Age | Commit message (Collapse) | Author | Files | Lines |
|
commit 5fddf8962b429b8303c4a654291ecb6e61a7d747 upstream.
Update mediator contact information in CoC interpretation document.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221011171417.34286-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 222cfa0118aa68687ace74aab8fdf77ce8fbd7e6 upstream.
pci_get_device() will increase the reference count for the returned
pci_dev. We need to use pci_dev_put() to decrease the reference count
before amd_probe() returns. There is no problem for the 'smbus_dev ==
NULL' branch because pci_dev_put() can also handle the NULL input
parameter case.
Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
timeout
commit 096cc0cddf58232bded309336961784f1d1c85f8 upstream.
The SD card is recognized failed sometimes when resume from suspend.
Because CD# debounce time too long then card present report wrong.
Finally, card is recognized failed.
Signed-off-by: Chevron Li <chevron.li@bayhubtech.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 39a72dbfe188291b156dd6523511e3d5761ce775 upstream.
In mmc_select_voltage(), if there is no full power cycle, the voltage
range selected at the end of the function will be on a single range
(e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V),
the mask shift should be reduced by 1.
This issue was triggered by using a specific SD-card (Verbatim Premium
16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes
and there is no power cycle. And the card was failing to switch to
high-speed mode. When adding the range 3.2V/3.3V for this card with the
proposed shift change, the card can switch to high-speed mode.
Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards")
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65946690ed8d972fdb91a74ee75ac0f0f0d68321 upstream.
The coreboot_table driver registers a coreboot bus while probing a
"coreboot_table" device representing the coreboot table memory region.
Probing this device (i.e., registering the bus) is a dependency for the
module_init() functions of any driver for this bus (e.g.,
memconsole-coreboot.c / memconsole_driver_init()).
With synchronous probe, this dependency works OK, as the link order in
the Makefile ensures coreboot_table_driver_init() (and thus,
coreboot_table_probe()) completes before a coreboot device driver tries
to add itself to the bus.
With asynchronous probe, however, coreboot_table_probe() may race with
memconsole_driver_init(), and so we're liable to hit one of these two:
1. coreboot_driver_register() eventually hits "[...] the bus was not
initialized.", and the memconsole driver fails to register; or
2. coreboot_driver_register() gets past #1, but still races with
bus_register() and hits some other undefined/crashing behavior (e.g.,
in driver_find() [1])
We can resolve this by registering the bus in our initcall, and only
deferring "device" work (scanning the coreboot memory region and
creating sub-devices) to probe().
[1] Example failure, using 'driver_async_probe=*' kernel command line:
[ 0.114217] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010
...
[ 0.114307] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.1.0-rc1 #63
[ 0.114316] Hardware name: Google Scarlet (DT)
...
[ 0.114488] Call trace:
[ 0.114494] _raw_spin_lock+0x34/0x60
[ 0.114502] kset_find_obj+0x28/0x84
[ 0.114511] driver_find+0x30/0x50
[ 0.114520] driver_register+0x64/0x10c
[ 0.114528] coreboot_driver_register+0x30/0x3c
[ 0.114540] memconsole_driver_init+0x24/0x30
[ 0.114550] do_one_initcall+0x154/0x2e0
[ 0.114560] do_initcall_level+0x134/0x160
[ 0.114571] do_initcalls+0x60/0xa0
[ 0.114579] do_basic_setup+0x28/0x34
[ 0.114588] kernel_init_freeable+0xf8/0x150
[ 0.114596] kernel_init+0x2c/0x12c
[ 0.114607] ret_from_fork+0x10/0x20
[ 0.114624] Code: 5280002b 1100054a b900092a f9800011 (885ffc01)
[ 0.114631] ---[ end trace 0000000000000000 ]---
Fixes: b81e3140e412 ("firmware: coreboot: Make bus registration symmetric")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20221019180934.1.If29e167d8a4771b0bf4a39c89c6946ed764817b9@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7fc961cf7ffcb130c4e93ee9a5628134f9de700a upstream.
SRS cap is the hardware cap telling if the hardware IOMMU can support
requests seeking supervisor privilege or not. SRE bit in scalable-mode
PASID table entry is treated as Reserved(0) for implementation not
supporting SRS cap.
Checking SRS cap before setting SRE bit can avoid the non-recoverable
fault of "Non-zero reserved field set in PASID Table Entry" caused by
setting SRE bit while there is no SRS cap support. The fault messages
look like below:
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Read NO_PASID] Request device [00:0d.0] fault addr 0x1154e1000
[fault reason 0x5a]
SM: Non-zero reserved field set in PASID Table Entry
Fixes: 6f7db75e1c46 ("iommu/vt-d: Add second level page table interface")
Cc: stable@vger.kernel.org
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20221115070346.1112273-1-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20221116051544.26540-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0954256e970ecf371b03a6c9af2cf91b9c4085ff upstream.
We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache
the FSF request ID when sending a new FSF request. This is used in case the
sending fails and we need to remove the request from our internal hash
table again (so we don't keep an invalid reference and use it when we free
the request again).
In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32
bit wide), but the rest of the zfcp code (and the firmware specification)
handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x
ELF ABI]). For one this has the obvious problem that when the ID grows
past 32 bit (this can happen reasonably fast) it is truncated to 32 bit
when storing it in the cache variable and so doesn't match the original ID
anymore. The second less obvious problem is that even when the original ID
has not yet grown past 32 bit, as soon as the 32nd bit is set in the
original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we
cast it back to 'unsigned long'. As the cached variable is of a signed
type, the compiler will choose a sign-extending instruction to load the 32
bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once
we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the
request again all the leading zeros will be flipped to ones to extend the
sign and won't match the original ID anymore (this has been observed in
practice).
If we can't successfully remove the request from the hash table again after
'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify
the adapter about new work because the adapter is already gone during
e.g. a ChpID toggle) we will end up with a double free. We unconditionally
free the request in the calling function when 'zfcp_fsf_req_send()' fails,
but because the request is still in the hash table we end up with a stale
memory reference, and once the zfcp adapter is either reset during recovery
or shutdown we end up freeing the same memory twice.
The resulting stack traces vary depending on the kernel and have no direct
correlation to the place where the bug occurs. Here are three examples that
have been seen in practice:
list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00)
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:62!
monitor event: 0040 ilc:2 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded
Hardware name: ...
Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6
0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8
00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800
00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70
Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336
00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8
#00000003cbeea1f4: af000000 mc 0,0
>00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78
00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48
00000003cbeea204: b9040043 lgr %r4,%r3
00000003cbeea208: b9040051 lgr %r5,%r1
00000003cbeea20c: b9040032 lgr %r3,%r2
Call Trace:
[<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140
([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140)
[<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp]
[<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp]
[<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp]
[<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp]
[<00000003cb5eece8>] kthread+0x138/0x150
[<00000003cb557f3c>] __ret_from_fork+0x3c/0x60
[<00000003cc4172ea>] ret_from_fork+0xa/0x40
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<00000003cc3e9d04>] _printk+0x4c/0x58
Kernel panic - not syncing: Fatal exception: panic_on_oops
or:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803
Fault in home space mode while using kernel ASCE.
AS:0000000063b10007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ...
CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded
Hardware name: ...
Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp])
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8
0000000000000000 0000000000000055 0000000000000000 00000000a8515800
0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c
000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48
Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8
000003ff7febaf82: e32020000004 lg %r2,0(%r2)
#000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8
>000003ff7febaf8e: e3b020100020 cg %r11,16(%r2)
000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82
000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8
000003ff7febaf9e: e31020080004 lg %r1,8(%r2)
000003ff7febafa4: e33020000004 lg %r3,0(%r2)
Call Trace:
[<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp]
[<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp]
[<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp]
[<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128
[<000000006292f300>] __do_softirq+0x130/0x3c0
[<0000000061d906c6>] irq_exit_rcu+0xfe/0x118
[<000000006291e818>] do_io_irq+0xc8/0x168
[<000000006292d516>] io_int_handler+0xd6/0x110
[<000000006292d596>] psw_idle_exit+0x0/0xa
([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0)
[<000000006292ceea>] default_idle_call+0x52/0xf8
[<0000000061de4fa4>] do_idle+0xd4/0x168
[<0000000061de51fe>] cpu_startup_entry+0x36/0x40
[<0000000061d4faac>] smp_start_secondary+0x12c/0x138
[<000000006292d88e>] restart_int_handler+0x6e/0x90
Last Breaking-Event-Address:
[<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp]
Kernel panic - not syncing: Fatal exception in interrupt
or:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803
Fault in home space mode while using kernel ASCE.
AS:0000000077c40007 R3:0000000000000024
Oops: 0038 ilc:3 [#1] SMP
Modules linked in: ...
CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded
Hardware name: ...
Workqueue: kblockd blk_mq_run_work_fn
Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20
0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20
00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6
00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0
Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa
0000000076fc0308: b904001b lgr %r1,%r11
#0000000076fc030c: e3106020001a algf %r1,32(%r6)
>0000000076fc0312: e31010000082 xg %r1,0(%r1)
0000000076fc0318: b9040001 lgr %r0,%r1
0000000076fc031c: e30061700082 xg %r0,368(%r6)
0000000076fc0322: ec59000100d9 aghik %r5,%r9,1
0000000076fc0328: e34003b80004 lg %r4,952
Call Trace:
[<0000000076fc0312>] __kmalloc+0xd2/0x398
[<0000000076f318f2>] mempool_alloc+0x72/0x1f8
[<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp]
[<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp]
[<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp]
[<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod]
[<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208
[<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8
[<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod]
[<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818
[<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0
[<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218
[<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90
[<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0
[<0000000076da6d74>] process_one_work+0x274/0x4d0
[<0000000076da7018>] worker_thread+0x48/0x560
[<0000000076daef18>] kthread+0x140/0x160
[<000000007751d144>] ret_from_fork+0x28/0x30
Last Breaking-Event-Address:
[<0000000076fc0474>] __kmalloc+0x234/0x398
Kernel panic - not syncing: Fatal exception: panic_on_oops
To fix this, simply change the type of the cache variable to 'unsigned
long', like the rest of zfcp and also the argument for
'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension
and so can successfully remove the request from the hash table.
Fixes: e60a6d69f1f8 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe")
Cc: <stable@vger.kernel.org> #v2.6.34+
Signed-off-by: Benjamin Block <bblock@linux.ibm.com>
Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com
Reviewed-by: Steffen Maier <maier@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8678ea06852cd1f819b870c773d43df888d15d46 upstream.
If a page fault occurs while copying the first byte, this function resets one
byte before dst.
As a consequence, an address could be modified and leaded to kernel crashes if
case the modified address was accessed later.
Fixes: b58294ead14c ("maccess: allow architectures to provide kernel probing directly")
Signed-off-by: Alban Crequy <albancrequy@linux.microsoft.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Francis Laniel <flaniel@linux.microsoft.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org> [5.8]
Link: https://lore.kernel.org/bpf/20221110085614.111213-2-albancrequy@linux.microsoft.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b8ebf250997c5fb253582f42bfe98673801ebebd upstream.
syzbot is reporting uninitialized value at iforce_init_device() [1], for
commit 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer
when fetching device IDs") is checking that valid length is shorter than
bytes to read. Since iforce_get_id_packet() stores valid length when
returning 0, the caller needs to check that valid length is longer than or
equals to bytes to read.
Reported-by: syzbot <syzbot+4dd880c1184280378821@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6ac0aec6b0a6 ("Input: iforce - allow callers supply data buffer when fetching device IDs")
Link: https://lore.kernel.org/r/531fb432-7396-ad37-ecba-3e42e7f56d5c@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1bfcbe5805d0cfc83c3544dcd01e0a282c1f6790 upstream.
If the platform doesn't use DMA device filter (as is the case with
Elkhart Lake), whole lpss8250_dma_setup() setup is skipped. This
results in skipping also *_maxburst setup which is undesirable.
Refactor lpss8250_dma_setup() to configure DMA even if filter is not
setup.
Cc: stable <stable@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221108121952.5497-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1980860e0c8299316cddaf0992dd9e1258ec9d88 upstream.
Returning true from handle_rx_dma() without flushing DMA first creates
a data ordering hazard. If DMA Rx has handled any character at the
point when RLSI occurs, the non-DMA path handles any pending characters
jumping them ahead of those characters that are pending under DMA.
Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221108121952.5497-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a931237cbea256aff13bb403da13a97b2d1605d9 upstream.
DW UART sometimes triggers IIR_RDI during DMA Rx when IIR_RX_TIMEOUT
should have been triggered instead. Since IIR_RDI has higher priority
than IIR_RX_TIMEOUT, this causes the Rx to hang into interrupt loop.
The problem seems to occur at least with some combinations of
small-sized transfers (I've reproduced the problem on Elkhart Lake PSE
UARTs).
If there's already an on-going Rx DMA and IIR_RDI triggers, fall
graciously back to non-DMA Rx. That is, behave as if IIR_RX_TIMEOUT had
occurred.
8250_omap already considers IIR_RDI similar to this change so its
nothing unheard of.
Fixes: 75df022b5f89 ("serial: 8250_dma: Fix RX handling")
Cc: <stable@vger.kernel.org>
Co-developed-by: Srikanth Thokala <srikanth.thokala@intel.com>
Signed-off-by: Srikanth Thokala <srikanth.thokala@intel.com>
Co-developed-by: Aman Kumar <aman.kumar@intel.com>
Signed-off-by: Aman Kumar <aman.kumar@intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221108121952.5497-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4fe1ec995483737f3d2a14c3fe1d8fe634972979 upstream.
__list_versions will first estimate the required space using the
"dm_target_iterate(list_version_get_needed, &needed)" call and then will
fill the space using the "dm_target_iterate(list_version_get_info,
&iter_info)" call. Each of these calls locks the targets using the
"down_read(&_lock)" and "up_read(&_lock)" calls, however between the first
and second "dm_target_iterate" there is no lock held and the target
modules can be loaded at this point, so the second "dm_target_iterate"
call may need more space than what was the first "dm_target_iterate"
returned.
The code tries to handle this overflow (see the beginning of
list_version_get_info), however this handling is incorrect.
The code sets "param->data_size = param->data_start + needed" and
"iter_info.end = (char *)vers+len" - "needed" is the size returned by the
first dm_target_iterate call; "len" is the size of the buffer allocated by
userspace.
"len" may be greater than "needed"; in this case, the code will write up
to "len" bytes into the buffer, however param->data_size is set to
"needed", so it may write data past the param->data_size value. The ioctl
interface copies only up to param->data_size into userspace, thus part of
the result will be truncated.
Fix this bug by setting "iter_info.end = (char *)vers + needed;" - this
guarantees that the second "dm_target_iterate" call will write only up to
the "needed" buffer and it will exit with "DM_BUFFER_FULL_FLAG" if it
overflows the "needed" space - in this case, userspace will allocate a
larger buffer and retry.
Note that there is also a bug in list_version_get_needed - we need to add
"strlen(tt->name) + 1" to the needed size, not "strlen(tt->name)".
Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 741cec30cc52058d1c10d415f3b98319887e4f73 upstream.
Don't hardcode the ms5611 SPI speed, limit it instead.
Signed-off-by: Mitja Spes <mitja@lxnav.com>
Fixes: c0644160a8b5 ("iio: pressure: add support for MS5611 pressure and temperature sensor")
Link: https://lore.kernel.org/r/20221021135827.1444793-3-mitja@lxnav.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca1547ab15f48dc81624183ae17a2fd1bad06dfc upstream.
Add sentinel at end of maps to avoid potential array out of
bound access in iio core.
Fixes: 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver")
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20221029093000.45451-4-sravanhome@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1eb20332a082fa801fb89c347c5e62de916a4001 upstream.
Input voltage channel enum is compared against iio address instead
of the channel.
Fixes: 7abd9fb64682 ("iio: adc: mp2629: Add support for mp2629 ADC driver")
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221029093000.45451-2-sravanhome@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit efa17e90e1711bdb084e3954fa44afb6647331c0 upstream.
dev_set_name() allocates memory for name, it need be freed
when device_add() fails, call put_device() to give up the
reference that hold in device_initialize(), so that it can
be freed in kobject_cleanup() when the refcount hit to 0.
Fault injection test can trigger this:
unreferenced object 0xffff8e8340a7b4c0 (size 32):
comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s)
hex dump (first 32 bytes):
69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge
72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............
backtrace:
[<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360
[<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0
[<000000003636c520>] kstrdup+0x2d/0x60
[<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90
[<0000000092efe493>] dev_set_name+0x4e/0x70
Fixes: 1f785681a870 ("staging:iio:trigger sysfs userspace trigger rework.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221022074212.1386424-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65f20301607d07ee279b0804d11a05a62a6c1a1c upstream.
If iio_trigger_register() returns error, it should call iio_trigger_free()
to give up the reference that hold in iio_trigger_alloc(), so that it can
call iio_trig_release() to free memory when the refcount hit to 0.
Fixes: 0e589d5fb317 ("ARM: AT91: IIO: Add AT91 ADC driver.")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221024084511.815096-1-yangyingliang@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40bf8f162d0f95e0716e479d7db41443d931765c upstream.
There is no point to enter safe mode during DP/TBT configuration
if the DP/TBT was already configured in mux. This is because safe
mode is only applicable when there is a need to reconfigure the
pins in order to avoid damage within/to port partner.
In some chrome systems, IOM/mux is already configured before OS
comes up. Thus, when driver is probed, it blindly enters safe
mode due to PD negotiations but only after gfx driver lowers
dp_phy_ownership, will the IOM complete safe mode and send an
ack to PMC.
Since, that never happens, we see IPC timeout.
Hence, allow safe mode only when pin reconfiguration is not
required, which makes sense.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Cc: stable <stable@kernel.org>
Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221024171611.181468-1-rajat.khandelwal@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a58b8d6021426b796eebfae80983374d9a80a75 upstream.
There is a deadlock in ci_otg_del_timer(), the process is
shown below:
(thread 1) | (thread 2)
ci_otg_del_timer() | ci_otg_hrtimer_func()
... |
spin_lock_irqsave() //(1) | ...
... |
hrtimer_cancel() | spin_lock_irqsave() //(2)
(block forever)
We hold ci->lock in position (1) and use hrtimer_cancel() to
wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func()
also need ci->lock in position (2). As a result, the
hrtimer_cancel() in ci_otg_del_timer() will be blocked forever.
This patch extracts hrtimer_cancel() from the protection of
spin_lock_irqsave() in order that the ci_otg_hrtimer_func()
could obtain the ci->lock.
What`s more, there will be no race happen. Because the
"next_timer" is always under the protection of
spin_lock_irqsave() and we only check whether "next_timer"
equals to NUM_OTG_FSM_TIMERS in the following code.
Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 181135bb20dcb184edd89817831b888eb8132741 upstream.
Before adding this quirk, this (mechanical keyboard) device would not be
recognized, logging:
new full-speed USB device number 56 using xhci_hcd
unable to read config index 0 descriptor/start: -32
chopping to 0 config(s)
It would take dozens of plugging/unpuggling cycles for the keyboard to
be recognized. Keyboard seems to simply work after applying this quirk.
This issue had been reported by users in two places already ([1], [2])
but nobody tried upstreaming a patch yet. After testing I believe their
suggested fix (DELAY_INIT + NO_LPM + DEVICE_QUALIFIER) was probably a
little overkill. I assume this particular combination was tested because
it had been previously suggested in [3], but only NO_LPM seems
sufficient for this device.
[1]: https://qiita.com/float168/items/fed43d540c8e2201b543
[2]: https://blog.kostic.dev/posts/making-the-realforce-87ub-work-with-usb30-on-Ubuntu/
[3]: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1678477
Cc: stable@vger.kernel.org
Signed-off-by: Nicolas Dumazet <ndumazet@google.com>
Link: https://lore.kernel.org/r/20221109122946.706036-1-ndumazet@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 148f4b32b4504d8a32cf82049b7b9499a4b299ab upstream.
Add support for the following Fibocom FM160 composition:
0x0111: MBIM + MODEM + DIAG + AT
T: Bus=01 Lev=02 Prnt=125 Port=01 Cnt=02 Dev#= 93 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2cb7 ProdID=0111 Rev= 5.04
S: Manufacturer=Fibocom
S: Product=Fibocom FM160 Modem_SN:12345678
S: SerialNumber=12345678
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Reinhard Speyerer <rspmn@arcor.de>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c1547f12df8b8e9ca2686accee43213ecd117efe upstream.
Add LARA-L6 PIDs for three different USB compositions.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In default mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
In RmNet mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: RMNET interface
In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
[ johan: drop PID defines in favour of comments ]
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d9e37a5c4d80ea25a7171ab8557a449115554e76 upstream.
The official LARA-R6 (00B) modem uses 0x908b PID. LARA-R6 00B does not
implement a QMI interface on port 4, the reservation (RSVD(4)) has been
added to meet other companies that implement QMI on that interface.
LARA-R6 00B USB composition exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parser/alternative functions
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2ec106b96afc19698ff934323b633c0729d4c7f8 upstream.
Remove the UBLOX_PRODUCT_R6XX 0x90fa association since LARA-R6 00B final
product uses a new USB composition with different PID. 0x90fa PID used
only by LARA-R6 internal prototypes.
Move 0x90fa PID directly in the option_ids array since used by other
Qualcomm based modem vendors as pointed out in:
https://lore.kernel.org/all/6572c4e6-d8bc-b8d3-4396-d879e4e76338@gmail.com
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df3414b0a245f43476061fddd78cee7d6cff797f upstream.
Add support for the AT and diag ports, similar to other qualcomm SDX55
modems. In QDL mode, the modem uses a different device ID and support
is provided by qcserial in commit 11c52d250b34 ("USB: serial: qcserial:
add EM9191 QDL support").
T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=1199 ProdID=90d3 Rev=00.06
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM9191
S: SerialNumber=xxxxxxxxxxxxxxxx
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none)
Signed-off-by: Benoît Monin <benoit.monin@gmx.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cd136706b4f925aa5d316642543babac90d45910 upstream.
What the code does is to not check the return value from
devm_gpiod_get() and then avoid using an erroneous GPIO descriptor
with IS_ERR_OR_NULL().
This will miss real errors from the GPIO core that should not be
ignored, such as probe deferral.
Instead request the GPIO as explicitly optional, which means that
if it doesn't exist, the descriptor returned will be NULL.
Then we can add error handling and also avoid just doing this on
the device tree path, and simplify the site where the optional
GPIO descriptor is used.
There were some problems with cleaning up this GPIO descriptor
use in the past, but this is the proper way to deal with it.
Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20221107090753.1404679-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0fc801f8018000c8e64a275a20cb1da7c54e46df upstream.
This patch fixes a segfault by adding a null check on synth in
speakup_con_update(). The segfault can be reproduced as follows:
- Login into a text console
- Load speakup and speakup_soft modules
- Remove speakup_soft
- Switch to a graphics console
This is caused by lack of a null check on `synth` in
speakup_con_update().
Here's the sequence that causes the segfault:
- When we remove the speakup_soft, synth_release() sets the synth
to null.
- After that, when we change the virtual console to graphics
console, vt_notifier_call() is fired, which then calls
speakup_con_update().
- Inside speakup_con_update() there's no null check on synth,
so it calls synth_printf().
- Inside synth_printf(), synth_buffer_add() and synth_start(),
both access synth, when it is null and causing a segfault.
Therefore adding a null check on synth solves the issue.
Fixes: 2610df41489f ("staging: speakup: Add pause command used on switching to graphical mode")
Cc: stable <stable@kernel.org>
Signed-off-by: Mushahid Hussain <mushi.shar@gmail.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/20221010165720.397042-1-mushi.shar@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9c1939627f8185dec8ba6d741e9573a4c7a5834 upstream.
Correct few frequencies in presence rate table - multiplied by 10
(110250 instead of 11025 Hz).
Fixes: abb9c9b8b51b ("slimbus: stream: add stream support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220929165202.410937-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c294de36e7fb3e0cba0c4e1ef9a5f57bc080d0f upstream.
This reverts commit 6000b8d900cd5f52fbcd0776d0cc396e88c8c2ea.
The offending commit disabled the USB core PHY management as the dwc3
already manages the PHYs in question.
Unfortunately some platforms have started relying on having USB core
also controlling the PHY and this is specifically currently needed on
some Exynos platforms for PHY calibration or connected device may fail
to enumerate.
The PHY calibration was previously handled in the dwc3 driver, but to
work around some issues related to how the dwc3 driver interacts with
xhci (e.g. using multiple drivers) this was moved to USB core by commits
34c7ed72f4f0 ("usb: core: phy: add support for PHY calibration") and
a0a465569b45 ("usb: dwc3: remove generic PHY calibrate() calls").
The same PHY obviously should not be controlled from two different
places, which for example do no agree on the PHY mode or power state
during suspend, but as the offending patch was backported to stable,
let's revert it for now.
Reported-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/lkml/808bdba846bb60456adf10a3016911ee@agner.ch/
Fixes: 6000b8d900cd ("usb: dwc3: disable USB core PHY management")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20221103144648.14197-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1abfd71ee8f3ed99c5d0df5d9843a360541d6808 upstream.
Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID
144d:c1a6 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b18a456330e1c1ca207b57b45872f10336741388 upstream.
The Samsung Galaxy Book Pro seems to have the same issue as a few
other Samsung laptops, detailed in kernel bug report 207423. Sound from
headphone jack works, but not the built-in speakers.
alsa-info: http://alsa-project.org/db/?f=b40ba609dc6ae28dc84ad404a0d8a4bbcd8bea6d
Signed-off-by: Emil Flink <emil.flink@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115144500.7782-1-emil.flink@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad72c3c3f6eb81d2cb189ec71e888316adada5df upstream.
snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation. That is, the check itself is valid and snd_BUG_ON()
should be dropped from there. Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it.
Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kprobe_event_gen_test_exit()
commit 22ea4ca9631eb137e64e5ab899e9c89cb6670959 upstream.
When test_gen_kprobe_cmd() failed after kprobe_event_gen_cmd_end(), it
will goto delete, which will call kprobe_event_delete() and release the
corresponding resource. However, the trace_array in gen_kretprobe_test
will point to the invalid resource. Set gen_kretprobe_test to NULL
after called kprobe_event_delete() to prevent null-ptr-deref.
BUG: kernel NULL pointer dereference, address: 0000000000000070
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 246 Comm: modprobe Tainted: G W
6.1.0-rc1-00174-g9522dc5c87da-dirty #248
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:__ftrace_set_clr_event_nolock+0x53/0x1b0
Code: e8 82 26 fc ff 49 8b 1e c7 44 24 0c ea ff ff ff 49 39 de 0f 84 3c
01 00 00 c7 44 24 18 00 00 00 00 e8 61 26 fc ff 48 8b 6b 10 <44> 8b 65
70 4c 8b 6d 18 41 f7 c4 00 02 00 00 75 2f
RSP: 0018:ffffc9000159fe00 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88810971d268 RCX: 0000000000000000
RDX: ffff8881080be600 RSI: ffffffff811b48ff RDI: ffff88810971d058
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001
R10: ffffc9000159fe58 R11: 0000000000000001 R12: ffffffffa0001064
R13: ffffffffa000106c R14: ffff88810971d238 R15: 0000000000000000
FS: 00007f89eeff6540(0000) GS:ffff88813b600000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000070 CR3: 000000010599e004 CR4: 0000000000330ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__ftrace_set_clr_event+0x3e/0x60
trace_array_set_clr_event+0x35/0x50
? 0xffffffffa0000000
kprobe_event_gen_test_exit+0xcd/0x10b [kprobe_event_gen_test]
__x64_sys_delete_module+0x206/0x380
? lockdep_hardirqs_on_prepare+0xd8/0x190
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f89eeb061b7
Link: https://lore.kernel.org/all/20221108015130.28326-3-shangxiaojing@huawei.com/
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kprobe_event_gen_test_exit()
commit e0d75267f59d7084e0468bd68beeb1bf9c71d7c0 upstream.
When trace_get_event_file() failed, gen_kretprobe_test will be assigned
as the error code. If module kprobe_event_gen_test is removed now, the
null pointer dereference will happen in kprobe_event_gen_test_exit().
Check if gen_kprobe_test or gen_kretprobe_test is error code or NULL
before dereference them.
BUG: kernel NULL pointer dereference, address: 0000000000000012
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 2210 Comm: modprobe Not tainted
6.1.0-rc1-00171-g2159299a3b74-dirty #217
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:kprobe_event_gen_test_exit+0x1c/0xb5 [kprobe_event_gen_test]
Code: Unable to access opcode bytes at 0xffffffff9ffffff2.
RSP: 0018:ffffc900015bfeb8 EFLAGS: 00010246
RAX: ffffffffffffffea RBX: ffffffffa0002080 RCX: 0000000000000000
RDX: ffffffffa0001054 RSI: ffffffffa0001064 RDI: ffffffffdfc6349c
RBP: ffffffffa0000000 R08: 0000000000000004 R09: 00000000001e95c0
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000800
R13: ffffffffa0002420 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f56b75be540(0000) GS:ffff88813bc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffff9ffffff2 CR3: 000000010874a006 CR4: 0000000000330ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__x64_sys_delete_module+0x206/0x380
? lockdep_hardirqs_on_prepare+0xd8/0x190
? syscall_enter_from_user_mode+0x1c/0x50
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/all/20221108015130.28326-2-shangxiaojing@huawei.com/
Fixes: 64836248dda2 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1b5f1c34d3f5a664a57a5a7557a50e4e3cc2505c upstream.
In register_synth_event(), if set_synth_event_print_fmt() failed, then
both trace_remove_event_call() and unregister_trace_event() will be
called, which means the trace_event_call will call
__unregister_trace_event() twice. As the result, the second unregister
will causes the wild-memory-access.
register_synth_event
set_synth_event_print_fmt failed
trace_remove_event_call
event_remove
if call->event.funcs then
__unregister_trace_event (first call)
unregister_trace_event
__unregister_trace_event (second call)
Fix the bug by avoiding to call the second __unregister_trace_event() by
checking if the first one is called.
general protection fault, probably for non-canonical address
0xfbd59c0000000024: 0000 [#1] SMP KASAN PTI
KASAN: maybe wild-memory-access in range
[0xdead000000000120-0xdead000000000127]
CPU: 0 PID: 3807 Comm: modprobe Not tainted
6.1.0-rc1-00186-g76f33a7eedb4 #299
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:unregister_trace_event+0x6e/0x280
Code: 00 fc ff df 4c 89 ea 48 c1 ea 03 80 3c 02 00 0f 85 0e 02 00 00 48
b8 00 00 00 00 00 fc ff df 4c 8b 63 08 4c 89 e2 48 c1 ea 03 <80> 3c 02
00 0f 85 e2 01 00 00 49 89 2c 24 48 85 ed 74 28 e8 7a 9b
RSP: 0018:ffff88810413f370 EFLAGS: 00010a06
RAX: dffffc0000000000 RBX: ffff888105d050b0 RCX: 0000000000000000
RDX: 1bd5a00000000024 RSI: ffff888119e276e0 RDI: ffffffff835a8b20
RBP: dead000000000100 R08: 0000000000000000 R09: fffffbfff0913481
R10: ffffffff8489a407 R11: fffffbfff0913480 R12: dead000000000122
R13: ffff888105d050b8 R14: 0000000000000000 R15: ffff888105d05028
FS: 00007f7823e8d540(0000) GS:ffff888119e00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7823e7ebec CR3: 000000010a058002 CR4: 0000000000330ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__create_synth_event+0x1e37/0x1eb0
create_or_delete_synth_event+0x110/0x250
synth_event_run_command+0x2f/0x110
test_gen_synth_cmd+0x170/0x2eb [synth_event_gen_test]
synth_event_gen_test_init+0x76/0x9bc [synth_event_gen_test]
do_one_initcall+0xdb/0x480
do_init_module+0x1cf/0x680
load_module+0x6a50/0x70a0
__do_sys_finit_module+0x12f/0x1c0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lkml.kernel.org/r/20221117012346.22647-3-shangxiaojing@huawei.com
Fixes: 4b147936fa50 ("tracing: Add support for 'synthetic' events")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Cc: stable@vger.kernel.org
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: <fengguang.wu@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a4527fef9afe5c903c718d0cd24609fe9c754250 upstream.
test_gen_synth_cmd() only free buf in fail path, hence buf will leak
when there is no failure. Add kfree(buf) to prevent the memleak. The
same reason and solution in test_empty_synth_event().
unreferenced object 0xffff8881127de000 (size 2048):
comm "modprobe", pid 247, jiffies 4294972316 (age 78.756s)
hex dump (first 32 bytes):
20 67 65 6e 5f 73 79 6e 74 68 5f 74 65 73 74 20 gen_synth_test
20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 64 5f pid_t next_pid_
backtrace:
[<000000004254801a>] kmalloc_trace+0x26/0x100
[<0000000039eb1cf5>] 0xffffffffa00083cd
[<000000000e8c3bc8>] 0xffffffffa00086ba
[<00000000c293d1ea>] do_one_initcall+0xdb/0x480
[<00000000aa189e6d>] do_init_module+0x1cf/0x680
[<00000000d513222b>] load_module+0x6a50/0x70a0
[<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0
[<00000000b36c4c0f>] do_syscall_64+0x3f/0x90
[<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
unreferenced object 0xffff8881127df000 (size 2048):
comm "modprobe", pid 247, jiffies 4294972324 (age 78.728s)
hex dump (first 32 bytes):
20 65 6d 70 74 79 5f 73 79 6e 74 68 5f 74 65 73 empty_synth_tes
74 20 20 70 69 64 5f 74 20 6e 65 78 74 5f 70 69 t pid_t next_pi
backtrace:
[<000000004254801a>] kmalloc_trace+0x26/0x100
[<00000000d4db9a3d>] 0xffffffffa0008071
[<00000000c31354a5>] 0xffffffffa00086ce
[<00000000c293d1ea>] do_one_initcall+0xdb/0x480
[<00000000aa189e6d>] do_init_module+0x1cf/0x680
[<00000000d513222b>] load_module+0x6a50/0x70a0
[<000000001fd4d529>] __do_sys_finit_module+0x12f/0x1c0
[<00000000b36c4c0f>] do_syscall_64+0x3f/0x90
[<00000000bbf20cf3>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lkml.kernel.org/r/20221117012346.22647-2-shangxiaojing@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Cc: <fengguang.wu@intel.com>
Cc: stable@vger.kernel.org
Fixes: 9fe41efaca08 ("tracing: Add synth event generation test module")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 42fb0a1e84ff525ebe560e2baf9451ab69127e2b upstream.
Currently the way polling works on the ring buffer is broken. It will
return immediately if there's any data in the ring buffer whereas a read
will block until the watermark (defined by the tracefs buffer_percent file)
is hit.
That is, a select() or poll() will return as if there's data available,
but then the following read will block. This is broken for the way
select()s and poll()s are supposed to work.
Have the polling on the ring buffer also block the same way reads and
splice does on the ring buffer.
Link: https://lkml.kernel.org/r/20221020231427.41be3f26@gandalf.local.home
Cc: Linux Trace Kernel <linux-trace-kernel@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Primiano Tucci <primiano@google.com>
Cc: stable@vger.kernel.org
Fixes: 1e0d6714aceb7 ("ring-buffer: Do not wake up a splice waiter when page is not full")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56f4ca0a79a9f1af98f26c54b9b89ba1f9bcc6bd upstream.
rb_head_page_deactivate() expects cpu_buffer to contain a valid list of
->pages, so verify that the list is actually present before calling it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru
Cc: stable@vger.kernel.org
Fixes: 77ae365eca895 ("ring-buffer: make lockless")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 19ba6c8af9382c4c05dc6a0a79af3013b9a35cd0 upstream.
The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next}
of @ftrace_mode->list are NULL, it's not a valid state to call list_del().
If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free
tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del()
will write prev->next and next->prev, where null pointer dereference
happens.
BUG: kernel NULL pointer dereference, address: 0000000000000008
Oops: 0002 [#1] PREEMPT SMP NOPTI
Call Trace:
<TASK>
ftrace_mod_callback+0x20d/0x220
? do_filp_open+0xd9/0x140
ftrace_process_regex.isra.51+0xbf/0x130
ftrace_regex_write.isra.52.part.53+0x6e/0x90
vfs_write+0xee/0x3a0
? __audit_filter_op+0xb1/0x100
? auditd_test_task+0x38/0x50
ksys_write+0xa5/0xe0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Kernel panic - not syncing: Fatal exception
So call INIT_LIST_HEAD() to initialize the list member to fix this issue.
Link: https://lkml.kernel.org/r/20221116015207.30858-1-xiujianfeng@huawei.com
Cc: stable@vger.kernel.org
Fixes: 673feb9d76ab ("ftrace: Add :mod: caching infrastructure to trace_array")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bcea02b096333dc74af987cb9685a4dbdd820840 upstream.
If we can't allocate this size, try something smaller with half of the
size. Its order should be decreased by one instead of divided by two.
Link: https://lkml.kernel.org/r/20221109094434.84046-3-wangwensheng4@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: a79008755497d ("ftrace: Allocate the mcount record pages as groups")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 08948caebe93482db1adfd2154eba124f66d161d upstream.
If the number of mcount entries is an integer multiple of
ENTRIES_PER_PAGE, the page count showing on the console would be wrong.
Link: https://lkml.kernel.org/r/20221109094434.84046-2-wangwensheng4@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: stable@vger.kernel.org
Fixes: 5821e1b74f0d0 ("function tracing: fix wrong pos computing when read buffer has been fulfilled")
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a51e5d293dd1c2e7bf6f7be788466cd9b5d280fb ]
If the returning value of SMB2_set_info_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0967e5457954 ("cifs: use a compound for setting an xattr")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f524b7289bbb0c8ffaa2ba3c34c146e43da54fb2 ]
A problem about insmod thunderbolt-net failed is triggered with following
log given while lsmod does not show thunderbolt_net:
insmod: ERROR: could not insert module thunderbolt-net.ko: File exists
The reason is that tbnet_init() returns tb_register_service_driver()
directly without checking its return value, if tb_register_service_driver()
failed, it returns without removing property directory, resulting the
property directory can never be created later.
tbnet_init()
tb_register_property_dir() # register property directory
tb_register_service_driver()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without remove property directory
Fix by remove property directory when tb_register_service_driver() returns
error.
Fixes: e69b6c02b4c3 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 92bbd67a55fee50743b42825d1c016e7fd5c79f9 ]
The return value of CIFSGetExtAttr is negative, should be checked
with -EOPNOTSUPP rather than EOPNOTSUPP.
Fixes: 64a5cfa6db94 ("Allow setting per-file compression via SMB2/3")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2929cceb2fcf0ded7182562e4888afafece82cce ]
x25_lapb_receive_frame() using skb_copy() to get a private copy of
skb, the new skb should be freed in the undersized/fragmented skb
error handling path. Otherwise there is a memory leak.
Fixes: cb101ed2c3c7 ("x25: Handle undersized/fragmented skbs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Martin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20221114110519.514538-1-weiyongjun@huaweicloud.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
ag71xx_open()
[ Upstream commit c9b895c6878bdb6789dc1d7af60fd10f4a9f1937 ]
If ag71xx_hw_enable() fails, call phylink_disconnect_phy() to clean up.
And if phylink_of_phy_connect() fails, nothing needs to be done.
Compile tested only.
Fixes: 892e09153fa3 ("net: ag71xx: port to phylink")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221114095549.40342-1-liujian56@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d520de6cb42e88a1d008b54f935caf9fc05951da ]
If the returning value of SMB2_close_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352d96f3acc6 ("cifs: multichannel: move channel selection above transport layer")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2dbfb3f33350e1e868d3d7ed4c176d8777150878 ]
The current logic in the Intel PMC driver will forcefully attach it
when detecting any CPU on the intel_pmc_core_platform_ids array,
even if the matching ACPI device is not present.
There's no checking in pmc_core_probe() to assert that the PMC device
is present, and hence on virtualized environments the PMC device
probes successfully, even if the underlying registers are not present.
Before commit 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI
with CPUID enumeration") the driver would check for the presence of a
specific PCI device, and that prevented the driver from attaching when
running virtualized.
Fix by only forcefully attaching the PMC device when not running
virtualized. Note that virtualized platforms can still get the device
to load if the appropriate ACPI device is present on the tables
provided to the VM.
Make an exception for the Xen initial domain, which does have full
hardware access, and hence can attach to the PMC if present.
Fixes: 21ae43570940 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7a1598189228b5007369a9622ccdf587be0730f ]
The drbd_destroy_connection() frees the "connection" so use the _safe()
iterator to prevent a use after free.
Fixes: b6f85ef9538b ("drbd: Iterate over all connections")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/Y3Jd5iZRbNQ9w6gm@kili
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|