summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-09-24watchdog: constify watchdog_ops structuresJulia Lawall6-6/+6
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-24watchdog: tegra: constify watchdog_ops structuresJulia Lawall1-1/+1
Check for watchdog_ops structures that are only stored in the ops field of a watchdog_device structure. This field is declared const, so watchdog_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct watchdog_ops i@p = { ... }; @ok@ identifier r.i; struct watchdog_device e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct watchdog_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct watchdog_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-24watchdog: iTCO_wdt: constify iTCO_wdt_pm structureJulia Lawall1-1/+1
iTCO_wdt_pm, of type struct dev_pm_ops, is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-24watchdog: cadence_wdt: Fix the suspend resumeShubhrajyoti Datta1-7/+11
Currently even if no users are there the suspend tries to stop the watchdog and resume starts it. so after resume the watchdog starts and resets the board. Fix the same by adding a check for users. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: txx9wdt: Add missing clock (un)prepare calls for CCFGeert Uytterhoeven1-3/+3
While the custom minimal TXx9 clock implementation doesn't need or use clock (un)prepare calls (they are dummies if !CONFIG_HAVE_CLK_PREPARE), they are mandatory when using the Common Clock Framework. Hence add them, to prepare for the advent of CCF. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog-asm9260: Delete owner assignmentMarkus Elfring1-1/+0
The field "owner" is set by core. Thus delete an extra initialisation. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: ziirave_wdt: Add support to upload the firmware.Enric Balletbo i Serra1-5/+404
This patch adds and entry to the sysfs to start firmware upload process on the specified device with the requested firmware. The uploading of the firmware needs only to happen once per firmware upgrade, as the firmware is stored in persistent storage. If the firmware upload or the firmware verification fails then we print and error message and exit. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: xilinx: Add clock supportShubhrajyoti Datta2-2/+26
Add support for the clock. Currently we enable at probe and relinquish at remove. Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: pcwd_usb: don't print error when allocating urb failsWolfram Sang1-3/+1
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: dw_wdt: Read clock rate only once and validate itGuenter Roeck1-2/+9
Coverity reports: divide_by_zero: In expression readl(dw_wdt->regs + 8) / clk_get_rate(dw_wdt->clk), division by expression clk_get_rate(dw_wdt->clk) which may be zero has undefined behavior. The clock used for the watchdog timer won't change its rate, so read it only once during probe. Also validate it and abort the probe function with an error if it is 0. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-23watchdog: core: Fix devres_alloc() allocation sizeGuenter Roeck1-1/+1
Coverity reports: Passing argument 152UL /* sizeof (*wdd) */ to function __devres_alloc_node and then casting the return value to struct watchdog_device ** is suspicious. Allocation size needs to be sizeof(*rcwdd), not sizeof(*wdd). Fixes: 83fbae5a148c ("watchdog: Add a device managed API for ...") Cc: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-09-19Linux 4.8-rc7v4.8-rc7Linus Torvalds1-1/+1
2016-09-18Merge tag 'usb-4.8-rc7' of ↵Linus Torvalds3-13/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are two small fixes, and one new device id, for 4.8-rc7 The fixes solve a build error that was reported in your tree for the blackfin arch, and resolve an issue with a number of broken USB devices that reported the wrong interval rate. Included here is also a new device id for the usb-serial driver. All have been in linux-next with no reported issues" * tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: change bInterval default to 10 ms usb: musb: Fix tusb6010 compile error on blackfin USB: serial: simple: add support for another Infineon flashloader
2016-09-18Merge tag 'fixes-for-linus-v4.8-rc7' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull uaccess fixes from Guenter Roeck: "Two patches fixing problems introduced with copy_from_user changes" * tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: openrisc: fix the fix of copy_from_user() avr32: fix 'undefined reference to `___copy_from_user'
2016-09-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-15/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A couple of small fixes to x86 perf drivers: - Measure L2 for HW_CACHE* events on AMD - Fix the address filter handling in the intel/pt driver - Handle the BTS disabling at the proper place" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2 perf/x86/intel/pt: Do validate the size of a kernel address filter perf/x86/intel/pt: Fix kernel address filter's offset validation perf/x86/intel/pt: Fix an off-by-one in address filter configuration perf/x86/intel: Don't disable "intel_bts" around "intel" event batching
2016-09-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP build fixlet from Thomas Gleixner: "Add a missing include in cpuhotplug.h" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Include linux/types.h in linux/cpuhotplug.h
2016-09-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Two patches from Boris which address a potential deadlock in the atmel irq chip driver" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/atmel-aic: Fix potential deadlock in ->xlate() genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
2016-09-18openrisc: fix the fix of copy_from_user()Guenter Roeck1-1/+1
Since commit acb2505d0119 ("openrisc: fix copy_from_user()"), copy_from_user() returns the number of bytes requested, not the number of bytes not copied. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: acb2505d0119 ("openrisc: fix copy_from_user()") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-18avr32: fix 'undefined reference to `___copy_from_user'Guenter Roeck1-2/+2
avr32 builds fail with: arch/avr32/kernel/built-in.o: In function `arch_ptrace': (.text+0x650): undefined reference to `___copy_from_user' arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax': (.text+0x5dd8): undefined reference to `___copy_from_user' kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin': sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user' kernel/built-in.o: In function `ptrace_has_cap': ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user' kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to `___copy_from_user' follow Fixes: 8630c32275ba ("avr32: fix copy_from_user()") Cc: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2016-09-18fix iov_iter_fault_in_readable()Al Viro2-23/+3
... by turning it into what used to be multipages counterpart Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-17Merge tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-18/+33
Pull MMC fixes from Ulf Hansson: "MMC host: - omap/omap_hsmmc: Initialize dma_slave_config to avoid random data - sdhci-st: Handle interconnect clock" * tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: omap: Initialize dma_slave_config to avoid random data in it's fields mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data mmc: sdhci-st: Handle interconnect clock dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
2016-09-17Merge tag 'powerpc-4.8-6' of ↵Linus Torvalds3-9/+29
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Fixes for code merged this cycle: - Fix restore of SPRs upon wake up from hypervisor state loss from Gautham R Shenoy - Fix the state of root PE from Gavin Shan - Detach from PE on releasing PCI device from Gavin Shan - Fix size of NUM_CPU_FTR_KEYS on 32-bit - Fix missed TCE invalidations that should fallback to OPAL" * tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL powerpc/powernv: Detach from PE on releasing PCI device powerpc/powernv: Fix the state of root PE powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
2016-09-17Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-20/+42
Pull cifs fixes from Steve French: "Small set of cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: Move check for prefix path to within cifs_get_root() Compare prepaths when comparing superblocks Fix memory leaks in cifs_do_mount()
2016-09-17Merge tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-2/+3
Pull nfsd bugfix from Bruce Fields: "Fix a memory corruption bug that I introduced in 4.7" * tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linux: svcauth_gss: Revert 64c59a3726f2 ("Remove unnecessary allocation")
2016-09-17Merge tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds11-23/+61
Pull drm fixes from Dave Airlie: "Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of atmel fixes. Nothing too out there at this stage, though I think some people are holidaying so it's been quiet enough" * tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message drm/vc4: mark vc4_bo_cache_purge() static drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB drm/i915: disable 48bit full PPGTT when vGPU is active drm/i915: enable vGPU detection for all drm/atmel-hlcdc: Make ->reset() implementation static drm: atmel-hlcdc: Fix vertical scaling drm/vc4: Allow some more signals to be packed with uniform resets. drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
2016-09-17Merge tag 'pm-4.8-rc7' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "More annotations of tracepoints in the runtime PM framework to prevent RCU from complaining when that code is invoked from the idle path (Paul McKenney)" * tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / runtime: Use _rcuidle for runtime suspend tracepoints
2016-09-17Merge tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux into ↵Dave Airlie2-3/+9
drm-fixes This pull request brings in a fix for crashes in X on VC4. * tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux: drm/vc4: mark vc4_bo_cache_purge() static drm/vc4: Allow some more signals to be packed with uniform resets.
2016-09-17Merge tag 'drm-intel-fixes-2016-09-15' of ↵Dave Airlie3-7/+39
git://anongit.freedesktop.org/drm-intel into drm-fixes i915 fixes from Jani. * tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel: drm/i915: Ignore OpRegion panel type except on select machines Revert "drm/i915/psr: Make idle_frames sensible again" drm/i915: Restore lost "Initialized i915" welcome message
2016-09-16Merge tag 'for-linus' of ↵Linus Torvalds15-80/+189
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "Round three of 4.8 rc fixes. This is likely the last rdma pull request this cycle. The new rxe driver had a few issues (you probably saw the boot bot bug report) and they should be addressed now. There are a couple other fixes here, mainly mlx4. There are still two outstanding issues that need resolved but I don't think their fix will make this kernel cycle. Summary: - Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/rdmavt: Don't vfree a kzalloc'ed memory region IB/rxe: Fix kmem_cache leak IB/rxe: Fix race condition between requester and completer IB/rxe: Fix duplicate atomic request handling IB/rxe: Fix kernel panic in udp_setup_tunnel IB/mlx5: Set source mac address in FTE IB/mlx5: Enable MAD_IFC commands for IB ports only IB/mlx4: Diagnostic HW counters are not supported in slave mode IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV IB/mlx4: Fix code indentation in QP1 MAD flow IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV IB/ipoib: Don't allow MC joins during light MC flush IB/rxe: fix GFP_KERNEL in spinlock context
2016-09-16Merge tag 'fixes-for-linus' of ↵Linus Torvalds25-93/+102
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here are a couple of bugfixes for v4.8-rc. Most of them have actually been around for a while this time but for some reason didn't get applied early on. The shmobile regulator fix is the only one that isn't completely obvious. Device tree changes: - archtimer interrupts must be level triggered (multiple platforms) - fix for USB and MMC clocks on STiH410 - fix split DT repository in case of raspberry-pi 3 - a new use of skeleton.dtsi on arm64 has crept in after that was removed. defconfig updates: - xilinx vdma has a new Kconfig symbol name - keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1 Code fixes: - fix regulator quirk on shmobile - suspend-to-ram regression on EXYNOS Maintainer updates: - Javier Martinez Canillas is now a reviewer for Samsung EXYNOS" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: keystone: defconfig: Fix USB configuration arm64: dts: Fix broken architected timer interrupt trigger ARM: multi_v7_defconfig: update XILINX_VDMA ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB) ARM: shmobile: fix regulator quirk for Gen2 ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback MAINTAINERS: Add myself as reviewer for Samsung Exynos support
2016-09-16Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds16-101/+114
Pull ARM fixes from Russell King: "Most of this update are fixes primarily discovered from testing on the older StrongARM 1110 and PXA systems, as a result of recent interest from several people in these platforms: - Locomo interrupt handling incorrectly stores the handler data in the chip's private data slot: when Locomo is combined with an interrupt controller who's chip uses the chip private data, this leads to an oops. - SA1111 was missing a call to clk_disable() to clean up after a failed probe. - SA1111 and PCMCIA suspend/resume was broken: The PCMCIA "ds" layer was using the legacy bus suspend/resume methods, which the core PM code is no longer calling as a result of device_pm_check_callbacks() introduced in commit aa8e54b559479 ("PM / sleep: Go direct_complete if driver has no callbacks"). SA1111 was broken due to changes to PCMCIA which makes PCMCIA suspend itself later than the SA1111 code expects, and resume before the SA1111 code has initialised access to the pcmcia sub-device. - the default SA1111 interrupt mask polarity got messed up when it was converted to use a dynamic interrupt base number for its interrupts. - fix platform_get_irq() error code propagation, which was causing problems on platforms where the interrupt may not be available at probe time in DT setups. - fix the lack of clock to PCMCIA code on PXA platforms, which was omitted in conversions of PXA to CCF. - fix an oops in the PXA PCMCIA code caused by a previous commit not realising that Lubbock is different from the rest of the PXA PCMCIA drivers. - ensure that SA1111 low-level PCMCIA drivers propagate their error codes to the main probe function, rather than the driver silently accepting a failure. - fix the sa11xx debugfs reporting of timing information, which always indicated zero due to the clock being a factor of 1000 out. - fix the polarity of the status change signal reported from the sockets. Lastly, one ARM specific commit from Stefan Agner fixing the LPAE cache attributes" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: pxa/lubbock: add pcmcia clock ARM: locomo: fix locomo irq handling ARM: 8612/1: LPAE: initialize cache policy correctly ARM: sa1111: fix missing clk_disable() ARM: sa1111: fix pcmcia suspend/resume ARM: sa1111: fix pcmcia interrupt mask polarity ARM: sa1111: fix error code propagation in sa1111_probe() pcmcia: lubbock: fix sockets configuration pcmcia: sa1111: fix propagation of lowlevel board init return code pcmcia: soc_common: fix SS_STSCHG polarity pcmcia: sa11xx_base: add units to the timing information pcmcia: sa11xx_base: fix reporting of timing information pcmcia: ds: fix suspend/resume
2016-09-16IB/rdmavt: Don't vfree a kzalloc'ed memory regionColin Ian King1-1/+1
The userspace memory region 'mr' is allocated with kzalloc in __rvt_alloc_mr however it is incorrectly being freed with vfree in __rvt_free_mr. Fix this by using kfree to free it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kmem_cache leakYonatan Cohen1-0/+13
Decrement qp reference when handling error path in completer to prevent kmem_cache leak. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix race condition between requester and completerYonatan Cohen1-13/+44
rxe_requester() is sending a pkt with rxe_xmit_packet() and then calls rxe_update() to update the wqe and qp's psn values. But sometimes the response is received before the requester had time to update the wqe in which case the completer acts on errornous wqe values. This fix updates the wqe and qp before actually sending the request and rolls back when xmit fails. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix duplicate atomic request handlingYonatan Cohen1-5/+6
When handling ack for atomic opcodes like "fetch&add" or "cmp&swp", the method send_atomic_ack() saves the ack before sending it, in case it gets lost and never reach the requester. In which case the method duplicate_request() will need to find it using the duplicated request.psn. But send_atomic_ack() used a wrong psn value and thus the above ack was never found. This fix uses the ack.psn to locate the ack in case its needed. This fix also copies the ack packet to the skb's control buffer since duplicate_request() will need it when calling rxe_xmit_packet() Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: Fix kernel panic in udp_setup_tunnelYonatan Cohen3-34/+51
Disable creation of a UDP socket for ipv6 when CONFIG_IPV6 is not enabeld. Since udp_sock_create6() returns 0 when CONFIG_IPV6 is not set [ 46.888632] IP: [<c220705a>] setup_udp_tunnel_sock+0x6/0x4f [ 46.891355] *pdpt = 0000000000000000 *pde = f000ff53f000ff53 [ 46.893918] Oops: 0002 [#1] PREEMPT [ 46.896014] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-rc4-00001-g8700e3e #1 [ 46.900280] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014 [ 46.904905] task: cf06c040 ti: cf05e000 task.ti: cf05e000 [ 46.907854] EIP: 0060:[<c220705a>] EFLAGS: 00210246 CPU: 0 [ 46.911137] EIP is at setup_udp_tunnel_sock+0x6/0x4f [ 46.914070] EAX: 00000044 EBX: 00000001 ECX: cf05fef0 EDX: ca8142e0 [ 46.917236] ESI: c2c4505b EDI: cf05fef0 EBP: cf05fed0 ESP: cf05fed0 [ 46.919836] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 46.922046] CR0: 80050033 CR2: 000001fc CR3: 02cec000 CR4: 000006b0 [ 46.924550] Stack: [ 46.926014] cf05ff10 c1fd4657 ca8142e0 0000000a 00000000 00000000 0000b712 00000008 [ 46.931274] 00000000 6bb5bd01 c1fd48de 00000000 00000000 cf05ff1c 00000000 00000000 [ 46.936122] cf05ff1c c1fd4bdf 00000000 cf05ff28 c2c4507b ffffffff cf05ff88 c2bf1c74 [ 46.942350] Call Trace: [ 46.944403] [<c1fd4657>] rxe_setup_udp_tunnel+0x8f/0x99 [ 46.947689] [<c1fd48de>] ? net_to_rxe+0x4e/0x4e [ 46.950567] [<c1fd4bdf>] rxe_net_init+0xe/0xa4 [ 46.953147] [<c2c4507b>] rxe_module_init+0x20/0x4c [ 46.955448] [<c2bf1c74>] do_one_initcall+0x89/0x113 [ 46.957797] [<c2bf15eb>] ? set_debug_rodata+0xf/0xf [ 46.959966] [<c2bf1dbc>] ? kernel_init_freeable+0xbe/0x15b [ 46.962262] [<c2bf1ddc>] kernel_init_freeable+0xde/0x15b [ 46.964418] [<c232eb54>] kernel_init+0x8/0xd0 [ 46.966618] [<c2333122>] ret_from_kernel_thread+0xe/0x24 [ 46.969592] [<c232eb4c>] ? rest_init+0x6f/0x6f Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Set source mac address in FTEMaor Gottlieb1-0/+7
Set the source mac address in the FTE when L2 specification is provided. Fixes: 038d2ef87572 ('IB/mlx5: Add flow steering support') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx5: Enable MAD_IFC commands for IB ports onlyNoa Osherovich1-1/+3
MAD_IFC command is supported only for physical functions (PF) and when physical port is IB. The proposed fix enforces it. Fixes: d603c809ef91 ("IB/mlx5: Fix decision on using MAD_IFC") Reported-by: David Chang <dchang@suse.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Diagnostic HW counters are not supported in slave modeKamal Heib1-0/+3
Modify the mlx4_ib_diag_counters() to avoid the following error in the hypervisor when the slave tries to query the hardware counters in SR-IOV mode. mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1 Fixes: 3f85f2aaabf7 ("IB/mlx4: Add diagnostic hardware counters") Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOVJack Morgenstein3-3/+27
When sending QP1 MAD packets which use a GRH, the source GID (which consists of the 64-bit subnet prefix, and the 64 bit port GUID) must be included in the packet GRH. For SR-IOV, a GID cache is used, since the source GID needs to be the slave's source GID, and not the Hypervisor's GID. This cache also included a subnet_prefix. Unfortunately, the subnet_prefix field in the cache was never initialized (to the default subnet prefix 0xfe80::0). As a result, this field remained all zeroes. Therefore, when SR-IOV was active, all QP1 packets which included a GRH had a source GID subnet prefix of all-zeroes. However, the subnet-prefix should initially be 0xfe80::0 (the default subnet prefix). In addition, if OpenSM modifies a port's subnet prefix, the new subnet prefix must be used in the GRH when sending QP1 packets. To fix this we now initialize the subnet prefix in the SR-IOV GID cache to the default subnet prefix. We update the cached value if/when OpenSM modifies the port's subnet prefix. We take this cached value when sending QP1 packets when SR-IOV is active. Note that the value is stored as an atomic64. This eliminates any need for locking when the subnet prefix is being updated. Note also that we depend on the FW generating the "port management change" event for tracking subnet-prefix changes performed by OpenSM. If running early FW (before 2.9.4630), subnet prefix changes will not be tracked (but the default subnet prefix still will be stored in the cache; therefore users who do not modify the subnet prefix will not have a problem). IF there is a need for such tracking also for early FW, we will add that capability in a subsequent patch. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix code indentation in QP1 MAD flowJack Morgenstein1-17/+19
The indentation in the QP1 GRH flow in procedure build_mlx_header is really confusing. Fix it, in preparation for a commit which touches this code. Fixes: 1ffeb2eb8be9 ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOVAlex Vesker1-7/+7
Because of an incorrect bit-masking done on the join state bits, when handling a join request we failed to detect a difference between the group join state and the request join state when joining as send only full member (0x8). This caused the MC join request not to be sent. This issue is relevant only when SRIOV is enabled and SM supports send only full member. This fix separates scope bits and join states bits a nibble each. Fixes: b9c5d6a64358 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/ipoib: Don't allow MC joins during light MC flushAlex Vesker1-0/+9
This fix solves a race between light flush and on the fly joins. Light flush doesn't set the device to down and unset IPOIB_OPER_UP flag, this means that if while flushing we have a MC join in progress and the QP was attached to BC MGID we can have a mismatches when re-attaching a QP to the BC MGID. The light flush would set the broadcast group to NULL causing an on the fly join to rejoin and reattach to the BC MCG as well as adding the BC MGID to the multicast list. The flush process would later on remove the BC MGID and detach it from the QP. On the next flush the BC MGID is present in the multicast list but not found when trying to detach it because of the previous double attach and single detach. [18332.714265] ------------[ cut here ]------------ [18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core] ... [18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011 [18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000 [18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300 [18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280 [18332.796199] Call Trace: [18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c [18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0 [18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20 [18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core] [18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib] [18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib] [18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib] [18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib] [18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0 [18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40 [18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80 [18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib] [18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib] [18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30 [18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50 [18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170 [18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0 [18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50 [18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0 [18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0 [18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0 [18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25 [18332.894727] ---[ end trace 09ebbe31f831ef17 ]--- Fixes: ee1e2c82c245 ("IPoIB: Refresh paths instead of flushing them on SM change events") Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16IB/rxe: fix GFP_KERNEL in spinlock contextAlexey Khoroshilov1-1/+1
There is skb_clone(skb, GFP_KERNEL) in spinlock context in rxe_rcv_mcast_pkt(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-09-16Merge tag 'usb-serial-4.8-rc7' of ↵Greg Kroah-Hartman1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.8-rc7 Here's another Infineon flashloader device id. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-09-16Merge tag 'samsung-fixes-4.8-2' of ↵Arnd Bergmann2-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes Pull "ARM: exynos: Fixes for v4.8, secound round" from Krzysztof Kozłowski: 1. A recent change in populating irqchip devices from Device Tree broke Suspend to RAM on Exynos boards due to lack of probing of PMU (Power Management Unit) driver. Multiple drivers attach to the PMU's DT node: irqchip, clock controller and PMU platform driver for handling suspend. The new irqchip code marked the PMU's DT node as OF_POPULATED but we need to attach to this node also PMU platform driver. 2. Add Javier as additional reviewer for Exynos patches. * tag 'samsung-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback MAINTAINERS: Add myself as reviewer for Samsung Exynos support
2016-09-16USB: change bInterval default to 10 msAlan Stern1-11/+17
Some full-speed mceusb infrared transceivers contain invalid endpoint descriptors for their interrupt endpoints, with bInterval set to 0. In the past they have worked out okay with the mceusb driver, because the driver sets the bInterval field in the descriptor to 1, overwriting whatever value may have been there before. However, this approach was never sanctioned by the USB core, and in fact it does not work with xHCI controllers, because they use the bInterval value that was present when the configuration was installed. Currently usbcore uses 32 ms as the default interval if the value in the endpoint descriptor is invalid. It turns out that these IR transceivers don't work properly unless the interval is set to 10 ms or below. To work around this mceusb problem, this patch changes the endpoint-descriptor parsing routine, making the default interval value be 10 ms rather than 32 ms. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Wade Berrier <wberrier@gmail.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16usb: musb: Fix tusb6010 compile error on blackfinTony Lindgren1-1/+1
We have CONFIG_BLACKFIN ifdef redefining all musb registers in musb_regs.h and tusb6010.h is never included causing a build error with blackfin-allmodconfig and COMPILE_TEST. Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN is selected. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2Matt Fleming2-4/+4
While the Intel PMU monitors the LLC when perf enables the HW_CACHE_REFERENCES and HW_CACHE_MISSES events, these events monitor L1 instruction cache fetches (0x0080) and instruction cache misses (0x0081) on the AMD PMU. This is extremely confusing when monitoring the same workload across Intel and AMD machines, since parameters like, $ perf stat -e cache-references,cache-misses measure completely different things. Instead, make the AMD PMU measure instruction/data cache and TLB fill requests to the L2 and instruction/data cache and TLB misses in the L2 when HW_CACHE_REFERENCES and HW_CACHE_MISSES are enabled, respectively. That way the events measure unified caches on both platforms. Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: <stable@vger.kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1472044328-21302-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-16perf/x86/intel/pt: Do validate the size of a kernel address filterAlexander Shishkin1-2/+7
Right now, the kernel address filters in PT are prone to integer overflow that may happen in adding filter's size to its offset to obtain the end of the range. Such an overflow would also throw a #GP in the PT event configuration path. Fix this by explicitly validating the result of this calculation. Reported-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: stable@vger.kernel.org # v4.7 Cc: stable@vger.kernel.org#v4.7 Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160915151352.21306-4-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-08-29 07:03:27 +0300