summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-09peci: Add sysfs interface for PECI busIwona Winiarska6-2/+107
PECI devices may not be discoverable at the time when PECI controller is being added (e.g. BMC can boot up when the Host system is still in S5). Since we currently don't have the capabilities to figure out the Host system state inside the PECI subsystem itself, we have to rely on userspace to do it for us. In the future, PECI subsystem may be expanded with mechanisms that allow us to avoid depending on userspace interaction (e.g. CPU presence could be detected using GPIO, and the information on whether it's discoverable could be obtained over IPMI). Unfortunately, those methods may ultimately not be available (support will vary from platform to platform), which means that we still need platform independent method triggered by userspace. Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-8-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09peci: Add device detectionIwona Winiarska6-1/+225
Since PECI devices are discoverable, we can dynamically detect devices that are actually available in the system. This change complements the earlier implementation by rescanning PECI bus to detect available devices. For this purpose, it also introduces the minimal API for PECI requests. Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-7-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09peci: Add peci-aspeed controller driverJae Hyun Yoo6-0/+637
ASPEED AST24xx/AST25xx/AST26xx SoCs support the PECI electrical interface (a.k.a PECI wire) that provides a communication channel with Intel processors. This driver allows BMC to discover devices connected to it and communicate with them using PECI protocol. Co-developed-by: Iwona Winiarska <iwona.winiarska@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-6-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09peci: Add core infrastructureIwona Winiarska8-0/+305
Intel processors provide access for various services designed to support processor and DRAM thermal management, platform manageability and processor interface tuning and diagnostics. Those services are available via the Platform Environment Control Interface (PECI) that provides a communication channel between the processor and the Baseboard Management Controller (BMC) or other platform management device. This change introduces PECI subsystem by adding the initial core module and API for controller drivers. Co-developed-by: Jason M Bills <jason.m.bills@linux.intel.com> Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jason M Bills <jason.m.bills@linux.intel.com> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-5-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09ARM: dts: aspeed: Add PECI controller nodesIwona Winiarska3-0/+33
Add PECI controller nodes with all required information. Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-4-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09dt-bindings: Add bindings for peci-aspeedIwona Winiarska1-0/+72
Add device tree bindings for the peci-aspeed controller driver. Co-developed-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-3-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-09dt-bindings: Add generic bindings for PECIIwona Winiarska1-0/+33
Add device tree bindings for the PECI controller. Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Link: https://lore.kernel.org/r/20220208153639.255278-2-iwona.winiarska@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add support for DMA datagrams receiveJorgen Hansen1-24/+79
Use the DMA based receive operation instead of the ioread8_rep based datagram receive when DMA datagrams are supported. In the receive operation, configure the header to point to the page aligned VMCI_MAX_DG_SIZE part of the receive buffer using s/g configuration for the header. This ensures that the existing dispatch routine can be used with little modification. Initiate the receive by writing the lower 32 bit of the buffer to the VMCI_DATA_IN_LOW_ADDR register, and wait for the busy flag to be changed by the device using a wait queue. The existing dispatch routine for received datagrams is reused for the DMA datagrams with a few modifications: - the receive buffer is always the maximum size for DMA datagrams (IO ports would try with a shorter buffer first to reduce overhead of the ioread8_rep operation). - for DMA datagrams, datagrams are provided contiguous in the buffer as opposed to IO port datagrams, where they can start on any page boundary Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-9-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add support for DMA datagrams sendsJorgen Hansen2-2/+77
Use DMA based send operation from the transmit buffer instead of the iowrite8_rep based datagram send when DMA datagrams are supported. The outgoing datagram is sent as inline data in the VMCI transmit buffer. Once the header has been configured, the send is initiated by writing the lower 32 bit of the buffer base address to the VMCI_DATA_OUT_LOW_ADDR register. Only then will the device process the header and the datagram itself. Following that, the driver busy waits (it isn't possible to sleep on the send path) for the header busy flag to change - indicating that the send is complete. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-8-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: allocate send and receive buffers for DMA datagramsJorgen Hansen2-9/+66
If DMA datagrams are used, allocate send and receive buffers in coherent DMA memory. This is done in preparation for the send and receive datagram operations, where the buffers are used for the exchange of data between driver and device. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-7-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: register dummy IRQ handlers for DMA datagramsJorgen Hansen2-5/+51
Register dummy interrupt handlers for DMA datagrams in preparation for DMA datagram receive operations. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-6-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: set OS page sizeJorgen Hansen2-0/+5
Tell the device the page size used by the OS. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-5-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: detect DMA datagram capabilityJorgen Hansen2-0/+12
Detect the VMCI DMA datagram capability, and if present, ack it to the device. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-4-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: add MMIO access to registersJorgen Hansen2-19/+60
Detect the support for MMIO access through examination of the length of the region requested in BAR1. If it is 256KB, the VMCI device supports MMIO access to registers. If MMIO access is supported, map the area of the region used for MMIO access (64KB size at offset 128KB). Add wrapper functions for accessing 32 bit register accesses through either MMIO or IO ports based on device configuration. Sending and receiving datagrams through iowrite8_rep/ioread8_rep is left unchanged for now, and will be addressed in a later change. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-3-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08VMCI: dma dg: whitespace formatting change for vmci register definesJorgen Hansen1-9/+9
Update formatting of existing register defines in preparation for adding additional register definitions for the VMCI device. Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Signed-off-by: Jorgen Hansen <jhansen@vmware.com> Link: https://lore.kernel.org/r/20220207102725.2742-2-jhansen@vmware.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08misc: alcor_pci: Fix an error handling pathChristophe JAILLET1-3/+6
A successful ida_simple_get() should be balanced by a corresponding ida_simple_remove(). Add the missing call in the error handling path of the probe. While at it, switch to ida_alloc()/ida_free() instead to ida_simple_get()/ida_simple_remove(). The latter is deprecated and more verbose. Fixes: 4f556bc04e3c ("misc: cardreader: add new Alcor Micro Cardreader PCI driver") Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/918a9875b7f67b7f8f123c4446452603422e8c5e.1644136776.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08speakup_audptr: cleanup synth_versionSamuel Thibault1-11/+13
The buffer was bigger than necessary, and the while loop not very canonical. Also better use i as variable name for an index. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20220206023845.bpzxtjohekclffra@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08speakup: Allow lower values for the flush parameterSamuel Thibault1-1/+1
Users needing it with the dectlk synth report that a 100ms flush delay is still noticeable and prefer to set it to e.g. 10ms. This leaves the default to 4000ms (since hitting it is a sign that the cable is faulty and should be replaced), but allows to set it as short as 10ms. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Link: https://lore.kernel.org/r/20220205232957.bc6o6yyt5hitg754@begin Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-08comedi: remove redundant assignment to variable buffer_configColin Ian King1-1/+0
Variable buffer_config is being assigned a value that is never read, it is being re-assigned later on. The assignment is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220130232910.9313-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04hpet: remove unused writeq/readq function definitionsCorentin Labbe1-16/+1
On all arch using hpet, only i386 miss writeq/readq. Instead of rewriting them, use linux/io-64-nonatomic-lo-hi.h which already have them. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220125140352.4085290-1-clabbe@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04hpet: fix style issue about braces and alignmentCorentin Labbe1-5/+6
This patch fix all style issue for braces and alignment Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Link: https://lore.kernel.org/r/20220125140311.4084998-1-clabbe@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04fsi: Aspeed: Fix a potential double freeChristophe JAILLET1-6/+11
A struct device can never be devm_alloc()'ed. Here, it is embedded in "struct fsi_master", and "struct fsi_master" is embedded in "struct fsi_master_aspeed". Since "struct device" is embedded, the data structure embedding it must be released with the release function, as is already done here. So use kzalloc() instead of devm_kzalloc() when allocating "aspeed" and update all error handling branches accordingly. This prevent a potential double free(). This also fix another issue if opb_readl() fails. Instead of a direct return, it now jumps in the error handling path. Fixes: 606397d67f41 ("fsi: Add ast2600 master driver") Suggested-by: Greg KH <gregkh@linuxfoundation.org> Suggested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/2c123f8b0a40dc1a061fae982169fe030b4f47e6.1641765339.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: Missing a blank line after declarationsAleksa Vučković1-0/+1
This patch fixes the checkpatch.pl error: < WARNING: Missing a blank line after declarations < #97: FILE: drivers/dio/dio.c:97: < + unsigned int i; < + for (i = 0; i < ARRAY_SIZE(names); i++) Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-7-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: code indent should use tabsAleksa Vučković1-46/+46
This patch fixes the checkpatch.pl error: < ERROR: code indent should use tabs where possible < #61: FILE: drivers/dio/dio.c:61: < + int id;$ < < WARNING: please, no spaces at the start of a line < #61: FILE: drivers/dio/dio.c:61: < + int id;$ < < ERROR: code indent should use tabs where possible < #62: FILE: drivers/dio/dio.c:62: < + const char *name;$ < < WARNING: please, no spaces at the start of a line < #62: FILE: drivers/dio/dio.c:62: < + const char *name;$ + 44 more errors of type "code indent should use tabs where possible" + 41 more warnings of type "please, no spaces at the start of a line" Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-6-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: space required after that ','Aleksa Vučković1-1/+1
This patch fixes the checkpatch.pl error: < ERROR: space required after that ',' (ctx:VxV) < #239: FILE: drivers/dio/dio.c:239: < + strcpy(dev->name,dio_getname(dev->id)); Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-5-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: space prohibited after parenthesisAleksa Vučković1-1/+1
This patch fixes the checkpatch.pl error: < ERROR: space prohibited after that open parenthesis '(' < #67: FILE: drivers/dio/dio.c:67: < +#define DIOFBNAME(x) { DIO_ENCODE_ID( DIO_ID_FBUFFER, DIO_ID2_##x), DIO_DESC2_##x } Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-4-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: trailing whitespaceAleksa Vučković1-12/+12
This patch fixes the checkpatch.pl errors and warnings: < ERROR: trailing whitespace < #5: FILE: drivers/dio/dio.c:5: < + * $ < < ERROR: trailing whitespace < #11: FILE: drivers/dio/dio.c:11: < + * This means that framebuffers should pass it as $ < < ERROR: trailing whitespace < #17: FILE: drivers/dio/dio.c:17: < + * Every DIO card has a fixed interrupt priority level. This function $ < < ERROR: trailing whitespace < #20: FILE: drivers/dio/dio.c:20: < + * Return a character string describing this board [might be "" if $ < < ERROR: trailing whitespace < #25: FILE: drivers/dio/dio.c:25: < + * This file is based on the way the Amiga port handles Zorro II cards, $ + 15 more errors and warnings of type "trailing whitespace" Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-3-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: brace should be on the previous lineAleksa Vučković1-8/+5
This patch fixes the checkpatch.pl errors and warnings: < ERROR: open brace '{' following struct go on the same line < +struct dioname < +{ < < ERROR: that open brace { should be on the previous line < +static struct dioname names[] = < +{ < < ERROR: that open brace { should be on the previous line < + for (scode = 0; scode < DIO_SCMAX; ++scode) < + { < < WARNING: braces {} are not necessary for any arm of this statement < + if (scode >= DIOII_SCBASE) { < [...] < + } else if (scode > DIO_SCMAX || scode < 0) < [...] < + else if (DIO_SCINHOLE(scode)) < [...] Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-2-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers: dio: Use <linux/io.h> instead <asm/io.h>Aleksa Vučković1-1/+1
This patch fixes the checkpatch.pl warning: < WARNING: Use #include <linux/io.h> instead of <asm/io.h> < #36: FILE: drivers/dio/dio.c:36: < +#include <asm/io.h> /* readb() */ Signed-off-by: Aleksa Vučković <aleksav013@gmail.com> Link: https://lore.kernel.org/r/20220127135054.27281-1-aleksav013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04misc: open-dice: Add driver to expose DICE data to userspaceDavid Brazdil4-0/+222
Open Profile for DICE is an open protocol for measured boot compatible with the Trusted Computing Group's Device Identifier Composition Engine (DICE) specification. The generated Compound Device Identifier (CDI) certificates represent the hardware/software combination measured by DICE, and can be used for remote attestation and sealing. Add a driver that exposes reserved memory regions populated by firmware with DICE CDIs and exposes them to userspace via a character device. Userspace obtains the memory region's size from read() and calls mmap() to create a mapping of the memory region in its address space. The mapping is not allowed to be write+shared, giving userspace a guarantee that the data were not overwritten by another process. Userspace can also call write(), which triggers a wipe of the DICE data by the driver. Because both the kernel and userspace mappings use write-combine semantics, all clients observe the memory as zeroed after the syscall has returned. Cc: Andrew Scull <ascull@google.com> Cc: Will Deacon <will@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David Brazdil <dbrazdil@google.com> Link: https://lore.kernel.org/r/20220126231237.529308-3-dbrazdil@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04dt-bindings: reserved-memory: Open Profile for DICEDavid Brazdil1-0/+46
Add DeviceTree bindings for Open Profile for DICE, an open protocol for measured boot. Firmware uses DICE to measure the hardware/software combination and generates Compound Device Identifier (CDI) certificates. These are stored in memory and the buffer is described in the DT as a reserved memory region compatible with 'google,open-dice'. 'no-map' is required to ensure the memory region is never treated by the kernel as system memory. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Brazdil <dbrazdil@google.com> Link: https://lore.kernel.org/r/20220126231237.529308-2-dbrazdil@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: Fix struct mux_state kernel-doc commentYang Li1-1/+1
A warning is reported because a colon was dropped, it is found by running scripts/kernel-doc, which is caused by using 'make W=1'. drivers/mux/core.c:44: warning: Function parameter or member 'state' not described in 'mux_state' Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/a9a970fc-63f9-5ab9-4983-fba5b01bebe2@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: fix grammar, missing "is".Peter Rosin1-1/+1
This makes it easier to parse. Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/75067db8-0264-c49c-daa8-d7a877932711@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: add missing mux_state_getPeter Rosin1-11/+29
And implement devm_mux_state_get in terms of the new function. Now we have both mux_state_get and mux_state_put as convenient functions ready to be exported should someone ever need unmanaged interfaces. Tested-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/6f8cfdfd-9fa6-40d1-09b3-0c9fc50835ac@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04mux: Add support for reading mux state from consumer DT nodeAswath Govindraju3-21/+217
In some cases, we might need to provide the state of the mux to be set for the operation of a given peripheral. Therefore, pass this information using mux-states property. Link: https://lore.kernel.org/lkml/20211123081222.27979-1-a-govindraju@ti.com Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Peter Rosin <peda@axentia.se> (minor edits) Link: https://lore.kernel.org/r/aac25be8-9515-a980-f7cb-709938c84822@axentia.se Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04drivers/android: remove redundant ret variableMinghao Chi1-6/+2
Return value from list_lru_count() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Link: https://lore.kernel.org/r/20220104113500.602158-1-chi.minghao@zte.com.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04pps: clients: gpio: Propagate return value from pps_gpio_probeRobert Hancock1-1/+1
If the pps-gpio driver was probed prior to the GPIO device it uses, the devm_gpiod_get call returned an -EPROBE_DEFER error, but pps_gpio_probe replaced that error code with -EINVAL, causing the pps-gpio probe to fail and not be retried later. Propagate the error return value so that deferred probe works properly. Fixes: 161520451dfa (pps: new client driver using GPIO) Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Signed-off-by: Robert Hancock <robert.hancock@calian.com> Signed-off-by: Rodolfo Giometti <giometti@enneenne.com> Link: https://lore.kernel.org/r/20220112205214.2060954-1-robert.hancock@calian.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04greybus: svc: clean up link configuration hack at helloJohan Hovold1-5/+8
Commit ee2f2074fdb2 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load") added a temporary hack which reconfigures the link at HELLO by abusing the deferred request processing mechanism. Restructure the HELLO request processing so that the link-configuration work is queued before creating the debugfs files and add a comment explaining why it's there. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220202113347.1288-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04greybus: svc: clean up hello error pathJohan Hovold1-2/+3
While currently safe, it is unnecessary (and confusing) to try to destroy the watchdog when watchdog creation fails. Change the corresponding error path to only deregister the svc. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220202113347.1288-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-02-04greybus: svc: fix an error handling bug in gb_svc_hello()Dan Carpenter1-1/+7
Cleanup if gb_svc_queue_deferred_request() fails. Link: https://lore.kernel.org/r/20220202072016.GA6748@kili Fixes: ee2f2074fdb2 ("greybus: svc: reconfig APBridgeA-Switch link to handle required load") Cc: stable@vger.kernel.org # 4.9 [johan: fix commit summary prefix and rename label ] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220202113347.1288-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-30Merge tag 'v5.17-rc2' into char-misc-nextGreg Kroah-Hartman433-2086/+4640
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-30Linux 5.17-rc2v5.17-rc2Linus Torvalds1-1/+1
2022-01-30Merge tag 'irq_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds6-36/+121
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Borislav Petkov: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) * tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support irqchip/gic-v3-its: Reset each ITS's BASERn register before probe irqchip/gic-v3-its: Fix build for !SMP irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap irqchip/realtek-rtl: Service all pending interrupts irqchip/realtek-rtl: Fix off-by-one in routing irqchip/realtek-rtl: Map control data to virq irqchip/apple-aic: Drop unused ipi_hwirq field
2022-01-30Merge tag 'perf_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds1-4/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - Prevent accesses to the per-CPU cgroup context list from another CPU except the one it belongs to, to avoid list corruption - Make sure parent events are always woken up to avoid indefinite hangs in the traced workload * tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cgroup event list management perf: Always wake the parent event
2022-01-30Merge tag 'sched_urgent_for_v5.17_rc2_p2' of ↵Linus Torvalds1-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Borislav Petkov: "Make sure the membarrier-rseq fence commands are part of the reported set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY" * tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
2022-01-30Merge tag 'x86_urgent_for_v5.17_rc2' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Add another Intel CPU model to the list of CPUs supporting the processor inventory unique number - Allow writing to MCE thresholding sysfs files again - a previous change had accidentally disabled it and no one noticed. Goes to show how much is this stuff used * tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN x86/MCE/AMD: Allow thresholding interface updates after init
2022-01-30Merge branch 'akpm' (patches from Andrew)Linus Torvalds12-70/+91
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: sysctl, binfmt, ia64, mm (memory-failure, folios, kasan, and psi), selftests, and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: fix a deadlock when commit trans jbd2: export jbd2_journal_[grab|put]_journal_head psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n mm, kasan: use compare-exchange operation to set KASAN page tag kasan: test: fix compatibility with FORTIFY_SOURCE tools/testing/scatterlist: add missing defines mm: page->mapping folio->mapping should have the same offset memory-failure: fetch compound_head after pgmap_pfn_valid() ia64: make IA64_MCA_RECOVERY bool instead of tristate binfmt_misc: fix crash when load/unload module include/linux/sysctl.h: fix register_sysctl_mount_point() return type
2022-01-30ocfs2: fix a deadlock when commit transJoseph Qi1-14/+11
commit 6f1b228529ae introduces a regression which can deadlock as follows: Task1: Task2: jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head __jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock) jbd2_journal_put_journal_head jbd_lock_bh_journal_head Task1 and Task2 lock bh->b_state and jh->b_state_lock in different order, which finally result in a deadlock. So use jbd2_journal_[grab|put]_journal_head instead in ocfs2_test_bg_bit_allocatable() to fix it. Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com Fixes: 6f1b228529ae ("ocfs2: fix race between searching chunks and release journal_head from buffer_head") Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Tested-by: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Reported-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30jbd2: export jbd2_journal_[grab|put]_journal_headJoseph Qi1-0/+2
Patch series "ocfs2: fix a deadlock case". This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols jbd2_journal_[grab|put]_journal_head as preparation and later use them in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the deadlock. This patch (of 2): This exports symbols jbd2_journal_[grab|put]_journal_head, which will be used outside modules, e.g. ocfs2. Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Cc: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-30psi: fix "defined but not used" warnings when CONFIG_PROC_FS=nSuren Baghdasaryan1-38/+41
When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b73bf ("psi: introduce psi monitor") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-09 14:05:32 +0300