summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-01-27mac80211: allow non-standard VHT MCS-10/11Ping-Ke Shih1-1/+1
[ Upstream commit 04be6d337d37400ad5b3d5f27ca87645ee5a18a3 ] Some AP can possibly try non-standard VHT rate and mac80211 warns and drops packets, and leads low TCP throughput. Rate marked as a VHT rate but data is invalid: MCS: 10, NSS: 2 WARNING: CPU: 1 PID: 7817 at net/mac80211/rx.c:4856 ieee80211_rx_list+0x223/0x2f0 [mac8021 Since commit c27aa56a72b8 ("cfg80211: add VHT rate entries for MCS-10 and MCS-11") has added, mac80211 adds this support as well. After this patch, throughput is good and iw can get the bitrate: rx bitrate: 975.1 MBit/s VHT-MCS 10 80MHz short GI VHT-NSS 2 or rx bitrate: 1083.3 MBit/s VHT-MCS 11 80MHz short GI VHT-NSS 2 Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192891 Reported-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://lore.kernel.org/r/20220103013623.17052-1-pkshih@realtek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: mdio: Demote probed message to debug printFlorian Fainelli1-1/+1
[ Upstream commit 7590fc6f80ac2cbf23e6b42b668bbeded070850b ] On systems with large numbers of MDIO bus/muxes the message indicating that a given MDIO bus has been successfully probed is repeated for as many buses we have, which can eat up substantial boot time for no reason, demote to a debug print. Reported-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27btrfs: remove BUG_ON(!eie) in find_parent_nodesJosef Bacik1-3/+11
[ Upstream commit 9f05c09d6baef789726346397438cca4ec43c3ee ] If we're looking for leafs that point to a data extent we want to record the extent items that point at our bytenr. At this point we have the reference and we know for a fact that this leaf should have a reference to our bytenr. However if there's some sort of corruption we may not find any references to our leaf, and thus could end up with eie == NULL. Replace this BUG_ON() with an ASSERT() and then return -EUCLEAN for the mortals. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27btrfs: remove BUG_ON() in find_parent_nodes()Josef Bacik1-1/+6
[ Upstream commit fcba0120edf88328524a4878d1d6f4ad39f2ec81 ] We search for an extent entry with .offset = -1, which shouldn't be a thing, but corruption happens. Add an ASSERT() for the developers, return -EUCLEAN for mortals. Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPI: battery: Add the ThinkPad "Not Charging" quirkThomas Weißschuh1-0/+22
[ Upstream commit e96c1197aca628f7d2480a1cc3214912b40b3414 ] The EC/ACPI firmware on Lenovo ThinkPads used to report a status of "Unknown" when the battery is between the charge start and charge stop thresholds. On Windows, it reports "Not Charging" so the quirk has been added to also report correctly. Now the "status" attribute returns "Not Charging" when the battery on ThinkPads is not physicaly charging. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27amdgpu/pm: Make sysfs pm attributes as read-only for VFsMarina Nikolic1-0/+6
[ Upstream commit 11c9cc95f818f0f187e9b579a7f136f532b42445 ] == Description == Setting values of pm attributes through sysfs should not be allowed in SRIOV mode. These calls will not be processed by FW anyway, but error handling on sysfs level should be improved. == Changes == This patch prohibits performing of all set commands in SRIOV mode on sysfs level. It offers better error handling as calls that are not allowed will not be propagated further. == Test == Writing to any sysfs file in passthrough mode will succeed. Writing to any sysfs file in ONEVF mode will yield error: "calling process does not have sufficient permission to execute a command". Signed-off-by: Marina Nikolic <Marina.Nikolic@amd.com> Acked-by: Evan Quan <evan.quan@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/amdgpu: fixup bad vram size on gmc v8Zongmin Zhou1-3/+10
[ Upstream commit 11544d77e3974924c5a9c8a8320b996a3e9b2f8b ] Some boards(like RX550) seem to have garbage in the upper 16 bits of the vram size register. Check for this and clamp the size properly. Fixes boards reporting bogus amounts of vram. after add this patch,the maximum GPU VRAM size is 64GB, otherwise only 64GB vram size will be used. Signed-off-by: Zongmin Zhou<zhouzongmin@kylinos.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5Kirill A. Shutemov3-4/+6
[ Upstream commit 1d4e0b3abb168b2ee1eca99c527cffa1b80b6161 ] ACPICA commit 3dd7e1f3996456ef81bfe14cba29860e8d42949e According to ACPI 6.4, Section 16.2, the CPU cache flushing is required on entering to S1, S2, and S3, but the ACPICA code flushes the CPU cache regardless of the sleep state. Blind cache flush on entering S5 causes problems for TDX. Flushing happens with WBINVD that is not supported in the TDX environment. TDX only supports S5 and adjusting ACPICA code to conform to the spec more strictly fixes the issue. Link: https://github.com/acpica/acpica/commit/3dd7e1f3 Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPICA: Fix wrong interpretation of PCC addressSudeep Holla1-6/+1
[ Upstream commit 9a3b8655db1ada31c82189ae13f40eb25da48c35 ] ACPICA commit 41be6afacfdaec2dba3a5ed368736babc2a7aa5c With the PCC Opregion in the firmware and we are hitting below kernel crash: -->8 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 Workqueue: pm pm_runtime_work pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x54/0x260 lr : acpi_ex_write_data_to_field+0xb8/0x194 Call trace: __memcpy+0x54/0x260 acpi_ex_store_object_to_node+0xa4/0x1d4 acpi_ex_store+0x44/0x164 acpi_ex_opcode_1A_1T_1R+0x25c/0x508 acpi_ds_exec_end_op+0x1b4/0x44c acpi_ps_parse_loop+0x3a8/0x614 acpi_ps_parse_aml+0x90/0x2f4 acpi_ps_execute_method+0x11c/0x19c acpi_ns_evaluate+0x1ec/0x2b0 acpi_evaluate_object+0x170/0x2b0 acpi_device_set_power+0x118/0x310 acpi_dev_suspend+0xd4/0x180 acpi_subsys_runtime_suspend+0x28/0x38 __rpm_callback+0x74/0x328 rpm_suspend+0x2d8/0x624 pm_runtime_work+0xa4/0xb8 process_one_work+0x194/0x25c worker_thread+0x260/0x49c kthread+0x14c/0x30c ret_from_fork+0x10/0x20 Code: f9000006 f81f80a7 d65f03c0 361000c2 (b9400026) ---[ end trace 24d8a032fa77b68a ]--- The reason for the crash is that the PCC channel index passed via region.address in acpi_ex_store_object_to_node is interpreted as the channel subtype incorrectly. Assuming the PCC op_region support is not used by any other type, let us remove the subtype check as the AML has no access to the subtype information. Once we remove it, the kernel crash disappears and correctly complains about missing PCC Opregion handler. ACPI Error: No handler for Region [PFRM] ((____ptrval____)) [PCC] (20210730/evregion-130) ACPI Error: Region PCC (ID=10) has no handler (20210730/exfldio-261) ACPI Error: Aborting method \_SB.ETH0._PS3 due to previous error (AE_NOT_EXIST) (20210730/psparse-531) Link: https://github.com/acpica/acpica/commit/41be6afa Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPICA: Executer: Fix the REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R()Rafael J. Wysocki1-1/+2
[ Upstream commit 24ea5f90ec9548044a6209685c5010edd66ffe8f ] ACPICA commit d984f12041392fa4156b52e2f7e5c5e7bc38ad9e If Operand[0] is a reference of the ACPI_REFCLASS_REFOF class, acpi_ex_opcode_1A_0T_1R () calls acpi_ns_get_attached_object () to obtain return_desc which may require additional resolution with the help of acpi_ex_read_data_from_field (). If the latter fails, the reference counter of the original return_desc is decremented which is incorrect, because acpi_ns_get_attached_object () does not increment the reference counter of the object returned by it. This issue may lead to premature deletion of the attached object while it is still attached and a use-after-free and crash in the host OS. For example, this may happen when on evaluation of ref_of() a local region field where there is no registered handler for the given Operation Region. Fix it by making acpi_ex_opcode_1A_0T_1R () return Status right away after a acpi_ex_read_data_from_field () failure. Link: https://github.com/acpica/acpica/commit/d984f120 Link: https://github.com/acpica/acpica/pull/685 Reported-by: Lenny Szubowicz <lszubowi@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPICA: Utilities: Avoid deleting the same object twice in a rowRafael J. Wysocki1-0/+1
[ Upstream commit 1cdfe9e346b4c5509ffe19ccde880fd259d9f7a3 ] ACPICA commit c11af67d8f7e3d381068ce7771322f2b5324d687 If original_count is 0 in acpi_ut_update_ref_count (), acpi_ut_delete_internal_obj () is invoked for the target object, which is incorrect, because that object has been deleted once already and the memory allocated to store it may have been reclaimed and allocated for a different purpose by the host OS. Moreover, a confusing debug message following the "Reference Count is already zero, cannot decrement" warning is printed in that case. To fix this issue, make acpi_ut_update_ref_count () return after finding that original_count is 0 and printing the above warning. Link: https://github.com/acpica/acpica/commit/c11af67d Link: https://github.com/acpica/acpica/pull/652 Reported-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ACPICA: actypes.h: Expand the ACPI_ACCESS_ definitionsMark Langsdorf1-2/+8
[ Upstream commit f81bdeaf816142e0729eea0cc84c395ec9673151 ] ACPICA commit bc02c76d518135531483dfc276ed28b7ee632ce1 The current ACPI_ACCESS_*_WIDTH defines do not provide a way to test that size is small enough to not cause an overflow when applied to a 32-bit integer. Rather than adding more magic numbers, add ACPI_ACCESS_*_SHIFT, ACPI_ACCESS_*_MAX, and ACPI_ACCESS_*_DEFAULT #defines and redefine ACPI_ACCESS_*_WIDTH in terms of the new #defines. This was inititally reported on Linux where a size of 102 in ACPI_ACCESS_BIT_WIDTH caused an overflow error in the SPCR initialization code. Link: https://github.com/acpica/acpica/commit/bc02c76d Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27jffs2: GC deadlock reading a page that is used in jffs2_write_begin()Kyeong Yoo1-15/+25
[ Upstream commit aa39cc675799bc92da153af9a13d6f969c348e82 ] GC task can deadlock in read_cache_page() because it may attempt to release a page that is actually allocated by another task in jffs2_write_begin(). The reason is that in jffs2_write_begin() there is a small window a cache page is allocated for use but not set Uptodate yet. This ends up with a deadlock between two tasks: 1) A task (e.g. file copy) - jffs2_write_begin() locks a cache page - jffs2_write_end() tries to lock "alloc_sem" from jffs2_reserve_space() <-- STUCK 2) GC task (jffs2_gcd_mtd3) - jffs2_garbage_collect_pass() locks "alloc_sem" - try to lock the same cache page in read_cache_page() <-- STUCK So to avoid this deadlock, hold "alloc_sem" in jffs2_write_begin() while reading data in a cache page. Signed-off-by: Kyeong Yoo <kyeong.yoo@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27drm/etnaviv: consider completed fence seqno in hang checkLucas Stach2-1/+4
[ Upstream commit cdd156955f946beaa5f3a00d8ccf90e5a197becc ] Some GPU heavy test programs manage to trigger the hangcheck quite often. If there are no other GPU users in the system and the test program exhibits a very regular structure in the commandstreams that are being submitted, we can end up with two distinct submits managing to trigger the hangcheck with the FE in a very similar address range. This leads the hangcheck to believe that the GPU is stuck, while in reality the GPU is already busy working on a different job. To avoid those spurious GPU resets, also remember and consider the last completed fence seqno in the hang check. Reported-by: Joerg Albert <joerg.albert@iav.de> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27xfrm: rate limit SA mapping change message to user spaceAntony Antony5-4/+49
[ Upstream commit 4e484b3e969b52effd95c17f7a86f39208b2ccf4 ] Kernel generates mapping change message, XFRM_MSG_MAPPING, when a source port chage is detected on a input state with UDP encapsulation set. Kernel generates a message for each IPsec packet with new source port. For a high speed flow per packet mapping change message can be excessive, and can overload the user space listener. Introduce rate limiting for XFRM_MSG_MAPPING message to the user space. The rate limiting is configurable via netlink, when adding a new SA or updating it. Use the new attribute XFRMA_MTIMER_THRESH in seconds. v1->v2 change: update xfrm_sa_len() v2->v3 changes: use u32 insted unsigned long to reduce size of struct xfrm_state fix xfrm_ompat size Reported-by: kernel test robot <lkp@intel.com> accept XFRM_MSG_MAPPING only when XFRMA_ENCAP is present Co-developed-by: Thomas Egerer <thomas.egerer@secunet.com> Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com> Signed-off-by: Antony Antony <antony.antony@secunet.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATESLuiz Augusto von Dentz1-0/+2
[ Upstream commit cfb4c313be670fd4bd09650216620fa4514cdb93 ] This set HCI_QUIRK_VALID_LE_STATES quirk which is required for the likes of experimental LE simultaneous roles. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath11k: Fix napi related hangBen Greear3-7/+19
[ Upstream commit d943fdad7589653065be0e20aadc6dff37725ed4 ] Similar to the same bug in ath10k, a napi disable w/out it being enabled will hang forever. I believe I saw this while trying rmmod after driver had some failure on startup. Fix it by keeping state on whether napi is enabled or not. And, remove un-used napi pointer in ath11k driver base struct. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20200903195254.29379-1-greearb@candelatech.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27um: registers: Rename function names to avoid conflicts and build problemsRandy Dunlap4-6/+7
[ Upstream commit 077b7320942b64b0da182aefd83c374462a65535 ] The function names init_registers() and restore_registers() are used in several net/ethernet/ and gpu/drm/ drivers for other purposes (not calls to UML functions), so rename them. This fixes multiple build errors. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: linux-um@lists.infradead.org Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: pcie: make sure prph_info is set when treating wakeup IRQLuca Coelho1-1/+6
[ Upstream commit 459fc0f2c6b0f6e280bfa0f230c100c9dfe3a199 ] In some rare cases when the HW is in a bad state, we may get this interrupt when prph_info is not set yet. Then we will try to dereference it to check the sleep_notif element, which will cause an oops. Fix that by ignoring the interrupt if prph_info is not set yet. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: Fix calculation of frame lengthIlan Peer1-0/+27
[ Upstream commit 40a0b38d7a7f91a6027287e0df54f5f547e8d27e ] The RADA might include in the Rx frame the MIC and CRC bytes. These bytes should be removed for non monitor interfaces and should not be passed to mac80211. Fix the Rx processing to remove the extra bytes on non monitor cases. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: remove module loading failure messageJohannes Berg1-8/+1
[ Upstream commit 6518f83ffa51131daaf439b66094f684da3fb0ae ] When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes when the opmode module cannot be loaded, due to completing the completion before using drv->dev, which can then already be freed. Fix this by removing the (fairly useless) message. Moving the completion later causes a deadlock instead, so that's not an option. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: fix leaks/bad data after failed firmware loadJohannes Berg1-0/+8
[ Upstream commit ab07506b0454bea606095951e19e72c282bfbb42 ] If firmware load fails after having loaded some parts of the firmware, e.g. the IML image, then this would leak. For the host command list we'd end up running into a WARN on the next attempt to load another firmware image. Fix this by calling iwl_dealloc_ucode() on failures, and make that also clear the data so we start fresh on the next round. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27PM: AVS: qcom-cpr: Use div64_ul instead of do_divChangcheng Deng1-1/+1
[ Upstream commit 92c550f9ffd2884bb5def52b5c0485a35e452784 ] do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211125014311.45942-1-deng.changcheng@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27rtw88: 8822c: update rx settings to prevent potential hw deadlockPo-Hao Huang4-4/+4
[ Upstream commit c1afb26727d9e507d3e17a9890e7aaf7fc85cd55 ] These settings enables mac to detect and recover when rx fifo circuit deadlock occurs. Previous version missed this, so we fix it. Signed-off-by: Po-Hao Huang <phhuang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211217012708.8623-1-pkshih@realtek.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath9k: Fix out-of-bound memcpy in ath9k_hif_usb_rx_streamZekun Shen1-0/+7
[ Upstream commit 6ce708f54cc8d73beca213cec66ede5ce100a781 ] Large pkt_len can lead to out-out-bound memcpy. Current ath9k_hif_usb_rx_stream allows combining the content of two urb inputs to one pkt. The first input can indicate the size of the pkt. Any remaining size is saved in hif_dev->rx_remain_len. While processing the next input, memcpy is used with rx_remain_len. 4-byte pkt_len can go up to 0xffff, while a single input is 0x4000 maximum in size (MAX_RX_BUF_SIZE). Thus, the patch adds a check for pkt_len which must not exceed 2 * MAX_RX_BUG_SIZE. BUG: KASAN: slab-out-of-bounds in ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] Read of size 46393 at addr ffff888018798000 by task kworker/0:1/23 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 5.6.0 #63 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-prebuilt.qemu-project.org 04/01/2014 Workqueue: events request_firmware_work_func Call Trace: <IRQ> dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] __kasan_report.cold+0x37/0x7c ? ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] kasan_report+0xe/0x20 check_memory_region+0x15a/0x1d0 memcpy+0x20/0x50 ath9k_hif_usb_rx_cb+0x490/0xed7 [ath9k_htc] ? hif_usb_mgmt_cb+0x2d9/0x2d9 [ath9k_htc] ? _raw_spin_lock_irqsave+0x7b/0xd0 ? _raw_spin_trylock_bh+0x120/0x120 ? __usb_unanchor_urb+0x12f/0x210 __usb_hcd_giveback_urb+0x1e4/0x380 usb_giveback_urb_bh+0x241/0x4f0 ? __hrtimer_run_queues+0x316/0x740 ? __usb_hcd_giveback_urb+0x380/0x380 tasklet_action_common.isra.0+0x135/0x330 __do_softirq+0x18c/0x634 irq_exit+0x114/0x140 smp_apic_timer_interrupt+0xde/0x380 apic_timer_interrupt+0xf/0x20 I found the bug using a custome USBFuzz port. It's a research work to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only, providing hand-crafted usb descriptors to QEMU. After fixing the value of pkt_tag to ATH_USB_RX_STREAM_MODE_TAG in QEMU emulation, I found the KASAN report. The bug is triggerable whenever pkt_len is above two MAX_RX_BUG_SIZE. I used the same input that crashes to test the driver works when applying the patch. Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YXsidrRuK6zBJicZ@10-18-43-117.dynapool.wireless.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27usb: hub: Add delay for SuperSpeed hub resume to let links transit to U0Kai-Heng Feng1-1/+4
[ Upstream commit 00558586382891540c59c9febc671062425a6e47 ] When a new USB device gets plugged to nested hubs, the affected hub, which connects to usb 2-1.4-port2, doesn't report there's any change, hence the nested hubs go back to runtime suspend like nothing happened: [ 281.032951] usb usb2: usb wakeup-resume [ 281.032959] usb usb2: usb auto-resume [ 281.032974] hub 2-0:1.0: hub_resume [ 281.033011] usb usb2-port1: status 0263 change 0000 [ 281.033077] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.049797] usb 2-1: usb wakeup-resume [ 281.069800] usb 2-1: Waited 0ms for CONNECT [ 281.069810] usb 2-1: finish resume [ 281.070026] hub 2-1:1.0: hub_resume [ 281.070250] usb 2-1-port4: status 0203 change 0000 [ 281.070272] usb usb2-port1: resume, status 0 [ 281.070282] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.089813] usb 2-1.4: usb wakeup-resume [ 281.109792] usb 2-1.4: Waited 0ms for CONNECT [ 281.109801] usb 2-1.4: finish resume [ 281.109991] hub 2-1.4:1.0: hub_resume [ 281.110147] usb 2-1.4-port2: status 0263 change 0000 [ 281.110234] usb 2-1-port4: resume, status 0 [ 281.110239] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.110266] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.110426] hub 2-1.4:1.0: hub_suspend [ 281.110565] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.130998] hub 2-1:1.0: hub_suspend [ 281.137788] usb 2-1: usb auto-suspend, wakeup 1 [ 281.142935] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.177828] usb 2-1: usb wakeup-resume [ 281.197839] usb 2-1: Waited 0ms for CONNECT [ 281.197850] usb 2-1: finish resume [ 281.197984] hub 2-1:1.0: hub_resume [ 281.198203] usb 2-1-port4: status 0203 change 0000 [ 281.198228] usb usb2-port1: resume, status 0 [ 281.198237] hub 2-1:1.0: state 7 ports 4 chg 0010 evt 0000 [ 281.217835] usb 2-1.4: usb wakeup-resume [ 281.237834] usb 2-1.4: Waited 0ms for CONNECT [ 281.237845] usb 2-1.4: finish resume [ 281.237990] hub 2-1.4:1.0: hub_resume [ 281.238067] usb 2-1.4-port2: status 0263 change 0000 [ 281.238148] usb 2-1-port4: resume, status 0 [ 281.238152] usb 2-1-port4: status 0203, change 0000, 10.0 Gb/s [ 281.238166] hub 2-1.4:1.0: state 7 ports 4 chg 0000 evt 0000 [ 281.238385] hub 2-1.4:1.0: hub_suspend [ 281.238523] usb 2-1.4: usb auto-suspend, wakeup 1 [ 281.258076] hub 2-1:1.0: hub_suspend [ 281.265744] usb 2-1: usb auto-suspend, wakeup 1 [ 281.285976] hub 2-0:1.0: hub_suspend [ 281.285988] usb usb2: bus auto-suspend, wakeup 1 USB 3.2 spec, 9.2.5.4 "Changing Function Suspend State" says that "If the link is in a non-U0 state, then the device must transition the link to U0 prior to sending the remote wake message", but the hub only transits the link to U0 after signaling remote wakeup. So be more forgiving and use a 20ms delay to let the link transit to U0 for remote wakeup. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20211215120108.336597-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27cpufreq: Fix initialization of min and max frequency QoS requestsRafael J. Wysocki1-2/+2
[ Upstream commit 521223d8b3ec078f670c7c35a1a04b1b2af07966 ] The min and max frequency QoS requests in the cpufreq core are initialized to whatever the current min and max frequency values are at the init time, but if any of these values change later (for example, cpuinfo.max_freq is updated by the driver), these initial request values will be limiting the CPU frequency unnecessarily unless they are changed by user space via sysfs. To address this, initialize min_freq_req and max_freq_req to FREQ_QOS_MIN_DEFAULT_VALUE and FREQ_QOS_MAX_DEFAULT_VALUE, respectively, so they don't really limit anything until user space updates them. Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27PM: runtime: Add safety net to supplier device releaseRafael J. Wysocki3-13/+34
[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ] Because refcount_dec_not_one() returns true if the target refcount becomes saturated, it is generally unsafe to use its return value as a loop termination condition, but that is what happens when a device link's supplier device is released during runtime PM suspend operations and on device link removal. To address this, introduce pm_runtime_release_supplier() to be used in the above cases which will check the supplier device's runtime PM usage counter in addition to the refcount_dec_not_one() return value, so the loop can be terminated in case the rpm_active refcount value becomes invalid, and update the code in question to use it as appropriate. This change is not expected to have any visible functional impact. Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: tegra: Adjust length of CCPLEX cluster MMIO regionThierry Reding1-1/+1
[ Upstream commit 2b14cbd643feea5fc17c6e8bead4e71088c69acd ] The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4 MiB - 1. This was likely presumed to be the "limit" rather than length. Fix it up. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27arm64: dts: ls1028a-qds: move rtc node to the correct i2c busBiwen Li1-5/+9
[ Upstream commit cbe9d948eadfe352ad45495a7cc5bf20a1b29d90 ] The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts. Signed-off-by: Biwen Li <biwen.li@nxp.com> Signed-off-by: Li Yang <leoyang.lil@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27audit: ensure userspace is penalized the same as the kernel when under pressurePaul Moore1-1/+17
[ Upstream commit 8f110f530635af44fff1f4ee100ecef0bac62510 ] Due to the audit control mutex necessary for serializing audit userspace messages we haven't been able to block/penalize userspace processes that attempt to send audit records while the system is under audit pressure. The result is that privileged userspace applications have a priority boost with respect to audit as they are not bound by the same audit queue throttling as the other tasks on the system. This patch attempts to restore some balance to the system when under audit pressure by blocking these privileged userspace tasks after they have finished their audit processing, and dropped the audit control mutex, but before they return to userspace. Reported-by: Gaosheng Cui <cuigaosheng1@huawei.com> Tested-by: Gaosheng Cui <cuigaosheng1@huawei.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27mmc: core: Fixup storing of OCR for MMC_QUIRK_NONSTD_SDIOUlf Hansson1-1/+3
[ Upstream commit 8c3e5b74b9e2146f564905e50ca716591c76d4f1 ] The mmc core takes a specific path to support initializing of a non-standard SDIO card. This is triggered by looking for the card-quirk, MMC_QUIRK_NONSTD_SDIO. In mmc_sdio_init_card() this gets rather messy, as it causes the code to bail out earlier, compared to the usual path. This leads to that the OCR doesn't get saved properly in card->ocr. Fortunately, only omap_hsmmc has been using the MMC_QUIRK_NONSTD_SDIO and is dealing with the issue, by assigning a hardcoded value (0x80) to card->ocr from an ->init_card() ops. To make the behaviour consistent, let's instead rely on the core to save the OCR in card->ocr during initialization. Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/e7936cff7fc24d187ef2680d3b4edb0ade58f293.1636564631.git.hns@goldelico.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: saa7146: hexium_gemini: Fix a NULL pointer dereference in hexium_attach()Zhou Qingyang2-2/+7
[ Upstream commit 3af86b046933ba513d08399dba0d4d8b50d607d0 ] In hexium_attach(dev, info), saa7146_vv_init() is called to allocate a new memory for dev->vv_data. saa7146_vv_release() will be called on failure of saa7146_register_device(). There is a dereference of dev->vv_data in saa7146_vv_release(), which could lead to a NULL pointer dereference on failure of saa7146_vv_init(). Fix this bug by adding a check of saa7146_vv_init(). This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_VIDEO_HEXIUM_GEMINI=m show no new warnings, and our static analyzer no longer warns about this code. Link: https://lore.kernel.org/linux-media/20211203154030.111210-1-zhou1615@umn.edu Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27media: igorplugusb: receiver overflow should be reportedSean Young1-1/+3
[ Upstream commit 8fede658e7ddb605bbd68ed38067ddb0af033db4 ] Without this, some IR will be missing mid-stream and we might decode something which never really occurred. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27HID: quirks: Allow inverting the absolute X/Y valuesAlistair Francis2-0/+8
[ Upstream commit fd8d135b2c5e88662f2729e034913f183455a667 ] Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used to invert the X/Y values. Signed-off-by: Alistair Francis <alistair@alistair23.me> [bentiss: silence checkpatch warning] Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27bpf: Do not WARN in bpf_warn_invalid_xdp_action()Paolo Abeni1-3/+3
[ Upstream commit 2cbad989033bff0256675c38f96f5faab852af4b ] The WARN_ONCE() in bpf_warn_invalid_xdp_action() can be triggered by any bugged program, and even attaching a correct program to a NIC not supporting the given action. The resulting splat, beyond polluting the logs, fouls automated tools: e.g. a syzkaller reproducers using an XDP program returning an unsupported action will never pass validation. Replace the WARN_ONCE with a less intrusive pr_warn_once(). Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/016ceec56e4817ebb2a9e35ce794d5c917df572c.1638189075.git.pabeni@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: bonding: debug: avoid printing debug logs when bond is not notifying peersSuresh Kumar1-3/+3
[ Upstream commit fee32de284ac277ba434a2d59f8ce46528ff3946 ] Currently "bond_should_notify_peers: slave ..." messages are printed whenever "bond_should_notify_peers" function is called. +++ Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 ... Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 +++ This is confusing and can also clutter up debug logs. Print logs only when the peer notification happens. Signed-off-by: Suresh Kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27x86/mce: Mark mce_read_aux() noinstrBorislav Petkov1-1/+1
[ Upstream commit db6c996d6ce45dfb44891f0824a65ecec216f47a ] Fixes vmlinux.o: warning: objtool: do_machine_check()+0x681: call to mce_read_aux() leaves .noinstr.text section Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211208111343.8130-10-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27x86/mce: Mark mce_end() noinstrBorislav Petkov1-3/+11
[ Upstream commit b4813539d37fa31fed62cdfab7bd2dd8929c5b2e ] It is called by the #MC handler which is noinstr. Fixes vmlinux.o: warning: objtool: do_machine_check()+0xbd6: call to memset() leaves .noinstr.text section Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211208111343.8130-9-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27x86/mce: Mark mce_panic() noinstrBorislav Petkov1-3/+12
[ Upstream commit 3c7ce80a818fa7950be123cac80cd078e5ac1013 ] And allow instrumentation inside it because it does calls to other facilities which will not be tagged noinstr. Fixes vmlinux.o: warning: objtool: do_machine_check()+0xc73: call to mce_panic() leaves .noinstr.text section Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211208111343.8130-8-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27x86/mce: Allow instrumentation during task work queueingBorislav Petkov1-0/+11
[ Upstream commit 4fbce464db81a42f9a57ee242d6150ec7f996415 ] Fixes vmlinux.o: warning: objtool: do_machine_check()+0xdb1: call to queue_task_work() leaves .noinstr.text section Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20211208111343.8130-6-bp@alien8.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath11k: Avoid false DEADLOCK warning reported by lockdepBaochen Qiang2-0/+24
[ Upstream commit 767c94caf0efad136157110787fe221b74cb5c8a ] With CONFIG_LOCKDEP=y and CONFIG_DEBUG_SPINLOCK=y, lockdep reports below warning: [ 166.059415] ============================================ [ 166.059416] WARNING: possible recursive locking detected [ 166.059418] 5.15.0-wt-ath+ #10 Tainted: G W O [ 166.059420] -------------------------------------------- [ 166.059421] kworker/0:2/116 is trying to acquire lock: [ 166.059423] ffff9905f2083160 (&srng->lock){+.-.}-{2:2}, at: ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059440] but task is already holding lock: [ 166.059442] ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059491] other info that might help us debug this: [ 166.059492] Possible unsafe locking scenario: [ 166.059493] CPU0 [ 166.059494] ---- [ 166.059495] lock(&srng->lock); [ 166.059498] lock(&srng->lock); [ 166.059500] *** DEADLOCK *** [ 166.059501] May be due to missing lock nesting notation [ 166.059502] 3 locks held by kworker/0:2/116: [ 166.059504] #0: ffff9905c0081548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059511] #1: ffff9d2400a5fe68 ((debug_obj_work).work){+.+.}-{0:0}, at: process_one_work+0x1f6/0x660 [ 166.059517] #2: ffff9905f2083230 (&srng->lock){+.-.}-{2:2}, at: ath11k_dp_process_reo_status+0x95/0x2d0 [ath11k] [ 166.059532] stack backtrace: [ 166.059534] CPU: 0 PID: 116 Comm: kworker/0:2 Kdump: loaded Tainted: G W O 5.15.0-wt-ath+ #10 [ 166.059537] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0059.2019.1112.1124 11/12/2019 [ 166.059539] Workqueue: events free_obj_work [ 166.059543] Call Trace: [ 166.059545] <IRQ> [ 166.059547] dump_stack_lvl+0x56/0x7b [ 166.059552] __lock_acquire+0xb9a/0x1a50 [ 166.059556] lock_acquire+0x1e2/0x330 [ 166.059560] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059571] _raw_spin_lock_bh+0x33/0x70 [ 166.059574] ? ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059584] ath11k_hal_reo_cmd_send+0x20/0x490 [ath11k] [ 166.059594] ath11k_dp_tx_send_reo_cmd+0x3f/0x130 [ath11k] [ 166.059605] ath11k_dp_rx_tid_del_func+0x221/0x370 [ath11k] [ 166.059618] ath11k_dp_process_reo_status+0x22f/0x2d0 [ath11k] [ 166.059632] ? ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059643] ath11k_dp_service_srng+0x2ea/0x2f0 [ath11k] [ 166.059655] ath11k_pci_ext_grp_napi_poll+0x1c/0x70 [ath11k_pci] [ 166.059659] __napi_poll+0x28/0x230 [ 166.059664] net_rx_action+0x285/0x310 [ 166.059668] __do_softirq+0xe6/0x4d2 [ 166.059672] irq_exit_rcu+0xd2/0xf0 [ 166.059675] common_interrupt+0xa5/0xc0 [ 166.059678] </IRQ> [ 166.059679] <TASK> [ 166.059680] asm_common_interrupt+0x1e/0x40 [ 166.059683] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 166.059686] Code: 83 c7 18 e8 2a 95 43 ff 48 89 ef e8 22 d2 43 ff 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 63 2e 40 ff 65 8b 05 8c 59 97 5c 85 c0 74 0a 5b 5d c3 e8 00 6a [ 166.059689] RSP: 0018:ffff9d2400a5fca0 EFLAGS: 00000206 [ 166.059692] RAX: 0000000000000002 RBX: 0000000000000200 RCX: 0000000000000006 [ 166.059694] RDX: 0000000000000000 RSI: ffffffffa404879b RDI: 0000000000000001 [ 166.059696] RBP: ffff9905c0053000 R08: 0000000000000001 R09: 0000000000000001 [ 166.059698] R10: ffff9d2400a5fc50 R11: 0000000000000001 R12: ffffe186c41e2840 [ 166.059700] R13: 0000000000000001 R14: ffff9905c78a1c68 R15: 0000000000000001 [ 166.059704] free_debug_processing+0x257/0x3d0 [ 166.059708] ? free_obj_work+0x1f5/0x250 [ 166.059712] __slab_free+0x374/0x5a0 [ 166.059718] ? kmem_cache_free+0x2e1/0x370 [ 166.059721] ? free_obj_work+0x1f5/0x250 [ 166.059724] kmem_cache_free+0x2e1/0x370 [ 166.059727] free_obj_work+0x1f5/0x250 [ 166.059731] process_one_work+0x28b/0x660 [ 166.059735] ? process_one_work+0x660/0x660 [ 166.059738] worker_thread+0x37/0x390 [ 166.059741] ? process_one_work+0x660/0x660 [ 166.059743] kthread+0x176/0x1a0 [ 166.059746] ? set_kthread_struct+0x40/0x40 [ 166.059749] ret_from_fork+0x22/0x30 [ 166.059754] </TASK> Since these two lockes are both initialized in ath11k_hal_srng_setup, they are assigned with the same key. As a result lockdep suspects that the task is trying to acquire the same lock (due to same key) while already holding it, and thus reports the DEADLOCK warning. However as they are different spinlock instances, the warning is false positive. On the other hand, even no dead lock indeed, this is a major issue for upstream regression testing as it disables lockdep functionality. Fix it by assigning separate lock class key for each srng->lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211209011949.151472-1-quic_bqiang@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27selftests/ftrace: make kprobe profile testcase description uniqueHeiko Carstens1-1/+1
[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ] Commit 32f6e5da83c7 ("selftests/ftrace: Add kprobe profile testcase") added a new kprobes testcase, but has a description which does not describe what the test case is doing and is duplicating the description of another test case. Therefore change the test case description, so it is unique and then allows easily to tell which test case actually passed or failed. Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27gpio: aspeed: Convert aspeed_gpio.lock to raw_spinlockIwona Winiarska1-26/+26
[ Upstream commit 61a7904b6ace99b1bde0d0e867fa3097f5c8cee2 ] The gpio-aspeed driver implements an irq_chip which need to be invoked from hardirq context. Since spin_lock() can sleep with PREEMPT_RT, it is no longer legal to invoke it while interrupts are disabled. This also causes lockdep to complain about: [ 0.649797] [ BUG: Invalid wait context ] because aspeed_gpio.lock (spin_lock_t) is taken under irq_desc.lock (raw_spinlock_t). Let's use of raw_spinlock_t instead of spinlock_t. Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net: phy: prefer 1000baseT over 1000baseKXRussell King (Oracle)1-1/+1
[ Upstream commit f20f94f7f52c4685c81754f489ffcc72186e8bdb ] The PHY settings table is supposed to be sorted by descending match priority - in other words, earlier entries are preferred over later entries. The order of 1000baseKX/Full and 1000baseT/Full is such that we prefer 1000baseKX/Full over 1000baseT/Full, but 1000baseKX/Full is a lot rarer than 1000baseT/Full, and thus is much less likely to be preferred. This causes phylink problems - it means a fixed link specifying a speed of 1G and full duplex gets an ethtool linkmode of 1000baseKX/Full rather than 1000baseT/Full as would be expected - and since we offer userspace a software emulation of a conventional copper PHY, we want to offer copper modes in preference to anything else. However, we do still want to allow the rarer modes as well. Hence, let's reorder these two modes to prefer copper. Tested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/E1muvFO-00F6jY-1K@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27net-sysfs: update the queue counts in the unregistration pathAntoine Tenart1-0/+3
[ Upstream commit d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ] When updating Rx and Tx queue kobjects, the queue count should always be updated to match the queue kobjects count. This was not done in the net device unregistration path, fix it. Tracking all queue count updates will allow in a following up patch to detect illegal updates. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath10k: Fix tx hangingSebastian Gottschall2-2/+3
[ Upstream commit e8a91863eba3966a447d2daa1526082d52b5db2a ] While running stress tests in roaming scenarios (switching ap's every 5 seconds, we discovered a issue which leads to tx hangings of exactly 5 seconds while or after scanning for new accesspoints. We found out that this hanging is triggered by ath10k_mac_wait_tx_complete since the empty_tx_wq was not wake when the num_tx_pending counter reaches zero. To fix this, we simply move the wake_up call to htt_tx_dec_pending, since this call was missed on several locations within the ath10k code. Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20210505085806.11474-1-s.gottschall@dd-wrt.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27ath11k: avoid deadlock by change ieee80211_queue_work for regd_update_workWen Gong1-1/+1
[ Upstream commit ed05c7cf1286d7e31e7623bce55ff135723591bf ] When enable debug config, it print below warning while shut down wlan interface shuh as run "ifconfig wlan0 down". The reason is because ar->regd_update_work is ran once, and it is will call wiphy_lock(ar->hw->wiphy) in function ath11k_regd_update() which is running in workqueue of ieee80211_local queued by ieee80211_queue_work(). Another thread from "ifconfig wlan0 down" will also accuqire the lock by wiphy_lock(sdata->local->hw.wiphy) in function ieee80211_stop(), and then it call ieee80211_stop_device() to flush_workqueue(local->workqueue), this will wait the workqueue of ieee80211_local finished. Then deadlock will happen easily if the two thread run meanwhile. Below warning disappeared after this change. [ 914.088798] ath11k_pci 0000:05:00.0: mac remove interface (vdev 0) [ 914.088806] ath11k_pci 0000:05:00.0: mac stop 11d scan [ 914.088810] ath11k_pci 0000:05:00.0: mac stop 11d vdev id 0 [ 914.088827] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.088841] ath11k_pci 0000:05:00.0: send 11d scan stop vdev id 0 [ 914.088849] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.088856] ath11k_pci 0000:05:00.0: htc insufficient credits ep 2 required 1 available 0 [ 914.096434] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.096442] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.096481] ath11k_pci 0000:05:00.0: htc ep 2 consumed 1 credits (total 0) [ 914.096491] ath11k_pci 0000:05:00.0: WMI vdev delete id 0 [ 914.111598] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 16 [ 914.111628] ath11k_pci 0000:05:00.0: htc ep 2 got 1 credits (total 1) [ 914.114659] ath11k_pci 0000:05:00.0: rx ce pipe 2 len 20 [ 914.114742] ath11k_pci 0000:05:00.0: htc rx completion ep 2 skb pK-error [ 914.115977] ath11k_pci 0000:05:00.0: vdev delete resp for vdev id 0 [ 914.116685] ath11k_pci 0000:05:00.0: vdev 00:03:7f:29:61:11 deleted, vdev_id 0 [ 914.117583] ====================================================== [ 914.117592] WARNING: possible circular locking dependency detected [ 914.117600] 5.16.0-rc1-wt-ath+ #1 Tainted: G OE [ 914.117611] ------------------------------------------------------ [ 914.117618] ifconfig/2805 is trying to acquire lock: [ 914.117628] ffff9c00a62bb548 ((wq_completion)phy0){+.+.}-{0:0}, at: flush_workqueue+0x87/0x470 [ 914.117674] but task is already holding lock: [ 914.117682] ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.117872] which lock already depends on the new lock. [ 914.117880] the existing dependency chain (in reverse order) is: [ 914.117888] -> #3 (&rdev->wiphy.mtx){+.+.}-{4:4}: [ 914.117910] __mutex_lock+0xa0/0x9c0 [ 914.117930] mutex_lock_nested+0x1b/0x20 [ 914.117944] reg_process_self_managed_hints+0x3a/0xb0 [cfg80211] [ 914.118093] wiphy_regulatory_register+0x47/0x80 [cfg80211] [ 914.118229] wiphy_register+0x84f/0x9c0 [cfg80211] [ 914.118353] ieee80211_register_hw+0x6b1/0xd90 [mac80211] [ 914.118486] ath11k_mac_register+0x6af/0xb60 [ath11k] [ 914.118550] ath11k_core_qmi_firmware_ready+0x383/0x4a0 [ath11k] [ 914.118598] ath11k_qmi_driver_event_work+0x347/0x4a0 [ath11k] [ 914.118656] process_one_work+0x228/0x670 [ 914.118669] worker_thread+0x4d/0x440 [ 914.118680] kthread+0x16d/0x1b0 [ 914.118697] ret_from_fork+0x22/0x30 [ 914.118714] -> #2 (rtnl_mutex){+.+.}-{4:4}: [ 914.118736] __mutex_lock+0xa0/0x9c0 [ 914.118751] mutex_lock_nested+0x1b/0x20 [ 914.118767] rtnl_lock+0x17/0x20 [ 914.118783] ath11k_regd_update+0x15a/0x260 [ath11k] [ 914.118841] ath11k_regd_update_work+0x15/0x20 [ath11k] [ 914.118897] process_one_work+0x228/0x670 [ 914.118909] worker_thread+0x4d/0x440 [ 914.118920] kthread+0x16d/0x1b0 [ 914.118934] ret_from_fork+0x22/0x30 [ 914.118948] -> #1 ((work_completion)(&ar->regd_update_work)){+.+.}-{0:0}: [ 914.118972] process_one_work+0x1fa/0x670 [ 914.118984] worker_thread+0x4d/0x440 [ 914.118996] kthread+0x16d/0x1b0 [ 914.119010] ret_from_fork+0x22/0x30 [ 914.119023] -> #0 ((wq_completion)phy0){+.+.}-{0:0}: [ 914.119045] __lock_acquire+0x146d/0x1cf0 [ 914.119057] lock_acquire+0x19b/0x360 [ 914.119067] flush_workqueue+0xae/0x470 [ 914.119084] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.119260] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.119409] ieee80211_stop+0x45/0x180 [mac80211] [ 914.119557] __dev_close_many+0xb3/0x120 [ 914.119573] __dev_change_flags+0xc3/0x1d0 [ 914.119590] dev_change_flags+0x29/0x70 [ 914.119605] devinet_ioctl+0x653/0x810 [ 914.119620] inet_ioctl+0x193/0x1e0 [ 914.119631] sock_do_ioctl+0x4d/0xf0 [ 914.119649] sock_ioctl+0x262/0x340 [ 914.119665] __x64_sys_ioctl+0x96/0xd0 [ 914.119678] do_syscall_64+0x3d/0xd0 [ 914.119694] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.119709] other info that might help us debug this: [ 914.119717] Chain exists of: (wq_completion)phy0 --> rtnl_mutex --> &rdev->wiphy.mtx [ 914.119745] Possible unsafe locking scenario: [ 914.119752] CPU0 CPU1 [ 914.119758] ---- ---- [ 914.119765] lock(&rdev->wiphy.mtx); [ 914.119778] lock(rtnl_mutex); [ 914.119792] lock(&rdev->wiphy.mtx); [ 914.119807] lock((wq_completion)phy0); [ 914.119819] *** DEADLOCK *** [ 914.119827] 2 locks held by ifconfig/2805: [ 914.119837] #0: ffffffffba3dc010 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_lock+0x17/0x20 [ 914.119872] #1: ffff9c00baea07d0 (&rdev->wiphy.mtx){+.+.}-{4:4}, at: ieee80211_stop+0x38/0x180 [mac80211] [ 914.120039] stack backtrace: [ 914.120048] CPU: 0 PID: 2805 Comm: ifconfig Tainted: G OE 5.16.0-rc1-wt-ath+ #1 [ 914.120064] Hardware name: LENOVO 418065C/418065C, BIOS 83ET63WW (1.33 ) 07/29/2011 [ 914.120074] Call Trace: [ 914.120084] <TASK> [ 914.120094] dump_stack_lvl+0x73/0xa4 [ 914.120119] dump_stack+0x10/0x12 [ 914.120135] print_circular_bug.isra.44+0x221/0x2e0 [ 914.120165] check_noncircular+0x106/0x150 [ 914.120203] __lock_acquire+0x146d/0x1cf0 [ 914.120215] ? __lock_acquire+0x146d/0x1cf0 [ 914.120245] lock_acquire+0x19b/0x360 [ 914.120259] ? flush_workqueue+0x87/0x470 [ 914.120286] ? lockdep_init_map_type+0x6b/0x250 [ 914.120310] flush_workqueue+0xae/0x470 [ 914.120327] ? flush_workqueue+0x87/0x470 [ 914.120344] ? lockdep_hardirqs_on+0xd7/0x150 [ 914.120391] ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120565] ? ieee80211_stop_device+0x3b/0x50 [mac80211] [ 914.120736] ieee80211_do_stop+0x5d7/0x830 [mac80211] [ 914.120906] ieee80211_stop+0x45/0x180 [mac80211] [ 914.121060] __dev_close_many+0xb3/0x120 [ 914.121081] __dev_change_flags+0xc3/0x1d0 [ 914.121109] dev_change_flags+0x29/0x70 [ 914.121131] devinet_ioctl+0x653/0x810 [ 914.121149] ? __might_fault+0x77/0x80 [ 914.121179] inet_ioctl+0x193/0x1e0 [ 914.121194] ? inet_ioctl+0x193/0x1e0 [ 914.121218] ? __might_fault+0x77/0x80 [ 914.121238] ? _copy_to_user+0x68/0x80 [ 914.121266] sock_do_ioctl+0x4d/0xf0 [ 914.121283] ? inet_stream_connect+0x60/0x60 [ 914.121297] ? sock_do_ioctl+0x4d/0xf0 [ 914.121329] sock_ioctl+0x262/0x340 [ 914.121347] ? sock_ioctl+0x262/0x340 [ 914.121362] ? exit_to_user_mode_prepare+0x13b/0x280 [ 914.121388] ? syscall_enter_from_user_mode+0x20/0x50 [ 914.121416] __x64_sys_ioctl+0x96/0xd0 [ 914.121430] ? br_ioctl_call+0x90/0x90 [ 914.121445] ? __x64_sys_ioctl+0x96/0xd0 [ 914.121465] do_syscall_64+0x3d/0xd0 [ 914.121482] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 914.121497] RIP: 0033:0x7f0ed051737b [ 914.121513] Code: 0f 1e fa 48 8b 05 15 3b 0d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e5 3a 0d 00 f7 d8 64 89 01 48 [ 914.121527] RSP: 002b:00007fff7be38b98 EFLAGS: 00000202 ORIG_RAX: 0000000000000010 [ 914.121544] RAX: ffffffffffffffda RBX: 00007fff7be38ba0 RCX: 00007f0ed051737b [ 914.121555] RDX: 00007fff7be38ba0 RSI: 0000000000008914 RDI: 0000000000000004 [ 914.121566] RBP: 00007fff7be38c60 R08: 000000000000000a R09: 0000000000000001 [ 914.121576] R10: 0000000000000000 R11: 0000000000000202 R12: 00000000fffffffe [ 914.121586] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 [ 914.121620] </TASK> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20211201071745.17746-2-quic_wgong@quicinc.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: avoid clearing a just saved session protection idShaul Triebitz1-6/+6
[ Upstream commit 8e967c137df3b236d2075f9538cb888129425d1a ] When scheduling a session protection the id is saved but then it may be cleared when calling iwl_mvm_te_clear_data (if a previous session protection is currently active). Fix it by saving the id after calling iwl_mvm_te_clear_data. Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204130722.b0743a588d14.I098fef6677d0dab3ef1b6183ed206a10bab01eb2@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-27iwlwifi: mvm: synchronize with FW after multicast commandsJohannes Berg1-0/+17
[ Upstream commit db66abeea3aefed481391ecc564fb7b7fb31d742 ] If userspace installs a lot of multicast groups very quickly, then we may run out of command queue space as we send the updates in an asynchronous fashion (due to locking concerns), and the CPU can create them faster than the firmware can process them. This is true even when mac80211 has a work struct that gets scheduled. Fix this by synchronizing with the firmware after sending all those commands - outside of the iteration we can send a synchronous echo command that just has the effect of the CPU waiting for the prior asynchronous commands to finish. This also will cause fewer of the commands to be sent to the firmware overall, because the work will only run once when rescheduled multiple times while it's running. Link: https://bugzilla.kernel.org/show_bug.cgi?id=213649 Suggested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reported-by: Maximilian Ernestus <maximilian@ernestus.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20211204083238.51aea5b79ea4.I88a44798efda16e9fe480fb3e94224931d311b29@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-19 18:58:43 +0300