_flavors_test.sh TEST_PROGS += vrf_strict_mode_test.sh TEST_PROGS += arp_ndisc_evict_nocarrier.sh TEST_PROGS += ndisc_unsolicited_na_test.sh diff --git a/tools/testing/selftests/net/srv6_end_flavors_test.sh b/tools/testing/selftests/net/srv6_end_flavors_test.sh new file mode 100755 index 000000000000..50563443a4ad --- /dev/null +++ b/tools/testing/selftests/net/srv6_end_flavors_test.sh @@ -0,0 +1,869 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# author: Andrea Mayer <andrea.mayer@uniroma2.it> +# author: Paolo Lungaroni <paolo.lungaroni@uniroma2.it> +# +# This script is designed to test the support for "flavors" in the SRv6 End +# behavior. +# +# Flavors defined in RFC8986 [1] represent additional operations that can modify +# or extend the existing SRv6 End, End.X and End.T behaviors. For the sake of +# convenience, we report the list of flavors described in [1] hereafter: +# - Penultimate Segment Pop (PSP); +# - Ultimate Segment Pop (USP); +# - Ultimate Segment Decapsulation (USD). +# +# The End, End.X, and End.T behaviors can support these flavors either +# individually or in combinations. +# Currently in this selftest we consider only the PSP flavor for the SRv6 End +# behavior. However, it is possible to extend the script as soon as other +# flavors will be supported in the kernel. +# +# The purpose of the PSP flavor consists in instructing the penultimate node +# listed in the SRv6 policy to remove (i.e. pop) the outermost SRH from the IPv6 +# header. +# A PSP enabled SRv6 End behavior instance processes the SRH by: +# - decrementing the Segment Left (SL) value from 1 to 0; +# - copying the last SID from the SID List into the IPv6 Destination Address +# (DA); +# - removing the SRH from the extension headers following the IPv6 header. +# +# Once the SRH is removed, the IPv6 packet is forwarded to the destination using +# the IPv6 DA updated during the PSP operation (i.e. the IPv6 DA corresponding +# to the last SID carried by the removed SRH). +# +# Although the PSP flavor can be set for any SRv6 End behavior instance on any +# SR node, it will be active only on such behaviors bound to a penultimate SID +# for a given SRv6 policy. +# SL=2 SL=1 SL=0 +# | | | +# For example, given the SRv6 policy (SID List := <X, Y, Z>): +# - a PSP enabled SRv6 End behavior bound to SID Y will apply the PSP operation +# as Segment Left (SL) is 1, corresponding to the Penultimate Segment of the +# SID List; +# - a PSP enabled SRv6 End behavior bound to SID X will *NOT* apply the PSP +# operation as the Segment Left is 2. This behavior instance will apply the +# "standard" End packet processing, ignoring the configured PSP flavor at +# all. +# +# [1] RFC8986: https://datatracker.ietf.org/doc/html/rfc8986 +# +# Network topology +# ================ +# +# The network topology used in this selftest is depicted hereafter, composed by +# two hosts (hs-1, hs-2) and four routers (rt-1, rt-2, rt-3, rt-4). +# Hosts hs-1 and hs-2 are connected to routers rt-1 and rt-2, respectively, +# allowing them to communicate with each other. +# Traffic exchanged between hs-1 and hs-2 can follow different network paths. +# The network operator, through specific SRv6 Policies can steer traffic to one +# path rather than another. In this selftest this is implemented as follows: +# +# i) The SRv6 H.Insert behavior applies SRv6 Policies on traffic received by +# connected hosts. It pushes the Segment Routing Header (SRH) after the +# IPv6 header. The SRH contains the SID List (i.e. SRv6 Policy) needed for +# steering traffic across the segments/waypoints specified in that list; +# +# ii) The SRv6 End behavior advances the active SID in the SID List carried by +# the SRH; +# +# iii) The PSP enabled SRv6 End behavior is used to remove the SRH when such +# behavior is configured on a node bound to the Penultimate Segment carried +# by the SID List. +# +# cafe::1 cafe::2 +# +--------+ +--------+ +# | | | | +# | hs-1 | | hs-2 | +# | | | | +# +---+----+ +--- +---+ +# cafe::/64 | | cafe::/64 +# | | +# +---+----+ +----+---+ +# | | fcf0:0:1:2::/64 | | +# | rt-1 +-------------------+ rt-2 | +# | | | | +# +---+----+ +----+---+ +# | . . | +# | fcf0:0:1:3::/64 . | +# | . . | +# | . . | +# fcf0:0:1:4::/64 | . | fcf0:0:2:3::/64 +# | . . | +# | . . | +# | fcf0:0:2:4::/64 . | +# | . . | +# +---+----+ +----+---+ +# | | | | +# | rt-4 +-------------------+ rt-3 | +# | | fcf0:0:3:4::/64 | | +# +---+----+ +----+---+ +# +# Every fcf0:0:x:y::/64 network interconnects the SRv6 routers rt-x with rt-y in +# the IPv6 operator network. +# +# +# Local SID table +# =============== +# +# Each SRv6 router is configured with a Local SID table in which SIDs are +# stored. Considering the given SRv6 router rt-x, at least two SIDs are +# configured in the Local SID table: +# +# Local SID table for SRv6 router rt-x +# +---------------------------------------------------------------------+ +# |fcff:x::e is associated with the SRv6 End behavior | +# |fcff:x::ef1 is associated with the SRv6 End behavior with PSP flavor | +# +---------------------------------------------------------------------+ +# +# The fcff::/16 prefix is reserved by the operator for the SIDs. Reachability of +# SIDs is ensured by proper configuration of the IPv6 operator's network and +# SRv6 routers. +# +# +# SRv6 Policies +# ============= +# +# An SRv6 ingress router applies different SRv6 Policies to the traffic received +# from connected hosts on the basis of the destination addresses. +# In case of SRv6 H.Insert behavior, the SRv6 Policy enforcement consists of +# pushing the SRH (carrying a given SID List) after the existing IPv6 header. +# Note that in the inserting mode, there is no encapsulation at all. +# +# Before applying an SRv6 Policy using the SRv6 H.Insert behavior +# +------+---------+ +# | IPv6 | Payload | +# +------+---------+ +# +# After applying an SRv6 Policy using the SRv6 H.Insert behavior +# +------+-----+---------+ +# | IPv6 | SRH | Payload | +# +------+-----+---------+ +# +# Traffic from hs-1 to hs-2 +# ------------------------- +# +# Packets generated from hs-1 and directed towards hs-2 are +# handled by rt-1 which applies the following SRv6 Policy: +# +# i.a) IPv6 traffic, SID List=fcff:3::e,fcff:4::ef1,fcff:2::ef1,cafe::2 +# +# Router rt-1 is configured to enforce the Policy (i.a) through the SRv6 +# H.Insert behavior which pushes the SRH after the existing IPv6 header. This +# Policy steers the traffic from hs-1 across rt-3, rt-4, rt-2 and finally to the +# destination hs-2. +# +# As the packet reaches the router rt-3, the SRv6 End behavior bound to SID +# fcff:3::e is triggered. The behavior updates the Segment Left (from SL=3 to +# SL=2) in the SRH, the IPv6 DA with fcff:4::ef1 and forwards the packet to the +# next router on the path, i.e. rt-4. +# +# When router rt-4 receives the packet, the PSP enabled SRv6 End behavior bound +# to SID fcff:4::ef1 is executed. Since the SL=2, the PSP operation is *NOT* +# kicked in and the behavior applies the default End processing: the Segment +# Left is decreased (from SL=2 to SL=1), the IPv6 DA is updated with the SID +# fcff:2::ef1 and the packet is forwarded to router rt-2. +# +# The PSP enabled SRv6 End behavior on rt-2 is associated with SID fcff:2::ef1 +# and is executed as the packet is received. Because SL=1, the behavior applies +# the PSP processing on the packet as follows: i) SL is decreased, i.e. from +# SL=1 to SL=0; ii) last SID (cafe::2) is copied into the IPv6 DA; iii) the +# outermost SRH is removed from the extension headers following the IPv6 header. +# Once the PSP processing is completed, the packet is forwarded to the host hs-2 +# (destination). +# +# Traffic from hs-2 to hs-1 +# ------------------------- +# +# Packets generated from hs-2 and directed to hs-1 are handled by rt-2 which +# applies the following SRv6 Policy: +# +# i.b) IPv6 traffic, SID List=fcff:1::ef1,cafe::1 +# +# Router rt-2 is configured to enforce the Policy (i.b) through the SRv6 +# H.Insert behavior which pushes the SRH after the existing IPv6 header. This +# Policy steers the traffic from hs-2 across rt-1 and finally to the +# destination hs-1 +# +# +# When the router rt-1 receives the packet, the PSP enabled SRv6 End behavior +# associated with the SID fcff:1::ef1 is triggered. Since the SL=1, +# the PSP operation takes place: i) the SL is decremented; ii) the IPv6 DA is +# set with the last SID; iii) the SRH is removed from the extension headers +# after the IPv6 header. At this point, the packet with IPv6 DA=cafe::1 is sent +# to the destination, i.e. hs-1. + +# Kselftest framework requirement - SKIP code is 4. +readonly ksft_skip=4 + +readonly RDMSUFF="$(mktemp -u XXXXXXXX)" +readonly DUMMY_DEVNAME="dum0" +readonly RT2HS_DEVNAME="veth1" +readonly LOCALSID_TABLE_ID=90 +readonly IPv6_RT_NETWORK=fcf0:0 +readonly IPv6_HS_NETWORK=cafe +readonly IPv6_TESTS_ADDR=2001:db8::1 +readonly LOCATOR_SERVICE=fcff +readonly END_FUNC=000e +readonly END_PSP_FUNC=0ef1 + +PING_TIMEOUT_SEC=4 +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} + +# IDs of routers and hosts are initialized during the setup of the testing +# network +ROUTERS='' +HOSTS='' + +SETUP_ERR=1 + +ret=${ksft_skip} +nsuccess=0 +nfail=0 + +log_test() +{ + local rc="$1" + local expected="$2" + local msg="$3" + + if [ "${rc}" -eq "${expected}" ]; then + nsuccess=$((nsuccess+1)) + printf "\n TEST: %-60s [ OK ]\n" "${msg}" + else + ret=1 + nfail=$((nfail+1)) + printf "\n TEST: %-60s [FAIL]\n" "${msg}" + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo + echo "hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + fi +} + +print_log_test_results() +{ + printf "\nTests passed: %3d\n" "${nsuccess}" + printf "Tests failed: %3d\n" "${nfail}" + + # when a test fails, the value of 'ret' is set to 1 (error code). + # Conversely, when all tests are passed successfully, the 'ret' value + # is set to 0 (success code). + if [ "${ret}" -ne 1 ]; then + ret=0 + fi +} + +log_section() +{ + echo + echo "################################################################################" + echo "TEST SECTION: $*" + echo "################################################################################" +} + +test_command_or_ksft_skip() +{ + local cmd="$1" + + if [ ! -x "$(command -v "${cmd}")" ]; then + echo "SKIP: Could not run test without \"${cmd}\" tool"; + exit "${ksft_skip}" + fi +} + +get_nodename() +{ + local name="$1" + + echo "${name}-${RDMSUFF}" +} + +get_rtname() +{ + local rtid="$1" + + get_nodename "rt-${rtid}" +} + +get_hsname() +{ + local hsid="$1" + + get_nodename "hs-${hsid}" +} + +__create_namespace() +{ + local name="$1" + + ip netns add "${name}" +} + +create_router() +{ + local rtid="$1" + local nsname + + nsname="$(get_rtname "${rtid}")" + + __create_namespace "${nsname}" +} + +create_host() +{ + local hsid="$1" + local nsname + + nsname="$(get_hsname "${hsid}")" + + __create_namespace "${nsname}" +} + +cleanup() +{ + local nsname + local i + + # destroy routers + for i in ${ROUTERS}; do + nsname="$(get_rtname "${i}")" + + ip netns del "${nsname}" &>/dev/null || true + done + + # destroy hosts + for i in ${HOSTS}; do + nsname="$(get_hsname "${i}")" + + ip netns del "${nsname}" &>/dev/null || true + done + + # check whether the setup phase was completed successfully or not. In + # case of an error during the setup phase of the testing environment, + # the selftest is considered as "skipped". + if [ "${SETUP_ERR}" -ne 0 ]; then + echo "SKIP: Setting up the testing environment failed" + exit "${ksft_skip}" + fi + + exit "${ret}" +} + +add_link_rt_pairs() +{ + local rt="$1" + local rt_neighs="$2" + local neigh + local nsname + local neigh_nsname + + nsname="$(get_rtname "${rt}")" + + for neigh in ${rt_neighs}; do + neigh_nsname="$(get_rtname "${neigh}")" + + ip link add "veth-rt-${rt}-${neigh}" netns "${nsname}" \ + type veth peer name "veth-rt-${neigh}-${rt}" \ + netns "${neigh_nsname}" + done +} + +get_network_prefix() +{ + local rt="$1" + local neigh="$2" + local p="${rt}" + local q="${neigh}" + + if [ "${p}" -gt "${q}" ]; then + p="${q}"; q="${rt}" + fi + + echo "${IPv6_RT_NETWORK}:${p}:${q}" +} + +# Given the description of a router <id:op> as an input, the function returns +# the <id> token which represents the ID of the router. +# i.e. input: "12:psp" +# output: "12" +__get_srv6_rtcfg_id() +{ + local element="$1" + + echo "${element}" | cut -d':' -f1 +} + +# Given the description of a router <id:op> as an input, the function returns +# the <op> token which represents the operation (e.g. End behavior with or +# withouth flavors) configured for the node. + +# Note that when the operation represents an End behavior with a list of +# flavors, the output is the ordered version of that list. +# i.e. input: "5:usp,psp,usd" +# output: "psp,usd,usp" +__get_srv6_rtcfg_op() +{ + local element="$1" + + # return the lexicographically ordered flavors + echo "${element}" | cut -d':' -f2 | sed 's/,/\n/g' | sort | \ + xargs | sed 's/ /,/g' +} + +# Setup the basic networking for the routers +setup_rt_networking() +{ + local rt="$1" + local rt_neighs="$2" + local nsname + local net_prefix + local devname + local neigh + + nsname="$(get_rtname "${rt}")" + + for neigh in ${rt_neighs}; do + devname="veth-rt-${rt}-${neigh}" + + net_prefix="$(get_network_prefix "${rt}" "${neigh}")" + + ip -netns "${nsname}" addr \ + add "${net_prefix}::${rt}/64" dev "${devname}" nodad + + ip -netns "${nsname}" link set "${devname}" up + done + + ip -netns "${nsname}" link set lo up + + ip -netns "${nsname}" link add ${DUMMY_DEVNAME} type dummy + ip -netns "${nsname}" link set ${DUMMY_DEVNAME} up + + ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0 + ip netns exec "${nsname}" sysctl -wq net.ipv6.conf.all.forwarding=1 +} + +# Setup local SIDs for an SRv6 router +setup_rt_local_sids() +{ + local rt="$1" + local rt_neighs="$2" + local net_prefix + local devname + local nsname + local neigh + + nsname="$(get_rtname "${rt}")" + + for neigh in ${rt_neighs}; do + devname="veth-rt-${rt}-${neigh}" + + net_prefix="$(get_network_prefix "${rt}" "${neigh}")" + + # set underlay network routes for SIDs reachability + ip -netns "${nsname}" -6 route \ + add "${LOCATOR_SERVICE}:${neigh}::/32" \ + table "${LOCALSID_TABLE_ID}" \ + via "${net_prefix}::${neigh}" dev "${devname}" + done + + # Local End behavior (note that "dev" is a dummy interface chosen for + # the sake of simplicity). + ip -netns "${nsname}" -6 route \ + add "${LOCATOR_SERVICE}:${rt}::${END_FUNC}" \ + table "${LOCALSID_TABLE_ID}" \ + encap seg6local action End dev "${DUMMY_DEVNAME}" + + + # all SIDs start with a common locator. Routes and SRv6 Endpoint + # behavior instaces are grouped together in the 'localsid' table. + ip -netns "${nsname}" -6 rule \ + add to "${LOCATOR_SERVICE}::/16" \ + lookup "${LOCALSID_TABLE_ID}" prio 999 + + # set default routes to unreachable + ip -netns "${nsname}" -6 route \ + add unreachable default metric 4278198272 \ + dev "${DUMMY_DEVNAME}" +} + +# This helper function builds and installs the SID List (i.e. SRv6 Policy) +# to be applied on incoming packets at the ingress node. Moreover, it +# configures the SRv6 nodes specified in the SID List to process the traffic +# according to the operations required by the Policy itself. +# args: +# $1 - destination host (i.e. cafe::x host) +# $2 - SRv6 router configured for enforcing the SRv6 Policy +# $3 - compact way to represent a list of SRv6 routers with their operations +# (i.e. behaviors) that each of them needs to perform. Every <nodeid:op> +# element constructs a SID that is associated with the behavior <op> on +# the <nodeid> node. The list of such elements forms an SRv6 Policy. +__setup_rt_policy() +{ + local dst="$1" + local encap_rt="$2" + local policy_rts="$3" + local behavior_cfg + local in_nsname + local rt_nsname + local policy='' + local function + local fullsid + local op_type + local node + local n + + in_nsname="$(get_rtname "${encap_rt}")" + + for n in ${policy_rts}; do + node="$(__get_srv6_rtcfg_id "${n}")" + op_type="$(__get_srv6_rtcfg_op "${n}")" + rt_nsname="$(get_rtname "${node}")" + + case "${op_type}" in + "noflv") + policy="${policy}${LOCATOR_SERVICE}:${node}::${END_FUNC}," + function="${END_FUNC}" + behavior_cfg="End" + ;; + + "psp") + policy="${policy}${LOCATOR_SERVICE}:${node}::${END_PSP_FUNC}," + function="${END_PSP_FUNC}" + behavior_cfg="End flavors psp" + ;; + + *) + break + ;; + esac + + fullsid="${LOCATOR_SERVICE}:${node}::${function}" + + # add SRv6 Endpoint behavior to the selected router + if ! ip -netns "${rt_nsname}" -6 route get "${fullsid}" \ + &>/dev/null; then + ip -netns "${rt_nsname}" -6 route \ + add "${fullsid}" \ + table "${LOCALSID_TABLE_ID}" \ + encap seg6local action ${behavior_cfg} \ + dev "${DUMMY_DEVNAME}" + fi + done + + # we need to remove the trailing comma to avoid inserting an empty + # address (::0) in the SID List. + policy="${policy%,}" + + # add SRv6 policy to incoming traffic sent by connected hosts + ip -netns "${in_nsname}" -6 route \ + add "${IPv6_HS_NETWORK}::${dst}" \ + encap seg6 mode inline segs "${policy}" \ + dev "${DUMMY_DEVNAME}" + + ip -netns "${in_nsname}" -6 neigh \ + add proxy "${IPv6_HS_NETWORK}::${dst}" \ + dev "${RT2HS_DEVNAME}" +} + +# see __setup_rt_policy +setup_rt_policy_ipv6() +{ + __setup_rt_policy "$1" "$2" "$3" +} + +setup_hs() +{ + local hs="$1" + local rt="$2" + local hsname + local rtname + + hsname="$(get_hsname "${hs}")" + rtname="$(get_rtname "${rt}")" + + ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec "${hsname}" sysctl -wq net.ipv6.conf.default.accept_dad=0 + + ip -netns "${hsname}" link add veth0 type veth \ + peer name "${RT2HS_DEVNAME}" netns "${rtname}" + + ip -netns "${hsname}" addr \ + add "${IPv6_HS_NETWORK}::${hs}/64" dev veth0 nodad + + ip -netns "${hsname}" link set veth0 up + ip -netns "${hsname}" link set lo up + + ip -netns "${rtname}" addr \ + add "${IPv6_HS_NETWORK}::254/64" dev "${RT2HS_DEVNAME}" nodad + + ip -netns "${rtname}" link set "${RT2HS_DEVNAME}" up + + ip netns exec "${rtname}" \ + sysctl -wq net.ipv6.conf."${RT2HS_DEVNAME}".proxy_ndp=1 +} + +setup() +{ + local i + + # create routers + ROUTERS="1 2 3 4"; readonly ROUTERS + for i in ${ROUTERS}; do + create_router "${i}" + done + + # create hosts + HOSTS="1 2"; readonly HOSTS + for i in ${HOSTS}; do + create_host "${i}" + done + + # set up the links for connecting routers + add_link_rt_pairs 1 "2 3 4" + add_link_rt_pairs 2 "3 4" + add_link_rt_pairs 3 "4" + + # set up the basic connectivity of routers and routes required for + # reachability of SIDs. + setup_rt_networking 1 "2 3 4" + setup_rt_networking 2 "1 3 4" + setup_rt_networking 3 "1 2 4" + setup_rt_networking 4 "1 2 3" + + # set up the hosts connected to routers + setup_hs 1 1 + setup_hs 2 2 + + # set up default SRv6 Endpoints (i.e. SRv6 End behavior) + setup_rt_local_sids 1 "2 3 4" + setup_rt_local_sids 2 "1 3 4" + setup_rt_local_sids 3 "1 2 4" + setup_rt_local_sids 4 "1 2 3" + + # set up SRv6 policies + # create a connection between hosts hs-1 and hs-2. + # The path between hs-1 and hs-2 traverses SRv6 aware routers. + # For each direction two path are chosen: + # + # Direction hs-1 -> hs-2 (PSP flavor) + # - rt-1 (SRv6 H.Insert policy) + # - rt-3 (SRv6 End behavior) + # - rt-4 (SRv6 End flavor PSP with SL>1, acting as End behavior) + # - rt-2 (SRv6 End flavor PSP with SL=1) + # + # Direction hs-2 -> hs-1 (PSP flavor) + # - rt-2 (SRv6 H.Insert policy) + # - rt-1 (SRv6 End flavor PSP with SL=1) + setup_rt_policy_ipv6 2 1 "3:noflv 4:psp 2:psp" + setup_rt_policy_ipv6 1 2 "1:psp" + + # testing environment was set up successfully + SETUP_ERR=0 +} + +check_rt_connectivity() +{ + local rtsrc="$1" + local rtdst="$2" + local prefix + local rtsrc_nsname + + rtsrc_nsname="$(get_rtname "${rtsrc}")" + + prefix="$(get_network_prefix "${rtsrc}" "${rtdst}")" + + ip netns exec "${rtsrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \ + "${prefix}::${rtdst}" >/dev/null 2>&1 +} + +check_and_log_rt_connectivity() +{ + local rtsrc="$1" + local rtdst="$2" + + check_rt_connectivity "${rtsrc}" "${rtdst}" + log_test $? 0 "Routers connectivity: rt-${rtsrc} -> rt-${rtdst}" +} + +check_hs_ipv6_connectivity() +{ + local hssrc="$1" + local hsdst="$2" + local hssrc_nsname + + hssrc_nsname="$(get_hsname "${hssrc}")" + + ip netns exec "${hssrc_nsname}" ping -c 1 -W "${PING_TIMEOUT_SEC}" \ + "${IPv6_HS_NETWORK}::${hsdst}" >/dev/null 2>&1 +} + +check_and_log_hs2gw_connectivity() +{ + local hssrc="$1" + + check_hs_ipv6_connectivity "${hssrc}" 254 + log_test $? 0 "IPv6 Hosts connectivity: hs-${hssrc} -> gw" +} + +check_and_log_hs_ipv6_connectivity() +{ + local hssrc="$1" + local hsdst="$2" + + check_hs_ipv6_connectivity "${hssrc}" "${hsdst}" + log_test $? 0 "IPv6 Hosts connectivity: hs-${hssrc} -> hs-${hsdst}" +} + +check_and_log_hs_connectivity() +{ + local hssrc="$1" + local hsdst="$2" + + check_and_log_hs_ipv6_connectivity "${hssrc}" "${hsdst}" +} + +router_tests() +{ + local i + local j + + log_section "IPv6 routers connectivity test" + + for i in ${ROUTERS}; do + for j in ${ROUTERS}; do + if [ "${i}" -eq "${j}" ]; then + continue + fi + + check_and_log_rt_connectivity "${i}" "${j}" + done + done +} + +host2gateway_tests() +{ + local hs + + log_section "IPv6 connectivity test among hosts and gateways" + + for hs in ${HOSTS}; do + check_and_log_hs2gw_connectivity "${hs}" + done +} + +host_srv6_end_flv_psp_tests() +{ + log_section "SRv6 connectivity test hosts (h1 <-> h2, PSP flavor)" + + check_and_log_hs_connectivity 1 2 + check_and_log_hs_connectivity 2 1 +} + +test_iproute2_supp_or_ksft_skip() +{ + local flavor="$1" + + if ! ip route help 2>&1 | grep -qo "${flavor}"; then + echo "SKIP: Missing SRv6 ${flavor} flavor support in iproute2" + exit "${ksft_skip}" + fi +} + +test_kernel_supp_or_ksft_skip() +{ + local flavor="$1" + local test_netns + + test_netns="kflv-$(mktemp -u XXXXXXXX)" + + if ! ip netns add "${test_netns}"; then + echo "SKIP: Cannot set up netns to test kernel support for flavors" + exit "${ksft_skip}" + fi + + if ! ip -netns "${test_netns}" link \ + add "${DUMMY_DEVNAME}" type dummy; then + echo "SKIP: Cannot set up dummy dev to test kernel support for flavors" + + ip netns del "${test_netns}" + exit "${ksft_skip}" + fi + + if ! ip -netns "${test_netns}" link \ + set "${DUMMY_DEVNAME}" up; then + echo "SKIP: Cannot activate dummy dev to test kernel support for flavors" + + ip netns del "${test_netns}" + exit "${ksft_skip}" + fi + + if ! ip -netns "${test_netns}" -6 route \ + add "${IPv6_TESTS_ADDR}" encap seg6local \ + action End flavors "${flavor}" dev "${DUMMY_DEVNAME}"; then + echo "SKIP: ${flavor} flavor not supported in kernel" + + ip netns del "${test_netns}" + exit "${ksft_skip}" + fi + + ip netns del "${test_netns}" +} + +test_dummy_dev_or_ksft_skip() +{ + local test_netns + + test_netns="dummy-$(mktemp -u XXXXXXXX)" + + if ! ip netns add "${test_netns}"; then + echo "SKIP: Cannot set up netns for testing dummy dev support" + exit "${ksft_skip}" + fi + + modprobe dummy &>/dev/null || true + if ! ip -netns "${test_netns}" link \ + add "${DUMMY_DEVNAME}" type dummy; then + echo "SKIP: dummy dev not supported" + + ip netns del "${test_netns}" + exit "${ksft_skip}" + fi + + ip netns del "${test_netns}" +} + +if [ "$(id -u)" -ne 0 ]; then + echo "SKIP: Need root privileges" + exit "${ksft_skip}" +fi + +# required programs to carry out this selftest +test_command_or_ksft_skip ip +test_command_or_ksft_skip ping +test_command_or_ksft_skip sysctl +test_command_or_ksft_skip grep +test_command_or_ksft_skip cut +test_command_or_ksft_skip sed +test_command_or_ksft_skip sort +test_command_or_ksft_skip xargs + +test_dummy_dev_or_ksft_skip +test_iproute2_supp_or_ksft_skip psp +test_kernel_supp_or_ksft_skip psp + +set -e +trap cleanup EXIT + +setup +set +e + +router_tests +host2gateway_tests +host_srv6_end_flv_psp_tests + +print_log_test_results |