summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-31Merge branch 'locking-core-for-linus' of ↵Linus Torvalds85-702/+1611
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Continued user-access cleanups in the futex code. - percpu-rwsem rewrite that uses its own waitqueue and atomic_t instead of an embedded rwsem. This addresses a couple of weaknesses, but the primary motivation was complications on the -rt kernel. - Introduce raw lock nesting detection on lockdep (CONFIG_PROVE_RAW_LOCK_NESTING=y), document the raw_lock vs. normal lock differences. This too originates from -rt. - Reuse lockdep zapped chain_hlocks entries, to conserve RAM footprint on distro-ish kernels running into the "BUG: MAX_LOCKDEP_CHAIN_HLOCKS too low!" depletion of the lockdep chain-entries pool. - Misc cleanups, smaller fixes and enhancements - see the changelog for details" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits) fs/buffer: Make BH_Uptodate_Lock bit_spin_lock a regular spinlock_t thermal/x86_pkg_temp: Make pkg_temp_lock a raw_spinlock_t Documentation/locking/locktypes: Minor copy editor fixes Documentation/locking/locktypes: Further clarifications and wordsmithing m68knommu: Remove mm.h include from uaccess_no.h x86: get rid of user_atomic_cmpxchg_inatomic() generic arch_futex_atomic_op_inuser() doesn't need access_ok() x86: don't reload after cmpxchg in unsafe_atomic_op2() loop x86: convert arch_futex_atomic_op_inuser() to user_access_begin/user_access_end() objtool: whitelist __sanitizer_cov_trace_switch() [parisc, s390, sparc64] no need for access_ok() in futex handling sh: no need of access_ok() in arch_futex_atomic_op_inuser() futex: arch_futex_atomic_op_inuser() calling conventions change completion: Use lockdep_assert_RT_in_threaded_ctx() in complete_all() lockdep: Add posixtimer context tracing bits lockdep: Annotate irq_work lockdep: Add hrtimer context tracing bits lockdep: Introduce wait-type checks completion: Use simple wait queues sched/swait: Prepare usage in completions ...
2020-03-31Merge branch 'efi-core-for-linus' of ↵Linus Torvalds73-2685/+2933
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI updates from Ingo Molnar: "The EFI changes in this cycle are much larger than usual, for two (positive) reasons: - The GRUB project is showing signs of life again, resulting in the introduction of the generic Linux/UEFI boot protocol, instead of x86 specific hacks which are increasingly difficult to maintain. There's hope that all future extensions will now go through that boot protocol. - Preparatory work for RISC-V EFI support. The main changes are: - Boot time GDT handling changes - Simplify handling of EFI properties table on arm64 - Generic EFI stub cleanups, to improve command line handling, file I/O, memory allocation, etc. - Introduce a generic initrd loading method based on calling back into the firmware, instead of relying on the x86 EFI handover protocol or device tree. - Introduce a mixed mode boot method that does not rely on the x86 EFI handover protocol either, and could potentially be adopted by other architectures (if another one ever surfaces where one execution mode is a superset of another) - Clean up the contents of 'struct efi', and move out everything that doesn't need to be stored there. - Incorporate support for UEFI spec v2.8A changes that permit firmware implementations to return EFI_UNSUPPORTED from UEFI runtime services at OS runtime, and expose a mask of which ones are supported or unsupported via a configuration table. - Partial fix for the lack of by-VA cache maintenance in the decompressor on 32-bit ARM. - Changes to load device firmware from EFI boot service memory regions - Various documentation updates and minor code cleanups and fixes" * 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (114 commits) efi/libstub/arm: Fix spurious message that an initrd was loaded efi/libstub/arm64: Avoid image_base value from efi_loaded_image partitions/efi: Fix partition name parsing in GUID partition entry efi/x86: Fix cast of image argument efi/libstub/x86: Use ULONG_MAX as upper bound for all allocations efi: Fix a mistype in comments mentioning efivar_entry_iter_begin() efi/libstub: Avoid linking libstub/lib-ksyms.o into vmlinux efi/x86: Preserve %ebx correctly in efi_set_virtual_address_map() efi/x86: Ignore the memory attributes table on i386 efi/x86: Don't relocate the kernel unless necessary efi/x86: Remove extra headroom for setup block efi/x86: Add kernel preferred address to PE header efi/x86: Decompress at start of PE image load address x86/boot/compressed/32: Save the output address instead of recalculating it efi/libstub/x86: Deal with exit() boot service returning x86/boot: Use unsigned comparison for addresses efi/x86: Avoid using code32_start efi/x86: Make efi32_pe_entry() more readable efi/x86: Respect 32-bit ABI in efi32_pe_entry() efi/x86: Annotate the LOADED_IMAGE_PROTOCOL_GUID with SYM_DATA ...
2020-03-31Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds34-294/+1015
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "The main changes in this cycle were: - Make kfree_rcu() use kfree_bulk() for added performance - RCU updates - Callback-overload handling updates - Tasks-RCU KCSAN and sparse updates - Locking torture test and RCU torture test updates - Documentation updates - Miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (74 commits) rcu: Make rcu_barrier() account for offline no-CBs CPUs rcu: Mark rcu_state.gp_seq to detect concurrent writes Documentation/memory-barriers: Fix typos doc: Add rcutorture scripting to torture.txt doc/RCU/rcu: Use https instead of http if possible doc/RCU/rcu: Use absolute paths for non-rst files doc/RCU/rcu: Use ':ref:' for links to other docs doc/RCU/listRCU: Update example function name doc/RCU/listRCU: Fix typos in a example code snippets doc/RCU/Design: Remove remaining HTML tags in ReST files doc: Add some more RCU list patterns in the kernel rcutorture: Set KCSAN Kconfig options to detect more data races rcutorture: Manually clean up after rcu_barrier() failure rcutorture: Make rcu_torture_barrier_cbs() post from corresponding CPU rcuperf: Measure memory footprint during kfree_rcu() test rcutorture: Annotation lockless accesses to rcu_torture_current rcutorture: Add READ_ONCE() to rcu_torture_count and rcu_torture_batch rcutorture: Fix stray access to rcu_fwd_cb_nodelay rcutorture: Fix rcu_torture_one_read()/rcu_torture_writer() data race rcutorture: Make kvm-find-errors.sh abort on bad directory ...
2020-03-31Merge branch 'core-objtool-for-linus' of ↵Linus Torvalds12-211/+429
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "The biggest changes in this cycle were the vmlinux.o optimizations by Peter Zijlstra, which are preparatory and optimization work to run objtool against the much richer vmlinux.o object file, to perform new, whole-program section based logic. That work exposed a handful of problems with the existing code, which fixes and optimizations are merged here. The complete 'vmlinux.o and noinstr' work is still work in progress, targeted for v5.8. There's also assorted fixes and enhancements from Josh Poimboeuf. In particular I'd like to draw attention to commit 644592d328370, which turns fatal objtool errors into failed kernel builds. This behavior is IMO now justified on multiple grounds (it's easy currently to not notice an essentially corrupted kernel build), and the commit has been in -next testing for several weeks, but there could still be build failures with old or weird toolchains. Should that be widespread or high profile enough then I'd suggest a quick revert, to not hold up the merge window" * 'core-objtool-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) objtool: Re-arrange validate_functions() objtool: Optimize find_rela_by_dest_range() objtool: Delete cleanup() objtool: Optimize read_sections() objtool: Optimize find_symbol_by_name() objtool: Resize insn_hash objtool: Rename find_containing_func() objtool: Optimize find_symbol_*() and read_symbols() objtool: Optimize find_section_by_name() objtool: Optimize find_section_by_index() objtool: Add a statistics mode objtool: Optimize find_symbol_by_index() x86/kexec: Make relocate_kernel_64.S objtool clean x86/kexec: Use RIP relative addressing objtool: Rename func_for_each_insn_all() objtool: Rename func_for_each_insn() objtool: Introduce validate_return() objtool: Improve call destination function detection objtool: Fix clang switch table edge case objtool: Add relocation check for alternative sections ...
2020-03-31Merge tag 'pnp-5.7-rc1' of ↵Linus Torvalds3-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull PNP subsystem updates from Rafael Wysocki: - Update MAINTAINERS to cover include/linux/pnp.h and add the linux-acpi list to the PNP entry in it - add the const modifier to the name field definition in struct pnp_driver - drop a pointer case in the RTC CMOS driver that has become redundant All by Corentin Labbe. * tag 'pnp-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: MAINTAINERS: Add linux-acpi list to PNP rtc: cmos: remove useless cast for driver_name PNP: constify driver name PNP: add missing include/linux/pnp.h to MAINTAINERS
2020-03-31Merge tag 'acpi-5.7-rc1' of ↵Linus Torvalds29-260/+298
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: - Update the ACPICA code in the kernel to the 20200214 upstream release including: * Fix to re-enable the sleep button after wakeup (Anchal Agarwal). * Fixes for mistakes in comments and typos (Bob Moore). * ASL-ASL+ converter updates (Erik Kaneda). * Type casting cleanups (Sven Barth). - Clean up the intialization of the EC driver and eliminate some dead code from it (Rafael Wysocki). - Clean up the quirk tables in the AC and battery drivers (Hans de Goede). - Fix the global lock handling on x86 to ignore unspecified bit positions in the global lock field (Jan Engelhardt). - Add a new "tiny" driver for ACPI button devices exposed by VMs to guest kernels to send signals directly to init (Josh Triplett). - Add a kernel parameter to disable ACPI BGRT on x86 (Alex Hung). - Make the ACPI PCI host bridge and fan drivers use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Clean up assorted pieces of code: * Reorder "asmlinkage" to make g++ happy (Alexey Dobriyan). * Drop unneeded variable initialization (Colin Ian King). * Add missing __acquires/__releases annotations (Jules Irenge). * Replace list_for_each_safe() with list_for_each_entry_safe() (chenqiwu)" * tag 'acpi-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits) ACPICA: Update version to 20200214 ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow ACPI: fan: Use scnprintf() for avoiding potential buffer overflow ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code acpi/x86: ignore unspecified bit positions in the ACPI global lock field acpi/x86: add a kernel parameter to disable ACPI BGRT x86/acpi: make "asmlinkage" part first thing in the function definition ACPI: list_for_each_safe() -> list_for_each_entry_safe() ACPI: video: remove redundant assignments to variable result ACPI: OSL: Add missing __acquires/__releases annotations ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() ...
2020-03-31Merge tag 'pm-5.7-rc1' of ↵Linus Torvalds79-1573/+1564
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These clean up and rework the PM QoS API, address a suspend-to-idle wakeup regression on some ACPI-based platforms, clean up and extend a few cpuidle drivers, update multiple cpufreq drivers and cpufreq documentation, and fix a number of issues in devfreq and several other things all over. Specifics: - Clean up and rework the PM QoS API to simplify the code and reduce the size of it (Rafael Wysocki). - Fix a suspend-to-idle wakeup regression on Dell XPS13 9370 and similar platforms where the USB plug/unplug events are handled by the EC (Rafael Wysocki). - CLean up the intel_idle and PSCI cpuidle drivers (Rafael Wysocki, Ulf Hansson). - Extend the haltpoll cpuidle driver so that it can be forced to run on some systems where it refused to load (Maciej Szmigiero). - Convert several cpufreq documents to the .rst format and move the legacy driver documentation into one common file (Mauro Carvalho Chehab, Rafael Wysocki). - Update several cpufreq drivers: * Extend and fix the imx-cpufreq-dt driver (Anson Huang). * Improve the -EPROBE_DEFER handling and fix unwanted CPU overclocking on i.MX6ULL in imx6q-cpufreq (Anson Huang, Christoph Niedermaier). * Add support for Krait based SoCs to the qcom driver (Ansuel Smith). * Add support for OPP_PLUS to ti-cpufreq (Lokesh Vutla). * Add platform specific intermediate callbacks support to cpufreq-dt and update the imx6q driver (Peng Fan). * Simplify and consolidate some pieces of the intel_pstate driver and update its documentation (Rafael Wysocki, Alex Hung). - Fix several devfreq issues: * Remove unneeded extern keyword from a devfreq header file and use the DEVFREQ_GOV_UPDATE_INTERNAL event name instead of DEVFREQ_GOV_INTERNAL (Chanwoo Choi). * Fix the handling of dev_pm_qos_remove_request() result (Leonard Crestez). * Use constant name for userspace governor (Pierre Kuo). * Get rid of doc warnings and fix a typo (Christophe JAILLET). - Use built-in RCU list checking in some places in the PM core to avoid false-positive RCU usage warnings (Madhuparna Bhowmik). - Add explicit READ_ONCE()/WRITE_ONCE() annotations to low-level PM QoS routines (Qian Cai). - Fix removal of wakeup sources to avoid NULL pointer dereferences in a corner case (Neeraj Upadhyay). - Clean up the handling of hibernate compat ioctls and fix the related documentation (Eric Biggers). - Update the idle_inject power capping driver to use variable-length arrays instead of zero-length arrays (Gustavo Silva). - Fix list format in a PM QoS document (Randy Dunlap). - Make the cpufreq stats module use scnprintf() to avoid potential buffer overflows (Takashi Iwai). - Add pm_runtime_get_if_active() to PM-runtime API (Sakari Ailus). - Allow no domain-idle-states DT property in generic PM domains (Ulf Hansson). - Fix a broken y-axis scale in the intel_pstate_tracer utility (Doug Smythies)" * tag 'pm-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (78 commits) cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() tools/power/x86/intel_pstate_tracer: fix a broken y-axis scale ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer Documentation: intel_pstate: update links for references ...
2020-03-31Merge tag 'regulator-spi-v5.7' of ↵Linus Torvalds62-1322/+4159
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc Pull spi and regulator updates from Mark Brown: "At one point in the release cycle I managed to fat finger things and apply some SPI fixes onto a regulator branch and merge that into the SPI tree, then pull in a change shared with the MTD tree moving the Mediatek quadspi driver over to become the Mediatek spi-nor driver in the SPI tree. This has made a mess which I only just noticed while preparing this and I can't see a sensible way to unpick things due to other subsequent merge commits especially the pull from MTD so it looks like the most sensible thing to do is give up and combine the two pull requests. Fortunately both subsystems were fairly quiet this cycle, the highlights are: regulator: - Support for Monoloithic Power Systems MP5416, MP8867 and MPS8869 and Qualcomm PMI8994 and SMB208. SPI: - Lots of enhancements for spi-fsl-dspi, including XSPI mode support, from Vladimir Oltean. - Support for amlogic Meson G12A, IBM FSI, Mediatek spi-nor (moved from MTD), NXP i.MX8Mx, Rockchip PX30, RK3308 and RK3328, and Qualcomm Atheros AR934x/QCA95xx" * tag 'regulator-spi-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc: (118 commits) spi: efm32: Convert to use GPIO descriptors regulator: qcom_smd: Add pmi8994 regulator support regulator: da9063: Fix get_mode() functions to read sleep field spi: spi-fsl-lpspi: Replace zero-length array with flexible-array member spi: spi-s3c24xx: Replace zero-length array with flexible-array member spi: stm32: Fix comments compilation warnings spi: atmel-quadspi: Add verbose debug facilities to monitor register accesses spi: spi-fsl-dspi: Add support for LS1028A spi: spi-fsl-dspi: Move invariant configs out of dspi_transfer_one_message spi: spi-fsl-dspi: Fix interrupt-less DMA mode taking an XSPI code path spi: spi-fsl-dspi: Avoid NULL pointer in dspi_slave_abort for non-DMA mode spi: spi-fsl-dspi: Replace interruptible wait queue with a simple completion spi: spi-fsl-dspi: Protect against races on dspi->words_in_flight spi: spi-fsl-dspi: Avoid reading more data than written in EOQ mode spi: spi-fsl-dspi: Fix bits-per-word acceleration in DMA mode spi: spi-fsl-dspi: Fix little endian access to PUSHR CMD and TXDATA spi: spi-fsl-dspi: Don't access reserved fields in SPI_MCR regulator: driver.h: fix regulator_map_* function names regulator: da9063: fix suspend spi: mxs: Drop GPIO includes ...
2020-03-31Merge tag 'regmap-v5.7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regma: update from Mark Brown: "Only one small documentation fix for regmap this time around" * tag 'regmap-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: wrong descriptions in regmap_range_cfg
2020-03-31Merge tag 'staging-5.7-rc1' of ↵Linus Torvalds498-47977/+20196
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver updates from Greg KH: "Here is the big staging and IIO driver pull request for 5.7-rc1. We again end up deleting more code than we added here, thanks to finally getting rid of the old and obsolete wireless USB stuff, and the exfat code (which is coming in again through the vfs tree in a much cleaner version). But some code does come back, with the octeon drivers being found to actually be used in the wild, so those deletions are now reverted. Other than those major things, just loads and loads of tiny checkpatch cleanups all over the place, along with new IIO drivers and fixes. All have been in linux-next with no reported issues" [ Stephen Rothwell points out some reported issues due to merge conflicts ] * tag 'staging-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (415 commits) staging: vt6656: Use DIV_ROUND_UP macro instead of specific code staging: remove hp100 driver staging: wilc1000: Use crc7 in lib/ rather than a private copy Staging: rtl8192u: ieee80211: Use netdev_alert(). Staging: rtl8192u: ieee80211: Use netdev_info() with network devices. Staging: rtl8192u: ieee80211: Use netdev_warn() for network devices. Staging: rtl8192u: ieee80211: Use netdev_dbg() for debug messages. staging: wlan-ng: fix use-after-free Read in hfa384x_usbin_callback staging: rtl8723bs: hal: Remove NULL check before kfree staging: rtl8723bs: hal: Correct typos in comments staging: rtl8723bs: os_dep: Correct typos in comments staging: rtl8723bs: core: Correct typos in comments staging: rtl8723bs: hal: Remove unnecessary cast on void pointer staging: rtl8188eu: cleanup long line in odm.c staging: rtl8723bs: hal: Compress return logic staging: rtl8723bs: rtw_cmd: Compress lines for immediate return staging: rtl8723bs: rtw_efuse: Compress lines for immediate return staging: wilc1000: remove label from examples in DT binding documentation staging: rtl8723bs: Remove blank line before '}' brace Staging: rtl8188eu: hal: Add space around operators ...
2020-03-30Merge tag 'driver-core-5.7-rc1' of ↵Linus Torvalds48-174/+996
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the "big" set of driver core changes for 5.7-rc1. Nothing huge in here, just lots of little firmware core changes and use of new apis, a libfs fix, a debugfs api change, and some driver core deferred probe rework. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (44 commits) Revert "driver core: Set fw_devlink to "permissive" behavior by default" driver core: Set fw_devlink to "permissive" behavior by default driver core: Replace open-coded list_last_entry() driver core: Read atomic counter once in driver_probe_done() libfs: fix infoleak in simple_attr_read() driver core: Add device links from fwnode only for the primary device platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet platform/x86: touchscreen_dmi: Add EFI embedded firmware info support Input: icn8505 - Switch to firmware_request_platform for retreiving the fw Input: silead - Switch to firmware_request_platform for retreiving the fw selftests: firmware: Add firmware_request_platform tests test_firmware: add support for firmware_request_platform firmware: Add new platform fallback mechanism and firmware_request_platform() Revert "drivers: base: power: wakeup.c: Use built-in RCU list checking" drivers: base: power: wakeup.c: Use built-in RCU list checking component: allow missing unbind callback debugfs: remove return value of debugfs_create_file_size() debugfs: Check module state before warning in {full/open}_proxy_open() firmware: fix a double abort case with fw_load_sysfs_fallback arch_topology: Fix putting invalid cpu clk ...
2020-03-30Merge tag 'usb-5.7-rc1' of ↵Linus Torvalds212-1742/+11167
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / PHY updates from Greg KH: "Here are the big set of USB and PHY driver patches for 5.7-rc1. Nothing huge here, some new PHY drivers, loads of USB gadget fixes and updates, xhci updates, usb-serial driver updates and new device ids, and other minor things. Full details in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (239 commits) USB: cdc-acm: restore capability check order usb: cdns3: make signed 1 bit bitfields unsigned usb: gadget: fsl: remove unused variable 'driver_desc' usb: gadget: f_fs: Fix use after free issue as part of queue failure usb: typec: Correct the documentation for typec_cable_put() USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback USB: serial: option: add Wistron Neweb D19Q1 USB: serial: option: add BroadMobi BM806U USB: serial: option: add support for ASKEY WWHC050 usb: core: Add ACPI support for USB interface devices driver core: platform: Reimplement devm_platform_ioremap_resource usb: dwc2: convert to devm_platform_get_and_ioremap_resource usb: host: hisilicon: convert to devm_platform_get_and_ioremap_resource usb: host: xhci-plat: convert to devm_platform_get_and_ioremap_resource drivers: provide devm_platform_get_and_ioremap_resource() phy: qcom-qusb2: Add new overriding tuning parameters in QUSB2 V2 PHY phy: qcom-qusb2: Add support for overriding tuning parameters in QUSB2 V2 PHY dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters phy: qcom-qusb2: Add generic QUSB2 V2 PHY support dt-bindings: phy: qcom,qusb2: Add compatibles for QUSB2 V2 phy and SC7180 ...
2020-03-30Merge tag 'media/v5.7-1' of ↵Linus Torvalds343-3012/+14879
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - New sensor driver: imx219 - Support for some new pixelformats - Support for Sun8i SoC - Added more codecs to meson vdec driver - Prepare for removing the legacy usbvision driver by moving it to staging. This driver has issues and use legacy core APIs. If nobody steps up to address those, it is time for its retirement. - Several cleanups and improvements on drivers, with the addition of new supported boards * tag 'media/v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (236 commits) media: venus: firmware: Ignore secure call error on first resume media: mtk-vpu: load vpu firmware from the new location media: i2c: video-i2c: fix build errors due to 'imply hwmon' media: MAINTAINERS: add myself to co-maintain Hantro G1/G2 for i.MX8MQ media: hantro: add initial i.MX8MQ support media: dt-bindings: Document i.MX8MQ VPU bindings media: vivid: fix incorrect PA assignment to HDMI outputs media: hantro: Add linux-rockchip mailing list to MAINTAINERS media: cedrus: h264: Fix 4K decoding on H6 media: siano: Use scnprintf() for avoiding potential buffer overflow media: rc: Use scnprintf() for avoiding potential buffer overflow media: allegro: create new struct for channel parameters media: allegro: move mail definitions to separate file media: allegro: pass buffers through firmware media: allegro: verify source and destination buffer in VCU response media: allegro: handle dependency of bitrate and bitrate_peak media: allegro: read bitrate mode directly from control media: allegro: make QP configurable media: allegro: make frame rate configurable media: allegro: skip filler data if possible ...
2020-03-30Merge tag 'hwmon-for-v5.7' of ↵Linus Torvalds41-311/+2325
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: - New driver for AXI fan control - Attenuator bypass support and support for inverting pwm output in adt7475 driver - Support for new power supply version in ibm-cffps driver - PMBus drivers: * support for multi-phase chips * ltc2978 driver: add support for LTC2972, LTC2979, LTC3884, LTC3889, LTC7880, LTM4664, LTM4677, LTM4678, LTM4680, and LTM4700/ * tps53679 driver: add support for TPS53681, TPS53647, and TPS53667 * isl68137 driver: support for various 2nd Gen Renesas digital multiphase chips added to isl68137 driver - Minor improvements and fixes in nct7904, ibmpowernv, lm73, ibmaem, and k10temp drivers * tag 'hwmon-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (29 commits) docs: hwmon: Update documentation for isl68137 pmbus driver hwmon: (pmbus) add support for 2nd Gen Renesas digital multiphase hwmon: (pmbus/ibm-cffps) Add another PSU CCIN to version detection hwmon: (nct7904) Fix the incorrect quantity for fan & temp attributes hwmon: (ibmpowernv) Use scnprintf() for avoiding potential buffer overflow hwmon: (adt7475) Add support for inverting pwm output hwmon: (adt7475) Add attenuator bypass support dt-bindings: hwmon: Document adt7475 pwm-active-state property dt-bindings: hwmon: Document adt7475 bypass-attenuator property dt-bindings: hwmon: Document adt7475 binding hwmon: (lm73) Add support for of_match_table dt-bindings: Add TI LM73 as a trivial device hwmon: (pmbus/tps53679) Add documentation hwmon: (pmbus/tps53679) Add support for TPS53647 and TPS53667 hwmon: (pmbus/tps53679) Add support for TPS53681 hwmon: (pmbus/tps53679) Add support for IIN and PIN to TPS53679 and TPS53688 hwmon: (pmbus/tps53679) Add support for multiple chips IDs hwmon: (pmbus) Implement multi-phase support hwmon: (pmbus) Add 'phase' parameter where needed for multi-phase support hwmon: (pmbus) Add IC_DEVICE_ID and IC_DEVICE_REV command definitions ...
2020-03-30Merge tag 'ras_updates_for_5.7' of ↵Linus Torvalds7-23/+84
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Do not report spurious MCEs on some Intel platforms caused by errata; by Prarit Bhargava. - Change dev-mcelog's hardcoded limit of 32 error records to a dynamic one, controlled by the number of logical CPUs, by Tony Luck. - Add support for the processor identification number (PPIN) on AMD, by Wei Huang. * tag 'ras_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/amd: Add PPIN support for AMD MCE x86/mce/dev-mcelog: Dynamically allocate space for machine check records x86/mce: Do not log spurious corrected mce errors
2020-03-30Merge tag 'edac_updates_for_5.7' of ↵Linus Torvalds14-378/+1054
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - A substantial edac_mc cleanup, sanitizing object freeing, streamlining and simplifying code flow, and getting rid of a lot of needless complexity in memory controller representation code, by Robert Richter. - A new EDAC driver for the ARM DMC-520 memory controller, by Lei Wang, Shiping Ji and others. - The usual sprinkling of misc cleanups and fixes all over the subsystem. * tag 'edac_updates_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/armada_xp: Use scnprintf() for avoiding potential buffer overflow EDAC/synopsys: Do not dump uninitialized pinf->col EDAC: Add EDAC driver for DMC520 dt-bindings: edac: Dmc-520.yaml EDAC/mce_amd: Print !SMCA processor warning only once EDAC/mc: Remove per layer counters EDAC/mc: Remove detail[] string and cleanup error string generation EDAC/mc: Pass the error descriptor to error reporting functions EDAC/mc: Remove enable_per_layer_report function argument EDAC/mc: Report "unknown memory" on too many DIMM labels found EDAC/mc: Carve out error increment into a separate function EDAC/mc: Determine mci pointer from the error descriptor EDAC: Store error type in struct edac_raw_error_desc EDAC/mc: Reorder functions edac_mc_alloc*() EDAC/mc: Split edac_mc_alloc() into smaller functions EDAC/mc: Change mci device removal to use put_device()
2020-03-30Merge tag 'pstore-v5.7-rc1' of ↵Linus Torvalds4-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore updates from Kees Cook: "These mostly some minor cleanups and a bug fix for an ftrace corner case: - Improve failure paths (chenqiwu) - Fix ftrace position index (Vasily Averin) - Use proper flexible-array member (Gustavo A. R. Silva)" * tag 'pstore-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Replace zero-length array with flexible-array member pstore: pstore_ftrace_seq_next should increase position index pstore/ram: remove unnecessary ramoops_unregister_dummy() pstore/platform: fix potential mem leak if pstore_init_fs failed
2020-03-30Merge tag 'seccomp-v5.7-rc1' of ↵Linus Torvalds4-6/+87
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "A couple of seccomp updates. They're both mostly bug fixes that I wanted to have sit in linux-next for a while: - allow TSYNC and USER_NOTIF together (Tycho Andersen) - add missing compat_ioctl for notify (Sven Schnelle)" * tag 'seccomp-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Add missing compat_ioctl for notify seccomp: allow TSYNC and USER_NOTIF together
2020-03-30Merge tag 'erofs-for-5.7-rc1' of ↵Linus Torvalds6-106/+94
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs updates from Gao Xiang: "Updates with a XArray adaptation, several fixes for shrinker and corrupted images are ready for this cycle. All commits have been stress tested with no noticeable smoke out and have been in linux-next as well. Summary: - Convert radix tree usage to XArray - Fix shrink scan count on multiple filesystem instances - Better handling for specific corrupted images - Update my email address in MAINTAINERS" * tag 'erofs-for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: MAINTAINERS: erofs: update my email address erofs: handle corrupted images whose decompressed size less than it'd be erofs: use LZ4_decompress_safe() for full decoding erofs: correct the remaining shrink objects erofs: convert workstn to XArray
2020-03-30Merge tag 'docs-5.7' of git://git.lwn.net/linuxLinus Torvalds141-3292/+4570
Pull documentation updates from Jonathan Corbet: "This has been a busy cycle for documentation work. Highlights include: - Lots of RST conversion work by Mauro, Daniel ALmeida, and others. Maybe someday we'll get to the end of this stuff...maybe... - Some organizational work to bring some order to the core-api manual. - Various new docs and additions to the existing documentation. - Typo fixes, warning fixes, ..." * tag 'docs-5.7' of git://git.lwn.net/linux: (123 commits) Documentation: x86: exception-tables: document CONFIG_BUILDTIME_TABLE_SORT MAINTAINERS: adjust to filesystem doc ReST conversion docs: deprecated.rst: Add BUG()-family doc: zh_CN: add translation for virtiofs doc: zh_CN: index files in filesystems subdirectory docs: locking: Drop :c:func: throughout docs: locking: Add 'need' to hardirq section docs: conf.py: avoid thousands of duplicate label warning on Sphinx docs: prevent warnings due to autosectionlabel docs: fix reference to core-api/namespaces.rst docs: fix pointers to io-mapping.rst and io_ordering.rst files Documentation: Better document the softlockup_panic sysctl docs: hw-vuln: tsx_async_abort.rst: get rid of an unused ref docs: perf: imx-ddr.rst: get rid of a warning docs: filesystems: fuse.rst: supress a Sphinx warning docs: translations: it: avoid duplicate refs at programming-language.rst docs: driver.rst: supress two ReSt warnings docs: trace: events.rst: convert some new stuff to ReST format Documentation: Add io_ordering.rst to driver-api manual Documentation: Add io-mapping.rst to driver-api manual ...
2020-03-30Merge tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds12-856/+1826
Pull io_uring updates from Jens Axboe: "Here are the io_uring changes for this merge window. Light on new features this time around (just splice + buffer selection), lots of cleanups, fixes, and improvements to existing support. In particular, this contains: - Cleanup fixed file update handling for stack fallback (Hillf) - Re-work of how pollable async IO is handled, we no longer require thread offload to handle that. Instead we rely using poll to drive this, with task_work execution. - In conjunction with the above, allow expendable buffer selection, so that poll+recv (for example) no longer has to be a split operation. - Make sure we honor RLIMIT_FSIZE for buffered writes - Add support for splice (Pavel) - Linked work inheritance fixes and optimizations (Pavel) - Async work fixes and cleanups (Pavel) - Improve io-wq locking (Pavel) - Hashed link write improvements (Pavel) - SETUP_IOPOLL|SETUP_SQPOLL improvements (Xiaoguang)" * tag 'for-5.7/io_uring-2020-03-29' of git://git.kernel.dk/linux-block: (54 commits) io_uring: cleanup io_alloc_async_ctx() io_uring: fix missing 'return' in comment io-wq: handle hashed writes in chains io-uring: drop 'free_pfile' in struct io_file_put io-uring: drop completion when removing file io_uring: Fix ->data corruption on re-enqueue io-wq: close cancel gap for hashed linked work io_uring: make spdxcheck.py happy io_uring: honor original task RLIMIT_FSIZE io-wq: hash dependent work io-wq: split hashing and enqueueing io-wq: don't resched if there is no work io-wq: remove duplicated cancel code io_uring: fix truncated async read/readv and write/writev retry io_uring: dual license io_uring.h uapi header io_uring: io_uring_enter(2) don't poll while SETUP_IOPOLL|SETUP_SQPOLL enabled io_uring: Fix unused function warnings io_uring: add end-of-bits marker and build time verify it io_uring: provide means of removing buffers io_uring: add IOSQE_BUFFER_SELECT support for IORING_OP_RECVMSG ...
2020-03-30Merge tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds39-976/+1774
Pull block driver updates from Jens Axboe: - floppy driver cleanup series from Willy - NVMe updates and fixes (Various) - null_blk trace improvements (Chaitanya) - bcache fixes (Coly) - md fixes (via Song) - loop block size change optimizations (Martijn) - scnprintf() use (Takashi) * tag 'for-5.7/drivers-2020-03-29' of git://git.kernel.dk/linux-block: (81 commits) null_blk: add trace in null_blk_zoned.c null_blk: add tracepoint helpers for zoned mode block: add a zone condition debug helper nvme: cleanup namespace identifier reporting in nvme_init_ns_head nvme: rename __nvme_find_ns_head to nvme_find_ns_head nvme: refactor nvme_identify_ns_descs error handling nvme-tcp: Add warning on state change failure at nvme_tcp_setup_ctrl nvme-rdma: Add warning on state change failure at nvme_rdma_setup_ctrl nvme: Fix controller creation races with teardown flow nvme: Make nvme_uninit_ctrl symmetric to nvme_init_ctrl nvme: Fix ctrl use-after-free during sysfs deletion nvme-pci: Re-order nvme_pci_free_ctrl nvme: Remove unused return code from nvme_delete_ctrl_sync nvme: Use nvme_state_terminal helper nvme: release ida resources nvme: Add compat_ioctl handler for NVME_IOCTL_SUBMIT_IO nvmet-tcp: optimize tcp stack TX when data digest is used nvme-fabrics: Use scnprintf() for avoiding potential buffer overflow nvme-multipath: do not reset on unknown status nvmet-rdma: allocate RW ctxs according to mdts ...
2020-03-30Merge tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds111-2039/+1950
Pull block updates from Jens Axboe: - Online capacity resizing (Balbir) - Number of hardware queue change fixes (Bart) - null_blk fault injection addition (Bart) - Cleanup of queue allocation, unifying the node/no-node API (Christoph) - Cleanup of genhd, moving code to where it makes sense (Christoph) - Cleanup of the partition handling code (Christoph) - disk stat fixes/improvements (Konstantin) - BFQ improvements (Paolo) - Various fixes and improvements * tag 'for-5.7/block-2020-03-29' of git://git.kernel.dk/linux-block: (72 commits) block: return NULL in blk_alloc_queue() on error block: move bio_map_* to blk-map.c Revert "blkdev: check for valid request queue before issuing flush" block: simplify queue allocation bcache: pass the make_request methods to blk_queue_make_request null_blk: use blk_mq_init_queue_data block: add a blk_mq_init_queue_data helper block: move the ->devnode callback to struct block_device_operations block: move the part_stat* helpers from genhd.h to a new header block: move block layer internals out of include/linux/genhd.h block: move guard_bio_eod to bio.c block: unexport get_gendisk block: unexport disk_map_sector_rcu block: unexport disk_get_part block: mark part_in_flight and part_in_flight_rw static block: mark block_depr static block: factor out requeue handling from dispatch code block/diskstats: replace time_in_queue with sum of request times block/diskstats: accumulate all per-cpu counters in one pass block/diskstats: more accurate approximation of io_ticks for slow disks ...
2020-03-30Merge tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-blockLinus Torvalds16-1857/+2065
Pull libata updates from Jens Axboe: - Series from Bart, making the libata code smaller on PATA only setups. This is useful for smaller/embedded use cases, and will help us move some of those off drivers/ide. - Kill unused BPRINTK() (Hannes) - Add various Comet Lake ahci PCI ids (Kai-Heng, Mika) - Fix for a double scsi_host_put() in error handling (John) - Use scnprintf (Takashi) - Assign OF node to the SCSI device (Linus Walleij) * tag 'for-5.7/libata-2020-03-29' of git://git.kernel.dk/linux-block: (36 commits) ata: make "libata.force" kernel parameter optional ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c ata: start separating SATA specific code from libata-eh.c ata: move ata_sas_*() to libata-sata.c ata: start separating SATA specific code from libata-scsi.c ata: move sata_deb_timing_*() to libata-sata.c ata: move ata_qc_complete_multiple() to libata-sata.c ata: move sata_link_hardreset() to libata-sata.c ata: move sata_link_{debounce,resume}() to libata-sata.c ata: move *sata_set_spd*() to libata-sata.c ata: move sata_scr_*() to libata-sata.c ata: start separating SATA specific code from libata-core.c ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() ata: separate PATA timings code from libata-core.c ata: fix CodingStyle issues in PATA timings code ata: remove EXPORT_SYMBOL_GPL()s not used by modules ata: move EXPORT_SYMBOL_GPL()s close to exported code ata: optimize ata_scsi_rbuf[] size ...
2020-03-30Merge tag 'i3c/for-5.7' of ↵Linus Torvalds6-33/+75
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Boris Brezillon: - Fix driver auto-probing related issues - Stop using the deprecated i2c_new_device() function - Replace zero-length array with flexible-array member * tag 'i3c/for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: convert to use i2c_new_client_device() i3c: master: Replace zero-length array with flexible-array member i3c: Simplify i3c_device_match_id() i3c: Generate aliases for i3c modules i3c: Add a modalias sysfs attribute i3c: Fix MODALIAS uevents i3c: master: no need to iterate master device twice
2020-03-30Merge tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds14-23/+43
Pull tpm updates from Jarkko Sakkinen: "tpmdd updates for Linux v5.7" * tag 'tpmdd-next-20200316' of git://git.infradead.org/users/jjs/linux-tpmdd: KEYS: reaching the keys quotas correctly tpm: ibmvtpm: Add support for TPM2 tpm: ibmvtpm: Wait for buffer to be set before proceeding tpm: of: Handle IBM,vtpm20 case when getting log parameters MAINTAINERS: adjust to trusted keys subsystem creation tpm: tpm_tis_spi_cr50: use new structure for SPI transfer delays tpm_tis_spi: use new 'delay' structure for SPI transfer delays tpm: tpm2_bios_measurements_next should increase position index tpm: tpm1_bios_measurements_next should increase position index tpm: Don't make log failures fatal
2020-03-30Merge branches 'acpi-ec', 'acpi-fan' and 'acpi-pci'Rafael J. Wysocki4-193/+143
* acpi-ec: ACPI: EC: Eliminate EC_FLAGS_QUERY_HANDSHAKE ACPI: EC: Do not clear boot_ec_is_ecdt in acpi_ec_add() ACPI: EC: Simplify acpi_ec_ecdt_start() and acpi_ec_init() ACPI: EC: Consolidate event handler installation code ACPI: EC: Use fast path in acpi_ec_add() for DSDT boot EC ACPI: EC: Simplify acpi_ec_add() ACPI: EC: Drop AE_NOT_FOUND special case from ec_install_handlers() ACPI: EC: Avoid passing redundant argument to functions ACPI: EC: Avoid printing confusing messages in acpi_ec_setup() * acpi-fan: ACPI: fan: Use scnprintf() for avoiding potential buffer overflow * acpi-pci: ACPI: PCI: Use scnprintf() for avoiding potential buffer overflow
2020-03-30Merge branches 'acpi-button', 'acpi-battery', 'acpi-osl', 'acpi-video' and ↵Rafael J. Wysocki11-44/+111
'acpi-misc' * acpi-button: ACPI: Add new tiny-power-button driver to directly signal init ACPI: button: move HIDs to acpi/button.h * acpi-battery: ACPI / battery: Cleanup Lenovo Ideapad Miix 320 DMI table entry ACPI / AC: Cleanup DMI quirk table * acpi-osl: ACPI: OSL: Add missing __acquires/__releases annotations * acpi-video: ACPI: video: remove redundant assignments to variable result * acpi-misc: ACPI: list_for_each_safe() -> list_for_each_entry_safe()
2020-03-30Merge branch 'acpica'Rafael J. Wysocki10-19/+29
* acpica: ACPICA: Update version to 20200214 ACPICA: Fix a couple of typos ACPICA: use acpi_size instead of u32 for prefix_path_length ACPICA: cast length arguement to acpi_ns_build_normalized_path() as u32 ACPICA: cast the result of the pointer difference to u32 ACPICA: Table Manager: Update comments in a function header ACPICA: Enable sleep button on ACPI legacy wake ACPICA: Fix a comment "enable" fixed events -> "disable" all fixed events. ACPICA: ASL-ASL+ converter: make root file a parameter for cv_init_file_tree ACPICA: ASL-ASL+ converter: remove function parameters from cv_init_file_tree()
2020-03-30ACPICA: Update version to 20200214Bob Moore1-1/+1
ACPICA commit ac0c1b8a43a317702bb11e11fd5067a1c59e3002 Version 20200214 Link: https://github.com/acpica/acpica/commit/ac0c1b8a Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-30Merge branches 'pm-devfreq', 'powercap' and 'pm-docs'Rafael J. Wysocki19-552/+551
* pm-devfreq: PM / devfreq: Get rid of some doc warnings PM / devfreq: Fix handling dev_pm_qos_remove_request result PM / devfreq: Fix a typo in a comment PM / devfreq: Change to DEVFREQ_GOV_UPDATE_INTERVAL event name PM / devfreq: Remove unneeded extern keyword PM / devfreq: Use constant name of userspace governor * powercap: powercap: idle_inject: Replace zero-length array with flexible-array member * pm-docs: docs: cpu-freq: convert cpufreq-stats.txt to ReST docs: cpu-freq: convert cpu-drivers.txt to ReST docs: cpu-freq: convert core.txt to ReST docs: cpu-freq: convert index.txt to ReST docs: cpufreq: fix a broken reference Documentation: cpufreq: Move legacy driver documentation
2020-03-30Merge branches 'pm-core', 'pm-sleep', 'pm-acpi' and 'pm-domains'Rafael J. Wysocki16-87/+166
* pm-core: PM: runtime: Add pm_runtime_get_if_active() * pm-sleep: PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not there PM / hibernate: Remove unnecessary compat ioctl overrides PM: hibernate: fix docs for ioctls that return loff_t via pointer PM: sleep: wakeup: Use built-in RCU list checking PM: sleep: core: Use built-in RCU list checking * pm-acpi: ACPI: PM: s2idle: Refine active GPEs check ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE ACPI: PM: s2idle: Fix comment in acpi_s2idle_prepare_late() * pm-domains: cpuidle: psci: Split psci_dt_cpu_init_idle() PM / Domains: Allow no domain-idle-states DT property in genpd when parsing
2020-03-30Merge branch 'pm-cpufreq'Rafael J. Wysocki12-71/+273
* pm-cpufreq: cpufreq: intel_pstate: Simplify intel_pstate_cpu_init() cpufreq: qcom: Add support for krait based socs cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling cpufreq: Use scnprintf() for avoiding potential buffer overflow Documentation: intel_pstate: update links for references cpufreq: intel_pstate: Consolidate policy verification cpufreq: dt: Allow platform specific intermediate callbacks cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location cpufreq: imx6q: read OCOTP through nvmem for imx6q cpufreq: imx6q: fix error handling cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check cpufreq: ti-cpufreq: Add support for OPP_PLUS cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
2020-03-30Merge branch 'pm-cpuidle'Rafael J. Wysocki2-147/+167
* pm-cpuidle: cpuidle: haltpoll: allow force loading on hosts without the REALTIME hint intel_idle: Update copyright notice, known limitations and version intel_idle: Define CPUIDLE_FLAG_TLB_FLUSHED as BIT(16) intel_idle: Clean up kerneldoc comments for multiple functions intel_idle: Reorder declarations of static variables intel_idle: Annotate init time data structures intel_idle: Add __initdata annotations to init time variables intel_idle: Relocate definitions of cpuidle callbacks intel_idle: Clean up definitions of cpuidle callbacks intel_idle: Simplify LAPIC timer reliability checks
2020-03-30Merge branch 'pm-qos'Rafael J. Wysocki29-715/+407
* pm-qos: (30 commits) PM: QoS: annotate data races in pm_qos_*_value() Documentation: power: fix pm_qos_interface.rst format warning PM: QoS: Make CPU latency QoS depend on CONFIG_CPU_IDLE Documentation: PM: QoS: Update to reflect previous code changes PM: QoS: Update file information comments PM: QoS: Drop PM_QOS_CPU_DMA_LATENCY and rename related functions sound: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: tty: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: spi: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: net: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: mmc: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: media: Call cpu_latency_qos_*() instead of pm_qos_*() drivers: hsi: Call cpu_latency_qos_*() instead of pm_qos_*() drm: i915: Call cpu_latency_qos_*() instead of pm_qos_*() x86: platform: iosf_mbi: Call cpu_latency_qos_*() instead of pm_qos_*() cpuidle: Call cpu_latency_qos_limit() instead of pm_qos_request() PM: QoS: Add CPU latency QoS API wrappers PM: QoS: Adjust pm_qos_request() signature and reorder pm_qos.h PM: QoS: Simplify definitions of CPU latency QoS trace events ...
2020-03-30Merge remote-tracking branch 'regulator/for-next' into tmpMark Brown11-50/+435
2020-03-30media: venus: firmware: Ignore secure call error on first resumeStanimir Varbanov1-2/+8
With the latest cleanup in qcom scm driver the secure monitor call for setting the remote processor state returns EINVAL when it is called for the first time and after another scm call auth_and_reset. The error returned from scm call could be ignored because the state transition is already done in auth_and_reset. Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-30Merge branches 'edac-mc-cleanup', 'edac-misc', 'edac-drivers' and ↵Borislav Petkov14-378/+1054
'edac-urgent' into edac-updates-for-5.7 Signed-off-by: Borislav Petkov <bp@suse.de>
2020-03-30seccomp: Add missing compat_ioctl for notifySven Schnelle1-0/+1
Executing the seccomp_bpf testsuite under a 64-bit kernel with 32-bit userland (both s390 and x86) doesn't work because there's no compat_ioctl handler defined. Add the handler. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200310123332.42255-1-svens@linux.ibm.com Signed-off-by: Kees Cook <keescook@chromium.org>
2020-03-30Linux 5.6v5.6Linus Torvalds1-1/+1
2020-03-29Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-45/+82
Merge vm fixes from Andrew Morton: "5 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/sparse: fix kernel crash with pfn_section_valid check mm: fork: fix kernel_stack memcg stats for various stack implementations hugetlb_cgroup: fix illegal access to memory drivers/base/memory.c: indicate all memory blocks as removable mm/swapfile.c: move inode_lock out of claim_swapfile
2020-03-29Merge tag 'timers-urgent-2020-03-29' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix for the Hyper-V clocksource driver to make sched clock actually return nanoseconds and not the virtual clock value which increments at 10e7 HZ (100ns)" * tag 'timers-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/hyper-v: Make sched clock return nanoseconds correctly
2020-03-29Merge tag 'irq-urgent-2020-03-29' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Thomas Gleixner: "A single bugfix to prevent reference leaks in irq affinity notifiers" * tag 'irq-urgent-2020-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix reference leaks on irq affinity notifiers
2020-03-29mm/sparse: fix kernel crash with pfn_section_valid checkAneesh Kumar K.V1-0/+6
Fix the crash like this: BUG: Kernel NULL pointer dereference on read at 0x00000000 Faulting instruction address: 0xc000000000c3447c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries CPU: 11 PID: 7519 Comm: lt-ndctl Not tainted 5.6.0-rc7-autotest #1 ... NIP [c000000000c3447c] vmemmap_populated+0x98/0xc0 LR [c000000000088354] vmemmap_free+0x144/0x320 Call Trace: section_deactivate+0x220/0x240 __remove_pages+0x118/0x170 arch_remove_memory+0x3c/0x150 memunmap_pages+0x1cc/0x2f0 devm_action_release+0x30/0x50 release_nodes+0x2f8/0x3e0 device_release_driver_internal+0x168/0x270 unbind_store+0x130/0x170 drv_attr_store+0x44/0x60 sysfs_kf_write+0x68/0x80 kernfs_fop_write+0x100/0x290 __vfs_write+0x3c/0x70 vfs_write+0xcc/0x240 ksys_write+0x7c/0x140 system_call+0x5c/0x68 The crash is due to NULL dereference at test_bit(idx, ms->usage->subsection_map); due to ms->usage = NULL in pfn_section_valid() With commit d41e2f3bd546 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") section_mem_map is set to NULL after depopulate_section_mem(). This was done so that pfn_page() can work correctly with kernel config that disables SPARSEMEM_VMEMMAP. With that config pfn_to_page does __section_mem_map_addr(__sec) + __pfn; where static inline struct page *__section_mem_map_addr(struct mem_section *section) { unsigned long map = section->section_mem_map; map &= SECTION_MAP_MASK; return (struct page *)map; } Now with SPASEMEM_VMEMAP enabled, mem_section->usage->subsection_map is used to check the pfn validity (pfn_valid()). Since section_deactivate release mem_section->usage if a section is fully deactivated, pfn_valid() check after a subsection_deactivate cause a kernel crash. static inline int pfn_valid(unsigned long pfn) { ... return early_section(ms) || pfn_section_valid(ms, pfn); } where static inline int pfn_section_valid(struct mem_section *ms, unsigned long pfn) { int idx = subsection_map_index(pfn); return test_bit(idx, ms->usage->subsection_map); } Avoid this by clearing SECTION_HAS_MEM_MAP when mem_section->usage is freed. For architectures like ppc64 where large pages are used for vmmemap mapping (16MB), a specific vmemmap mapping can cover multiple sections. Hence before a vmemmap mapping page can be freed, the kernel needs to make sure there are no valid sections within that mapping. Clearing the section valid bit before depopulate_section_memap enables this. [aneesh.kumar@linux.ibm.com: add comment] Link: http://lkml.kernel.org/r/20200326133235.343616-1-aneesh.kumar@linux.ibm.comLink: http://lkml.kernel.org/r/20200325031914.107660-1-aneesh.kumar@linux.ibm.com Fixes: d41e2f3bd546 ("mm/hotplug: fix hot remove failure in SPARSEMEM|!VMEMMAP case") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Reviewed-by: Baoquan He <bhe@redhat.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Mike Rapoport <rppt@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29mm: fork: fix kernel_stack memcg stats for various stack implementationsRoman Gushchin3-2/+52
Depending on CONFIG_VMAP_STACK and the THREAD_SIZE / PAGE_SIZE ratio the space for task stacks can be allocated using __vmalloc_node_range(), alloc_pages_node() and kmem_cache_alloc_node(). In the first and the second cases page->mem_cgroup pointer is set, but in the third it's not: memcg membership of a slab page should be determined using the memcg_from_slab_page() function, which looks at page->slab_cache->memcg_params.memcg . In this case, using mod_memcg_page_state() (as in account_kernel_stack()) is incorrect: page->mem_cgroup pointer is NULL even for pages charged to a non-root memory cgroup. It can lead to kernel_stack per-memcg counters permanently showing 0 on some architectures (depending on the configuration). In order to fix it, let's introduce a mod_memcg_obj_state() helper, which takes a pointer to a kernel object as a first argument, uses mem_cgroup_from_obj() to get a RCU-protected memcg pointer and calls mod_memcg_state(). It allows to handle all possible configurations (CONFIG_VMAP_STACK and various THREAD_SIZE/PAGE_SIZE values) without spilling any memcg/kmem specifics into fork.c . Note: This is a special version of the patch created for stable backports. It contains code from the following two patches: - mm: memcg/slab: introduce mem_cgroup_from_obj() - mm: fork: fix kernel_stack memcg stats for various stack implementations [guro@fb.com: introduce mem_cgroup_from_obj()] Link: http://lkml.kernel.org/r/20200324004221.GA36662@carbon.dhcp.thefacebook.com Fixes: 4d96ba353075 ("mm: memcg/slab: stop setting page->mem_cgroup pointer for slab pages") Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200303233550.251375-1-guro@fb.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29hugetlb_cgroup: fix illegal access to memoryMina Almasry1-2/+1
This appears to be a mistake in commit faced7e0806cf ("mm: hugetlb controller for cgroups v2"). Essentially that commit does a hugetlb_cgroup_from_counter assuming that page_counter_try_charge has initialized counter. But if that has failed then it seems will not initialize counter, so hugetlb_cgroup_from_counter(counter) ends up pointing to random memory, causing kasan to complain. The solution is to simply use 'h_cg', instead of hugetlb_cgroup_from_counter(counter), since that is a reference to the hugetlb_cgroup anyway. After this change kasan ceases to complain. Fixes: faced7e0806cf ("mm: hugetlb controller for cgroups v2") Reported-by: syzbot+cac0c4e204952cf449b1@syzkaller.appspotmail.com Signed-off-by: Mina Almasry <almasrymina@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Giuseppe Scrivano <gscrivan@redhat.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Rientjes <rientjes@google.com> Link: http://lkml.kernel.org/r/20200313223920.124230-1-almasrymina@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29drivers/base/memory.c: indicate all memory blocks as removableDavid Hildenbrand1-20/+3
We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9fd813 ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29mm/swapfile.c: move inode_lock out of claim_swapfileNaohiro Aota1-21/+20
claim_swapfile() currently keeps the inode locked when it is successful, or the file is already swapfile (with -EBUSY). And, on the other error cases, it does not lock the inode. This inconsistency of the lock state and return value is quite confusing and actually causing a bad unlock balance as below in the "bad_swap" section of __do_sys_swapon(). This commit fixes this issue by moving the inode_lock() and IS_SWAPFILE check out of claim_swapfile(). The inode is unlocked in "bad_swap_unlock_inode" section, so that the inode is ensured to be unlocked at "bad_swap". Thus, error handling codes after the locking now jumps to "bad_swap_unlock_inode" instead of "bad_swap". ===================================== WARNING: bad unlock balance detected! 5.5.0-rc7+ #176 Not tainted ------------------------------------- swapon/4294 is trying to release lock (&sb->s_type->i_mutex_key) at: __do_sys_swapon+0x94b/0x3550 but there are no more locks to release! other info that might help us debug this: no locks held by swapon/4294. stack backtrace: CPU: 5 PID: 4294 Comm: swapon Not tainted 5.5.0-rc7-BTRFS-ZNS+ #176 Hardware name: ASUS All Series/H87-PRO, BIOS 2102 07/29/2014 Call Trace: dump_stack+0xa1/0xea print_unlock_imbalance_bug.cold+0x114/0x123 lock_release+0x562/0xed0 up_write+0x2d/0x490 __do_sys_swapon+0x94b/0x3550 __x64_sys_swapon+0x54/0x80 do_syscall_64+0xa4/0x4b0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f15da0a0dc7 Fixes: 1638045c3677 ("mm: set S_SWAPFILE on blockdev swap devices") Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qais Youef <qais.yousef@arm.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200206090132.154869-1-naohiro.aota@wdc.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-03-29block: return NULL in blk_alloc_queue() on errorChaitanya Kulkarni1-1/+1
This patch fixes follwoing warning: block/blk-core.c: In function ‘blk_alloc_queue’: block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion] return -EINVAL; Fixes: 3d745ea5b095a ("block: simplify queue allocation") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-29efi/libstub/arm: Fix spurious message that an initrd was loadedArd Biesheuvel1-1/+1
Commit: ec93fc371f014a6f ("efi/libstub: Add support for loading the initrd from a device path") added a diagnostic print to the ARM version of the EFI stub that reports whether an initrd has been loaded that was passed via the command line using initrd=. However, it failed to take into account that, for historical reasons, the file loading routines return EFI_SUCCESS when no file was found, and the only way to decide whether a file was loaded is to inspect the 'size' argument that is passed by reference. So let's inspect this returned size, to prevent the print from being emitted even if no initrd was loaded at all. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-efi@vger.kernel.org