Age | Commit message (Collapse) | Author | Files | Lines |
|
[ Upstream commit a069f79bfa6ec1ea0744981ea8425c8a25322579 ]
Call devm_request_irq() before registering the async notifier, as otherwise
it would be possible to use the device before the interrupts could be
delivered to the driver.
Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5d1a7493343cc00d9019880b686e4e0a0f649531 ]
As documented in the description of the transfer() function of
"struct drm_dp_aux", the transfer() function can be called at any time
regardless of the state of the DP port. Specifically if the kernel has
the DP AUX character device enabled and userspace accesses
"/dev/drm_dp_auxN" directly then the AUX transfer function will be
called regardless of whether a DP device is connected.
For eDP panels we have a special rule where we wait (with a 5 second
timeout) for HPD to go high. This rule was important before all panels
drivers were converted to call wait_hpd_asserted() and actually can be
removed in a future commit.
For external DP devices we never checked for HPD. That means that
trying to access the DP AUX character device (AKA `hexdump -C
/dev/drm_dp_auxN`) would very, very slowly timeout. Specifically on my
system:
$ time hexdump -C /dev/drm_dp_aux0
hexdump: /dev/drm_dp_aux0: Connection timed out
real 0m8.200s
We want access to the drm_dp_auxN character device to fail faster than
8 seconds when no DP cable is plugged in.
Let's add a test to make transfers fail right away if a device isn't
plugged in. Rather than testing the HPD line directly, we have the
dp_display module tell us when AUX transfers should be enabled so we
can handle cases where HPD is signaled out of band like with Type C.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/583127/
Link: https://lore.kernel.org/r/20240315143621.v2.1.I16aff881c9fe82b5e0fc06ca312da017aa7b5b3e@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 22578178e5dd6d3aa4490879df8b6c2977d980be ]
Both dp_link_adjust_levels() and dp_ctrl_update_vx_px() limit swing and
pre-emphasis to 2, while the real maximum value for the sum of the
voltage swing and pre-emphasis is 3. Fix the DP code to remove this
limitation.
Fixes: c943b4948b58 ("drm/msm/dp: add displayPort driver support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/577006/
Link: https://lore.kernel.org/r/20240203-dp-swing-3-v1-1-6545e1706196@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 290680c2da8061e410bcaec4b21584ed951479af ]
Multiple WMI events can be received concurrently, so multiple instances
of xiaomi_wmi_notify() can be active at the same time. Since the input
device is shared between those handlers, the key input sequence can be
disturbed.
Fix this by protecting the key input sequence with a mutex.
Compile-tested only.
Fixes: edb73f4f0247 ("platform/x86: wmi: add Xiaomi WMI key driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20240402143059.8456-2-W_Armin@gmx.de
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 935a92a1c400285545198ca2800a4c6c519c650a ]
In cdns_mhdp_atomic_enable(), the return value of drm_mode_duplicate() is
assigned to mhdp_state->current_mode, and there is a dereference of it in
drm_mode_set_name(), which will lead to a NULL pointer dereference on
failure of drm_mode_duplicate().
Fix this bug add a check of mhdp_state->current_mode.
Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408125810.21899-1-amishin@t-argos.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1820e16a3019b6258e6009d34432946a6ddd0a90 ]
Increase the size of led_names so it can fit any valid v4l2 device name.
Fixes:
drivers/media/radio/radio-shark2.c:197:17: warning: ‘%s’ directive output may be truncated writing up to 35 bytes into a region of size 32 [-Wformat-truncation=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1a742c6010d136cb6c441a0f1dd2bfbfae3c4df2 ]
clang-19 warns about mixing two enum types here:
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-core.c:216:18: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
drivers/media/platform/renesas/rcar-vin/rcar-vin.h:296:12: error: conditional expression between different enumeration types ('enum rvin_csi_id' and 'enum rvin_isp_id') [-Werror,-Wenum-compare-conditional]
This one is intentional, and there is already a cast to work around another
warning, so address this by adding another cast.
Fixes: 406bb586dec0 ("media: rcar-vin: Add r8a779a0 support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 810dd605e917c716f6f83e6cd8ea23d9155d32a2 ]
Need to remove links when unregistering devices.
Fixes: ac7da4a73b10 ("media: staging: media: starfive: camss: Register devices")
Signed-off-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9bb1fd7eddcab2d28cfc11eb20f1029154dac718 ]
The return value of dvb_ca_en50221_init() is not checked here that may
cause undefined behavior in case of nonzero value return.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 25aee3debe04 ("[media] Rename media/dvb as media/pci")
Signed-off-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41bf4525fadb3d8df3860420d6ac9025c51a3bac ]
While PROBE_MOD_UUID is always part of the base AudioDSP firmware
manifest, from maintenance point of view it is better to check the
result.
Fixes: dab8d000e25c ("ASoC: Intel: avs: Add data probing requests")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c7e832cabe635df47c2bf6df7801e97bf3045b1e ]
While stream_tag for CLDMA on SKL-based platforms is always 1, function
hda_cldma_setup() uses AZX_SD_CTL_STRM() macro which does:
stream_tag << 20
what combined with stream_tag type of 'unsigned int' generates a
potential overflow issue. Update the field type to fix that.
Fixes: 45864e49a05a ("ASoC: Intel: avs: Implement CLDMA transfer")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9d2e26f31c7cc3fa495c423af9b4902ec0dc7be3 ]
The ASRC module configuration consists of several reserved fields. Zero
them out when initializing the module to avoid sending invalid data.
Fixes: 274d79e51875 ("ASoC: Intel: avs: Configure modules according to their type")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 680507581e025d16a0b6d3782603ca8c598fbe2b ]
Revert changes from commit b87b8f43afd5 ("ASoC: Intel: avs: Drop
superfluous stream decoupling") to restore working streaming during S3.
Fixes: b87b8f43afd5 ("ASoC: Intel: avs: Drop superfluous stream decoupling")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240405090929.1184068-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
without nsdelegate
[ Upstream commit 4793cb599b1bdc3d356f0374c2c99ffe890ae876 ]
The test case test_cgcore_lesser_ns_open only tasks effect when cgroup2
is mounted with "nsdelegate" mount option. If it misses this option, or
is remounted without "nsdelegate", the test case will fail. For example,
running bpf/test_cgroup_storage first, and then run cgroup/test_core will
fail on test_cgcore_lesser_ns_open. Skip it if "nsdelegate" is not
detected in cgroup2 mount options.
Fixes: bf35a7879f1d ("selftests: cgroup: Test open-time cgroup namespace usage for migration checks")
Signed-off-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 688cf598665851b9e8cb5083ff1d208ce43d10ff ]
Building with W=1 shows that a couple of variables in this driver are only
used in certain configurations:
drivers/video/fbdev/sis/init301.c:239:28: error: 'SiS_Part2CLVX_6' defined but not used [-Werror=unused-const-variable=]
239 | static const unsigned char SiS_Part2CLVX_6[] = { /* 1080i */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:230:28: error: 'SiS_Part2CLVX_5' defined but not used [-Werror=unused-const-variable=]
230 | static const unsigned char SiS_Part2CLVX_5[] = { /* 750p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:211:28: error: 'SiS_Part2CLVX_4' defined but not used [-Werror=unused-const-variable=]
211 | static const unsigned char SiS_Part2CLVX_4[] = { /* PAL */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:192:28: error: 'SiS_Part2CLVX_3' defined but not used [-Werror=unused-const-variable=]
192 | static const unsigned char SiS_Part2CLVX_3[] = { /* NTSC, 525i, 525p */
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:184:28: error: 'SiS_Part2CLVX_2' defined but not used [-Werror=unused-const-variable=]
184 | static const unsigned char SiS_Part2CLVX_2[] = {
| ^~~~~~~~~~~~~~~
drivers/video/fbdev/sis/init301.c:176:28: error: 'SiS_Part2CLVX_1' defined but not used [-Werror=unused-const-variable=]
176 | static const unsigned char SiS_Part2CLVX_1[] = {
| ^~~~~~~~~~~~~~~
This started showing up after the definitions were moved into the
source file from the header, which was not flagged by the compiler.
Move the definition into the appropriate #ifdef block that already
exists next to them.
Fixes: 5908986ef348 ("video: fbdev: sis: avoid mismatched prototypes")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b1c1c47e76f0161bda2b1ac2e86a219fe70244f ]
With the corrected rom_status_reg values we can now add a check for target
boot status for firmware booting.
With the check now we can identify failed firmware boots (IMR boots) and
we can use the fallback to purge boot the DSP.
Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26187f44aabdf3df7609b7c78724a059c230a2ad ]
In case of error during the firmware boot we need to disable the interrupts
which were enabled as part of the boot sequence.
Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b852574c671a9983dd51c81582c8c5085f3dc382 ]
ACE2 architecture changed the place where the ROM updates the status code
from the shared SRAM window (and HFFLGP1QW0 in ACE1) to HFDSC register for
the status and HFDEC (HFDSC + 4) for the error code.
The rom_status_reg is not used on LNL because it was wrongly assigned based
on older platform convention (SRAM window) and it was giving inconsistent
readings.
Add new header file for lnl specific register definitions.
Fixes: 64a63d9914a5 ("ASoC: SOF: Intel: LNL: Add support for Lunarlake platform")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f1b820dc3c65b6883da3130ba3b8624dcbf87db ]
ACE1 architecture changed the place where the ROM updates the status code
from the shared SRAM window to HFFLGP1QW0 register for the status and
HFFLGP1QW0 + 4 for the error code.
The rom_status_reg is not used on MTL because it was wrongly assigned based
on older platform convention (SRAM window) and it was giving inconsistent
readings.
Fixes: 064520e8aeaa ("ASoC: SOF: Intel: Add support for MeteorLake (MTL)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://msgid.link/r/20240403105210.17949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01acaf3aa75e1641442cc23d8fe0a7bb4226efb1 ]
vmpic_msi_feature is only used conditionally, which triggers a rare
-Werror=unused-const-variable= warning with gcc:
arch/powerpc/sysdev/fsl_msi.c:567:37: error: 'vmpic_msi_feature' defined but not used [-Werror=unused-const-variable=]
567 | static const struct fsl_msi_feature vmpic_msi_feature =
Hide this one in the same #ifdef as the reference so we can turn on
the warning by default.
Fixes: 305bcf26128e ("powerpc/fsl-soc: use CONFIG_EPAPR_PARAVIRT for hcalls")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240403080702.3509288-2-arnd@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 831045513c8a2ef14c3cf39b33d1ccedf588c4a8 ]
The existing code derives the channel map used to program the HDaudio
link DMA from the hw_params, but that is not quite right in the case
of aggregation. The code in soc-pcm.c splits the hw_params depending
on the codec_ch_map, and we need to reconstruct the channel-map to
insert the data in the right places.
This issue is seen only on amplifier feedback capture where the data
from the second amplifier was replaced by that of the first amplifier.
Note that the loop iterator of the macro for_each_rtd_cpu_dais() is
reused in a following loop. This is different to all existing usages
of that macro, hence the use of a boolean flag to avoid an access to
an uninitialized variable.
Fixes: 2960ee5c4814 ("ASoC: SOF: Intel: hda-dai: add helpers for SoundWire callbacks")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01a2c5123e27b3c4685bf2fc4c2e879f6e0c7b33 ]
In the case where `conn_routes` is true we allocate an extra slot in
the `ddp_comp` array but mtk_drm_crtc_create() never seemed to
initialize it in the test case I ran. For me, this caused a later
crash when we looped through the array in mtk_drm_crtc_mode_valid().
This showed up for me when I booted with `slub_debug=FZPUA` which
poisons the memory initially. Without `slub_debug` I couldn't
reproduce, presumably because the later code handles the value being
NULL and in most cases (not guaranteed in all cases) the memory the
allocator returned started out as 0.
It really doesn't hurt to initialize the array with devm_kcalloc()
since the array is small and the overhead of initting a handful of
elements to 0 is small. In general initting memory to zero is a safer
practice and usually it's suggested to only use the non-initting alloc
functions if you really need to.
Let's switch the function to use an allocation function that zeros the
memory. For me, this avoids the crash.
Fixes: 01389b324c97 ("drm/mediatek: Add connector dynamic selection capability")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240328092248.1.I2e73c38c0f264ee2fa4a09cdd83994e37ba9f541@changeid/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e4350095e8ab2577ee05f8c3b044e661b5af9a0 ]
Add a check to mtk_drm_gem_init if we attempt to allocate a GEM object
of 0 bytes. Currently, no such check exists and the kernel will panic if
a userspace application attempts to allocate a 0x0 GBM buffer.
Tested by attempting to allocate a 0x0 GBM buffer on an MT8188 and
verifying that we now return EINVAL.
Fixes: 119f5173628a ("drm/mediatek: Add DRM Driver for Mediatek SoC MT8173.")
Signed-off-by: Justin Green <greenjustin@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240307180051.4104425-1-greenjustin@chromium.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bfbc68e4d8695497f858a45a142665e22a512ea3 ]
Playing 4K media with 59.94 fractional rate (typically VP9) causes the screen to lose
sync with the following error reported in the system log:
[ 89.610280] Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
Change the fractional rate calculation to stop DIV_ROUND_CLOSEST rounding down which
results in vclk freq failing to match correctly.
Fixes: e5fab2ec9ca4 ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240109230704.4120561-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240109230704.4120561-1-christianshewitt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ea60ab95723f5738e7737b56dda95e6feefa5b50 ]
In kirkwood_dma_hw_params() mv_mbus_dram_info() returns NULL if
CONFIG_PLAT_ORION macro is not defined.
Fix this bug by adding NULL check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: bb6a40fc5a83 ("ASoC: kirkwood: Fix reference to PCM buffer address")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Link: https://msgid.link/r/20240328173337.21406-1-amishin@t-argos.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26c8cfb9d1e4b252336d23dd5127a8cbed414a32 ]
The name of the overlay does not fit into the fixed-length field:
drivers/video/fbdev/sh_mobile_lcdcfb.c:1577:2: error: 'snprintf' will always be truncated; specified size is 16, but format string expands to at least 25
Make it short enough by changing the string.
Fixes: c5deac3c9b22 ("fbdev: sh_mobile_lcdc: Implement overlays support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 55679cc22e60e8ec23b2340248389022798416cd ]
The init sequence specifies the 0x11 and 0x29 dsi commands, which are
the exit-sleep and display-on commands.
In the actual prepare step the driver already uses the appropriate
function calls for those, so drop the duplicates.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-2-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80cc8c0d09e6bab3bd016ddaccd0570cadbe1891 ]
Similar to other variants, the LTK050H3148W wants to run in video mode
when displaying data. So far only the Synopsis DSI driver was using this
panel and it is always switching to video mode, independent of this flag
being set.
Other DSI drivers might handle this differently, so add the flag.
Fixes: e5f9d543419c ("drm/panel: ltk050h3146w: add support for Leadtek LTK050H3148W-CTA6 variant")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240320131232.327196-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5f39231888c63f0a7708abc86b51b847476379d8 ]
MediaTek sound card drivers are checking whether a DAI link is present
and used on a board to assign the correct parameters and this is done
by checking the codec DAI names at probe time.
If no real codec is present, assign the dummy codec to the DAI link
to avoid NULL pointer during string comparison.
Fixes: 4302187d955f ("ASoC: mediatek: common: add soundcard driver common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240313110147.1267793-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 07b9d0144fff9af08b8dcd0ae134510bfd539e42 ]
The array size calculation in pvr_vm_mips_fini() appears to be incorrect based on
taking the size of the pointer rather than the size of the array, which manifests
as a warning about signed integer overflow:
In file included from include/linux/kernel.h:16,
from drivers/gpu/drm/imagination/pvr_rogue_fwif.h:10,
from drivers/gpu/drm/imagination/pvr_ccb.h:7,
from drivers/gpu/drm/imagination/pvr_device.h:7,
from drivers/gpu/drm/imagination/pvr_vm_mips.c:4:
drivers/gpu/drm/imagination/pvr_vm_mips.c: In function 'pvr_vm_mips_fini':
include/linux/array_size.h:11:25: error: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551615' to '-1' [-Werror=overflow]
11 | #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))
| ^
drivers/gpu/drm/imagination/pvr_vm_mips.c:106:24: note: in expansion of macro 'ARRAY_SIZE'
106 | for (page_nr = ARRAY_SIZE(mips_data->pt_pages) - 1; page_nr >= 0; page_nr--) {
| ^~~~~~~~~~
Just use the number of array elements directly here, and in the corresponding
init function for consistency.
Fixes: 927f3e0253c1 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Reviewed-by: Donald Robson <donald.robson@imgtec.com>
Link: https://lore.kernel.org/lkml/9df9e4f87727399928c068dbbf614c9895ae15f9.camel@imgtec.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6819db94e1cd3ce24a432f3616cd563ed0c4eaba ]
The function hynix_nand_rr_init() should probably return an error code.
Judging by the usage, it seems that the return code is passed up
the call stack.
Right now, it always returns 0 and the function hynix_nand_cleanup()
in hynix_nand_init() has never been called.
Found by RASU JSC and Linux Verification Center (linuxtesting.org)
Fixes: 626994e07480 ("mtd: nand: hynix: Add read-retry support for 1x nm MLC NANDs")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240313102721.1991299-1-korotkov.maxim.s@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
mtd_otp_nvmem_add()
[ Upstream commit d44f0bbbd8d182debcce88bda55b05269f3d33d6 ]
Jump to the error reporting code in mtd_otp_nvmem_add() if the
mtd_otp_size() call fails. Without this fix, the error is not logged.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Fixes: 4b361cfa8624 ("mtd: core: add OTP nvmem provider support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240313173425.1325790-2-aapo.vienamo@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6719d48ba6329536c459dcee5a571e535687094 ]
A copy-paste from intel/boards/skl_nau88l25_ssm4567.c made the avs's
equivalent disable route checks as well. Such behavior is not desired.
Fixes: 69ea14efe99b ("ASoC: Intel: avs: Add ssm4567 machine board")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0cb3b7fd530b8c107443218ce6db5cb6e7b5dbe1 ]
Topology files that are propagated to the world and utilized by the
skylake-driver carry shortcomings in their SectionGraphs.
Since commit daa480bde6b3 ("ASoC: soc-core: tidyup for
snd_soc_dapm_add_routes()") route checks are no longer permissive. Probe
failures for Intel boards have been partially addressed by commit
a22ae72b86a4 ("ASoC: soc-core: disable route checks for legacy devices")
and its follow up but only skl_nau88l25_ssm4567.c is patched. Fix the
problem for the rest of the boards.
Link: https://lore.kernel.org/all/20200309192744.18380-1-pierre-louis.bossart@linux.intel.com/
Fixes: daa480bde6b3 ("ASoC: soc-core: tidyup for snd_soc_dapm_add_routes()")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://msgid.link/r/20240308090502.2136760-2-cezary.rojewski@intel.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a43dbeaba81eb645a12a004c67722c632ed0d94b ]
pipe_ctx->plane_res.mpcc_inst is of a type that can only hold values
between 0 and 255, so it's always greater than or equal to 0.
Thus the condition 'pipe_ctx->plane_res.mpcc_inst >= 0' was always true
and has been removed.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn35/dcn35_hwseq.c:1023 dcn35_calc_blocks_to_gate() warn: always true condition '(pipe_ctx->plane_res.mpcc_inst >= 0) => (0-255 >= 0)'
Fixes: 6f8b7565cca4 ("drm/amd/display: Add DCN35 HWSEQ")
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
function
[ Upstream commit 63ae548f1054a0b71678d0349c7dc9628ddd42ca ]
Fixes index out of bounds issue in the color transformation function.
The issue could occur when the index 'i' exceeds the number of transfer
function points (TRANSFER_FUNC_POINTS).
The fix adds a check to ensure 'i' is within bounds before accessing the
transfer function points. If 'i' is out of bounds, an error message is
logged and the function returns false to indicate an error.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max
Fixes: b629596072e5 ("drm/amd/display: Build unity lut for shaper")
Cc: Vitaly Prosyak <vitaly.prosyak@amd.com>
Cc: Charlene Liu <Charlene.Liu@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e842d55bad7794823a50f24fd645b58f2ef93ab ]
When the atna33xc20 driver was first written the resume code never
returned an error. If there was a problem waiting for HPD it just
printed a warning and moved on. This changed in response to review
feedback [1] on a future patch but I accidentally didn't account for
rolling back the regulator enable in the error cases. Do so now.
[1] https://lore.kernel.org/all/5f3cf3a6-1cc2-63e4-f76b-4ee686764705@linaro.org/
Fixes: 3b5765df375c ("drm/panel: atna33xc20: Take advantage of wait_hpd_asserted() in struct drm_dp_aux")
Acked-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313-homestarpanel-regulator-v1-1-b8e3a336da12@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8df1ddb5bf11ab820ad991e164dab82c0960add9 ]
If an eDP panel is not powered on then any attempts to talk to it over
the DP AUX channel will timeout. Unfortunately these attempts may be
quite slow. Userspace can initiate these attempts either via a
/dev/drm_dp_auxN device or via the created i2c device.
Making the DP AUX drivers timeout faster is a difficult proposition.
In theory we could just poll the panel's HPD line in the AUX transfer
function and immediately return an error there. However, this is
easier said than done. For one thing, there's no hard requirement to
hook the HPD line up for eDP panels and it's OK to just delay a fixed
amount. For another thing, the HPD line may not be fast to probe. On
parade-ps8640 we need to wait for the bridge chip's firmware to boot
before we can get the HPD line and this is a slow process.
The fact that the transfers are taking so long to timeout is causing
real problems. The open source fwupd daemon sometimes scans DP busses
looking for devices whose firmware need updating. If it happens to
scan while a panel is turned off this scan can take a long time. The
fwupd daemon could try to be smarter and only scan when eDP panels are
turned on, but we can also improve the behavior in the kernel.
Let's let eDP panels drivers specify that a panel is turned off and
then modify the common AUX transfer code not to attempt a transfer in
this case.
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Eizan Miyamoto <eizan@chromium.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202141109.1.I24277520ac754ea538c9b14578edc94e1df11b48@changeid
Stable-dep-of: 5e842d55bad7 ("drm/panel: atna33xc20: Fix unbalanced regulator in the case HPD doesn't assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 172695f145fb4798ab605e8a73f6e87711930124 ]
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.
Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.
Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349a0 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c26ec799042a3888935d59b599f33e41efedf5f8 ]
When printk-indexing is enabled, each dev_printk() invocation emits a
pi_entry structure. This is even true when the dev_printk() is
protected by an always-false check, as is typically the case for debug
messages: while the actual code to print the message is optimized out by
the compiler, the pi_entry structure is still emitted.
Avoid emitting pi_entry structures for unavailable dev_printk() kernel
messages by:
1. Introducing a dev_no_printk() helper, mimicked after the existing
no_printk() helper, which calls _dev_printk() instead of
dev_printk(),
2. Replacing all "if (0) dev_printk(...)" constructs by calls to the
new helper.
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 957 KiB.
Fixes: ad7d61f159db7397 ("printk: index: Add indexing support to dev_printk")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/8583d54f1687c801c6cda8edddf2cf0344c6e883.1709127473.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8522f6b760ca588928eede740d5d69dd1e936b49 ]
When printk-indexing is enabled, each printk() invocation emits a
pi_entry structure, containing the format string and other information
related to its location in the kernel sources. This is even true for
no_printk(): while the actual code to print the message is optimized out
by the compiler due to the always-false check, the pi_entry structure is
still emitted.
As the main purpose of no_printk() is to provide a helper to maintain
printf()-style format checking when debugging is disabled, this leads to
the inclusion in the index of lots of printk formats that cannot be
emitted by the current kernel.
Fix this by switching no_printk() from printk() to _printk().
This reduces the size of an arm64 defconfig kernel with
CONFIG_PRINTK_INDEX=y by 576 KiB.
Fixes: 337015573718b161 ("printk: Userspace format indexing support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Chris Down <chris@chrisdown.name>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/56cf92edccffea970e1f40a075334dd6cf5bb2a4.1709127473.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 01c0cce88c5480cc2505b79330246ef12eda938f ]
Commit 95da53d63dcf ("drm/omapdrm: Use regular fbdev I/O helpers")
stopped console from updating for command mode displays because there is
no damage handling in fb_sys_write() unlike we had earlier in
drm_fb_helper_sys_write().
Let's fix the issue by adding FB_GEN_DEFAULT_DEFERRED_DMAMEM_OPS and
FB_DMAMEM_HELPERS_DEFERRED as suggested by Thomas. We cannot use the
FB_DEFAULT_DEFERRED_OPS as fb_deferred_io_mmap() won't work properly
for write-combine.
Fixes: 95da53d63dcf ("drm/omapdrm: Use regular fbdev I/O helpers")
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-3-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 632bac50544c0929ced9eed41e7d04c08adecbb0 ]
The framebuffer console stopped updating with commit f231af498c29
("drm/fb-helper: Disconnect damage worker from update logic").
Let's fix the issue by implementing fb_dirty similar to what was done
with commit 039a72ce7e57 ("drm/i915/fbdev: Implement fb_dirty for intel
custom fb helper").
Fixes: f231af498c29 ("drm/fb-helper: Disconnect damage worker from update logic")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228063540.4444-2-tony@atomide.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97252d0a4bfbb07079503d059f7522d305fe0f7a ]
I've recently been seeing some unexplained GSP errors on my RTX 6000 from
failed aux transactions:
[ 132.915867] nouveau 0000:1f:00.0: gsp: cli:0xc1d00002 obj:0x00730000
ctrl cmd:0x00731341 failed: 0x0000ffff
While the cause of these is not yet clear, these messages made me notice
that the aux transactions causing these transactions were succeeding - not
failing. As it turns out, this is because we're currently not returning the
correct variable when r535_dp_aux_xfer() hits an error - causing us to
never propagate GSP errors for failed aux transactions to userspace.
So, let's fix that.
Fixes: 4ae3a20102b2 ("nouveau/gsp: don't free ctrl messages on errors")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240315212104.776936-1-lyude@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2c71b711e7efc6478976233768bdbc3386e6dce ]
Volteer devices in the collabora lab are categorized under the
asus-cx9400-volteer device type. The majority of these units
has an Intel Core i5-1130G7 CPU, while some of them have a
Intel Core i7-1160G7 CPU instead. So due to this difference,
new device type template is added for the Intel Core i5-1130G7
and i7-1160G7 variants of the Acer Chromebook Spin 514 (CP514-2H)
volteer Chromebooks. So update the same in drm-ci.
https://gitlab.collabora.com/lava/lava/-/merge_requests/149
Fixes: 0119c894ab0d ("drm: Add initial ci/ subdirectory")
Reviewed-by: David Heidelberg <david.heidelberg@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240307021841.100561-1-vignesh.raman@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e18aeeda0b6905c333df5a0566b99f5c84426098 ]
For a given bridge pipeline if any bridge sets pre_enable_prev_first
flag then the pre_enable for the previous bridge will be called before
pre_enable of this bridge and opposite is done for post_disable.
These are the potential bridge flags to alter bridge init order in order
to satisfy the MIPI DSI host and downstream panel or bridge to function.
However the existing pre_enable_prev_first logic with associated bridge
ordering has broken for both pre_enable and post_disable calls.
[pre_enable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example, Bridge 4 and Bridge 5 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flag
on each iteration and assigned the previou bridge to limit pointer
if the bridge doesn't enable pre_enable_prev_first flags.
If control found Bridge 2 is pre_enable_prev_first then the iteration
looks for Bridge 3 and found it is not pre_enable_prev_first and assigns
it's previous Bridge 4 to limit pointer and calls pre_enable of Bridge 3
and Bridge 2 and assign iter pointer with limit which is Bridge 4.
Here is the actual problem, for the next iteration control look for
Bridge 5 instead of Bridge 4 has iter pointer in previous iteration
moved to Bridge 4 so this iteration skips the Bridge 4. The iteration
found Bridge 6 doesn't pre_enable_prev_first flags so the limit assigned
to Encoder. From next iteration Encoder skips as it is the last bridge
for reverse order pipeline.
So, the resulting pre_enable bridge order would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5.
This patch fixes this by assigning limit to next pointer instead of
previous bridge since the iteration always looks for bridge that does
NOT request prev so assigning next makes sure the last bridge on a
given iteration what exactly the limit bridge is.
So, the resulting pre_enable bridge order with fix would be,
- Panel, Bridge 1, Bridge 3, Bridge 2, Bridge 6, Bridge 5, Bridge 4,
Encoder.
[post_disable]
The altered bridge ordering has failed if two consecutive bridges on a
given pipeline enables the pre_enable_prev_first flag.
Example:
- Panel
- Bridge 1
- Bridge 2 pre_enable_prev_first
- Bridge 3
- Bridge 4 pre_enable_prev_first
- Bridge 5 pre_enable_prev_first
- Bridge 6
- Encoder
In this example Bridge 5 and Bridge 4 have pre_enable_prev_first.
The logic looks for a bridge which enabled pre_enable_prev_first flags
on each iteration and assigned the previou bridge to next and next to
limit pointer if the bridge does enable pre_enable_prev_first flag.
If control starts from Bridge 6 then it found next Bridge 5 is
pre_enable_prev_first and immediately the next assigned to previous
Bridge 6 and limit assignments to next Bridge 6 and call post_enable
of Bridge 6 even though the next consecutive Bridge 5 is enabled with
pre_enable_prev_first. This clearly misses the logic to find the state
of next conducive bridge as everytime the next and limit assigns
previous bridge if given bridge enabled pre_enable_prev_first.
So, the resulting post_disable bridge order would be,
- Encoder, Bridge 6, Bridge 5, Bridge 4, Bridge 3, Bridge 2, Bridge 1,
Panel.
This patch fixes this by assigning next with previou bridge only if the
bridge doesn't enable pre_enable_prev_first flag and the next further
assign it to limit. This way we can find the bridge that NOT requested
prev to disable last.
So, the resulting pre_enable bridge order with fix would be,
- Encoder, Bridge 4, Bridge 5, Bridge 6, Bridge 2, Bridge 3, Bridge 1,
Panel.
Validated the bridge init ordering by incorporating dummy bridges in
the sun6i-mipi-dsi pipeline
Fixes: 4fb912e5e190 ("drm/bridge: Introduce pre_enable_prev_first to alter bridge init order")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328170752.1102347-1-jagan@amarulasolutions.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e77f43d531af41e9ce299eab10dcae8fa5dbc293 ]
If hdev->le_num_of_adv_sets is set to 1 it means that only handle 0x00
can be used, but since the MGMT interface instances start from 1
(instance 0 means all instances in case of MGMT_OP_REMOVE_ADVERTISING)
the code needs to map the instance to handle otherwise users will not be
able to advertise as instance 1 would attempt to use handle 0x01.
Fixes: 1d0fac2c38ed ("Bluetooth: Use controller sets when available")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c4585edf708edb5277a3cc4b8581ccb833f3307d ]
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).
Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.
So, use the `DEFINE_FLEX()` helper for multiple on-stack definitions
of a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
Notice that, due to the use of `__counted_by()` in `struct
hci_cp_le_create_cis`, the for loop in function `hci_cs_le_create_cis()`
had to be modified. Once the index `i`, through which `cp->cis[i]` is
accessed, falls in the interval [0, cp->num_cis), `cp->num_cis` cannot
be decremented all the way down to zero while accessing `cp->cis[]`:
net/bluetooth/hci_event.c:4310:
4310 for (i = 0; cp->num_cis; cp->num_cis--, i++) {
...
4314 handle = __le16_to_cpu(cp->cis[i].cis_handle);
otherwise, only half (one iteration before `cp->num_cis == i`) or half
plus one (one iteration before `cp->num_cis < i`) of the items in the
array will be accessed before running into an out-of-bounds issue. So,
in order to avoid this, set `cp->num_cis` to zero just after the for
loop.
Also, make use of `aux_num_cis` variable to update `cmd->num_cis` after
a `list_for_each_entry_rcu()` loop.
With these changes, fix the following warnings:
net/bluetooth/hci_sync.c:1239:56: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1415:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:1731:51: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
net/bluetooth/hci_sync.c:6497:45: warning: structure containing a flexible
array member is not at the end of another structure
[-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d8e45f2929b94099913eb66c3ebb18b5063e9421 ]
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a292ba981324ec790eb671df1c64fae5c98c4b3d ]
Currently, XSK control path in ice driver calls directly
ice_vsi_cfg_txq() whereas we have ice_vsi_cfg_single_txq() for that
purpose. Use the latter from XSK side and make ice_vsi_cfg_txq() static.
ice_vsi_cfg_txq() resides in ice_base.c and is rather big, so to reduce
the code churn let us move the callers of it from ice_lib.c to
ice_base.c.
This change puts ice_qp_ena() on nice diet due to the checks and
operations that ice_vsi_cfg_single_{r,t}xq() do internally.
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-182 (-182)
Function old new delta
ice_xsk_pool_setup 2165 1983 -182
Total: Before=472597, After=472415, chg -0.04%
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: e77f43d531af ("Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|