| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 59cbf56fcd98ba2a715b6e97c4e43f773f956393 ]
Same reasons than the ones explained in commit 4179cb5a4c92
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")
netif_rx() or gro_cells_receive() must be called under a strict contract.
At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.
A similar protocol is used for gro_cells infrastructure, as
gro_cells_destroy() will be called only after a full rcu
grace period is observed after IFF_UP has been cleared.
Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP
Virtual drivers do not have this guarantee, and must
therefore make the check themselves.
Otherwise we risk use-after-free and/or crashes.
Fixes: d342894c5d2f ("vxlan: virtual extensible lan")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ae3b564179bfd06f32d051b9e5d72ce4b2a07c37 ]
Several u->addr and u->path users are not holding any locks in
common with unix_bind(). unix_state_lock() is useless for those
purposes.
u->addr is assign-once and *(u->addr) is fully set up by the time
we set u->addr (all under unix_table_lock). u->path is also
set in the same critical area, also before setting u->addr, and
any unix_sock with ->path filled will have non-NULL ->addr.
So setting ->addr with smp_store_release() is all we need for those
"lockless" users - just have them fetch ->addr with smp_load_acquire()
and don't even bother looking at ->path if they see NULL ->addr.
Users of ->addr and ->path fall into several classes now:
1) ones that do smp_load_acquire(u->addr) and access *(u->addr)
and u->path only if smp_load_acquire() has returned non-NULL.
2) places holding unix_table_lock. These are guaranteed that
*(u->addr) is seen fully initialized. If unix_sock is in one of the
"bound" chains, so's ->path.
3) unix_sock_destructor() using ->addr is safe. All places
that set u->addr are guaranteed to have seen all stores *(u->addr)
while holding a reference to u and unix_sock_destructor() is called
when (atomic) refcount hits zero.
4) unix_release_sock() using ->path is safe. unix_bind()
is serialized wrt unix_release() (normally - by struct file
refcount), and for the instances that had ->path set by unix_bind()
unix_release_sock() comes from unix_release(), so they are fine.
Instances that had it set in unix_stream_connect() either end up
attached to a socket (in unix_accept()), in which case the call
chain to unix_release_sock() and serialization are the same as in
the previous case, or they never get accept'ed and unix_release_sock()
is called when the listener is shut down and its queue gets purged.
In that case the listener's queue lock provides the barriers needed -
unix_stream_connect() shoves our unix_sock into listener's queue
under that lock right after having set ->path and eventual
unix_release_sock() caller picks them from that queue under the
same lock right before calling unix_release_sock().
5) unix_find_other() use of ->path is pointless, but safe -
it happens with successful lookup by (abstract) name, so ->path.dentry
is guaranteed to be NULL there.
earlier-variant-reviewed-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 97f0082a0592212fc15d4680f5a4d80f79a1687c ]
Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255 to
keep legacy software happy. This is similar to what was done for
ipv4 in commit 709772e6e065 ("net: Fix routing tables with
id > 255 for legacy software").
Signed-off-by: Kalash Nainwal <kalash@arista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6ff7b060535e87c2ae14dd8548512abfdda528fb ]
KASAN has found use-after-free in fixed_mdio_bus_init,
commit 0c692d07842a ("drivers/net/phy/mdio_bus.c: call
put_device on device_register() failure") call put_device()
while device_register() fails,give up the last reference
to the device and allow mdiobus_release to be executed
,kfreeing the bus. However in most drives, mdiobus_free
be called to free the bus while mdiobus_register fails.
use-after-free occurs when access bus again, this patch
revert it to let mdiobus_free free the bus.
KASAN report details as below:
BUG: KASAN: use-after-free in mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
Read of size 4 at addr ffff8881dc824d78 by task syz-executor.0/3524
CPU: 1 PID: 3524 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x65/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
mdiobus_free+0x85/0x90 drivers/net/phy/mdio_bus.c:482
fixed_mdio_bus_init+0x283/0x1000 [fixed_phy]
? 0xffffffffc0e40000
? 0xffffffffc0e40000
? 0xffffffffc0e40000
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6215c19c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000003
RBP: 00007f6215c19c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6215c1a6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
Allocated by task 3524:
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:496
kmalloc include/linux/slab.h:545 [inline]
kzalloc include/linux/slab.h:740 [inline]
mdiobus_alloc_size+0x54/0x1b0 drivers/net/phy/mdio_bus.c:143
fixed_mdio_bus_init+0x163/0x1000 [fixed_phy]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 3524:
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x130/0x180 mm/kasan/common.c:458
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook mm/slub.c:1436 [inline]
slab_free mm/slub.c:2986 [inline]
kfree+0xe1/0x270 mm/slub.c:3938
device_release+0x78/0x200 drivers/base/core.c:919
kobject_cleanup lib/kobject.c:662 [inline]
kobject_release lib/kobject.c:691 [inline]
kref_put include/linux/kref.h:67 [inline]
kobject_put+0x146/0x240 lib/kobject.c:708
put_device+0x1c/0x30 drivers/base/core.c:2060
__mdiobus_register+0x483/0x560 drivers/net/phy/mdio_bus.c:382
fixed_mdio_bus_init+0x26b/0x1000 [fixed_phy]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8881dc824c80
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 248 bytes inside of
2048-byte region [ffff8881dc824c80, ffff8881dc825480)
The buggy address belongs to the page:
page:ffffea0007720800 count:1 mapcount:0 mapping:ffff8881f6c02800 index:0x0 compound_mapcount: 0
flags: 0x2fffc0000010200(slab|head)
raw: 02fffc0000010200 0000000000000000 0000000500000001 ffff8881f6c02800
raw: 0000000000000000 00000000800f000f 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881dc824c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881dc824c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881dc824d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881dc824d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881dc824e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
Fixes: 0c692d07842a ("drivers/net/phy/mdio_bus.c: call put_device on device_register() failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 797a22bd5298c2674d927893f46cadf619dad11d ]
syzbot was able to trigger another soft lockup [1]
I first thought it was the O(N^2) issue I mentioned in my
prior fix (f657d22ee1f "net/x25: do not hold the cpu
too long in x25_new_lci()"), but I eventually found
that x25_bind() was not checking SOCK_ZAPPED state under
socket lock protection.
This means that multiple threads can end up calling
x25_insert_socket() for the same socket, and corrupt x25_list
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492]
Modules linked in:
irq event stamp: 27515
hardirqs last enabled at (27514): [<ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (27515): [<ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (32): [<ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336
softirqs last disabled at (34): [<ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341
CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97
Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2
RSP: 0018:ffff88806e94fc48 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13
RAX: 1ffff1100d84dac5 RBX: 0000000000000001 RCX: ffffc90006197000
RDX: 0000000000040000 RSI: ffffffff86324bf3 RDI: ffff88806c26d628
RBP: ffff88806e94fc48 R08: ffff88806c1c6500 R09: fffffbfff1282561
R10: fffffbfff1282560 R11: ffffffff89412b03 R12: ffff88806c26d628
R13: ffff888090455200 R14: dffffc0000000000 R15: 0000000000000000
FS: 00007f3a107e4700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3a107e3db8 CR3: 00000000a5544000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__x25_find_socket net/x25/af_x25.c:327 [inline]
x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342
x25_new_lci net/x25/af_x25.c:355 [inline]
x25_connect+0x380/0xde0 net/x25/af_x25.c:784
__sys_connect+0x266/0x330 net/socket.c:1662
__do_sys_connect net/socket.c:1673 [inline]
__se_sys_connect net/socket.c:1670 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1670
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f3a107e3c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457e29
RDX: 0000000000000012 RSI: 0000000020000200 RDI: 0000000000000005
RBP: 000000000073c040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3a107e46d4
R13: 00000000004be362 R14: 00000000004ceb98 R15: 00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86
Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00
RSP: 0018:ffff888085c47bd8 EFLAGS: 00000206
RAX: 0000000000000300 RBX: ffffffff89412b00 RCX: 1ffffffff1282560
RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff89412b00
RBP: ffff888085c47c70 R08: 1ffffffff1282560 R09: fffffbfff1282561
R10: fffffbfff1282560 R11: ffffffff89412b03 R12: 00000000000000ff
R13: fffffbfff1282560 R14: 1ffff11010b88f7d R15: 0000000000000003
FS: 00007fdd04086700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdd04064db8 CR3: 0000000090be0000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
__raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
_raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
x25_bind+0x273/0x340 net/x25/af_x25.c:703
__sys_bind+0x23f/0x290 net/socket.c:1481
__do_sys_bind net/socket.c:1492 [inline]
__se_sys_bind net/socket.c:1490 [inline]
__x64_sys_bind+0x73/0xb0 net/socket.c:1490
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Fixes: 90c27297a9bf ("X.25 remove bkl in bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8511a653e9250ef36b95803c375a7be0e2edb628 ]
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper)
ultimately depends on function roundup_pow_of_two.
If the amount of memory required by the QP is less than one page,
roundup_pow_of_two is called with argument zero. In this case, the
roundup_pow_of_two result is undefined.
Calling roundup_pow_of_two with a zero argument resulted in the
following stack trace:
UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13
shift exponent 64 is too large for 64-bit type 'long unsigned int'
CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1
Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015
Call Trace:
dump_stack+0x9a/0xeb
ubsan_epilogue+0x9/0x7c
__ubsan_handle_shift_out_of_bounds+0x254/0x29d
? __ubsan_handle_load_invalid_value+0x180/0x180
? debug_show_all_locks+0x310/0x310
? sched_clock+0x5/0x10
? sched_clock+0x5/0x10
? sched_clock_cpu+0x18/0x260
? find_held_lock+0x35/0x1e0
? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core]
Fix this by explicitly testing for zero, and returning one if the
argument is zero (assuming that the next higher power of 2 in this case
should be one).
Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9417d81f4f8adfe20a12dd1fadf73a618cbd945d ]
sk_setup_caps() is called to set sk->sk_dst_cache in pptp_connect,
so we have to dst_release(sk->sk_dst_cache) in pptp_sock_destruct,
otherwise, the dst refcnt will leak.
It can be reproduced by this syz log:
r1 = socket$pptp(0x18, 0x1, 0x2)
bind$pptp(r1, &(0x7f0000000100)={0x18, 0x2, {0x0, @local}}, 0x1e)
connect$pptp(r1, &(0x7f0000000000)={0x18, 0x2, {0x3, @remote}}, 0x1e)
Consecutive dmesg warnings will occur:
unregister_netdevice: waiting for lo to become free. Usage count = 1
v1->v2:
- use rcu_dereference_protected() instead of rcu_dereference_check(),
as suggested by Eric.
Fixes: 00959ade36ac ("PPTP: PPP over IPv4 (Point-to-Point Tunneling Protocol)")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee74d0bd4325efb41e38affe5955f920ed973f23 ]
In case x25_connect() fails and frees the socket neighbour,
we also need to undo the change done to x25->state.
Before my last bug fix, we had use-after-free so this
patch fixes a latent bug.
syzbot report :
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173
Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f
RSP: 0018:ffff888076717a08 EFLAGS: 00010207
RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000
kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env
RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c
RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d
R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840
kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5'
R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013
FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
x25_release+0xd0/0x340 net/x25/af_x25.c:658
__sock_release+0xd3/0x2b0 net/socket.c:579
sock_close+0x1b/0x30 net/socket.c:1162
__fput+0x2df/0x8d0 fs/file_table.c:278
____fput+0x16/0x20 fs/file_table.c:309
task_work_run+0x14a/0x1c0 kernel/task_work.c:113
get_signal+0x1961/0x1d50 kernel/signal.c:2388
do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816
exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162
prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline]
syscall_return_slowpath arch/x86/entry/common.c:268 [inline]
do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457f29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29
RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4
R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff
Modules linked in:
Fixes: 95d6ebd53c79 ("net/x25: fix use-after-free in x25_device_event()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: andrew hendry <andrew.hendry@gmail.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 95d6ebd53c79522bf9502dbc7e89e0d63f94dae4 ]
In case of failure x25_connect() does a x25_neigh_put(x25->neighbour)
but forgets to clear x25->neighbour pointer, thus triggering use-after-free.
Since the socket is visible in x25_list, we need to hold x25_list_lock
to protect the operation.
syzbot report :
BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline]
BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854
CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
__asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135
x25_kill_by_device net/x25/af_x25.c:217 [inline]
x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4467c9
Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9
RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003
RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000
R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c
R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669
Allocated by task 7843:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_kmalloc mm/kasan/common.c:495 [inline]
__kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468
kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509
kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615
kmalloc include/linux/slab.h:545 [inline]
x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249
x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242
notifier_call_chain+0xc7/0x240 kernel/notifier.c:93
__raw_notifier_call_chain kernel/notifier.c:394 [inline]
raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401
call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739
call_netdevice_notifiers_extack net/core/dev.c:1751 [inline]
call_netdevice_notifiers net/core/dev.c:1765 [inline]
__dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605
dev_change_flags+0x10d/0x170 net/core/dev.c:7643
dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237
dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488
sock_do_ioctl+0x1bd/0x300 net/socket.c:995
sock_ioctl+0x32b/0x610 net/socket.c:1096
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:509 [inline]
do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696
ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 7865:
save_stack+0x45/0xd0 mm/kasan/common.c:73
set_track mm/kasan/common.c:85 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/common.c:457
kasan_slab_free+0xe/0x10 mm/kasan/common.c:465
__cache_free mm/slab.c:3494 [inline]
kfree+0xcf/0x230 mm/slab.c:3811
x25_neigh_put include/net/x25.h:253 [inline]
x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824
__sys_connect+0x266/0x330 net/socket.c:1685
__do_sys_connect net/socket.c:1696 [inline]
__se_sys_connect net/socket.c:1693 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1693
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
The buggy address belongs to the object at ffff8880a030edc0
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 16 bytes inside of
256-byte region [ffff8880a030edc0, ffff8880a030eec0)
The buggy address belongs to the page:
page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0
flags: 0x1fffc0000000200(slab)
raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0
raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000
page dumped because: kasan: bad access detected
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a843dc4ebaecd15fca1f4d35a97210f72ea1473b ]
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to
32,so UBSAN complain about it.
UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1
04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xca/0x13e lib/dump_stack.c:113
ubsan_epilogue+0xe/0x81 lib/ubsan.c:159
__ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425
check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781
try_6rd net/ipv6/sit.c:806 [inline]
ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline]
sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033
__netdev_start_xmit include/linux/netdevice.h:4300 [inline]
netdev_start_xmit include/linux/netdevice.h:4309 [inline]
xmit_one net/core/dev.c:3243 [inline]
dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259
__dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829
neigh_output include/net/neighbour.h:501 [inline]
ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120
ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176
ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697
ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717
rawv6_push_pending_frames net/ipv6/raw.c:616 [inline]
rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946
inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xc8/0x110 net/socket.c:631
___sys_sendmsg+0x6cf/0x890 net/socket.c:2114
__sys_sendmsg+0xf0/0x1b0 net/socket.c:2152
do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: linmiaohe <linmiaohe@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6caabe7f197d3466d238f70915d65301f1716626 ]
If hsr_add_port(hsr, hsr_dev, HSR_PT_MASTER) failed to
add port, it directly returns res and forgets to free the node
that allocated in hsr_create_self_node(), and forgets to delete
the node->mac_list linked in hsr->self_node_db.
BUG: memory leak
unreferenced object 0xffff8881cfa0c780 (size 64):
comm "syz-executor.0", pid 2077, jiffies 4294717969 (age 2415.377s)
hex dump (first 32 bytes):
e0 c7 a0 cf 81 88 ff ff 00 02 00 00 00 00 ad de ................
00 e6 49 cd 81 88 ff ff c0 9b 87 d0 81 88 ff ff ..I.............
backtrace:
[<00000000e2ff5070>] hsr_dev_finalize+0x736/0x960 [hsr]
[<000000003ed2e597>] hsr_newlink+0x2b2/0x3e0 [hsr]
[<000000003fa8c6b6>] __rtnl_newlink+0xf1f/0x1600 net/core/rtnetlink.c:3182
[<000000001247a7ad>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3240
[<00000000e7d1b61d>] rtnetlink_rcv_msg+0x54e/0xb90 net/core/rtnetlink.c:5130
[<000000005556bd3a>] netlink_rcv_skb+0x129/0x340 net/netlink/af_netlink.c:2477
[<00000000741d5ee6>] netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
[<00000000741d5ee6>] netlink_unicast+0x49a/0x650 net/netlink/af_netlink.c:1336
[<000000009d56f9b7>] netlink_sendmsg+0x88b/0xdf0 net/netlink/af_netlink.c:1917
[<0000000046b35c59>] sock_sendmsg_nosec net/socket.c:621 [inline]
[<0000000046b35c59>] sock_sendmsg+0xc3/0x100 net/socket.c:631
[<00000000d208adc9>] __sys_sendto+0x33e/0x560 net/socket.c:1786
[<00000000b582837a>] __do_sys_sendto net/socket.c:1798 [inline]
[<00000000b582837a>] __se_sys_sendto net/socket.c:1794 [inline]
[<00000000b582837a>] __x64_sys_sendto+0xdd/0x1b0 net/socket.c:1794
[<00000000c866801d>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
[<00000000fea382d9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e01dacb3>] 0xffffffffffffffff
Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 163d1c3d6f17556ed3c340d3789ea93be95d6c28 ]
Back in 2013 Hannes took care of most of such leaks in commit
bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls")
But the bug in l2tp_ip6_recvmsg() has not been fixed.
syzbot report :
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 10996 Comm: syz-executor362 Not tainted 5.0.0+ #11
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
kmsan_internal_check_memory+0x9f4/0xb10 mm/kmsan/kmsan.c:694
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:174 [inline]
move_addr_to_user+0x311/0x570 net/socket.c:227
___sys_recvmsg+0xb65/0x1310 net/socket.c:2283
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
__sys_recvmmsg net/socket.c:2469 [inline]
__do_sys_recvmmsg net/socket.c:2492 [inline]
__se_sys_recvmmsg+0x1d1/0x350 net/socket.c:2485
__x64_sys_recvmmsg+0x62/0x80 net/socket.c:2485
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x445819
Code: e8 6c b6 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b 12 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f64453eddb8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dac28 RCX: 0000000000445819
RDX: 0000000000000005 RSI: 0000000020002f80 RDI: 0000000000000003
RBP: 00000000006dac20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dac2c
R13: 00007ffeba8f87af R14: 00007f64453ee9c0 R15: 20c49ba5e353f7cf
Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xf6/0x1310 net/socket.c:2244
do_recvmmsg+0x646/0x10c0 net/socket.c:2390
Bytes 0-31 of 32 are uninitialized
Memory access of size 32 starts at ffff8880ae62fbb0
Data copied to user address 0000000020000000
Fixes: a32e0eec7042 ("l2tp: introduce L2TPv3 IP encapsulation support for IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df997abeebadaa4824271009e2d2b526a70a11cb upstream.
Add missing break statement in order to prevent the code from falling
through to case ISCSI_BOOT_TGT_NAME, which is unnecessary.
This bug was found thanks to the ongoing efforts to enable
-Wimplicit-fallthrough.
Fixes: b33a84a38477 ("ibft: convert iscsi_ibft module to iscsi boot lib")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 44fc95e218a09d7966a9d448941fdb003f6bb69f upstream.
Tablet initially begins communicating at 9600 baud, so this command
should be used to connect to the device:
$ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0
https://github.com/linuxwacom/xf86-input-wacom/issues/40
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 59a17706915fe5ea6f711e1f92d4fb706bce07fe ]
When perf is built with the annobin plugin (RHEL8 build) extra symbols
are added to its binary:
# nm perf | grep annobin | head -10
0000000000241100 t .annobin_annotate.c
0000000000326490 t .annobin_annotate.c
0000000000249255 t .annobin_annotate.c_end
00000000003283a8 t .annobin_annotate.c_end
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bce18 t .annobin_annotate.c_end.hot
00000000001bc3e2 t .annobin_annotate.c_end.unlikely
00000000001bc400 t .annobin_annotate.c_end.unlikely
00000000001bce18 t .annobin_annotate.c.hot
00000000001bce18 t .annobin_annotate.c.hot
...
Those symbols have no use for report or annotation and should be
skipped. Moreover they interfere with the DWARF unwind test on the PPC
arch, where they are mixed with checked symbols and then the test fails:
# perf test dwarf -v
59: Test dwarf unwind :
--- start ---
test child forked, pid 8515
unwind: .annobin_dwarf_unwind.c:ip = 0x10dba40dc (0x2740dc)
...
got: .annobin_dwarf_unwind.c 0x10dba40dc, expecting test__arch_unwind_sample
unwind: failed with 'no error'
The annobin symbols are defined as NOTYPE/LOCAL/HIDDEN:
# readelf -s ./perf | grep annobin | head -1
40: 00000000001bce4f 0 NOTYPE LOCAL HIDDEN 13 .annobin_init.c
They can still pass the check for the label symbol. Adding check for
HIDDEN and INTERNAL (as suggested by Nick below) visibility and filter
out such symbols.
> Just to be awkward, if you are going to ignore STV_HIDDEN
> symbols then you should probably also ignore STV_INTERNAL ones
> as well... Annobin does not generate them, but you never know,
> one day some other tool might create some.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nick Clifton <nickc@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190128133526.GD15461@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ]
The error path in qeth_alloc_qdio_buffers() that takes care of
cleaning up the Output Queues is buggy. It first frees the queue, but
then calls qeth_clear_outq_buffers() with that very queue struct.
Make the call to qeth_clear_outq_buffers() part of the free action
(in the correct order), and while at it fix the naming of the helper.
Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6454368a804c4955ccd116236037536f81e5b1f1 ]
In case of mapping error the DMA addresses are invalid and continuing
will screw system memory or potentially something else.
[ 222.480310] dmatest: dma0chan7-copy0: summary 1 tests, 3 failures 6 iops 349 KB/s (0)
...
[ 240.912725] check: Corrupted low memory at 00000000c7c75ac9 (2940 phys) = 5656000000000000
[ 240.921998] check: Corrupted low memory at 000000005715a1cd (2948 phys) = 279f2aca5595ab2b
[ 240.931280] check: Corrupted low memory at 000000002f4024c0 (2950 phys) = 5e5624f349e793cf
...
Abort any test if mapping failed.
Fixes: 4076e755dbec ("dmatest: convert to dmaengine_unmap_data")
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2380a22b60ce6f995eac806e69c66e397b59d045 ]
Resetting bit 4 disables the interrupt delivery to the "secure
processor" core. This breaks the keyboard on a OLPC XO 1.75 laptop,
where the firmware running on the "secure processor" bit-bangs the
PS/2 protocol over the GPIO lines.
It is not clear what the rest of the bits are and Marvell was unhelpful
when asked for documentation. Aside from the SP bit, there are probably
priority bits.
Leaving the unknown bits as the firmware set them up seems to be a wiser
course of action compared to just turning them off.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
[maz: fixed-up subject and commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba16adeb346387eb2d1ada69003588be96f098fa ]
devm_ allocated data will be automatically freed. The free
of devm_ allocated data is invalid.
Fixes: 1c459de1e645 ("ARM: pxa: ssp: use devm_ functions")
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[title's prefix changed]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f585b283e3f025754c45bbe7533fc6e5c4643700 ]
In autofs_fill_super() on error of get inode/make root dentry the return
should be ENOMEM as this is the only failure case of the called
functions.
Link: http://lkml.kernel.org/r/154725123240.11260.796773942606871359.stgit@pluto-themaw-net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 63ce5f552beb9bdb41546b3a26c4374758b21815 ]
autofs_expire_run() calls dput(dentry) to drop the reference count of
dentry. However, dentry is read via autofs_dentry_ino(dentry) after
that. This may result in a use-free-bug. The patch drops the reference
count of dentry only when it is never used.
Link: http://lkml.kernel.org/r/154725122396.11260.16053424107144453867.stgit@pluto-themaw-net
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit efad4e475c312456edb3c789d0996d12ed744c13 ]
Patch series "mm, memory_hotplug: fix uninitialized pages fallouts", v2.
Mikhail Zaslonko has posted fixes for the two bugs quite some time ago
[1]. I have pushed back on those fixes because I believed that it is
much better to plug the problem at the initialization time rather than
play whack-a-mole all over the hotplug code and find all the places
which expect the full memory section to be initialized.
We have ended up with commit 2830bf6f05fb ("mm, memory_hotplug:
initialize struct pages for the full memory section") merged and cause a
regression [2][3]. The reason is that there might be memory layouts
when two NUMA nodes share the same memory section so the merged fix is
simply incorrect.
In order to plug this hole we really have to be zone range aware in
those handlers. I have split up the original patch into two. One is
unchanged (patch 2) and I took a different approach for `removable'
crash.
[1] http://lkml.kernel.org/r/20181105150401.97287-2-zaslonko@linux.ibm.com
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1666948
[3] http://lkml.kernel.org/r/20190125163938.GA20411@dhcp22.suse.cz
This patch (of 2):
Mikhail has reported the following VM_BUG_ON triggered when reading sysfs
removable state of a memory block:
page:000003d08300c000 is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
Call Trace:
is_mem_section_removable+0xb4/0x190
show_mem_removable+0x9a/0xd8
dev_attr_show+0x34/0x70
sysfs_kf_seq_show+0xc8/0x148
seq_read+0x204/0x480
__vfs_read+0x32/0x178
vfs_read+0x82/0x138
ksys_read+0x5a/0xb0
system_call+0xdc/0x2d8
Last Breaking-Event-Address:
is_mem_section_removable+0xb4/0x190
Kernel panic - not syncing: Fatal exception: panic_on_oops
The reason is that the memory block spans the zone boundary and we are
stumbling over an unitialized struct page. Fix this by enforcing zone
range in is_mem_section_removable so that we never run away from a zone.
Link: http://lkml.kernel.org/r/20190128144506.15603-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Debugged-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2aa958c99c7fd3162b089a1a56a34a0cdb778de1 ]
Kexec-ing a kernel with "efi=noruntime" on the first kernel's command
line causes the following null pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
Call Trace:
efi_runtime_map_copy+0x28/0x30
bzImage64_load+0x688/0x872
arch_kexec_kernel_image_load+0x6d/0x70
kimage_file_alloc_init+0x13e/0x220
__x64_sys_kexec_file_load+0x144/0x290
do_syscall_64+0x55/0x1a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Just skip the EFI info setup if EFI runtime services are not enabled.
[ bp: Massage commit message. ]
Suggested-by: Dave Young <dyoung@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: bhe@redhat.com
Cc: David Howells <dhowells@redhat.com>
Cc: erik.schmauss@intel.com
Cc: fanc.fnst@cn.fujitsu.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: kexec@lists.infradead.org
Cc: lenb@kernel.org
Cc: linux-acpi@vger.kernel.org
Cc: Philipp Rudo <prudo@linux.vnet.ibm.com>
Cc: rafael.j.wysocki@intel.com
Cc: robert.moore@intel.com
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Cc: Yannik Sembritzki <yannik@sembritzki.me>
Link: https://lkml.kernel.org/r/20190118111310.29589-2-kasong@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 58d15ed1203f4d858c339ea4d7dafa94bd2a56d3 ]
The size of the fixed part of the create response is 88 bytes not 56.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0ee4b5f801b73b83a9fb3921d725f2162fd4a2e5 ]
Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.
SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.
Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
Selected by [y]:
- SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d8fc4a9f0eec20b6c07895022a6bea3fb6dfb38 ]
The issue to be fixed in this commit is when libfc found it received a
invalid FLOGI response from FC switch, it would return without freeing the
fc frame, which is just the skb data. This would cause memory leak if FC
switch keeps sending invalid FLOGI responses.
This fix is just to make it execute `fc_frame_free(fp)` before returning
from function `fc_lport_flogi_resp`.
Signed-off-by: Ming Lu <ming.lu@citrix.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80ff00172407e0aad4b10b94ef0816fc3e7813cb ]
There is a NULL pointer dereference of dev_name in nfs_parse_devname()
The oops looks something like:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
...
RIP: 0010:nfs_fs_mount+0x3b6/0xc20 [nfs]
...
Call Trace:
? ida_alloc_range+0x34b/0x3d0
? nfs_clone_super+0x80/0x80 [nfs]
? nfs_free_parsed_mount_data+0x60/0x60 [nfs]
mount_fs+0x52/0x170
? __init_waitqueue_head+0x3b/0x50
vfs_kern_mount+0x6b/0x170
do_mount+0x216/0xdc0
ksys_mount+0x83/0xd0
__x64_sys_mount+0x25/0x30
do_syscall_64+0x65/0x220
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fix this by adding a NULL check on dev_name
Signed-off-by: Yao Liu <yotta.liu@ucloud.cn>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6571ebce112a21ec9be68ef2f53b96fcd41fd81b ]
If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.
Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25384ce5f9530def39421597b1457d9462df6455 ]
This fixes the following warning at boot when the kernel is booted on a
board with more CPU cores than was configured in NR_CPUS:
smp_init_cpus: Core Count = 8
smp_init_cpus: Core Id = 0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at include/linux/cpumask.h:121 smp_init_cpus+0x54/0x74
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 5.0.0-rc3-00015-g1459333f88a0 #124
Call Trace:
__warn$part$3+0x6a/0x7c
warn_slowpath_null+0x35/0x3c
smp_init_cpus+0x54/0x74
setup_arch+0x1c0/0x1d0
start_kernel+0x44/0x310
_startup+0x107/0x107
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b1c42cdd7181200dc1fff39dcb6ac1a3fac2c25 ]
Otherwise it is impossible to enable CPUs after booting with 'maxcpus'
parameter.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 306b38305c0f86de7f17c5b091a95451dcc93d7d ]
Secondary CPU reset vector overlaps part of the double exception handler
code, resulting in weird crashes and hangups when running user code.
Move exception vectors one page up so that they don't clash with the
secondary CPU reset vector.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32a7726c4f4aadfabdb82440d84f88a5a2c8fe13 ]
- add missing memory barriers to the secondary CPU synchronization spin
loops; add comment to the matching memory barrier in the boot_secondary
and __cpu_die functions;
- use READ_ONCE/WRITE_ONCE to access cpu_start_id/cpu_start_ccount
instead of reading/writing them directly;
- re-initialize cpu_running every time before starting secondary CPU to
flush possible previous CPU startup results.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9825bd94e3a2baae1f4874767ae3a7d4c049720e ]
When a VM is terminated, the VFIO driver detaches all pass-through
devices from VFIO domain by clearing domain id and page table root
pointer from each device table entry (DTE), and then invalidates
the DTE. Then, the VFIO driver unmap pages and invalidate IOMMU pages.
Currently, the IOMMU driver keeps track of which IOMMU and how many
devices are attached to the domain. When invalidate IOMMU pages,
the driver checks if the IOMMU is still attached to the domain before
issuing the invalidate page command.
However, since VFIO has already detached all devices from the domain,
the subsequent INVALIDATE_IOMMU_PAGES commands are being skipped as
there is no IOMMU attached to the domain. This results in data
corruption and could cause the PCI device to end up in indeterministic
state.
Fix this by invalidate IOMMU pages when detach a device, and
before decrementing the per-domain device reference counts.
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Suggested-by: Joerg Roedel <joro@8bytes.org>
Co-developed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Fixes: 6de8ad9b9ee0 ('x86/amd-iommu: Make iommu_flush_pages aware of multiple IOMMUs')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53ab60baa1ac4f20b080a22c13b77b6373922fd7 ]
There is a UBSAN bug report as below:
UBSAN: Undefined behaviour in net/netfilter/ipvs/ip_vs_ctl.c:2227:21
signed integer overflow:
-2147483647 * 1000 cannot be represented in type 'int'
Reproduce program:
#include <stdio.h>
#include <sys/types.h>
#include <sys/socket.h>
#define IPPROTO_IP 0
#define IPPROTO_RAW 255
#define IP_VS_BASE_CTL (64+1024+64)
#define IP_VS_SO_SET_TIMEOUT (IP_VS_BASE_CTL+10)
/* The argument to IP_VS_SO_GET_TIMEOUT */
struct ipvs_timeout_t {
int tcp_timeout;
int tcp_fin_timeout;
int udp_timeout;
};
int main() {
int ret = -1;
int sockfd = -1;
struct ipvs_timeout_t to;
sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_RAW);
if (sockfd == -1) {
printf("socket init error\n");
return -1;
}
to.tcp_timeout = -2147483647;
to.tcp_fin_timeout = -2147483647;
to.udp_timeout = -2147483647;
ret = setsockopt(sockfd,
IPPROTO_IP,
IP_VS_SO_SET_TIMEOUT,
(char *)(&to),
sizeof(to));
printf("setsockopt return %d\n", ret);
return ret;
}
Return -EINVAL if the timeout value is negative or max than 'INT_MAX / HZ'.
Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1497e804d1a6e2bd9107ddf64b0310449f4673eb ]
This patch fixes an issue in cpumap.c when used with the TOPOLOGY
header. In some configurations, some NUMA nodes may have no CPU (empty
cpulist). Yet a cpumap map must be created otherwise perf abort with an
error. This patch handles this case by creating a dummy map.
Before:
$ perf record -o - -e cycles noploop 2 | perf script -i -
0x6e8 [0x6c]: failed to process type: 80
After:
$ perf record -o - -e cycles noploop 2 | perf script -i -
noploop for 2 seconds
Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1547885559-1657-1-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dd9ee3444014e8f28c0eefc9fffc9ac9c5248c12 ]
Recently we run a network test over ipcomp virtual tunnel.We find that
if a ipv4 packet needs fragment, then the peer can't receive
it.
We deep into the code and find that when packet need fragment the smaller
fragment will be encapsulated by ipip not ipcomp. So when the ipip packet
goes into xfrm, it's skb->dev is not properly set. The ipv4 reassembly code
always set skb'dev to the last fragment's dev. After ipv4 defrag processing,
when the kernel rp_filter parameter is set, the skb will be drop by -EXDEV
error.
This patch adds compatible support for the ipip process in ipcomp virtual tunnel.
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 47bb117911b051bbc90764a8bff96543cbd2005f upstream.
When initially testing the Camera Terminal Descriptor wTerminalType
field (buffer[4]), no mask is used. Later in the function, the MSB is
overloaded to store the descriptor subtype, and so a mask of 0x7fff
is used to check the type.
If a descriptor is specially crafted to set this overloaded bit in the
original wTerminalType field, the initial type check will fail (falling
through, without adjusting the buffer size), but the later type checks
will pass, assuming the buffer has been made suitably large, causing an
overflow.
Avoid this problem by checking for the MSB in the wTerminalType field.
If the bit is set, assume the descriptor is bad, and abort parsing it.
Originally reported here:
https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8
A similar (non-compiling) patch was provided at that time.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Alistair Strachan <astrachan@google.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cb6acd01e2e43fd8bad11155752b7699c3d0fb76 upstream.
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc54222309c ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 87c11f1ddbbad38ad8bad47af133a8208985fbdf ]
Similar to commit 44f49dd8b5a6 ("ipmr: fix possible race resulting from
improper usage of IP_INC_STATS_BH() in preemptible context."), we cannot
assume preemption is disabled when incrementing the counter and
accessing a per-CPU variable.
Preemption can be enabled when we add a route in process context that
corresponds to packets stored in the unresolved queue, which are then
forwarded using this route [1].
Fix this by using IP6_INC_STATS() which takes care of disabling
preemption on architectures where it is needed.
[1]
[ 157.451447] BUG: using __this_cpu_add() in preemptible [00000000] code: smcrouted/2314
[ 157.460409] caller is ip6mr_forward2+0x73e/0x10e0
[ 157.460434] CPU: 3 PID: 2314 Comm: smcrouted Not tainted 5.0.0-rc7-custom-03635-g22f2712113f1 #1336
[ 157.460449] Hardware name: Mellanox Technologies Ltd. MSN2100-CB2FO/SA001017, BIOS 5.6.5 06/07/2016
[ 157.460461] Call Trace:
[ 157.460486] dump_stack+0xf9/0x1be
[ 157.460553] check_preemption_disabled+0x1d6/0x200
[ 157.460576] ip6mr_forward2+0x73e/0x10e0
[ 157.460705] ip6_mr_forward+0x9a0/0x1510
[ 157.460771] ip6mr_mfc_add+0x16b3/0x1e00
[ 157.461155] ip6_mroute_setsockopt+0x3cb/0x13c0
[ 157.461384] do_ipv6_setsockopt.isra.8+0x348/0x4060
[ 157.462013] ipv6_setsockopt+0x90/0x110
[ 157.462036] rawv6_setsockopt+0x4a/0x120
[ 157.462058] __sys_setsockopt+0x16b/0x340
[ 157.462198] __x64_sys_setsockopt+0xbf/0x160
[ 157.462220] do_syscall_64+0x14d/0x610
[ 157.462349] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 0912ea38de61 ("[IPV6] MROUTE: Add stats in multicast routing module method ip6_mr_forward().")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5578de4834fe0f2a34fedc7374be691443396d1f ]
There are two array out-of-bounds memory accesses, one in
cipso_v4_map_lvl_valid(), the other in netlbl_bitmap_walk(). Both
errors are embarassingly simple, and the fixes are straightforward.
As a FYI for anyone backporting this patch to kernels prior to v4.8,
you'll want to apply the netlbl_bitmap_walk() patch to
cipso_v4_bitmap_walk() as netlbl_bitmap_walk() doesn't exist before
Linux v4.8.
Reported-by: Jann Horn <jannh@google.com>
Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine")
Fixes: 3faa8f982f95 ("netlabel: Move bitmap manipulation functions to the NetLabel core.")
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 232ba3a51cc224b339c7114888ed7f0d4d95695e ]
With Micrel KSZ8061 PHY, the link may occasionally not come up after
Ethernet cable connect. The vendor's (Microchip, former Micrel) errata
sheet 80000688A.pdf descripes the problem and possible workarounds in
detail, see below.
The batch implements workaround 1, which permanently fixes the issue.
DESCRIPTION
Link-up may not occur properly when the Ethernet cable is initially
connected. This issue occurs more commonly when the cable is connected
slowly, but it may occur any time a cable is connected. This issue occurs
in the auto-negotiation circuit, and will not occur if auto-negotiation
is disabled (which requires that the two link partners be set to the
same speed and duplex).
END USER IMPLICATIONS
When this issue occurs, link is not established. Subsequent cable
plug/unplaug cycle will not correct the issue.
WORk AROUND
There are four approaches to work around this issue:
1. This issue can be prevented by setting bit 15 in MMD device address 1,
register 2, prior to connecting the cable or prior to setting the
Restart Auto-negotiation bit in register 0h. The MMD registers are
accessed via the indirect access registers Dh and Eh, or via the Micrel
EthUtil utility as shown here:
. if using the EthUtil utility (usually with a Micrel KSZ8061
Evaluation Board), type the following commands:
> address 1
> mmd 1
> iw 2 b61a
. Alternatively, write the following registers to write to the
indirect MMD register:
Write register Dh, data 0001h
Write register Eh, data 0002h
Write register Dh, data 4001h
Write register Eh, data B61Ah
2. The issue can be avoided by disabling auto-negotiation in the KSZ8061,
either by the strapping option, or by clearing bit 12 in register 0h.
Care must be taken to ensure that the KSZ8061 and the link partner
will link with the same speed and duplex. Note that the KSZ8061
defaults to full-duplex when auto-negotiation is off, but other
devices may default to half-duplex in the event of failed
auto-negotiation.
3. The issue can be avoided by connecting the cable prior to powering-up
or resetting the KSZ8061, and leaving it plugged in thereafter.
4. If the above measures are not taken and the problem occurs, link can
be recovered by setting the Restart Auto-Negotiation bit in
register 0h, or by resetting or power cycling the device. Reset may
be either hardware reset or software reset (register 0h, bit 15).
PLAN
This errata will not be corrected in the future revision.
Fixes: 7ab59dc15e2f ("drivers/net/phy/micrel_phy: Add support for new PHYs")
Signed-off-by: Alexander Onnasch <alexander.onnasch@landisgyr.com>
Signed-off-by: Rajasingh Thavamani <T.Rajasingh@landisgyr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3da1ed7ac398f34fff1694017a07054d69c5f5c5 ]
Extract IP options in cipso_v4_error and use __icmp_send.
Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9ef6b42ad6fd7929dd1b6092cb02014e382c6a91 ]
Add __icmp_send function having ip_options struct parameter
Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 58bdd544e2933a21a51eecf17c3f5f94038261b5 ]
KASAN report this:
BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc]
Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401
CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
kasan_report+0x171/0x18d mm/kasan/report.c:321
memcpy+0x1f/0x50 mm/kasan/common.c:130
nfc_llcp_build_gb+0x37f/0x540 [nfc]
nfc_llcp_register_device+0x6eb/0xb50 [nfc]
nfc_register_device+0x50/0x1d0 [nfc]
nfcsim_device_new+0x394/0x67d [nfcsim]
? 0xffffffffc1080000
nfcsim_init+0x6b/0x1000 [nfcsim]
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003
RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
nfc_llcp_build_tlv will return NULL on fails, caller should check it,
otherwise will trigger a NULL dereference.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: eda21f16a5ed ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 692c31bd4054212312396b1d303bffab2c5b93a7 ]
When team is used in loadbalance mode a BPF filter can be used to
provide a hash which will determine the Tx port.
When the netdev is later unregistered the filter is not freed which
results in memory leaks [1].
Fix by freeing the program and the corresponding filter when
unregistering the netdev.
[1]
unreferenced object 0xffff8881dbc47cc8 (size 16):
comm "teamd", pid 3068, jiffies 4294997779 (age 438.247s)
hex dump (first 16 bytes):
a3 00 6b 6b 6b 6b 6b 6b 88 a5 82 e1 81 88 ff ff ..kkkkkk........
backtrace:
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
unreferenced object 0xffff8881e182a588 (size 2048):
comm "teamd", pid 3068, jiffies 4294997780 (age 438.247s)
hex dump (first 32 bytes):
20 00 00 00 02 00 00 00 30 00 00 00 28 f0 ff ff .......0...(...
07 00 00 00 00 00 00 00 28 00 00 00 00 00 00 00 ........(.......
backtrace:
[<000000002daf01fb>] lb_bpf_func_set+0x45c/0x6d0
[<000000008a3b47e3>] team_nl_cmd_options_set+0x88f/0x11b0
[<00000000c4f4f27e>] genl_family_rcv_msg+0x78f/0x1080
[<00000000610ef838>] genl_rcv_msg+0xca/0x170
[<00000000a281df93>] netlink_rcv_skb+0x132/0x380
[<000000004d9448a2>] genl_rcv+0x29/0x40
[<000000000321b2f4>] netlink_unicast+0x4c0/0x690
[<000000008c25dffb>] netlink_sendmsg+0x929/0xe10
[<00000000068298c5>] sock_sendmsg+0xc8/0x110
[<0000000082a61ff0>] ___sys_sendmsg+0x77a/0x8f0
[<00000000663ae29d>] __sys_sendmsg+0xf7/0x250
[<0000000027c5f11a>] do_syscall_64+0x14d/0x610
[<000000006cfbc8d3>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000e23197e2>] 0xffffffffffffffff
Fixes: 01d7f30a9f96 ("team: add loadbalance mode")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Amit Cohen <amitc@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b33b7cd6fd86478dd2890a9abeb6f036aa01fdf7 ]
Some sky2 chips fire IRQ after S3, before the driver is fully resumed:
[ 686.804877] do_IRQ: 1.37 No irq handler for vector
This is likely a platform bug that device isn't fully quiesced during
S3. Use MSI-X, maskable MSI or INTx can prevent this issue from
happening.
Since MSI-X and maskable MSI are not supported by this device, fallback
to use INTx on affected platforms.
BugLink: https://bugs.launchpad.net/bugs/1807259
BugLink: https://bugs.launchpad.net/bugs/1809843
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 895a5e96dbd6386c8e78e5b78e067dcc67b7f0ab ]
syzkaller report this:
BUG: memory leak
unreferenced object 0xffff88837a71a500 (size 256):
comm "syz-executor.2", pid 9770, jiffies 4297825125 (age 17.843s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 20 c0 ef 86 ff ff ff ff ........ .......
backtrace:
[<00000000db12624b>] netdev_register_kobject+0x124/0x2e0 net/core/net-sysfs.c:1751
[<00000000dc49a994>] register_netdevice+0xcc1/0x1270 net/core/dev.c:8516
[<00000000e5f3fea0>] tun_set_iff drivers/net/tun.c:2649 [inline]
[<00000000e5f3fea0>] __tun_chr_ioctl+0x2218/0x3d20 drivers/net/tun.c:2883
[<000000001b8ac127>] vfs_ioctl fs/ioctl.c:46 [inline]
[<000000001b8ac127>] do_vfs_ioctl+0x1a5/0x10e0 fs/ioctl.c:690
[<0000000079b269f8>] ksys_ioctl+0x89/0xa0 fs/ioctl.c:705
[<00000000de649beb>] __do_sys_ioctl fs/ioctl.c:712 [inline]
[<00000000de649beb>] __se_sys_ioctl fs/ioctl.c:710 [inline]
[<00000000de649beb>] __x64_sys_ioctl+0x74/0xb0 fs/ioctl.c:710
[<000000007ebded1e>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290
[<00000000db315d36>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<00000000115be9bb>] 0xffffffffffffffff
It should call kset_unregister to free 'dev->queues_kset'
in error path of register_queue_kobjects, otherwise will cause a mem leak.
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 1d24eb4815d1 ("xps: Transmit Packet Steering")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd9d3d86b08d6a106830364879c42c78db85389c upstream.
Here is how this device appears in kernel log:
usb 3-1: new full-speed USB device number 18 using xhci_hcd
usb 3-1: New USB device found, idVendor=0b00, idProduct=3070
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Ingenico 3070
usb 3-1: Manufacturer: Silicon Labs
usb 3-1: SerialNumber: 0001
Apparently this is a POS terminal with embedded USB-to-Serial converter.
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a1d52994d440e21def1c2174932410b4f2a98a1 upstream.
security_mmap_addr() does a capability check with current_cred(), but
we can reach this code from contexts like a VFS write handler where
current_cred() must not be used.
This can be abused on systems without SMAP to make NULL pointer
dereferences exploitable again.
Fixes: 8869477a49c3 ("security: protect from stack expansion into low vm addresses")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream.
When using the mmc_spi driver with a card-detect pin, I noticed that the
card was not detected immediately after probe, but only after it was
unplugged and plugged back in (and the CD IRQ fired).
The call tree looks something like this:
mmc_spi_probe
mmc_add_host
mmc_start_host
_mmc_detect_change
mmc_schedule_delayed_work(&host->detect, 0)
mmc_rescan
host->bus_ops->detect(host)
mmc_detect
_mmc_detect_card_removed
host->ops->get_cd(host)
mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set)
mmc_gpiod_request_cd
ctx->cd_gpio = desc
To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ
is registered.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
