summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-10-15Merge branch 'for-3.18-consistent-ops' of ↵Linus Torvalds149-547/+560
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu Pull percpu consistent-ops changes from Tejun Heo: "Way back, before the current percpu allocator was implemented, static and dynamic percpu memory areas were allocated and handled separately and had their own accessors. The distinction has been gone for many years now; however, the now duplicate two sets of accessors remained with the pointer based ones - this_cpu_*() - evolving various other operations over time. During the process, we also accumulated other inconsistent operations. This pull request contains Christoph's patches to clean up the duplicate accessor situation. __get_cpu_var() uses are replaced with with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr(). Unfortunately, the former sometimes is tricky thanks to C being a bit messy with the distinction between lvalues and pointers, which led to a rather ugly solution for cpumask_var_t involving the introduction of this_cpu_cpumask_var_ptr(). This converts most of the uses but not all. Christoph will follow up with the remaining conversions in this merge window and hopefully remove the obsolete accessors" * 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits) irqchip: Properly fetch the per cpu offset percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write. percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t Revert "powerpc: Replace __get_cpu_var uses" percpu: Remove __this_cpu_ptr clocksource: Replace __this_cpu_ptr with raw_cpu_ptr sparc: Replace __get_cpu_var uses avr32: Replace __get_cpu_var with __this_cpu_write blackfin: Replace __get_cpu_var uses tile: Use this_cpu_ptr() for hardware counters tile: Replace __get_cpu_var uses powerpc: Replace __get_cpu_var uses alpha: Replace __get_cpu_var ia64: Replace __get_cpu_var uses s390: cio driver &__get_cpu_var replacements s390: Replace __get_cpu_var uses mips: Replace __get_cpu_var uses MIPS: Replace __get_cpu_var uses in FPU emulator. arm: Replace __this_cpu_ptr with raw_cpu_ptr ...
2014-10-15Merge tag 'llvmlinux-for-v3.18' of ↵Linus Torvalds12-159/+122
git://git.linuxfoundation.org/llvmlinux/kernel Pull LLVM updates from Behan Webster: "These patches remove the use of VLAIS using a new SHASH_DESC_ON_STACK macro. Some of the previously accepted VLAIS removal patches haven't used this macro. I will push new patches to consistently use this macro in all those older cases for 3.19" [ More LLVM patches coming in through subsystem trees, and LLVM itself needs some fixes that are already in many distributions but not in released versions of LLVM. Some day this will all "just work" - Linus ] * tag 'llvmlinux-for-v3.18' of git://git.linuxfoundation.org/llvmlinux/kernel: crypto: LLVMLinux: Remove VLAIS usage from crypto/testmgr.c security, crypto: LLVMLinux: Remove VLAIS from ima_crypto.c crypto: LLVMLinux: Remove VLAIS usage from libcrc32c.c crypto: LLVMLinux: Remove VLAIS usage from crypto/hmac.c crypto, dm: LLVMLinux: Remove VLAIS usage from dm-crypt crypto: LLVMLinux: Remove VLAIS from crypto/.../qat_algs.c crypto: LLVMLinux: Remove VLAIS from crypto/omap_sham.c crypto: LLVMLinux: Remove VLAIS from crypto/n2_core.c crypto: LLVMLinux: Remove VLAIS from crypto/mv_cesa.c crypto: LLVMLinux: Remove VLAIS from crypto/ccp/ccp-crypto-sha.c btrfs: LLVMLinux: Remove VLAIS crypto: LLVMLinux: Add macro to remove use of VLAIS in crypto code
2014-10-15Merge tag 'iommu-updates-v3.18' of ↵Linus Torvalds25-356/+461
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This pull-request includes: - change in the IOMMU-API to convert the former iommu_domain_capable function to just iommu_capable - various fixes in handling RMRR ranges for the VT-d driver (one fix requires a device driver core change which was acked by Greg KH) - the AMD IOMMU driver now assigns and deassigns complete alias groups to fix issues with devices using the wrong PCI request-id - MMU-401 support for the ARM SMMU driver - multi-master IOMMU group support for the ARM SMMU driver - various other small fixes all over the place" * tag 'iommu-updates-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (41 commits) iommu/vt-d: Work around broken RMRR firmware entries iommu/vt-d: Store bus information in RMRR PCI device path iommu/vt-d: Only remove domain when device is removed driver core: Add BUS_NOTIFY_REMOVED_DEVICE event iommu/amd: Fix devid mapping for ivrs_ioapic override iommu/irq_remapping: Fix the regression of hpet irq remapping iommu: Fix bus notifier breakage iommu/amd: Split init_iommu_group() from iommu_init_device() iommu: Rework iommu_group_get_for_pci_dev() iommu: Make of_device_id array const amd_iommu: do not dereference a NULL pointer address. iommu/omap: Remove omap_iommu unused owner field iommu: Remove iommu_domain_has_cap() API function IB/usnic: Convert to use new iommu_capable() API function vfio: Convert to use new iommu_capable() API function kvm: iommu: Convert to use new iommu_capable() API function iommu/tegra: Convert to iommu_capable() API function iommu/msm: Convert to iommu_capable() API function iommu/vt-d: Convert to iommu_capable() API function iommu/fsl: Convert to iommu_capable() API function ...
2014-10-15Merge tag 'clk-for-linus-3.18' of ↵Linus Torvalds101-798/+4134
git://git.linaro.org/people/mike.turquette/linux Pull clock tree updates from Mike Turquette: "The clk tree changes for 3.18 are dominated by clock drivers. Mostly fixes and enhancements to existing drivers as well as new drivers. This tag contains a bit more arch code than I usually take due to some OMAP2+ changes. Additionally it contains the restart notifier handlers which are merged as a dependency into several trees. The PXA changes are the only messy part. Due to having a stable tree I had to revert one patch and follow up with one more fix near the tip of this tag. Some dead code is introduced but it will soon become live code after 3.18-rc1 is released as the rest of the PXA family is converted over to the common clock framework. Another trend in this tag is that multiple vendors have started to push the complexity of changing their CPU frequency into the clock driver, whereas this used to be done in CPUfreq drivers. Changes to the clk core include a generic gpio-clock type and a clk_set_phase() function added to the top-level clk.h api. Due to some confusion on the fbdev mailing list the kernel boot parameters documentation was updated to further explain the clk_ignore_unused parameter, which is often required by users of the simplefb driver. Finally some fixes to the locking around the clock debugfs stuff was done to prevent deadlocks when interacting with other subsystems." * tag 'clk-for-linus-3.18' of git://git.linaro.org/people/mike.turquette/linux: (99 commits) clk: pxa clocks build system fix Revert "arm: pxa: Transition pxa27x to clk framework" clk: samsung: register restart handlers for s3c2412 and s3c2443 clk: rockchip: add restart handler clk: rockchip: rk3288: i2s_frac adds flag to set parent's rate doc/kernel-parameters.txt: clarify clk_ignore_unused arm: pxa: Transition pxa27x to clk framework dts: add devicetree bindings for pxa27x clocks clk: add pxa27x clock drivers arm: pxa: add clock pll selection bits clk: dts: document pxa clock binding clk: add pxa clocks infrastructure clk: gpio-gate: Ensure gpiod_ APIs are prototyped clk: ti: dra7-atl-clock: Mark the device as pm_runtime_irq_safe clk: ti: LLVMLinux: Move __init outside of type definition clk: ti: consider the fact that of_clk_get() might return an error clk: ti: dra7-atl-clock: fix a memory leak clk: ti: change clock init to use generic of_clk_init clk: hix5hd2: add I2C clocks clk: hix5hd2: add watchdog0 clocks ...
2014-10-15Merge tag 'mfd-for-linus-3.18' of ↵Linus Torvalds70-403/+2061
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - DT clean-ups in da9055-core, max14577, rn5t618, arizona, hi6421, stmpe, twl4030 - Export symbols for use in modules in max14577 - Plenty of static code analysis/Coccinelle fixes throughout the SS - Regmap clean-ups in arizona, wm5102, wm5110, da9052, tps65217, rk808 - Remove unused/duplicate code in da9052, 88pm860x, ti_ssp, lpc_sch, arizona - Bug fixes in ti_am335x_tscadc, da9052, ti_am335x_tscadc, rtsx_pcr - IRQ fixups in arizona, stmpe, max14577 - Regulator related changes in axp20x - Pass DMA coherency information from parent => child in MFD core - Rename DT document files for consistency - Add ACPI support to the MFD core - Add Andreas Werner to MAINTAINERS for MEN F21BMC New drivers/supported devices: - New driver for MEN 14F021P00 Board Management Controller - New driver for Ricoh RN5T618 PMIC - New driver for Rockchip RK808 - New driver for HiSilicon Hi6421 PMIC - New driver for Qualcomm SPMI PMICs - Add support for Intel Braswell in lpc_ich - Add support for Intel 9 Series PCH in lpc_ich - Add support for Intel Quark ILB in lpc_sch" [ Delayed to after the poweer/reset pull due to Kconfig problems with recursive Kconfig select/depends-on chains. - Linus ] * tag 'mfd-for-linus-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (79 commits) mfd: cros_ec: wait for completion of commands that return IN_PROGRESS i2c: i2c-cros-ec-tunnel: Set retries to 3 mfd: cros_ec: move locking into cros_ec_cmd_xfer mfd: cros_ec: stop calling ->cmd_xfer() directly mfd: cros_ec: Delay for 50ms when we see EC_CMD_REBOOT_EC MAINTAINERS: Adds Andreas Werner to maintainers list for MEN F21BMC mfd: arizona: Correct mask to allow setting micbias external cap mfd: Add ACPI support Revert "mfd: wm5102: Manually apply register patch" mfd: ti_am335x_tscadc: Update logic in CTRL register for 5-wire TS mfd: dt-bindings: atmel-gpbr: Rename doc file to conform to naming convention mfd: dt-bindings: qcom-pm8xxx: Rename doc file to conform to naming convention mfd: Inherit coherent_dma_mask from parent device mfd: Document DT bindings for Qualcomm SPMI PMICs mfd: Add support for Qualcomm SPMI PMICs mfd: dt-bindings: pm8xxx: Add new compatible string mfd: axp209x: Drop the parent supplies field mfd: twl4030-power: Use 'ti,system-power-controller' as alternative way to support system power off mfd: dt-bindings: twl4030-power: Use the standard property to mark power control mfd: syscon: Add Atmel GPBR DT bindings documention ...
2014-10-15Merge tag 'for-v3.18' of git://git.infradead.org/battery-2.6Linus Torvalds33-249/+1919
Pull power supply and reset updates from Sebastian Reichel: - Initial support for the following chips * max77836 (charger) * max14577 (charger) * bq27742 (battery gauge) * ltc2952 (poweroff) * stih416 (restart) * syscon-reboot (restart) * gpio-restart (restart) - cleanup of power supply core - misc fixes in power supply and reset drivers * tag 'for-v3.18' of git://git.infradead.org/battery-2.6: (48 commits) power: ab8500_fg: Fix build warning Documentation: charger: max14577: Update the date of introducing ABI power: reset: corrections for simple syscon reboot driver Documentation: power: reset: Add documentation for generic SYSCON reboot driver power: reset: Add generic SYSCON register mapped reset bq27x00_battery: Fix flag reading for bq27742 power: reset: use restart_notifier mechanism for msm-poweroff power: Add simple gpio-restart driver power: reset: st: Provide DT bindings for ST's Power Reset driver power: reset: Add restart functionality for STiH41x platforms power: charger-manager: Fix NULL pointer exception with missing cm-fuel-gauge power: max14577: Fix circular config SYSFS dependency power: gpio-charger: do not use gpio value directly power: max8925: Use of_get_child_by_name power: max8925: Fix NULL ptr dereference on memory allocation failure bq27x00_battery: Add support to bq27742 Documentation: charger: max14577: Document exported sysfs entry devicetree: mfd: max14577: Add device tree bindings document power: max17040: Add ID for MAX77836 Fuel Gauge block charger: max14577: Configure battery-dependent settings from DTS and sysfs ... Conflicts: drivers/power/reset/Kconfig drivers/power/reset/Makefile
2014-10-15Merge branch 'for-linus' of ↵Linus Torvalds25-623/+948
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "There is the long-awaited discard support for RBD (Guangliang Zhao, Josh Durgin), a pile of RBD bug fixes that didn't belong in late -rc's (Ilya Dryomov, Li RongQing), a pile of fs/ceph bug fixes and performance and debugging improvements (Yan, Zheng, John Spray), and a smattering of cleanups (Chao Yu, Fabian Frederick, Joe Perches)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits) ceph: fix divide-by-zero in __validate_layout() rbd: rbd workqueues need a resque worker libceph: ceph-msgr workqueue needs a resque worker ceph: fix bool assignments libceph: separate multiple ops with commas in debugfs output libceph: sync osd op definitions in rados.h libceph: remove redundant declaration ceph: additional debugfs output ceph: export ceph_session_state_name function ceph: include the initial ACL in create/mkdir/mknod MDS requests ceph: use pagelist to present MDS request data libceph: reference counting pagelist ceph: fix llistxattr on symlink ceph: send client metadata to MDS ceph: remove redundant code for max file size verification ceph: remove redundant io_iter_advance() ceph: move ceph_find_inode() outside the s_mutex ceph: request xattrs if xattr_version is zero rbd: set the remaining discard properties to enable support rbd: use helpers to handle discard for layered images correctly ...
2014-10-15Merge branch 'CVE-2014-7970' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux Pull pivot_root() fix from Andy Lutomirski. Prevent a leak of unreachable mounts. * 'CVE-2014-7970' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux: mnt: Prevent pivot_root from creating a loop in the mount tree
2014-10-15mnt: Prevent pivot_root from creating a loop in the mount treeEric W. Biederman1-0/+3
Andy Lutomirski recently demonstrated that when chroot is used to set the root path below the path for the new ``root'' passed to pivot_root the pivot_root system call succeeds and leaks mounts. In examining the code I see that starting with a new root that is below the current root in the mount tree will result in a loop in the mount tree after the mounts are detached and then reattached to one another. Resulting in all kinds of ugliness including a leak of that mounts involved in the leak of the mount loop. Prevent this problem by ensuring that the new mount is reachable from the current root of the mount tree. [Added stable cc. Fixes CVE-2014-7970. --Andy] Cc: stable@vger.kernel.org Reported-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/87bnpmihks.fsf@x220.int.ebiederm.org Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2014-10-14ceph: fix divide-by-zero in __validate_layout()Yan, Zheng1-1/+1
The 'stripe_unit' field is 64 bits, casting it to 32 bits can result zero. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14rbd: rbd workqueues need a resque workerIlya Dryomov1-1/+2
Need to use WQ_MEM_RECLAIM for our workqueues to prevent I/O lockups under memory pressure - we sit on the memory reclaim path. Cc: stable@vger.kernel.org # 3.17, needs backporting for 3.16 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Tested-by: Micha Krause <micha@krausam.de> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: ceph-msgr workqueue needs a resque workerIlya Dryomov1-1/+5
Commit f363e45fd118 ("net/ceph: make ceph_msgr_wq non-reentrant") effectively removed WQ_MEM_RECLAIM flag from ceph_msgr_wq. This is wrong - libceph is very much a memory reclaim path, so restore it. Cc: stable@vger.kernel.org # needs backporting for < 3.12 Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Tested-by: Micha Krause <micha@krausam.de> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14ceph: fix bool assignmentsFabian Frederick1-13/+13
Fix some coccinelle warnings: fs/ceph/caps.c:2400:6-10: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2401:6-15: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2402:6-17: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2403:6-22: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2404:6-22: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2405:6-19: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2440:4-20: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2469:3-16: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2490:2-18: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2519:3-7: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2549:3-12: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2575:2-6: WARNING: Assignment of bool to 0/1 fs/ceph/caps.c:2589:3-7: WARNING: Assignment of bool to 0/1 Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-14libceph: separate multiple ops with commas in debugfs outputIlya Dryomov1-1/+2
For requests with multiple ops, separate ops with commas instead of \t, which is a field separator here. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: sync osd op definitions in rados.hIlya Dryomov3-228/+137
Bring in missing osd ops and strings, use macros to eliminate multiple points of maintenance. Signed-off-by: Ilya Dryomov <idryomov@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: remove redundant declarationFabian Frederick1-1/+0
ceph_release_page_vector was defined twice in libceph.h Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Ilya Dryomov <idryomov@redhat.com>
2014-10-14ceph: additional debugfs outputJohn Spray2-0/+47
MDS session state and client global ID is useful instrumentation when testing. Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14ceph: export ceph_session_state_name functionJohn Spray2-7/+9
...so that it can be used from the ceph debugfs code when dumping session info. Signed-off-by: John Spray <john.spray@redhat.com>
2014-10-14ceph: include the initial ACL in create/mkdir/mknod MDS requestsYan, Zheng4-47/+170
Current code set new file/directory's initial ACL in a non-atomic manner. Client first sends request to MDS to create new file/directory, then set the initial ACL after the new file/directory is successfully created. The fix is include the initial ACL in create/mkdir/mknod MDS requests. So MDS can handle creating file/directory and setting the initial ACL in one request. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14ceph: use pagelist to present MDS request dataYan, Zheng3-39/+28
Current code uses page array to present MDS request data. Pages in the array are allocated/freed by caller of ceph_mdsc_do_request(). If request is interrupted, the pages can be freed while they are still being used by the request message. The fix is use pagelist to present MDS request data. Pagelist is reference counted. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: reference counting pagelistYan, Zheng4-7/+10
this allow pagelist to present data that may be sent multiple times. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14ceph: fix llistxattr on symlinkYan, Zheng1-2/+1
only regular file and directory have vxattrs. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14ceph: send client metadata to MDSJohn Spray1-1/+70
Implement version 2 of CEPH_MSG_CLIENT_SESSION syntax, which includes additional client metadata to allow the MDS to report on clients by user-sensible names like hostname. Signed-off-by: John Spray <john.spray@redhat.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-10-14ceph: remove redundant code for max file size verificationChao Yu2-15/+0
Both ceph_update_writeable_page and ceph_setattr will verify file size with max size ceph supported. There are two caller for ceph_update_writeable_page, ceph_write_begin and ceph_page_mkwrite. For ceph_write_begin, we have already verified the size in generic_write_checks of ceph_write_iter; for ceph_page_mkwrite, we have no chance to change file size when mmap. Likewise we have already verified the size in inode_change_ok when we call ceph_setattr. So let's remove the redundant code for max file size verification. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Reviewed-by: Yan, Zheng <zyan@redhat.com>
2014-10-14ceph: remove redundant io_iter_advance()Yan, Zheng1-1/+0
ceph_sync_read and generic_file_read_iter() have already advanced the IO iterator. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14ceph: move ceph_find_inode() outside the s_mutexYan, Zheng2-8/+10
ceph_find_inode() may wait on freeing inode, using it inside the s_mutex may cause deadlock. (the freeing inode is waiting for OSD read reply, but dispatch thread is blocked by the s_mutex) Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14ceph: request xattrs if xattr_version is zeroYan, Zheng5-30/+20
Following sequence of events can happen. - Client releases an inode, queues cap release message. - A 'lookup' reply brings the same inode back, but the reply doesn't contain xattrs because MDS didn't receive the cap release message and thought client already has up-to-data xattrs. The fix is force sending a getattr request to MDS if xattrs_version is 0. The getattr mask is set to CEPH_STAT_CAP_XATTR, so MDS knows client does not have xattr. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14rbd: set the remaining discard properties to enable supportJosh Durgin1-0/+2
max_discard_sectors must be set for the queue to support discard. Operations implementing discard for rbd zero data, so report that. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: use helpers to handle discard for layered images correctlyJosh Durgin1-32/+22
Only allocate two osd ops for discard requests, since the preallocation hint is only added for regular writes. Use rbd_img_obj_request_fill() to recreate the original write or discard osd operations, isolating that logic to one place, and change the assert in rbd_osd_req_create_copyup() to accept discard requests as well. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: extract a method for adding object operationsJosh Durgin1-55/+78
rbd_img_request_fill() creates a ceph_osd_request and has logic for adding the appropriate osd ops to it based on the request type and image properties. For layered images, the original rbd_obj_request is resent with a copyup operation in front, using a new ceph_osd_request. The logic for adding the original operations should be the same as when first sending them, so move it to a helper function. op_type only needs to be checked once, so create a helper for that as well and call it outside the loop in rbd_img_request_fill(). Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: make discard trigger copy-on-writeJosh Durgin1-1/+2
Discard requests are a form of write, so they should go through the same process as plain write requests and trigger copy-on-write for layered images. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: tolerate -ENOENT for discard operationsJosh Durgin1-0/+3
Discard may try to delete an object from a non-layered image that does not exist. If this occurs, the image already has no data in that range, so change the result to success. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: fix snapshot context reference count for discardsJosh Durgin1-1/+2
Discards take a reference to the snapshot context of an image when they are created. This reference needs to be cleaned up when the request is done just as it is for regular writes. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: read image size for discard check safelyJosh Durgin1-6/+12
In rbd_img_request_fill() the image size is only checked to determine whether we can truncate an object instead of zeroing it for discard requests. Take rbd_dev->header_rwsem while reading the image size, and move this read into the discard check, so that non-discard ops don't need to take the semaphore in this function. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: initial discard bits from Guangliang ZhaoGuangliang Zhao1-15/+89
This patch add the discard support for rbd driver. There are three types operation in the driver: 1. The objects would be removed if they completely contained within the discard range. 2. The objects would be truncated if they partly contained within the discard range, and align with their boundary. 3. Others would be zeroed. A discard request from blkdev_issue_discard() is defined which REQ_WRITE and REQ_DISCARD both marked and no data, so we must check the REQ_DISCARD first when getting the request type. This resolve: http://tracker.ceph.com/issues/190 [ Ilya Dryomov: This is incomplete and somewhat buggy, see follow up commits by Josh Durgin for refinements and fixes which weren't folded in to preserve authorship. ] Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14rbd: extend the operation typeGuangliang Zhao1-34/+63
It could only handle the read and write operations now, extend it for the coming discard support. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14rbd: skip the copyup when an entire object writingGuangliang Zhao1-0/+8
It need to copyup the parent's content when layered writing, but an entire object write would overwrite it, so skip it. Signed-off-by: Guangliang Zhao <lucienchao@gmail.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14rbd: add img_obj_request_simple() helperIlya Dryomov1-16/+28
To clarify the conditions and make it easier to add new ones. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14rbd: access snapshot context and mapping size safelyJosh Durgin1-13/+21
These fields may both change while the image is mapped if a snapshot is created or deleted or the image is resized. They are guarded by rbd_dev->header_rwsem, so hold that while reading them, and store a local copy to refer to outside of the critical section. The local copy will stay consistent since the snapshot context is reference counted, and the mapping size is just a u64. This prevents torn loads from giving us inconsistent values. Move reading header.snapc into the caller of rbd_img_request_create() so that we only need to take the semaphore once. The read-only caller, rbd_parent_request_create() can just pass NULL for snapc, since the snapshot context is only relevant for writes. Signed-off-by: Josh Durgin <josh.durgin@inktank.com>
2014-10-14rbd: do not return -ERANGE on auth failuresIlya Dryomov1-3/+1
Trying to map an image out of a pool for which we don't have an 'x' permission bit fails with -ERANGE from ceph_extract_encoded_string() due to an unsigned vs signed bug. Fix it and get rid of the -EINVAL sink, thus propagating rbd::get_id cls method errors. (I've seen a bunch of unexplained -ERANGE reports, I bet this is it). Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14libceph: don't try checking queue_work() return valueIlya Dryomov1-10/+5
queue_work() doesn't "fail to queue", it returns false if work was already on a queue, which can't happen here since we allocate event_work right before we queue it. So don't bother at all. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14ceph: make sure request isn't in any waiting list when kicking request.Yan, Zheng1-0/+1
we may corrupt waiting list if a request in the waiting list is kicked. Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14ceph: protect kick_requests() with mdsc->mutexYan, Zheng1-2/+3
Signed-off-by: Yan, Zheng <zyan@redhat.com> Reviewed-by: Sage Weil <sage@redhat.com>
2014-10-14libceph: Convert pr_warning to pr_warnJoe Perches5-37/+39
Use the more common pr_warn. Other miscellanea: o Coalesce formats o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14ceph: trim unused inodes before reconnecting to recovering MDSYan, Zheng1-10/+13
So the recovering MDS does not need to fetch these ununsed inodes during cache rejoin. This may reduce MDS recovery time. Signed-off-by: Yan, Zheng <zyan@redhat.com>
2014-10-14libceph: fix a use after free issue in osdmap_set_max_osdLi RongQing1-16/+16
If the state variable is krealloced successfully, map->osd_state will be freed, once following two reallocation failed, and exit the function without resetting map->osd_state, map->osd_state become a wild pointer. fix it by resetting them after krealloc successfully. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14libceph: select CRYPTO_CBC in addition to CRYPTO_AESIlya Dryomov1-0/+1
We want "cbc(aes)" algorithm, so select CRYPTO_CBC too, not just CRYPTO_AES. Otherwise on !CRYPTO_CBC kernels we fail rbd map/mount with libceph: error -2 building auth method x request Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com>
2014-10-14libceph: resend lingering requests with a new tidIlya Dryomov1-19/+54
Both not yet registered (r_linger && list_empty(&r_linger_item)) and registered linger requests should use the new tid on resend to avoid the dup op detection logic on the OSDs, yet we were doing this only for "registered" case. Factor out and simplify the "registered" logic and use the new helper for "not registered" case as well. Fixes: http://tracker.ceph.com/issues/8806 Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14libceph: abstract out ceph_osd_request enqueue logicIlya Dryomov1-7/+17
Introduce __enqueue_request() and switch to it. Signed-off-by: Ilya Dryomov <ilya.dryomov@inktank.com> Reviewed-by: Alex Elder <elder@linaro.org>
2014-10-14crypto: LLVMLinux: Remove VLAIS usage from crypto/testmgr.cJan-Simon Möller1-8/+6
Replaced the use of a Variable Length Array In Struct (VLAIS) with a C99 compliant equivalent. This patch allocates the appropriate amount of memory using a char array using the SHASH_DESC_ON_STACK macro. The new code can be compiled with both gcc and clang. Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de> Signed-off-by: Behan Webster <behanw@converseincode.com> Reviewed-by: Mark Charlebois <charlebm@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Cc: pageexec@freemail.hu