summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25locking/atomic: Make test_and_*_bit() ordered on failureHector Martin2-7/+1
commit 415d832497098030241605c52ea83d4e2cfa7879 upstream. These operations are documented as always ordered in include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer type use cases where one side needs to ensure a flag is left pending after some shared data was updated rely on this ordering, even in the failure case. This is the case with the workqueue code, which currently suffers from a reproducible ordering violation on Apple M1 platforms (which are notoriously out-of-order) that ends up causing the TTY layer to fail to deliver data to userspace properly under the right conditions. This change fixes that bug. Change the documentation to restrict the "no order on failure" story to the _lock() variant (for which it makes sense), and remove the early-exit from the generic implementation, which is what causes the missing barrier semantics in that case. Without this, the remaining atomic op is fully ordered (including on ARM64 LSE, as of recent versions of the architecture spec). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs") Fixes: 61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()") Signed-off-by: Hector Martin <marcan@marcan.st> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a fileAndrew Donnellan1-1/+1
commit 012e8d2034f1bda8863435cd589636e618d6a659 upstream. Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and node_random()") refactored some code by moving node_random() from lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to include random.h, which conditionally defines add_latent_entropy() depending on whether the macro LATENT_ENTROPY_PLUGIN is defined. This broke the build on powerpc, where nodemask.h is indirectly included in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that is excluded from the latent entropy plugin using DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN. This leads to the following: CC arch/powerpc/kernel/prom_init.o In file included from ./include/linux/nodemask.h:97, from ./include/linux/mmzone.h:17, from ./include/linux/gfp.h:7, from ./include/linux/xarray.h:15, from ./include/linux/radix-tree.h:21, from ./include/linux/idr.h:15, from ./include/linux/kernfs.h:12, from ./include/linux/sysfs.h:16, from ./include/linux/kobject.h:20, from ./include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: ./include/linux/random.h: In function 'add_latent_entropy': ./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy ./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1 make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2 make: *** [Makefile:1855: arch/powerpc] Error 2 Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine LATENT_ENTROPY_PLUGIN for files where the plugin is disabled. Cc: Yury Norov <yury.norov@gmail.com> Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367 Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/ Reported-by: Erhard Furtner <erhard_f@mailbox.org> Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25kbuild: fix the modules order between drivers and libsMasahiro Yamada1-4/+2
commit 113147510b48e764e624e3d0e6707a1e48bc05a9 upstream. Commit b2c885549122 ("kbuild: update modules.order only when contained modules are updated") accidentally changed the modules order. Prior to that commit, the modules order was determined based on vmlinux-dirs, which lists core-y/m, drivers-y/m, libs-y/m, in this order. Now, subdir-modorder lists them in a different order: core-y/m, libs-y/m, drivers-y/m. Presumably, there was no practical issue because the modules in drivers and libs are orthogonal, but there is no reason to have this distortion. Get back to the original order. Fixes: b2c885549122 ("kbuild: update modules.order only when contained modules are updated") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25igb: Add lock to avoid data raceLin Ma2-1/+13
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream. The commit c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834ce541 ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25stmmac: intel: Add a missing clk_disable_unprepare() call in ↵Christophe JAILLET1-0/+1
intel_eth_pci_remove() commit 5c23d6b717e4e956376f3852b90f58e262946b50 upstream. Commit 09f012e64e4b ("stmmac: intel: Fix clock handling on error and remove paths") removed this clk_disable_unprepare() This was partly revert by commit ac322f86b56c ("net: stmmac: Fix clock handling on remove path") which removed this clk_disable_unprepare() because: " While unloading the dwmac-intel driver, clk_disable_unprepare() is being called twice in stmmac_dvr_remove() and intel_eth_pci_remove(). This causes kernel panic on the second call. " However later on, commit 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver") has updated stmmac_dvr_remove() which do not call clk_disable_unprepare() anymore. So this call should now be called from intel_eth_pci_remove(). Fixes: 5ec55823438e8 ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/d7c8c1dadf40df3a7c9e643f76ffadd0ccc1ad1b.1660659689.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25fec: Fix timer capture timing in `fec_ptp_enable_pps()`Csókás Bence1-5/+1
commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream. Code reimplements functionality already in `fec_ptp_read()`, but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call. Fixes: 28b5f058cf1d ("net: fec: ptp: fix convergence issue to support LinuxPTP stack") Signed-off-by: Csókás Bence <csokas.bence@prolan.hu> Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream. When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25regulator: pca9450: Remove restrictions for regulator-nameFrieder Schrempf1-11/+0
commit b0de7fa706506bf0591037908376351beda8c5d6 upstream. The device bindings shouldn't put any constraints on the regulator-name property specified in the generic bindings. This allows using arbitrary and descriptive names for the regulators. Suggested-by: Mark Brown <broonie@kernel.org> Fixes: 7ae9e3a6bf3f ("dt-bindings: regulator: add pca9450 regulator yaml") Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de> Link: https://lore.kernel.org/r/20220802064335.8481-1-frieder@fris.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25i2c: imx: Make sure to unregister adapter on remove()Uwe Kleine-König1-9/+11
commit d98bdd3a5b50446d8e010be5b04ce81c4eabf728 upstream. If for whatever reasons pm_runtime_resume_and_get() fails and .remove() is exited early, the i2c adapter stays around and the irq still calls its handler, while the driver data and the register mapping go away. So if later the i2c adapter is accessed or the irq triggers this results in havoc accessing freed memory and unmapped registers. So unregister the software resources even if resume failed, and only skip the hardware access in that case. Fixes: 588eb93ea49f ("i2c: imx: add runtime pm support to improve the performance") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ice: Ignore EEXIST when setting promisc modeGrzegorz Siwik1-1/+1
commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream. Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()Rustam Subkhankulov1-1/+1
commit fd8e899cdb5ecaf8e8ee73854a99e10807eef1de upstream. If an error occurs in dsa_devlink_region_create(), then 'priv->regions' array will be accessed by negative index '-1'. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru> Fixes: bf425b82059e ("net: dsa: sja1105: expose static config as devlink region") Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: genl: fix error path memory leak in policy dumpingJakub Kicinski2-3/+17
commit 249801360db3dec4f73768c502192020bfddeacc upstream. If construction of the array of policies fails when recording non-first policy we need to unwind. netlink_policy_dump_add_policy() itself also needs fixing as it currently gives up on error without recording the allocated pointer in the pstate pointer. Reported-by: syzbot+dc54d9ba8153b216cae0@syzkaller.appspotmail.com Fixes: 50a896cf2d6f ("genetlink: properly support per-op policy dumping") Link: https://lore.kernel.org/r/20220816161939.577583-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet countersVladimir Oltean1-1/+2
commit 40d21c4565bce064c73a03b79a157a3493c518b9 upstream. What the driver actually reports as 256-511 is in fact 512-1023, and the TX packets in the 256-511 bucket are not reported. Fix that. Fixes: 56051948773e ("net: dsa: ocelot: add driver for Felix switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: dsa: microchip: ksz9477: fix fdb_dump last invalid entryArun Ramadoss1-0/+3
commit 36c0d935015766bf20d621c18313f17691bda5e3 upstream. In the ksz9477_fdb_dump function it reads the ALU control register and exit from the timeout loop if there is valid entry or search is complete. After exiting the loop, it reads the alu entry and report to the user space irrespective of entry is valid. It works till the valid entry. If the loop exited when search is complete, it reads the alu table. The table returns all ones and it is reported to user space. So bridge fdb show gives ff:ff:ff:ff:ff:ff as last entry for every port. To fix it, after exiting the loop the entry is reported only if it is valid one. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220816105516.18350-1-arun.ramadoss@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: moxa: pass pdev instead of ndev to DMA functionsSergei Antonov1-10/+10
commit 3a12df22a8f68954a4ba48435c06b3d1791c87c4 upstream. dma_map_single() calls fail in moxart_mac_setup_desc_ring() and moxart_mac_start_xmit() which leads to an incessant output of this: [ 16.043925] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.050957] moxart-ethernet 92000000.mac eth0: DMA mapping error [ 16.058229] moxart-ethernet 92000000.mac eth0: DMA mapping error Passing pdev to DMA is a common approach among net drivers. Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Suggested-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220812171339.2271788-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25net: dsa: mv88e6060: prevent crash on an unused portSergei Antonov1-0/+3
commit 246bbf2f977ea36aaf41f5d24370fef433250728 upstream. If the port isn't a CPU port nor a user port, 'cpu_dp' is a null pointer and a crash happened on dereferencing it in mv88e6060_setup_port(): [ 9.575872] Unable to handle kernel NULL pointer dereference at virtual address 00000014 ... [ 9.942216] mv88e6060_setup from dsa_register_switch+0x814/0xe84 [ 9.948616] dsa_register_switch from mdio_probe+0x2c/0x54 [ 9.954433] mdio_probe from really_probe.part.0+0x98/0x2a0 [ 9.960375] really_probe.part.0 from driver_probe_device+0x30/0x10c [ 9.967029] driver_probe_device from __device_attach_driver+0xb8/0x13c [ 9.973946] __device_attach_driver from bus_for_each_drv+0x90/0xe0 [ 9.980509] bus_for_each_drv from __device_attach+0x110/0x184 [ 9.986632] __device_attach from bus_probe_device+0x8c/0x94 [ 9.992577] bus_probe_device from deferred_probe_work_func+0x78/0xa8 [ 9.999311] deferred_probe_work_func from process_one_work+0x290/0x73c [ 10.006292] process_one_work from worker_thread+0x30/0x4b8 [ 10.012155] worker_thread from kthread+0xd4/0x10c [ 10.017238] kthread from ret_from_fork+0x14/0x3c Fixes: 0abfd494deef ("net: dsa: use dedicated CPU port") CC: Vivien Didelot <vivien.didelot@savoirfairelinux.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sergei Antonov <saproj@gmail.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20220811070939.1717146-1-saproj@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25spi: meson-spicc: add local pow2 clock ops to preserve rate between messagesNeil Armstrong1-28/+101
commit 09992025dacd258c823f50e82db09d7ef06cdac4 upstream. At the end of a message, the HW gets a reset in meson_spicc_unprepare_transfer(), this resets the SPICC_CONREG register and notably the value set by the Common Clock Framework. This is problematic because: - the register value CCF can be different from the corresponding CCF cached rate - CCF is allowed to change the clock rate whenever the HW state This introduces: - local pow2 clock ops checking the HW state before allowing a clock operation - separation of legacy pow2 clock patch and new enhanced clock path - SPICC_CONREG datarate value is now value kepts across messages It has been checked that: - SPICC_CONREG datarate value is kept across messages - CCF is only allowed to change the SPICC_CONREG datarate value when busy - SPICC_CONREG datarate value is correct for each transfer This didn't appear before commit 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support") because we recalculated and wrote the rate for each xfer. Fixes: 3e0cf4d3fc29 ("spi: meson-spicc: add a linear clock divider support") Reported-by: Da Xue <da@libre.computer> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220811134445.678446-1-narmstrong@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25powerpc/pci: Fix get_phb_number() lockingMichael Ellerman1-6/+10
commit 8d48562a2729742f767b0fdd994d6b2a56a49c63 upstream. The recent change to get_phb_number() causes a DEBUG_ATOMIC_SLEEP warning on some systems: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 1 lock held by swapper/1: #0: c157efb0 (hose_spinlock){+.+.}-{2:2}, at: pcibios_alloc_controller+0x64/0x220 Preemption disabled at: [<00000000>] 0x0 CPU: 0 PID: 1 Comm: swapper Not tainted 5.19.0-yocto-standard+ #1 Call Trace: [d101dc90] [c073b264] dump_stack_lvl+0x50/0x8c (unreliable) [d101dcb0] [c0093b70] __might_resched+0x258/0x2a8 [d101dcd0] [c0d3e634] __mutex_lock+0x6c/0x6ec [d101dd50] [c0a84174] of_alias_get_id+0x50/0xf4 [d101dd80] [c002ec78] pcibios_alloc_controller+0x1b8/0x220 [d101ddd0] [c140c9dc] pmac_pci_init+0x198/0x784 [d101de50] [c140852c] discover_phbs+0x30/0x4c [d101de60] [c0007fd4] do_one_initcall+0x94/0x344 [d101ded0] [c1403b40] kernel_init_freeable+0x1a8/0x22c [d101df10] [c00086e0] kernel_init+0x34/0x160 [d101df30] [c001b334] ret_from_kernel_thread+0x5c/0x64 This is because pcibios_alloc_controller() holds hose_spinlock but of_alias_get_id() takes of_mutex which can sleep. The hose_spinlock protects the phb_bitmap, and also the hose_list, but it doesn't need to be held while get_phb_number() calls the OF routines, because those are only looking up information in the device tree. So fix it by having get_phb_number() take the hose_spinlock itself, only where required, and then dropping the lock before returning. pcibios_alloc_controller() then needs to take the lock again before the list_add() but that's safe, the order of the list is not important. Fixes: 0fe1e96fef0a ("powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220815065550.1303620-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specifiedPablo Neira Ayuso1-0/+5
commit 1b6345d4160ecd3d04bd8cd75df90c67811e8cc9 upstream. Since f3a2181e16f1 ("netfilter: nf_tables: Support for sets with multiple ranged fields"), it possible to combine intervals and concatenations. Later on, ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") provides the NFT_SET_CONCAT flag for userspace to report that the set stores a concatenation. Make sure NFT_SET_CONCAT is set on if field_count is specified for consistency. Otherwise, if NFT_SET_CONCAT is specified with no field_count, bail out with EINVAL. Fixes: ef516e8625dd ("netfilter: nf_tables: reintroduce the NFT_SET_CONCAT flag") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flagPablo Neira Ayuso1-4/+9
commit 5a2f3dc31811e93be15522d9eb13ed61460b76c8 upstream. If the NFTA_SET_ELEM_OBJREF netlink attribute is present and NFT_SET_OBJECT flag is set on, report EINVAL. Move existing sanity check earlier to validate that NFT_SET_OBJECT requires NFTA_SET_ELEM_OBJREF. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25netfilter: nf_tables: really skip inactive sets when allocating namePablo Neira Ayuso1-1/+1
commit 271c5ca826e0c3c53e0eb4032f8eaedea1ee391c upstream. While looping to build the bitmap of used anonymous set names, check the current set in the iteration, instead of the one that is being created. Fixes: 37a9cc525525 ("netfilter: nf_tables: add generation mask to sets") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ASoC: tas2770: Fix handling of mute/unmuteMartin Povišer2-27/+32
commit 1e5907bcb3a3b569be0a03ebe668bba2ed320a50 upstream. Because the PWR_CTRL field is modeled as the power state of the DAC widget, and at the same time it is used to implement mute/unmute, we need some additional book-keeping to have the right end result no matter the sequence of calls. Without this fix, one can mute an ongoing stream by toggling a speaker pin control. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220808141246.5749-5-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ASoC: tas2770: Drop conflicting set_bias_level power settingMartin Povišer1-33/+0
commit 482c23fbc7e9bf5a7a74defd0735d5346215db58 upstream. The driver is setting the PWR_CTRL field in both the set_bias_level callback and on DAPM events of the DAC widget (and also in the mute_stream method). Drop the set_bias_level callback altogether as the power setting it does is in conflict with the other code paths. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220808141246.5749-4-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ASoC: tas2770: Allow mono streamsMartin Povišer1-1/+1
commit bf54d97a835dfe62d4d29e245e170c63d0089be7 upstream. The part is a mono speaker amp, but it can do downmix and switch between left and right channel, so the right channel range is 1 to 2. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220808141246.5749-3-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ASoC: tas2770: Set correct FSYNC polarityMartin Povišer2-1/+22
commit e9ac31f0a5d0e246b046c20348954519f91a297f upstream. Fix setting of FSYNC polarity for DAI formats other than I2S. Also add support for polarity inversion. Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Link: https://lore.kernel.org/r/20220808141246.5749-2-povik+lin@cutebit.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25iavf: Fix adminq error handlingPrzemyslaw Patynowski1-2/+13
commit 419831617ed349992c84344dbd9e627f9e68f842 upstream. iavf_alloc_asq_bufs/iavf_alloc_arq_bufs allocates with dma_alloc_coherent memory for VF mailbox. Free DMA regions for both ASQ and ARQ in case error happens during configuration of ASQ/ARQ registers. Without this change it is possible to see when unloading interface: 74626.583369: dma_debug_device_change: device driver has pending DMA allocations while released from device [count=32] One of leaked entries details: [device address=0x0000000b27ff9000] [size=4096 bytes] [mapped with DMA_BIDIRECTIONAL] [mapped as coherent] Fixes: d358aa9a7a2d ("i40evf: init code and hardware support") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: add force_successful_syscall_return()Al Viro2-0/+8
commit fd0c153daad135d0ec1a53c5dbe6936a724d6ae1 upstream. If we use the ancient SysV syscall ABI, we'd better have tell the kernel how to claim that a negative return value is a success. Use ->orig_r2 for that - it's inaccessible via ptrace, so it's a fair game for changes and it's normally[*] non-negative on return from syscall. Set to -1; syscall is not going to be restart-worthy by definition, so we won't interfere with that use either. [*] the only exception is rt_sigreturn(), where we skip the entire messing with r1/r2 anyway. Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: restarts apply only to the first sigframe we build...Al Viro1-0/+1
commit 411a76b7219555c55867466c82d70ce928d6c9e1 upstream. Fixes: b53e906d255d ("nios2: Signal handling support") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: fix syscall restart checksAl Viro1-1/+1
commit 2d631bd58fe0ea3e3350212e23c9aba1fb606514 upstream. sys_foo() returns -512 (aka -ERESTARTSYS) => do_signal() sees 512 in r2 and 1 in r1. sys_foo() returns 512 => do_signal() sees 512 in r2 and 0 in r1. The former is restart-worthy; the latter obviously isn't. Fixes: b53e906d255d ("nios2: Signal handling support") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: traced syscall does need to check the syscall numberAl Viro1-3/+8
commit 25ba820ef36bdbaf9884adeac69b6e1821a7df76 upstream. all checks done before letting the tracer modify the register state are worthless... Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: don't leave NULLs in sys_call_table[]Al Viro2-1/+1
commit 45ec746c65097c25e77d24eae8fee0def5b6cc5d upstream. fill the gaps in there with sys_ni_syscall, as everyone does... Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nios2: page fault et.al. are *not* restartable syscalls...Al Viro2-4/+3
commit 8535c239ac674f7ead0f2652932d35c52c4123b2 upstream. make sure that ->orig_r2 is negative for everything except the syscalls. Fixes: 82ed08dd1b0e ("nios2: Exception handling") Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25dpaa2-eth: trace the allocated address instead of page structChen Lin1-2/+2
commit e34f49348f8b7a53205b6f77707a3a6a40cf420b upstream. We should trace the allocated address instead of page struct. Fixes: 27c874867c4e ("dpaa2-eth: Use a single page per Rx buffer") Signed-off-by: Chen Lin <chen.lin5@zte.com.cn> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20220811151651.3327-1-chen45464546@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25perf probe: Fix an error handling path in 'parse_perf_probe_command()'Christophe JAILLET1-2/+4
commit 4bf6dcaa93bcd083a13c278a91418fe10e6d23a0 upstream. If a memory allocation fail, we should branch to the error handling path in order to free some resources allocated a few lines above. Fixes: 15354d54698648e2 ("perf probe: Generate event name with line number") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: kernel-janitors@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/b71bcb01fa0c7b9778647235c3ab490f699ba278.1659797452.git.christophe.jaillet@wanadoo.fr Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25geneve: fix TOS inheriting for ipv4Matthias May1-4/+8
commit b4ab94d6adaa5cf842b68bd28f4b50bc774496bd upstream. The current code retrieves the TOS field after the lookup on the ipv4 routing table. The routing process currently only allows routing based on the original 3 TOS bits, and not on the full 6 DSCP bits. As a result the retrieved TOS is cut to the 3 bits. However for inheriting purposes the full 6 bits should be used. Extract the full 6 bits before the route lookup and use that instead of the cut off 3 TOS bits. Fixes: e305ac6cf5a1 ("geneve: Add support to collect tunnel metadata.") Signed-off-by: Matthias May <matthias.may@westermo.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25atm: idt77252: fix use-after-free bugs caused by tst_timerDuoming Zhou1-0/+1
commit 3f4093e2bf4673f218c0bf17d8362337c400e77b upstream. There are use-after-free bugs caused by tst_timer. The root cause is that there are no functions to stop tst_timer in idt77252_exit(). One of the possible race conditions is shown below: (thread 1) | (thread 2) | idt77252_init_one | init_card | fill_tst | mod_timer(&card->tst_timer, ...) idt77252_exit | (wait a time) | tst_timer | | ... kfree(card) // FREE | | card->soft_tst[e] // USE The idt77252_dev is deallocated in idt77252_exit() and used in timer handler. This patch adds del_timer_sync() in idt77252_exit() in order that the timer handler could be stopped before the idt77252_dev is deallocated. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220805070008.18007-1-duoming@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25xen/xenbus: fix return type in xenbus_file_read()Dan Carpenter1-2/+2
commit 32ad11127b95236dfc52375f3707853194a7f4b4 upstream. This code tries to store -EFAULT in an unsigned int. The xenbus_file_read() function returns type ssize_t so the negative value is returned as a positive value to the user. This change forces another change to the min() macro. Originally, the min() macro used "unsigned" type which checkpatch complains about. Also unsigned type would break if "len" were not capped at MAX_RW_COUNT. Use size_t for the min(). (No effect on runtime for the min_t() change). Fixes: 2fb3683e7b16 ("xen: Add xenbus device driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Link: https://lore.kernel.org/r/YutxJUaUYRG/VLVc@kili Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25nfp: ethtool: fix the display error of `ethtool -m DEVNAME`Yu Xiao1-0/+2
commit 4ae97cae07e15d41e5c0ebabba64c6eefdeb0bbe upstream. The port flag isn't set to `NFP_PORT_CHANGED` when using `ethtool -m DEVNAME` before, so the port state (e.g. interface) cannot be updated. Therefore, it caused that `ethtool -m DEVNAME` sometimes cannot read the correct information. E.g. `ethtool -m DEVNAME` cannot work when load driver before plug in optical module, as the port interface is still NONE without port update. Now update the port state before sending info to NIC to ensure that port interface is correct (latest state). Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM") Reviewed-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: Yu Xiao <yu.xiao@corigine.com> Signed-off-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220802093355.69065-1-simon.horman@corigine.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25NTB: ntb_tool: uninitialized heap data in tool_fn_write()Dan Carpenter1-3/+5
commit 45e1058b77feade4e36402828bfe3e0d3363177b upstream. The call to: ret = simple_write_to_buffer(buf, size, offp, ubuf, size); will return success if it is able to write even one byte to "buf". The value of "*offp" controls which byte. This could result in reading uninitialized data when we do the sscanf() on the next line. This code is not really desigined to handle partial writes where *offp is non-zero and the "buf" is preserved and re-used between writes. Just ban partial writes and replace the simple_write_to_buffer() with copy_from_user(). Fixes: 578b881ba9c4 ("NTB: Add tool test client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25tools build: Switch to new openssl API for test-libcryptoRoberto Sassu1-4/+11
commit 5b245985a6de5ac18b5088c37068816d413fb8ed upstream. Switch to new EVP API for detecting libcrypto, as Fedora 36 returns an error when it encounters the deprecated function MD5_Init() and the others. The error would be interpreted as missing libcrypto, while in reality it is not. Fixes: 6e8ccb4f624a73c5 ("tools/bpf: properly account for libbfd variations") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: bpf@vger.kernel.org Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: llvm@lists.linux.dev Cc: Martin KaFai Lau <martin.lau@linux.dev> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Nick Terrell <terrelln@fb.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Monnet <quentin@isovalent.com> Cc: Song Liu <song@kernel.org> Cc: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/20220719170555.2576993-4-roberto.sassu@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25kbuild: dummy-tools: avoid tmpdir leak in dummy gccOndrej Mosnacek1-6/+2
commit aac289653fa5adf9e9985e4912c1d24a3e8cbab2 upstream. When passed -print-file-name=plugin, the dummy gcc script creates a temporary directory that is never cleaned up. To avoid cluttering $TMPDIR, instead use a static directory included in the source tree. Fixes: 76426e238834 ("kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ceph: don't leak snap_rwsem in handle_cap_grantJeff Layton1-14/+13
commit 58dd4385577ed7969b80cdc9e2a31575aba6c712 upstream. When handle_cap_grant is called on an IMPORT op, then the snap_rwsem is held and the function is expected to release it before returning. It currently fails to do that in all cases which could lead to a deadlock. Fixes: 6f05b30ea063 ("ceph: reset i_requested_max_size if file write is not wanted") Link: https://tracker.ceph.com/issues/55857 Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luís Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25tools/vm/slabinfo: use alphabetic order when two values are equalYuanzheng Song1-10/+22
commit 4f5ceb8851f0081af54313abbf56de1615911faf upstream. When the number of partial slabs in each cache is the same (e.g., the value are 0), the results of the `slabinfo -X -N5` and `slabinfo -P -N5` are different. / # slabinfo -X -N5 ... Slabs sorted by number of partial slabs --------------------------------------- Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg inode_cache 15180 392 6217728 758/0/1 20 1 0 95 a kernfs_node_cache 22494 88 2002944 488/0/1 46 0 0 98 shmem_inode_cache 663 464 319488 38/0/1 17 1 0 96 biovec-max 50 3072 163840 4/0/1 10 3 0 93 A dentry 19050 136 2600960 633/0/2 30 0 0 99 a / # slabinfo -P -N5 Name Objects Objsize Space Slabs/Part/Cpu O/S O %Fr %Ef Flg bdev_cache 32 984 32.7K 1/0/1 16 2 0 96 Aa ext4_inode_cache 42 752 32.7K 1/0/1 21 2 0 96 a dentry 19050 136 2.6M 633/0/2 30 0 0 99 a TCPv6 17 1840 32.7K 0/0/1 17 3 0 95 A RAWv6 18 856 16.3K 0/0/1 18 2 0 94 A This problem is caused by the sort_slabs(). So let's use alphabetic order when two values are equal in the sort_slabs(). By the way, the content of the `slabinfo -h` is not aligned because the `-P|--partial Sort by number of partial slabs` uses tabs instead of spaces. So let's use spaces instead of tabs to fix it. Link: https://lkml.kernel.org/r/20220528063117.935158-1-songyuanzheng@huawei.com Fixes: 1106b205a3fe ("tools/vm/slabinfo: add partial slab listing to -X") Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com> Cc: "Tobin C. Harding" <tobin@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ceph: use correct index when encoding client supported featuresLuís Henriques2-8/+5
commit fea013e020e6ecc7be75bea0d61697b7e916b44d upstream. Feature bits have to be encoded into the correct locations. This hasn't been an issue so far because the only hole in the feature bits was in bit 10 (CEPHFS_FEATURE_RECLAIM_CLIENT), which is located in the 2nd byte. When adding more bits that go beyond the this 2nd byte, the bug will show up. [xiubli: remove incorrect comment for CEPHFS_FEATURES_CLIENT_SUPPORTED] Fixes: 9ba1e224538a ("ceph: allocate the correct amount of extra bytes for the session features") Signed-off-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25dt-bindings: clock: qcom,gcc-msm8996: add more GCC clock sourcesDmitry Baryshkov1-0/+16
commit 2b4e75a7a7c8d3531a40ebb103b92f88ff693f79 upstream. Add additional GCC clock sources. This includes PCIe and USB PIPE and UFS symbol clocks. Fixes: 2a8aa18c1131 ("dt-bindings: clk: qcom: Fix self-validation, split, and clean cruft") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220620071936.1558906-2-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25dt-bindings: arm: qcom: fix MSM8916 MTP compatiblesKrzysztof Kozlowski1-1/+1
commit bb35fe1efbae4114bd288fae0f56070f563adcfc upstream. The order of compatibles for MSM8916 MTP board is different: msm8916-mtp.dtb: /: compatible: 'oneOf' conditional failed, one must be fixed: ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916'] is too long Fixes: 9d3ef77fe568 ("dt-bindings: arm: Convert QCom board/soc bindings to json-schema") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220520123252.365762-3-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25vsock: Set socket state back to SS_UNCONNECTED in vsock_connect_timeout()Peilin Ye1-0/+1
commit a3e7b29e30854ed67be0d17687e744ad0c769c4b upstream. Imagine two non-blocking vsock_connect() requests on the same socket. The first request schedules @connect_work, and after it times out, vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps *socket* state as SS_CONNECTING. Later, the second request returns -EALREADY, meaning the socket "already has a pending connection in progress", even though the first request has already timed out. As suggested by Stefano, fix it by setting *socket* state back to SS_UNCONNECTED, so that the second request will return -ETIMEDOUT. Suggested-by: Stefano Garzarella <sgarzare@redhat.com> Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25vsock: Fix memory leak in vsock_connect()Peilin Ye1-1/+8
commit 7e97cfed9929eaabc41829c395eb0d1350fccb9d upstream. An O_NONBLOCK vsock_connect() request may try to reschedule @connect_work. Imagine the following sequence of vsock_connect() requests: 1. The 1st, non-blocking request schedules @connect_work, which will expire after 200 jiffies. Socket state is now SS_CONNECTING; 2. Later, the 2nd, blocking request gets interrupted by a signal after a few jiffies while waiting for the connection to be established. Socket state is back to SS_UNCONNECTED, but @connect_work is still pending, and will expire after 100 jiffies. 3. Now, the 3rd, non-blocking request tries to schedule @connect_work again. Since @connect_work is already scheduled, schedule_delayed_work() silently returns. sock_hold() is called twice, but sock_put() will only be called once in vsock_connect_timeout(), causing a memory leak reported by syzbot: BUG: memory leak unreferenced object 0xffff88810ea56a40 (size 1232): comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 (..@............ backtrace: [<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930 [<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989 [<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734 [<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203 [<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468 [<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline] [<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561 [<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline] [<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline] [<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568 [<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae <...> Use mod_delayed_work() instead: if @connect_work is already scheduled, reschedule it, and undo sock_hold() to keep the reference count balanced. Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Co-developed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25plip: avoid rcu debug splatFlorian Westphal1-1/+1
commit bc3c8fe3c79bcdae4d90e3726054fac5cca8ac32 upstream. WARNING: suspicious RCU usage 5.2.0-rc2-00605-g2638eb8b50cfc #1 Not tainted drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage! plip_open is called with RTNL held, switch to the correct helper. Fixes: 2638eb8b50cf ("net: ipv4: provide __rcu annotation for ifa_list") Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25ipv6: do not use RT_TOS for IPv6 flowlabelMatthias May1-2/+1
commit ab7e2e0dfa5d37540ab1dc5376e9a2cb9188925d upstream. According to Guillaume Nault RT_TOS should never be used for IPv6. Quote: RT_TOS() is an old macro used to interprete IPv4 TOS as described in the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4 code, although, given the current state of the code, most of the existing calls have no consequence. But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS" field to be interpreted the RFC 1349 way. There's no historical compatibility to worry about. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Matthias May <matthias.may@westermo.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-09-03 15:09:57 +0300