summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-12-02Linux 4.4.36v4.4.36Greg Kroah-Hartman1-1/+1
2016-12-02scsi: mpt3sas: Unblock device after controller resetSuganath Prabu S1-5/+8
commit 7ff723ad0f87feba43dda45fdae71206063dd7d4 upstream. While issuing any ATA passthrough command to firmware the driver will block the device. But it will unblock the device only if the I/O completes through the ISR path. If a controller reset occurs before command completion the device will remain in blocked state. Make sure we unblock the device following a controller reset if an ATA passthrough command was queued. [mkp: clarified patch description] Fixes: ac6c2a93bd07 ("mpt3sas: Fix for SATA drive in blocked state, after diag reset") Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02flow_dissect: call init_default_flow_dissectors() earlierEric Dumazet1-1/+1
commit c9b8af1330198ae241cd545e1f040019010d44d9 upstream. Andre Noll reported panics after my recent fix (commit 34fad54c2537 "net: __skb_flow_dissect() must cap its return value") After some more headaches, Alexander root caused the problem to init_default_flow_dissectors() being called too late, in case a network driver like IGB is not a module and receives DHCP message very early. Fix is to call init_default_flow_dissectors() much earlier, as it is a core infrastructure and does not depend on another kernel service. Fixes: 06635a35d13d4 ("flow_dissect: use programable dissector in skb_flow_dissect and friends") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andre Noll <maan@tuebingen.mpg.de> Diagnosed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02mei: fix return value on disconnectionTomas Winkler2-2/+2
commit 2d4d5481e2d6f93b25fcfb13a9f20bbfbf54266a upstream. Correct errno on client disconnection is -ENODEV not -EBUSY Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02mei: me: fix place for kaby point device ids.Tomas Winkler1-3/+4
This is fix of the backported patch only, it places KBL DIDs on correct place to easy on backporting of further DIDs. Fixes: 5c99f32c461c ('mei: me: add kaby point device ids') Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02mei: me: disable driver on SPT SPS firmwareTomas Winkler2-4/+10
commit 8c57cac1457f3125a5d13dc03635c0708c61bff0 upstream. Sunrise Point PCH with SPS Firmware doesn't expose working MEI interface, we need to quirk it out. The SPS Firmware is identifiable only on the first PCI function of the device. Tested-by: Sujith Pandel <sujith_pandel@dell.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02drm/radeon: Ensure vblank interrupt is enabled on DPMS transition to onMichel Dänzer2-0/+4
NOTE: This patch only applies to 4.5.y or older kernels. With newer kernels, this problem cannot happen because the driver now uses drm_crtc_vblank_on/off instead of drm_vblank_pre/post_modeset[0]. I consider this patch safer for older kernels than backporting the API change, because drm_crtc_vblank_on/off had various issues in older kernels, and I'm not sure all fixes for those have been backported to all stable branches where this patch could be applied. --------------------- Fixes the vblank interrupt being disabled when it should be on, which can cause at least the following symptoms: * Hangs when running 'xset dpms force off' in a GNOME session with gnome-shell using DRI2. * RandR 1.4 slave outputs freezing with garbage displayed using xf86-video-ati 7.8.0 or newer. [0] See upstream commit: commit 777e3cbc791f131806d9bf24b3325637c7fc228d Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Jan 21 11:08:57 2016 +0100 drm/radeon: Switch to drm_vblank_on/off Reported-and-Tested-by: Max Staudt <mstaudt@suse.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2016-12-02mpi: Fix NULL ptr dereference in mpi_powm() [ver #3]Andrey Ryabinin1-1/+6
commit f5527fffff3f002b0a6b376163613b82f69de073 upstream. This fixes CVE-2016-8650. If mpi_powm() is given a zero exponent, it wants to immediately return either 1 or 0, depending on the modulus. However, if the result was initalised with zero limb space, no limbs space is allocated and a NULL-pointer exception ensues. Fix this by allocating a minimal amount of limb space for the result when the 0-exponent case when the result is 1 and not touching the limb space when the result is 0. This affects the use of RSA keys and X.509 certificates that carry them. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 PGD 0 Oops: 0002 [#1] SMP Modules linked in: CPU: 3 PID: 3014 Comm: keyctl Not tainted 4.9.0-rc6-fscache+ #278 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 task: ffff8804011944c0 task.stack: ffff880401294000 RIP: 0010:[<ffffffff8138ce5d>] [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP: 0018:ffff880401297ad8 EFLAGS: 00010212 RAX: 0000000000000000 RBX: ffff88040868bec0 RCX: ffff88040868bba0 RDX: ffff88040868b260 RSI: ffff88040868bec0 RDI: ffff88040868bee0 RBP: ffff880401297ba8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000047 R11: ffffffff8183b210 R12: 0000000000000000 R13: ffff8804087c7600 R14: 000000000000001f R15: ffff880401297c50 FS: 00007f7a7918c700(0000) GS:ffff88041fb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000401250000 CR4: 00000000001406e0 Stack: ffff88040868bec0 0000000000000020 ffff880401297b00 ffffffff81376cd4 0000000000000100 ffff880401297b10 ffffffff81376d12 ffff880401297b30 ffffffff81376f37 0000000000000100 0000000000000000 ffff880401297ba8 Call Trace: [<ffffffff81376cd4>] ? __sg_page_iter_next+0x43/0x66 [<ffffffff81376d12>] ? sg_miter_get_next_page+0x1b/0x5d [<ffffffff81376f37>] ? sg_miter_next+0x17/0xbd [<ffffffff8138ba3a>] ? mpi_read_raw_from_sgl+0xf2/0x146 [<ffffffff8132a95c>] rsa_verify+0x9d/0xee [<ffffffff8132acca>] ? pkcs1pad_sg_set_buf+0x2e/0xbb [<ffffffff8132af40>] pkcs1pad_verify+0xc0/0xe1 [<ffffffff8133cb5e>] public_key_verify_signature+0x1b0/0x228 [<ffffffff8133d974>] x509_check_for_self_signed+0xa1/0xc4 [<ffffffff8133cdde>] x509_cert_parse+0x167/0x1a1 [<ffffffff8133d609>] x509_key_preparse+0x21/0x1a1 [<ffffffff8133c3d7>] asymmetric_key_preparse+0x34/0x61 [<ffffffff812fc9f3>] key_create_or_update+0x145/0x399 [<ffffffff812fe227>] SyS_add_key+0x154/0x19e [<ffffffff81001c2b>] do_syscall_64+0x80/0x191 [<ffffffff816825e4>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 56 41 55 41 54 53 48 81 ec a8 00 00 00 44 8b 71 04 8b 42 04 4c 8b 67 18 45 85 f6 89 45 80 0f 84 b4 06 00 00 85 c0 75 2f 41 ff ce <49> c7 04 24 01 00 00 00 b0 01 75 0b 48 8b 41 18 48 83 38 01 0f RIP [<ffffffff8138ce5d>] mpi_powm+0x32/0x7e6 RSP <ffff880401297ad8> CR2: 0000000000000000 ---[ end trace d82015255d4a5d8d ]--- Basically, this is a backport of a libgcrypt patch: http://git.gnupg.org/cgi-bin/gitweb.cgi?p=libgcrypt.git;a=patch;h=6e1adb05d290aeeb1c230c763970695f4a538526 Fixes: cdec9cb5167a ("crypto: GnuPG based MPI lib - source files (part 1)") Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> cc: linux-ima-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02parisc: Also flush data TLB in flush_icache_page_asmJohn David Anglin1-15/+22
commit 5035b230e7b67ac12691ed3b5495bbb617027b68 upstream. This is the second issue I noticed in reviewing the parisc TLB code. The fic instruction may use either the instruction or data TLB in flushing the instruction cache. Thus, on machines with a split TLB, we should also flush the data TLB after setting up the temporary alias registers. Although this has no functional impact, I changed the pdtlb and pitlb instructions to consistently use the index register %r0. These instructions do not support integer displacements. Tested on rp3440 and c8000. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02parisc: Fix race in pci-dma.cJohn David Anglin1-1/+1
commit c0452fb9fb8f49c7d68ab9fa0ad092016be7b45f upstream. We are still troubled by occasional random segmentation faults and memory memory corruption on SMP machines. The causes quite a few package builds to fail on the Debian buildd machines for parisc. When gcc-6 failed to build three times in a row, I looked again at the TLB related code. I found a couple of issues. This is the first. In general, we need to ensure page table updates and corresponding TLB purges are atomic. The attached patch fixes an instance in pci-dma.c where the page table update was not guarded by the TLB lock. Tested on rp3440 and c8000. So far, no further random segmentation faults have been observed. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02parisc: Fix races in parisc_setup_cache_timing()John David Anglin2-19/+16
commit 741dc7bf1c7c7d93b853bb55efe77baa27e1b0a9 upstream. Helge reported to me the following startup crash: [ 0.000000] Linux version 4.8.0-1-parisc64-smp (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (GCC) ) #1 SMP Debian 4.8.7-1 (2016-11-13) [ 0.000000] The 64-bit Kernel has started... [ 0.000000] Kernel default page size is 4 KB. Huge pages enabled with 1 MB physical and 2 MB virtual size. [ 0.000000] Determining PDC firmware type: System Map. [ 0.000000] model 9000/785/J5000 [ 0.000000] Total Memory: 2048 MB [ 0.000000] Memory: 2018528K/2097152K available (9272K kernel code, 3053K rwdata, 1319K rodata, 1024K init, 840K bss, 78624K reserved, 0K cma-reserved) [ 0.000000] virtual kernel memory layout: [ 0.000000] vmalloc : 0x0000000000008000 - 0x000000003f000000 (1007 MB) [ 0.000000] memory : 0x0000000040000000 - 0x00000000c0000000 (2048 MB) [ 0.000000] .init : 0x0000000040100000 - 0x0000000040200000 (1024 kB) [ 0.000000] .data : 0x0000000040b0e000 - 0x0000000040f533e0 (4372 kB) [ 0.000000] .text : 0x0000000040200000 - 0x0000000040b0e000 (9272 kB) [ 0.768910] Brought up 1 CPUs [ 0.992465] NET: Registered protocol family 16 [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 [ 3.000419] _______________________________ [ 3.000419] < Your System ate a SPARC! Gah! > [ 3.000419] ------------------------------- [ 3.000419] \ ^__^ [ 3.000419] (__)\ )\/\ [ 3.000419] U ||----w | [ 3.000419] || || [ 9.340055] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 9.448082] task: 00000000bfd48060 task.stack: 00000000bfd50000 [ 9.528040] [ 10.760029] IASQ: 0000000000000000 0000000000000000 IAOQ: 000000004025d154 000000004025d158 [ 10.868052] IIR: 43ffff80 ISR: 0000000000340000 IOR: 000001ff54150960 [ 10.960029] CPU: 1 CR30: 00000000bfd50000 CR31: 0000000011111111 [ 11.052057] ORIG_R28: 000000004021e3b4 [ 11.100045] IAOQ[0]: irq_exit+0x94/0x120 [ 11.152062] IAOQ[1]: irq_exit+0x98/0x120 [ 11.208031] RP(r2): irq_exit+0xb8/0x120 [ 11.256074] Backtrace: [ 11.288067] [<00000000402cd944>] cpu_startup_entry+0x1e4/0x598 [ 11.368058] [<0000000040109528>] smp_callin+0x2c0/0x2f0 [ 11.436308] [<00000000402b53fc>] update_curr+0x18c/0x2d0 [ 11.508055] [<00000000402b73b8>] dequeue_entity+0x2c0/0x1030 [ 11.584040] [<00000000402b3cc0>] set_next_entity+0x80/0xd30 [ 11.660069] [<00000000402c1594>] pick_next_task_fair+0x614/0x720 [ 11.740085] [<000000004020dd34>] __schedule+0x394/0xa60 [ 11.808054] [<000000004020e488>] schedule+0x88/0x118 [ 11.876039] [<0000000040283d3c>] rescuer_thread+0x4d4/0x5b0 [ 11.948090] [<000000004028fc4c>] kthread+0x1ec/0x248 [ 12.016053] [<0000000040205020>] end_fault_vector+0x20/0xc0 [ 12.092239] [<00000000402050c0>] _switch_to_ret+0x0/0xf40 [ 12.164044] [ 12.184036] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-1-parisc64-smp #1 Debian 4.8.7-1 [ 12.244040] Backtrace: [ 12.244040] [<000000004021c480>] show_stack+0x68/0x80 [ 12.244040] [<00000000406f332c>] dump_stack+0xec/0x168 [ 12.244040] [<000000004021c74c>] die_if_kernel+0x25c/0x430 [ 12.244040] [<000000004022d320>] handle_unaligned+0xb48/0xb50 [ 12.244040] [ 12.632066] ---[ end trace 9ca05a7215c7bbb2 ]--- [ 12.692036] Kernel panic - not syncing: Attempted to kill the idle task! We have the insn 0x43ffff80 in IIR but from IAOQ we should have: 4025d150: 0f f3 20 df ldd,s r19(r31),r31 4025d154: 0f 9f 00 9c ldw r31(ret0),ret0 4025d158: bf 80 20 58 cmpb,*<> r0,ret0,4025d18c <irq_exit+0xcc> Cpu0 has just completed running parisc_setup_cache_timing: [ 2.429981] Releasing cpu 1 now, hpa=fffffffffffa2000 [ 2.635751] CPU(s): 2 out of 2 PA8500 (PCX-W) at 440.000000 MHz online [ 2.726692] Setting cache flush threshold to 1024 kB [ 2.729932] Not-handled unaligned insn 0x43ffff80 [ 2.798114] Setting TLB flush threshold to 140 kB [ 2.928039] Unaligned handler failed, ret = -1 From the backtrace, cpu1 is in smp_callin: void __init smp_callin(void) { int slave_id = cpu_now_booting; smp_cpu_init(slave_id); preempt_disable(); flush_cache_all_local(); /* start with known state */ flush_tlb_all_local(NULL); local_irq_enable(); /* Interrupts have been off until now */ cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); So, it has just flushed its caches and the TLB. It would seem either the flushes in parisc_setup_cache_timing or smp_callin have corrupted kernel memory. The attached patch reworks parisc_setup_cache_timing to remove the races in setting the cache and TLB flush thresholds. It also corrects the number of bytes flushed in the TLB calculation. The patch flushes the cache and TLB on cpu0 before starting the secondary processors so that they are started from a known state. Tested with a few reboots on c8000. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02NFSv4.x: hide array-bounds warningArnd Bergmann1-1/+1
commit d55b352b01bc78fbc3d1bb650140668b87e58bf9 upstream. A correct bugfix introduced a harmless warning that shows up with gcc-7: fs/nfs/callback.c: In function 'nfs_callback_up': fs/nfs/callback.c:214:14: error: array subscript is outside array bounds [-Werror=array-bounds] What happens here is that the 'minorversion == 0' check tells the compiler that we assume minorversion can be something other than 0, but when CONFIG_NFS_V4_1 is disabled that would be invalid and result in an out-of-bounds access. The added check for IS_ENABLED(CONFIG_NFS_V4_1) tells gcc that this really can't happen, which makes the code slightly smaller and also avoids the warning. The bugfix that introduced the warning is marked for stable backports, we want this one backported to the same releases. Fixes: 98b0f80c2396 ("NFSv4.x: Fix a refcount leak in nfs_callback_up_net") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02apparmor: fix change_hat not finding hat after policy replacementJohn Johansen1-2/+4
commit 3d40658c977769ce2138f286cf131537bf68bdfe upstream. After a policy replacement, the task cred may be out of date and need to be updated. However change_hat is using the stale profiles from the out of date cred resulting in either: a stale profile being applied or, incorrect failure when searching for a hat profile as it has been migrated to the new parent profile. Fixes: 01e2b670aa898a39259bc85c78e3d74820f4d3b6 (failure to find hat) Fixes: 898127c34ec03291c86f4ff3856d79e9e18952bc (stale policy being applied) Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1000287 Signed-off-by: John Johansen <john.johansen@canonical.com> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02cfg80211: limit scan results cache sizeJohannes Berg2-0/+70
commit 9853a55ef1bb66d7411136046060bbfb69c714fa upstream. It's possible to make scanning consume almost arbitrary amounts of memory, e.g. by sending beacon frames with random BSSIDs at high rates while somebody is scanning. Limit the number of BSS table entries we're willing to cache to 1000, limiting maximum memory usage to maybe 4-5MB, but lower in practice - that would be the case for having both full-sized beacon and probe response frames for each entry; this seems not possible in practice, so a limit of 1000 entries will likely be closer to 0.5 MB. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02tile: avoid using clocksource_cyc2ns with absolute cycle countChris Metcalf1-2/+2
commit e658a6f14d7c0243205f035979d0ecf6c12a036f upstream. For large values of "mult" and long uptimes, the intermediate result of "cycles * mult" can overflow 64 bits. For example, the tile platform calls clocksource_cyc2ns with a 1.2 GHz clock; we have mult = 853, and after 208.5 days, we overflow 64 bits. Since clocksource_cyc2ns() is intended to be used for relative cycle counts, not absolute cycle counts, performance is more importance than accepting a wider range of cycle values. So, just use mult_frac() directly in tile's sched_clock(). Commit 4cecf6d401a0 ("sched, x86: Avoid unnecessary overflow in sched_clock") by Salman Qazi results in essentially the same generated code for x86 as this change does for tile. In fact, a follow-on change by Salman introduced mult_frac() and switched to using it, so the C code was largely identical at that point too. Peter Zijlstra then added mul_u64_u32_shr() and switched x86 to use it. This is, in principle, better; by optimizing the 64x64->64 multiplies to be 32x32->64 multiplies we can potentially save some time. However, the compiler piplines the 64x64->64 multiplies pretty well, and the conditional branch in the generic mul_u64_u32_shr() causes some bubbles in execution, with the result that it's pretty much a wash. If tilegx provided its own implementation of mul_u64_u32_shr() without the conditional branch, we could potentially save 3 cycles, but that seems like small gain for a fair amount of additional build scaffolding; no other platform currently provides a mul_u64_u32_shr() override, and tile doesn't currently have an <asm/div64.h> header to put the override in. Additionally, gcc currently has an optimization bug that prevents it from recognizing the opportunity to use a 32x32->64 multiply, and so the result would be no better than the existing mult_frac() until such time as the compiler is fixed. For now, just using mult_frac() seems like the right answer. Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02scsi: mpt3sas: Fix secure erase premature terminationAndrey Grodzovsky1-1/+14
commit 18f6084a989ba1b38702f9af37a2e4049a924be6 upstream. This is a work around for a bug with LSI Fusion MPT SAS2 when perfoming secure erase. Due to the very long time the operation takes, commands issued during the erase will time out and will trigger execution of the abort hook. Even though the abort hook is called for the specific command which timed out, this leads to entire device halt (scsi_state terminated) and premature termination of the secure erase. Set device state to busy while ATA passthrough commands are in progress. [mkp: hand applied to 4.9/scsi-fixes, tweaked patch description] Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: <linux-scsi@vger.kernel.org> Cc: Sathya Prakash <sathya.prakash@broadcom.com> Cc: Chaitra P B <chaitra.basappa@broadcom.com> Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com> Cc: Sreekanth Reddy <Sreekanth.Reddy@broadcom.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02Fix USB CB/CBI storage devices with CONFIG_VMAP_STACK=yPetr Vandrovec1-1/+6
commit 2ce9d2272b98743b911196c49e7af5841381c206 upstream. Some code (all error handling) submits CDBs that are allocated on the stack. This breaks with CB/CBI code that tries to create URB directly from SCSI command buffer - which happens to be in vmalloced memory with vmalloced kernel stacks. Let's make copy of the command in usb_stor_CB_transport. Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02USB: serial: ftdi_sio: add support for TI CC3200 LaunchPadDoug Brown2-0/+8
commit 9bfef729a3d11f04d12788d749a3ce6b47645734 upstream. This patch adds support for the TI CC3200 LaunchPad board, which uses a custom USB vendor ID and product ID. Channel A is used for JTAG, and channel B is used for a UART. Signed-off-by: Doug Brown <doug@schmorgal.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02USB: serial: cp210x: add ID for the Zone DPMXPaul Jakma1-0/+1
commit 2ab13292d7a314fa45de0acc808e41aaad31989c upstream. The BRIM Brothers Zone DPMX is a bicycle powermeter. This ID is for the USB serial interface in its charging dock for the control pods, via which some settings for the pods can be modified. Signed-off-by: Paul Jakma <paul@jakma.org> Cc: Barry Redmond <barry@brimbrothers.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02usb: chipidea: move the lock initialization to core filePeter Chen2-2/+1
commit a5d906bb261cde5f881a949d3b0fbaa285dcc574 upstream. This can fix below dump when the lock is accessed at host mode due to it is not initialized. [ 46.119638] INFO: trying to register non-static key. [ 46.124643] the code is fine but needs lockdep annotation. [ 46.130144] turning off the locking correctness validator. [ 46.135659] CPU: 0 PID: 690 Comm: cat Not tainted 4.9.0-rc3-00079-g4b75f1d #1210 [ 46.143075] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 46.148923] Backtrace: [ 46.151448] [<c010c460>] (dump_backtrace) from [<c010c658>] (show_stack+0x18/0x1c) [ 46.159038] r7:edf52000 [ 46.161412] r6:60000193 [ 46.163967] r5:00000000 [ 46.165035] r4:c0e25c2c [ 46.169109] [<c010c640>] (show_stack) from [<c03f58a4>] (dump_stack+0xb4/0xe8) [ 46.176362] [<c03f57f0>] (dump_stack) from [<c016d690>] (register_lock_class+0x4fc/0x56c) [ 46.184554] r10:c0e25d24 [ 46.187014] r9:edf53e70 [ 46.189569] r8:c1642444 [ 46.190637] r7:ee9da024 [ 46.193191] r6:00000000 [ 46.194258] r5:00000000 [ 46.196812] r4:00000000 [ 46.199185] r3:00000001 [ 46.203259] [<c016d194>] (register_lock_class) from [<c0171294>] (__lock_acquire+0x80/0x10f0) [ 46.211797] r10:c0e25d24 [ 46.214257] r9:edf53e70 [ 46.216813] r8:ee9da024 [ 46.217880] r7:c1642444 [ 46.220435] r6:edcd1800 [ 46.221502] r5:60000193 [ 46.224057] r4:00000000 [ 46.227953] [<c0171214>] (__lock_acquire) from [<c01726c0>] (lock_acquire+0x74/0x94) [ 46.235710] r10:00000001 [ 46.238169] r9:edf53e70 [ 46.240723] r8:edf53f80 [ 46.241790] r7:00000001 [ 46.244344] r6:00000001 [ 46.245412] r5:60000193 [ 46.247966] r4:00000000 [ 46.251866] [<c017264c>] (lock_acquire) from [<c096c8fc>] (_raw_spin_lock_irqsave+0x40/0x54) [ 46.260319] r7:ee1c6a00 [ 46.262691] r6:c062a570 [ 46.265247] r5:20000113 [ 46.266314] r4:ee9da014 [ 46.270393] [<c096c8bc>] (_raw_spin_lock_irqsave) from [<c062a570>] (ci_port_test_show+0x2c/0x70) [ 46.279280] r6:eebd2000 [ 46.281652] r5:ee9da010 [ 46.284207] r4:ee9da014 [ 46.286810] [<c062a544>] (ci_port_test_show) from [<c0248d04>] (seq_read+0x1ac/0x4f8) [ 46.294655] r9:edf53e70 [ 46.297028] r8:edf53f80 [ 46.299583] r7:ee1c6a00 [ 46.300650] r6:00000001 [ 46.303205] r5:00000000 [ 46.304273] r4:eebd2000 [ 46.306850] [<c0248b58>] (seq_read) from [<c039e864>] (full_proxy_read+0x54/0x6c) [ 46.314348] r10:00000000 [ 46.316808] r9:c0a6ad30 [ 46.319363] r8:edf53f80 [ 46.320430] r7:00020000 [ 46.322986] r6:b6de3000 [ 46.324053] r5:ee1c6a00 [ 46.326607] r4:c0248b58 [ 46.330505] [<c039e810>] (full_proxy_read) from [<c021ec98>] (__vfs_read+0x34/0x118) [ 46.338262] r9:edf52000 [ 46.340635] r8:c0107fc4 [ 46.343190] r7:00020000 [ 46.344257] r6:edf53f80 [ 46.346812] r5:c039e810 [ 46.347879] r4:ee1c6a00 [ 46.350447] [<c021ec64>] (__vfs_read) from [<c021fbd0>] (vfs_read+0x8c/0x11c) [ 46.357597] r9:edf52000 [ 46.359969] r8:c0107fc4 [ 46.362524] r7:edf53f80 [ 46.363592] r6:b6de3000 [ 46.366147] r5:ee1c6a00 [ 46.367214] r4:00020000 [ 46.369782] [<c021fb44>] (vfs_read) from [<c0220a4c>] (SyS_read+0x4c/0xa8) [ 46.376672] r8:c0107fc4 [ 46.379045] r7:00020000 [ 46.381600] r6:b6de3000 [ 46.382667] r5:ee1c6a00 [ 46.385222] r4:ee1c6a00 [ 46.387817] [<c0220a00>] (SyS_read) from [<c0107e20>] (ret_fast_syscall+0x0/0x1c) [ 46.395314] r7:00000003 [ 46.397687] r6:b6de3000 [ 46.400243] r5:00020000 [ 46.401310] r4:00020000 Fixes: 26c696c678c4 ("USB: Chipidea: rename struct ci13xxx variables from udc to ci") Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02KVM: x86: check for pic and ioapic presence before useRadim Krčmář1-0/+13
commit df492896e6dfb44fd1154f5402428d8e52705081 upstream. Split irqchip allows pic and ioapic routes to be used without them being created, which results in NULL access. Check for NULL and avoid it. (The setup is too racy for a nicer solutions.) Found by syzkaller: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 3 PID: 11923 Comm: kworker/3:2 Not tainted 4.9.0-rc5+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: events irqfd_inject task: ffff88006a06c7c0 task.stack: ffff880068638000 RIP: 0010:[...] [...] __lock_acquire+0xb35/0x3380 kernel/locking/lockdep.c:3221 RSP: 0000:ffff88006863ea20 EFLAGS: 00010006 RAX: dffffc0000000000 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000039 RSI: 0000000000000000 RDI: 1ffff1000d0c7d9e RBP: ffff88006863ef58 R08: 0000000000000001 R09: 0000000000000000 R10: 00000000000001c8 R11: 0000000000000000 R12: ffff88006a06c7c0 R13: 0000000000000001 R14: ffffffff8baab1a0 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff88006d100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004abdd0 CR3: 000000003e2f2000 CR4: 00000000000026e0 Stack: ffffffff894d0098 1ffff1000d0c7d56 ffff88006863ecd0 dffffc0000000000 ffff88006a06c7c0 0000000000000000 ffff88006863ecf8 0000000000000082 0000000000000000 ffffffff815dd7c1 ffffffff00000000 ffffffff00000000 Call Trace: [...] lock_acquire+0x2a2/0x790 kernel/locking/lockdep.c:3746 [...] __raw_spin_lock include/linux/spinlock_api_smp.h:144 [...] _raw_spin_lock+0x38/0x50 kernel/locking/spinlock.c:151 [...] spin_lock include/linux/spinlock.h:302 [...] kvm_ioapic_set_irq+0x4c/0x100 arch/x86/kvm/ioapic.c:379 [...] kvm_set_ioapic_irq+0x8f/0xc0 arch/x86/kvm/irq_comm.c:52 [...] kvm_set_irq+0x239/0x640 arch/x86/kvm/../../../virt/kvm/irqchip.c:101 [...] irqfd_inject+0xb4/0x150 arch/x86/kvm/../../../virt/kvm/eventfd.c:60 [...] process_one_work+0xb40/0x1ba0 kernel/workqueue.c:2096 [...] worker_thread+0x214/0x18a0 kernel/workqueue.c:2230 [...] kthread+0x328/0x3e0 kernel/kthread.c:209 [...] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433 Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 49df6397edfc ("KVM: x86: Split the APIC from the rest of IRQCHIP.") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02KVM: x86: drop error recovery in em_jmp_far and em_ret_farRadim Krčmář1-25/+11
commit 2117d5398c81554fbf803f5fd1dc55eb78216c0c upstream. em_jmp_far and em_ret_far assumed that setting IP can only fail in 64 bit mode, but syzkaller proved otherwise (and SDM agrees). Code segment was restored upon failure, but it was left uninitialized outside of long mode, which could lead to a leak of host kernel stack. We could have fixed that by always saving and restoring the CS, but we take a simpler approach and just break any guest that manages to fail as the error recovery is error-prone and modern CPUs don't need emulator for this. Found by syzkaller: WARNING: CPU: 2 PID: 3668 at arch/x86/kvm/emulate.c:2217 em_ret_far+0x428/0x480 Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 3668 Comm: syz-executor Not tainted 4.9.0-rc4+ #49 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [...] Call Trace: [...] __dump_stack lib/dump_stack.c:15 [...] dump_stack+0xb3/0x118 lib/dump_stack.c:51 [...] panic+0x1b7/0x3a3 kernel/panic.c:179 [...] __warn+0x1c4/0x1e0 kernel/panic.c:542 [...] warn_slowpath_null+0x2c/0x40 kernel/panic.c:585 [...] em_ret_far+0x428/0x480 arch/x86/kvm/emulate.c:2217 [...] em_ret_far_imm+0x17/0x70 arch/x86/kvm/emulate.c:2227 [...] x86_emulate_insn+0x87a/0x3730 arch/x86/kvm/emulate.c:5294 [...] x86_emulate_instruction+0x520/0x1ba0 arch/x86/kvm/x86.c:5545 [...] emulate_instruction arch/x86/include/asm/kvm_host.h:1116 [...] complete_emulated_io arch/x86/kvm/x86.c:6870 [...] complete_emulated_mmio+0x4e9/0x710 arch/x86/kvm/x86.c:6934 [...] kvm_arch_vcpu_ioctl_run+0x3b7a/0x5a90 arch/x86/kvm/x86.c:6978 [...] kvm_vcpu_ioctl+0x61e/0xdd0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2557 [...] vfs_ioctl fs/ioctl.c:43 [...] do_vfs_ioctl+0x18c/0x1040 fs/ioctl.c:679 [...] SYSC_ioctl fs/ioctl.c:694 [...] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:685 [...] entry_SYSCALL_64_fastpath+0x1f/0xc2 Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: d1442d85cc30 ("KVM: x86: Handle errors when RIP is set during far jumps") Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual FunctionsAshok Raj2-1/+16
commit 1c387188c60f53b338c20eee32db055dfe022a9b upstream. The VT-d specification (§8.3.3) says: ‘Virtual Functions’ of a ‘Physical Function’ are under the scope of the same remapping unit as the ‘Physical Function’. The BIOS is not required to list all the possible VFs in the scope tables, and arguably *shouldn't* make any attempt to do so, since there could be a huge number of them. This has been broken basically for ever — the VF is never going to match against a specific unit's scope, so it ends up being assigned to the INCLUDE_ALL IOMMU. Which was always actually correct by coincidence, but now we're looking at Root-Complex integrated devices with SR-IOV support it's going to start being wrong. Fix it to simply use pci_physfn() before doing the lookup for PCI devices. Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-02iommu/vt-d: Fix PASID table allocationDavid Woodhouse2-11/+18
commit 910170442944e1f8674fd5ddbeeb8ccd1877ea98 upstream. Somehow I ended up with an off-by-three error in calculating the size of the PASID and PASID State tables, which triggers allocations failures as those tables unfortunately have to be physically contiguous. In fact, even the *correct* maximum size of 8MiB is problematic and is wont to lead to allocation failures. Since I have extracted a promise that this *will* be fixed in hardware, I'm happy to limit it on the current hardware to a maximum of 0x20000 PASIDs, which gives us 1MiB tables — still not ideal, but better than before. Reported by Mika Kuoppala <mika.kuoppala@linux.intel.com> and also by Xunlei Pang <xlpang@redhat.com> who submitted a simpler patch to fix only the allocation (and not the free) to the "correct" limit... which was still problematic. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26Linux 4.4.35v4.4.35Greg Kroah-Hartman1-1/+1
2016-11-26netfilter: nft_dynset: fix element timeout for HZ != 1000Anders K. Pedersen1-2/+4
commit a8b1e36d0d1d6f51490e7adce35367ed6adb10e7 upstream. With HZ=100 element timeout in dynamic sets (i.e. flow tables) is 10 times higher than configured. Add proper conversion to/from jiffies, when interacting with userspace. I tested this on Linux 4.8.1, and it applies cleanly to current nf and nf-next trees. Fixes: 22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates") Signed-off-by: Anders K. Pedersen <akp@cohaesio.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/cm: Mark stale CM id's whenever the mad agent was unregisteredMark Bloch1-16/+110
commit 9db0ff53cb9b43ed75bacd42a89c1a0ab048b2b0 upstream. When there is a CM id object that has port assigned to it, it means that the cm-id asked for the specific port that it should go by it, but if that port was removed (hot-unplug event) the cm-id was not updated. In order to fix that the port keeps a list of all the cm-id's that are planning to go by it, whenever the port is removed it marks all of them as invalid. This commit fixes a kernel panic which happens when running traffic between guests and we force reboot a guest mid traffic, it triggers a kernel panic: Call Trace: [<ffffffff815271fa>] ? panic+0xa7/0x16f [<ffffffff8152b534>] ? oops_end+0xe4/0x100 [<ffffffff8104a00b>] ? no_context+0xfb/0x260 [<ffffffff81084db2>] ? del_timer_sync+0x22/0x30 [<ffffffff8104a295>] ? __bad_area_nosemaphore+0x125/0x1e0 [<ffffffff81084240>] ? process_timeout+0x0/0x10 [<ffffffff8104a363>] ? bad_area_nosemaphore+0x13/0x20 [<ffffffff8104aabf>] ? __do_page_fault+0x31f/0x480 [<ffffffff81065df0>] ? default_wake_function+0x0/0x20 [<ffffffffa0752675>] ? free_msg+0x55/0x70 [mlx5_core] [<ffffffffa0753434>] ? cmd_exec+0x124/0x840 [mlx5_core] [<ffffffff8105a924>] ? find_busiest_group+0x244/0x9f0 [<ffffffff8152d45e>] ? do_page_fault+0x3e/0xa0 [<ffffffff8152a815>] ? page_fault+0x25/0x30 [<ffffffffa024da25>] ? cm_alloc_msg+0x35/0xc0 [ib_cm] [<ffffffffa024e821>] ? ib_send_cm_dreq+0xb1/0x1e0 [ib_cm] [<ffffffffa024f836>] ? cm_destroy_id+0x176/0x320 [ib_cm] [<ffffffffa024fb00>] ? ib_destroy_cm_id+0x10/0x20 [ib_cm] [<ffffffffa034f527>] ? ipoib_cm_free_rx_reap_list+0xa7/0x110 [ib_ipoib] [<ffffffffa034f590>] ? ipoib_cm_rx_reap+0x0/0x20 [ib_ipoib] [<ffffffffa034f5a5>] ? ipoib_cm_rx_reap+0x15/0x20 [ib_ipoib] [<ffffffff81094d20>] ? worker_thread+0x170/0x2a0 [<ffffffff8109b2a0>] ? autoremove_wake_function+0x0/0x40 [<ffffffff81094bb0>] ? worker_thread+0x0/0x2a0 [<ffffffff8109aef6>] ? kthread+0x96/0xa0 [<ffffffff8100c20a>] ? child_rip+0xa/0x20 [<ffffffff8109ae60>] ? kthread+0x0/0xa0 [<ffffffff8100c200>] ? child_rip+0x0/0x20 Fixes: a977049dacde ("[PATCH] IB: Add the kernel CM implementation") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/uverbs: Fix leak of XRC target QPsTariq Toukan1-5/+2
commit 5b810a242c28e1d8d64d718cebe75b79d86a0b2d upstream. The real QP is destroyed in case of the ref count reaches zero, but for XRC target QPs this call was missed and caused to QP leaks. Let's call to destroy for all flows. Fixes: 0e0ec7e0638e ('RDMA/core: Export ib_open_qp() to share XRC...') Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/core: Avoid unsigned int overflow in sg_alloc_tableMark Bloch1-1/+1
commit 3c7ba5760ab8eedec01159b267bb9bfcffe522ac upstream. sg_alloc_table gets unsigned int as parameter while the driver returns it as size_t. Check npages isn't greater than maximum unsigned int. Fixes: eeb8461e36c9 ("IB: Refactor umem to use linear SG table") Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/mlx5: Fix fatal error dispatchingEli Cohen1-2/+5
commit dbaaff2a2caa03d472b5cc53a3fbfd415c97dc26 upstream. When an internal error condition is detected, make sure to set the device inactive after dispatching the event so ULPs can get a notification of this event. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/mlx5: Use cache line size to select CQE strideDaniel Jurgens1-2/+1
commit 16b0e0695a73b68d8ca40288c8f9614ef208917b upstream. When creating kernel CQs use 128B CQE stride if the cache line size is 128B, 64B otherwise. This prevents multiple CQEs from residing in a 128B cache line, which can cause retries when there are concurrent read and writes in one cache line. Tested with IPoIB on PPC64, saw ~5% throughput improvement. Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/mlx4: Fix create CQ error flowMatan Barak1-1/+4
commit 593ff73bcfdc79f79a8a0df55504f75ad3e5d1a9 upstream. Currently, if ib_copy_to_udata fails, the CQ won't be deleted from the radix tree and the HW (HW2SW). Fixes: 225c7b1feef1 ('IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26IB/mlx4: Check gid_index return valueDaniel Jurgens1-1/+4
commit 37995116fecfce2b61ee3da6e73b3e394c6818f9 upstream. Check the returned GID index value and return an error if it is invalid. Fixes: 5070cd2239bd ('IB/mlx4: Replace mechanism for RoCE GID management') Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26PM / sleep: don't suspend parent when async child suspend_{noirq, late} failsBrian Norris1-4/+4
commit 6f75c3fd56daf547d684127a7f83c283c3c160d1 upstream. Consider two devices, A and B, where B is a child of A, and B utilizes asynchronous suspend (it does not matter whether A is sync or async). If B fails to suspend_noirq() or suspend_late(), or is interrupted by a wakeup (pm_wakeup_pending()), then it aborts and sets the async_error variable. However, device A does not (immediately) check the async_error variable; it may continue to run its own suspend_noirq()/suspend_late() callback. This is bad. We can resolve this problem by doing our error and wakeup checking (particularly, for the async_error flag) after waiting for children to suspend, instead of before. This also helps align the logic for the noirq and late suspend cases with the logic in __device_suspend(). It's easy to observe this erroneous behavior by, for example, forcing a device to sleep a bit in its suspend_noirq() (to ensure the parent is waiting for the child to complete), then return an error, and watch the parent suspend_noirq() still get called. (Or similarly, fake a wakeup event at the right (or is it wrong?) time.) Fixes: de377b397272 (PM / sleep: Asynchronous threads for suspend_late) Fixes: 28b6fd6e3779 (PM / sleep: Asynchronous threads for suspend_noirq) Reported-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26PM / sleep: fix device reference leak in test_suspendJohan Hovold1-1/+3
commit ceb75787bc75d0a7b88519ab8a68067ac690f55a upstream. Make sure to drop the reference taken by class_find_device() after opening the RTC device. Fixes: 77437fd4e61f (pm: boot time suspend selftest) Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26uwb: fix device reference leaksJohan Hovold2-3/+15
commit d6124b409ca33c100170ffde51cd8dff761454a1 upstream. This subsystem consistently fails to drop the device reference taken by class_find_device(). Note that some of these lookup functions already take a reference to the returned data, while others claim no reference is needed (or does not seem need one). Fixes: 183b9b592a62 ("uwb: add the UWB stack (core files)") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26mfd: core: Fix device reference leak in mfd_clone_cellJohan Hovold1-0/+2
commit 722f191080de641f023feaa7d5648caf377844f5 upstream. Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26iwlwifi: pcie: fix SPLC structure parsingLuca Coelho1-31/+48
commit e0d9727c111a5917a1184c71c1a8e6f78c7fc41d upstream. The SPLC data parsing is too restrictive and was not trying find the correct element for WiFi. This causes problems with some BIOSes where the SPLC method exists, but doesn't have a WiFi entry on the first element of the list. The domain type values are also incorrect according to the specification. Fix this by complying with the actual specification. Additionally, replace all occurrences of SPLX to SPLC, since SPLX is only a structure internal to the ACPI tables, and may not even exist. Fixes: bcb079a14d75 ("iwlwifi: pcie: retrieve and parse ACPI power limitations") Reported-by: Chris Rorvick <chris@rorvick.com> Tested-by: Paul Bolle <pebolle@tiscali.nl> Tested-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26rtc: omap: Fix selecting external oscLokesh Vutla1-2/+4
commit 3984903a2e3906d3def220e688040ce93368200a upstream. RTC can be clocked from an external 32KHz oscillator, or from the Peripheral PLL. The RTC has an internal oscillator buffer to support direct operation with a crystal. ---------------------------------------- | Device --------- | | | | | | | RTCSS | | | --------- | | | OSC |<------| RTC | | | | |------>| OSC |--- | | | | -------- | | | | | ----|clk | | | -------- | | | | | | PRCM |--- | | | | -------- -------- | ---------------------------------------- The RTC functional clock is sourced by default from the clock derived from the Peripheral PLL. In order to select source as external osc clk the following changes needs to be done: - Enable the RTC OSC (RTC_OSC_REG[4]OSC32K_GZ = 0) - Enable the clock mux(RTC_OSC_REG[6]K32CLK_EN = 1) - Select the external clock source (RTC_OSC_REG[3]32KCLK_SEL = 1) Fixes: 399cf0f63f6f2 ("rtc: omap: Add external clock enabling support") Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26clk: mmp: mmp2: fix return value check in mmp2_clk_init()Wei Yongjun1-1/+1
commit a29e52a6e66f4c0c895e7083e4bad2e7957f1fb5 upstream. Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26clk: mmp: pxa168: fix return value check in pxa168_clk_init()Wei Yongjun1-1/+1
commit deab07261d54b4db7b627d38e0efac97f176c6d6 upstream. Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26clk: mmp: pxa910: fix return value check in pxa910_clk_init()Wei Yongjun1-2/+2
commit 10f2bfb092e3b49000526c02cfe8b2abbbdbb752 upstream. Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26drm/amdgpu: Attach exclusive fence to prime exported bo's. (v5)Mario Kleiner3-2/+21
commit 8e94a46c1770884166b31adc99eba7da65a446a7 upstream. External clients which import our bo's wait only for exclusive dmabuf-fences, not on shared ones, ditto for bo's which we import from external providers and write to. Therefore attach exclusive fences on prime shared buffers if our exported buffer gets imported by an external client, or if we import a buffer from an external exporter. See discussion in thread: https://lists.freedesktop.org/archives/dri-devel/2016-October/122370.html Prime export tested on Intel iGPU + AMD Tonga dGPU as DRI3/Present Prime render offload, and with the Tonga standalone as primary gpu. v2: Add a wait for all shared fences before prime export, as suggested by Christian Koenig. v3: - Mark buffer prime_exported in amdgpu_gem_prime_pin, so we only use the exclusive fence when exporting a bo to external clients like a separate iGPU, but not when exporting/importing from/to ourselves as part of regular DRI3 fd passing. - Propagate failure of reservation_object_wait_rcu back to caller. v4: - Switch to a prime_shared_count counter instead of a flag, which gets in/decremented on prime_pin/unpin, so we can switch back to shared fences if all clients detach from our exported bo. - Also switch to exclusive fence for prime imported bo's. v5: - Drop lret, instead use int ret -> long ret, as proposed by Christian. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=95472 Tested-by: Mike Lothian <mike@fireburn.co.uk> (v1) Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Cc: Christian König <christian.koenig@amd.com> Cc: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26crypto: caam - do not register AES-XTS mode on LP unitsSven Ebenfeld1-0/+9
commit 83d2c9a9c17b1e9f23a3a0c24c03cd18e4b02520 upstream. When using AES-XTS on a Wandboard, we receive a Mode error: caam_jr 2102000.jr1: 20001311: CCB: desc idx 19: AES: Mode error. According to the Security Reference Manual, the Low Power AES units of the i.MX6 do not support the XTS mode. Therefore we must not register XTS implementations in the Crypto API. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com> Reviewed-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: c6415a6016bf "crypto: caam - add support for acipher xts(aes)" Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-11-26ext4: sanity check the block and cluster size at mount timeTheodore Ts'o2-1/+17
commit 8cdf3372fe8368f56315e66bea9f35053c418093 upstream. If the block size or cluster size is insane, reject the mount. This is important for security reasons (although we shouldn't be just depending on this check). Ref: http://www.securityfocus.com/archive/1/539661 Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506 Reported-by: Borislav Petkov <bp@alien8.de> Reported-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26kbuild: Steal gcc's pie from the very beginningBorislav Petkov1-4/+3
commit c6a385539175ebc603da53aafb7753d39089f32e upstream. So Sebastian turned off the PIE for kernel builds but that was too late - Kbuild.include already uses KBUILD_CFLAGS and trying to disable gcc options with, say cc-disable-warning, fails: gcc -D__KERNEL__ -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs ... -Wno-sign-compare -fno-asynchronous-unwind-tables -Wframe-address -c -x c /dev/null -o .31392.tmp /dev/null:1:0: error: code model kernel does not support PIC mode because that returns an error and we can't disable the warning. For example in this case: KBUILD_CFLAGS += $(call cc-disable-warning,frame-address,) which leads to gcc issuing all those warnings again. So let's turn off PIE/PIC at the earliest possible moment, when we declare KBUILD_CFLAGS so that cc-disable-warning picks it up too. Also, we need the $(call cc-option ...) because -fno-PIE is supported since gcc v3.4 and our lowest supported gcc version is 3.2 right now. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26x86/kexec: add -fno-PIESebastian Andrzej Siewior1-0/+1
commit 90944e40ba1838de4b2a9290cf273f9d76bd3bdd upstream. If the gcc is configured to do -fPIE by default then the build aborts later with: | Unsupported relocation type: unknown type rel type name (29) Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26scripts/has-stack-protector: add -fno-PIESebastian Andrzej Siewior1-1/+1
commit 82031ea29e454b574bc6f49a33683a693ca5d907 upstream. Adding -no-PIE to the fstack protector check. -no-PIE was introduced before -fstack-protector so there is no need for a runtime check. Without it the build stops: |Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong available but compiler is broken due to -mcmodel=kernel + -fPIE if -fPIE is enabled by default. Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26kbuild: add -fno-PIESebastian Andrzej Siewior1-0/+2
commit 8ae94224c9d72fc4d9aaac93b2d7833cf46d7141 upstream. Debian started to build the gcc with -fPIE by default so the kernel build ends before it starts properly with: |kernel/bounds.c:1:0: error: code model kernel does not support PIC mode Also add to KBUILD_AFLAGS due to: |gcc -Wp,-MD,arch/x86/entry/vdso/vdso32/.note.o.d … -mfentry -DCC_USING_FENTRY … vdso/vdso32/note.S |arch/x86/entry/vdso/vdso32/note.S:1:0: sorry, unimplemented: -mfentry isn’t supported for 32-bit in combination with -fpic Tagging it stable so it is possible to compile recent stable kernels as well. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-26i2c: mux: fix up dependenciesLinus Walleij2-1/+1
commit 93d710a65ef02fb7fd48ae207e78f460bd7a6089 upstream. We get the following build error from UM Linux after adding an entry to drivers/iio/gyro/Kconfig that issues "select I2C_MUX": ERROR: "devm_ioremap_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! ERROR: "of_address_to_resource" [drivers/i2c/muxes/i2c-mux-reg.ko] undefined! It appears that the I2C mux core code depends on HAS_IOMEM for historical reasons, while CONFIG_I2C_MUX_REG does *not* have a direct dependency on HAS_IOMEM. This creates a situation where a allyesconfig or allmodconfig for UM Linux will select I2C_MUX, and will implicitly enable I2C_MUX_REG as well, and the compilation will fail for the register driver. Fix this up by making I2C_MUX_REG depend on HAS_IOMEM and removing the dependency from I2C_MUX. Reported-by: kbuild test robot <fengguang.wu@intel.com> Reported-by: Jonathan Cameron <jic23@jic23.retrosnub.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <jic23@kernel.org> Acked-by: Peter Rosin <peda@axentia.se> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-10-03 23:08:24 +0300