summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-08-25ASoC: SOF: Intel: hda: add sanity check on SSP index reported by NHLTPierre-Louis Bossart1-0/+7
[ Upstream commit e51699505042fb365df3a0ce68b850ccd9ad0108 ] We should have a limited trust in the BIOS and verify that the SSP index reported in NHLT is valid for each platform. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220725195343.145603-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ALSA: hda/realtek: Enable speaker and mute LEDs for HP laptopsKai-Heng Feng1-0/+2
[ Upstream commit c578d5da10dc429c6676ab09f3fec0b79b31633a ] Two more HP laptops that use cs35l41 AMP for speaker and GPIO for mute LEDs. So use the existing quirk to enable them accordingly. [ Sort the entries at the SSID order by tiwai ] Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220719142015.244426-1-kai.heng.feng@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25RISC-V: Add fast call path of crash_kexec()Xianting Tian1-0/+4
[ Upstream commit 3f1901110a89b0e2e13adb2ac8d1a7102879ea98 ] Currently, almost all archs (x86, arm64, mips...) support fast call of crash_kexec() when "regs && kexec_should_crash()" is true. But RISC-V not, it can only enter crash system via panic(). However panic() doesn't pass the regs of the real accident scene to crash_kexec(), it caused we can't get accurate backtrace via gdb, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 console_unlock () at kernel/printk/printk.c:2557 2557 if (do_cond_resched) (gdb) bt #0 console_unlock () at kernel/printk/printk.c:2557 #1 0x0000000000000000 in ?? () With the patch we can get the accurate backtrace, $ riscv64-linux-gnu-gdb vmlinux vmcore Reading symbols from vmlinux... [New LWP 95] #0 0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 81 *(int *)p = 0xdead; (gdb) (gdb) bt #0 0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81 #1 0x0000000000000000 in ?? () Test code to produce NULL address dereference in test_crash.c, void *p = NULL; *(int *)p = 0xdead; Reviewed-by: Guo Ren <guoren@kernel.org> Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com> Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com> Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25riscv: mmap with PROT_WRITE but no PROT_READ is invalidCeleste Liu1-3/+2
[ Upstream commit 2139619bcad7ac44cc8f6f749089120594056613 ] As mentioned in Table 4.5 in RISC-V spec Volume 2 Section 4.3, write but not read is "Reserved for future use.". For now, they are not valid. In the current code, -wx is marked as invalid, but -w- is not marked as invalid. This patch refines that judgment. Reported-by: xctan <xc-tan@outlook.com> Co-developed-by: dram <dramforever@live.com> Signed-off-by: dram <dramforever@live.com> Co-developed-by: Ruizhe Pan <c141028@gmail.com> Signed-off-by: Ruizhe Pan <c141028@gmail.com> Signed-off-by: Celeste Liu <coelacanthus@outlook.com> Link: https://lore.kernel.org/r/PH7PR14MB559464DBDD310E755F5B21E8CEDC9@PH7PR14MB5594.namprd14.prod.outlook.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: nau8821: Don't unconditionally free interruptMark Brown1-10/+0
[ Upstream commit 2d86cef353b8f3d20b16f8c5615742fd6938c801 ] The remove() operation unconditionally frees the interrupt for the device but we may not actually have an interrupt so there might be nothing to free. Since the interrupt is requested after all other resources we don't need the explicit free anyway, unwinding is guaranteed to be safe, so just delete the remove() function and let devm take care of things. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220718140405.57233-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25riscv: dts: canaan: Add k210 topology informationConor Dooley1-0/+12
[ Upstream commit d9d193dea8666bbf69fc21c5bdcdabaa34a466e3 ] The k210 has no cpu-map node, so tools like hwloc cannot correctly parse the topology. Add the node using the existing node labels. Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Link: https://github.com/open-mpi/hwloc/issues/536 Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20220705190435.1790466-6-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25riscv: dts: sifive: Add fu740 topology informationConor Dooley1-0/+24
[ Upstream commit bf6cd1c01c959a31002dfa6784c0d8caffed4cf1 ] The fu740 has no cpu-map node, so tools like hwloc cannot correctly parse the topology. Add the node using the existing node labels. Reported-by: Brice Goglin <Brice.Goglin@inria.fr> Link: https://github.com/open-mpi/hwloc/issues/536 Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20220705190435.1790466-4-mail@conchuod.ie Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: rsnd: care default case on rsnd_ssiu_busif_err_irq_ctrl()Kuninori Morimoto1-0/+2
[ Upstream commit ef30911d3c39fd57884c348c29b9cbff88def155 ] Before, ssiu.c didn't care SSI5-8, thus, commit b1384d4c95088d0 ("ASoC: rsnd: care default case on rsnd_ssiu_busif_err_status_clear()") cares it for status clear. But we should care it for error irq handling, too. This patch cares it. Reported-by: Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com> Reported-by: Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: SOF: sof-client-probes: Only load the driver if IPC3 is usedPeter Ujfalusi1-0/+4
[ Upstream commit 9b93eda355089b36482f7a2f134bdd24be70f907 ] The current implementation of probes only supports IPC3 and should not be loaded for other IPC implementation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20220712131022.1124-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: SOF: Intel: hda-ipc: Do not process IPC reply before firmware bootPeter Ujfalusi1-14/+25
[ Upstream commit 499cc881b09c8283ab5e75b0d6d21cb427722161 ] It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3. Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220712122357.31282-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: SOF: Intel: cnl: Do not process IPC reply before firmware bootPeter Ujfalusi1-13/+24
[ Upstream commit acacd9eefd0def5a83244d88e5483b5f38ee7287 ] It is not yet clear, but it is possible to create a firmware so broken that it will send a reply message before a FW_READY message (it is not yet clear if FW_READY will arrive later). Since the reply_data is allocated only after the FW_READY message, this will lead to a NULL pointer dereference if not filtered out. The issue was reported with IPC4 firmware but the same condition is present for IPC3. Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220712122357.31282-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25modules: Ensure natural alignment for .altinstructions and __bug_table sectionsHelge Deller1-0/+2
[ Upstream commit 87c482bdfa79f378297d92af49cdf265be199df5 ] In the kernel image vmlinux.lds.S linker scripts the .altinstructions and __bug_table sections are 4- or 8-byte aligned because they hold 32- and/or 64-bit values. Most architectures use altinstructions and BUG() or WARN() in modules as well, but in the module linker script (module.lds.S) those sections are currently missing. As consequence the linker will store their content byte-aligned by default, which then can lead to unnecessary unaligned memory accesses by the CPU when those tables are processed at runtime. Usually unaligned memory accesses are unnoticed, because either the hardware (as on x86 CPUs) or in-kernel exception handlers (e.g. on parisc or sparc) emulate and fix them up at runtime. Nevertheless, such unaligned accesses introduce a performance penalty and can even crash the kernel if there is a bug in the unalignment exception handlers (which happened once to me on the parisc architecture and which is why I noticed that issue at all). This patch fixes a non-critical issue and might be backported at any time. It's trivial and shouldn't introduce any regression because it simply tells the linker to use a different (8-byte alignment) for those sections by default. Signed-off-by: Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/all/Yr8%2Fgr8e8I7tVX4d@p100/ Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ALSA: hda: Fix page fault in snd_hda_codec_shutdown()Cezary Rojewski1-21/+20
[ Upstream commit 980b3a8790b402e959a6d773b38b771019682be1 ] If early probe of HDAudio bus driver fails e.g.: due to missing firmware file, snd_hda_codec_shutdown() ends in manipulating uninitialized codec->pcm_list_head causing page fault. Iinitialization of HDAudio codec in ASoC is split in two: - snd_hda_codec_device_init() - snd_hda_codec_device_new() snd_hda_codec_device_init() is called during probe_codecs() by HDAudio bus driver while snd_hda_codec_device_new() is called by codec-component's ->probe(). The second call will not happen until all components required by related sound card are present within the ASoC framework. With firmware failing to load during the PCI's deferred initialization i.e.: probe_work(), no platform components are ever registered. HDAudio codec enumeration is done at that point though, so the codec components became registered to ASoC framework, calling snd_hda_codec_device_init() in the process. Now, during platform reboot snd_hda_codec_shutdown() is called for every codec found on the HDAudio bus causing oops if any of them has not completed both of their initialization steps. Relocating field initialization fixes the issue. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220706120230.427296-7-cezary.rojewski@intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ASoC: Intel: avs: Set max DMA segment sizeAmadeusz Sławiński1-0/+1
[ Upstream commit 8544eebc78c96f1834a46b26ade3e7ebe785d10c ] Apparently it is possible for code to allocate large buffers which may cause warnings as reported in [1]. This was fixed for HDA, SOF and skylake in patchset [2], fix it also for avs driver. [1] https://github.com/thesofproject/linux/issues/3430 [2] https://lore.kernel.org/all/20220215132756.31236-1-tiwai@suse.de/ Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20220707124153.1858249-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25iommu/io-pgtable-arm-v7s: Add a quirk to allow pgtable PA up to 35bitYunfei Wang2-24/+66
[ Upstream commit bfdd231374181254742c5e2faef0bef2d30c0ee4 ] Single memory zone feature will remove ZONE_DMA32 and ZONE_DMA and cause pgtable PA size larger than 32bit. Since Mediatek IOMMU hardware support at most 35bit PA in pgtable, so add a quirk to allow the PA of pgtables support up to bit35. Signed-off-by: Ning Li <ning.li@mediatek.com> Signed-off-by: Yunfei Wang <yf.wang@mediatek.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220630092927.24925-2-yf.wang@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_startLiang He1-1/+2
[ Upstream commit 7a9f743ceead60ed454c46fbc3085ee9a79cbebb ] We should call of_node_put() for the reference 'uctl_node' returned by of_get_parent() which will increase the refcount. Otherwise, there will be a refcount leak bug. Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25vfio: Clear the caps->buf to NULL after freeSchspa Shi1-0/+1
[ Upstream commit 6641085e8d7b3f061911517f79a2a15a0a21b97b ] On buffer resize failure, vfio_info_cap_add() will free the buffer, report zero for the size, and return -ENOMEM. As additional hardening, also clear the buffer pointer to prevent any chance of a double free. Signed-off-by: Schspa Shi <schspa@gmail.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25KVM: PPC: Book3S HV: Fix "rm_exit" entry in debugfs timingsFabiano Rosas1-11/+2
[ Upstream commit 9981bace85d816ed8724ac46e49285e8488d29e6 ] At debugfs/kvm/<pid>/vcpu0/timings we show how long each part of the code takes to run: $ cat /sys/kernel/debug/kvm/*-*/vcpu0/timings rm_entry: 123785 49398892 118 4898 rm_intr: 123780 6075890 22 390 rm_exit: 0 0 0 0 <-- NOK guest: 123780 46732919988 402 9997638 cede: 0 0 0 0 <-- OK, no cede napping in P9 The "rm_exit" is always showing zero because it is the last one and end_timing does not increment the counter of the previous entry. We can fix it by calling accumulate_time again instead of end_timing. That way the counter gets incremented. The rest of the arithmetic can be ignored because there are no timing points after this and the accumulators are reset before the next round. Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20220525130554.2614394-2-farosas@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25tty: serial: Fix refcount leak bug in ucc_uart.cLiang He1-0/+2
[ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ] In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Acked-by: Timur Tabi <timur@kernel.org> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25lib/list_debug.c: Detect uninitialized listsGuenter Roeck1-2/+10
[ Upstream commit 0cc011c576aaa4de505046f7a6c90933d7c749a9 ] In some circumstances, attempts are made to add entries to or to remove entries from an uninitialized list. A prime example is amdgpu_bo_vm_destroy(): It is indirectly called from ttm_bo_init_reserved() if that function fails, and tries to remove an entry from a list. However, that list is only initialized in amdgpu_bo_create_vm() after the call to ttm_bo_init_reserved() returned success. This results in crashes such as BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1479 Comm: chrome Not tainted 5.10.110-15768-g29a72e65dae5 Hardware name: Google Grunt/Grunt, BIOS Google_Grunt.11031.149.0 07/15/2020 RIP: 0010:__list_del_entry_valid+0x26/0x7d ... Call Trace: amdgpu_bo_vm_destroy+0x48/0x8b ttm_bo_init_reserved+0x1d7/0x1e0 amdgpu_bo_create+0x212/0x476 ? amdgpu_bo_user_destroy+0x23/0x23 ? kmem_cache_alloc+0x60/0x271 amdgpu_bo_create_vm+0x40/0x7d amdgpu_vm_pt_create+0xe8/0x24b ... Check if the list's prev and next pointers are NULL to catch such problems. Link: https://lkml.kernel.org/r/20220531222951.92073-1-linux@roeck-us.net Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ext4: avoid resizing to a partial cluster sizeKiselev, Oleg1-0/+10
[ Upstream commit 69cb8e9d8cd97cdf5e293b26d70a9dee3e35e6bd ] This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock. Signed-off-by: Oleg Kiselev <okiselev@amazon.com> Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ext4: block range must be validated before use in ext4_mb_clear_bb()Lukas Czerner1-1/+20
[ Upstream commit 1e1c2b86ef86a8477fd9b9a4f48a6bfe235606f6 ] Block range to free is validated in ext4_free_blocks() using ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb(). However in some situations on bigalloc file system the range might be adjusted after the validation in ext4_free_blocks() which can lead to troubles on corrupted file systems such as one found by syzkaller that resulted in the following BUG kernel BUG at fs/ext4/ext4.h:3319! PREEMPT SMP NOPTI CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1.fc35 04/01/2014 RIP: 0010:ext4_free_blocks+0x95e/0xa90 Call Trace: <TASK> ? lock_timer_base+0x61/0x80 ? __es_remove_extent+0x5a/0x760 ? __mod_timer+0x256/0x380 ? ext4_ind_truncate_ensure_credits+0x90/0x220 ext4_clear_blocks+0x107/0x1b0 ext4_free_data+0x15b/0x170 ext4_ind_truncate+0x214/0x2c0 ? _raw_spin_unlock+0x15/0x30 ? ext4_discard_preallocations+0x15a/0x410 ? ext4_journal_check_start+0xe/0x90 ? __ext4_journal_start_sb+0x2f/0x110 ext4_truncate+0x1b5/0x460 ? __ext4_journal_start_sb+0x2f/0x110 ext4_evict_inode+0x2b4/0x6f0 evict+0xd0/0x1d0 ext4_enable_quotas+0x11f/0x1f0 ext4_orphan_cleanup+0x3de/0x430 ? proc_create_seq_private+0x43/0x50 ext4_fill_super+0x295f/0x3ae0 ? snprintf+0x39/0x40 ? sget_fc+0x19c/0x330 ? ext4_reconfigure+0x850/0x850 get_tree_bdev+0x16d/0x260 vfs_get_tree+0x25/0xb0 path_mount+0x431/0xa70 __x64_sys_mount+0xe2/0x120 do_syscall_64+0x5b/0x80 ? do_user_addr_fault+0x1e2/0x670 ? exc_page_fault+0x70/0x170 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fdf4e512ace Fix it by making sure that the block range is properly validated before used every time it changes in ext4_free_blocks() or ext4_mb_clear_bb(). Link: https://syzkaller.appspot.com/bug?id=5266d464285a03cee9dbfda7d2452a72c3c2ae7c Reported-by: syzbot+15cd994e273307bf5cfa@syzkaller.appspotmail.com Signed-off-by: Lukas Czerner <lczerner@redhat.com> Cc: Tadeusz Struk <tadeusz.struk@linaro.org> Tested-by: Tadeusz Struk <tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220714165903.58260-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ext4: avoid remove directory when directory is corruptedYe Bin1-5/+2
[ Upstream commit b24e77ef1c6d4dbf42749ad4903c97539cc9755a ] Now if check directoy entry is corrupted, ext4_empty_dir may return true then directory will be removed when file system mounted with "errors=continue". In order not to make things worse just return false when directory is corrupted. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25drivers:md:fix a potential use-after-free bugWentao_Liang1-1/+1
[ Upstream commit 104212471b1c1817b311771d817fb692af983173 ] In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function. Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25nvmet-tcp: fix lockdep complaint on nvmet_tcp_wq flush during queue teardownSagi Grimberg1-1/+2
[ Upstream commit 533d2e8b4d5e4c89772a0adce913525fb86cbbee ] We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are sending/receiving for the socket from works on this workqueue. Also this eliminates lockdep complaints: -- [ 6174.010200] workqueue: WQ_MEM_RECLAIM nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing !WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp] [ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628 check_flush_dependency+0x110/0x14c Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25md/raid5: Make logic blocking check consistent with logic that blocksLogan Gunthorpe1-1/+1
[ Upstream commit 6e3f50d30af847bebce072182bd735e90a294c6a ] The check in raid5_make_request differs very slightly from the logic that causes it to block lower down. This likely does not cause a bug as the check is fuzzy anyway (as reshape may move on between the first check and the subsequent check). However, make it consistent so it can be cleaned up in a subsequent patch. The condition which causes the schedule is: !(mddev->reshape_backwards ? logical_sector < conf->reshape_progress : logical_sector >= conf->reshape_progress) && (mddev->reshape_backwards ? logical_sector < conf->reshape_safe : logical_sector >= conf->reshape_safe) The condition that causes the early bailout is made to match this. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25md: Notify sysfs sync_completed in md_reap_sync_thread()Logan Gunthorpe1-0/+1
[ Upstream commit 9973f0fa7d20269fe6fefe6333997fb5914449c1 ] The mdadm test 07layouts randomly produces a kernel hung task deadlock. The deadlock is caused by the suspend_lo/suspend_hi files being set by the mdadm background process during reshape and not being cleared because the process hangs. (Leaving aside the issue of the fragility of freezing kernel tasks by buggy userspace processes...) When the background mdadm process hangs it, is waiting (without a timeout) on a change to the sync_completed file signalling that the reshape has completed. The process is woken up a couple times when the reshape finishes but it is woken up before MD_RECOVERY_RUNNING is cleared so sync_completed_show() reports 0 instead of "none". To fix this, notify the sysfs file in md_reap_sync_thread() after MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes it to continue and write to suspend_lo/suspend_hi to allow IO to continue. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25phy: samsung: phy-exynos-pcie: sanitize init/power_on callbacksMarek Szyprowski1-16/+9
[ Upstream commit f2812227bb07e2eaee74253f11cea1576945df31 ] The exynos-pcie driver called phy_power_on() before phy_init() for some historical reasons. However the generic PHY framework assumes that the proper sequence is to call phy_init() first, then phy_power_on(). The operations done by both functions should be considered as one action and as such they are called by the exynos-pcie driver (without doing anything between them). The initialization is just a sequence of register writes, which cannot be altered without breaking the hardware operation. To match the generic PHY framework requirement, simply move all register writes to the phy_init()/phy_exit() and drop power_on()/power_off() callbacks. This way the driver will also work with the old (incorrect) PHY initialization call sequence. Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas <helgaas@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Chanho Park <chanho61.park@samsung.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-By: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25openrisc: io: Define iounmap argument as volatileStafford Horne2-2/+2
[ Upstream commit 52e0ea900202d23843daee8f7089817e81dd3dd7 ] When OpenRISC enables PCI it allows for more drivers to be compiled resulting in exposing the following with -Werror. drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe': drivers/video/fbdev/riva/fbdev.c:2062:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe': drivers/video/fbdev/nvidia/nvidia.c:1414:20: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free': drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type Most architectures define the iounmap argument to be volatile. To fix this issue we do the same for OpenRISC. This patch must go before PCI is enabled on OpenRISC to avoid any compile failures. Link: https://lore.kernel.org/lkml/20220729033728.GA2195022@roeck-us.net/ Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25Revert "RDMA/rxe: Create duplicate mapping tables for FMRs"Li Zhijian5-162/+104
[ Upstream commit 1e75550648da1fa1cd1969e7597355de8fe8caf6 ] Below 2 commits will be reverted: commit 8ff5f5d9d8cf ("RDMA/rxe: Prevent double freeing rxe_map_set()") commit 647bf13ce944 ("RDMA/rxe: Create duplicate mapping tables for FMRs") The community has a few bug reports which pointed this commit at last. Some proposals are raised up in the meantime but all of them have no follow-up operation. The previous commit led the map_set of FMR to be not available any more if the MR is registered again after invalidating. Although the mentioned patch try to fix a potential race in building/accessing the same table for fast memory regions, it broke rtrs etc ULPs. Since the latter could be worse, revert this patch. With previous commit, it's observed that a same MR in rnbd server will trigger below code path: -> rxe_mr_init_fast() |-> alloc map_set() # map_set is uninitialized |...-> rxe_map_mr_sg() # build the map_set |-> rxe_mr_set_page() |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE that means # we can access host memory(such rxe_mr_copy) |...-> rxe_invalidate_mr() # mr->state change to FREE from VALID |...-> rxe_reg_fast_mr() # mr->state change to VALID from FREE, # but map_set was not built again |...-> rxe_mr_copy() # kernel crash due to access wild addresses # that lookup from the map_set The backtraces are not always identical. [1st]---------- RIP: 0010:lookup_iova+0x66/0xa0 [rdma_rxe] Code: 00 00 00 48 d3 ee 89 32 c3 4c 8b 18 49 8b 3b 48 8b 47 08 48 39 c6 72 38 48 29 c6 45 31 d2 b8 01 00 00 00 48 63 c8 48 c1 e1 04 <48> 8b 4c 0f 08 48 39 f1 77 21 83 c0 01 48 29 ce 3d 00 01 00 00 75 RSP: 0018:ffffb7ff80063bf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff9b9949d86800 RCX: 0000000000000000 RDX: ffffb7ff80063c00 RSI: 0000000049f6b378 RDI: 002818da00000004 RBP: 0000000000000120 R08: ffffb7ff80063c08 R09: ffffb7ff80063c04 R10: 0000000000000002 R11: ffff9b9916f7eef8 R12: ffff9b99488a0038 R13: ffff9b99488a0038 R14: ffff9b9914fb346a R15: ffff9b990ab27000 FS: 0000000000000000(0000) GS:ffff9b997dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007efc33a98ed0 CR3: 0000000014f32004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_mr_copy.part.0+0x6f/0x140 [rdma_rxe] rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] [2nd]---------- RIP: 0010:rxe_mr_copy.part.0+0xa8/0x140 [rdma_rxe] Code: 00 00 49 c1 e7 04 48 8b 00 4c 8d 2c d0 48 8b 44 24 10 4d 03 7d 00 85 ed 7f 10 eb 6c 89 54 24 0c 49 83 c7 10 31 c0 85 ed 7e 5e <49> 8b 3f 8b 14 24 4c 89 f6 48 01 c7 85 d2 74 06 48 89 fe 4c 89 f7 RSP: 0018:ffffae3580063bf8 EFLAGS: 00010202 RAX: 0000000000018978 RBX: ffff9d7ef7a03600 RCX: 0000000000000008 RDX: 000000000000007c RSI: 000000000000007c RDI: ffff9d7ef7a03600 RBP: 0000000000000120 R08: ffffae3580063c08 R09: ffffae3580063c04 R10: ffff9d7efece0038 R11: ffff9d7ec4b1db00 R12: ffff9d7efece0038 R13: ffff9d7ef4098260 R14: ffff9d7f11e23c6a R15: 4c79500065708144 FS: 0000000000000000(0000) GS:ffff9d7f3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fce47276c60 CR3: 0000000003f66004 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> rxe_responder+0x12ee/0x1b60 [rdma_rxe] ? rxe_icrc_check+0x7e/0x100 [rdma_rxe] ? rxe_rcv+0x1d0/0x780 [rdma_rxe] ? rxe_icrc_hdr.isra.0+0xf6/0x160 [rdma_rxe] rxe_do_task+0x67/0xb0 [rdma_rxe] rxe_xmit_packet+0xc7/0x210 [rdma_rxe] rxe_requester+0x680/0xee0 [rdma_rxe] ? update_load_avg+0x5f/0x690 ? update_load_avg+0x5f/0x690 ? rtrs_clt_recv_done+0x1b/0x30 [rtrs_client] rxe_do_task+0x67/0xb0 [rdma_rxe] tasklet_action_common.constprop.0+0x92/0xc0 __do_softirq+0xe1/0x2d8 run_ksoftirqd+0x21/0x30 smpboot_thread_fn+0x183/0x220 ? sort_range+0x20/0x20 kthread+0xe2/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Link: https://lore.kernel.org/r/1658805386-2-1-git-send-email-lizhijian@fujitsu.com Link: https://lore.kernel.org/all/20220210073655.42281-1-guoqing.jiang@linux.dev/T/ Link: https://www.spinics.net/lists/linux-rdma/msg110836.html Link: https://lore.kernel.org/lkml/94a5ea93-b8bb-3a01-9497-e2021f29598a@linux.dev/t/ Tested-by: Md Haris Iqbal <haris.iqbal@ionos.com> Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Li Zhijian <lizhijian@fujitsu.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failedUwe Kleine-König1-4/+1
[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ] It's not allowed to quit remove early without cleaning up completely. Otherwise this results in resource leaks that probably yield graver problems later. Here for example some tasklets might survive the lifetime of the sprd-dma device and access sdev which is freed after .remove() returns. As none of the device freeing requires an active device, just ignore the return value of pm_runtime_get_sync(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25dmaengine: tegra: Add terminate() for Tegra234Akhil R1-2/+24
[ Upstream commit 36834c67016794b8fa03d7672a5b7f2cc4529298 ] In certain cases where the DMA client bus gets corrupted or if the end device ceases to send/receive data, DMA can wait indefinitely for the data to be received/sent. Attempting to terminate the transfer will put the DMA in pause flush mode and it remains there. The channel is irrecoverable once this pause times out in Tegra194 and earlier chips. Whereas, from Tegra234, it can be recovered by disabling the channel and reprograming it. Hence add a new terminate() function that ignores the outcome of dma_pause() so that terminate_all() can proceed to disable the channel. Signed-off-by: Akhil R <akhilrajeev@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220720104045.16099-3-akhilrajeev@nvidia.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25selftests/kprobe: Do not test for GRP/ without event failuresSteven Rostedt (Google)1-1/+0
[ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ] A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached. That is: # echo 'p:foo/ vfs_read' > kprobe_events Will no longer error, but instead create an event: # cat kprobe_events p:foo/p_vfs_read_0 vfs_read This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected. Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@quicinc.com/ Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25csky/kprobe: reclaim insn_slot on kprobe unregistrationLiao Chang1-0/+4
[ Upstream commit a2310c74d418deca0f1d749c45f1f43162510f51 ] On kprobe registration kernel allocate one insn_slot for new kprobe, but it forget to reclaim the insn_slot on unregistration, leading to a potential leakage. Reported-by: Chen Guokai <chenguokai17@mails.ucas.ac.cn> Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Liao Chang <liaochang1@huawei.com> Signed-off-by: Guo Ren <guoren@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25RDMA/rxe: Limit the number of calls to each taskletBob Pearson2-4/+18
[ Upstream commit eff6d998ca297cb0b2e53b032a56cf8e04dd8b17 ] Limit the maximum number of calls to each tasklet from rxe_do_task() before yielding the cpu. When the limit is reached reschedule the tasklet and exit the calling loop. This patch prevents one tasklet from consuming 100% of a cpu core and causing a deadlock or soft lockup. Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25ACPI: PPTT: Leave the table mapped for the runtime usageSudeep Holla1-55/+47
[ Upstream commit 0c80f9e165f8f9cca743d7b6cbdb54362da297e0 ] Currently, everytime an information needs to be fetched from the PPTT, the table is mapped via acpi_get_table() and unmapped after the use via acpi_put_table() which is fine. However we do this at runtime especially when the CPU is hotplugged out and plugged in back since we re-populate the cache topology and other information. However, with the support to fetch LLC information from the PPTT in the cpuhotplug path which is executed in the atomic context, it is preferred to avoid mapping and unmapping of the PPTT for every single use as the acpi_get_table() might sleep waiting for a mutex. In order to avoid the same, the table is needs to just mapped once on the boot CPU and is never unmapped allowing it to be used at runtime with out the hassle of mapping and unmapping the table. Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> -- Hi Rafael, Sorry to bother you again on this PPTT changes. Guenter reported an issue with lockdep enabled in -next that include my cacheinfo/arch_topology changes to utilise LLC from PPTT in the CPU hotplug path. Please ack the change once you are happy so that I can get it merged with other fixes via Greg's tree. Regards, Sudeep Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20220720-arch_topo_fixes-v3-2-43d696288e84@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25mmc: renesas_sdhi: newer SoCs don't need manual tap correctionTakeshi Saito3-3/+9
[ Upstream commit 00e8c11c137b2e4b2bf54dc9881cf32e3441ddb4 ] The newest Gen3 SoCs and Gen4 SoCs do not need manual tap correction with HS400 anymore. So, instead of checking the SDHI version, add a quirk flag and set manual tap correction only for affected SoCs. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: rebased, renamed the quirk variable, removed stale comment] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220720072901.1266-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25dmaengine: dw-axi-dmac: ignore interrupt if no descriptorBen Dooks1-0/+6
[ Upstream commit 820f5ce999d2f99961e88c16d65cd26764df0590 ] If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220708170153.269991-4-ben.dooks@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25dmaengine: dw-axi-dmac: do not print NULL LLI during errorBen Dooks1-0/+5
[ Upstream commit 86cb0defe0e275453bc39e856bb523eb425a6537 ] During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this. Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Link: https://lore.kernel.org/r/20220708170153.269991-3-ben.dooks@sifive.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25of: overlay: Move devicetree_corrupt() check upGeert Uytterhoeven1-6/+5
[ Upstream commit e385b0ba6a137f34953e746d70d543660c2de1a0 ] There is no point in doing several preparatory steps in of_overlay_fdt_apply(), only to see of_overlay_apply() return early because of a corrupt device tree. Move the check for a corrupt device tree from of_overlay_apply() to of_overlay_fdt_apply(), to check for this as early as possible. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Tested-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/c91ce7112eb5167ea46a43d8a980e76b920010ba.1657893306.git.geert+renesas@glider.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setupsJason A. Donenfeld1-1/+16
[ Upstream commit dda520d07b95072a0b63f6c52a8eb566d08ea897 ] QEMU has a -no-reboot option, which halts instead of reboots when the guest asks to reboot. This is invaluable when used with CONFIG_PANIC_TIMEOUT=-1 (and panic_on_warn), because it allows panics and warnings to be caught immediately in CI. Implement this in UML too, by way of a basic setup param. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25PCI/ACPI: Guard ARM64-specific mcfg_quirksHuacai Chen1-0/+3
[ Upstream commit 40a6cc141b4b9580de140bcb3e893445708acc5d ] Guard ARM64-specific quirks with CONFIG_ARM64 to avoid build errors, since mcfg_quirks will be shared by more than one architectures. Link: https://lore.kernel.org/r/20220714124216.1489304-2-chenhuacai@loongson.cn Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25cxl: Fix a memory leak in an error handling pathChristophe JAILLET1-0/+1
[ Upstream commit 3a15b45b5454da862376b5d69a4967f5c6fa1368 ] A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the error handling path of afu_allocate_irqs(). Acked-by: Andrew Donnellan <ajd@linux.ibm.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.1657566849.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25pinctrl: intel: Check against matching data instead of ACPI companionAndy Shevchenko1-8/+6
[ Upstream commit c551bd81d198bf1dcd4398d5454acdc0309dbe77 ] In some cases we may get a platform device that has ACPI companion which is different to the pin control described in the ACPI tables. This is primarily happens when device is instantiated by board file. In order to allow this device being enumerated, refactor intel_pinctrl_get_soc_data() to check the matching data instead of ACPI companion. Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Henning Schild <henning.schild@siemens.com> Acked-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25scsi: ufs: ufs-exynos: Change ufs phy control sequenceChanho Park1-7/+10
[ Upstream commit 3d73b200f9893d8f5ba5d105e8b69c8d16744fa2 ] Since commit 1599069a62c6 ("phy: core: Warn when phy_power_on is called before phy_init"), the following warning has been reported: phy_power_on was called before phy_init To address this, we need to remove phy_power_on from exynos_ufs_phy_init() and move it after phy_init. phy_power_off and phy_exit are also necessary in exynos_ufs_remove(). Link: https://lore.kernel.org/r/20220706020255.151177-4-chanho61.park@samsung.com Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25mmc: tmio: avoid glitches when resettingWolfram Sang4-23/+42
[ Upstream commit 2e586f8a5b0ed4a525014a692923ac96f6647816 ] If we reset because of an error, we need to preserve values for the clock frequency. Otherwise, glitches may be seen on the bus. To achieve that, we introduce a 'preserve' parameter to the reset function and the IP core specific reset callbacks to handle everything accordingly. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25habanalabs/gaudi: mask constant value before castOded Gabbay1-4/+4
[ Upstream commit e3f49437a2e0221a387ecd192d742ae1434e1e3a ] This fixes a sparse warning of "cast truncates bits from constant value" Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25habanalabs/gaudi: fix shift out of boundsOfir Bitton1-7/+9
[ Upstream commit 01622098aeb05a5efbb727199bbc2a4653393255 ] When validating NIC queues, queue offset calculation must be performed only for NIC queues. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25habanalabs/gaudi: invoke device reset from one code blockTal Cohen1-9/+16
[ Upstream commit be572e67dafbf8004d46a2c9d97338c107efb60e ] In order to prepare the driver code for device reset event notification, change the event handler function flow to call device reset from one code block. In addition, the commit fixes an issue that reset was performed w/o checking the 'hard_reset_on_fw_event' state and w/o setting the HL_DRV_RESET_DELAY flag. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25habanalabs: add terminating NULL to attrs arraysDafna Hirschfeld3-0/+5
[ Upstream commit 78d503087be190eab36290644ccec050135e7c70 ] Arrays of struct attribute are expected to be NULL terminated. This is required by API methods such as device_add_groups. This fixes a crash when loading the driver for Goya device. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-07-25 16:14:57 +0300